May 2018 - Users - oVirt List Archives

Network Address Change
by Paul.LKW 28 Dec '22

28 Dec '22

Hi All: I just has a case, I need to change the oVirt host and engine IP address due to data center decommission I checked in the hosted-engine host there are some files I could change ; in ovirt-hosted-engine/hosted-engine.conf ca_subject="O=simple.com, CN=1.2.3.4" gateway=1.2.3.254 and of course I need to change the ovirtmgmt interface IP too, I think just change the above line could do the tick, but where could I change the other host IP in the cluster ? I think I have to be lost all the host as once changed the hosted-engine host IP as it is in diff. sub net. Does there any command line tools could do that or someone has such experience could share? Best Regards, Paul.LKW

4 6

looking for some ISV backup software which integrates the backup API
by Nathanaël Blanchet 08 Jun '22

08 Jun '22

Hello, We are about to change our backup provider, and I find it is a great chance to choose a full supported ovirt backup solution. I currently use this python script vm-backup-scheduler (https://github.com/wefixit-AT/oVirtBackup) but it is not the workflow officially suggested by the community (https://www.ovirt.org/develop/release-management/features/storage/backup-re…) I've been looking for a long time an ISV who supports such an API, but the only one I found is this one : Acronis Backup Advanced suggested here https://access.redhat.com/ecosystem/search/#/ecosystem/Red%20Hat%20Enterpri… I ran the trial version, but it doesn't seem to do better than the vm-backup-scheduler script, and it doesn't seem to use the backup API (attach a clone as a disk to an existing vm). Can you suggest me some other ISV solutions, if they ever exist... or share me your backup experience?

5 4

OVS switch type for hosted-engine
by Devin A. Bougie 06 May '22

06 May '22

Is it possible to setup a hosted engine using the OVS switch type instead of Legacy? If it's not possible to start out as OVS, instructions for switching from Legacy to OVS after the fact would be greatly appreciated. Many thanks, Devin

4 5

USB3 redirection
by Rik Theys 19 Apr '22

19 Apr '22

Hi, I'm trying to assign a USB3 controller to a CentOS 7.4 VM in oVirt 4.1 with USB redirection enabled. I've created the following file in /etc/ovirt-engine/osinfo.conf.d: 01-usb.properties with content os.other.devices.usb.controller.value = nec-xhci and have restarted ovirt-engine. If I disable USB-support in the web interface for the VM, the xhci controller is added to the VM (I can see it in the qemu-kvm commandline), but usb redirection is not available. If I enable USB-support in the UI, no xhci controller is added (only 4 uhci controllers). Is there a way to make the controllers for usb redirection xhci controllers? Regards, Rik -- Rik Theys System Engineer KU Leuven - Dept. Elektrotechniek (ESAT) Kasteelpark Arenberg 10 bus 2440 - B-3001 Leuven-Heverlee +32(0)16/32.11.07 ---------------------------------------------------------------- <<Any errors in spelling, tact or fact are transmission errors>>

3 5

OVN routing and firewalling in oVirt
by Gianluca Cecchi 19 Apr '22

19 Apr '22

Hello, how do we manage routing between different OVN networks in oVirt? And between OVN networks and physical ones? Based on architecture read here: http://openvswitch.org/support/dist-docs/ovn-architecture.7.html I see terms for logical routers and gateway routers respectively but how to apply to oVirt configuration? Do I have to choose between setting up a specialized VM or a physical one: is it applicable/advisable to put on oVirt host itself the gateway functionality? Is there any security policy (like security groups in Openstack) to implement? Thanks, Gianluca

4 6

OVN and change of mgmt network
by Gianluca Cecchi 27 Jan '21

27 Jan '21

Hello, I previously had OVN running on engine (as OVN provider with northd and northbound and southbound DBs) and hosts (with OVN controller). After changing mgmt ip of hosts (engine has retained instead the same ip), I executed again on them the command: vdsm-tool ovn-config <ip_of_engine> <nel_local_ip_of_host> Now I think I have to clean up some things, eg: 1) On engine where I get these lines below systemctl status ovn-northd.service -l . . . Sep 29 14:41:42 ovmgr1 ovsdb-server[940]: ovs|00005|reconnect|ERR|tcp: 10.4.167.40:37272: no response to inactivity probe after 5 seconds, disconnecting Oct 03 11:52:00 ovmgr1 ovsdb-server[940]: ovs|00006|reconnect|ERR|tcp: 10.4.167.41:52078: no response to inactivity probe after 5 seconds, disconnecting The two IPs are the old ones of two hosts It seems that a restart of the services has fixed... Can anyone confirm if I have to do anything else? 2) On hosts (there are 3 hosts with OVN on ip 10.4.192.32/33/34) where I currently have this output [root@ov301 ~]# ovs-vsctl show 3a38c5bb-0abf-493d-a2e6-345af8aedfe3 Bridge br-int fail_mode: secure Port "ovn-1dce5b-0" Interface "ovn-1dce5b-0" type: geneve options: {csum="true", key=flow, remote_ip="10.4.192.32"} Port "ovn-ddecf0-0" Interface "ovn-ddecf0-0" type: geneve options: {csum="true", key=flow, remote_ip="10.4.192.33"} Port "ovn-fd413b-0" Interface "ovn-fd413b-0" type: geneve options: {csum="true", key=flow, remote_ip="10.4.168.74"} Port br-int Interface br-int type: internal ovs_version: "2.7.2" [root@ov301 ~]# The IPs of kind 10.4.192.x are ok. But there is a left-over of an old host I initially used for tests, corresponding to 10.4.168.74, that now doesn't exist anymore How can I clean records for 1) and 2)? Thanks, Gianluca

3 4

deprecating export domain?
by Charles Kozler 30 Aug '20

30 Aug '20

Hello, I recently read on this list from a redhat member that export domain is either being deprecated or looking at being deprecated To that end, can you share details? Can you share any notes/postings/bz's that document this? I would imagine something like this would be discussed in larger audience This seems like a somewhat significant change to make and I am curious where this is scheduled? Currently, a lot of my backups rely explicitly on an export domain for online snapshots, so I'd like to plan accordingly Thanks!

11 21

Vm suddenly paused with error "vm has paused due to unknown storage error"
by Jasper Siero 18 Feb '20

18 Feb '20

Hi all, Since we upgraded our Ovirt nodes to CentOS 7 a vm (not a specific one but never more then one) will sometimes pause suddenly with the error "VM ... has paused due to unknown storage error". It happens now two times in a month. The Ovirt node uses san storage for the vm's running on it. When a specific vm is pausing with an error the other vm's keeps running without problems. The vm runs without problems after unpausing it. Versions: CentOS Linux release 7.1.1503 vdsm-4.14.17-0 libvirt-daemon-1.2.8-16 vdsm.log: VM Channels Listener::DEBUG::2015-10-25 07:43:54,382::vmChannels::95::vds::(_handle_timeouts) Timeout on fileno 78. libvirtEventLoop::INFO::2015-10-25 07:43:56,177::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother libvirtEventLoop::DEBUG::2015-10-25 07:43:56,178::vm::5204::vm.Vm::(_onLibvirtLifecycleEvent) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::event Suspended detail 2 opaque None libvirtEventLoop::INFO::2015-10-25 07:43:56,178::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother ........... libvirtEventLoop::INFO::2015-10-25 07:43:56,180::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother specific error part in libvirt vm log: block I/O error in device 'drive-virtio-disk0': Unknown error 32758 (32758) ........... block I/O error in device 'drive-virtio-disk0': Unknown error 32758 (32758) engine.log: 2015-10-25 07:44:48,945 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-40) [a43dcc8] VM diataal-prod-cas1 77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb moved from Up --> Paused 2015-10-25 07:44:49,003 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-40) [a43dcc8] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VM diataal-prod-cas1 has paused due to unknown storage error. Has anyone experienced the same problem or knows a way to solve this? Kind regards, Jasper

