- Devel - oVirt List Archives

what's up with ansible-runner-service-dev package?
by Fedor Gavrilov 01 Apr '20

01 Apr '20

Hi everyone, After I screwed up my dev environment beyond repair I have to set it up again and I see something I haven't last time (CentOS 7): $ sudo yum install ansible-runner-service-dev Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.hosting90.cz * centos-sclo-rh: mirror.hosting90.cz * centos-sclo-sclo: mirror.hosting90.cz * extras: mirror.hosting90.cz * ovirt-master-epel: mirror.hosting90.cz * ovirt-master-snapshot: ftp.nluug.nl * ovirt-master-snapshot-static: ftp.nluug.nl * updates: mirror.hosting90.cz No package ansible-runner-service-dev available. Maybe something's missing from my notes, but where did it go? Should I add some repo? Fedor

9 39

Re: ovirt-imageio error
by Nir Soffer 01 Apr '20

01 Apr '20

On Wed, Apr 1, 2020 at 3:25 PM Dana Elfassy <delfassy(a)redhat.com> wrote: Moving to deverl, since other people may have the same problem. We switched to ovirt-imageio 2.0.2 yesterday. The package should be available from ovirt repositories and for QE. > When I'm trying to install updates I'm getting the following error message: > "Depsolve Error occured: \n Problem: problem with installed package vdsm-4.40.10-1.el8.x86_64\n - package vdsm-4.40.10-1.el8.x86_64 > requires ovirt-imageio-daemon = 1.6.3, but none of the providers can be installed\n - package vdsm-4.40.9-1.el8.x86_64 requires ovirt-imageio-daemon = > 1.6.3, but none of the providers can be installed\n - cannot install both ovirt-imageio-daemon-2.0.2-0.el8.x86_64 and ovirt-imageio-daemon-1.6.3-0.20 > 2003041517.gitefb1267.el8.x86_64\n - cannot install both ovirt-imageio-daemon-2.0.2-0.el8.x86_64 and ovirt-imageio-daemon-1.6.3-0.el8.noarch\n - cann > ot install the best candidate for the job" > > The current version I have is > [root@dhcp-1-31 ~]# rpm -qa | grep "ovirt-imageio" > ovirt-imageio-common-1.6.3-0.202003041517.gitefb1267.el8.x86_64 > ovirt-imageio-daemon-1.6.3-0.202003041517.gitefb1267.el8.x86_64 > > I have tried to remove it (which requires installing ovirt-release-master again), and got the same error Is this centos or rhel system? If this is a rhel system the right place to discuss it is rhev-devel. For centos the packages are available here: https://resources.ovirt.org/pub/ovirt-master-snapshot/rpm/el8/x86_64/ If you have ovirt-release-master package installed: yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm The package should be available. This is the way we test installation in the CI. Nir

1 1

pep8 & checkstyle are here again to bring an end to humanity
by Fedor Gavrilov 01 Apr '20

01 Apr '20

I can't compile the engine. Not sure should I laugh or cry. But you shouldn't be able to compile too. https://github.com/oVirt/ovirt-engine/commit/3d9d3b0aee17ff20d3303fd9f63297… is to blame, once I cut the line compilation is able to proceed. Not sure how it will go with ansible-runner-service yet... :) Fedor

4 3

OST fails in 002_bootstrap_pytest.py - setup_storage.sh
by Nir Soffer 31 Mar '20

31 Mar '20

Looks like infrastructure issue setting up storage on engine host. Here are 2 failing builds with unrelated changes: https://jenkins.ovirt.org/job/ovirt-system-tests_manual/6677/ https://jenkins.ovirt.org/job/ovirt-system-tests_manual/6678/ Is this a known issue? Error Message AssertionError: setup_storage.sh failed. Exit code is 1 assert 1 == 0 -1 +0 Stacktrace prefix = <ovirtlago.prefix.OvirtPrefix object at 0x7f6fd2b998d0> @pytest.mark.run(order=14) def test_configure_storage(prefix): engine = prefix.virt_env.engine_vm() result = engine.ssh( [ '/tmp/setup_storage.sh', ], ) > assert result.code == 0, 'setup_storage.sh failed. Exit code is %s' % result.code E AssertionError: setup_storage.sh failed. Exit code is 1 E assert 1 == 0 E -1 E +0 The pytest traceback is nice, but in this case it is does not show any useful info. Since we run a script using ssh, the error message should include the process stdout and stderr which probably can explain the failure. Also I wonder why this code is called as a test (test_configure_storage). This looks like setup step so it should run as a fixture. Nir

4 15

Project gating (Zuul) is currently unavailable
by Ehud Yonasi 31 Mar '20

31 Mar '20

Hey everyone, Software factory (Zuul is one of their products) has been migrated to a new host, and because of it Zuul is currently unavailable. At the moment you can directly merge the projects that are currently being gated - OST + ovirt-provider-ovn. I will update you once the issue is resolved. Thanks, Ehud.

