April 2024 - Users - oVirt List Archives

Error when deploy Ovirt4.4 Hosted Engine
by staybox＠gmail.com 17 Feb '25

17 Feb '25

Hello, I get error, need help. [ ERROR ] fatal: [localhost]: FAILED! => {"msg": "The conditional check 'not ipv6_deployment|bool and route_rules_ipv4.stdout | from_json | selectattr('priority', 'equalto', 100) | selectattr('dst', 'equalto', virbr_cidr_ipv4 | ipaddr('address') ) | list | length == 0' failed. The error was: error while evaluating conditional (not ipv6_deployment|bool and route_rules_ipv4.stdout | from_json | selectattr('priority', 'equalto', 100) | selectattr('dst', 'equalto', virbr_cidr_ipv4 | ipaddr('address') ) | list | length == 0): 'dict object' has no attribute 'dst'\n\nThe error appears to be in '/usr/share/ansible/collections/ansible_collections/ovirt/ovirt/roles/hosted_engine_setup/tasks/bootstrap_local_vm/01_prepare_routing_rules.yml': line 81, column 5, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n changed_when: true\n - name: Add IPv4 inbound route rules\n ^ here\n"}

4 4

How to list all snapshots?
by jorgevisentini＠gmail.com 14 Feb '25

14 Feb '25

Hello everyone! First, I would like to thank everyone involved in this wonderful project. I leave here my sincere thanks! Does anyone know if it is possible to list all snapshots automatically? It can be by ansible, python, shell... any way that helps to list them all without having to enter Domain by Domain. Thank you all!

4 3

snapshot solution: Existing snapshots that were taken after this one will be erased.
by dhanaraj.ramesh＠yahoo.com 29 Jan '25

29 Jan '25

Hi Team, when I want to commit the older snapshots I'm getting warning stating " Existing snapshots that were taken after this one will be erased.". is there any way we can retain the latest snapshots as is in the chain? I knew cloning and template export options are there to secure that latest snapshot data but these are will consume additional space in storage and take time.

4 3

Restart oVirt-Engine
by Jeremey Wise 09 Jan '25

09 Jan '25

How ,without reboot of hosting system, do I restart the oVirt engine? # I tried below but do not seem to effect the virtual machine [root@thor iso]# systemctl restart ov ovirt-ha-agent.service ovirt-imageio.service ovn-controller.service ovs-delete-transient-ports.service ovirt-ha-broker.service ovirt-vmconsole-host-sshd.service ovsdb-server.service ovs-vswitchd.service [root@thor iso]# # You cannot restart the VM " HostedEngine " as it responses: Error while executing action: HostedEngine: - Cannot restart VM. This VM is not managed by the engine. Reason is I had to do some work on a node. Reboot it.. it is back up.. network is all fine.. Cockpit working fine... and gluster fine.. But oVirt-Engine refuses to accept the node is up. -- p <jeremey.wise(a)gmail.com>enguinpages

4 4

Host deploy failure: Configure OVN for oVirt
by stephan.badenhorst＠fnb.co.za 05 Jan '25

05 Jan '25

Good day, I am running into a problem during host deploy via the oVirt engine GUI since upgrading to ovirt-engine-4.5.5-1.el8. The "Configure OVN for oVirt" task seem to fail when trying to run the vdsm-tool ovn-config command. Host deploy used to work fine when the engine was on version 4.5.4. Anyone that can guide me on the right path to get past this issue? Does not seem to be a new problem - https://lists.ovirt.org/archives/list/users@ovirt.org/thread/IDLGSBQFX35EHH… Log extract: 2024-02-01 14:48:19 SAST - TASK [ovirt-provider-ovn-driver : Configure OVN for oVirt] ********************* . . . "stdout" : "fatal: [mob-r1-l-ovirt-aa-1-23.x.fnb.co.za]: FAILED! => {\"changed\": true, \"cmd\": [\"vdsm-tool\", \"ovn-config\", \"192.168.2.100\", \"host23.mydomain.com\"], \"delta\": \"0:00:00.538143\", \"end \": \"2024-02-01 14:48:20.596823\", \"msg\": \"non-zero return code\", \"rc\": 1, \"start\": \"2024-02-01 14:48:20.058680\", \"stderr\": \"Traceback (most recent call last):\\n File \\\"/usr/lib/python3.6/site-packages/vdsm/t ool/ovn_config.py\\\", line 117, in get_network\\n return networks[net_name]\\nKeyError: 'host23.mydomain.com'\\n\\nDuring handling of the above exception, another exception occurred:\\n\\nTraceback (most rec ent call last):\\n File \\\"/usr/bin/vdsm-tool\\\", line 195, in main\\n return tool_command[cmd][\\\"command\\\"](*args)\\n File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 63, in ovn_config\\n ip_address = get_ip_addr(get_network(network_caps(), net_name))\\n File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 119, in get_network\\n raise NetworkNotFoundError(net_name)\\nvdsm.tool.ovn _config.NetworkNotFoundError: host23.mydomain.com\", \"stderr_lines\": [\"Traceback (most recent call last):\", \" File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 117, in get_network \", \" return networks[net_name]\", \"KeyError: 'host23.mydomain.com'\", \"\", \"During handling of the above exception, another exception occurred:\", \"\", \"Traceback (most recent call last):\", \" File \ \\"/usr/bin/vdsm-tool\\\", line 195, in main\", \" return tool_command[cmd][\\\"command\\\"](*args)\", \" File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 63, in ovn_config\", \" ip_address = get_ip_addr(get_network(network_caps(), net_name))\", \" File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 119, in get_network\", \" raise NetworkNotFoundError(net_name)\", \"vdsm.tool.ovn_config. NetworkNotFoundError: host23.mydomain.com\"], \"stdout\": \"\", \"stdout_lines\": []}", Thanks in advance!! Stephan