3 3

Unable to find OVF_STORE after recovery / upgrade
by Sam Cappello 26 May '19

26 May '19

This is a multi-part message in MIME format. --------------05F3D0780062C6D37C1619A7 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Hi, so i was running a 3.4 hosted engine two node setup on centos 6, had some disk issues so i tried to upgrade to centos 7 and follow the path 3.4 > 3.5 > 3.6 > 4.0. i screwed up dig time somewhere between 3.6 and 4.0, so i wiped the drives, installed a fresh 4.0.3, then created the database and restored the 3.6 engine backup before running engine-setup as per the docs. things seemed to work, but i have the the following issues / symptoms: - ovirt-ha-agent running 100% CPU on both nodes - messages in the UI that the Hosted Engine storage Domain isn't active and Failed to import the Hosted Engine Storage Domain - hosted engine is not visible in the UI and the following repeating in the agent.log: MainThread::INFO::2016-10-03 12:38:27,718::hosted_engine::461::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Current state EngineUp (score: 3400) MainThread::INFO::2016-10-03 12:38:27,720::hosted_engine::466::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Best remote host vmhost1.oracool.net (id: 1, score: 3400) MainThread::INFO::2016-10-03 12:38:37,979::states::421::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume) Engine vm running on localhost MainThread::INFO::2016-10-03 12:38:37,985::hosted_engine::612::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Initializing VDSM MainThread::INFO::2016-10-03 12:38:45,645::hosted_engine::639::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Connecting the storage MainThread::INFO::2016-10-03 12:38:45,647::storage_server::219::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2016-10-03 12:39:00,543::storage_server::226::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2016-10-03 12:39:00,562::storage_server::233::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Refreshing the storage domain MainThread::INFO::2016-10-03 12:39:01,235::hosted_engine::666::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Preparing images MainThread::INFO::2016-10-03 12:39:01,236::image::126::ovirt_hosted_engine_ha.lib.image.Image::(prepare_images) Preparing images MainThread::INFO::2016-10-03 12:39:09,295::hosted_engine::669::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Reloading vm.conf from the shared storage domain MainThread::INFO::2016-10-03 12:39:09,296::config::206::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Trying to get a fresher copy of vm configuration from the OVF_STORE MainThread::WARNING::2016-10-03 12:39:16,928::ovf_store::107::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan) Unable to find OVF_STORE MainThread::ERROR::2016-10-03 12:39:16,934::config::235::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Unable to get vm.conf from OVF_STORE, falling back to initial vm.conf I have searched a bit and not really found a solution, and have come to the conclusion that i have made a mess of things, and am wondering if the best solution is to export the VMs, and reinstall everything then import them back? i am using remote NFS storage. if i try and add the hosted engine storage domain it says it is already registered. i have also upgraded and am now running oVirt Engine Version: 4.0.4.4-1.el7.centos hosts were installed using ovirt-node. currently at 3.10.0-327.28.3.el7.x86_64 if a fresh install is best, any advice / pointer to doc that explains best way to do this? i have not moved my most important server over to this cluster yet so i can take some downtime to reinstall. thanks! sam --------------05F3D0780062C6D37C1619A7 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hi,<br> so i was running a 3.4 hosted engine two node setup on centos 6, had some disk issues so i tried to upgrade to centos 7 and follow the path 3.4 > 3.5 > 3.6 > 4.0. i screwed up dig time somewhere between 3.6 and 4.0, so i wiped the drives, installed a fresh 4.0.3, then created the database and restored the 3.6 engine backup before running engine-setup as per the docs. things seemed to work, but i have the the following issues / symptoms:<br> - ovirt-ha-agent running 100% CPU on both nodes<br> - messages in the UI that the Hosted Engine storage Domain isn't active and Failed to import the Hosted Engine Storage Domain<br> - hosted engine is not visible in the UI<br> and the following repeating in the agent.log:<br> <br> MainThread::INFO::2016-10-03 12:38:27,718::hosted_engine::461::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Current state EngineUp (score: 3400)<br> MainThread::INFO::2016-10-03 12:38:27,720::hosted_engine::466::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Best remote host vmhost1.oracool.net (id: 1, score: 3400)<br> MainThread::INFO::2016-10-03 12:38:37,979::states::421::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume) Engine vm running on localhost<br> MainThread::INFO::2016-10-03 12:38:37,985::hosted_engine::612::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Initializing VDSM<br> MainThread::INFO::2016-10-03 12:38:45,645::hosted_engine::639::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Connecting the storage<br> MainThread::INFO::2016-10-03 12:38:45,647::storage_server::219::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server<br> MainThread::INFO::2016-10-03 12:39:00,543::storage_server::226::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server<br> MainThread::INFO::2016-10-03 12:39:00,562::storage_server::233::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Refreshing the storage domain<br> MainThread::INFO::2016-10-03 12:39:01,235::hosted_engine::666::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Preparing images<br> MainThread::INFO::2016-10-03 12:39:01,236::image::126::ovirt_hosted_engine_ha.lib.image.Image::(prepare_images) Preparing images<br> MainThread::INFO::2016-10-03 12:39:09,295::hosted_engine::669::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Reloading vm.conf from the shared storage domain<br> MainThread::INFO::2016-10-03 12:39:09,296::config::206::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Trying to get a fresher copy of vm configuration from the OVF_STORE<br> MainThread::WARNING::2016-10-03 12:39:16,928::ovf_store::107::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan) Unable to find OVF_STORE<br> MainThread::ERROR::2016-10-03 12:39:16,934::config::235::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Unable to get vm.conf from OVF_STORE, falling back to initial vm.conf<br> <br> I have searched a bit and not really found a solution, and have come to the conclusion that i have made a mess of things, and am wondering if the best solution is to export the VMs, and reinstall everything then import them back?<br> i am using remote NFS storage.<br> if i try and add the hosted engine storage domain it says it is already registered.<br> i have also upgraded and am now running <span class="gwt-InlineLabel">oVirt Engine Version: 4.0.4.4-1.el7.centos<br> hosts were installed using ovirt-node. currently at 3.10.0-327.28.3.el7.x86_64<br> if a fresh install is best, any advice / pointer to doc that explains best way to do this?<br> i have not moved my most important server over to this cluster yet so i can take some downtime to reinstall.<br> thanks!<br> sam<br> <br> </span><br> </body> </html> --------------05F3D0780062C6D37C1619A7--

3 2

[Users] Problem Creating "oVirtEngine" Machine
by Richie＠HIP 15 May '19

15 May '19

--Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=windows-1252 I can't agree with you more. Modifying every box's or Virtual Machine's = HOSTS file with a FQDN and IP SHOULD work, but in my case it is not. = There are several reasons I've come to believe could be the problem = during my trial-and-errors testing and learning. FIRST - MACHINE IPs. THe machine's "Names" where not appearing in the Microsoft Active = Directory DHCP along with their assigned IPs; in other words, the DHCP = just showed an "Assigned IP", equal to the Linux Machine's IP, with a = <empty> ('i.e. blank, none, silch, plan old "no-letters-or-numbers") = "Name" in the "Name" (i.e. machines "network name", or FQDN-value used = by the Windows AD DNS-service) column. =20 if your IP is is appearing with an <empty> "name", there is no "host = name" to associate the IP, it makes it difficult to define a FQDN; which = isn't that useful if we're going to use the HOSTS files in all = participating machines in an oVirt Installation. I kept banging my head for three (3) long hours trying to find the = problem. In Fedora 18, I could't find where the "network name" of the machine = could be defined. =20 I tried putting the "Additional Search Domains" and/or "DHCP Client ID" = in Fedora's 18 Desktop - under "System Settings > Hardware > Network > = Options > IPv4 Setting" The DHCP went crazy; showing an "Aberrant-MAC-Address" (i.e. a really = long-sting value where the machine's MAC address should be), and we knew = the MAC address as we obtained using "ifconfig" on the machine getting = it's IP from the DHCP. So we reverted these entries from the = aforementioned, rebooted, and got an assigned IP, with proper MAC = address, but still no "Name" Kept wondering around the "Settings" and seeing which one made sense, = but what the heck, I went for it. =20 Under "System Settings > System > Details" I found the information about = GNOME and the machine's hardware. =20 There was a field for "Device Name" that originally had = "localhost.localdomain"; I changed the value to "ovirtmanager". and = under "Graphic" changed to "Forced Fallback Mode" to "ON". =20 I also installed all Kerberos libraries and client (i.e. authconfig-gtk, = authhub, authhub-client, krb5-apple-clents, krb5-auth-dialog, = krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) and rebooted VOILA=85!!! =20 I don;t know if it was the definition of "Device Name" from = "localhost.localdomain" to "ovirtengine", of the Kerberos libraries = install, or both. But finally the MS AD DHCP was showing the = Addigned-IP, the machine "Name" and the proper MAC-address. Regardless, = setting the machine's "Network Name" under "System Settings > System > = Details > Device Name", with no explanation of what "Device Name" meant = or was used for, was the last place I would have imagined this network = setting could be defined. NOTE - Somebody has to try the two steps I did together, separately. to = see which one is the real problem-solver; for me it is working, and "if = it ain't broke, don't fix it=85" Now that I have the DHCP / IP thing sorted, I have to do the DNS stuff. To this point, I've addressed the DHCP and "Network Name" of the = IP-Lease (required for the DNS to work). This still does't completely = explain why, by modifying the HOSTS file (allowing be to set and IP and = non-DNS FQDN). allows me to install the oVirtEngine "as long as I do not = use default HTTPd service parameters as suggested by the install". By = using the HOST file to "define" FQDNs, AND NOT using the default HTTPd = suggested changes, I'm able to install the oVirtEngine (given that I use = ports 8700 and 8701) to access the "oVirtEngine Welcome Screen", BUT = NONE of the "oVirt Portals" work=85 YET=85!!! More to come during the week Richie Jos=E9 E ("Richie") Piovanetti, MD, MS=20 M: 787-615-4884 | richiepiovanetti(a)healthcareinfopartners.com On Aug 2, 2013, at 3:10 AM, Joop <jvdwege(a)xs4all.nl> wrote: > Hello Ritchie, >=20 >> In a conversation via IRC, someone suggested that I activate = "dnsmask" to overcome what appears to be a DNS problem. I'll try that = other possibility once I get home later today. >>=20 >> In the mean time, what do you mean by "fixing the hostname"=85? I = opened and fixed the HOSTNAMES and changed it from = "localhost-localdomain" to "localhost.localdomain" and that made no = difference. Albeit, after changing I didm;t restart, remove ovirtEngine = ((using "engine-cleanup") and reinstalled via "engine-setup". Is that = what you mean=85? >>=20 >>=20 >>=20 >> In the mean time, the fact that even if I resolve the issue of = oVirtEngine I will not be able to connect to the oVirt Nodes unless I = have DNS resolution, apparently means I should do something with = resolving via DNS in my home LAN (i.e implement some sort of "DNS Cache" = so I can resolve my home computers via DNS inside my LAN). >>=20 >> Any suggestions are MORE THAN WELCOME=85!!! >> =20 >=20 > Having setup ovirt more than I can count right now I share your = feeling that it isn't always clear why things are going wrong, but in = this case I suspect that there is a rather small thing missing. > In short if you setup ovirt-engine, either using virtualbox or on real = hardware, and you give your host a meaningfull name AND you add that = info also in your /etc/hosts file than things SHOULD work, no need for = dnsmasq or even bind. Would make things easier once you start adding = virt hosts to you infrastructure since you will need to duplicate these = actions on each host (add engine name/ip to each host and add each host = to the others and all hosts to engine) >=20 > Just ask if you need more assistance and I will write down a small = howto that should work out of the box else I might have some time to see = if I can get things going. >=20 > Regards, >=20 > Joop >=20 --Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=windows-1252 <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html = charset=3Dwindows-1252"></head><body style=3D"word-wrap: break-word; = -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">I = can't agree with you more.  Modifying every box's or Virtual = Machine's HOSTS file with a FQDN and IP SHOULD work, but in my case it = is not.  There are several reasons I've come to believe could be = the problem during my trial-and-errors testing and = learning.<div><div><br></div><div>FIRST - MACHINE IPs.</div><ul = class=3D"MailOutline"><li>THe machine's "Names" where not appearing in = the <b>Microsoft Active Directory DHCP</b> along with their assigned = IPs; in other words, the DHCP just showed an "Assigned IP", equal to the = Linux Machine's IP, with a <empty> ('i.e. blank, none, silch, plan = old "no-letters-or-numbers") "Name" in the "Name" (i.e. machines = "network name", or FQDN-value used by the Windows AD DNS-service) = column.  </li><li>if your IP is is appearing with an <empty> = "name", there is no "host name" to associate the IP, it makes it = difficult to define a FQDN; which isn't that useful if we're going to = use the HOSTS files in all participating machines in an oVirt = Installation.</li><li>I kept banging my head for three (3) long hours = trying to find the problem.</li><ul><li>In Fedora 18, I could't find = where the "network name" of the machine could be defined. =  </li><li>I tried putting the "Additional Search Domains" and/or = "DHCP Client ID" in Fedora's 18 Desktop - under "System Settings > = Hardware > Network > Options > IPv4 Setting"</li><ul><li>The = DHCP went crazy;  showing an "Aberrant-MAC-Address" (i.e. a really = long-sting value where the machine's MAC address should be), and we knew = the MAC address as we obtained using "ifconfig" on the machine getting = it's IP from the DHCP.  So we reverted these entries from the = aforementioned, rebooted, and got an assigned IP, with proper MAC = address, but still no "Name"</li></ul><li>Kept wondering around the = "Settings" and seeing which one made sense, but what the heck, I went = for it.  </li><ul><li>Under "System Settings > System > = Details" I found the information about GNOME and the machine's hardware. =  </li><li>There was a field for "Device Name" that originally had = "localhost.localdomain"; I changed the value to "ovirtmanager". and = under "Graphic" changed to "Forced Fallback Mode" to "ON". =  </li><li>I also installed all Kerberos libraries and client (i.e. = authconfig-gtk, authhub, authhub-client, krb5-apple-clents, = krb5-auth-dialog, krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) = and rebooted</li><li>VOILA=85!!!  </li></ul><li>I don;t know if it = was the definition of "Device Name" from "localhost.localdomain" to = "ovirtengine", of the Kerberos libraries install, or both.  But = finally the MS AD DHCP was showing the Addigned-IP, the machine "Name" = and the proper MAC-address.  Regardless, setting the machine's = "Network Name" under "System Settings > System > Details = > Device Name", with no explanation of what "Device Name" meant = or was used for, was the last place I would have imagined this = network setting could be defined.</li><li><b>NOTE</b> - Somebody has to = try the two steps I did together, separately. to see which one is the = real problem-solver; for me it is working, and "if it ain't broke, don't = fix it=85"</li></ul></ul><div><br = class=3D"webkit-block-placeholder"></div><div>Now that I have the DHCP / = IP thing sorted, I have to do the DNS stuff.</div><div><br></div><div>To = this point, I've addressed the DHCP and "Network Name" of the IP-Lease = (required for the DNS to work).  This still does't completely = explain why, by modifying the HOSTS file (allowing be to set and IP and = non-DNS FQDN). allows me to install the oVirtEngine "<b><i>as long as I = do not use default  HTTPd service parameters as suggested by the = install</i></b>".  <b>By using the HOST file to "define" FQDNs, AND = NOT using the default HTTPd suggested changes, I'm able to install the = oVirtEngine (given that I use ports 8700 and 8701) to access the = "oVirtEngine Welcome Screen", BUT NONE of the "oVirt Portals" work</b>=85 = YET=85!!!</div><div><br></div><div>More to come during the = week</div><div><br></div><div>Richie</div><div = apple-content-edited=3D"true"><br>Jos=E9 E ("Richie") Piovanetti, MD, = MS <br>M: 787-615-4884 | <a = href=3D"mailto:richiepiovanetti@healthcareinfopartners.com">richiepiovanet= ti(a)healthcareinfopartners.com</a><br><br><br><br><br><br></div><br><div><d= iv>On Aug 2, 2013, at 3:10 AM, Joop <<a = href=3D"mailto:jvdwege@xs4all.nl">jvdwege(a)xs4all.nl</a>> = wrote:</div><br class=3D"Apple-interchange-newline"><blockquote = type=3D"cite">Hello Ritchie,<br><br><blockquote type=3D"cite">In a = conversation via IRC, someone suggested that I activate "dnsmask" to = overcome what appears to be a DNS problem.  I'll try that other = possibility once I get home later today.<br><br>In the mean time, what = do you mean by "fixing the hostname"=85?  I opened and fixed the = HOSTNAMES and changed it from "localhost-localdomain" to = "localhost.localdomain" and that made no difference.  Albeit, after = changing I didm;t restart, remove ovirtEngine ((using "engine-cleanup") = and reinstalled via "engine-setup".  Is that what you = mean=85?<br><br><br><br>In the mean time, the fact that even if I = resolve the issue of oVirtEngine I will not be able to connect to the = oVirt Nodes unless I have DNS resolution, apparently means I should do = something with resolving via DNS in my home LAN (i.e implement some sort = of "DNS Cache" so I can resolve my home computers via DNS inside my = LAN).<br><br>Any suggestions are MORE THAN WELCOME=85!!!<br> =  <br></blockquote><br>Having setup ovirt more than I can count = right now I share your feeling that it isn't always clear why things are = going wrong, but in this case I suspect that there is a rather small = thing missing.<br>In short if you setup ovirt-engine, either using = virtualbox or on real hardware, and you give your host a meaningfull = name AND you add that info also in your /etc/hosts file than things = SHOULD work, no need for dnsmasq or even bind. Would make things easier = once you start adding virt hosts to you infrastructure since you will = need to duplicate these actions on each host (add engine name/ip to each = host and add each host to the others and all hosts to = engine)<br><br>Just ask if you need more assistance and I will write = down a small howto that should work out of the box else I might have = some time to see if I can get things = going.<br><br>Regards,<br><br>Joop<br><br></blockquote></div><br></div></b= ody></html>= --Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241--

