- Announce - oVirt List Archives

oVirt 4.1.9 will be the last 4.1 release
by Sandro Bonazzola 13 Nov '17

13 Nov '17

Hi, we are now targeting oVirt 4.2.0 GA around December 12th and oVirt 4.1.8 around December 5th. Against tradition that would have set 4.1.8 as last 4.1 release, this round we'll release also oVIrt 4.1.9 being it already in development just before 4.2.0 GA. We suggest to be prepared to upgrade to 4.2 since 4.1 won't receive any further update after 4.1.9 release. -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted> <http://www.teraplan.it/redhat-osd-2017/>

1 0

Fixed ovirt-node-ng packages
by Lev Veyde 09 Nov '17

09 Nov '17

Unfortunately shortly after the oVirt 4.1.7 release we discovered a critical issue with ovirt-node-ng. The issue was promptly handled, and fixed packages were pushed into the repo. Also the ovirt-node-ng-installer ISO was rebuilt. Please make sure to update your repo and use the fixed ovirt-node-ng-installer ISO: http://plain.resources.ovirt.org/pub/ovirt-4.1/iso/ovirt-node-ng-installer-… -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

[ANN] oVirt 4.1.7 Release is now available
by Lev Veyde 07 Nov '17

07 Nov '17

The oVirt Project is pleased to announce the availability of oVirt 4.1.7 release, as of November 7th, 2017 This update is the seventh in a series of stabilization updates to the 4.1 series. 4.1.7 brings 16 enhancements and 99 bugfixes, including 72 high or urgent severity fixes, on top of the previous oVirt 4.1 release. Starting from 4.1.5 oVirt supports libgfapi [5]. Using libgfapi provides a real performance boost for ovirt when using GlusterFS . Due to a known issue [6], using this will break live storage migration. This is expected to be fixed soon. If you do not use live storage migration you can give it a try. Use [7] for more details on how to enable it. This release is available now for: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later * oVirt Node 4.1 See the release notes draft [3] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Live is already available[4] - oVirt Node is already available[4] Additional Resources: * Read more about the oVirt 4.1.7 release highlights: http://www.ovirt.org/release/4.1. <http://www.ovirt.org/release/4.1.7/>7 <http://www.ovirt.org/release/4.1.7/>/ <http://www.ovirt.org/release/4.1.7/> * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] https://www.ovirt.org/community/ [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt [3] http://www.ovirt.org/release/4.1. <http://www.ovirt.org/release/4.1.7/>7 <http://www.ovirt.org/release/4.1.7/>/ <http://www.ovirt.org/release/4.1.7/> [4] http://resources.ovirt.org/pub/ovirt-4.1/iso/ [5] http://staged-gluster-docs.readthedocs.io/en/release3.7.0beta1/Features/lib… [6] https://bugzilla.redhat.com/show_bug.cgi?id=1306562 [7] http://www.ovirt.org/develop/release-management/features/storage/glusterfs-… -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

[ANN] oVirt 4.1.7 Sixth Release Candidate is now available
by Lev Veyde 05 Nov '17

05 Nov '17

The oVirt Project is pleased to announce the availability of the Sixth Release Candidate of oVirt 4.1.7, as of November 5th, 2017 This update is the seventh in a series of stabilization updates to the 4.1 series. Starting from 4.1.5 oVirt supports libgfapi [5]. Using libgfapi provides a real performance boost for ovirt when using GlusterFS . Due to a known issue [6], using this will break live storage migration. This is expected to be fixed soon. If you do not use live storage migration you can give it a try. Use [7] for more details on how to enable it. This release is available now for: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later * oVirt Node 4.1 See the release notes draft [3] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Live is already available[4] - oVirt Node is already available[4] Additional Resources: * Read more about the oVirt 4.1.7 release highlights: http://www.ovirt.org/release/4.1. <http://www.ovirt.org/release/4.1.7/>7 <http://www.ovirt.org/release/4.1.7/>/ <http://www.ovirt.org/release/4.1.7/> * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] https://www.ovirt.org/community/ [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt [3] http://www.ovirt.org/release/4.1. <http://www.ovirt.org/release/4.1.7/>7 <http://www.ovirt.org/release/4.1.7/>/ <http://www.ovirt.org/release/4.1.7/> [4] http://resources.ovirt.org/pub/ovirt-4.1-pre/iso/ [5] http://staged-gluster-docs.readthedocs.io/en/release3.7.0beta1/Features/lib… [6] https://bugzilla.redhat.com/show_bug.cgi?id=1306562 [7] http://www.ovirt.org/develop/release-management/features/storage/glusterfs-… -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

[ANN] oVirt 4.1.7 Fifth Release Candidate is now available
by Lev Veyde 01 Nov '17