5 5

Unable to access ovirt Admin Screen from ovirt Host
by louisb＠ameritech.net 07 Dec '24

07 Dec '24

I've reinstalled ovirt 4.4 on my server remotely via cockpit terminal. I'm able to access the ovirt admin screen remotely from the laptop that I used for the install. However, using the same URL I'm unable to gain access to the admin screen. Following the instruction in the documentation I've modified the file: /etc/ovirt-engine/engine.conf.d/99-custom-sso-setup.conf, to reflect the DNS name and I enter in the IP address. But I'm still unable to access the screen from the server console. What else needs to change in order to gain access from the server console? Thanks

5 8

SPM and Task error ...
by Enrico 22 Nov '24

22 Nov '24

Hi all, my ovirt cluster has got 3 Hypervisors runnig Centos 7.5.1804 vdsm is 4.20.39.1-1.el7, ovirt engine is 4.2.4.5-1.el7, the storage systems are HP MSA P2000 and 2050 (fibre channel). I need to stop one of the hypervisors for maintenance but this system is the storage pool manager. For this reason I decided to manually activate SPM in one of the other nodes but this operation is not successful. In the ovirt engine (engine.log) the error is this: 2019-07-25 12:39:16,744+02 INFO [org.ovirt.engine.core.bll.storage.pool.ForceSelectSPMCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] Running command: ForceSelectSPMCommand internal: false. Entities affected : ID: 81c9bd3c-ae0a-467f-bf7f-63ab30cd8d9e Type: VDSAction group MANIPULATE_HOST with role type ADMIN 2019-07-25 12:39:16,745+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, SpmStopOnIrsVDSCommand( SpmStopOnIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false'}), log id: 37bf4639 2019-07-25 12:39:16,747+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, ResetIrsVDSCommand( ResetIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', vdsId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', ignoreStopFailed='false'}), log id: 2522686f 2019-07-25 12:39:16,749+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, SpmStopVDSCommand(HostName = infn-vm05.management, SpmStopVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7'}), log id: 1810fd8b 2019-07-25 12:39:16,758+02 *ERROR* [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] SpmStopVDSCommand::Not stopping SPM on vds 'infn-vm05.management', pool id '18d57688-6ed4-43b8-bd7c-0665b55950b7' as there are uncleared tasks 'Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e', status 'running'' 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, SpmStopVDSCommand, log id: 1810fd8b 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, ResetIrsVDSCommand, log id: 2522686f 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, SpmStopOnIrsVDSCommand, log id: 37bf4639 2019-07-25 12:39:16,760+02 *ERROR* [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] EVENT_ID: USER_FORCE_SELECTED_SPM_STOP_FAILED(4,096), Failed to force select infn-vm07.management as the SPM due to a failure to stop the current SPM. while in the hypervisor (SPM) vdsm.log: 2019-07-25 12:39:16,744+02 INFO [org.ovirt.engine.core.bll.storage.pool.ForceSelectSPMCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] Running command: ForceSelectSPMCommand internal: false. Entities affected : ID: 81c9bd3c-ae0a-467f-bf7f-63ab30cd8d9e Type: VDSAction group MANIPULATE_HOST with role type ADMIN 2019-07-25 12:39:16,745+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, SpmStopOnIrsVDSCommand( SpmStopOnIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false'}), log id: 37bf4639 2019-07-25 12:39:16,747+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, ResetIrsVDSCommand( ResetIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', vdsId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', ignoreStopFailed='false'}), log id: 2522686f 2019-07-25 12:39:16,749+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, SpmStopVDSCommand(HostName = infn-vm05.management, SpmStopVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7'}), log id: 1810fd8b 2019-07-25 12:39:16,758+02 *ERROR* [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] SpmStopVDSCommand::Not stopping SPM on vds 'infn-vm05.management', pool id '18d57688-6ed4-43b8-bd7c-0665b55950b7' as there are uncleared tasks 'Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e', status 'running'' 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, SpmStopVDSCommand, log id: 1810fd8b 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, ResetIrsVDSCommand, log id: 2522686f 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, SpmStopOnIrsVDSCommand, log id: 37bf4639 2019-07-25 12:39:16,760+02 *ERROR* [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] EVENT_ID: USER_FORCE_SELECTED_SPM_STOP_FAILED(4,096), Failed to force select infn-vm07.management as the SPM due to a failure to stop the current SPM. 2019-07-25 12:39:18,660+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period time and should be polled. Pre-polling period is 60000 millis. 