December 2023 - Users - oVirt List Archives

Upgrade from oVirt 4.5.4 to oVirt 4.5.5 - nothing provides selinux-policy >= 38.1.27-1.el9
by Devin A. Bougie 02 Feb '24

02 Feb '24

Hi, All. We're having trouble updating our 4.5.4 cluster to 4.5.5. We're running a self-hosted engine on fully updated AlmaLinux 9 hosts, and get the following errors when trying to upgrade to 4.5.5. Any suggestions would be greatly appreciated. Many thanks, Devin ------ [root@lnxvirt01 ~]# dnf clean all 157 files removed [root@lnxvirt01 ~]# dnf update CLASSE Packages - x86_64 36 MB/s | 569 kB 00:00 CentOS-9-stream - Ceph Pacific 839 kB/s | 557 kB 00:00 CentOS-9-stream - Gluster 10 240 kB/s | 56 kB 00:00 CentOS-9 - RabbitMQ 38 354 kB/s | 104 kB 00:00 CentOS Stream 9 - NFV OpenvSwitch 923 kB/s | 154 kB 00:00 CentOS-9 - OpenStack yoga 5.7 MB/s | 3.0 MB 00:00 CentOS Stream 9 - OpsTools - collectd 228 kB/s | 51 kB 00:00 CentOS Stream 9 - oVirt 4.5 6.2 MB/s | 1.0 MB 00:00 oVirt upstream for CentOS Stream 9 - oVirt 4.5 1.0 kB/s | 7.5 kB 00:07 AlmaLinux 9 - AppStream 87 MB/s | 7.7 MB 00:00 AlmaLinux 9 - BaseOS 72 MB/s | 2.4 MB 00:00 AlmaLinux 9 - BaseOS - Debug 9.9 MB/s | 1.9 MB 00:00 AlmaLinux 9 - CRB 67 MB/s | 2.3 MB 00:00 AlmaLinux 9 - Extras 1.5 MB/s | 17 kB 00:00 AlmaLinux 9 - HighAvailability 29 MB/s | 434 kB 00:00 AlmaLinux 9 - NFV 56 MB/s | 1.0 MB 00:00 AlmaLinux 9 - Plus 2.5 MB/s | 22 kB 00:00 AlmaLinux 9 - ResilientStorage 30 MB/s | 446 kB 00:00 AlmaLinux 9 - RT 53 MB/s | 1.0 MB 00:00 AlmaLinux 9 - SAP 874 kB/s | 9.7 kB 00:00 AlmaLinux 9 - SAPHANA 1.3 MB/s | 13 kB 00:00 Error: Problem 1: cannot install the best update candidate for package ovirt-vmconsole-1.0.9-1.el9.noarch - nothing provides selinux-policy >= 38.1.27-1.el9 needed by ovirt-vmconsole-1.0.9-3.el9.noarch from centos-ovirt45 - nothing provides selinux-policy-base >= 38.1.27-1.el9 needed by ovirt-vmconsole-1.0.9-3.el9.noarch from centos-ovirt45 Problem 2: package ovirt-vmconsole-host-1.0.9-3.el9.noarch from centos-ovirt45 requires ovirt-vmconsole = 1.0.9-3.el9, but none of the providers can be installed - cannot install the best update candidate for package ovirt-vmconsole-host-1.0.9-1.el9.noarch - nothing provides selinux-policy >= 38.1.27-1.el9 needed by ovirt-vmconsole-1.0.9-3.el9.noarch from centos-ovirt45 - nothing provides selinux-policy-base >= 38.1.27-1.el9 needed by ovirt-vmconsole-1.0.9-3.el9.noarch from centos-ovirt45 (try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) ------

3 3

Cannot restart ovirt after massive failure.
by Gilboa Davara 18 Jan '24

18 Jan '24

Hello all, During the night, one of my (smaller) setups, a single node self hosted engine (localhost NFS) crashed due to what-looks-like a massive disk failure (Software RAID6, with 10 drives + spare). After a reboot, I let the RAID resync with a fresh drive) and went on to start oVirt. However, no such luck. Two issues: 1. ovirt-ha-broker fails due to broken hosted engine state (log attached). 2. ovirt-ha-agent fails due to network test (tcp) even though both remote-host and DNS servers are active. (log attached). Two questions: 1. Can I somehow force the agent to disable the network liveliness test? 2. Can I somehow force the broker to rebuild / fix the hosted engine state? - Gilboa