01 Nov '17

The oVirt Project is pleased to announce the availability of the Fifth Release Candidate of oVirt 4.1.7, as of November 1st, 2017 This update is the seventh in a series of stabilization updates to the 4.1 series. Starting from 4.1.5 oVirt supports libgfapi [5]. Using libgfapi provides a real performance boost for ovirt when using GlusterFS . Due to a known issue [6], using this will break live storage migration. This is expected to be fixed soon. If you do not use live storage migration you can give it a try. Use [7] for more details on how to enable it. This release is available now for: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later * oVirt Node 4.1 See the release notes draft [3] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Live is already available[4] - oVirt Node is already available[4] Additional Resources: * Read more about the oVirt 4.1.7 release highlights: http://www.ovirt.org/release/4.1. <http://www.ovirt.org/release/4.1.7/>7 <http://www.ovirt.org/release/4.1.7/>/ <http://www.ovirt.org/release/4.1.7/> * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] https://www.ovirt.org/community/ [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt [3] http://www.ovirt.org/release/4.1. <http://www.ovirt.org/release/4.1.7/>7 <http://www.ovirt.org/release/4.1.7/>/ <http://www.ovirt.org/release/4.1.7/> [4] http://resources.ovirt.org/pub/ovirt-4.1-pre/iso/ [5] http://staged-gluster-docs.readthedocs.io/en/release3.7.0beta1/Features/lib… [6] https://bugzilla.redhat.com/show_bug.cgi?id=1306562 [7] http://www.ovirt.org/develop/release-management/features/storage/glusterfs-… -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

[ANN] oVirt 4.2.0 First Beta Release is now available for testing
by Sandro Bonazzola 31 Oct '17

31 Oct '17

The oVirt Project is pleased to announce the availability of the First Beta Release of oVirt 4.2.0, as of October 31st, 2017 This is pre-release software. This pre-release should not to be used in production. Please take a look at our community page[1] to learn how to ask questions and interact with developers and users. All issues or bugs should be reported via oVirt Bugzilla[2]. This update is the first beta release of the 4.2.0 version. This release brings more than 230 enhancements and more than one thousand bug fixes, including more than 380 high or urgent severity fixes, on top of oVirt 4.1 series. What's new in oVirt 4.2.0? - The Administration Portal has been completely redesigned using Patternfly, a widely adopted standard in web application design. It now features a cleaner, more intuitive design, for an improved user experience. - There is an all-new VM Portal for non-admin users. - A new High Performance virtual machine type has been added to the New VM dialog box in the Administration Portal. - Open Virtual Network (OVN) adds support for Open vSwitch software defined networking (SDN). - oVirt now supports Nvidia vGPU. - The ovirt-ansible-roles package helps users with common administration tasks. - Virt-v2v now supports Debian/Ubuntu based VMs. For more information about these and other features, check out the oVirt 4.2.0 blog post <https://ovirt.org/blog/2017/09/introducing-ovirt-4.2.0/>. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later * oVirt Node 4.2 (available for x86_64 only) See the release notes draft [3] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available. - An async release of oVirt Node will follow soon. Additional Resources: * Read more about the oVirt 4.2.0 release highlights: http://www.ovirt.org/release/4.2.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] https://www.ovirt.org/community/ [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt [3] http://www.ovirt.org/release/4.2.0/ [4] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/ -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted> <http://www.teraplan.it/redhat-osd-2017/>

1 0

[ANN] oVirt 4.1.7 Fourth Release Candidate is now available
by Lev Veyde 19 Oct '17

19 Oct '17

The oVirt Project is pleased to announce the availability of the Fourth Release Candidate of oVirt 4.1.7, as of October 18th, 2017 This update is the seventh in a series of stabilization updates to the 4.1 series. Starting from 4.1.5 oVirt supports libgfapi [5]. Using libgfapi provides a real performance boost for ovirt when using GlusterFS . Due to a known issue [6], using this will break live storage migration. This is expected to be fixed soon. If you do not use live storage migration you can give it a try. Use [7] for more details on how to enable it. This release is available now for: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later * oVirt Node 4.1 See the release notes draft [3] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Live is already available[4] - oVirt Node is already available[4] Additional Resources: * Read more about the oVirt 4.1.7 release highlights: http://www.ovirt.org/release/4.1. <http://www.ovirt.org/release/4.1.7/>7 <http://www.ovirt.org/release/4.1.7/>/ <http://www.ovirt.org/release/4.1.7/> * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] https://www.ovirt.org/community/ [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt [3] http://www.ovirt.org/release/4.1. <http://www.ovirt.org/release/4.1.7/>7 <http://www.ovirt.org/release/4.1.7/>/ <http://www.ovirt.org/release/4.1.7/> [4] http://resources.ovirt.org/pub/ovirt-4.1-pre/iso/ [5] http://staged-gluster-docs.readthedocs.io/en/release3.7.0beta1/Features/lib… [6] https://bugzilla.redhat.com/show_bug.cgi?id=1306562 [7] http://www.ovirt.org/develop/release-management/features/storage/glusterfs-… Thanks in advance, -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

[ANN] oVirt 4.1.7 Third Release Candidate is now available
by Sandro Bonazzola 11 Oct '17