2019-07-25 12:39:18,660+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period time and should be polled. Pre-polling period is 60000 millis. 2019-07-25 12:39:18,750+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period time and should be polled. Pre-polling period is 60000 millis. 2019-07-25 12:39:18,750+02 *ERROR* [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] BaseAsyncTask::logEndTaskFailure: Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' (Parent Command 'Unknown', Parameters Type 'org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters') ended with failure: 2019-07-25 12:39:18,750+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: Attempting to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' 2019-07-25 12:39:18,751+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, SPMClearTaskVDSCommand( SPMTaskGuidBaseVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 34ae2b2f 2019-07-25 12:39:18,752+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, HSMClearTaskVDSCommand(HostName = infn-vm05.management, HSMTaskGuidBaseVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: d3a78ad 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, HSMClearTaskVDSCommand, log id: d3a78ad 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, SPMClearTaskVDSCommand, log id: 34ae2b2f 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: At time of attempt to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' the response code was 'TaskStateError' and message was 'Operation is not allowed in this task state: ("can't clean in state running",)'. Task will not be cleaned 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] BaseAsyncTask::onTaskEndSuccess: Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' (Parent Command 'Unknown', Parameters Type 'org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters') ended successfully. 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: Attempting to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' 2019-07-25 12:39:18,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, SPMClearTaskVDSCommand( SPMTaskGuidBaseVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 42de0c2b 2019-07-25 12:39:18,759+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, HSMClearTaskVDSCommand(HostName = infn-vm05.management, HSMTaskGuidBaseVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 4895c79c 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, HSMClearTaskVDSCommand, log id: 4895c79c 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, SPMClearTaskVDSCommand, log id: 42de0c2b 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: At time of attempt to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' the response code was 'TaskStateError' and message was 'Operation is not allowed in this task state: ("can't clean in state running",)'. Task will not be cleaned 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period time and should be polled. Pre-polling period is 60000 millis. 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.bll.tasks.AsyncTaskManager] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Cleaning zombie tasks: Clearing async task 'Unknown' that started at 'Fri May 03 14:48:50 CEST 2019' 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: Attempting to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' 2019-07-25 12:39:18,765+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, SPMClearTaskVDSCommand( SPMTaskGuidBaseVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: da77af2 2019-07-25 12:39:18,766+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, HSMClearTaskVDSCommand(HostName = infn-vm05.management, HSMTaskGuidBaseVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 530694fb 2019-07-25 12:39:18,771+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, HSMClearTaskVDSCommand, log id: 530694fb 2019-07-25 12:39:18,771+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, SPMClearTaskVDSCommand, log id: da77af2 2019-07-25 12:39:18,771+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: At time of attempt to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' the response code was 'TaskStateError' and message was 'Operation is not allowed in this task state: ("can't clean in state running",)'. Task will not be cleaned there is some relation between this error and a task that has remained hanging, from SPM server: # vdsm-client Task getInfo taskID=fdcf4d1b-82fe-49a6-b233-323ebe568f8e { "verb": "prepareMerge", "id": "fdcf4d1b-82fe-49a6-b233-323ebe568f8e" } # vdsm-client Task getStatus taskID=fdcf4d1b-82fe-49a6-b233-323ebe568f8e { "message": "running job 1 of 1", "code": 0, "taskID": "fdcf4d1b-82fe-49a6-b233-323ebe568f8e", "taskResult": "", "taskState": "running" } How can I solve this problem ? Thanks a lot for your help !! Best Regards Enrico -- _______________________________________________________________________ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchetti<at>pg.infn.it _______________________________________________________________________