2 1

Re: [ovirt-users] Question about the ovirt-engine-sdk-java
by Michael Pasternak 15 May '19

15 May '19

------=_Part_1975902_834617789.1445161505459 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Hi=C2=A0Salifou, Actually java sdk is=C2=A0intentionally=C2=A0hiding transport level interna= ls so developers could stay in java domain,if your headers are static, easi= est way would be using reverse proxy in a middle to intercept requests,=C2= =A0 can you tell me why do you need this? =20 On Friday, October 16, 2015 1:14 AM, Salifou Sidi M. Malick <ssidimah@= redhat.com> wrote: =20 Hi Micheal, I have a question about the ovirt-engine-sdk-java. Is there a way to add custom request headers to each RHEVM API call? Here is an example of a request that I would like to do: $ curl -v -k \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "ID: user1(a)ad.xyz.com" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "PASSWORD: Pwssd" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "TARGET: kobe" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 https://vm0.smalick.com/api/hosts I would like to add ID, PASSWORD and TARGET as HTTP request header.=20 Thanks, Salifou ------=_Part_1975902_834617789.1445161505459 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable <html><head></head><body><div style=3D"color:#000; background-color:#fff; f= ont-family:HelveticaNeue-Light, Helvetica Neue Light, Helvetica Neue, Helve= tica, Arial, Lucida Grande, sans-serif;font-size:13px"><div id=3D"yui_3_16_= 0_1_1445160422533_3555" dir=3D"ltr"><span id=3D"yui_3_16_0_1_1445160422533_= 4552">Hi </span><span style=3D"font-family: 'Helvetica Neue', 'Segoe U= I', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"yui_3_16_0_1_1445= 160422533_3568" class=3D"">Salifou,</span></div><div id=3D"yui_3_16_0_1_144= 5160422533_3555" dir=3D"ltr"><span style=3D"font-family: 'Helvetica Neue', = 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" class=3D""><br>= </span></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span = style=3D"font-family: 'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Luci= da Grande', sans-serif;" class=3D"" id=3D"yui_3_16_0_1_1445160422533_3595">= Actually java sdk is </span><span style=3D"font-family: 'Helvetica Neu= e', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"yui_3= _16_0_1_1445160422533_4360" class=3D"">intentionally </span><span styl= e=3D"font-family: 'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Lucida G= rande', sans-serif;" id=3D"yui_3_16_0_1_1445160422533_4362" class=3D"">hidi= ng transport level internals so developers could stay in java domain,</span= ></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span class= =3D"" id=3D"yui_3_16_0_1_1445160422533_4435"><font face=3D"Helvetica Neue, = Segoe UI, Helvetica, Arial, Lucida Grande, sans-serif" id=3D"yui_3_16_0_1_1= 445160422533_4432" class=3D"">if your headers are static, easiest way would= be using reverse proxy in a middle to intercept requests, </font><br>= </span></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span = class=3D""><font face=3D"Helvetica Neue, Segoe UI, Helvetica, Arial, Lucida= Grande, sans-serif" class=3D""><br></font></span></div><div id=3D"yui_3_16= _0_1_1445160422533_3555" dir=3D"ltr"><span style=3D"font-family: 'Helvetica= Neue', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"y= ui_3_16_0_1_1445160422533_4357">can you tell me why do you need this?</span= ><br></div> <br><div class=3D"qtdSeparateBR"><br><br></div><div class=3D"y= ahoo_quoted" style=3D"display: block;"> <div style=3D"font-family: Helvetic= aNeue-Light, Helvetica Neue Light, Helvetica Neue, Helvetica, Arial, Lucida= Grande, sans-serif; font-size: 13px;"> <div style=3D"font-family: Helvetic= aNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-si= ze: 16px;"> <div dir=3D"ltr"> <font size=3D"2" face=3D"Arial"> On Friday, O= ctober 16, 2015 1:14 AM, Salifou Sidi M. Malick <ssidimah(a)redhat.com>= wrote:<br> </font> </div> <br><br> <div class=3D"y_msg_container">Hi Mich= eal,<br><br>I have a question about the ovirt-engine-sdk-java.<br><br>Is th= ere a way to add custom request headers to each RHEVM API call?<br><br>Here= is an example of a request that I would like to do:<br><br>$ curl -v -k \<= br>          -H "ID: <a ymailto=3D"mailto:user1@ad= .xyz.com" href=3D"mailto:user1@ad.xyz.com">user1(a)ad.xyz.com</a>" \<br>&nbsp= ;         -H "PASSWORD: Pwssd" \<br>    &nbsp= ;     -H "TARGET: kobe" \<br>          <= a href=3D"https://vm0.smalick.com/api/hosts" target=3D"_blank">https://vm0.= smalick.com/api/hosts</a><br><br><br>I would like to add ID, PASSWORD and T= ARGET as HTTP request header. <br><br>Thanks,<br>Salifou<br><br><br><br></d= iv> </div> </div> </div></div></body></html> ------=_Part_1975902_834617789.1445161505459--