1 1

OST fails for unreachable repo 'alocalsync'
by Amit Bawer 30 Mar '20

30 Mar '20

Hi OST fails for unreachable repo 'alocalsync', Seen at https://jenkins.ovirt.org/job/ovirt-system-tests_manual/6706/testReport/bas… Thanks

1 0

Unable to run create-brick.yml from ansible runner dev
by Kaustav Majumder 27 Mar '20

27 Mar '20

Hi all, I am trying to run create-brick playbook from ansible-runner integrated inside ovirt-engine but it throws errors as ``` Running command: CreateBrickCommand internal: false. Entities affected : ID: 45b7ce67-9939-4d5f-a1ba-92411356b7e6 Type: VDSAction group MANIPULATE_HOST with role type ADMIN 2020-03-27 15:43:07,518+05 ERROR [org.ovirt.engine.core.common.utils.ansible.AnsibleExecutor] (default task-29) [5ff56203-33ca-424b-9137-491cf1ef2cd3] Exception: Failed to execute call to start playbook. 2020-03-27 15:43:07,519+05 ERROR [org.ovirt.engine.core.bll.gluster.CreateBrickCommand] (default task-29) [5ff56203-33ca-424b-9137-491cf1ef2cd3] Failed to execute Ansible create brick role. Please check logs for more details: /home/kmajumde/work/ovirt-engine-builds/27-03-global-vol-options/var/log/ovirt-engine/brick-setup/ovirt-gluster-brick-ansible-20200327154307-10.70.35.17-5ff56203-33ca-424b-9137-491cf1ef2cd3.log 2020-03-27 15:43:07,519+05 ERROR [org.ovirt.engine.core.bll.gluster.CreateBrickCommand] (default task-29) [5ff56203-33ca-424b-9137-491cf1ef2cd3] Command 'org.ovirt.engine.core.bll.gluster.CreateBrickCommand' failed: EngineException: Failed to execute Ansible create brick role. Please check logs for more details: /home/kmajumde/work/ovirt-engine-builds/27-03-global-vol-options/var/log/ovirt-engine/brick-setup/ovirt-gluster-brick-ansible-20200327154307-10.70.35.17-5ff56203-33ca-424b-9137-491cf1ef2cd3.log (Failed with error GeneralException and code 100) 2020-03-27 15:43:07,526+05 ERROR [org.ovirt.engine.core.bll.gluster.CreateBrickCommand] (default task-29) [5ff56203-33ca-424b-9137-491cf1ef2cd3] Transaction rolled-back for command 'org.ovirt.engine.core.bll.gluster.CreateBrickCommand'. 2020-03-27 15:43:07,530+05 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-29) [5ff56203-33ca-424b-9137-491cf1ef2cd3] EVENT_ID: CREATE_GLUSTER_BRICK_FAILED(4,139), Failed to create brick brick-1 on host 10.70.35.17 of cluster Default. ``` *The corresponding log is not created* kmajumde:~/work/git/ovirt-engine] global_vol_options+ 7s ± less /home/kmajumde/work/ovirt-engine-builds/27-03-global-vol-options/var/log/ovirt-engine/brick-setup/ovirt-gluster-brick-ansible-20200327154307-10.70.35.17-5ff56203-33ca-424b-9137-491cf1ef2cd3.log /home/kmajumde/work/ovirt-engine-builds/27-03-global-vol-options/var/log/ovirt-engine/brick-setup/ovirt-gluster-brick-ansible-20200327154307-10.70.35.17-5ff56203-33ca-424b-9137-491cf1ef2cd3.log: No such file or directory *checking ansible-runner status gives* *[kmajumde:~/work/git/ovirt-engine] global_vol_options+ 1m1s 130 ± systemctl status ansible-runner-service.service ● ansible-runner-service.service - Ansible Runner Service Loaded: loaded (/usr/lib/systemd/system/ansible-runner-service.service; disabled; vendor preset: disabled) Active: active (running) since Fri 2020-03-27 15:42:56 IST; 8min ago Main PID: 30097 (gunicorn-3) Tasks: 3 (limit: 4915) Memory: 62.1M CGroup: /system.slice/ansible-runner-service.service ├─30097 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 -w 2 runner_service.wsgi:application ├─30112 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 -w 2 runner_service.wsgi:application └─30123 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001 -w 2 runner_service.wsgi:applicationMar 27 15:42:58 localhost.localdomain gunicorn-3[30097]: Request received, content-type :NoneMar 27 15:42:58 localhost.localdomain gunicorn-3[30097]: 127.0.0.1 - GET /api/v1/hosts/10.70.35.1 <http://10.70.35.1>Mar 27 15:43:01 localhost.localdomain gunicorn-3[30097]: Request received, content-type :NoneMar 27 15:43:01 localhost.localdomain gunicorn-3[30097]: 127.0.0.1 - GET /api/v1/hosts/10.70.35.1 <http://10.70.35.1>Mar 27 15:43:03 localhost.localdomain gunicorn-3[30097]: Request received, content-type :NoneMar 27 15:43:03 localhost.localdomain gunicorn-3[30097]: 127.0.0.1 - GET /api/v1/hosts/10.70.35.1 <http://10.70.35.1>Mar 27 15:43:07 localhost.localdomain gunicorn-3[30097]: Request received, content-type :NoneMar 27 15:43:07 localhost.localdomain gunicorn-3[30097]: 127.0.0.1 - GET /api/v1/hosts/10.70.35.17 <http://10.70.35.17>Mar 27 15:43:07 localhost.localdomain gunicorn-3[30097]: Request received, content-type :application/json; charset=UTF-8Mar 27 15:43:07 localhost.localdomain gunicorn-3[30097]: 127.0.0.1 - POST /api/v1/playbooks/create-brick.yml* *Is there a way to find the root cause for this?* -- Thanks, Kaustav Majumder