5 15

Latest 4.5.5 centos node install username password not working.
by antonio.riggio＠mail.com 24 Oct '24

24 Oct '24

I been trying to install 4.5.5 testing and used the node installer iso. I cant login what is the username and password I have tried what others have done in the forums with no luck admin@ovirt . root admin . Also can the engine be installed from the node via the cockpit still? How can I get logged in to do this? I have used 4.3 and didnt have any of these problems. It was really simple to do. Any suggestions? grazie

4 8

Storage Domain Not synchronized, To synchronize them, please move them to maintenance and then activate.
by Arup Jyoti Thakuria 09 Sep '24

09 Sep '24

Dear All, In our Ovirt Engine Infrastructure, recently we have received an alert for one of our "Storage Domain" The alert is as mentioned below---- =================================== Storage domains with IDs [fb34e5b7-e850-4d66-ab47-3011d2000338] could not be synchronized. To synchronize them, please move them to maintenance and then activate. ========================================================== What is the consequence of this alert, if we ignore this what can happen to the infra, are we going to face any issue with the VMs, currently this infra is under production

2 1

oVirt networks
by Enrico Becchetti 28 Aug '24

28 Aug '24

Dear all, Ineed your help to understand how to configure the network of a new oVirt cluster. Mynew system will have a 4.3 engine thatruns in a virtual machine, andsome Dell R7525 AMD EPYC hypervisors, eachholding two 4-port PCI network cards. These servers will have node-ovirt image again in version 4.3. As for the network, there are two HPE Aruba 2540G, non-stackable, with 24 1Gbs ports and 2 10Gbs uplinks to the star center. This is a simplified scheme: My goal is to make the most of the server's 8 ethernet interfaces to have both reliability and maximum possible throughput. This cluster will have two virtual networks, one forovirt management and one for the traffic of individual virtual machines. With that said here's what my idea is. I would like to have two links aggregated by 4Gbs, one for ovrtmgt and the other for vmnet. With the ovirt web interface I can createan active-passive "Mode 1" bond, but this won'tallow me to go beyond 1Gbs. Alternatively I could create a "Mode 4" bond 802.3ad but unfortunately the switches are not stacked and therefore not even this solution applies. This is an example with active passive configuration: Can you tell me if ovirt can generate//nested bonds? Or do you have other solutions ? Thanks a lot ! Best Regards Enrico -- _______________________________________________________________________ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Skype:enrico_becchetti Mail: Enrico.Becchetti<at>pg.infn.it Pagina web personale: https://www.pg.infn.it/home/enrico-becchetti/ ______________________________________________________________________

5 6

boot from cdrom & error code 0005
by edp＠maddalena.it 21 Aug '24

21 Aug '24

Hi. I have created a new storage domain (data domain, storage type nfs) to use it to upload iso images. I have so uploaded a new iso and then attach the iso to a new vm. But when I try to boot the vm I obtain this error: booting from dvd/cd... boot failed: could not read from cdrom (code 0005) no bootable device The iso file has been uploaded with success in the data storage domain and so the vm lets my attach the iso to the vm in the boot settings. Can you help me? Thank you

4 6

VM Migration Failed
by KSNull Zero 10 Jul '24

10 Jul '24

Running oVirt 4.4.5 VM cannot migrate between hosts. vdsm.log contains the following error: libvirt.libvirtError: operation failed: Failed to connect to remote libvirt URI qemu+tls://ovhost01.local/system: authentication failed: Failed to verify peer's certificate Certificates on hosts was renewed some time ago. How this issue can be fixed ? Thank you.

4 6

How to re-enroll (or renew) host certificates for a single-host hosted-engine deployment?
by Derek Atkins 28 Jun '24

28 Jun '24

Hi, I've got a single-host hosted-engine deployment that I originally installed with 4.0 and have upgraded over the years to 4.3.10. I and some of my users have upgraded remote-viewer and now I get an error when I try to view the console of my VMs: (remote-viewer:8252): Spice-WARNING **: 11:30:41.806: ../subprojects/spice-common/common/ssl_verify.c:477:openssl_verify: Error in server certificate verification: CA signature digest algorithm too weak (num=68:depth0:/O=<My Org Name>/CN=<Host's Name>) I am 99.99% sure this is because the old certs use SHA1. I reran engine-setup on the engine and it asked me if I wanted to renew the PKI, and I answered yes. This replaced many[1] of the certificates in /etc/pki/ovirt-engine/certs on the engine, but it did not update the Host's certificate. All the documentation I've seen says that to refresh this certificate I need to put the host into maintenance mode and then re-enroll.. However I cannot do that, because this is a single-host system so I cannot put the host in local mode -- there is no place to migrate the VMs (let alone the Engine VM). So.... Is there a command-line way to re-enroll manually and update the host certs? Or some other way to get all the leftover certs renewed? Thanks, -derek [1] Not only did it not update the Host's cert, it did not update any of the vmconsole-proxy certs, nor the certs in /etc/pki/ovirt-vmconsole/, and obviously nothing in /etc/pki/ on the host itself. -- Derek Atkins 617-623-3745 derek(a)ihtfp.com www.ihtfp.com Computer and Internet Security Consultant

8 16

4.5.4 with Ceph only storage
by Maurice Burrows 25 Jun '24

25 Jun '24

Hey ... A long story short ... I have an existing Red Hat Virt / Gluster hyperconverged solution that I am moving away from. I have an existing Ceph cluster that I primarily use for OpenStack and a small requirement for S3 via RGW. I'm planning to build a new oVirt 4.5.4 cluster on RHEL9 using Ceph for all storage requirements. I've read many online articles on oVirt and Ceph, and they all seem to use the Ceph iSCSI gateway, which is now in maintenance, so I'm not real keen to commit to iSCSI. So my question is, IS there any reason I cannot use CephFS for both hosted-engine and as a data storage domain? I'm currently running Ceph Pacific FWIW. Cheers