11 Oct '17

The oVirt Project is pleased to announce the availability of the Third Release Candidate of oVirt 4.1.7, as of October 11th, 2017 This update is the seventh in a series of stabilization updates to the 4.1 series. Starting from 4.1.5 oVirt supports libgfapi [5]. Using libgfapi provides a real performance boost for ovirt when using GlusterFS . Due to a known issue [6], using this will break live storage migration. This is expected to be fixed soon. If you do not use live storage migration you can give it a try. Use [7] for more details on how to enable it. This release is available now for: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later * oVirt Node 4.1 See the release notes draft [3] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Live is already available[4] - oVirt Node is already available[4] Additional Resources: * Read more about the oVirt 4.1.7 release highlights: http://www.ovirt.org/release/4.1.7/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] https://www.ovirt.org/community/ [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt [3] http://www.ovirt.org/release/4.1.7/ [4] http://resources.ovirt.org/pub/ovirt-4.1-pre/iso/ [5] http://staged-gluster-docs.readthedocs.io/en/release3.7.0beta1/Features/lib… [6] https://bugzilla.redhat.com/show_bug.cgi?id=1306562 [7] http://www.ovirt.org/develop/release-management/features/storage/glusterfs-… -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted> <http://www.teraplan.it/redhat-osd-2017/>

1 0

[ANN] oVirt 4.2.0 First Alpha Release is now available for testing
by Sandro Bonazzola 28 Sep '17

28 Sep '17

The oVirt Project is pleased to announce the availability of the First Alpha Release of oVirt 4.2.0, as of September 28th, 2017 This is pre-release software. This pre-release should not to be used in production. Please take a look at our community page[1] to learn how to ask questions and interact with developers and users. All issues or bugs should be reported via oVirt Bugzilla[2]. This update is the first alpha release of the 4.2.0 version. This release brings more than 120 enhancements and more than 670 bug fixes, including more than 260 high or urgent severity fixes, on top of oVirt 4.1 series. What's new in oVirt 4.2.0? - The Administration Portal has been completely redesigned using Patternfly, a widely adopted standard in web application design. It now features a cleaner, more intuitive design, for an improved user experience. - There is an all-new VM Portal for non-admin users. - A new High Performance virtual machine type has been added to the New VM dialog box in the Administration Portal. - Open Virtual Network (OVN) adds support for Open vSwitch software defined networking (SDN). - oVirt now supports Nvidia vGPU. - The ovirt-ansible-roles package helps users with common administration tasks. - Virt-v2v now supports Debian/Ubuntu based VMs. For more information about these and other features, check out the oVirt 4.2.0 blog post <https://ovirt.org/blog/2017/09/introducing-ovirt-4.2.0/>. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later * oVirt Node 4.2 (available for x86_64 only) See the release notes draft [3] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available. - An async release of oVirt Node will follow soon. Additional Resources: * Read more about the oVirt 4.2.0 release highlights: http://www.ovirt.org/release/4.2.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] https://www.ovirt.org/community/ [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt [3] http://www.ovirt.org/release/4.2.0/ [4] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/ -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted> <http://www.teraplan.it/redhat-osd-2017/>

2 1

[ANN] oVirt 4.1.7 Second Release Candidate is now available
by Lev Veyde 28 Sep '17

28 Sep '17

The oVirt Project is pleased to announce the availability of the Second Release Candidate of oVirt 4.1.7, as of September 28th, 2017 This update is the seventh in a series of stabilization updates to the 4.1 series. Starting from 4.1.5 oVirt supports libgfapi [5]. Using libgfapi provides a real performance boost for ovirt when using GlusterFS . Due to a known issue [6], using this will break live storage migration. This is expected to be fixed soon. If you do not use live storage migration you can give it a try. Use [7] for more details on how to enable it. This release is available now for: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.4 or later * CentOS Linux (or similar) 7.4 or later * oVirt Node 4.1 See the release notes draft [3] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Live is already available[4] - oVirt Node is already available[4] Additional Resources: * Read more about the oVirt 4.1.7 release highlights: http://www.ovirt.org/release/4.1. <http://www.ovirt.org/release/4.1.7/>7 <http://www.ovirt.org/release/4.1.7/>/ <http://www.ovirt.org/release/4.1.7/> * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] https://www.ovirt.org/community/ [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt [3] http://www.ovirt.org/release/4.1. <http://www.ovirt.org/release/4.1.7/>7 <http://www.ovirt.org/release/4.1.7/>/ <http://www.ovirt.org/release/4.1.7/> [4] http://resources.ovirt.org/pub/ovirt-4.1-pre/iso/ [5] http://staged-gluster-docs.readthedocs.io/en/release3.7.0beta1/Features/lib… [6] https://bugzilla.redhat.com/show_bug.cgi?id=1306562 [7] http://www.ovirt.org/develop/release-management/features/storage/glusterfs-… Thanks in advance, -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0