September 2015 - Users - oVirt List Archives

Network Address Change
by Paul.LKW 28 Dec '22

28 Dec '22

Hi All: I just has a case, I need to change the oVirt host and engine IP address due to data center decommission I checked in the hosted-engine host there are some files I could change ; in ovirt-hosted-engine/hosted-engine.conf ca_subject="O=simple.com, CN=1.2.3.4" gateway=1.2.3.254 and of course I need to change the ovirtmgmt interface IP too, I think just change the above line could do the tick, but where could I change the other host IP in the cluster ? I think I have to be lost all the host as once changed the hosted-engine host IP as it is in diff. sub net. Does there any command line tools could do that or someone has such experience could share? Best Regards, Paul.LKW

4 6

[Users] Problem Creating "oVirtEngine" Machine
by Richie＠HIP 15 May '19

15 May '19

--Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=windows-1252 I can't agree with you more. Modifying every box's or Virtual Machine's = HOSTS file with a FQDN and IP SHOULD work, but in my case it is not. = There are several reasons I've come to believe could be the problem = during my trial-and-errors testing and learning. FIRST - MACHINE IPs. THe machine's "Names" where not appearing in the Microsoft Active = Directory DHCP along with their assigned IPs; in other words, the DHCP = just showed an "Assigned IP", equal to the Linux Machine's IP, with a = <empty> ('i.e. blank, none, silch, plan old "no-letters-or-numbers") = "Name" in the "Name" (i.e. machines "network name", or FQDN-value used = by the Windows AD DNS-service) column. =20 if your IP is is appearing with an <empty> "name", there is no "host = name" to associate the IP, it makes it difficult to define a FQDN; which = isn't that useful if we're going to use the HOSTS files in all = participating machines in an oVirt Installation. I kept banging my head for three (3) long hours trying to find the = problem. In Fedora 18, I could't find where the "network name" of the machine = could be defined. =20 I tried putting the "Additional Search Domains" and/or "DHCP Client ID" = in Fedora's 18 Desktop - under "System Settings > Hardware > Network > = Options > IPv4 Setting" The DHCP went crazy; showing an "Aberrant-MAC-Address" (i.e. a really = long-sting value where the machine's MAC address should be), and we knew = the MAC address as we obtained using "ifconfig" on the machine getting = it's IP from the DHCP. So we reverted these entries from the = aforementioned, rebooted, and got an assigned IP, with proper MAC = address, but still no "Name" Kept wondering around the "Settings" and seeing which one made sense, = but what the heck, I went for it. =20 Under "System Settings > System > Details" I found the information about = GNOME and the machine's hardware. =20 There was a field for "Device Name" that originally had = "localhost.localdomain"; I changed the value to "ovirtmanager". and = under "Graphic" changed to "Forced Fallback Mode" to "ON". =20 I also installed all Kerberos libraries and client (i.e. authconfig-gtk, = authhub, authhub-client, krb5-apple-clents, krb5-auth-dialog, = krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) and rebooted VOILA=85!!! =20 I don;t know if it was the definition of "Device Name" from = "localhost.localdomain" to "ovirtengine", of the Kerberos libraries = install, or both. But finally the MS AD DHCP was showing the = Addigned-IP, the machine "Name" and the proper MAC-address. Regardless, = setting the machine's "Network Name" under "System Settings > System > = Details > Device Name", with no explanation of what "Device Name" meant = or was used for, was the last place I would have imagined this network = setting could be defined. NOTE - Somebody has to try the two steps I did together, separately. to = see which one is the real problem-solver; for me it is working, and "if = it ain't broke, don't fix it=85" Now that I have the DHCP / IP thing sorted, I have to do the DNS stuff. To this point, I've addressed the DHCP and "Network Name" of the = IP-Lease (required for the DNS to work). This still does't completely = explain why, by modifying the HOSTS file (allowing be to set and IP and = non-DNS FQDN). allows me to install the oVirtEngine "as long as I do not = use default HTTPd service parameters as suggested by the install". By = using the HOST file to "define" FQDNs, AND NOT using the default HTTPd = suggested changes, I'm able to install the oVirtEngine (given that I use = ports 8700 and 8701) to access the "oVirtEngine Welcome Screen", BUT = NONE of the "oVirt Portals" work=85 YET=85!!! More to come during the week Richie Jos=E9 E ("Richie") Piovanetti, MD, MS=20 M: 787-615-4884 | richiepiovanetti(a)healthcareinfopartners.com On Aug 2, 2013, at 3:10 AM, Joop <jvdwege(a)xs4all.nl> wrote: > Hello Ritchie, >=20 >> In a conversation via IRC, someone suggested that I activate = "dnsmask" to overcome what appears to be a DNS problem. I'll try that = other possibility once I get home later today. >>=20 >> In the mean time, what do you mean by "fixing the hostname"=85? I = opened and fixed the HOSTNAMES and changed it from = "localhost-localdomain" to "localhost.localdomain" and that made no = difference. Albeit, after changing I didm;t restart, remove ovirtEngine = ((using "engine-cleanup") and reinstalled via "engine-setup". Is that = what you mean=85? >>=20 >>=20 >>=20 >> In the mean time, the fact that even if I resolve the issue of = oVirtEngine I will not be able to connect to the oVirt Nodes unless I = have DNS resolution, apparently means I should do something with = resolving via DNS in my home LAN (i.e implement some sort of "DNS Cache" = so I can resolve my home computers via DNS inside my LAN). >>=20 >> Any suggestions are MORE THAN WELCOME=85!!! >> =20 >=20 > Having setup ovirt more than I can count right now I share your = feeling that it isn't always clear why things are going wrong, but in = this case I suspect that there is a rather small thing missing. > In short if you setup ovirt-engine, either using virtualbox or on real = hardware, and you give your host a meaningfull name AND you add that = info also in your /etc/hosts file than things SHOULD work, no need for = dnsmasq or even bind. Would make things easier once you start adding = virt hosts to you infrastructure since you will need to duplicate these = actions on each host (add engine name/ip to each host and add each host = to the others and all hosts to engine) >=20 > Just ask if you need more assistance and I will write down a small = howto that should work out of the box else I might have some time to see = if I can get things going. >=20 > Regards, >=20 > Joop >=20 --Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=windows-1252 <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html = charset=3Dwindows-1252"></head><body style=3D"word-wrap: break-word; = -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">I = can't agree with you more.  Modifying every box's or Virtual = Machine's HOSTS file with a FQDN and IP SHOULD work, but in my case it = is not.  There are several reasons I've come to believe could be = the problem during my trial-and-errors testing and = learning.<div><div> </div><div>FIRST - MACHINE IPs.</div><ul = class=3D"MailOutline"><li>THe machine's "Names" where not appearing in = the Microsoft Active Directory DHCP along with their assigned = IPs; in other words, the DHCP just showed an "Assigned IP", equal to the = Linux Machine's IP, with a <empty> ('i.e. blank, none, silch, plan = old "no-letters-or-numbers") "Name" in the "Name" (i.e. machines = "network name", or FQDN-value used by the Windows AD DNS-service) = column.  </li><li>if your IP is is appearing with an <empty> = "name", there is no "host name" to associate the IP, it makes it = difficult to define a FQDN; which isn't that useful if we're going to = use the HOSTS files in all participating machines in an oVirt = Installation.</li><li>I kept banging my head for three (3) long hours = trying to find the problem.</li><ul><li>In Fedora 18, I could't find = where the "network name" of the machine could be defined. =  </li><li>I tried putting the "Additional Search Domains" and/or = "DHCP Client ID" in Fedora's 18 Desktop - under "System Settings > = Hardware > Network > Options > IPv4 Setting"</li><ul><li>The = DHCP went crazy;  showing an "Aberrant-MAC-Address" (i.e. a really = long-sting value where the machine's MAC address should be), and we knew = the MAC address as we obtained using "ifconfig" on the machine getting = it's IP from the DHCP.  So we reverted these entries from the = aforementioned, rebooted, and got an assigned IP, with proper MAC = address, but still no "Name"</li></ul><li>Kept wondering around the = "Settings" and seeing which one made sense, but what the heck, I went = for it.  </li><ul><li>Under "System Settings > System > = Details" I found the information about GNOME and the machine's hardware. =  </li><li>There was a field for "Device Name" that originally had = "localhost.localdomain"; I changed the value to "ovirtmanager". and = under "Graphic" changed to "Forced Fallback Mode" to "ON". =  </li><li>I also installed all Kerberos libraries and client (i.e. = authconfig-gtk, authhub, authhub-client, krb5-apple-clents, = krb5-auth-dialog, krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) = and rebooted</li><li>VOILA=85!!!  </li></ul><li>I don;t know if it = was the definition of "Device Name" from "localhost.localdomain" to = "ovirtengine", of the Kerberos libraries install, or both.  But = finally the MS AD DHCP was showing the Addigned-IP, the machine "Name" = and the proper MAC-address.  Regardless, setting the machine's = "Network Name" under "System Settings > System > Details = > Device Name", with no explanation of what "Device Name" meant = or was used for, was the last place I would have imagined this = network setting could be defined.</li><li>NOTE - Somebody has to = try the two steps I did together, separately. to see which one is the = real problem-solver; for me it is working, and "if it ain't broke, don't = fix it=85"</li></ul></ul><div> </div><div>Now that I have the DHCP / = IP thing sorted, I have to do the DNS stuff.</div><div> </div><div>To = this point, I've addressed the DHCP and "Network Name" of the IP-Lease = (required for the DNS to work).  This still does't completely = explain why, by modifying the HOSTS file (allowing be to set and IP and = non-DNS FQDN). allows me to install the oVirtEngine "as long as I = do not use default  HTTPd service parameters as suggested by the = install".  By using the HOST file to "define" FQDNs, AND = NOT using the default HTTPd suggested changes, I'm able to install the = oVirtEngine (given that I use ports 8700 and 8701) to access the = "oVirtEngine Welcome Screen", BUT NONE of the "oVirt Portals" work=85 = YET=85!!!</div><div> </div><div>More to come during the = week</div><div> </div><div>Richie</div><div = apple-content-edited=3D"true"> Jos=E9 E ("Richie") Piovanetti, MD, = MS  M: 787-615-4884 | <a = href=3D"mailto:richiepiovanetti@healthcareinfopartners.com">richiepiovanet= ti(a)healthcareinfopartners.com</a> </div> <div><d= iv>On Aug 2, 2013, at 3:10 AM, Joop <<a = href=3D"mailto:jvdwege@xs4all.nl">jvdwege(a)xs4all.nl</a>> = wrote:</div> <blockquote = type=3D"cite">Hello Ritchie, <blockquote type=3D"cite">In a = conversation via IRC, someone suggested that I activate "dnsmask" to = overcome what appears to be a DNS problem.  I'll try that other = possibility once I get home later today. In the mean time, what = do you mean by "fixing the hostname"=85?  I opened and fixed the = HOSTNAMES and changed it from "localhost-localdomain" to = "localhost.localdomain" and that made no difference.  Albeit, after = changing I didm;t restart, remove ovirtEngine ((using "engine-cleanup") = and reinstalled via "engine-setup".  Is that what you = mean=85? In the mean time, the fact that even if I = resolve the issue of oVirtEngine I will not be able to connect to the = oVirt Nodes unless I have DNS resolution, apparently means I should do = something with resolving via DNS in my home LAN (i.e implement some sort = of "DNS Cache" so I can resolve my home computers via DNS inside my = LAN). Any suggestions are MORE THAN WELCOME=85!!! =   </blockquote> Having setup ovirt more than I can count = right now I share your feeling that it isn't always clear why things are = going wrong, but in this case I suspect that there is a rather small = thing missing. In short if you setup ovirt-engine, either using = virtualbox or on real hardware, and you give your host a meaningfull = name AND you add that info also in your /etc/hosts file than things = SHOULD work, no need for dnsmasq or even bind. Would make things easier = once you start adding virt hosts to you infrastructure since you will = need to duplicate these actions on each host (add engine name/ip to each = host and add each host to the others and all hosts to = engine) Just ask if you need more assistance and I will write = down a small howto that should work out of the box else I might have = some time to see if I can get things = going. Regards, Joop </blockquote></div> </div></b= ody></html>= --Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241--

2 1

[Users] oVirt Weekly Sync Meeting Minutes -- 2012-05-23
by Mike Burns 15 May '19

15 May '19

Minutes: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.html Minutes (text): http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.txt Log: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html ========================= #ovirt: oVirt Weekly Sync ========================= Meeting started by mburns at 14:00:23 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html . Meeting summary --------------- * agenda and roll call (mburns, 14:00:41) * Status of next release (mburns, 14:05:17) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822145 (mburns, 14:05:29) * AGREED: freeze date and beta release delayed by 1 week to 2012-06-07 (mburns, 14:12:33) * post freeze, release notes flag needs to be used where required (mburns, 14:14:21) * https://bugzilla.redhat.com/show_bug.cgi?id=821867 is a VDSM blocker for 3.1 (oschreib, 14:17:27) * ACTION: dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas (oschreib, 14:21:44) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822158 (mburns, 14:23:39) * assignee not available, update to come tomorrow (mburns, 14:24:59) * ACTION: oschreib to make sure BZ#822158 is handled quickly (oschreib, 14:25:29) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824397 (mburns, 14:28:55) * 824397 expected to be merged prior next week's meeting (mburns, 14:29:45) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824420 (mburns, 14:30:15) * tracker for node based on F17 (mburns, 14:30:28) * blocked by util-linux bug currently (mburns, 14:30:40) * new build expected from util-linux maintainer in next couple days (mburns, 14:30:55) * sub-project status -- engine (mburns, 14:32:49) * nothing to report outside of blockers discussed above (mburns, 14:34:00) * sub-project status -- vdsm (mburns, 14:34:09) * nothing outside of blockers above (mburns, 14:35:36) * sub-project status -- node (mburns, 14:35:43) * working on f17 migration, but blocked by util-linux bug (mburns, 14:35:58) * should be ready for freeze deadline (mburns, 14:36:23) * Review decision on Java 7 and Fedora jboss rpms in oVirt Engine (mburns, 14:36:43) * Java7 basically working (mburns, 14:37:19) * LINK: http://gerrit.ovirt.org/#change,4416 (oschreib, 14:39:35) * engine will make ack/nack statement next week (mburns, 14:39:49) * fedora jboss rpms patch is in review, short tests passed (mburns, 14:40:04) * engine ack on fedora jboss rpms and java7 needed next week (mburns, 14:44:47) * Upcoming Workshops (mburns, 14:45:11) * NetApp workshop set for Jan 22-24 2013 (mburns, 14:47:16) * already at half capacity for Workshop at LinuxCon Japan (mburns, 14:47:37) * please continue to promote it (mburns, 14:48:19) * proposal: board meeting to be held at all major workshops (mburns, 14:48:43) * LINK: http://www.ovirt.org/wiki/OVirt_Global_Workshops (mburns, 14:49:30) * Open Discussion (mburns, 14:50:12) * oVirt/Quantum integration discussion will be held separately (mburns, 14:50:43) Meeting ended at 14:52:47 UTC. Action Items ------------ * dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas * oschreib to make sure BZ#822158 is handled quickly Action Items, by person ----------------------- * dougsland * dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas * oschreib * oschreib to make sure BZ#822158 is handled quickly * **UNASSIGNED** * (none) People Present (lines said) --------------------------- * mburns (98) * oschreib (55) * doronf (12) * lh (11) * sgordon (8) * dougsland (8) * ovirtbot (6) * ofrenkel (4) * cestila (2) * RobertMdroid (2) * ydary (2) * rickyh (1) * yzaslavs (1) * cctrieloff (1) * mestery_ (1) * dustins (1) Generated by `MeetBot`_ 0.1.4 .. _`MeetBot`: http://wiki.debian.org/MeetBot