5 10

New host cannot connect to master domain
by ovirt＠kirschke.de 21 Jun '24

21 Jun '24

Hi, i just installed a new host, which cannot connect to the master domain. The domain is an iscsi device on a nas, and ovirt is actually fine with it, other hosts have no problem. I'sure , I#m just overlooking something. What I see in the log is: 024-04-16 11:10:06,320-0400 INFO (jsonrpc/3) [storage.storagepoolmemorybackend] new storage pool master version 302 and domains map {'6f018fbd-de93-4c56-880d-8ede2aad2674': 'Active', '2c870e06-6c70-45ec-b665-ce29408c8a8e': 'Active', 'a154 96dc-c241-4658-af9d-0dfe11783916': 'Active', '41012bfb-b802-4092-b699-7f5284d95c8e': 'Active'} (spbackends:417) 2024-04-16 11:10:06,320-0400 INFO (jsonrpc/3) [storage.storagepool] updating pool 5836aaac-0030-0064-024d-0000000002e4 backend from type NoneType instance 0x7f10d667fb70 to type StoragePoolMemoryBackend instance 0x7f10702d7408 (sp:149) 2024-04-16 11:10:06,320-0400 INFO (jsonrpc/3) [storage.storagepool] Connect host #2 to the storage pool 5836aaac-0030-0064-024d-0000000002e4 with master domain: a15496dc-c241-4658-af9d-0dfe11783916 (ver = 302) (sp:699) 2024-04-16 11:10:06,320-0400 INFO (jsonrpc/3) [storage.storagedomaincache] Invalidating storage domain cache (sdc:57) 2024-04-16 11:10:06,320-0400 INFO (jsonrpc/3) [storage.storagedomaincache] Clearing storage domain cache (sdc:182) 2024-04-16 11:10:06,320-0400 INFO (jsonrpc/3) [storage.storagedomaincache] Refreshing storage domain cache (resize=True) (sdc:63) 2024-04-16 11:10:06,320-0400 INFO (jsonrpc/3) [storage.iscsi] Scanning iSCSI devices (iscsi:445) 2024-04-16 11:10:06,456-0400 INFO (jsonrpc/3) [storage.iscsi] Scanning iSCSI devices: 0.14 seconds (utils:373) 2024-04-16 11:10:06,456-0400 INFO (jsonrpc/3) [storage.hba] Scanning FC devices (hba:42) 2024-04-16 11:10:06,481-0400 INFO (jsonrpc/3) [storage.hba] Scanning FC devices: 0.03 seconds (utils:373) 2024-04-16 11:10:06,481-0400 INFO (jsonrpc/3) [storage.multipath] Waiting until multipathd is ready (multipath:95) 2024-04-16 11:10:08,498-0400 INFO (jsonrpc/3) [storage.multipath] Waited 2.02 seconds for multipathd (tries=2, ready=2) (multipath:122) 2024-04-16 11:10:08,498-0400 INFO (jsonrpc/3) [storage.multipath] Resizing multipath devices (multipath:223) 2024-04-16 11:10:08,499-0400 INFO (jsonrpc/3) [storage.multipath] Resizing multipath devices: 0.00 seconds (utils:373) 2024-04-16 11:10:08,499-0400 INFO (jsonrpc/3) [storage.storagedomaincache] Refreshing storage domain cache: 2.18 seconds (utils:373) 2024-04-16 11:10:08,499-0400 INFO (jsonrpc/3) [storage.storagedomaincache] Looking up domain a15496dc-c241-4658-af9d-0dfe11783916 (sdc:154) 2024-04-16 11:10:08,536-0400 INFO (jsonrpc/3) [storage.storagedomaincache] Looking up domain a15496dc-c241-4658-af9d-0dfe11783916: 0.04 seconds (utils:373) 2024-04-16 11:10:08,537-0400 INFO (jsonrpc/3) [vdsm.api] FINISH connectStoragePool error=Cannot find master domain: 'spUUID=5836aaac-0030-0064-024d-0000000002e4, msdUUID=a15496dc-c241-4658-af9d-0dfe11783916' from=::ffff:10.2.0.4,44914, flo w_id=44d9e674, task_id=32f0ea2a-044b-4a81-a12e-a269e59a802b (api:35) 2024-04-16 11:10:08,537-0400 ERROR (jsonrpc/3) [storage.taskmanager.task] (Task='32f0ea2a-044b-4a81-a12e-a269e59a802b') Unexpected error (task:860) Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/vdsm/storage/sp.py", line 1550, in setMasterDomain domain = sdCache.produce(msdUUID) File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 98, in produce domain.getRealDomain() File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 34, in getRealDomain return self._cache._realProduce(self._sdUUID) File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 122, in _realProduce domain = self._findDomain(sdUUID) File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 139, in _findDomain return findMethod(sdUUID) File "/usr/lib/python3.6/site-packages/vdsm/storage/sdc.py", line 169, in _findUnfetchedDomain raise se.StorageDomainDoesNotExist(sdUUID) vdsm.storage.exception.StorageDomainDoesNotExist: Storage domain does not exist: ('a15496dc-c241-4658-af9d-0dfe11783916',) During handling of the above exception, another exception occurred: .... The domain a15496dc-c241-4658-af9d-0dfe11783916 definitely exist, and works on other systems. THe new host can acces the iscsi targets, and i am able to log into them. Any one who knows, which blinder I have to remove, so I see the actual problem? Thanks and best regards Steffen

1 1

i can't access console with noVNC or VNC client(console.vv)
by z84614242＠163.com 14 May '24