4 17

Please, Please Help - New oVirt Install/Deployment Failing - "Host is not up..."
by Matthew J Black 18 Jan '24

18 Jan '24

Hi Everyone, Could someone please help me - I've been trying to do an install of oVirt for *weeks* (including false starts and self-inflicted wounds/errors) and it is still not working. My setup: - oVirt v4.5.3 - A brand new fresh vanilla install of RockyLinux 8.6 - all working AOK - 2*NICs in a bond (802.3ad) with a couple of sub-Interfaces/VLANs - all working AOK - All relevant IPv4 Address in DNS with Reverse Lookups - all working AOK - All relevant IPv4 Address in "/etc/hosts" file - all working AOK - IPv6 (using "method=auto" in the interface config file) enabled on the relevant sub-Interface/VLAN - I'm not using IPv6 on the network, only IPv4, but I'm trying to cover all the bases. - All relevant Ports (as per the oVirt documentation) set up on the firewall - ie firewall-cmd --add-service={{ libvirt-tls | ovirt-imageio | ovirt-vmconsole | vdsm }} - All the relevant Repositories installed (ie RockyLinux BaseOS, AppStream, & PowerTools, and the EPEL, plus the ones from the oVirt documentation) I have followed the oVirt documentation (including the special RHEL-instructions and RockyLinux-instructions) to the letter - no deviations, no special settings, exactly as they are written. All the dnf installs, etc, went off without a hitch, including the "dnf install centos-release-ovirt45", "dnf install ovirt-engine-appliance", and "dnf install ovirt-hosted-engine-setup" - no errors anywhere. Here is the results of a "dnf repolist": - appstream Rocky Linux 8 - AppStream - baseos Rocky Linux 8 - BaseOS - centos-ceph-pacific CentOS-8-stream - Ceph Pacific - centos-gluster10 CentOS-8-stream - Gluster 10 - centos-nfv-openvswitch CentOS-8 - NFV OpenvSwitch - centos-opstools CentOS-OpsTools - collectd - centos-ovirt45 CentOS Stream 8 - oVirt 4.5 - cs8-extras CentOS Stream 8 - Extras - cs8-extras-common CentOS Stream 8 - Extras common packages - epel Extra Packages for Enterprise Linux 8 - x86_64 - epel-modular Extra Packages for Enterprise Linux Modular 8 - x86_64 - ovirt-45-centos-stream-openstack-yoga CentOS Stream 8 - oVirt 4.5 - OpenStack Yoga Repository - ovirt-45-upstream oVirt upstream for CentOS Stream 8 - oVirt 4.5 - powertools Rocky Linux 8 - PowerTools So I kicked-off the oVirt deployment with: "hosted-engine --deploy --4 --ansible-extra-vars=he_offline_deployment=true". I used "--ansible-extra-vars=he_offline_deployment=true" because without that flag I was getting "DNF timout" issues (see my previous post `Local (Deployment) VM Can't Reach "centos-ceph-pacific" Repo`). I answer the defaults to all of questions the script asked, or entered the deployment-relevant answers where appropriate. In doing this I double-checked every answer before hitting <Enter>. Everything progressed smoothly until the deployment reached the "Wait for the host to be up" task... which then hung for more than 30 minutes before failing. From the ovirt-hosted-engine-setup... log file: - 2022-10-20 17:54:26,285+1100 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:113 fatal: [localhost]: FAILED! => {"changed": false, "msg": "Host is not up, please check logs, perhaps also on the engine machine"} I checked the following log files and found all of the relevant ERROR lines, then checked several 10s of proceeding and succeeding lines trying to determine what was going wrong, but I could not determine anything. - ovirt-hosted-engine-setup... - ovirt-hosted-engine-setup-ansible-bootstrap_local_vm... - ovirt-hosted-engine-setup-ansible-final_clean... - not really relevant, I believe I can include the log files (or the relevant parts of the log files) if people want - but that are very large: several 100 kilobytes each. I also googled "oVirt Host is not up" and found several entries, but after reading them all the most relevant seems to be a thread from these mailing list: `Install of RHV 4.4 failing - "Host is not up, please check logs, perhaps also on the engine machine"` - but this seems to be talking about an upgrade and I didn't gleam anything useful from it - I could, of course, be wrong about that. So my questions are: - Where else should I be looking (ie other log files, etc, and possible where to find them)? - Does anyone have any idea why this isn't working? - Does anyone have a work-around (including a completely manual process to get things working - I don't mind working in the CLI with virsh, etc)? - What am I doing wrong? Please, I'm really stumped with this, and I really do need help. Cheers Dulux-Oz