2 1

[Users] oVirt Weekly Sync Meeting Minutes -- 2012-05-23
by Mike Burns 15 May '19

15 May '19

Minutes: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.html Minutes (text): http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.txt Log: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html ========================= #ovirt: oVirt Weekly Sync ========================= Meeting started by mburns at 14:00:23 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html . Meeting summary --------------- * agenda and roll call (mburns, 14:00:41) * Status of next release (mburns, 14:05:17) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822145 (mburns, 14:05:29) * AGREED: freeze date and beta release delayed by 1 week to 2012-06-07 (mburns, 14:12:33) * post freeze, release notes flag needs to be used where required (mburns, 14:14:21) * https://bugzilla.redhat.com/show_bug.cgi?id=821867 is a VDSM blocker for 3.1 (oschreib, 14:17:27) * ACTION: dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas (oschreib, 14:21:44) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822158 (mburns, 14:23:39) * assignee not available, update to come tomorrow (mburns, 14:24:59) * ACTION: oschreib to make sure BZ#822158 is handled quickly (oschreib, 14:25:29) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824397 (mburns, 14:28:55) * 824397 expected to be merged prior next week's meeting (mburns, 14:29:45) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824420 (mburns, 14:30:15) * tracker for node based on F17 (mburns, 14:30:28) * blocked by util-linux bug currently (mburns, 14:30:40) * new build expected from util-linux maintainer in next couple days (mburns, 14:30:55) * sub-project status -- engine (mburns, 14:32:49) * nothing to report outside of blockers discussed above (mburns, 14:34:00) * sub-project status -- vdsm (mburns, 14:34:09) * nothing outside of blockers above (mburns, 14:35:36) * sub-project status -- node (mburns, 14:35:43) * working on f17 migration, but blocked by util-linux bug (mburns, 14:35:58) * should be ready for freeze deadline (mburns, 14:36:23) * Review decision on Java 7 and Fedora jboss rpms in oVirt Engine (mburns, 14:36:43) * Java7 basically working (mburns, 14:37:19) * LINK: http://gerrit.ovirt.org/#change,4416 (oschreib, 14:39:35) * engine will make ack/nack statement next week (mburns, 14:39:49) * fedora jboss rpms patch is in review, short tests passed (mburns, 14:40:04) * engine ack on fedora jboss rpms and java7 needed next week (mburns, 14:44:47) * Upcoming Workshops (mburns, 14:45:11) * NetApp workshop set for Jan 22-24 2013 (mburns, 14:47:16) * already at half capacity for Workshop at LinuxCon Japan (mburns, 14:47:37) * please continue to promote it (mburns, 14:48:19) * proposal: board meeting to be held at all major workshops (mburns, 14:48:43) * LINK: http://www.ovirt.org/wiki/OVirt_Global_Workshops (mburns, 14:49:30) * Open Discussion (mburns, 14:50:12) * oVirt/Quantum integration discussion will be held separately (mburns, 14:50:43) Meeting ended at 14:52:47 UTC. Action Items ------------ * dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas * oschreib to make sure BZ#822158 is handled quickly Action Items, by person ----------------------- * dougsland * dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas * oschreib * oschreib to make sure BZ#822158 is handled quickly * **UNASSIGNED** * (none) People Present (lines said) --------------------------- * mburns (98) * oschreib (55) * doronf (12) * lh (11) * sgordon (8) * dougsland (8) * ovirtbot (6) * ofrenkel (4) * cestila (2) * RobertMdroid (2) * ydary (2) * rickyh (1) * yzaslavs (1) * cctrieloff (1) * mestery_ (1) * dustins (1) Generated by `MeetBot`_ 0.1.4 .. _`MeetBot`: http://wiki.debian.org/MeetBot

2 1

[QE][ACTION REQUIRED] oVirt 3.5.1 RC status - postponed
by Sandro Bonazzola 15 May '19

15 May '19

Hi, We have still blockers for oVirt 3.5.1 RC release so we need to postpone it until they'll be fixed. The bug tracker [1] shows 1 open blocker: Bug ID Whiteboard Status Summary 1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. - ACTION: Gilad please provide ETA on above blocker, the new proposed RC date will be decided on the given ETA. Maintainers: - Please be sure that 3.5 snapshot allow to create VMs - Please be sure that no pending patches are going to block the release - If any patch must block the RC release please raise the issue as soon as possible. There are still 57 bugs [2] targeted to 3.5.1. Excluding node and documentation bugs we still have 37 bugs [3] targeted to 3.5.1. Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed. - ACTION: Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1: it will ease gathering the blocking bugs for next releases. - ACTION: Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr [4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

2 1

VM has paused due to no storage space error
by Sandvik Agustin 15 May '19

15 May '19

Hi users, I have this problem that sometimes 1 to 3 VM just automatically paused with user interaction and getting this error "VM has paused due to no storage space error". any inputs from you guys are very appreciated. TIA Sandvik

5 5

VM Import from remote libvirt Server on web gui with Host key verification failed or permission denied error
by Rogério Ceni Coelho 15 May '19

15 May '19

Hi Ovirt Jedi´s !!! First of all, congratulations for this amazing product. I am an Vmware and Hyper-V Engineer but i am very excited with oVirt. Now, let´s go to work ... :-) I am trying to Import vm from remote libvirt server on web gui but i was unable to solve the problem until now. [image: pasted1] Node logs : [root@hlg-rbs-ovirt-kvm01-poa ~]# tail -f /var/log/vdsm/vdsm.log | grep -i error | grep -v Host.getStats jsonrpc.Executor/0::ERROR::2016-10-06 10:24:52,432::v2v::151::root::(get_external_vms) error connection to hypervisor: 'Cannot recv data: Permission denied, please try again.\r\nPermission denied, please try again.\r\nPermission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer' jsonrpc.Executor/0::INFO::2016-10-06 10:24:52,433::__init__::513::jsonrpc.JsonRpcServer::(_serveRequest) RPC call Host.getExternalVMs failed (error 65) in 10.05 seconds [root@hlg-rbs-ovirt-kvm02-poa ~]# grep error /var/log/vdsm/vdsm.log | grep get_external_vms jsonrpc.Executor/7::ERROR::2016-10-06 10:25:37,344::v2v::151::root::(get_external_vms) error connection to hypervisor: 'Cannot recv data: Host key verification failed.: Connection reset by peer' [root@hlg-rbs-ovirt-kvm02-poa ~]# Engine Logs : [root@hlg-rbs-ovirt01-poa ~]# tail -f /var/log/ovirt-engine/engine.log 2016-10-06 10:24:42,377 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] START, GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm01-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='5feddfba-d7b2-423e-a946-ac2bf36906fa', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'}), log id: eb750c7 *2016-10-06 10:24:53,435 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again.* *Permission denied, please try again.* *Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer]* 2016-10-06 10:24:53,435 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Failed in 'GetVmsFromExternalProviderVDS' method 2016-10-06 10:24:53,435 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer] 2016-10-06 10:24:53,454 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-97) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM hlg-rbs-ovirt-kvm01-poa.rbs.com.br command failed: Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer 2016-10-06 10:24:53,454 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@6c6f696c' 2016-10-06 10:24:53,454 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] HostName = hlg-rbs-ovirt-kvm01-poa.rbs.com.br 2016-10-06 10:24:53,454 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Command 'GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm01-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='5feddfba-d7b2-423e-a946-ac2bf36906fa', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'})' execution failed: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 2016-10-06 10:24:53,454 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id: eb750c7 2016-10-06 10:24:53,459 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-97) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: Failed to retrieve VMs information from external server qemu+ssh://root@prd-openshift-kvm03-poa.rbs.com.br/system 2016-10-06 10:24:53,459 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-97) [] Query 'GetVmsFromExternalProviderQuery' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) 2016-10-06 10:24:53,460 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-97) [] Exception: org.ovirt.engine.core.common.errors.EngineException: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103) [bll.jar:] at org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33) [dal.jar:] at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529) [bll.jar:] at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13) [bll.jar:] at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) [weld-core-impl-2.3.2.Final.jar:2.3.2.Final] at org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45) [wildfly-ee-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636) at org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195) at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73) at org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown Source) [common.jar:] at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53) at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196) at com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172) at com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233) at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129) at org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132) at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73) [branding.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84) at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62) at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36) at org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131) at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51) at io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46) at io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64) at io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56) at io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60) at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77) at io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50) at io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284) at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263) at io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81) at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174) at io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) at io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) [rt.jar:1.8.0_102] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) [rt.jar:1.8.0_102] at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102] 2016-10-06 10:25:27,202 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] START, GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm02-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='f9c9d929-b460-4102-bb29-de1e6ad6ad72', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'}), log id: 4f3174a6 *2016-10-06 10:25:38,338 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Host key verification failed.: Connection reset by peer]* 2016-10-06 10:25:38,338 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Failed in 'GetVmsFromExternalProviderVDS' method 2016-10-06 10:25:38,338 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Host key verification failed.: Connection reset by peer] 2016-10-06 10:25:38,343 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-113) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM hlg-rbs-ovirt-kvm02-poa.rbs.com.br command failed: Cannot recv data: Host key verification failed.: Connection reset by peer 2016-10-06 10:25:38,343 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@42dd60af' 2016-10-06 10:25:38,343 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] HostName = hlg-rbs-ovirt-kvm02-poa.rbs.com.br 2016-10-06 10:25:38,343 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Command 'GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm02-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='f9c9d929-b460-4102-bb29-de1e6ad6ad72', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'})' execution failed: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key verification failed.: Connection reset by peer, code = 65 2016-10-06 10:25:38,343 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id: 4f3174a6 2016-10-06 10:25:38,344 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-113) [] Query 'GetVmsFromExternalProviderQuery' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key verification failed.: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) 2016-10-06 10:25:38,345 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-113) [] Exception: org.ovirt.engine.core.common.errors.EngineException: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key verification failed.: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103) [bll.jar:] at org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33) [dal.jar:] at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529) [bll.jar:] at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13) [bll.jar:] at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) [weld-core-impl-2.3.2.Final.jar:2.3.2.Final] at org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45) [wildfly-ee-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636) at org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195) at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73) at org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown Source) [common.jar:] at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53) at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196) at com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172) at com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233) at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129) at org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132) at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73) [branding.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84) at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62) at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36) at org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131) at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51) at io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46) at io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64) at io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56) at io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60) at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77) at io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50) at io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284) at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263) at io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81) at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174) at io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) at io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) [rt.jar:1.8.0_102] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) [rt.jar:1.8.0_102] at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102] 2016-10-06 10:25:52,527 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] START, GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm03-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='02ead14e-0208-4a74-b1c2-4c19383820f9', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'}), log id: 7c8b1e2d 2016-10-06 10:26:02,695 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer] 2016-10-06 10:26:02,695 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Failed in 'GetVmsFromExternalProviderVDS' method 2016-10-06 10:26:02,696 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer] 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-118) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM hlg-rbs-ovirt-kvm03-poa.rbs.com.br command failed: Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer 2016-10-06 10:26:02,701 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@5ce9f7f2' 2016-10-06 10:26:02,701 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] HostName = hlg-rbs-ovirt-kvm03-poa.rbs.com.br 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Command 'GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm03-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='02ead14e-0208-4a74-b1c2-4c19383820f9', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'})' execution failed: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 2016-10-06 10:26:02,701 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id: 7c8b1e2d 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-118) [] Query 'GetVmsFromExternalProviderQuery' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-118) [] Exception: org.ovirt.engine.core.common.errors.EngineException: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103) [bll.jar:] at org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33) [dal.jar:] at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529) [bll.jar:] at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13) [bll.jar:] at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) [weld-core-impl-2.3.2.Final.jar:2.3.2.Final] at org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45) [wildfly-ee-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636) at org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195) at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73) at org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown Source) [common.jar:] at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53) at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196) at com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172) at com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233) at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129) at org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132) at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73) [branding.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84) at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62) at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36) at org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131) at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51) at io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46) at io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64) at io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56) at io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60) at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77) at io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50) at io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284) at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263) at io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81) at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174) at io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) at io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) [rt.jar:1.8.0_102] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) [rt.jar:1.8.0_102] at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102] ^C [root@hlg-rbs-ovirt01-poa ~]# When i try with virsh i have sucess. [root@hlg-rbs-ovirt-kvm01-poa ~]# virsh -c qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system The authenticity of host 'prd-openshift-kvm03-poa.rbs.com.br (10.1.8.32)' can't be established. ECDSA key fingerprint is af:e9:12:29:65:ad:41:ab:0a:3c:a1:f0:73:1c:62:a5. Are you sure you want to continue connecting (yes/no)? yes root(a)prd-openshift-kvm03-poa.rbs.com.br's password: Welcome to virsh, the virtualization interactive terminal. Type: 'help' for help with commands 'quit' to quit virsh # list Id Name State ---------------------------------------------------- 5 prd-openshift-etcd03-poa running 6 prd-openshift-master03-poa running 8 prd-openshift-node03-poa running virsh # list --all Id Name State ---------------------------------------------------- 5 prd-openshift-etcd03-poa running 6 prd-openshift-master03-poa running 8 prd-openshift-node03-poa running - teste shut off - teste1 shut off - tpl-centos72-64 shut off virsh # quit [root@hlg-rbs-ovirt-kvm01-poa ~]# Thanks.