14 May '24

i installed the ovirt 4.5 engine on centos stream 9 and add a ovirt node(ovirt node 4.5 iso) to this engine. i am going to run my vm on this node. i follow the instruction to create the data center, the cluster, the storage domain, upload the image. everything is fine. and after i create a vm with ubuntu image attach, i found that i can't visit the console. when i using the noVNC, it says "Something went wrong, connection is closed", when i visit vnc with virt-viewver, is says "Failed to complete handshake Error in the pull function". i try to change the console type to Bochs one and it appear the same. i change to QXL mode and the vm can't start any more. i check the log, it says "unsupported configuration: domain configuration does not support video model 'qxl'". so now i can't visit my vm by anyway. i deploy the engine follow the official instruction and keep mostly option default but why still have this issue. why the noVNC says "Something went wrong" instead of telling me what is actually wrong

2 1

Cannot create bond
by dcaamano＠apexutilities.ca 06 May '24

06 May '24

Hello, I recently deploy two KVM hosts and one KVM engine. things seem to be working good so far; however, I cannot create bonds in my KVM hosts. I have 4 interfaces, two enabled (cable connected) and two disabled (cable unplugged, not needed at the moment). The ovirmgmt network is running on one of the active interfaces. I have done the following: Create LACP bond with both connected interfaces. Create Load-balancing XOR bond with both connected interfaces. Create LACP bond with both unplugged interfaces. Create Load-balancing XOR bond with both unplugged interfaces. Create LACP bond with one connected and one unplugged interface. Create Load-balancing XOR bond with one connected and one interfaces. Remove server from KVM engine, create bond at the host level using cockpit, try to add the host back into KVM cluster. None of the options i have tried successfully create the bond in the KVM cluster. I will appreciate your assistance in getting this to work. Environment details OS on all servers: Oracle Linux 8.9 with kernel 5.15.0-205.149.5.1.el8uek.x86_64 KVM engine: running on a virtual machine in vCenter KVM hosts: physical servers Software version: 4.5.4-1.0.31.el8 Thank you

2 3

ARM64 Host Failed to Add to Cluster
by limajasond＠yahoo.com 06 May '24

06 May '24

Hi, I configured a Rocky Linux 9 ARM64 Raspberry Pi 4B as an oVirt Host. When adding to a new Cluster under an established Datacenter it fails configuring OVN, I did make sure ovirt-provider-ovn and ovirt-provider-ovn-driver was installed. The error I found after digging into the ansible yml file on the Hosted Engine and the Python py related to configuring OVN. Ultimately the error is below: [root@ovirtnode3 ~]# vdsm-tool ovn-config 192.168.1.50 ovirtnode3.test.com Traceback (most recent call last): File "/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py", line 117, in get_network return networks[net_name] KeyError: 'ovirtnode3.test.com' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/bin/vdsm-tool", line 195, in main return tool_command[cmd]["command"](*args) File "/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py", line 63, in ovn_config ip_address = get_ip_addr(get_network(network_caps(), net_name)) File "/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py", line 119, in get_network raise NetworkNotFoundError(net_name) vdsm.tool.ovn_config.NetworkNotFoundError: ovirtnode3.test.com Running vdsm-tool list-nets displays nothing. Something is off in the script, but I admit I am not sure how. I know oVirt says Aarch64 is experimental, but this is unusable if vdsm-tool can't even gather/list the networks or config the OVN.

2 2

Re: Ovirt Hyperconverged Storage
by Thomas Hoberg 29 Apr '24

29 Apr '24

And I might have misread where your problems actually are... Because oVirt was born on SAN but tries to be storage agnostic, it creates its own overlay abstraction, a block layer that is then managed within oVirt even when you use NFS or GlusterFS underneath. "The ISO domain" has actually been deprecated and ISO images can be put into any domain type (e.g. also data). But they still have to be uploaded to that domain via the management engine GUI, you can't just copy the ISO images somewhere within the files and directories oVirt might create and expect them to be visible to the GUI or the VMs.

1 0

Re: Ovirt Hyperconverged Storage
by Thomas Hoberg 29 Apr '24

29 Apr '24

Hi Tim, HA, HCI and failover either require or at least benefit from consistent storage. The original NFS reduce the risk of inconsistency to single files, Gluster puts the onus of consistency mostly the clients and I guess Ceph is similar. iSCSI has been described as a bit the worst of everything in storage and I can appreciate that view in a HA scenario because it doesn't help with consistency. Of course, its block layer abstraction isn't really that different from SAN or NFS 4.x object storage. I last experimented with iSCSI 20 years ago, mostly because it seemed so great for booting even less cooperative diskless hosts than Sun workstations over the network. But if I had a reliable TrueNAS and wanted to run oVirt, I'd just go with NFS. AFAIK oVirt was born on SAN but with SAN outside of oVirt's purvue. So if your iSCSI setup behaves like a SAN, oVirt should be easy to get going, but I've never tried myself. And the lack of tried and tested tutorials or videos from 20 different sources might be the reason oVirt didn't quite push out everybody else.