2 1

[QE][ACTION REQUIRED] oVirt 3.5.1 RC status - postponed
by Sandro Bonazzola 15 May '19

15 May '19

Hi, We have still blockers for oVirt 3.5.1 RC release so we need to postpone it until they'll be fixed. The bug tracker [1] shows 1 open blocker: Bug ID Whiteboard Status Summary 1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. - ACTION: Gilad please provide ETA on above blocker, the new proposed RC date will be decided on the given ETA. Maintainers: - Please be sure that 3.5 snapshot allow to create VMs - Please be sure that no pending patches are going to block the release - If any patch must block the RC release please raise the issue as soon as possible. There are still 57 bugs [2] targeted to 3.5.1. Excluding node and documentation bugs we still have 37 bugs [3] targeted to 3.5.1. Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed. - ACTION: Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1: it will ease gathering the blocking bugs for next releases. - ACTION: Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr [4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

2 1

[Users] Lifecycle / upgradepath
by Sven Kieske 11 May '19

11 May '19

Hi Community, Currently, there is no single document describing supported (which means: working ) upgrade scenarios. I think the project has matured enough, to have such an supported upgradepath, which should be considered in the development of new releases. As far as I know, currently it is supported to upgrade from x.y.z to x.y.z+1 and from x.y.z to x.y+1.z but not from x.y-1.z to x.y+1.z directly. maybe this should be put together in a wiki page at least. also it would be cool to know how long a single "release" would be supported. In this context I would define a release as a version bump from x.y.z to x.y+1.z or to x+1.y.z a bump in z would be a bugfix release. The question is, how long will we get bugfix releases for a given version? What are your thoughts? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

2 1

[Users] Nested virtualization with Opteron 2nd generation and oVirt 3.1 possible?
by Gianluca Cecchi 11 May '19

11 May '19

Hello, I have 2 physical servers with Opteron 2nd gen cpu. There is CentOS 6.3 installed and some VM already configured on them. Their /proc/cpuinfo contains ... model name : Dual-Core AMD Opteron(tm) Processor 8222 ... kvm_amd kernel module is loaded with its default enabled nested option # systool -m kvm_amd -v Module = "kvm_amd" Attributes: initstate = "live" refcnt = "15" srcversion = "43D8067144E7D8B0D53D46E" Parameters: nested = "1" npt = "1" ... I already configured a fedora 17 VM as a oVirt 3.1 Engine I'm trying to configure another VM as oVirt 3.1 node with ovirt-node-iso-2.5.5-0.1.fc17.iso It seems I'm not able to configure so that ovirt install doesn't complain. After some attempts, I tried this in my vm.xml for the cpu: <cpu mode='custom' match='exact'> <model fallback='allow'>athlon</model> <vendor>AMD</vendor> <feature policy='require' name='pni'/> <feature policy='require' name='rdtscp'/> <feature policy='force' name='svm'/> <feature policy='require' name='clflush'/> <feature policy='require' name='syscall'/> <feature policy='require' name='lm'/> <feature policy='require' name='cr8legacy'/> <feature policy='require' name='ht'/> <feature policy='require' name='lahf_lm'/> <feature policy='require' name='fxsr_opt'/> <feature policy='require' name='cx16'/> <feature policy='require' name='extapic'/> <feature policy='require' name='mca'/> <feature policy='require' name='cmp_legacy'/> </cpu> Inside node /proc/cpuinfo becomes processor : 3 vendor_id : AuthenticAMD cpu family : 6 model : 2 model name : QEMU Virtual CPU version 0.12.1 stepping : 3 microcode : 0x1000065 cpu MHz : 3013.706 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall mmxext fxsr_opt lm nopl pni cx16 hypervisor lahf_lm cmp_legacy cr8_legacy bogomips : 6027.41 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: 2 questions: 1) Is there any combination in xml file to give to my VM so that oVirt doesn't complain about missing hardware virtualization with this processor? 2) suppose 1) is not possible in my case and I still want to test the interface and try some config operations to see for example the differences with RHEV 3.0, how can I do? At the moment this complaint about hw virtualization prevents me to activate the node. I get Installing Host f17ovn01. Step: RHEV_INSTALL. Host f17ovn01 was successfully approved. Host f17ovn01 running without virtualization hardware acceleration Detected new Host f17ovn01. Host state was set to Non Operational. Host f17ovn01 moved to Non-Operational state. Host f17ovn01 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags Can I lower the requirements to be able to operate without hw virtualization in 3.1? Thanks in advance, Gianluca

2 1

Need VM run once api
by Chandrahasa S 09 May '19

09 May '19

This is a multipart message in MIME format. --=_alternative 00361B2065257E90_= Content-Type: text/plain; charset="US-ASCII" Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00361B2065257E90_= Content-Type: text/html; charset="US-ASCII" Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00361B2065257E90_=--

5 4

[Users] importing from kvm into ovirt
by Jonathan Horne 29 Apr '19

29 Apr '19

--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable I need to import a kvm virtual machine from a standalone kvm into my ovirt = cluster. Standalone is using local storage, and my ovirt cluster is using = iscsi. Can i please have some advice on whats the best way to get this sys= tem into ovirt? Right now i see it as copying the .img file to somewhere=85 but i have no i= dea where to start. I found this directory on one of my ovirt nodes: /rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/master/v= ms But inside is just directories that appear to have uuid-type of names, and = i can't tell what belongs to which vm. Any advice would be greatly appreciated. Thanks, jonathan ________________________________ This is a PRIVATE message. If you are not the intended recipient, please de= lete without copying and kindly advise us by e-mail of the mistake in deliv= ery. NOTE: Regardless of content, this e-mail shall not operate to bind SKO= POS to any order or other contract unless pursuant to explicit written agre= ement or government initiative expressly permitting the use of e-mail for s= uch purpose. --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/html; charset="Windows-1252" Content-ID: <41FAB2B157C43549B6577A3495BA255C(a)collaborationhost.net> Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1= 252"> </head> <body style=3D"word-wrap:break-word; color:rgb(0,0,0); font-size:14px; font= -family:Calibri,sans-serif"> <div> <div> <div>I need to import a kvm virtual machine from a standalone kvm into my o= virt cluster.  Standalone is using local storage, and my ovirt cluster= is using iscsi.  Can i please have some advice on whats the best way = to get this system into ovirt?</div> </div> </div> <div> </div> <div>Right now i see it as copying the .img file to somewhere=85 but i have= no idea where to start.  I found this directory on one of my ovirt no= des:</div> <div> </div> <div>/rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/mas= ter/vms</div> <div> </div> <div>But inside is just directories that appear to have uuid-type of names,= and i can't tell what belongs to which vm.</div> <div> </div> <div>Any advice would be greatly appreciated.</div> <div> </div> <div>Thanks,</div> <div>jonathan</div> <hr> This is a PRIVATE message. I= f you are not the intended recipient, please delete without copying and kin= dly advise us by e-mail of the mistake in delivery. NOTE: Regardless of con= tent, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit wri= tten agreement or government initiative expressly permitting the use of e-m= ail for such purpose. </body> </html> --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_--

3 2

Trying to reset password for ovirt wiki
by noc 08 Apr '19

08 Apr '19

This is a multi-part message in MIME format. --------------000005070002050708050606 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hoping someone can help me out. For some reason I keep getting the following error when I try to reset my password: Reset password * Error sending mail: Failed to add recipient: jvandewege(a)nieuwland.nl [SMTP: Invalid response code received from server (code: 554, response: 5.7.1 <jvandewege(a)nieuwland.nl>: Relay access denied)] Complete this form to receive an e-mail reminder of your account details. Since I receive the ML on this address it is definitely a working address. Tried my home account too and same error but then for my home provider, Relay denied ?? A puzzled user, Joop --------------000005070002050708050606 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hoping someone can help me out. For some reason I keep getting the following error when I try to reset my password: <fieldset><legend>Reset password</legend> <div class="error"> <ul> <li>Error sending mail: Failed to add recipient: <a class="moz-txt-link-abbreviated" href="mailto:jvandewege@nieuwland.nl">jvandewege(a)nieuwland.nl</a> [SMTP: Invalid response code received from server (code: 554, response: 5.7.1 <a class="moz-txt-link-rfc2396E" href="mailto:jvandewege@nieuwland.nl"><jvandewege(a)nieuwland.nl></a>: Relay access denied)]</li> </ul> </div> Complete this form to receive an e-mail reminder of your account details. </fieldset> Since I receive the ML on this address it is definitely a working address. Tried my home account too and same error but then for my home provider, Relay denied ?? A puzzled user, Joop </body> </html> --------------000005070002050708050606--

2 1

ovirt-guest-agent issue on rhel5.5
by John Michael Mercado 08 Apr '19

08 Apr '19

Hi All, I need your help. Anyone who encounter the below error and have the solution? Can you help me how to fix this? MainThread::INFO::2015-01-27 10:22:53,247::ovirt-guest-agent::57::root::Starting oVirt guest agent MainThread::ERROR::2015-01-27 10:22:53,248::ovirt-guest-agent::138::root::Unhandled exception in oVirt guest agent! Traceback (most recent call last): File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 132, in ? agent.run(daemon, pidfile) File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 63, in run self.agent = LinuxVdsAgent(config) File "/usr/share/ovirt-guest-agent/GuestAgentLinux2.py", line 371, in __init__ AgentLogicBase.__init__(self, config) File "/usr/share/ovirt-guest-agent/OVirtAgentLogic.py", line 171, in __init__ self.vio = VirtIoChannel(config.get("virtio", "device")) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 150, in __init__ self._stream = VirtIoStream(vport_name) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 131, in __init__ self._vport = os.open(vport_name, os.O_RDWR) OSError: [Errno 2] No such file or directory: '/dev/virtio-ports/com.redhat.rhevm.vdsm' Thanks

2 1

[Users] oVirt Workshop at LinuxCon Japan 2012
by Leslie Hawthorn 08 Apr '19

08 Apr '19

Hello everyone, As part of our efforts to raise awareness of and educate more developers about the oVirt project, we will be holding an oVirt workshop at LinuxCon Japan, taking place on June 8, 2012. You can find full details of the workshop agenda on the LinuxCon Japan site. [0] Registration for the workshop is now open and is free of charge for the first 50 participants. We will also look at adding additional participant slots to the workshop based on demand. Attendees who register for LinuxCon Japan via the workshop registration link [1] will also be eligible for a discount on their LinuxCon Japan registration. Please spread the word to folks you think would find the workshop useful. If they have already registered for LinuxCon Japan, they can simply edit their existing registration to include the workshop. [0] - https://events.linuxfoundation.org/events/linuxcon-japan/ovirt-gluster-work… [1] - http://www.regonline.com/Register/Checkin.aspx?EventID=1099949 Cheers, LH -- Leslie Hawthorn Community Action and Impact Open Source and Standards @ Red Hat identi.ca/lh twitter.com/lhawthorn

2 1

[Users] Moving iSCSI Master Data
by rni＠chef.net 07 Apr '19

07 Apr '19

--========GMXBoundary282021374122634158505 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Hi, it's me again.... I started my oVirt 'project' as a proof of concept,.. but it happend as always, it became production Now, I've to move the iSCSI Master data to the real iSCSI traget. Is there any way to do this, and to become rid of the old Master Data? Thank you for your help Hans-Joachim --========GMXBoundary282021374122634158505 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable Hi, it's me again.... I started my oVirt 'project' as a proof= of concept,.. but it happend as always, it became production <img alt= =3D" " title=3D" " src=3D"http://images.gmx.com/images/outsource/applicatio= n/mailclient/mailcom/resource/mailclient/icons/blue/emoticons/animated/S_02= -516742918.gif" /> Now, I've to move the iSCSI Master data to th= e real iSCSI traget. Is there any way to do this, and to become rid of= the old Master Data? Thank you fo= r your help Hans-Joachim --========GMXBoundary282021374122634158505--