8 22

Configure OVN for oVirt failing - vdsm.tool.ovn_config.NetworkNotFoundError: hostname
by huw.m＠twinstream.com 13 Jan '24

13 Jan '24

Hello, When installing the self-hosted engine using rocky 9 as a host (using nightly builds), the install gets as far as running the below ansible task from ovirt-engine - name: Configure OVN for oVirt ansible.builtin.command: > vdsm-tool ovn-config {{ ovn_central }} {{ ovn_tunneling_interface }} {{ ovn_host_fqdn }} This command gets executed as vdsm-tool ovn-config 192.168.57.4 hostname.my.project.com and fails with error "stderr" : "Traceback (most recent call last):\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 117, in get_network\n return networks[net_name]\nKeyError: 'virt-1.local.hyp.twinstream.com'\n\nDuring handling of the above exception, another exception occurred:\n\nTraceback (most recent call last):\n File \"/usr/bin/vdsm-tool\", line 195, in main\n return tool_command[cmd][\"command\"](*args)\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 63, in ovn_config\n ip_address = get_ip_addr(get_network(network_caps(), net_name))\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 119, in get_network\n raise NetworkNotFoundError(net_name)\nvdsm.tool.ovn_config.NetworkNotFoundError: hostname.my.project.com" Running `vdsm-tool list-nets` on the host gives an empty list. `ip a` gives 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:6d:16:65 brd ff:ff:ff:ff:ff:ff altname enp0s6 altname ens6 inet 192.168.121.29/24 brd 192.168.121.255 scope global dynamic noprefixroute eth0 valid_lft 2482sec preferred_lft 2482sec inet6 fe80::5054:ff:fe6d:1665/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:6b:f4:7b brd ff:ff:ff:ff:ff:ff altname enp0s7 altname ens7 inet 192.168.56.151/24 brd 192.168.56.255 scope global noprefixroute eth1 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe6b:f47b/64 scope link valid_lft forever preferred_lft forever 4: eth2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bond0 state UP group default qlen 1000 link/ether 52:54:00:8f:40:45 brd ff:ff:ff:ff:ff:ff altname enp0s8 altname ens8 5: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:2f:27:9d brd ff:ff:ff:ff:ff:ff altname enp0s9 altname ens9 6: eth4: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bondstorage state UP group default qlen 1000 link/ether 52:54:00:b8:9b:d7 brd ff:ff:ff:ff:ff:ff altname enp0s10 altname ens10 7: eth5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:c2:9a:bd brd ff:ff:ff:ff:ff:ff altname enp0s11 altname ens11 8: eth6: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bondvm state UP group default qlen 1000 link/ether 52:54:00:ed:f7:cc brd ff:ff:ff:ff:ff:ff altname enp0s12 altname ens12 9: eth7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:de:8a:48 brd ff:ff:ff:ff:ff:ff altname enp0s13 altname ens13 10: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:8f:40:45 brd ff:ff:ff:ff:ff:ff inet 192.168.57.4/24 brd 192.168.57.255 scope global noprefixroute bond0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe8f:4045/64 scope link valid_lft forever preferred_lft forever 11: bondvm: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:ed:f7:cc brd ff:ff:ff:ff:ff:ff inet6 fe80::5054:ff:feed:f7cc/64 scope link valid_lft forever preferred_lft forever 12: bondstorage: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:b8:9b:d7 brd ff:ff:ff:ff:ff:ff inet 192.168.59.4/24 brd 192.168.59.255 scope global noprefixroute bondstorage valid_lft forever preferred_lft forever inet6 fe80::5054:ff:feb8:9bd7/64 scope link valid_lft forever preferred_lft forever 13: bondvm.20@bondvm: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:ed:f7:cc brd ff:ff:ff:ff:ff:ff inet6 fe80::5054:ff:feed:f7cc/64 scope link valid_lft forever preferred_lft forever 15: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:b2:5f:e2 brd ff:ff:ff:ff:ff:ff inet 192.168.222.1/24 brd 192.168.222.255 scope global virbr0 valid_lft forever preferred_lft forever 16: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master virbr0 state UNKNOWN group default qlen 1000 link/ether fe:16:3e:34:3d:ea brd ff:ff:ff:ff:ff:ff inet6 fe80::fc16:3eff:fe34:3dea/64 scope link valid_lft forever preferred_lft forever 47: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 6e:27:5f:fa:e3:3a brd ff:ff:ff:ff:ff:ff 48: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 12:7c:d9:2e:cf:26 brd ff:ff:ff:ff:ff:ff 49: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether a2:35:6e:5e:4c:60 brd ff:ff:ff:ff:ff:ff bond0 was selected as the ovirtmgmt bridge NIC. It currently only has one member interface eth2 using balance-xor. In the ovirt management console I can the see host in a down state and given the rest of the playbook ran which requires ssh connectivity between hosted-engine and host, I believe the network is generally setup correctly. No other immediate errors I can. As vdsm-tool ovn-config expects a network to exist with value of the hostname, what is meant to be creating this on the host? Thanks, Huw