3 2

Libvirt ERROR cannot access backing file after importing VM from OpenStack
by Vrgotic, Marko 15 May '19

15 May '19

Dear oVirt team, When trying to start imported VM, it fails with following message: ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-2) [] EVENT_ID: VM_DOWN_ERROR(119), VM instance-00000673 is down with error. Exit message: Cannot access backing file '/var/lib/nova/instances/_base/2f4f8c5fc11bb83bcab03f4c829ddda4da8c0bce' of storage file '/rhev/data-center/mnt/glusterSD/aws-gfs-01.awesome.lan:_gv0__he/2607c265-248c-40ad-b020-f3756454839e/images/816ac00f-ba98-4827-b5c8-42a8ba496089/8ecfcd5b-db67-4c23-9869-0e20d7553aba' (as uid:107, gid:107): No such file or directory. Platform details: Ovirt SHE Version 4.2.2.6-1.el7.centos GlusterFS, unmanaged by oVirt. VM is imported & converted from OpenStack, according to log files, successfully (one WARN, related to different MAC address): 2018-05-24 12:03:31,028+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsNamesFromExternalProviderVDSCommand] (default task-29) [cc5931a2-1af5-4d65-b0b3-362588db9d3f] FINISH, GetVmsNamesFromExternalProviderVDSCommand, return: [VM [instance-0001f94c], VM [instance-00078f6a], VM [instance-00000814], VM [instance-0001f9ac], VM [instance-000001ff], VM [instance-0001f718], VM [instance-00000673], VM [instance-0001ecf2], VM [instance-00078d38]], log id: 7f178a5e 2018-05-24 12:48:33,722+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsNamesFromExternalProviderVDSCommand] (default task-8) [103d56e1-7449-4853-ae50-48ee94d43d77] FINISH, GetVmsNamesFromExternalProviderVDSCommand, return: [VM [instance-0001f94c], VM [instance-00078f6a], VM [instance-00000814], VM [instance-0001f9ac], VM [instance-000001ff], VM [instance-0001f718], VM [instance-00000673], VM [instance-0001ecf2], VM [instance-00078d38]], log id: 3aa178c5 2018-05-24 12:48:47,291+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFullInfoFromExternalProviderVDSCommand] (default task-17) [4bf555c7-9d64-4ecc-b059-8a60a4b27bdd] START, GetVmsFullInfoFromExternalProviderVDSCommand(HostName = aws-ovhv-01, GetVmsFromExternalProviderParameters:{hostId='cbabe1e8-9e7f-4c4b-be9c-49154953564d', url='qemu+tcp://root@172.19.0.12/system', username='null', originType='KVM', namesOfVms='[instance-00000673]'}), log id: 4c445109 2018-05-24 12:48:47,318+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFullInfoFromExternalProviderVDSCommand] (default task-17) [4bf555c7-9d64-4ecc-b059-8a60a4b27bdd] FINISH, GetVmsFullInfoFromExternalProviderVDSCommand, return: [VM [instance-00000673]], log id: 4c445109 2018-05-24 12:49:20,466+02 INFO [org.ovirt.engine.core.bll.exportimport.ImportVmFromExternalProviderCommand] (default task-41) [14edb003-b4a0-4355-b3de-da2b68774fe3] Lock Acquired to object 'EngineLock:{exclusiveLocks='[instance-00000673=VM_NAME, 1f0b608f-7cfc-4b27-a876-b5d8073011a1=VM]', sharedLocks=''}' 2018-05-24 12:49:20,586+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653408) [14edb003-b4a0-4355-b3de-da2b68774fe3] EVENT_ID: MAC_ADDRESS_IS_EXTERNAL(925), VM instance-00000673 has MAC address(es) fa:16:3e:74:18:50, which is/are out of its MAC pool definitions. 2018-05-24 12:49:21,021+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653408) [14edb003-b4a0-4355-b3de-da2b68774fe3] EVENT_ID: IMPORTEXPORT_STARTING_IMPORT_VM(1,165), Starting to import Vm instance-00000673 to Data Center AVEUNL, Cluster AWSEUOPS 2018-05-24 12:49:28,816+02 INFO [org.ovirt.engine.core.bll.exportimport.ImportVmFromExternalProviderCommand] (EE-ManagedThreadFactory-engine-Thread-653407) [] Lock freed to object 'EngineLock:{exclusiveLocks='[instance-00000673=VM_NAME, 1f0b608f-7cfc-4b27-a876-b5d8073011a1=VM]', sharedLocks=''}' 2018-05-24 12:49:28,911+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ConvertVmVDSCommand] (EE-ManagedThreadFactory-commandCoordinator-Thread-2) [2047673e] START, ConvertVmVDSCommand(HostName = aws-ovhv-01, ConvertVmVDSParameters:{hostId='cbabe1e8-9e7f-4c4b-be9c-49154953564d', url='qemu+tcp://root@172.19.0.12/system', username='null', vmId='1f0b608f-7cfc-4b27-a876-b5d8073011a1', vmName='instance-00000673', storageDomainId='2607c265-248c-40ad-b020-f3756454839e', storagePoolId='5a5de92c-0120-0167-03cb-00000000038a', virtioIsoPath='null', compatVersion='null', Disk0='816ac00f-ba98-4827-b5c8-42a8ba496089'}), log id: 53408517 2018-05-24 12:49:29,010+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-commandCoordinator-Thread-2) [2047673e] EVENT_ID: IMPORTEXPORT_STARTING_CONVERT_VM(1,193), Starting to convert Vm instance-00000673 2018-05-24 12:52:57,982+02 INFO [org.ovirt.engine.core.bll.UpdateVmCommand] (default task-16) [df1d5f72-eb17-46e4-9946-20ca9809b54c] Failed to Acquire Lock to object 'EngineLock:{exclusiveLocks='[instance-00000673=VM_NAME]', sharedLocks='[1f0b608f-7cfc-4b27-a876-b5d8073011a1=VM]'}' 2018-05-24 12:59:24,575+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-20) [2047673e] EVENT_ID: IMPORTEXPORT_IMPORT_VM(1,152), Vm instance-00000673 was imported successfully to Data Center AVEUNL, Cluster AWSEUOPS Than trying to start VM fails with following messages: 2018-05-24 13:00:32,085+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653729) [] EVENT_ID: USER_STARTED_VM(153), VM instance-00000673 was started by admin@internal-authz (Host: aws-ovhv-06). 2018-05-24 13:00:33,417+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-9) [] VM '1f0b608f-7cfc-4b27-a876-b5d8073011a1'(instance-00000673) moved from 'WaitForLaunch' --> 'Down' 2018-05-24 13:00:33,436+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-9) [] EVENT_ID: VM_DOWN_ERROR(119), VM instance-00000673 is down with error. Exit message: Cannot access backing file '/var/lib/nova/instances/_base/2f4f8c5fc11bb83bcab03f4c829ddda4da8c0bce' of storage file '/rhev/data-center/mnt/glusterSD/aws-gfs-01.awesome.lan:_gv0__he/2607c265-248c-40ad-b020-f3756454839e/images/816ac00f-ba98-4827-b5c8-42a8ba496089/8ecfcd5b-db67-4c23-9869-0e20d7553aba' (as uid:107, gid:107): No such file or directory. 2018-05-24 13:00:33,437+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-9) [] add VM '1f0b608f-7cfc-4b27-a876-b5d8073011a1'(instance-00000673) to rerun treatment 2018-05-24 13:00:33,455+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653732) [] EVENT_ID: USER_INITIATED_RUN_VM_FAILED(151), Failed to run VM instance-00000673 on Host aws-ovhv-06. 2018-05-24 13:00:33,460+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653732) [] EVENT_ID: USER_FAILED_RUN_VM(54), Failed to run VM instance-00000673 (User: admin@internal-authz). Checking on the Gluster volume, directory and files exist, permissions are in order: [root@aws-ovhv-01 816ac00f-ba98-4827-b5c8-42a8ba496089] -rw-rw----. 1 vdsm kvm 14G May 24 12:59 8ecfcd5b-db67-4c23-9869-0e20d7553aba -rw-rw----. 1 vdsm kvm 1.0M May 24 12:49 8ecfcd5b-db67-4c23-9869-0e20d7553aba.lease -rw-r--r--. 1 vdsm kvm 310 May 24 12:49 8ecfcd5b-db67-4c23-9869-0e20d7553aba.meta Than I have checked image info, and noticed that backing file entry is pointing to non-existing location, which does and should not exist on oVirt hosts: [root@aws-ovhv-01 816ac00f-ba98-4827-b5c8-42a8ba496089]# qemu-img info 8ecfcd5b-db67-4c23-9869-0e20d7553aba image: 8ecfcd5b-db67-4c23-9869-0e20d7553aba file format: qcow2 virtual size: 160G (171798691840 bytes) disk size: 14G cluster_size: 65536 backing file: /var/lib/nova/instances/_base/2f4f8c5fc11bb83bcab03f4c829ddda4da8c0bce Format specific information: compat: 1.1 lazy refcounts: false refcount bits: 16 corrupt: false Can somebody advise me how to fix, address this, as I am in need of importing 200+ VMs from OpenStack to oVirt? Kindly awaiting your reply. Marko Vrgotic