4 13

ovirt-engine has been tagged (ovirt-engine-4.4.0_beta1)
by Sandro Bonazzola 27 Mar '20

27 Mar '20

ovirt-engine has been tagged (ovirt-engine-4.4.0_beta1) -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>* <https://www.redhat.com/en/summit?sc_cid=7013a000002D2QxAAK>* *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 0

[VDSM] VdsmClientTests.test_event_handler - flaky test?
by Nir Soffer 26 Mar '20

26 Mar '20

I had 2 of these unrelated failures today. Would be nice to mark this test as broken on CI. https://jenkins.ovirt.org/job/vdsm_standard-check-patch/19353//artifact/che… https://jenkins.ovirt.org/job/vdsm_standard-check-patch/19354//artifact/che… =================================== FAILURES =================================== ______________________ VdsmClientTests.test_event_handler ______________________ self = <stomprpcclient_test.VdsmClientTests testMethod=test_event_handler> def test_event_handler(self): with self._create_client() as client: event_queue = queue.Queue() sub_id = client.subscribe(EVENT_TOPIC, event_queue) > client.Test.sendEvent() lib/yajsonrpc/stomprpcclient_test.py:215: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <stomprpcclient_test._MockedClient object at 0x7fe19f6db1d0> namespace = 'Test', method_name = 'sendEvent', kwargs = {} method = 'Test.sendEvent', timeout = 3 req = {'jsonrpc': '2.0', 'method': 'Test.sendEvent', 'params': {}, 'id': 'c3985771-6f77-4431-9ed6-15082063a2d5'} responses = None def _call(self, namespace, method_name, **kwargs): """ Client call method, executes a given command Args: namespace (string): namespace name method_name (string): method name **kwargs: Arbitrary keyword arguments Returns: method result Raises: ClientError: in case of an error in the protocol. TimeoutError: if there is no response after a pre configured time. ServerError: in case of an error while executing the command """ method = namespace + "." + method_name timeout = kwargs.pop("_timeout", self._default_timeout) req = yajsonrpc.JsonRpcRequest( method, kwargs, reqId=str(uuid.uuid4())) try: responses = self._client.call( req, timeout=timeout, flow_id=self._flow_id) except EnvironmentError as e: raise ClientError(method, kwargs, e) if not responses: > raise TimeoutError(method, kwargs, timeout) E vdsm.client.TimeoutError: Request Test.sendEvent with args {} timed out after 3 seconds ../lib/vdsm/client.py:294: TimeoutError ------------------------------ Captured log call ------------------------------- WARNING vds.dispatcher:betterAsyncore.py:179 unhandled read event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled write event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled read event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled write event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled read event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled write event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled read event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled write event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled read event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled write event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled read event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled write event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled read event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled write event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled read event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled write event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled read event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled write event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled read event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled write event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled read event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled write event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled read event WARNING vds.dispatcher:betterAsyncore.py:179 unhandled write event ERROR vds.dispatcher:betterAsyncore.py:179 uncaptured python exception, closing channel <yajsonrpc.betterAsyncore.Dispatcher ('::1', 36398, 0, 0) at 0x7fe19f6db208> (<class 