2 3

how to renew expired ovirt node vdsm cert manually ?
by dhanaraj.ramesh＠yahoo.com 11 Jan '24

11 Jan '24

below are the steps to renew the expired vdsm cert of ovirt node # To check CERT expired # openssl x509 -in /etc/pki/vdsm/certs/vdsmcert.pem -noout -dates 1. Backup vdsm folder # cd /etc/pki # mv vdsm vdsm.orig # mkdir vdsm ; chown vdsm:kvm vdsm # cd vdsm # mkdir libvirt-vnc certs keys libvirt-spice libvirt-migrate # chown vdsm:kvm libvirt-vnc certs keys libvirt-spice libvirt-migrate 2. Regenerate cert & keys # vdsm-tool configure --module certificates 3. Copy the cert to destination location chmod 440 /etc/pki/vdsm/keys/vdsmkey.pem chown root /etc/pki/vdsmcerts/*pem chmod 644 /etc/pki/vdsmcerts/*pem cp /etc/pki/vdsm/certs/cacert.pem /etc/pki/vdsm/libvirt-spice/ca-cert.pem cp /etc/pki/vdsm/keys/vdsmkey.pem /etc/pki/vdsm/libvirt-spice/server-key.pem cp /etc/pki/vdsm/certs/vdsmcert.pem /etc/pki/vdsm/libvirt-spice/server-cert.pem cp /etc/pki/vdsm/certs/cacert.pem /etc/pki/vdsm/libvirt-vnc/ca-cert.pem cp /etc/pki/vdsm/keys/vdsmkey.pem /etc/pki/vdsm/libvirt-vnc/server-key.pem cp /etc/pki/vdsm/certs/vdsmcert.pem /etc/pki/vdsm/libvirt-vnc/server-cert.pem cp -p /etc/pki/vdsm/certs/cacert.pem /etc/pki/vdsm/libvirt-migrate/ca-cert.pem cp -p /etc/pki/vdsm/keys/vdsmkey.pem /etc/pki/vdsm/libvirt-migrate/server-key.pem cp -p /etc/pki/vdsm/certs/vdsmcert.pem /etc/pki/vdsm/libvirt-migrate/server-cert.pem chown root:qemu /etc/pki/vdsm/libvirt-migrate/server-key.pem cp -p /etc/pki/vdsm.orig/keys/libvirt_password /etc/pki/vdsm/keys/ mv /etc/pki/libvirt/clientcert.pem /etc/pki/libvirt/clientcert.pem.orig mv /etc/pki/libvirt/private/clientkey.pem /etc/pki/libvirt/private/clientkey.pem.orig mv /etc/pki/CA/cacert.pem /etc/pki/CA/cacert.pem.orig cp -p /etc/pki/vdsm/certs/vdsmcert.pem /etc/pki/libvirt/clientcert.pem cp -p /etc/pki/vdsm/keys/vdsmkey.pem /etc/pki/libvirt/private/clientkey.pem cp -p /etc/pki/vdsm/certs/cacert.pem /etc/pki/CA/cacert.pem 3. cross check the backup folder /etc/pki/vdsm.orig vs /etc/pki/vdsm # refer to /etc/pki/vdsm.orig/*/ and set the correct owner & group permission in /etc/pki/vdsm/*/ 4. restart services # Make sure both services are up systemctl restart vdsmd libvirtd

5 4

Cannot get Ovirt 4.5 to work, how ever I try. Virgin install: no pki ca-cert gen, restoring: no OVN connection
by julian.steiner＠conesphere.com 04 Jan '24