7 36

Change host names/IPs
by Davide Ferrari 15 May '19

15 May '19

Hello Is there a clean way and possibly without downtime to change the hostname and IP addresses of all the hosts in a running oVirt cluster? -- Davide Ferrari Senior Systems Engineer

4 7

[Users] Lifecycle / upgradepath
by Sven Kieske 11 May '19

11 May '19

Hi Community, Currently, there is no single document describing supported (which means: working ) upgrade scenarios. I think the project has matured enough, to have such an supported upgradepath, which should be considered in the development of new releases. As far as I know, currently it is supported to upgrade from x.y.z to x.y.z+1 and from x.y.z to x.y+1.z but not from x.y-1.z to x.y+1.z directly. maybe this should be put together in a wiki page at least. also it would be cool to know how long a single "release" would be supported. In this context I would define a release as a version bump from x.y.z to x.y+1.z or to x+1.y.z a bump in z would be a bugfix release. The question is, how long will we get bugfix releases for a given version? What are your thoughts? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

2 1

[Users] Nested virtualization with Opteron 2nd generation and oVirt 3.1 possible?
by Gianluca Cecchi 11 May '19

11 May '19

Hello, I have 2 physical servers with Opteron 2nd gen cpu. There is CentOS 6.3 installed and some VM already configured on them. Their /proc/cpuinfo contains ... model name : Dual-Core AMD Opteron(tm) Processor 8222 ... kvm_amd kernel module is loaded with its default enabled nested option # systool -m kvm_amd -v Module = "kvm_amd" Attributes: initstate = "live" refcnt = "15" srcversion = "43D8067144E7D8B0D53D46E" Parameters: nested = "1" npt = "1" ... I already configured a fedora 17 VM as a oVirt 3.1 Engine I'm trying to configure another VM as oVirt 3.1 node with ovirt-node-iso-2.5.5-0.1.fc17.iso It seems I'm not able to configure so that ovirt install doesn't complain. After some attempts, I tried this in my vm.xml for the cpu: <cpu mode='custom' match='exact'> <model fallback='allow'>athlon</model> <vendor>AMD</vendor> <feature policy='require' name='pni'/> <feature policy='require' name='rdtscp'/> <feature policy='force' name='svm'/> <feature policy='require' name='clflush'/> <feature policy='require' name='syscall'/> <feature policy='require' name='lm'/> <feature policy='require' name='cr8legacy'/> <feature policy='require' name='ht'/> <feature policy='require' name='lahf_lm'/> <feature policy='require' name='fxsr_opt'/> <feature policy='require' name='cx16'/> <feature policy='require' name='extapic'/> <feature policy='require' name='mca'/> <feature policy='require' name='cmp_legacy'/> </cpu> Inside node /proc/cpuinfo becomes processor : 3 vendor_id : AuthenticAMD cpu family : 6 model : 2 model name : QEMU Virtual CPU version 0.12.1 stepping : 3 microcode : 0x1000065 cpu MHz : 3013.706 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall mmxext fxsr_opt lm nopl pni cx16 hypervisor lahf_lm cmp_legacy cr8_legacy bogomips : 6027.41 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: 2 questions: 1) Is there any combination in xml file to give to my VM so that oVirt doesn't complain about missing hardware virtualization with this processor? 2) suppose 1) is not possible in my case and I still want to test the interface and try some config operations to see for example the differences with RHEV 3.0, how can I do? At the moment this complaint about hw virtualization prevents me to activate the node. I get Installing Host f17ovn01. Step: RHEV_INSTALL. Host f17ovn01 was successfully approved. Host f17ovn01 running without virtualization hardware acceleration Detected new Host f17ovn01. Host state was set to Non Operational. Host f17ovn01 moved to Non-Operational state. Host f17ovn01 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags Can I lower the requirements to be able to operate without hw virtualization in 3.1? Thanks in advance, Gianluca

2 1

Need VM run once api
by Chandrahasa S 09 May '19

09 May '19

This is a multipart message in MIME format. --=_alternative 00361B2065257E90_= Content-Type: text/plain; charset="US-ASCII" Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00361B2065257E90_= Content-Type: text/html; charset="US-ASCII" <font size=2 face="sans-serif">Hi Experts,</font> <br> <br><font size=2 face="sans-serif">We are integrating ovirt with our internal cloud.</font> <br> <br><font size=2 face="sans-serif">Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS.</font> <br> <br><font size=2 face="sans-serif">but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal.</font> <br> <br><font size=2 face="sans-serif">I believe we need to power ON vm using run once API, but we are not able get this API.</font> <br> <br><font size=2 face="sans-serif">Can some one help on this.</font> <br> <br><font size=2 face="sans-serif">I got reply on this query last time but unfortunately mail got deleted.</font> <br> <br><font size=2 face="sans-serif">Thanks & Regards<br> Chandrahasa S<br> </font><p>=====-----=====-----=====<br> Notice: The information contained in this e-mail<br> message and/or attachments to it may contain <br> confidential or privileged information. If you are <br> not the intended recipient, any dissemination, use, <br> review, distribution, printing or copying of the <br> information contained in this e-mail message <br> and/or attachments to it are strictly prohibited. If <br> you have received this communication in error, <br> please notify us by reply e-mail or telephone and <br> immediately and permanently delete the message <br> and any attachments. Thank you</p> <p></p> --=_alternative 00361B2065257E90_=--

5 4

[Users] importing from kvm into ovirt
by Jonathan Horne 29 Apr '19

29 Apr '19

--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable I need to import a kvm virtual machine from a standalone kvm into my ovirt = cluster. Standalone is using local storage, and my ovirt cluster is using = iscsi. Can i please have some advice on whats the best way to get this sys= tem into ovirt? Right now i see it as copying the .img file to somewhere=85 but i have no i= dea where to start. I found this directory on one of my ovirt nodes: /rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/master/v= ms But inside is just directories that appear to have uuid-type of names, and = i can't tell what belongs to which vm. Any advice would be greatly appreciated. Thanks, jonathan ________________________________ This is a PRIVATE message. If you are not the intended recipient, please de= lete without copying and kindly advise us by e-mail of the mistake in deliv= ery. NOTE: Regardless of content, this e-mail shall not operate to bind SKO= POS to any order or other contract unless pursuant to explicit written agre= ement or government initiative expressly permitting the use of e-mail for s= uch purpose. --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/html; charset="Windows-1252" Content-ID: <41FAB2B157C43549B6577A3495BA255C(a)collaborationhost.net> Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1= 252"> </head> <body style=3D"word-wrap:break-word; color:rgb(0,0,0); font-size:14px; font= -family:Calibri,sans-serif"> <div> <div> <div>I need to import a kvm virtual machine from a standalone kvm into my o= virt cluster.  Standalone is using local storage, and my ovirt cluster= is using iscsi.  Can i please have some advice on whats the best way = to get this system into ovirt?</div> </div> </div> <div><br> </div> <div>Right now i see it as copying the .img file to somewhere=85 but i have= no idea where to start.  I found this directory on one of my ovirt no= des:</div> <div><br> </div> <div>/rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/mas= ter/vms</div> <div><br> </div> <div>But inside is just directories that appear to have uuid-type of names,= and i can't tell what belongs to which vm.</div> <div><br> </div> <div>Any advice would be greatly appreciated.</div> <div><br> </div> <div>Thanks,</div> <div>jonathan</div> <br> <hr> <font color=3D"Gray" face=3D"Arial" size=3D"1">This is a PRIVATE message. I= f you are not the intended recipient, please delete without copying and kin= dly advise us by e-mail of the mistake in delivery. NOTE: Regardless of con= tent, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit wri= tten agreement or government initiative expressly permitting the use of e-m= ail for such purpose.</font> </body> </html> --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_--

3 2

Trying to reset password for ovirt wiki
by noc 08 Apr '19

08 Apr '19

This is a multi-part message in MIME format. --------------000005070002050708050606 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hoping someone can help me out. For some reason I keep getting the following error when I try to reset my password: Reset password * Error sending mail: Failed to add recipient: jvandewege(a)nieuwland.nl [SMTP: Invalid response code received from server (code: 554, response: 5.7.1 <jvandewege(a)nieuwland.nl>: Relay access denied)] Complete this form to receive an e-mail reminder of your account details. Since I receive the ML on this address it is definitely a working address. Tried my home account too and same error but then for my home provider, Relay denied ?? A puzzled user, Joop --------------000005070002050708050606 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hoping someone can help me out.<br> For some reason I keep getting the following error when I try to reset my password:<br> <br> <fieldset><legend>Reset password</legend> <div class="error"> <ul> <li>Error sending mail: Failed to add recipient: <a class="moz-txt-link-abbreviated" href="mailto:jvandewege@nieuwland.nl">jvandewege(a)nieuwland.nl</a> [SMTP: Invalid response code received from server (code: 554, response: 5.7.1 <a class="moz-txt-link-rfc2396E" href="mailto:jvandewege@nieuwland.nl"><jvandewege(a)nieuwland.nl></a>: Relay access denied)]</li> </ul> </div> <p>Complete this form to receive an e-mail reminder of your account details.<br> </p> </fieldset> <br> Since I receive the ML on this address it is definitely a working address.<br> Tried my home account too and same error but then for my home provider, Relay denied ??<br> <br> A puzzled user,<br> <br> Joop<br> <br> </body> </html> --------------000005070002050708050606--