3 2

[Users] Can't access RHEV-H aka ovirt-node
by Scotto Alberto 11 Mar '19

11 Mar '19

--_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: multipart/alternative; boundary="_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_" --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi all, I can't login to the hypervisor, neither as root nor as admin, neither from= another computer via ssh nor directly on the machine. I'm sure I remember the passwords. This is not the first time it happens: l= ast time I reinstalled the host. Everything worked ok for about 2 weeks, an= d then... What's going on? Is it a known behavior, somehow? Before rebooting the hypervisor, I would like to try something. RHEV Manage= r talks to RHEV-H without any problems. Can I login with RHEV-M's keys? how= ? Thank you all. Alberto Scotto [Blue] Via Cardinal Massaia, 83 10147 - Torino - ITALY phone: +39 011 29100 al.scotto(a)reply.it www.reply.it ________________________________ -- The information transmitted is intended for the person or entity to which i= t is addressed and may contain confidential and/or privileged material. Any= review, retransmission, dissemination or other use of, or taking of any ac= tion in reliance upon, this information by persons or entities other than t= he intended recipient is prohibited. If you received this in error, please = contact the sender and delete the material from any computer. --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <style>  </style> </head> <body lang=3D"IT" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> Hi all, I can’t login to the hype= rvisor, neither as root nor as admin, neither from another computer via ssh= nor directly on the machine. I’m sure I remember the p= asswords. This is not the first time it happens: last time I reinstalled th= e host. Everything worked ok for about 2 weeks, and then... What’s going on? Is it a = known behavior, somehow? Before rebooting the hypervisor= , I would like to try something. RHEV Manager talks to RHEV-H without any p= roblems. Can I login with RHEV-M’s keys? how?   Thank you all. </div> <div align=3D"left"> Alberto Scotto <img border=3D"0" alt=3D"Blue" src=3D"cid:bde= 5ac62d10545908e269a6006dbd5ac" style=3D"margin:0px"> Via Cardinal Massaia, 83 10147 - Torino - ITALY phone: +39 011 29100 <a href=3D"al.scotto(a)reply.it" target=3D"" style=3D"color:blue; text-decora= tion:underline">al.scotto(a)reply.it</a> <a title=3D"" href=3D"www.reply.it" target=3D"" style=3D"color:blue; text-d= ecoration:underline">www.reply.it</a>   </div> <hr> -- The information transmitted is intended for the person or entity to which i= t is addressed and may contain confidential and/or privileged material. Any= review, retransmission, dissemination or other use of, or taking of any ac= tion in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If= you received this in error, please contact the sender and delete the mater= ial from any computer. </body> </html> --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_-- --_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: image/png; name="blue.png" Content-Description: blue.png Content-Disposition: inline; filename="blue.png"; size=2834; creation-date="Tue, 11 Sep 2012 14:14:44 GMT"; modification-date="Tue, 11 Sep 2012 14:14:44 GMT" Content-ID: <bde5ac62d10545908e269a6006dbd5ac> Content-Transfer-Encoding: base64 iVBORw0KGgoAAAANSUhEUgAAAIwAAAAyCAYAAACOADM7AAAABmJLR0QA/gD+AP7rGNSCAAAACXBI WXMAAA3XAAAN1wFCKJt4AAAACXZwQWcAAACMAAAAMgCR0D3bAAAKaUlEQVR42u2ce5AUxRnAf313 3Al4eCAYFaIgyMNEUF6KlYoVIDBArDxqopWxQgViQlWsPHA0MUlZVoyKRsdSE4lGomjIaHS0UlHL wTIPpEgQFQUUjYIWdfIIScyBHi/Z6/zRM1xP3yzs7t3unOX8qra2H9M9vb3f9Pf19/WukFKSk1Mq dVkPIOejRS4wOWXR6wVGuP5I4foDsh5HjkL0VhtGuP5A4CFgNrAD+Lb0nKeyHtfHnd68wixGCQvA qcA9wvWPy3pQH3caan1D4fonAYeBDwEZjaFflAaok56zHRhsNG0B+gAHSrhHarn0nFp/3NLnxbKP B06I5kECO2UYZD2sLtRcYIBJwK+BoYBACU89cAjoAIRw/TuAJcClQGy//FJ6zvvH6ly4/qXAz4vU HQA2A4H0nIcz+OxH41eAHaU3AhdkPaA0MrFhhOuPB2YA5wBnA6ehni5dgKcBu4C5wLZS7Rfh+g8A 80u49HHgEuk5h2s+AeaYLbsO2AKMiIqWyzBYkPW40shihUF6zkbUUwSAcP0G4FHgS9pl10rPmQMs LbXfSBVNLPHyrwDfBO7JYg4MRqEempjnsh5QMXqL0Xsl8EUt3w5cXUE/w4AztfzzwGSUGrwoyuvM yfqDR5yLUssxL2U9oGJkssLoCNdfjLJXdBZIz9lQQXcTgSYt/4z0nHjy1wvX3wW8oNX3O8q4TgKm AGegjNB/As9JzzmYer1lTwKGoOyyV2UYtArLngLMQ9lh64EVRQxZ3V5pje4V9zsVGBRl22QYrDXu e0HUvwD+K8NgXbe/lKOQqcAI178MuM0ovk16zqMVdjnNyL9g5E2DrTVlTP1RRvM3gIFG9RvC9RdK z/lHoo2yQQJgeFR0hbDsT6FUns544Icp456qpV+RYaAL5RJgepR+FWXzxfcdA6zRrr0SqKrAZKaS hOt/DbjXKH5Geo7bjW71iT8AvGLUzzXyfzfGNBBlPyymq7AAjAWeFK5/slE+AvhklC4At6KEZb9x 3cJo+9x5T8s+ERinFa012uzU0vuMuu9r6W3AXd2Yu5LIRGCE618E/D6l6rpu9Hk8MEEr2iQ9p1Wr n4wShJgPgCeMbh6g02jeB9wILASe1q4ZBHzBaDeRThukHghRdskoQF+NmlH+JJ0JqB1ijCkw72np jiOfx7JPQrkdYm6QYXBMH1V3qYlKEq7fhNLvw1CTeztK55rcJlz/s8XshGPwaeBELd8sXP961Bd4 Bsqo1u2bm6Tn7NbGeCHKMI6ZLz3nsajuT6gtfjxfpxr31lXhThkG8470a9mrtPp2uq4652np94FN Rr0uMM1a+jI6fVTvAMsrmLOy6VGBEa5fB3wOpctHaK9TgVOAxmN0MRXlwPpWBbefYuTHAj8tcu39 0nNuMMq+qqXfjoUl4mSSq/HbRlv9S3/ZqBumpXcB/zPqz9fSm2UY/Nuo1wWmCUBYdiPwHa3ck2Hw YQVzVjbVWGFmkW7YmewDfga8CNwHnB6VXyZcf7X0nAfLvG8pntE3gSXSc5an1Olf+hDh+i+jVieJ UiOxwBSiMQMgLLsFOEtr+7xWB8rQjdkgw0BXK40o1RWTZrDu0dKx0X4xylMOynZZVuZcVUyPCoz0 nA7gR8L1N6FWmQIqZtRGpwoSwF7gRek5WwCE658P3A9Y0TV3C9ffUOrWOlrZdIfdXuBhlCqaqZU/ myYs0RZaNzybUV7oNFqBt7T8BJJ2iW6zDAPGFKkDGE1yBTLtF0gKTCF6/4FWtsTYVVWVqtgw0nNW lHn9LmCOcP2bgKuAvsAtqNWqFGLVF7NGes4i4fpjgNfpFNbzi7QfD/TX8vtQMa40VkvPKWh5fWfW DuhCfg5Ju8nc5k/RxpZYuTR0gWkTlj0D5YgEeJca2S4xvcXTC4D0nKvpdNWXc2hqEiqSHROrhR0k bYAzhesPTmmvG61tKAE6PXoNRRnTg6OX6VvRhfB1GQa7tbyu5v6D8qNQpH4bsDVlbLrADACu0fK/ qOXqAr1MYCLip7AcI+48I78WIIpuv6mVN5NUPWntN0nP2So9p016ThtwEKU6RpIMOyAsuw9JVWiu INO19AYZBma0fbKWXi/DoEBX9tBpu4wDLozS2+jqx6o6vVFgYt+JKKON/pTvJ6kWzKc6LTg5XEtv MeruAF5DqbZVgH6IayTJoOHf4oSw7LNICuKTeqfCsj9BUnhN+yamPXqZc3JrLfwuJpnHklKIBaa+ lIuF67eQ3KW8HtlEMabhPCmlG/3JnhX5ZHaifDeLtLqlxpmcySQfuvnCstdH6WXaZ9iPMsJ1xpOM ZaXZL6DsqfcB3UO8A7WzrDm9T2DqG7dTOHSIEgUGIc5GyhatZJ1Rv4HkmZ/xKb08o5UPRa0UkuQT vY6uQVJTFc5D7fQ6SNpUN8ow2GVcq7sB2ugq2DGHUYfLdG6SYbCPDMhcYIRlJwWjcGg/Z1/yATBE zJxXT0Pf4o0P7pWcO39W4nuVHS+JGfPq6dMXOjpgzNyt9En0MUF877fDee3x1iPlo2beTOPxnwGh qzahuhUAjwCLpOeYKkDfIT2BUl1XkxT2+2QYXJ8yen0H+JYMgz2kY9o126mh38UkITBRYGwp5e1Q usNjwL/Ql3VRX2D35mUI0UB90wyOZmc19i+wa+NB+vTrnMA9re00RO3q6iRbVtYxeOzt1NXHS3od e96dRkPT6CN9v/HUIRr738Dg0bMRDSdQVzeAjsJh+ra8SfMpf5S3XNzFoSYsewhJVbhKhoEnLDtE HV4vRGXPprQFFTdrRklk2u4opoVkyMOTYbCfjEgc0RSWPQhlQ/SruMfymCrD4IXud1N7In+ILgzT ZRj8tYfvcSLwOzoPer0DjKv1VlrHVEltqBhMafZD99mR1QfvAXT1tYfiNkhZCMvuD1yLCtbORsXg Yi7PUljAEJgoztFaYV8fN8yg4XsV95TkLJS32+QaGQZPl9tZT5O50ftRJLL1Pq8V9cjqEjHdyG8D rpdhkJmhq5MLTGX0QR2diLdnYQ/2vRq1wsRe6nUyDNq712XP0Wt/W53TO+mNoYGcXkwuMDll0eM2 TPRbnGnAvaaDSVj2bOA0GQY1j7Lm9AzVWGG+jIrwphlH3wXuzvpD51RONXZJ7aizLFcIyx4O3CXD IN527kUdJAJAWPbFqBXnVmHZV6FO3K+I6oahzgYPAX7T017UnMqoxgpTQAniONRJ/AeFZRc72+IA P47SPwEWAAjLbgL+jPJ1NAF/EZZd6o/sc6pINQSmARAyDL6OOm45mmSoX+cDVDiC6D0+azI0arcS FSkG9fcgORlTbcfdXtR5jqOdnpPGO3QK8nzU33KsoutvgXIyoBorjP7FN6OEsph3sE6rq9fS8RmQ RTIMTgP+QPJsbk5GVENgjgMQlv0QcDnwBp0nxgaQ/O+6dmCUsOxHUGdj459kbI/a3Sksew3qjE5L 1pOVUx2VtBJljxxAhf3v0v4TZRnKmI25ObruLdTZkvcAZBgcEpY9E3BRu6TrZBisznqycvJYUk6Z 5KGBnLLIBSanLHKBySmLXGByyiIXmJyy+D/P9uGVPOu6DAAAACh6VFh0U29mdHdhcmUAAHja801M LsrPTU3JTFRwyyxKLc8vyi5WsAAAYBUIJ4KDNosAAAAASUVORK5CYII= --_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_--

3 2

Unable to make Single Sign on working on Windows 7 Guest
by Felipe Herrera Martinez 11 Mar '19

11 Mar '19

On the case I'll be able to create an installer, what is the name of the Application need to be there, in order to ovirt detects that Ovirt Guest agent is installed? I have created an installer adding OvirtGuestService files and the Product Name to be shown, a part of the command line post installs.. I have tried with "ovirt-guest-agent" and "Ovirt guest agent" Names for the application installed on Windows 7 guest and even both are presented on ovirt VM Applications tab, on any case LogonVDScommand appears. There is other option to make it work now? Thanks in advance, Felipe

3 5

Re: [ovirt-users] Need VM run once api
by Chandrahasa S 11 Mar '19

11 Mar '19

This is a multipart message in MIME format. --=_alternative 00199D2865257E91_= Content-Type: text/plain; charset="US-ASCII" Can any one help on this. Thanks & Regards Chandrahasa S From: Chandrahasa S/MUM/TCS To: users(a)ovirt.org Date: 28-07-2015 15:20 Subject: Need VM run once api Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00199D2865257E91_= Content-Type: text/html; charset="US-ASCII" Can any one help on this. Thanks & Regards Chandrahasa S From:        Chandrahasa S/MUM/TCS To:        users(a)ovirt.org Date:        28-07-2015 15:20 Subject:        Need VM run once api <hr noshade> Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00199D2865257E91_=--

3 3

Re: [ovirt-users] Problem Windows guests start in pause
by Dafna Ron 11 Mar '19

11 Mar '19

Hi Lucas, Please send mails to the list next time. can you please do rpm -qa |grep qemu. also, can you try a different windows image? Thanks, Dafna On 07/14/2014 02:03 PM, lucas castro wrote: > On the host there I've tried to run the vm, I use a centOS 6.5 > and checked, no update for qemu, libvirt or related package. -- Dafna Ron

3 3

Feature: Hosted engine VM management
by Roy Golan 27 Feb '19

27 Feb '19

Hi all, Upcoming in 3.6 is enhancement for managing the hosted engine VM. In short, we want to: * Allow editing the Hosted engine VM, storage domain, disks, networks etc * Have a shared configuration for the hosted engine VM * Have a backup for the hosted engine VM configuration please review and comment on the wiki below: http://www.ovirt.org/Hosted_engine_VM_management Thanks, Roy

2 3

Re: [ovirt-users] Packet loss
by Doron Fediuck 26 Feb '19

26 Feb '19

----_com.android.email_640187878761650 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: base64 SGkgS3lsZSzCoApXZSBtYXkgaGF2ZSBzZWVuIHNvbWV0aGluZyBzaW1pbGFyIGluIHRoZSBwYXN0 IGJ1dCBJIHRoaW5rIHRoZXJlIHdlcmUgdmxhbnMgaW52b2x2ZWQuwqAKSXMgaXQgdGhlIHNhbWUg Zm9yIHlvdT/CoApUb255IC8gRGFuLCBkb2VzIGl0IHJpbmcgYSBiZWxsP8Kg ----_com.android.email_640187878761650 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: base64 PGh0bWw+PGhlYWQ+PG1ldGEgaHR0cC1lcXVpdj0iQ29udGVudC1UeXBlIiBjb250ZW50PSJ0ZXh0 L2h0bWw7IGNoYXJzZXQ9VVRGLTgiPjwvaGVhZD48Ym9keSA+PGRpdj5IaSBLeWxlLCZuYnNwOzwv ZGl2PjxkaXY+V2UgbWF5IGhhdmUgc2VlbiBzb21ldGhpbmcgc2ltaWxhciBpbiB0aGUgcGFzdCBi dXQgSSB0aGluayB0aGVyZSB3ZXJlIHZsYW5zIGludm9sdmVkLiZuYnNwOzwvZGl2PjxkaXY+SXMg aXQgdGhlIHNhbWUgZm9yIHlvdT8mbmJzcDs8L2Rpdj48ZGl2PlRvbnkgLyBEYW4sIGRvZXMgaXQg cmluZyBhIGJlbGw/Jm5ic3A7PC9kaXY+PC9ib2R5PjwvaHRtbD4= ----_com.android.email_640187878761650--

2 1

Changing gateway ping address
by Matteo 21 Mar '17

21 Mar '17

Hi all, I need to change the gateway ping address, the one used by hosted engine setup. Is ok to edit /etc/ovirt-hosted-engine/hosted-engine.conf on each node, update the gateway param with the new ip address and restart the agent&broker on each node? With a blind test seems ok, but need to understand if is the right procedure. Thanks, Matteo

4 7

oVirt-shell command to move a disk
by Nicolas Ecarnot 16 Aug '16

16 Aug '16

Hello, I'm confused because though I'm using ovirt-shell to script many actions every day, and even after a large bunch of reading and testing, I can not find the correct syntax to move (offline/available) disks between storage domains. May you help me please? (oVirt 3.4.4) -- Nicolas Ecarnot

4 10

3.6 upgrade issue
by Jon Archer 01 May '16

01 May '16

Hi all, Wonder if anyone can shed any light on an error i'm seeing while running engine-setup. If just upgraded the packages to the latest 3.6 ones today (from 3.5), run engine-setup, answered the questions, confirming install then get presented with: [ INFO ] Cleaning async tasks and compensations [ INFO ] Unlocking existing entities [ INFO ] Checking the Engine database consistency [ INFO ] Stage: Transaction setup [ INFO ] Stopping engine service [ INFO ] Stopping ovirt-fence-kdump-listener service [ INFO ] Stopping websocket-proxy service [ INFO ] Stage: Misc configuration [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ ERROR ] Failed to execute stage 'Misc configuration': function getdwhhistorytimekeepingbyvarname(unknown) does not exist LINE 2: select * from GetDwhHistoryTimekeepingByVarName( ^ HINT: No function matches the given name and argument types. You might need to add explicit type casts. [ INFO ] Yum Performing yum transaction rollback [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20150929144137-7u5rhg.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20150929144215-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed Any ideas, where to look to fix things? Thanks Jon

5 4

MAC spoofing for specific VMs
by Christopher Young 13 Mar '16

13 Mar '16

I'm working on some load-balancing solutions and they appear to require MAC spoofing. I did some searching and reading and as I understand it, you can disable the MAC spoofing protection through a few methods. I was wondering about the best manner to enable this for the VMs that require it and not across the board (if that is even possible). I'd like to just allow my load-balancer VMs to do what they need to, but keep the others untouched as a security mechanism. If anyone has any advice on the best method to handle this scenario, I would greatly appreciate it. It seems that this might turn into some type of feature request, though I'm not sure if this is something that has to be done at the Linux bridge level, the port level, or the VM level. Any explanations into that would also help in my education. Thanks, Chris

3 5

python floppy in RunOnce mode
by Giulio Casella 07 Jan '16

07 Jan '16

Hi, I'm trying to boot a vm with non persistent floppy using python ovirt sdk (the "RunOnce" way in administrator portal), but guest OS can't see floppy drive. The ultimate goal is to deploy floppy with sysprep unattend.xml file for windows 7 pools of vm. Here is a snippet of code I use: ------------------------------------------------- myvm = api.vms.get(name="vmname") content="This is file content!" f=params.File(name="foobar.txt",content=content) fs=params.Files() fs.add_file(f) payload=params.Payload() payload.set_type("floppy") payload.set_files(fs) payloads=params.Payloads() payloads.add_payload(payload) thevm=params.VM() thevm.set_payloads(payloads) action=params.Action(vm=thevm) myvm.start(action=action) xml = ParseHelper.toXml(action) print xml ------------------------------------------------- As you can see, for debugging purpose, I print my xml action, and I get: ------------------------------------------------- <action> <vm> <payloads> <payload type="floppy"> <files> <file> <name>foobar.txt</name> <content>This is file content</content> </file> </files> </payload> </payloads> </vm> </action> ------------------------------------------------- in the admin portal I can see my vm in "RunOnce" state, but no floppy is present... In fact in the vm process command line (ps -ef | grep qemu-kvm | grep vmname) I can't see -drive option referring to floppy (I only see 2 "-drive" options, referring to vm system disk and to a correctly mounted cdrom ISO) What I'm doing wrong? (The engine is RHEV-M version 3.4.1-0.31.el6ev) Thanks in advance, Giulio