1 0

Oracle Virtualization Manager 4.5 anyone?
by Thomas Hoberg 29 Apr '24

29 Apr '24

Redhat's decision to shut down RHV caught Oracle pretty unprepared, I'd guess, who had just shut down their own vSphere clone in favor of a RHV clone a couple of years ago. Oracle is even less vocal about their "Oracle Virtualization" strategy, they don't even seem to have a proper naming convention or branding. But they have been pushing out OV releases without a publicly announced EOL almost a year behind Redhat for the last years. And after a 4.4 release in September 22, a few days ago on December 12th actually a release 4.5 was made public. I've operated oVirt 4.3 with significant quality issues for some years and failed to make oVirt 4.4 work with any degree of acceptable stability but Oracle's variant of 4.4 proved to be rather better than 4.3 on CentOS7 with no noticable bugs, especially in the Hyperconverged setup that I am using with GlusterFS. I assumed that this was because Oracle based their 4.4 in fact on RHV 4.4 and not oVirt, but since they're not telling, who knows? One issue with 4.4 was that Oracle is pushing their UE-Kernel and that created immediate issues e.g. with VDO missing modules for UEK and other stuff, but that was solved easily enough by using the RHEL kernel. With 4.5 Oracle obviously can't use RHV 4.5 as a base, because there is no such thing with RHV declared EOL and according to Oracle their 4.5 is based on oVirt 4.5.4, which made the quality of that release somewhat questionable, but perhaps they have spent the year that has passed since productively killing bugs... only to be caught by surprise again, I presume, by an oVirt release 4.5.5 on December 1st, that no one saw coming! Long story slightly shorter, I've been testing Oracle's 4.5 variant a bit and it's not without issues. But much worse, Oracle's variant of oVirt seems to be entirely without any community that I could find. Now oVirt has been a somewhat secret society for years, but compared to what's going on with Oracle this forum is teaming with life! So did I just not look around enough? Is there a secret lair where all those OV users are hiding? Anyhow, here is what I've tested so far and where I'd love to have some feedback: 1. Setting up a three node HCI cluster from scratch using OL8.9 and OV 4.5 Since I don't have extra physical hardware for a 3 node HCI I'm using VMware workstation 17.5 on a Workstation running Windows 2022, a test platform that has been working for all kinds of virtualization tests from VMware ESXi, via Xcp-ng and ovirt. Created three VMs with OL8.9 minimal and then installed OV 4.5. I used the UEK default kernels and then had an issue when Ansible is trying to create the (local) management engine: the VM simply could not reach the Oracle repo servers to install the packages inside the ME. Since that VM is entirely under the control of Ansible and no console access of any type is possible in that installation phase, I couldn't do diagnostics. But with 4.4 I used to have similar issues and there switching back to the Redhat kernel for the ME (and the hosts) resolved them. But with 4.5 it seems that UEK has become a baked-in dependency: the OV team doesn't even seem to do any testing with the Redhat kernel any more. Or not with the HCI setup, which has become deprecated somewhere in oVirt 4.4... Or not with the Cockpit wizard, which might be in a totally untested state, or.... Doing the same install on OL 8.9 with OV 4.4, however, did work just fine and I was even able to update to 4.5 afterwards, which was a nice surprise... ...that I could not repeat on my physical test farm using three Atoms. There switching to the UEK kernel on the hosts caused issues, hosts were becoming unresponsive, file systems inaccessible, even if they were perfectly fine at the Gluster CLI level and in the end the ME VM simply would not longer start. Switching back to the Redhat kernel resolved things there. In short, switching between the Redhat kernel and UEK, which should be 100% transparent to all things userland including hypervisors, doesn't work. But my attempts to go with a clean install of 4.5 on a Redhat kernel or UEK is also facing issues. So far the only thing that has worked was a single node HCI install using UEK and OV 4.5 and upgrading to OV 4.5 on a virtualized triple node OV 4.4 HCI cluster. Anyone else out there trying these things? I was mostly determined to move to Proxmox VE, but Oracle's OV 4.5 seemed to be handing a bit of a life-line to oVirt and the base architecture is just much more powerful (or less manual) than Proxmox, which doesn't have a management engine.

8 12

VMs don't receive unicast packets, can't reach gateway, don't get ARP responses.
by jeff.parrish＠dentsu.com 26 Apr '24

26 Apr '24

Hey All, I'm reaching out because I'm working on a PoC ovirt setup, and running into some networking issues from my VMs that I just have not been able to nail down or figure out. Setup: Three Hypervisors running on the ovirt image, one NIC on each is connected to a trunk port on our data network, the other is connected to our storage network. I'm just running a basic test setup with three logical networks - ovirtmgmt, stroage, vm_network the vNics have no network filtering enabled, I have disabled and stopped firewalld on the hypervisors as well. ovirtmgmt and storage have IPs on the hypervisor, vm_network does not have an IP (Thought I did try it with no difference.) I currently just have three VMs running since it's a PoC, one on each host - they are all connected to the vm_network, and all are unable to reach their gateway (a linux device), and unable to reach each other unless they are on the same hypervisor - this is the main issue I'm dealing with. Investigation done so far: Running a ping from the VM to the Gateway IP and capturing data along the flow gives me this: If I run a tcpdump on the hypervisor I can see ARP requests being broadcasted on the correct interface (vm_network, vnet0) from the VM looking for the gateway, however I never see any ARP response from the gateway on the hypervisor, and the VMs never update their arp table and never actually attempt to send any ICMP packets. If I run a tcpdump on the gateway device, I can see ARP requests from the VM coming in, and I can see the gateway giving a unicast ARP reply - again I never see that arp reply on the hypervisor, and I never see it reach the VM. Now where it gets a little bit interesting at least. if I run an arping from the gateway device to the VM - I get a response from the VM on the broadcast arp, but I do not get any responses (or see any traffic on the hypervisor) when it moves to a unicast arp probe ping. After doing this the VM will also update it's ARP table with the gateway. If I attempt to ping the gateway from the VM after this, it will send ICMP packets, which do reach the gateway, the gateway does respond... but just like all other unicast things I never see that response on the hypervisor, and it never reaches the VM. (This only lasts for a short period of time until the VM fails to get a new ARP response and removes the entry from the arp table.) There is no firewall setup on the gateway that would prevent any of this traffic, and everything with that gateway, vlan, and IPs work just fine outside of ovirt. The behavior between VMs (on different hypervisors) is exactly the same as VM to Gateway. Where arp requests go out, the VM on a different hypervisor will see and respond to the arp broadcast request, but I never see that unicast ARP reply make it to a tcpdump on the hypervisor. TLDR: Broadcast traffic reaches the VMs, unicast packets from the VM reach their destination (If they have a record for them in their arp table), unicast replies and unicast requests to the VMs never even show up in a tcpdump on the hypervisor. No firewalls in place to explain any of these issues. I am sure I likely screwed something up during the configuration of this, but I don't see my mistake anywhere