'ValueError'>:'b'ept-version:1.2'' contains illegal character ':' [/usr/lib64/python3.6/asyncore.py|readwrite|108] [/usr/lib64/python3.6/asyncore.py|handle_read_event|423] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/betterAsyncore.py|handle_read|71] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/betterAsyncore.py|_delegate_call|168] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/vdsm/protocoldetector.py|handle_read|129] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/stompserver.py|handle_socket|413] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/vdsm/rpc/bindingjsonrpc.py|add_socket|54] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/stompserver.py|createListener|379] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/stompserver.py|StompListener|345] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/betterAsyncore.py|__init__|47] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/betterAsyncore.py|switch_implementation|86] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/stompserver.py|init|363] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/vdsm/rpc/bindingjsonrpc.py|_onAccept|57] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/stomp.py|set_message_handler|645] [/usr/lib64/python3.6/asyncore.py|handle_read_event|423] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/betterAsyncore.py|handle_read|71] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/betterAsyncore.py|_delegate_call|168] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/stomp.py|handle_read|421] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/stomp.py|parse|323] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/stomp.py|_parse_command|245] [/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/stomp.py|decode_value|167]) WARNING vds.dispatcher:betterAsyncore.py:179 unhandled close event ERROR root:concurrent.py:267 FINISH thread <Thread(JsonRpc (StompReactor), started daemon 140606575712000)> failed Traceback (most recent call last): File "/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/vdsm/common/concurrent.py", line 260, in run ret = func(*args, **kwargs) File "/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/stompserver.py", line 393, in process_requests self._reactor.process_requests() File "/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/betterAsyncore.py", line 238, in process_requests timeout=self._get_timeout(self._map), File "/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/betterAsyncore.py", line 253, in _get_timeout interval = disp.next_check_interval() File "/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/betterAsyncore.py", line 99, in next_check_interval return getattr(self.__impl, "next_check_interval", default_func)() File "/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/stomp.py", line 486, in next_check_interval self.handle_timeout() File "/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/stomp.py", line 451, in handle_timeout self._frame_handler.handle_timeout(self) File "/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/stompclient.py", line 130, in handle_timeout dispatcher._on_timeout) File "/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/stomp.py", line 630, in reconnect AsyncDispatcher(self, self._async_client, count=count)) File "/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/betterAsyncore.py", line 271, in reconnect dispatcher.create_socket(address, sslctx) File "/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/yajsonrpc/betterAsyncore.py", line 112, in create_socket sock = sslctx.wrapSocket(sock) File "/home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/vdsm/sslutils.py", line 113, in wrapSocket ca_certs=self.ca_certs) File "/usr/lib64/python3.6/ssl.py", line 1114, in wrap_socket ciphers=ciphers) File "/usr/lib64/python3.6/ssl.py", line 704, in __init__ self._context.load_verify_locations(ca_certs) FileNotFoundError: [Errno 2] No such file or directory =============================== warnings summary =============================== /home/jenkins/workspace/vdsm_standard-check-patch/vdsm/.tox/lib/lib/python3.6/site-packages/_pytest/mark/structures.py:334 /home/jenkins/workspace/vdsm_standard-check-patch/vdsm/.tox/lib/lib/python3.6/site-packages/_pytest/mark/structures.py:334: PytestUnknownMarkWarning: Unknown pytest.mark.stress - is this a typo? You can register custom marks to avoid this warning - for details, see https://docs.pytest.org/en/latest/mark.html PytestUnknownMarkWarning, /home/jenkins/workspace/vdsm_standard-check-patch/vdsm/.tox/lib/lib/python3.6/site-packages/_pytest/mark/structures.py:334 /home/jenkins/workspace/vdsm_standard-check-patch/vdsm/.tox/lib/lib/python3.6/site-packages/_pytest/mark/structures.py:334: PytestUnknownMarkWarning: Unknown pytest.mark.slow - is this a typo? You can register custom marks to avoid this warning - for details, see https://docs.pytest.org/en/latest/mark.html PytestUnknownMarkWarning, /home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/vdsm/v2v.py:79 /home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/vdsm/v2v.py:79: DeprecationWarning: invalid escape sequence \d _SSH_AUTH_RE = b'(SSH_AUTH_SOCK)=([^;]+).*;\nSSH_AGENT_PID=(\d+)' /home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/vdsm/v2v.py:1421 /home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/vdsm/v2v.py:1421: DeprecationWarning: invalid escape sequence \^ '(?P<m2_base>[0-9]+){sp}\^{sp}(?P<m2_exp>{exp}))'.format( /home/jenkins/workspace/vdsm_standard-check-patch/vdsm/.tox/lib/lib/python3.6/site-packages/_pytest/mark/structures.py:334 /home/jenkins/workspace/vdsm_standard-check-patch/vdsm/.tox/lib/lib/python3.6/site-packages/_pytest/mark/structures.py:334: PytestUnknownMarkWarning: Unknown pytest.mark.xpass - is this a typo? You can register custom marks to avoid this warning - for details, see https://docs.pytest.org/en/latest/mark.html PytestUnknownMarkWarning, tests/lib/osinfo_test.py::test_package_versions /home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/vdsm/osinfo.py:284: UnicodeWarning: decode() called on unicode string, see https://bugzilla.redhat.com/show_bug.cgi?id=1693751 'version': mi['version'].decode('utf-8'), tests/lib/osinfo_test.py::test_package_versions /home/jenkins/workspace/vdsm_standard-check-patch/vdsm/lib/vdsm/osinfo.py:285: UnicodeWarning: decode() called on unicode string, see https://bugzilla.redhat.com/show_bug.cgi?id=1693751 'release': mi['release'].decode('utf-8'), -- Docs: https://docs.pytest.org/en/latest/warnings.html ----------- coverage: platform linux, python 3.6.8-final-0 ----------- Coverage HTML written to dir htmlcov-lib ========================== slowest 10 test durations =========================== 18.29s call tests/lib/yajsonrpc/stomprpcclient_test.py::VdsmClientTests::test_event_handler 2.96s call tests/lib/protocoldetector_test.py::AcceptorTests::test_reject_very_slow_client_concurrency(True) 2.90s call tests/lib/protocoldetector_test.py::AcceptorTests::test_reject_very_slow_client_concurrency(False) 2.75s call tests/lib/protocoldetector_test.py::AcceptorTests::test_reject_very_slow_client(False) 2.63s call tests/lib/protocoldetector_test.py::AcceptorTests::test_reject_very_slow_client(True) 1.90s call tests/pywatch_test.py::TestPyWatch::test_timeout_backtrace 1.44s call tests/pywatch_test.py::TestPyWatch::test_timeout_output 1.19s call tests/pywatch_test.py::TestPyWatch::test_kill_grandkids 0.93s call tests/lib/protocoldetector_test.py::AcceptorTests::test_detect_slow_client(True) 0.90s call tests/lib/yajsonrpc/stomp_test.py::StompTests::test_echo(16384, False) =========================== short test summary info ============================

3 9

packaging: setup: start ovn services on restore - broke make install-dev on fc30?
by Liran Rotenberg 26 Mar '20

26 Mar '20

Hi all, Running on fc30 with engine, suddenly when rebasing or being on master branch the command: $ make install-dev SKIP_CHECKS=1 PREFIX=$HOME/ovirt-engine DEV_EXTRA_BUILD_FLAGS_GWT_DEFAULTS="-Dgwt.userAgent=safari" -j8 Didn't pass, it showed to me no errors, after build success, I got: touch "tmp.built" make[2]: Leaving directory '/home/lrotenbe/git/ovirt-engine' make[1]: Leaving directory '/home/lrotenbe/git/ovirt-engine' make: *** [Makefile:584: all-dev] Error 2 $ make test Did pass. Burning time to figure out the situation, I found out that this[1] patch caused it. Any idea why did it happen? Or what possibly we can do? [1] https://gerrit.ovirt.org/c/107847/ Regards, Liran.

2 2