3 11

Re: [ovirt-users] Error during hosted-engine-setup for 3.5.1 on F20 (Cannot add the host to cluster ... SSH has failed)
by Bob Doolittle 18 Dec '15

18 Dec '15

On 03/09/2015 07:12 AM, Simone Tiraboschi wrote: > > ----- Original Message ----- >> From: "Bob Doolittle" <bob(a)doolittle.us.com> >> To: "Simone Tiraboschi" <stirabos(a)redhat.com> >> Sent: Monday, March 9, 2015 12:02:49 PM >> Subject: Re: [ovirt-users] Error during hosted-engine-setup for 3.5.1 on F20 (Cannot add the host to cluster ... SSH >> has failed) >> >> On Mar 9, 2015 5:23 AM, "Simone Tiraboschi" <stirabos(a)redhat.com> wrote: >>> >>> >>> ----- Original Message ----- >>>> From: "Bob Doolittle" <bob(a)doolittle.us.com> >>>> To: "users-ovirt" <users(a)ovirt.org> >>>> Sent: Friday, March 6, 2015 9:21:20 PM >>>> Subject: [ovirt-users] Error during hosted-engine-setup for 3.5.1 on >> F20 (Cannot add the host to cluster ... SSH has >>>> failed) >>>> >>>> Hi, >>>> >>>> I'm following the instructions here: >> http://www.ovirt.org/Hosted_Engine_Howto >>>> My self-hosted install failed near the end: >>>> >>>> To continue make a selection from the options below: >>>> (1) Continue setup - engine installation is complete >>>> (2) Power off and restart the VM >>>> (3) Abort setup >>>> (4) Destroy VM and abort setup >>>> >>>> (1, 2, 3, 4)[1]: 1 >>>> [ INFO ] Engine replied: DB Up!Welcome to Health Status! >>>> Enter the name of the cluster to which you want to add the >> host >>>> (Default) [Default]: >>>> [ ERROR ] Cannot automatically add the host to cluster Default: Cannot >> add >>>> Host. Connecting to host via SSH has failed, verify that the host is >>>> reachable (IP address, routable address etc.) You may refer to the >>>> engine.log file for further details. >>>> [ ERROR ] Failed to execute stage 'Closing up': Cannot add the host to >>>> cluster Default >>>> [ INFO ] Stage: Clean up >>>> [ INFO ] Generating answer file >>>> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20150306135624.conf' >>>> [ INFO ] Stage: Pre-termination >>>> [ INFO ] Stage: Termination >>>> >>>> I can ssh into the engine VM both locally and remotely. There is no >>>> /root/.ssh directory, however. Did I need to set that up somehow? >>> It's the engine that needs to open an SSH connection to the host calling >> it by its hostname. >>> So please be sure that you can SSH to the host from the engine using its >> hostname and not its IP address. >> >> I'm assuming this should be a password-less login (key-based >> authentication?). > Yes, it is. > >> As what user? > root OK, I see a couple of problems. First off, I didn't have my deploying-host hostname in the hosts map for my engine. After adding it to /etc/hosts (both hostname and FQDN), when I try to ssh from root@engine to root@host it is prompting me for a password. On my engine, ~root/.ssh does not contain any keys. On my host, ~root/.ssh has authorized_keys, and in it there is a key with the comment "ovirt-engine". It's possible that I inadvertently removed ~root/.ssh on engine while I was preparing the engine (I started to set up my own no-password logins and then thought better and cleaned up, not realizing that some prior setup affecting that directory had occurred). That would explain the second issue. How/when does the key for root@engine get populated to the host's ~root/.ssh/authenticated_keys during setup? -Bob > >> -Bob >> >>> Till hosted-engine hosts were simply identified by their IP address but >> than we had some bug report on side effects of that. >>> So now we generate and sign certs using host hostnames and so the engine >> should be able to correctly resolve them. >>>> When I log into the Administration portal, the engine VM does not appear >>>> under the Virtual machine view (it's empty). >>> It's cause the setup didn't complete. >>> >>>> I've attached what I think are the relevant logs. >>>> >>>> Also, when my host reboots, the ovirt-ha-broker and ovirt-ha-agent >> services >>>> do not come up automatically. I have to use systemctl to start them >>>> manually. >>> It's cause the setup didn't complete. >>> >>>> This is a fresh Fedora 20 machine installing a fresh copy of Ovirt >> 3.5.1. >>>> What's the cleanest approach to restore/complete sanity of my setup >> please? >>> First step is to clarify what went wrong in order to avoid it in the >> future. >>> Than, if you want a really sanity environment for production use I'd >> suggest to redeploy. >>> So >>> hosted-engine --vm-poweroff >>> empty the storage domain share and deploy again >>> >>>> Thanks, >>>> Bob >>>> >>>> >>>> I've linked 3 files to this email: >>>> server.log (12.4 MB) Dropbox https://db.tt/g5p09AaD >>>> vdsm.log (3.2 MB) Dropbox https://db.tt/P4572SUm >>>> ovirt-hosted-engine-setup-20150306123622-tad1fy.log (413 KB) Dropbox >>>> https://db.tt/XAM9ffhi >>>> Mozilla Thunderbird makes it easy to share large files over email. >>>> >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users(a)ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>>

4 17

Issue with kernel 2.6.32-573.3.1.el6.x86_64?
by Michael Kleinpaste 30 Nov '15

30 Nov '15

So I patched my vhosts and updated the kernel to 2.6.32-573.3.1.el6.x86_64. Afterwards the networking became unstable for my vyatta firewall vm. Lots of packet loss and out of order packets (based on my tshark at the time). Has anybody else experienced this? -- *Michael Kleinpaste* Senior Systems Administrator SharperLending, LLC. www.SharperLending.com Michael.Kleinpaste(a)SharperLending.com (509) 324-1230 Fax: (509) 324-1234

4 7

[RFI] oVirt 3.6 Planning
by s k 12 Nov '15

12 Nov '15

--_3cd0d8bb-5691-4f6b-93af-78e05dc9fe1a_ Content-Type: text/plain; charset="iso-8859-7" Content-Transfer-Encoding: quoted-printable On 12/09/14 09:22=2C Itamar Heim wrote:=0A= > With oVirt 3.5 nearing GA=2C time to ask for "what do you want to see in = =0A= > oVirt 3.6"?=0A= >=0A= > Thanks=2C=0A= > Itamar=0A= > _______________________________________________=0A= > Users mailing list=0A= > Users at ovirt.org=0A= > http://lists.ovirt.org/mailman/listinfo/users=0A= >=0A= > Performance metric similar to what VMware calls "CPU Ready" would be very u= seful if it was available in the VM details in the admin portal.=20 It would provide great visibility on VM's performance in an environment wit= h CPU overallocation. = --_3cd0d8bb-5691-4f6b-93af-78e05dc9fe1a_ Content-Type: text/html; charset="iso-8859-7" Content-Transfer-Encoding: quoted-printable <html> <head> <style></style></head> <body class=3D'hmmessage'><div dir=3D'ltr'><pre style=3D"white-space: pre-w= rap=3B">On 12/09/14 09:22=2C Itamar Heim wrote:=0A= &gt=3B With oVirt 3.5 nearing GA=2C time to ask for "what do you want to= see in =0A= &gt=3B oVirt 3.6"?=0A= &gt=3B=0A= &gt=3B Thanks=2C=0A= &gt=3B Itamar=0A= &gt=3B _______________________________________________=0A= &gt=3B Users mailing list=0A= &gt=3B <a href=3D"http://lists.ovirt.org/mailman/listinfo/users">Use= rs at ovirt.org</a>=0A= &gt=3B <a href=3D"http://lists.ovirt.org/mailman/listinfo/users">htt= p://lists.ovirt.org/mailman/listinfo/users</a>=0A= &gt=3B=0A= &gt=3B</pre><pre style=3D"white-space: pre-wrap=3B"> </pre><pre styl= e=3D"white-space: pre-wrap=3B">Performance metric similar to what VMware ca= lls "CPU Ready" would be very useful if it was available in the VM details = in the admin portal.&nbsp=3B</pre><pre style=3D"white-space: pre-wrap=3B"><= br></pre><pre style=3D"white-space: pre-wrap=3B">It would provide great vis= ibility on VM's performance in an environment with CPU overallocation.</pre= ><pre style=3D"white-space: pre-wrap=3B"> </pre> </div></body= > </html>= --_3cd0d8bb-5691-4f6b-93af-78e05dc9fe1a_--

3 3

Re: [ovirt-users] [RFI] oVirt 3.6 Planning
by Juan Pablo Lorier 07 Nov '15

07 Nov '15

+1 to iso upload from gui +1 to ceph support (if the way is via Cynder, then integrate Cynder in Ovirt as you did with neutron to get arround the lack of features in networking) I've been asking for several things (with their respective RFEs) and as versions go by without success, I'm asking again: - 1049994 [RFE] Allow choosing network interface for gluster domain traffic - 1049476 [RFE] Mix untagged and tagged Logical Networks on the same NIC - 1029489 [RFE] Export not exporting direct lun disk - 1051002 [RFE] ISO domain should be a simple NFS share containing ISOs

4 4

[RFI] oVirt 3.6 Planning
by Itamar Heim 05 Nov '15

05 Nov '15

With oVirt 3.5 nearing GA, time to ask for "what do you want to see in oVirt 3.6"? Thanks, Itamar

29 92

Can´t use a VM Network VLAN, because the Virtual Machines inside can't reach the Gateway
by Julián Tete 22 Oct '15

22 Oct '15

Hi Friends of oVirt I'm trying to migrate my company from VMware to oVirt. In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs) The Virtual Machines in these VLANs, can be reached from the external IPs from the net range, but from the Virtual machines only can ping the Host with the Bridge and itself, can't reach the gateway. ¿? I configured a IP Forwarding in the Host with the virtual machine, and nothing changes... Any idea ? This is the last duty before embrace oVirt in the company. Look to the VLAN 100 configuration (My desired VM Network): http://postimg.org/image/7hrog0a2n/ http://postimg.org/image/68b40i1vr/ http://postimg.org/image/lu6mlshgp/ http://postimg.org/image/540o1qc0t/ http://postimg.org/image/4kyg787bt/ http://postimg.org/image/v7ralh7zb/ http://postimg.org/image/kn903cl03/ For any idea, thanks in advance

6 12

Backup storage domain for the meta data ONLY?
by Nicolas Ecarnot 21 Oct '15

21 Oct '15

Hi, In a lab, I have an oVirt test datacenter using a very old SAN (iSCSI setup). There are very few VM on it, and none of them are in critical. Some risky maintenance is to be planned on the SAN, and the risk is to lose it all. To be honnest, to lose these VMs is bearable, but to lose the setup would be painful (quite long to set everything back up). This is not an hosted setup, so I guess most of the config lies in the manager, and this part will stay untouched. My question : Is there any benefit to add an small additionnal temporary storage domain where (some unknown by me) meta datas could be duplicated (knowing that I have not enough room to export the VM)? What additionnal setup would be saved this way? -- Nicolas ECARNOT