1 1

Re: [External] : Can't create shared disk after upgrade to 4.5.4
by mahenderjoshi31＠gmail.com 26 Apr '24

26 Apr '24

Hi, I have also faced the same issue. can anyone suggest the appropriate solution for this one.

2 1

hosted-engine --deploy - trigger storage rescan
by Angus Clarke 26 Apr '24

26 Apr '24

Hello OLVM 4.5 - SHE install Our storage guy messed up the FC storage allocation -> when the SHE install got to ask about storage for the hosted_engine the expected LUN was not in the list. It took the process around an hour to get to this point so I didn't want to restart from the beginning, found that issuing a SIGHUP to the python3 process from another screen made it drop back to asking about storage again and went on to list the correctly provisioned LUNs - very useful but I didn't find mention of it in the man pages; sharing for prosperity. Regards Angus ... [ INFO ] ok: [localhost] The following luns have been found on the requested target: [1] 3600c0ff00052f2cb80912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [2] 3600c0ff00052f2cb8a912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [3] 3600c0ff00052f2cb8e912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [4] 3600c0ff00052f2cb92912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [5] 3600c0ff00052f2cb96912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [6] 3600c0ff00052f2d781912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [7] 3600c0ff00052f2d78b912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [8] 3600c0ff00052f2d78f912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [9] 3600c0ff00052f2d793912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active Please select the destination LUN (1, 2, 3, 4, 5, 6, 7, 8, 9) [1]:0 [ ERROR ] Invalid value Please select the destination LUN (1, 2, 3, 4, 5, 6, 7, 8, 9) [1]:? [ ERROR ] Invalid value Please select the destination LUN (1, 2, 3, 4, 5, 6, 7, 8, 9) [1]:r [ ERROR ] Invalid value Please select the destination LUN (1, 2, 3, 4, 5, 6, 7, 8, 9) [1]:[ ERROR ] Unable to get target list Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs)[nfs]:fc [ INFO ] Getting Fibre Channel LUNs list [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Obtain SSO token using username/password credentials] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get Fibre Channel LUNs] [ INFO ] ok: [localhost] The following luns have been found on the requested target: [1] 3600c0ff00052f2cb74912b6601000000 465.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [2] 3600c0ff00052f2cb80912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [3] 3600c0ff00052f2cb8a912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [4] 3600c0ff00052f2cb8e912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [5] 3600c0ff00052f2cb92912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [6] 3600c0ff00052f2cb96912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [7] 3600c0ff00052f2d771912b6601000000 465.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [8] 3600c0ff00052f2d775912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [9] 3600c0ff00052f2d781912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [10] 3600c0ff00052f2d78b912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [11] 3600c0ff00052f2d78f912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active [12] 3600c0ff00052f2d793912b6601000000 1862.0GiB HPE MSA 2050 SAN status: free, paths: 4 active Please select the destination LUN (1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12) [1]:7 [ INFO ] FC discard after delete is enabled [ INFO ] Creating Storage Domain [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] ... [ INFO ] Stage: Termination [ INFO ] Hosted Engine successfully deployed

1 0

Ovirt Hyperconverged
by eevans＠digitaldatatechs.com 25 Apr '24

25 Apr '24

CentOS 7 3 servers Gluster deployed without a problem. Hosted engine deployment failsL [ ERROR ] fatal: [localhost]: FAILED! => {"reason": "conflicting action statements: fail, msg\n\nThe error appears to be in '/usr/share/ansible/roles/ovirt.hosted_engine_setup/tasks/pre_checks/validate_mac_address.yml': line 14, column 5, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n register: he_vm_mac_addr\n - name: Fail if MAC address structure is incorrect\n ^ here\n"} I'm not dsure why this error occurs. I tried the same file from a different server and even tried a different server. Something is wrong with this file structure. Anyhelp is appreviated. Eric Evans

6 6