2 1

ovirt-guest-agent issue on rhel5.5
by John Michael Mercado 08 Apr '19

08 Apr '19

Hi All, I need your help. Anyone who encounter the below error and have the solution? Can you help me how to fix this? MainThread::INFO::2015-01-27 10:22:53,247::ovirt-guest-agent::57::root::Starting oVirt guest agent MainThread::ERROR::2015-01-27 10:22:53,248::ovirt-guest-agent::138::root::Unhandled exception in oVirt guest agent! Traceback (most recent call last): File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 132, in ? agent.run(daemon, pidfile) File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 63, in run self.agent = LinuxVdsAgent(config) File "/usr/share/ovirt-guest-agent/GuestAgentLinux2.py", line 371, in __init__ AgentLogicBase.__init__(self, config) File "/usr/share/ovirt-guest-agent/OVirtAgentLogic.py", line 171, in __init__ self.vio = VirtIoChannel(config.get("virtio", "device")) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 150, in __init__ self._stream = VirtIoStream(vport_name) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 131, in __init__ self._vport = os.open(vport_name, os.O_RDWR) OSError: [Errno 2] No such file or directory: '/dev/virtio-ports/com.redhat.rhevm.vdsm' Thanks

2 1

[Users] oVirt Workshop at LinuxCon Japan 2012
by Leslie Hawthorn 08 Apr '19

08 Apr '19

Hello everyone, As part of our efforts to raise awareness of and educate more developers about the oVirt project, we will be holding an oVirt workshop at LinuxCon Japan, taking place on June 8, 2012. You can find full details of the workshop agenda on the LinuxCon Japan site. [0] Registration for the workshop is now open and is free of charge for the first 50 participants. We will also look at adding additional participant slots to the workshop based on demand. Attendees who register for LinuxCon Japan via the workshop registration link [1] will also be eligible for a discount on their LinuxCon Japan registration. Please spread the word to folks you think would find the workshop useful. If they have already registered for LinuxCon Japan, they can simply edit their existing registration to include the workshop. [0] - https://events.linuxfoundation.org/events/linuxcon-japan/ovirt-gluster-work… [1] - http://www.regonline.com/Register/Checkin.aspx?EventID=1099949 Cheers, LH -- Leslie Hawthorn Community Action and Impact Open Source and Standards @ Red Hat identi.ca/lh twitter.com/lhawthorn

2 1

[Users] Moving iSCSI Master Data
by rni＠chef.net 07 Apr '19

07 Apr '19

--========GMXBoundary282021374122634158505 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Hi, it's me again.... I started my oVirt 'project' as a proof of concept,.. but it happend as always, it became production Now, I've to move the iSCSI Master data to the real iSCSI traget. Is there any way to do this, and to become rid of the old Master Data? Thank you for your help Hans-Joachim --========GMXBoundary282021374122634158505 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable <span style=3D'font-family:Verdana'><span style=3D'font-size:12px'>Hi,<br /= ><br />it's me again....<br /><br />I started my oVirt 'project' as a proof= of concept,.. but it happend as always, it became production <img alt= =3D" " title=3D" " src=3D"http://images.gmx.com/images/outsource/applicatio= n/mailclient/mailcom/resource/mailclient/icons/blue/emoticons/animated/S_02= -516742918.gif" /><br /><br />Now, I've to move the iSCSI Master data to th= e real iSCSI traget.<br />Is there any way to do this, and to become rid of= the old Master Data?<br /><br /><span id=3D"editor_signature">Thank you fo= r your help</span><br /><br />Hans-Joachim</span></span> --========GMXBoundary282021374122634158505--

3 2

[Users] Can't access RHEV-H aka ovirt-node
by Scotto Alberto 11 Mar '19

11 Mar '19

--_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: multipart/alternative; boundary="_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_" --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi all, I can't login to the hypervisor, neither as root nor as admin, neither from= another computer via ssh nor directly on the machine. I'm sure I remember the passwords. This is not the first time it happens: l= ast time I reinstalled the host. Everything worked ok for about 2 weeks, an= d then... What's going on? Is it a known behavior, somehow? Before rebooting the hypervisor, I would like to try something. RHEV Manage= r talks to RHEV-H without any problems. Can I login with RHEV-M's keys? how= ? Thank you all. Alberto Scotto [Blue] Via Cardinal Massaia, 83 10147 - Torino - ITALY phone: +39 011 29100 al.scotto(a)reply.it www.reply.it ________________________________ -- The information transmitted is intended for the person or entity to which i= t is addressed and may contain confidential and/or privileged material. Any= review, retransmission, dissemination or other use of, or taking of any ac= tion in reliance upon, this information by persons or entities other than t= he intended recipient is prohibited. If you received this in error, please = contact the sender and delete the material from any computer. --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <style>  </style> </head> <body lang=3D"IT" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> <p class=3D"MsoNormal"><span lang=3D"EN-US">Hi all,</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">I can’t login to the hype= rvisor, neither as root nor as admin, neither from another computer via ssh= nor directly on the machine.</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">I’m sure I remember the p= asswords. This is not the first time it happens: last time I reinstalled th= e host. Everything worked ok for about 2 weeks, and then...</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">What’s going on? Is it a = known behavior, somehow?</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">Before rebooting the hypervisor= , I would like to try something. RHEV Manager talks to RHEV-H without any p= roblems. Can I login with RHEV-M’s keys? how?</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US"> </span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">Thank you all.</span></p> </div> <br> <br> <div align=3D"left"> <p style=3D"font-family:Calibri,Sans-Serif; font-size:10pt"><span style=3D"= color:#000000; font-weight:bold">Alberto Scotto</span> <span style=3D"color:#808080"></span><br> <br> <span style=3D"color:#000000"><img border=3D"0" alt=3D"Blue" src=3D"cid:bde= 5ac62d10545908e269a6006dbd5ac" style=3D"margin:0px"> </span><br> <span style=3D"color:#808080">Via Cardinal Massaia, 83<br> 10147 - Torino - ITALY <br> phone: +39 011 29100 <br> <a href=3D"al.scotto(a)reply.it" target=3D"" style=3D"color:blue; text-decora= tion:underline">al.scotto(a)reply.it</a> <br> <a title=3D"" href=3D"www.reply.it" target=3D"" style=3D"color:blue; text-d= ecoration:underline">www.reply.it</a> </span><br>  </p> </div> <br> <hr> <font face=3D"Arial" color=3D"Gray" size=3D"1"><br> --<br> The information transmitted is intended for the person or entity to which i= t is addressed and may contain confidential and/or privileged material. Any= review, retransmission, dissemination or other use of, or taking of any ac= tion in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If= you received this in error, please contact the sender and delete the mater= ial from any computer.<br> </font> </body> </html> --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_-- --_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: image/png; name="blue.png" Content-Description: blue.png Content-Disposition: inline; filename="blue.png"; size=2834; creation-date="Tue, 11 Sep 2012 14:14:44 GMT"; modification-date="Tue, 11 Sep 2012 14:14:44 GMT" Content-ID: <bde5ac62d10545908e269a6006dbd5ac> Content-Transfer-Encoding: base64 iVBORw0KGgoAAAANSUhEUgAAAIwAAAAyCAYAAACOADM7AAAABmJLR0QA/gD+AP7rGNSCAAAACXBI WXMAAA3XAAAN1wFCKJt4AAAACXZwQWcAAACMAAAAMgCR0D3bAAAKaUlEQVR42u2ce5AUxRnAf313 3Al4eCAYFaIgyMNEUF6KlYoVIDBArDxqopWxQgViQlWsPHA0MUlZVoyKRsdSE4lGomjIaHS0UlHL wTIPpEgQFQUUjYIWdfIIScyBHi/Z6/zRM1xP3yzs7t3unOX8qra2H9M9vb3f9Pf19/WukFKSk1Mq dVkPIOejRS4wOWXR6wVGuP5I4foDsh5HjkL0VhtGuP5A4CFgNrAD+Lb0nKeyHtfHnd68wixGCQvA qcA9wvWPy3pQH3caan1D4fonAYeBDwEZjaFflAaok56zHRhsNG0B+gAHSrhHarn0nFp/3NLnxbKP B06I5kECO2UYZD2sLtRcYIBJwK+BoYBACU89cAjoAIRw/TuAJcClQGy//FJ6zvvH6ly4/qXAz4vU HQA2A4H0nIcz+OxH41eAHaU3AhdkPaA0MrFhhOuPB2YA5wBnA6ehni5dgKcBu4C5wLZS7Rfh+g8A 80u49HHgEuk5h2s+AeaYLbsO2AKMiIqWyzBYkPW40shihUF6zkbUUwSAcP0G4FHgS9pl10rPmQMs LbXfSBVNLPHyrwDfBO7JYg4MRqEempjnsh5QMXqL0Xsl8EUt3w5cXUE/w4AztfzzwGSUGrwoyuvM yfqDR5yLUssxL2U9oGJkssLoCNdfjLJXdBZIz9lQQXcTgSYt/4z0nHjy1wvX3wW8oNX3O8q4TgKm AGegjNB/As9JzzmYer1lTwKGoOyyV2UYtArLngLMQ9lh64EVRQxZ3V5pje4V9zsVGBRl22QYrDXu e0HUvwD+K8NgXbe/lKOQqcAI178MuM0ovk16zqMVdjnNyL9g5E2DrTVlTP1RRvM3gIFG9RvC9RdK z/lHoo2yQQJgeFR0hbDsT6FUns544Icp456qpV+RYaAL5RJgepR+FWXzxfcdA6zRrr0SqKrAZKaS hOt/DbjXKH5Geo7bjW71iT8AvGLUzzXyfzfGNBBlPyymq7AAjAWeFK5/slE+AvhklC4At6KEZb9x 3cJo+9x5T8s+ERinFa012uzU0vuMuu9r6W3AXd2Yu5LIRGCE618E/D6l6rpu9Hk8MEEr2iQ9p1Wr n4wShJgPgCeMbh6g02jeB9wILASe1q4ZBHzBaDeRThukHghRdskoQF+NmlH+JJ0JqB1ijCkw72np jiOfx7JPQrkdYm6QYXBMH1V3qYlKEq7fhNLvw1CTeztK55rcJlz/s8XshGPwaeBELd8sXP961Bd4 Bsqo1u2bm6Tn7NbGeCHKMI6ZLz3nsajuT6gtfjxfpxr31lXhThkG8470a9mrtPp2uq4652np94FN Rr0uMM1a+jI6fVTvAMsrmLOy6VGBEa5fB3wOpctHaK9TgVOAxmN0MRXlwPpWBbefYuTHAj8tcu39 0nNuMMq+qqXfjoUl4mSSq/HbRlv9S3/ZqBumpXcB/zPqz9fSm2UY/Nuo1wWmCUBYdiPwHa3ck2Hw YQVzVjbVWGFmkW7YmewDfga8CNwHnB6VXyZcf7X0nAfLvG8pntE3gSXSc5an1Olf+hDh+i+jVieJ UiOxwBSiMQMgLLsFOEtr+7xWB8rQjdkgw0BXK40o1RWTZrDu0dKx0X4xylMOynZZVuZcVUyPCoz0 nA7gR8L1N6FWmQIqZtRGpwoSwF7gRek5WwCE658P3A9Y0TV3C9ffUOrWOlrZdIfdXuBhlCqaqZU/ myYs0RZaNzybUV7oNFqBt7T8BJJ2iW6zDAPGFKkDGE1yBTLtF0gKTCF6/4FWtsTYVVWVqtgw0nNW lHn9LmCOcP2bgKuAvsAtqNWqFGLVF7NGes4i4fpjgNfpFNbzi7QfD/TX8vtQMa40VkvPKWh5fWfW DuhCfg5Ju8nc5k/RxpZYuTR0gWkTlj0D5YgEeJca2S4xvcXTC4D0nKvpdNWXc2hqEiqSHROrhR0k bYAzhesPTmmvG61tKAE6PXoNRRnTg6OX6VvRhfB1GQa7tbyu5v6D8qNQpH4bsDVlbLrADACu0fK/ qOXqAr1MYCLip7AcI+48I78WIIpuv6mVN5NUPWntN0nP2So9p016ThtwEKU6RpIMOyAsuw9JVWiu INO19AYZBma0fbKWXi/DoEBX9tBpu4wDLozS2+jqx6o6vVFgYt+JKKON/pTvJ6kWzKc6LTg5XEtv MeruAF5DqbZVgH6IayTJoOHf4oSw7LNICuKTeqfCsj9BUnhN+yamPXqZc3JrLfwuJpnHklKIBaa+ lIuF67eQ3KW8HtlEMabhPCmlG/3JnhX5ZHaifDeLtLqlxpmcySQfuvnCstdH6WXaZ9iPMsJ1xpOM ZaXZL6DsqfcB3UO8A7WzrDm9T2DqG7dTOHSIEgUGIc5GyhatZJ1Rv4HkmZ/xKb08o5UPRa0UkuQT vY6uQVJTFc5D7fQ6SNpUN8ow2GVcq7sB2ugq2DGHUYfLdG6SYbCPDMhcYIRlJwWjcGg/Z1/yATBE zJxXT0Pf4o0P7pWcO39W4nuVHS+JGfPq6dMXOjpgzNyt9En0MUF877fDee3x1iPlo2beTOPxnwGh qzahuhUAjwCLpOeYKkDfIT2BUl1XkxT2+2QYXJ8yen0H+JYMgz2kY9o126mh38UkITBRYGwp5e1Q usNjwL/Ql3VRX2D35mUI0UB90wyOZmc19i+wa+NB+vTrnMA9re00RO3q6iRbVtYxeOzt1NXHS3od e96dRkPT6CN9v/HUIRr738Dg0bMRDSdQVzeAjsJh+ra8SfMpf5S3XNzFoSYsewhJVbhKhoEnLDtE HV4vRGXPprQFFTdrRklk2u4opoVkyMOTYbCfjEgc0RSWPQhlQ/SruMfymCrD4IXud1N7In+ILgzT ZRj8tYfvcSLwOzoPer0DjKv1VlrHVEltqBhMafZD99mR1QfvAXT1tYfiNkhZCMvuD1yLCtbORsXg Yi7PUljAEJgoztFaYV8fN8yg4XsV95TkLJS32+QaGQZPl9tZT5O50ftRJLL1Pq8V9cjqEjHdyG8D rpdhkJmhq5MLTGX0QR2diLdnYQ/2vRq1wsRe6nUyDNq712XP0Wt/W53TO+mNoYGcXkwuMDll0eM2 TPRbnGnAvaaDSVj2bOA0GQY1j7Lm9AzVWGG+jIrwphlH3wXuzvpD51RONXZJ7aizLFcIyx4O3CXD IN527kUdJAJAWPbFqBXnVmHZV6FO3K+I6oahzgYPAX7T017UnMqoxgpTQAniONRJ/AeFZRc72+IA P47SPwEWAAjLbgL+jPJ1NAF/EZZd6o/sc6pINQSmARAyDL6OOm45mmSoX+cDVDiC6D0+azI0arcS FSkG9fcgORlTbcfdXtR5jqOdnpPGO3QK8nzU33KsoutvgXIyoBorjP7FN6OEsph3sE6rq9fS8RmQ RTIMTgP+QPJsbk5GVENgjgMQlv0QcDnwBp0nxgaQ/O+6dmCUsOxHUGdj459kbI/a3Sksew3qjE5L 1pOVUx2VtBJljxxAhf3v0v4TZRnKmI25ObruLdTZkvcAZBgcEpY9E3BRu6TrZBisznqycvJYUk6Z 5KGBnLLIBSanLHKBySmLXGByyiIXmJyy+D/P9uGVPOu6DAAAACh6VFh0U29mdHdhcmUAAHja801M LsrPTU3JTFRwyyxKLc8vyi5WsAAAYBUIJ4KDNosAAAAASUVORK5CYII= --_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_--