2 1

oVirt 3.5.4.2-1 - Snapshot Failure
by Christian Rebel 21 Oct '15

21 Oct '15

This is a multipart message in MIME format. ------=_NextPart_000_0561_01D0F200.88CF1960 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Dear all, =20 I upgraded to 3.5.4.2-1.el7.centos, but I have still the Problem that I can=B4t create a snapshot! Below some parts of the vdsm logs, does anyone have an idea to fix it, please help... =20 ### =20 167fb52d-0a51-4fea-9517-c668933ef4e2::ERROR::2015-09-18 09:33:33,957::task::866::Storage.TaskManager.Task::(_setError) Task=3D`167fb52d-0a51-4fea-9517-c668933ef4e2`::Unexpected error efb2447e-db4c-4dbd-84e4-5f8039949000::ERROR::2015-09-18 09:33:34,433::task::866::Storage.TaskManager.Task::(_setError) Task=3D`efb2447e-db4c-4dbd-84e4-5f8039949000`::Unexpected error 167fb52d-0a51-4fea-9517-c668933ef4e2::ERROR::2015-09-18 09:33:34,802::task::866::Storage.TaskManager.Task::(_setError) Task=3D`167fb52d-0a51-4fea-9517-c668933ef4e2`::Unexpected error efb2447e-db4c-4dbd-84e4-5f8039949000::ERROR::2015-09-18 09:33:34,987::task::866::Storage.TaskManager.Task::(_setError) Task=3D`efb2447e-db4c-4dbd-84e4-5f8039949000`::Unexpected error =20 VolumeDoesNotExist: Volume does not exist: ('36fd2e26-31a3-4284-8193-abd11c01a0f4',) VolumeDoesNotExist: Volume does not exist: ('786e719d-7f54-4501-9e8d-688c1e482309',) =20 167fb52d-0a51-4fea-9517-c668933ef4e2::ERROR::2015-09-18 09:33:32,883::volume::264::Storage.Volume::(clone) cannot clone image 6281b597-020d-4ea7-a954-bb798a0ca4f1 volume 2a2015a1-f62c-4e32-8b04-77ece2ba4cc1 to /rhev/data-center/00000002-0002-0002-0002-000000000021/937822d9-8a59-490f= -95 b7-48371ae32253/images/6281b597-020d-4ea7-a954-bb798a0ca4f1/4e522ef0-279f= -4c 02-b581-c233d666eee1 efb2447e-db4c-4dbd-84e4-5f8039949000::ERROR::2015-09-18 09:33:34,375::volume::264::Storage.Volume::(clone) cannot clone image e7e99288-ad83-406e-9cb6-7a5aa443de9b volume c5762dec-d9d1-4842-84d1-05896d4d27fb to /rhev/data-center/00000002-0002-0002-0002-000000000021/937822d9-8a59-490f= -95 b7-48371ae32253/images/e7e99288-ad83-406e-9cb6-7a5aa443de9b/c60aa316-a16a= -41 3e-81f3-e24858c3c7a7 =20 CannotCloneVolume: Cannot clone volume: u"src=3D/rhev/data-center/00000002-0002-0002-0002-000000000021/937822d9-8= a59-4 90f-95b7-48371ae32253/images/6281b597-020d-4ea7-a954-bb798a0ca4f1/2a2015a= 1-f 62c-4e32-8b04-77ece2ba4cc1, dst=3D/rhev/data-center/00000002-0002-0002-0002-000000000021/937822d9-8a5= 9-490 f-95b7-48371ae32253/images/6281b597-020d-4ea7-a954-bb798a0ca4f1/4e522ef0-= 279 f-4c02-b581-c233d666eee1: Volume does not exist: ('36fd2e26-31a3-4284-8193-abd11c01a0f4',)" CannotCloneVolume: Cannot clone volume: u"src=3D/rhev/data-center/00000002-0002-0002-0002-000000000021/937822d9-8= a59-4 90f-95b7-48371ae32253/images/e7e99288-ad83-406e-9cb6-7a5aa443de9b/c5762de= c-d 9d1-4842-84d1-05896d4d27fb, dst=3D/rhev/data-center/00000002-0002-0002-0002-000000000021/937822d9-8a5= 9-490 f-95b7-48371ae32253/images/e7e99288-ad83-406e-9cb6-7a5aa443de9b/c60aa316-= a16 a-413e-81f3-e24858c3c7a7: Volume does not exist: ('786e719d-7f54-4501-9e8d-688c1e482309',)" =20 VolumeCreationError: Error creating a new volume: (u'Volume creation 4e522ef0-279f-4c02-b581-c233d666eee1 failed: Cannot clone volume: u"src=3D/rhev/data-center/00000002-0002-0002-0002-000000000021/937822d9-8= a59-4 90f-95b7-48371ae32253/images/6281b597-020d-4ea7-a954-bb798a0ca4f1/2a2015a= 1-f 62c-4e32-8b04-77ece2ba4cc1, dst=3D/rhev/data-center/00000002-0002-0002-0002-000000000021/937822d9-8a5= 9-490 f-95b7-48371ae32253/images/6281b597-020d-4ea7-a954-bb798a0ca4f1/4e522ef0-= 279 f-4c02-b581-c233d666eee1: Volume does not exist: (\'36fd2e26-31a3-4284-8193-abd11c01a0f4\',)"',) VolumeCreationError: Error creating a new volume: (u'Volume creation c60aa316-a16a-413e-81f3-e24858c3c7a7 failed: Cannot clone volume: u"src=3D/rhev/data-center/00000002-0002-0002-0002-000000000021/937822d9-8= a59-4 90f-95b7-48371ae32253/images/e7e99288-ad83-406e-9cb6-7a5aa443de9b/c5762de= c-d 9d1-4842-84d1-05896d4d27fb, dst=3D/rhev/data-center/00000002-0002-0002-0002-000000000021/937822d9-8a5= 9-490 f-95b7-48371ae32253/images/e7e99288-ad83-406e-9cb6-7a5aa443de9b/c60aa316-= a16 a-413e-81f3-e24858c3c7a7: Volume does not exist: (\'786e719d-7f54-4501-9e8d-688c1e482309\',)"',) =20 167fb52d-0a51-4fea-9517-c668933ef4e2::DEBUG::2015-09-18 09:33:33,959::task::919::Storage.TaskManager.Task::(_runJobs) Task=3D`167fb52d-0a51-4fea-9517-c668933ef4e2`::aborting: Task is = aborted: 'Error creating a new volume' - code 205 efb2447e-db4c-4dbd-84e4-5f8039949000::DEBUG::2015-09-18 09:33:34,440::task::919::Storage.TaskManager.Task::(_runJobs) Task=3D`efb2447e-db4c-4dbd-84e4-5f8039949000`::aborting: Task is = aborted: 'Error creating a new volume' - code 205 ------=_NextPart_000_0561_01D0F200.88CF1960 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Diso-8859-1"> <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta name=3DGenerator = content=3D"Microsoft Word 14 (filtered medium)"><style></style></head><body lang=3DDE-AT link=3Dblue = vlink=3Dpurple><div class=3DWordSection1>Dear all,<o:p></o:p><o:p> </o:p>I upgraded = to 3.5.4.2-1.el7.centos, but I have still the Problem that I can=B4t = create=A0 a snapshot!<o:p></o:p>Below some parts of the vdsm logs, = does anyone have an idea to fix it, please = help...<o:p></o:p><o:p> </o:p>###<o:p></o:p><o:p> </o:p>167fb52d-0a51-4fea-9517-c668933ef4e2::ERROR::2015= -09-18 09:33:33,957::task::866::Storage.TaskManager.Task::(_setError) = Task=3D`167fb52d-0a51-4fea-9517-c668933ef4e2`::Unexpected = error<o:p></o:p>efb2447e-db4c-4dbd-84e4-5f8039949000::ERROR::2015= -09-18 09:33:34,433::task::866::Storage.TaskManager.Task::(_setError) = Task=3D`efb2447e-db4c-4dbd-84e4-5f8039949000`::Unexpected = error<o:p></o:p>167fb52d-0a51-4fea-9517-c668933ef4e2::ERROR::2015= -09-18 09:33:34,802::task::866::Storage.TaskManager.Task::(_setError) = Task=3D`167fb52d-0a51-4fea-9517-c668933ef4e2`::Unexpected = error<o:p></o:p>efb2447e-db4c-4dbd-84e4-5f8039949000::ERROR::2015= -09-18 09:33:34,987::task::866::Storage.TaskManager.Task::(_setError) = Task=3D`efb2447e-db4c-4dbd-84e4-5f8039949000`::Unexpected = error<o:p></o:p><o:p> </o:p>VolumeDoesNotExist: Volume does not exist: = ('36fd2e26-31a3-4284-8193-abd11c01a0f4',)<o:p></o:p>VolumeDoesNotExist: Volume does not exist: = ('786e719d-7f54-4501-9e8d-688c1e482309',)<o:p></o:p><o:p> </o:p>167fb52d-0a51-4fea-9517-c668933ef4e2::ERROR::2015= -09-18 09:33:32,883::volume::264::Storage.Volume::(clone) cannot clone = image 6281b597-020d-4ea7-a954-bb798a0ca4f1 volume = 2a2015a1-f62c-4e32-8b04-77ece2ba4cc1 to = /rhev/data-center/00000002-0002-0002-0002-000000000021/937822d9-8a59-490f= -95b7-48371ae32253/images/6281b597-020d-4ea7-a954-bb798a0ca4f1/4e522ef0-2= 79f-4c02-b581-c233d666eee1<o:p></o:p>efb2447e-db4c-4dbd-84e4-5f8039949000::ERROR::2015= -09-18 09:33:34,375::volume::264::Storage.Volume::(clone) cannot clone = image e7e99288-ad83-406e-9cb6-7a5aa443de9b volume = c5762dec-d9d1-4842-84d1-05896d4d27fb to = /rhev/data-center/00000002-0002-0002-0002-000000000021/937822d9-8a59-490f= -95b7-48371ae32253/images/e7e99288-ad83-406e-9cb6-7a5aa443de9b/c60aa316-a= 16a-413e-81f3-e24858c3c7a7<o:p></o:p><o:p> </o:p>CannotCloneVolume: Cannot clone volume: = u"src=3D/rhev/data-center/00000002-0002-0002-0002-000000000021/93782= 2d9-8a59-490f-95b7-48371ae32253/images/6281b597-020d-4ea7-a954-bb798a0ca4= f1/2a2015a1-f62c-4e32-8b04-77ece2ba4cc1, = dst=3D/rhev/data-center/00000002-0002-0002-0002-000000000021/937822d9-8a5= 9-490f-95b7-48371ae32253/images/6281b597-020d-4ea7-a954-bb798a0ca4f1/4e52= 2ef0-279f-4c02-b581-c233d666eee1: Volume does not exist: = ('36fd2e26-31a3-4284-8193-abd11c01a0f4',)"<o:p></o:p>CannotCloneVolume: Cannot clone volume: = u"src=3D/rhev/data-center/00000002-0002-0002-0002-000000000021/93782= 2d9-8a59-490f-95b7-48371ae32253/images/e7e99288-ad83-406e-9cb6-7a5aa443de= 9b/c5762dec-d9d1-4842-84d1-05896d4d27fb, = dst=3D/rhev/data-center/00000002-0002-0002-0002-000000000021/937822d9-8a5= 9-490f-95b7-48371ae32253/images/e7e99288-ad83-406e-9cb6-7a5aa443de9b/c60a= a316-a16a-413e-81f3-e24858c3c7a7: Volume does not exist: = ('786e719d-7f54-4501-9e8d-688c1e482309',)"<o:p></o:p><o:p> </o:p>VolumeCreationError: Error creating a new = volume: (u'Volume creation 4e522ef0-279f-4c02-b581-c233d666eee1 failed: = Cannot clone volume: = u"src=3D/rhev/data-center/00000002-0002-0002-0002-000000000021/93782= 2d9-8a59-490f-95b7-48371ae32253/images/6281b597-020d-4ea7-a954-bb798a0ca4= f1/2a2015a1-f62c-4e32-8b04-77ece2ba4cc1, = dst=3D/rhev/data-center/00000002-0002-0002-0002-000000000021/937822d9-8a5= 9-490f-95b7-48371ae32253/images/6281b597-020d-4ea7-a954-bb798a0ca4f1/4e52= 2ef0-279f-4c02-b581-c233d666eee1: Volume does not exist: = (\'36fd2e26-31a3-4284-8193-abd11c01a0f4\',)"',)<o:p></o:p></p= >VolumeCreationError: Error creating a new = volume: (u'Volume creation c60aa316-a16a-413e-81f3-e24858c3c7a7 failed: = Cannot clone volume: = u"src=3D/rhev/data-center/00000002-0002-0002-0002-000000000021/93782= 2d9-8a59-490f-95b7-48371ae32253/images/e7e99288-ad83-406e-9cb6-7a5aa443de= 9b/c5762dec-d9d1-4842-84d1-05896d4d27fb, = dst=3D/rhev/data-center/00000002-0002-0002-0002-000000000021/937822d9-8a5= 9-490f-95b7-48371ae32253/images/e7e99288-ad83-406e-9cb6-7a5aa443de9b/c60a= a316-a16a-413e-81f3-e24858c3c7a7: Volume does not exist: = (\'786e719d-7f54-4501-9e8d-688c1e482309\',)"',)<o:p></o:p></p= ><o:p> </o:p>167fb52d-0a51-4fea-9517-c668933ef4e2::DEBUG::2015= -09-18 09:33:33,959::task::919::Storage.TaskManager.Task::(_runJobs) = Task=3D`167fb52d-0a51-4fea-9517-c668933ef4e2`::aborting: Task is = aborted: 'Error creating a new volume' - code = 205<o:p></o:p>efb2447e-db4c-4dbd-84e4-5f8039949000::DEBUG::2015= -09-18 09:33:34,440::task::919::Storage.TaskManager.Task::(_runJobs) = Task=3D`efb2447e-db4c-4dbd-84e4-5f8039949000`::aborting: Task is = aborted: 'Error creating a new volume' - code = 205<o:p></o:p></div></body></html> ------=_NextPart_000_0561_01D0F200.88CF1960--

3 3

required info
by Budur Nagaraju 21 Oct '15

21 Oct '15

HI Need some info on how to re register the vms on the new Engine ? if the old Engine got corrupted. Thanks, Nagaraju

2 1

about LXC and ovirt
by Nathanaël Blanchet 20 Oct '15

20 Oct '15

This is a multi-part message in MIME format. --------------020605060407070503090903 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Hi all, now rhel7 is out, it will become a part of the ovirt project in a near future. Given taht official LXC support aims to complete the KVM virtualization part, is LXC planned to be supported for linux VM by ovirt, like openvz is with proxmox? -- Nathanaël Blanchet Supervision réseau Pôle exploitation et maintenance Département des systèmes d'information 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr --------------020605060407070503090903 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hi all, now rhel7 is out, it will become a part of the ovirt project in a near future. Given taht official LXC support aims to complete the KVM virtualization part, is LXC planned to  be supported for linux VM by ovirt, like openvz is with proxmox? <pre class="moz-signature" cols="72">-- Nathanaël Blanchet Supervision réseau Pôle exploitation et maintenance Département des systèmes d'information 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 <a class="moz-txt-link-abbreviated" href="mailto:blanchet@abes.fr">blanchet(a)abes.fr</a> </pre> </body> </html> --------------020605060407070503090903--

6 5

vm cannot be started
by qinglong.dong＠horebdata.cn 13 Oct '15

13 Oct '15

This is a multi-part message in MIME format. ------=_001_NextPart743821046535_=---- Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: base64 SGkgYWxsLA0KICAgICAgICBJIGhhdmUgaW5zdGFsbGVkIG92aXJ0LWhvc3RlZC1lbmdpbmUtc2V0 dXAgb24gb25lIG1hY2hpbmUgYW5kIGl0IHVzZWQgaXNjc2kgc2hhcmVkIHN0b3JhZ2Ugb24gYW5v dGhlciBtYWNoaW5lLiBJIGNyZWF0ZWQgYW5kIHNlYWxlZCBhIHdpbmRvd3MgeHAgdGVtcGxhdGUg YW5kIHRoZW4gSSBjcmVhdGVkIGEgdm0gYmFzZWQgb24gdGhlIHRlbXBsYXRlLiBXaGVuIHRoZSB2 bSB3YXMgc3RhcnRlZCBhdCB0aGUgZmlyc3QgdGltZSBJIGF0dGFjaGVkIHRoZSBmbG9wcHkgdG8g aXQgYW5kIHVzZSBzeXNwcmVwIHRvIGluaXQgaXQuIFRoZW4gSSBzaHV0ZG93biB0aGUgdm0sIGJ1 dCBhZnRlciBJIHNodXRkb3duIGl0IEkgY2Fubm90IHN0YXJ0IGl0LiBIZXJlIGFyZSB0aGUgbG9n czoNCiAgICAgICAgVk0gdGVzdCBpcyBkb3duIHdpdGggZXJyb3IuIEV4aXQgbWVzc2FnZTogaW50 ZXJuYWwgZXJyb3IgUHJvY2VzcyBleGl0ZWQgd2hpbGUgcmVhZGluZyBjb25zb2xlIGxvZyBvdXRw dXQ6IGNoYXIgZGV2aWNlIHJlZGlyZWN0ZWQgdG8gL2Rldi9wdHMvMQ0KMjAxNS0wOS0yNVQwMToy OTozMS4yMjIwMjhaIHFlbXUta3ZtOiAtZHJpdmUgZmlsZT0vdmFyL3J1bi92ZHNtL3BheWxvYWQv NmJlNzI2NjQtYTgwYy00ZDc4LTlhNWItZjJiYmUzN2M1YjJlLjRlYmYyNGMzM2Y2MTExZTBkYWUy MDQ2NmYzNzBkZTUzLmltZyxpZj1ub25lLGlkPWRyaXZlLWZkYzAtMC0wLGZvcm1hdD1yYXcsc2Vy aWFsPTogY291bGQgbm90IG9wZW4gZGlzayBpbWFnZSAvdmFyL3J1bi92ZHNtL3BheWxvYWQvNmJl NzI2NjQtYTgwYy00ZDc4LTlhNWItZjJiYmUzN2M1YjJlLjRlYmYyNGMzM2Y2MTExZTBkYWUyMDQ2 NmYzNzBkZTUzLmltZzogUGVybWlzc2lvbiBkZW5pZWQuDQogICAgICAgIEFueW9uZSBjYW4gaGVs cD8gVGhhbmtzIQ0KDQoNCkRvbG55DQo= ------=_001_NextPart743821046535_=---- Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html><head><meta http-equiv=3D"content-type" content=3D"text/html; charse= t=3Dus-ascii"><style>body { line-height: 1.5; }body { font-size: 10.5pt; f= ont-family: ????; color: rgb(0, 0, 0); line-height: 1.5; }</style></head><= body>=0A<div>Hi all,</div><div><span style=3D"font-family: "" helvetica= =3D"" neue',=3D"" arial,=3D"" sans-serif";=3D"" font-size:=3D"" 15px;=3D""= color:=3D"" rgb(34,=3D"" 34,=3D"" 34);=3D"" background-color:=3D"" rgb(19= 9,=3D"" 237,=3D"" 204);=3D"" font-weight:=3D"" normal;=3D"" font-style:=3D= "" normal;text-decoration:=3D"" none;'=3D"">    <spa= n style=3D"font-size: 10.5pt; line-height: 1.5; background-color: window;"= >    I have installed ovirt-hosted-engine-setup on one machine a= nd it used iscsi shared storage on another machine. I created and sealed a= windows xp template and then I created a vm based on the template. When t= he vm was started at the first time I attached the floppy to it and use sy= sprep to init it. Then I shutdown the vm, but after I shutdown it I cannot= start it. Here are the logs:</div><div>    &nb= sp;   VM test is down with = error. Exit message: internal error Process = exited while reading console log output: cha= r device redirected to /dev/pts/1</div>2015-09-= 25T01:29:31.222028Z qemu-kvm: -drive file=3D/var/run/vdsm/p= ayload/6be72664-a80c-4d78-9a5b-f2bbe37c5b2e.4ebf24c33f6111e0dae20466f370de= 53.img,if=3Dnone,id=3Ddrive-fdc0-0-0,format=3Draw,serial=3D: could&nb= sp;not open disk image /var/run/vdsm/payload/6be72664-= a80c-4d78-9a5b-f2bbe37c5b2e.4ebf24c33f6111e0dae20466f370de53.img: Per= mission denied.<div>        Anyone can help? Than= ks! <hr style=3D"width: 210px; height: 1px;" color=3D"#b5c4df" size=3D"= 1" align=3D"left">=0A<div>Dolny</div>=0A</div></body></html> ------=_001_NextPart743821046535_=------