04 Jan '24

1 3

On-Premise to MS Azure Cloud Migration
by techieim 29 Dec '23

29 Dec '23

Hello All User At Ovrit, We are using a Ovrit 4.5 Stable version set of 3 physical server as cluster in to 3 setup. As we have migrated from Ovirt 4.2 to 4.5 version, our hardware are already got out warranty and our management don’t to refresh the hardware. Where they have ask us to migrated running VM’s on our infra to “MS Azure Cloud Migration” As Microsoft say in they KB (https://learn.microsoft.com/en-us/azure/site-recovery/migrate-tutorial-on-p… methods where Ovirt/RHV is not listed. We have try one test vm from out Ovirt infra to MS Azure Cloud Migration. Which get show migrated but after that server don’t boot up we have mostly mix of Linux(CentOS/Ubuntu)/Windows. Is any one has migrated Ovirt host vm’s to MS Azure Cloud Migration Regards Techieim.

1 0

DR plan
by 2707974＠gmail.com 28 Dec '23

28 Dec '23

Hi All, We wish to create some kind of DR plan for our OVM 4.4.10.7-1.0.22.el8 environment. Idea is to do storage replication of defined Storage Domains. steps: create LUN on storage present LUN to OVM create Storage Domain put VMs on Storage Domain on storage replicate LUN to another storage [or the same storage] Storage Domains contains OVF_STORE Now, recovery On live OVM present replica of LUN import Storage Domain But we cannot import replica LUN. Where to look for errors? Is this action possible it all? Facts OVM is the same version Storage is the same vendor LUN is browsable on SAN level and have differen WWIN, if we wish to add replicated LUN like new Storage Domain. Adding new Storage Domain mean that LUN will be formatted ... What I do wrong?

2 3

DRoVirt
by 2707974＠gmail.com 28 Dec '23

28 Dec '23

I need/wish to do replication of VMs from one sie to another Does anyone have experience with this? Is there any other solution like DRoVirt https://github.com/Storware/drovirt

1 0

Re: How to restore VMs from shared storage domain when HE and VMs are not accessible?
by Jorge Visentini 27 Dec '23

27 Dec '23

I'm not sure, but... maybe: 1 - Import the Shared Domain Storage 2 - Export the data (VMs/Disks) to a mount point 3 - Create a Local Storage (the Cluster will changed) 4 - Import the data (VMs/Disks) to a Local Storage. Cheers! Em qua., 27 de dez. de 2023 às 14:51, Gorrepati, Varsha < Varsha.Gorrepati(a)hughes.com> escreveu: > Can we import domain storage when we created it locally? > > This option did not work for ovirt 4.4.10.7-1.el8 version. > > > > > > Thanks and Regards, > > Varsha Gorrepati > > > > > > > > *From:* Jorge Visentini <jorgevisentini(a)gmail.com> > *Sent:* Wednesday, December 27, 2023 10:13 AM > *To:* Gorrepati, Varsha <Varsha.Gorrepati(a)hughes.com> > *Cc:* users(a)ovirt.org > *Subject:* Re: [ovirt-users] How to restore VMs from shared storage > domain when HE and VMs are not accessible? > > > > Hi, First of all, recreate the engine VM using your backup or starting > from scratch. Then, just import the domain storages and your VMs will be > there. Cheers! Em qua. , 27 de dez. de 2023 às 06: 29, Gorrepati, Varsha > via Users <users@ ovirt. org> > > ZjQcmQRYFpfptBannerStart > > *This Message Is From an Untrusted Sender * > > You have not previously corresponded with this sender. > > ZjQcmQRYFpfptBannerEnd > > Hi, > > > > First of all, recreate the engine VM using your backup or starting from > scratch. > Then, just import the domain storages and your VMs will be there. > > > > Cheers! > > > > Em qua., 27 de dez. de 2023 às 06:29, Gorrepati, Varsha via Users < > users(a)ovirt.org> escreveu: > > How to restore VMs from shared storage domain when HE and VMs are not > accessible? > > > > > > Thanks and Regards, > > Varsha Gorrepati > > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > <https://urldefense.com/v3/__https:/www.ovirt.org/privacy-policy.html__;!!Em…> > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > <https://urldefense.com/v3/__https:/www.ovirt.org/community/about/community-…> > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/C27HOFRCFDACX… > <https://urldefense.com/v3/__https:/lists.ovirt.org/archives/list/users@ovir…> > > > > > -- > > Att, > > Jorge Visentini > +55 55 98432-9868 > -- Att, Jorge Visentini +55 55 98432-9868

1 0