2 1

Support for QinQ
by Sigbjorn Lie 07 Oct '15

07 Oct '15

Hi list, I've been looking around the web for QinQ support in Ovirt. I see that QinQ is supported in CentOS 6.x and above. However I cannot see any documented support in Ovirt. I've come across the page below which details QinQ as a future feature. Is QinQ still a future feature, or is it possible to use QinQ with Ovirt today somehow? http://www.ovirt.org/Networking Regards, Siggi

3 3

MAC address recycling
by Daniel Helgenberger 06 Oct '15

06 Oct '15

Hello, I recently experienced an issue with mac address uses in ovirt with foreman[1]. Bottom line, a mac address was recycled causing an issue where I could not rebuild a host because of a stale DHCP reservation record. What is the current behavior regarding the reuse of MAC addresses for new VMs? Can I somehow delay a the recycle of a MAC? Thanks! -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de www.monkeymen.tv Geschäftsführer: Martin Retschitzegger / Michaela Göllner Handeslregister: Amtsgericht Charlottenburg / HRB 112767

3 5

moving storage and importing vms issue
by Jiří Sléžka 06 Oct '15

06 Oct '15

This is a cryptographically signed message in MIME format. --------------ms070407060502090709050400 Content-Type: multipart/mixed; boundary="------------080609050703070305060003" This is a multi-part message in MIME format. --------------080609050703070305060003 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: quoted-printable Hello, I am working on some consolidation of our RHEV/oVirt servers and I moved = one storage to new oVirt datacenter (put it into maintenance, detached=20 it from old and imported into new datacenter) which worked pretty good. Then I tried to import all the vms which worked also great except for=20 three of them. These vms are stucked in VM Import sub-tab and are quietly failing=20 import attempts (I can only see failed task "Importing VM clavius-winxp=20 from configuration to Cluster CIT-oVirt" but no related event and/or=20 explanation) There is only one host in this datacenter/cluster which is SPM. I can't=20 find anything interesting in vdsm.log (short span of import time is in=20 attachment). Could you point me where should I look, please? Storage (FC) was formerly attached to RHEV3.5.3 on RHEL6.7 and was=20 imported into oVirt3.5.4 on CentOS7.1 Thanks in advance, Jiri Slezka --------------080609050703070305060003 Content-Type: text/x-log; name="import_problem_vdsm.log" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="import_problem_vdsm.log" [root@ovirt04 ~]# tailf /var/log/vdsm/vdsm.log Thread-209541::INFO::2015-09-10 00:10:34,590::logUtils::47::dispatcher::(= wrapper) Run and protect: getStoragePoolInfo, Return response: {'info': {= 'name': 'No Description', 'isoprefix': '', 'pool_status': 'connected', 'l= ver': 4L, 'domains': u'088e7ed9-84c7-4fbd-a570-f37fa986a772:Active', 'mas= ter_uuid': '088e7ed9-84c7-4fbd-a570-f37fa986a772', 'version': '3', 'spm_i= d': 1, 'type': 'FCP', 'master_ver': 1}, 'dominfo': {u'088e7ed9-84c7-4fbd-= a570-f37fa986a772': {'status': u'Active', 'diskfree': '4668629450752', 'i= soprefix': '', 'alerts': [], 'disktotal': '11711973163008', 'version': 3}= }} Thread-209542::INFO::2015-09-10 00:10:34,659::logUtils::44::dispatcher::(= wrapper) Run and protect: repoStats(options=3DNone) Thread-209542::INFO::2015-09-10 00:10:34,659::logUtils::47::dispatcher::(= wrapper) Run and protect: repoStats, Return response: {u'088e7ed9-84c7-4f= bd-a570-f37fa986a772': {'code': 0, 'actual': True, 'version': 3, 'acquire= d': True, 'delay': '0.000370046', 'lastCheck': '5.1', 'valid': True}} VM Channels Listener::INFO::2015-09-10 00:10:35,728::guestagent::180::vm.= Vm::(_handleAPIVersion) vmId=3D`c1279a24-06de-470a-8b9f-3f3cfc24f58b`::Gu= est API version changed from 2 to 1 VM Channels Listener::INFO::2015-09-10 00:10:37,976::guestagent::180::vm.= Vm::(_handleAPIVersion) vmId=3D`884dd325-4429-4150-8aa2-a473691f100b`::Gu= est API version changed from 2 to 1 Thread-206354::INFO::2015-09-10 00:10:40,039::logUtils::44::dispatcher::(= wrapper) Run and protect: getVolumeSize(sdUUID=3Du'088e7ed9-84c7-4fbd-a57= 0-f37fa986a772', spUUID=3Du'00000002-0002-0002-0002-0000000002b9', imgUUI= D=3Du'9d18dc91-f312-4f6c-9142-57e0b9f1aa7e', volUUID=3Du'1eed50b3-356b-48= 95-921e-61bad55f6a03', options=3DNone) Thread-206354::INFO::2015-09-10 00:10:40,039::logUtils::47::dispatcher::(= wrapper) Run and protect: getVolumeSize, Return response: {'truesize': '2= 1474836480', 'apparentsize': '21474836480'} VM Channels Listener::INFO::2015-09-10 00:10:40,754::guestagent::180::vm.= Vm::(_handleAPIVersion) vmId=3D`c1279a24-06de-470a-8b9f-3f3cfc24f58b`::Gu= est API version changed from 2 to 1 Thread-206478::INFO::2015-09-10 00:10:42,178::logUtils::44::dispatcher::(= wrapper) Run and protect: getVolumeSize(sdUUID=3Du'088e7ed9-84c7-4fbd-a57= 0-f37fa986a772', spUUID=3Du'00000002-0002-0002-0002-0000000002b9', imgUUI= D=3Du'd566b616-1159-4fa8-8f3f-48b32556e1c0', volUUID=3Du'3a3c885e-1846-49= f0-ad5d-00cede0242fc', options=3DNone) Thread-206478::INFO::2015-09-10 00:10:42,185::logUtils::47::dispatcher::(= wrapper) Run and protect: getVolumeSize, Return response: {'truesize': '2= 1474836480', 'apparentsize': '21474836480'} VM Channels Listener::INFO::2015-09-10 00:10:42,990::guestagent::180::vm.= Vm::(_handleAPIVersion) vmId=3D`884dd325-4429-4150-8aa2-a473691f100b`::Gu= est API version changed from 2 to 1 Thread-209547::INFO::2015-09-10 00:10:44,625::logUtils::44::dispatcher::(= wrapper) Run and protect: getSpmStatus(spUUID=3Du'00000002-0002-0002-0002= -0000000002b9', options=3DNone) Thread-209547::INFO::2015-09-10 00:10:44,635::logUtils::47::dispatcher::(= wrapper) Run and protect: getSpmStatus, Return response: {'spm_st': {'spm= Id': 1, 'spmStatus': 'SPM', 'spmLver': 4L}} Thread-209548::INFO::2015-09-10 00:10:44,648::logUtils::44::dispatcher::(= wrapper) Run and protect: getStoragePoolInfo(spUUID=3Du'00000002-0002-000= 2-0002-0000000002b9', options=3DNone) Thread-209548::INFO::2015-09-10 00:10:44,656::logUtils::47::dispatcher::(= wrapper) Run and protect: getStoragePoolInfo, Return response: {'info': {= 'name': 'No Description', 'isoprefix': '', 'pool_status': 'connected', 'l= ver': 4L, 'domains': u'088e7ed9-84c7-4fbd-a570-f37fa986a772:Active', 'mas= ter_uuid': '088e7ed9-84c7-4fbd-a570-f37fa986a772', 'version': '3', 'spm_i= d': 1, 'type': 'FCP', 'master_ver': 1}, 'dominfo': {u'088e7ed9-84c7-4fbd-= a570-f37fa986a772': {'status': u'Active', 'diskfree': '4668629450752', 'i= soprefix': '', 'alerts': [], 'disktotal': '11711973163008', 'version': 3}= }} Thread-209549::INFO::2015-09-10 00:10:44,869::logUtils::44::dispatcher::(= wrapper) Run and protect: getVolumeInfo(sdUUID=3Du'088e7ed9-84c7-4fbd-a57= 0-f37fa986a772', spUUID=3Du'00000002-0002-0002-0002-0000000002b9', imgUUI= D=3Du'fb8f3165-5976-4094-9d37-ea0b09124547', volUUID=3Du'cc83caa4-e366-4f= d6-94b7-d16089aa29d6', options=3DNone) Thread-209549::INFO::2015-09-10 00:10:45,133::volume::847::Storage.Volume= ::(getInfo) Info request: sdUUID=3D088e7ed9-84c7-4fbd-a570-f37fa986a772 i= mgUUID=3Dfb8f3165-5976-4094-9d37-ea0b09124547 volUUID =3D cc83caa4-e366-4= fd6-94b7-d16089aa29d6=20 Thread-209549::INFO::2015-09-10 00:10:45,170::volume::875::Storage.Volume= ::(getInfo) 088e7ed9-84c7-4fbd-a570-f37fa986a772/fb8f3165-5976-4094-9d37-= ea0b09124547/cc83caa4-e366-4fd6-94b7-d16089aa29d6 info is {'status': 'OK'= , 'domain': '088e7ed9-84c7-4fbd-a570-f37fa986a772', 'voltype': 'LEAF', 'd= escription': '', 'parent': '53c5003d-80de-4dfd-b5d8-50537a3a54d6', 'forma= t': 'COW', 'image': 'fb8f3165-5976-4094-9d37-ea0b09124547', 'ctime': '144= 0688666', 'disktype': '2', 'legality': 'LEGAL', 'mtime': '0', 'apparentsi= ze': '6442450944', 'children': [], 'pool': '', 'capacity': '32212254720',= 'uuid': u'cc83caa4-e366-4fd6-94b7-d16089aa29d6', 'truesize': '6442450944= ', 'type': 'SPARSE'} Thread-209549::INFO::2015-09-10 00:10:45,171::logUtils::47::dispatcher::(= wrapper) Run and protect: getVolumeInfo, Return response: {'info': {'stat= us': 'OK', 'domain': '088e7ed9-84c7-4fbd-a570-f37fa986a772', 'voltype': '= LEAF', 'description': '', 'parent': '53c5003d-80de-4dfd-b5d8-50537a3a54d6= ', 'format': 'COW', 'image': 'fb8f3165-5976-4094-9d37-ea0b09124547', 'cti= me': '1440688666', 'disktype': '2', 'legality': 'LEGAL', 'mtime': '0', 'a= pparentsize': '6442450944', 'children': [], 'pool': '', 'capacity': '3221= 2254720', 'uuid': u'cc83caa4-e366-4fd6-94b7-d16089aa29d6', 'truesize': '6= 442450944', 'type': 'SPARSE'}} Thread-209550::INFO::2015-09-10 00:10:45,249::logUtils::44::dispatcher::(= wrapper) Run and protect: getVolumeInfo(sdUUID=3Du'088e7ed9-84c7-4fbd-a57= 0-f37fa986a772', spUUID=3Du'00000002-0002-0002-0002-0000000002b9', imgUUI= D=3Du'fb8f3165-5976-4094-9d37-ea0b09124547', volUUID=3Du'53c5003d-80de-4d= fd-b5d8-50537a3a54d6', options=3DNone) Thread-209550::INFO::2015-09-10 00:10:45,280::volume::847::Storage.Volume= ::(getInfo) Info request: sdUUID=3D088e7ed9-84c7-4fbd-a570-f37fa986a772 i= mgUUID=3Dfb8f3165-5976-4094-9d37-ea0b09124547 volUUID =3D 53c5003d-80de-4= dfd-b5d8-50537a3a54d6=20 Thread-209550::INFO::2015-09-10 00:10:45,328::volume::875::Storage.Volume= ::(getInfo) 088e7ed9-84c7-4fbd-a570-f37fa986a772/fb8f3165-5976-4094-9d37-= ea0b09124547/53c5003d-80de-4dfd-b5d8-50537a3a54d6 info is {'status': 'OK'= , 'domain': '088e7ed9-84c7-4fbd-a570-f37fa986a772', 'voltype': 'INTERNAL'= , 'description': 'imported by virt-v2v', 'parent': '00000000-0000-0000-00= 00-000000000000', 'format': 'RAW', 'image': 'fb8f3165-5976-4094-9d37-ea0b= 09124547', 'ctime': '1440688463', 'disktype': '1', 'legality': 'LEGAL', '= mtime': '0', 'apparentsize': '32212254720', 'children': [], 'pool': '', '= capacity': '32212254720', 'uuid': u'53c5003d-80de-4dfd-b5d8-50537a3a54d6'= , 'truesize': '32212254720', 'type': 'PREALLOCATED'} Thread-209550::INFO::2015-09-10 00:10:45,335::logUtils::47::dispatcher::(= wrapper) Run and protect: getVolumeInfo, Return response: {'info': {'stat= us': 'OK', 'domain': '088e7ed9-84c7-4fbd-a570-f37fa986a772', 'voltype': '= INTERNAL', 'description': 'imported by virt-v2v', 'parent': '00000000-000= 0-0000-0000-000000000000', 'format': 'RAW', 'image': 'fb8f3165-5976-4094-= 9d37-ea0b09124547', 'ctime': '1440688463', 'disktype': '1', 'legality': '= LEGAL', 'mtime': '0', 'apparentsize': '32212254720', 'children': [], 'poo= l': '', 'capacity': '32212254720', 'uuid': u'53c5003d-80de-4dfd-b5d8-5053= 7a3a54d6', 'truesize': '32212254720', 'type': 'PREALLOCATED'}} VM Channels Listener::INFO::2015-09-10 00:10:45,769::guestagent::180::vm.= Vm::(_handleAPIVersion) vmId=3D`c1279a24-06de-470a-8b9f-3f3cfc24f58b`::Gu= est API version changed from 2 to 1 Thread-206610::INFO::2015-09-10 00:10:47,039::logUtils::44::dispatcher::(= wrapper) Run and protect: getVolumeSize(sdUUID=3Du'088e7ed9-84c7-4fbd-a57= 0-f37fa986a772', spUUID=3Du'00000002-0002-0002-0002-0000000002b9', imgUUI= D=3Du'ac84d516-7b45-4a16-b266-affe7f722c11', volUUID=3Du'ce0f3596-eb2f-4e= 12-a415-a74fd2c83caa', options=3DNone) Thread-206610::INFO::2015-09-10 00:10:47,041::logUtils::47::dispatcher::(= wrapper) Run and protect: getVolumeSize, Return response: {'truesize': '4= 2949672960', 'apparentsize': '42949672960'} VM Channels Listener::INFO::2015-09-10 00:10:48,586::guestagent::180::vm.= Vm::(_handleAPIVersion) vmId=3D`884dd325-4429-4150-8aa2-a473691f100b`::Gu= est API version changed from 2 to 1 Thread-209552::INFO::2015-09-10 00:10:50,172::logUtils::44::dispatcher::(= wrapper) Run and protect: repoStats(options=3DNone) Thread-209552::INFO::2015-09-10 00:10:50,173::logUtils::47::dispatcher::(= wrapper) Run and protect: repoStats, Return response: {u'088e7ed9-84c7-4f= bd-a570-f37fa986a772': {'code': 0, 'actual': True, 'version': 3, 'acquire= d': True, 'delay': '0.000381038', 'lastCheck': '0.4', 'valid': True}} ^C --------------080609050703070305060003-- --------------ms070407060502090709050400 Content-Type: application/pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" Content-Description: S/MIME Cryptographic Signature MIAGCSqGSIb3DQEHAqCAMIACAQExDzANBglghkgBZQMEAgEFADCABgkqhkiG9w0BBwEAAKCC CWcwggScMIIDhKADAgECAhEAuOSLPwlcx/l5IqBlguM0fDANBgkqhkiG9w0BAQUFADA7MQsw CQYDVQQGEwJOTDEPMA0GA1UEChMGVEVSRU5BMRswGQYDVQQDExJURVJFTkEgUGVyc29uYWwg Q0EwHhcNMTQxMTEwMDAwMDAwWhcNMTYxMTA5MjM1OTU5WjBlMQswCQYDVQQGEwJDWjElMCMG A1UECgwcU2xlenNrw6EgdW5pdmVyeml0YSB2IE9wYXbEmzEYMBYGA1UEAwwPSmnFmcOtIFNs w6nFvmthMRUwEwYJKoZIhvcNAQkCFgZzbGV6a2EwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAw ggEKAoIBAQDNcPHUXg4ZfD3shn/1zeMf8tyn/ZplDk1756hc+PVHYNO2VRP2p1HKRdtcfj1i 2V87na0EfMmfxM77dJJklSnAsCXrs0by2eHzdCz746vErs5VkSnZ1nhOWH7FViKadiyxmAv+ zXL+jkzb678GHsT2jPWdHjfhgQXAzd0hE5AqkQ3sRGRspsfruRmfgStEoE2+Ubq4jC69pBYW i80zdAUOc+9Kl5Zfolfo/TpFViXIo4i1FMgDRNYZAhBKpHz70zN/7VUqTl/7x9z3a6ytNC8J TbbMdj8SdWhRV0oyOOhYlFHL+1ZS0KtQ0iz5yWs9dCkq77LrTXCXaWSGBRlQ8H/5AgMBAAGj ggFvMIIBazAfBgNVHSMEGDAWgBRjTUNaGUg/xEbBArq/7g7lgrdmpjAdBgNVHQ4EFgQUNHjX Vei/P0DdklwoP8A3Tkq0XTYwDgYDVR0PAQH/BAQDAgWgMAwGA1UdEwEB/wQCMAAwHQYDVR0l BBYwFAYIKwYBBQUHAwQGCCsGAQUFBwMCMBgGA1UdIAQRMA8wDQYLKwYBBAGyMQECAh0wPwYD VR0fBDgwNjA0oDKgMIYuaHR0cDovL2NybC50Y3MudGVyZW5hLm9yZy9URVJFTkFQZXJzb25h bENBLmNybDByBggrBgEFBQcBAQRmMGQwOgYIKwYBBQUHMAKGLmh0dHA6Ly9jcnQudGNzLnRl cmVuYS5vcmcvVEVSRU5BUGVyc29uYWxDQS5jcnQwJgYIKwYBBQUHMAGGGmh0dHA6Ly9vY3Nw LnRjcy50ZXJlbmEub3JnMB0GA1UdEQQWMBSBEmppcmkuc2xlemthQHNsdS5jejANBgkqhkiG 9w0BAQUFAAOCAQEAJy6bixJ53paigwWwnXfipRly2TTkICwf4PtXw9hOBoYC17PbPpAoGBtT Dvz6pQW4woSJ4JbkkD9JKGPlZXt0fQgZKgbfQ7sRFQ54goOhvJYm+CFJUPiSXrZ/i1CUzI40 U3kXYbWOq99yKid5aUEaIub9E6cJY6fybt7ireTV2IKVNIm/AXWjjf6jxGVavQ1QzTxmRvfE sXpQis5jgCeJjRHhZ4BhwRChkIThLYfWTSYId9rbtuj3yjLjtJipDhHJEuIckgV8sCDbjbyt xo0WNLQmfL0KUVxvpfMfdZ3McGKwn7nQiqBcpsGI3+9pfmHkMzy4+rDGZCHkeyNNxEUpLDCC BMMwggOroAMCAQICEHP+V/rfuMUIgXtmuWvwLe8wDQYJKoZIhvcNAQEFBQAwga4xCzAJBgNV BAYTAlVTMQswCQYDVQQIEwJVVDEXMBUGA1UEBxMOU2FsdCBMYWtlIENpdHkxHjAcBgNVBAoT FVRoZSBVU0VSVFJVU1QgTmV0d29yazEhMB8GA1UECxMYaHR0cDovL3d3dy51c2VydHJ1c3Qu Y29tMTYwNAYDVQQDEy1VVE4tVVNFUkZpcnN0LUNsaWVudCBBdXRoZW50aWNhdGlvbiBhbmQg RW1haWwwHhcNMDkwNTE4MDAwMDAwWhcNMjgxMjMxMjM1OTU5WjA7MQswCQYDVQQGEwJOTDEP MA0GA1UEChMGVEVSRU5BMRswGQYDVQQDExJURVJFTkEgUGVyc29uYWwgQ0EwggEiMA0GCSqG SIb3DQEBAQUAA4IBDwAwggEKAoIBAQDIFdn1M2ojoZANz7sFRMOrH0o1hRohhaBP+PBA4kpD m/5bsbC/tFfcdYBBS2Qa9ttPb4/QJUU1+erLSvr72tPtRYgRlDbkzKgN78U9N+0We+PClZ5Y M38i+/j/7Oa+264KZSUih9pvhItG6ECGKD+/VgjiSumDouki+y36tigfkcHDcftTwCtOpAyh bp1V7ezhJIc6COINHOTETdDLJ/qEZObRl51WJFuTuykuQ+JBaj3iSmX8ml9ahoe8h8d5gJaZ UcaQD2SRmX0Q3awsAyrheGT+zj1O9CtQEUvRWNSbA/B/9TtTsFND+8UvxAQpGjqs11Xp0Q6V 0Tsxf3hPriktAgMBAAGjggFNMIIBSTAfBgNVHSMEGDAWgBSJgmd9xJ0mcABLtFBIfN49rgRu fTAdBgNVHQ4EFgQUY01DWhlIP8RGwQK6v+4O5YK3ZqYwDgYDVR0PAQH/BAQDAgEGMBIGA1Ud EwEB/wQIMAYBAf8CAQAwGAYDVR0gBBEwDzANBgsrBgEEAbIxAQICHTBYBgNVHR8EUTBPME2g S6BJhkdodHRwOi8vY3JsLnVzZXJ0cnVzdC5jb20vVVROLVVTRVJGaXJzdC1DbGllbnRBdXRo ZW50aWNhdGlvbmFuZEVtYWlsLmNybDBvBggrBgEFBQcBAQRjMGEwOAYIKwYBBQUHMAKGLGh0 dHA6Ly9jcnQudXNlcnRydXN0LmNvbS9VVE5BQUFDbGllbnRfQ0EuY3J0MCUGCCsGAQUFBzAB hhlodHRwOi8vb2NzcC51c2VydHJ1c3QuY29tMA0GCSqGSIb3DQEBBQUAA4IBAQAGK6lTLxPc XDkWzIafXkx7cvvsjVWKXpoK/1NMdvQGPVDPV/Ciz6+ZjKr+oBl2PpkDMvp1gziKu2uapQwT stQbduaULmeYWeORbAKQmpzIYEtVq8qIWo0r5WmVAwfR1A78JCIuWbFjpF/t2SNy5JzOOlxs H0+pAMkd/vp/RS22LoTdDyegWRhO1XYlRfSZJnnbb58j90O7Kw8Eo4EmLLd7Nfk9d19AIeZ/ HaWWWr3QyxY6bLthi4r9BDlECsss4cvOLhCYGtvgk+1JZGQIIJ+3o1Dwot3KtMZ8DD3nXhXc J4bkOjtSWherqQZTK50Jc2QcAcP9MNKHA2/kFQN6OV9oMYIDGjCCAxYCAQEwUDA7MQswCQYD VQQGEwJOTDEPMA0GA1UEChMGVEVSRU5BMRswGQYDVQQDExJURVJFTkEgUGVyc29uYWwgQ0EC EQC45Is/CVzH+XkioGWC4zR8MA0GCWCGSAFlAwQCAQUAoIIBmzAYBgkqhkiG9w0BCQMxCwYJ KoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xNTA5MDkyMjMwMjlaMC8GCSqGSIb3DQEJBDEi BCCuE3j/Uva83Wo8kQEzQUfUwsCrxavWRS0rkGVULugakTBfBgkrBgEEAYI3EAQxUjBQMDsx CzAJBgNVBAYTAk5MMQ8wDQYDVQQKEwZURVJFTkExGzAZBgNVBAMTElRFUkVOQSBQZXJzb25h bCBDQQIRALjkiz8JXMf5eSKgZYLjNHwwYQYLKoZIhvcNAQkQAgsxUqBQMDsxCzAJBgNVBAYT Ak5MMQ8wDQYDVQQKEwZURVJFTkExGzAZBgNVBAMTElRFUkVOQSBQZXJzb25hbCBDQQIRALjk iz8JXMf5eSKgZYLjNHwwbAYJKoZIhvcNAQkPMV8wXTALBglghkgBZQMEASowCwYJYIZIAWUD BAECMAoGCCqGSIb3DQMHMA4GCCqGSIb3DQMCAgIAgDANBggqhkiG9w0DAgIBQDAHBgUrDgMC BzANBggqhkiG9w0DAgIBKDANBgkqhkiG9w0BAQEFAASCAQAi5by6FtzX4C1Ccry1opuDgBPt zT6Xkg48KhvWeSj2HEwnBe+TzlelmkzY8knQMVw9BZL0xOJIK9DH/9RxIykIF2lx4GQdRneK jzUzm2kP0jk+RUt6L9RcjNr7cTFO0VYahZc2+syHp0MXWxdL1m9eVlgk4nEYTScU4fHVkOVB QXkMdA6S7IuJ30EntEkiQwCfaCLoNFS/7JMwzi3F8YS4HP1Su2pV43Z6skH/cfsiH3OKBP91 /XFt4+itS98N3CCjS41e2/NYBiiR4hRkmLlkZbD09G895XPys3BafgoBOE5y2bv2mLIEpyoy xyFfbRkETJeNepO8dLQ8mTd3Zt04AAAAAAAA --------------ms070407060502090709050400--

2 7

Testing ovirt 3.6 RC
by wodel youchi 06 Oct '15

06 Oct '15

Hi, is the problem about the VM engine not being shown on webui corrected? I have updated my installation ovirt 3.6 beta 6 to RC (I didn't redeploy from scratch), still the same problem no vm engine on webui, attaching the hosted-storage to the default DC, causes the VM engine to crash. Do I have to redeploy from scratch? PS: I am using NFS4 for storage. thanks in advance.

3 8

To start vm (runonce) with Rest API
by Qingyun Ao 06 Oct '15

06 Oct '15

Hello, all, Before starting a vm in the first time (runonce), we can attach a floppy drive to the vm. How can I compose the XML file to do this with oViirt Rest API? -- Best regards, Ao Qingyun aoqingyun(a)gmail.com

2 1

restore
by Budur Nagaraju 06 Oct '15

06 Oct '15

HI Getting below error while restoring ovirt, [root@cstlb1 ovirtrestore]# engine-backup --mode=restore --file=ovirtbackup --log=ovirtlog Preparing to restore: - Unpacking file 'ovirtbackup' Restoring: - Files FATAL: Can't connect to database 'engine'. Please see '/usr/bin/engine-backup --help'. [root@cstlb1 ovirtrestore]# Thanks, Nagaraju

2 1

Hello, Multiple server into a single processing machine
by Khairul Annuar Bin Nordin 02 Oct '15

02 Oct '15

Good day, I was wondering if there is a way to configure ovirt to act as an operation to connect multiple server as one machine. Regarding this, the machine would detect all server processor and manage it as one machine. example: I have 4 server with 8 core processor each, which result as 32 core. All the 32 core should be detected under one management. Ovirt will act as the main processing manager and in it will have multiple instance, these instance will run on across all server with high availability and resource sharing. Thank you for your time, and I hope to hear from you soon.

3 2

Ovirtmgmt not on team device
by Johan Kooijman 02 Oct '15

02 Oct '15

Hi all, I'm adding my first CentOS 7 host to my cluster today, but running into an issue. When setting up network for the new host I don't have the ability to set ovirtmgmt to the team I created, see screenshot: http://imgur.com/k8GWwcK The team however, works perfectly fine: [root@hv15]# teamdctl team0 state view setup: runner: lacp ports: ens2f0 link watches: link summary: up instance[link_watch_0]: name: ethtool link: up runner: aggregator ID: 4, Selected selected: yes state: current ens2f1 link watches: link summary: up instance[link_watch_0]: name: ethtool link: up runner: aggregator ID: 4, Selected selected: yes state: current runner: active: yes fast rate: no With CentOS 6 and bonding I did not have this issue. Am I missing something here? -- Met vriendelijke groeten / With kind regards, Johan Kooijman

2 2

Troubles after upgrading oVirt from 3.4 to 3.5
by Andy Michielsen 02 Oct '15

02 Oct '15

Hello, I had an issue when I installed some updates on my centos 6.7 hosts. (Engine, node1 and node2) I seems that the new java version has higher security requirments. So I decided to take the plunge and upgrade all to the new 3.5 version. At first everything seem to go just fine and I was able to start some of my virtual machines up. But 3 days later, after the weekend, my users noticed that it had stopped working. I'm now unable to get the hosts up in the ovirt engine and also my storage domains are unavailable. Can someone tell me what I can do, check, change to get everything up again. I can send the sos logs via google drive. Kind regards.

4 9

Problems upgrading Ovirt 3.5.4 to 3.6 RC
by Adrian Garay 01 Oct '15

01 Oct '15

--------------070306020106050808000908 Content-Type: text/plain; charset="utf-8"; format=flowed Content-Transfer-Encoding: 7bit I followed the instructions here <http://www.ovirt.org/OVirt_3.6_Release_Notes> on upgrading to Ovirt 3.6RC from 3.5.4 and have encountered a few problems. My Ovirt 3.5.4 test environment consisted of: 1 Centos 7.1 host running hosted engine stored on a separate NFS server 1 Centos 7.1 ovirt engine vm With some research I was able to solve two of the three issues I've experienced. I'll list them here for acadamia - and perhaps they point to a misstep on my behalf that is causing the third. 1. Upon a "successful" upgrade, the admin@local account was expired. The problem is documented here <https://bugzilla.redhat.com/show_bug.cgi?id=1261382> and currently caused by following the upgrade instructions as seen here <http://www.ovirt.org/OVirt_3.6_Release_Notes#Install_.2F_Upgrade_from_previ…>. Solution was to do the following from the ovirt-engine vm (they may not have all been necessary, it was late!): a. ovirt-aaa-jdbc-tool --db-config=/etc/ovirt-engine/aaa/internal.properties user password-reset admin --force b. ovirt-aaa-jdbc-tool --db-config=/etc/ovirt-engine/aaa/internal.properties user password-reset admin --password-valid-to="2019-01-01 12:00:00Z" c. ovirt-aaa-jdbc-tool --db-config=/etc/ovirt-engine/aaa/internal.properties user edit admin --account-valid-from="2014-01-01 12:00:00Z" --account-valid-to="2019-01-01 12:00:00Z" d. ovirt-aaa-jdbc-tool --db-config=/etc/ovirt-engine/aaa/internal.properties user unlock admin 2. Rebooting the Centos 7.1 host caused a loss of default gateway. The engine does not allow you to modify the host because it is in use and modifying /etc/sysconfig/network-scripts is undone by VDSM upon the next reboot. I assume in the past this worked okay because I had a GATEWAY=xxxx in /etc/sysconfig/network as a pre-Ovirt relic. Solution here was to add gateway and defaultRoute fields using the vdsClient command line utility: a. vdsClient -s 0 setupNetworks networks='{ovirtmgmt:{ipaddr:10.1.0.21,netmask:255.255.254.0,bonding:bond0,bridged:true,gateway:10.1.1.254,defaultRoute:True}}' b. vdsClient -s 0 setSafeNetworkConfig Now for the issue I can't solve. When I reboot the Centos 7.1 host I get the following: [root@ovirt-one /]# hosted-engine --vm-status You must run deploy first I then notice that the NFS share to the hosted engine is not mounted and the ovirt-ha-agent.service has failed to start itself at boot. [root@ovirt-one /]# systemctl status ovirt-ha-agent.service ovirt-ha-agent.service - oVirt Hosted Engine High Availability Monitoring Agent Loaded: loaded (/usr/lib/systemd/system/ovirt-ha-agent.service; enabled) Active: failed (Result: exit-code) since Tue 2015-09-29 12:17:55 CDT; 9min ago Process: 1424 ExecStop=/usr/lib/systemd/systemd-ovirt-ha-agent stop (code=exited, status=0/SUCCESS) Process: 1210 ExecStart=/usr/lib/systemd/systemd-ovirt-ha-agent start (code=exited, status=0/SUCCESS) Main PID: 1377 (code=exited, status=254) CGroup: /system.slice/ovirt-ha-agent.service Sep 29 12:17:55 ovirt-one.thaultanklines.com systemd-ovirt-ha-agent[1210]: Starting ovirt-ha-agent: [ OK ] Sep 29 12:17:55 ovirt-one.thaultanklines.com systemd[1]: Started oVirt Hosted Engine High Availability Monitoring Agent. Sep 29 12:17:55 ovirt-one.thaultanklines.com ovirt-ha-agent[1377]: ovirt-ha-agent ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine ERROR Service vdsmd is not running and the admin is responsible for starting it. Shutting down. Sep 29 12:17:55 ovirt-one.thaultanklines.com systemd[1]: ovirt-ha-agent.service: main process exited, code=exited, status=254/n/a Sep 29 12:17:55 ovirt-one.thaultanklines.com systemd[1]: Unit ovirt-ha-agent.service entered failed state. Manually starting ovirt-ha-agent.service works and it then correctly mounts the hosted engine NFS share and all works and I can eventually start the hosted engine. Why would the ovirt-ha-agent.service attempt to start before VDSM was ready? Snippet from /usr/lib/systemd/system/ovirt-ha-agent.service [Unit] Description=oVirt Hosted Engine High Availability Monitoring Agent Wants=ovirt-ha-broker.service Wants=vdsmd.service Wants=sanlock.service After=ovirt-ha-broker.service Any help would be appreciated! --------------070306020106050808000908 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body bgcolor="#FFFFFF" text="#000000"> I followed the instructions <a href="http://www.ovirt.org/OVirt_3.6_Release_Notes">here</a> on upgrading to Ovirt 3.6RC from 3.5.4 and have encountered a few problems. My Ovirt 3.5.4 test environment consisted of: 1 Centos 7.1 host running hosted engine stored on a separate NFS server 1 Centos 7.1 ovirt engine vm With some research I was able to solve two of the three issues I've experienced. I'll list them here for acadamia - and perhaps they point to a misstep on my behalf that is causing the third. 1. Upon a "successful" upgrade, the admin@local account was expired. The problem is <a href="https://bugzilla.redhat.com/show_bug.cgi?id=1261382">documented here</a> and currently caused by following the upgrade instructions <a href="http://www.ovirt.org/OVirt_3.6_Release_Notes#Install_.2F_Upgrade_from_previ…">as seen here</a>. Solution was to do the following from the ovirt-engine vm (they may not have all been necessary, it was late!): a. ovirt-aaa-jdbc-tool --db-config=/etc/ovirt-engine/aaa/internal.properties user password-reset admin --force b. ovirt-aaa-jdbc-tool --db-config=/etc/ovirt-engine/aaa/internal.properties user password-reset admin --password-valid-to="2019-01-01 12:00:00Z" c. ovirt-aaa-jdbc-tool --db-config=/etc/ovirt-engine/aaa/internal.properties user edit admin --account-valid-from="2014-01-01 12:00:00Z" --account-valid-to="2019-01-01 12:00:00Z" d. ovirt-aaa-jdbc-tool --db-config=/etc/ovirt-engine/aaa/internal.properties user unlock admin 2. Rebooting the Centos 7.1 host caused a loss of default gateway. The engine does not allow you to modify the host because it is in use and modifying /etc/sysconfig/network-scripts is undone by VDSM upon the next reboot. I assume in the past this worked okay because I had a GATEWAY=xxxx in /etc/sysconfig/network as a pre-Ovirt relic. Solution here was to add gateway and defaultRoute fields using the vdsClient command line utility: a. vdsClient -s 0 setupNetworks networks='{ovirtmgmt:{ipaddr:10.1.0.21,netmask:255.255.254.0,bonding:bond0,bridged:true,gateway:10.1.1.254,defaultRoute:True}}' b. vdsClient -s 0 setSafeNetworkConfig Now for the issue I can't solve. When I reboot the Centos 7.1 host I get the following: [root@ovirt-one /]# hosted-engine --vm-status You must run deploy first I then notice that the NFS share to the hosted engine is not mounted and the ovirt-ha-agent.service has failed to start itself at boot. [root@ovirt-one /]# systemctl status ovirt-ha-agent.service ovirt-ha-agent.service - oVirt Hosted Engine High Availability Monitoring Agent Loaded: loaded (/usr/lib/systemd/system/ovirt-ha-agent.service; enabled) Active: failed (Result: exit-code) since Tue 2015-09-29 12:17:55 CDT; 9min ago Process: 1424 ExecStop=/usr/lib/systemd/systemd-ovirt-ha-agent stop (code=exited, status=0/SUCCESS) Process: 1210 ExecStart=/usr/lib/systemd/systemd-ovirt-ha-agent start (code=exited, status=0/SUCCESS) Main PID: 1377 (code=exited, status=254) CGroup: /system.slice/ovirt-ha-agent.service Sep 29 12:17:55 ovirt-one.thaultanklines.com systemd-ovirt-ha-agent[1210]: Starting ovirt-ha-agent: [ OK ] Sep 29 12:17:55 ovirt-one.thaultanklines.com systemd[1]: Started oVirt Hosted Engine High Availability Monitoring Agent. Sep 29 12:17:55 ovirt-one.thaultanklines.com ovirt-ha-agent[1377]: ovirt-ha-agent ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine ERROR Service vdsmd is not running and the admin is responsible for starting it. Shutting down. Sep 29 12:17:55 ovirt-one.thaultanklines.com systemd[1]: ovirt-ha-agent.service: main process exited, code=exited, status=254/n/a Sep 29 12:17:55 ovirt-one.thaultanklines.com systemd[1]: Unit ovirt-ha-agent.service entered failed state. Manually starting ovirt-ha-agent.service works and it then correctly mounts the hosted engine NFS share and all works and I can eventually start the hosted engine. Why would the ovirt-ha-agent.service attempt to start before VDSM was ready? Snippet from /usr/lib/systemd/system/ovirt-ha-agent.service [Unit] Description=oVirt Hosted Engine High Availability Monitoring Agent Wants=ovirt-ha-broker.service Wants=vdsmd.service Wants=sanlock.service After=ovirt-ha-broker.service Any help would be appreciated! </body> </html> --------------070306020106050808000908--

2 3

Admin@internal inlog problems with clean install 3.6RC
by Joop 01 Oct '15

01 Oct '15

I just installed 3.6RC and got Cannot Login. User Account has expired, Please contact your system administrator. in the webui. In engine.log I see the following: 2015-09-30 09:59:52,150 INFO [org.ovirt.engine.core.bll.aaa.LoginBaseCommand] (default task-30) [] Can't login user 'admin' with authentication profile 'internal' because the authentication failed. 2015-09-30 09:59:52,162 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-30) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: The account for admin got expired. Please contact the system administrator. 2015-09-30 09:59:52,171 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-30) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: User admin@internal failed to log in. 2015-09-30 09:59:52,171 WARN [org.ovirt.engine.core.bll.aaa.LoginAdminUserCommand] (default task-30) [] CanDoAction of action 'LoginAdminUser' failed for user admin@internal. Reasons: USER_ACCOUNT_EXPIRED Using ovirt-aaa-jdbc-tool user password-reset admin --password-valid-to="2025-08-15 10:30:00Z" to set a new password doesn't help, restarting ovirt-engine doesn't work either. List of installed ovirt packages: ebay-cors-filter-1.0.1-0.1.ovirt.el7.noarch ovirt-engine-3.6.0-1.el7.centos.noarch ovirt-engine-backend-3.6.0-1.el7.centos.noarch ovirt-engine-cli-3.6.0.1-1.el7.centos.noarch ovirt-engine-dbscripts-3.6.0-1.el7.centos.noarch ovirt-engine-extension-aaa-jdbc-1.0.0-0.0.master.20150923074852.git46a67c9.el7.noarch ovirt-engine-extensions-api-impl-3.6.0-1.el7.centos.noarch ovirt-engine-lib-3.6.0-1.el7.centos.noarch ovirt-engine-restapi-3.6.0-1.el7.centos.noarch ovirt-engine-sdk-python-3.6.0.2-1.el7.centos.noarch ovirt-engine-setup-3.6.0-1.el7.centos.noarch ovirt-engine-setup-base-3.6.0-1.el7.centos.noarch ovirt-engine-setup-plugin-ovirt-engine-3.6.0-1.el7.centos.noarch ovirt-engine-setup-plugin-ovirt-engine-common-3.6.0-1.el7.centos.noarch ovirt-engine-setup-plugin-vmconsole-proxy-helper-3.6.0-1.el7.centos.noarch ovirt-engine-setup-plugin-websocket-proxy-3.6.0-1.el7.centos.noarch ovirt-engine-tools-3.6.0-1.el7.centos.noarch ovirt-engine-userportal-3.6.0-1.el7.centos.noarch ovirt-engine-vmconsole-proxy-helper-3.6.0-1.el7.centos.noarch ovirt-engine-webadmin-portal-3.6.0-1.el7.centos.noarch ovirt-engine-websocket-proxy-3.6.0-1.el7.centos.noarch ovirt-engine-wildfly-8.2.0-1.el7.x86_64 ovirt-engine-wildfly-overlay-001-2.el7.noarch ovirt-host-deploy-1.4.0-0.0.master.20150806005708.git670e9c8.el7.noarch ovirt-host-deploy-java-1.4.0-0.0.master.20150806005708.git670e9c8.el7.noarch ovirt-image-uploader-3.6.0-1.el7.centos.noarch ovirt-iso-uploader-3.6.0-1.el7.centos.noarch ovirt-release36-001-0.5.beta.noarch ovirt-vmconsole-1.0.0-0.0.master.20150821105434.gite14b2f0.el7.noarch ovirt-vmconsole-proxy-1.0.0-0.0.master.20150821105434.gite14b2f0.el7.noarch There is a BZ about this but I would expect it to be in this RC release since its almost 3wks old. Anything else I can check? Thanks, Joop

3 6

Esxi 5.5 under oVirt 3.5
by Conrad Lawes 30 Sep '15

30 Sep '15

Is it possible to run esxi v5.5 under oVirt 3.5, i.e. nested virtualization? If so, please point to me the how-to doc -- Regards, Conrad Lawes

4 3

Re: [ovirt-users] Multiple hosts
by Simone Tiraboschi 30 Sep '15

30 Sep '15

On Wed, Sep 30, 2015 at 6:11 PM, Budur Nagaraju <nbudoor(a)gmail.com> wrote: > 2015-09-30 18:22:15,052 WARN > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (DefaultQuartzScheduler_Worker-7) [6e31ee33] Correlation ID: 6e31ee33, Job > ID: b0ea3d1b-0019-4be5-89a9-b1135c4136f4, Call Stack: null, Custom Event > ID: -1, Message: Host infraesx2 cannot access the Storage Domain(s) > <UNKNOWN> attached to the Data Center Pulse. Setting Host state to > Non-Operational. It seams that your host is not able to access a storage attached to your datacenter; could you please check that?

3 3

Re: [ovirt-users] Unable to add another host
by Amador Pahim 30 Sep '15

30 Sep '15

This is a multi-part message in MIME format. --------------030600060402090402020907 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit On 09/30/2015 12:30 PM, Budur Nagaraju wrote: > > Can't we add another host even though storage pool is available ?? > We can. The issue seems to be the new host not able to connect to the storage. Can you share the vdsm.log for the event? > On Sep 30, 2015 8:26 PM, "Amador Pahim" <apahim(a)redhat.com > <mailto:apahim@redhat.com>> wrote: > > On 09/30/2015 09:59 AM, Budur Nagaraju wrote: > > 2015-09-30 18:22:15,059 WARN > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (DefaultQuartzScheduler_Worker-7) [6e31ee33] Correlation ID: > 4f29b4a7, Call Stack: null, Custom Event ID: -1, Message: > Failed to connect Host infraesx2 to Storage Pool Pulse > > Seems like you already have a Storage Pool called 'Pulse' and the > new host is not able to connect to it. vdsm.log on the infraesx2 > host will give you more details. > --------------030600060402090402020907 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit <html> <head> <meta content="text/html; charset=utf-8" http-equiv="Content-Type"> </head> <body bgcolor="#FFFFFF" text="#000000"> <div class="moz-cite-prefix">On 09/30/2015 12:30 PM, Budur Nagaraju wrote: </div> <blockquote cite="mid:CAHNF9Q8LD7k1rHpquZg4Cx_Lz3apWJ=Y-fY=zpqq0+LLu0HspA@mail.gmail.com" type="cite"> Can't we add another host even though storage pool is available ?? </blockquote> We can. The issue seems to be the new host not able to connect to the storage. Can you share the vdsm.log for the event? <blockquote cite="mid:CAHNF9Q8LD7k1rHpquZg4Cx_Lz3apWJ=Y-fY=zpqq0+LLu0HspA@mail.gmail.com" type="cite"> <div class="gmail_quote">On Sep 30, 2015 8:26 PM, "Amador Pahim" <<a moz-do-not-send="true" href="mailto:apahim@redhat.com">apahim(a)redhat.com</a>> wrote: <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">On 09/30/2015 09:59 AM, Budur Nagaraju wrote: <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> 2015-09-30 18:22:15,059 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-7) [6e31ee33] Correlation ID: 4f29b4a7, Call Stack: null, Custom Event ID: -1, Message: Failed to connect Host infraesx2 to Storage Pool Pulse </blockquote> Seems like you already have a Storage Pool called 'Pulse' and the new host is not able to connect to it. vdsm.log on the infraesx2 host will give you more details. </blockquote> </div> </blockquote> </body> </html> --------------030600060402090402020907--

2 1

Multiple hosts
by Budur Nagaraju 30 Sep '15

30 Sep '15

Hi Can someone help me in adding multiple hosts ? This is blocking by setup. Thanks Nagaraju

2 1

quota limit for vm
by Budur Nagaraju 30 Sep '15

30 Sep '15

HI How to limit Quota in number of creation of vms?unable to find the option. Thanks, Nagaraju

2 1