3 2

Unable to make Single Sign on working on Windows 7 Guest
by Felipe Herrera Martinez 11 Mar '19

11 Mar '19

On the case I'll be able to create an installer, what is the name of the Application need to be there, in order to ovirt detects that Ovirt Guest agent is installed? I have created an installer adding OvirtGuestService files and the Product Name to be shown, a part of the command line post installs.. I have tried with "ovirt-guest-agent" and "Ovirt guest agent" Names for the application installed on Windows 7 guest and even both are presented on ovirt VM Applications tab, on any case LogonVDScommand appears. There is other option to make it work now? Thanks in advance, Felipe

3 5

Re: [ovirt-users] Need VM run once api
by Chandrahasa S 11 Mar '19

11 Mar '19

This is a multipart message in MIME format. --=_alternative 00199D2865257E91_= Content-Type: text/plain; charset="US-ASCII" Can any one help on this. Thanks & Regards Chandrahasa S From: Chandrahasa S/MUM/TCS To: users(a)ovirt.org Date: 28-07-2015 15:20 Subject: Need VM run once api Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00199D2865257E91_= Content-Type: text/html; charset="US-ASCII" <font size=2 face="sans-serif">Can any one help on this.</font> <br> <br><font size=2 face="sans-serif">Thanks & Regards<br> Chandrahasa S<br> </font> <br> <br> <br> <br><font size=1 color=#5f5f5f face="sans-serif">From:        </font><font size=1 face="sans-serif">Chandrahasa S/MUM/TCS</font> <br><font size=1 color=#5f5f5f face="sans-serif">To:        </font><font size=1 face="sans-serif">users(a)ovirt.org</font> <br><font size=1 color=#5f5f5f face="sans-serif">Date:        </font><font size=1 face="sans-serif">28-07-2015 15:20</font> <br><font size=1 color=#5f5f5f face="sans-serif">Subject:        </font><font size=1 face="sans-serif">Need VM run once api</font> <br> <hr noshade> <br> <br><font size=2 face="sans-serif">Hi Experts,</font> <br> <br><font size=2 face="sans-serif">We are integrating ovirt with our internal cloud.</font> <br> <br><font size=2 face="sans-serif">Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS.</font> <br> <br><font size=2 face="sans-serif">but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal.</font> <br> <br><font size=2 face="sans-serif">I believe we need to power ON vm using run once API, but we are not able get this API.</font> <br> <br><font size=2 face="sans-serif">Can some one help on this.</font> <br> <br><font size=2 face="sans-serif">I got reply on this query last time but unfortunately mail got deleted.</font> <br> <br><font size=2 face="sans-serif">Thanks & Regards<br> Chandrahasa S<br> </font> <br><p>=====-----=====-----=====<br> Notice: The information contained in this e-mail<br> message and/or attachments to it may contain <br> confidential or privileged information. If you are <br> not the intended recipient, any dissemination, use, <br> review, distribution, printing or copying of the <br> information contained in this e-mail message <br> and/or attachments to it are strictly prohibited. If <br> you have received this communication in error, <br> please notify us by reply e-mail or telephone and <br> immediately and permanently delete the message <br> and any attachments. Thank you</p> <p></p> --=_alternative 00199D2865257E91_=--

3 3

Re: [ovirt-users] Problem Windows guests start in pause
by Dafna Ron 11 Mar '19

11 Mar '19

Hi Lucas, Please send mails to the list next time. can you please do rpm -qa |grep qemu. also, can you try a different windows image? Thanks, Dafna On 07/14/2014 02:03 PM, lucas castro wrote: > On the host there I've tried to run the vm, I use a centOS 6.5 > and checked, no update for qemu, libvirt or related package. -- Dafna Ron

3 3

Feature: Hosted engine VM management
by Roy Golan 27 Feb '19

27 Feb '19

Hi all, Upcoming in 3.6 is enhancement for managing the hosted engine VM. In short, we want to: * Allow editing the Hosted engine VM, storage domain, disks, networks etc * Have a shared configuration for the hosted engine VM * Have a backup for the hosted engine VM configuration please review and comment on the wiki below: http://www.ovirt.org/Hosted_engine_VM_management Thanks, Roy

2 3

Re: [ovirt-users] Large DWH Database, how to empty
by Matt . 26 Feb '19

26 Feb '19

Hi, OK thanks! I saw that after upgrading to 4.0.5 from 4.0.4 the DB already dropped with around 500MB directly and is now at 2GB smaller. Does this sounds familiar to you with other settings in 4.0.5 ? Thanks, Matt 2017-01-08 10:45 GMT+01:00 Shirly Radco <sradco(a)redhat.com>: > No. That will corrupt your database. > > Are you using the full dwh or the smaller version for the dashboards? > > Please set the delete thresholds to save less data and the data older then > the time you set will be deleted. > Add a file to /ovirt-engine-dwhd.conf.d/ > update_time_to_keep_records.conf > > Add these lines with the new configurations. The numbers represent the hours > to keep the data. > > DWH_TABLES_KEEP_SAMPLES=24 > DWH_TABLES_KEEP_HOURLY=1440 > DWH_TABLES_KEEP_DAILY=43800 > > > These are the configurations for a full dwh. > > The smaller version configurations are: > DWH_TABLES_KEEP_SAMPLES=24 > DWH_TABLES_KEEP_HOURLY=720 > DWH_TABLES_KEEP_DAILY=0 > > The delete process by default at 3am every day (DWH_DELETE_JOB_HOUR=3) > > Best regards, > > Shirly Radco > > BI Software Engineer > Red Hat Israel Ltd. > 34 Jerusalem Road > Building A, 4th floor > Ra'anana, Israel 4350109 > > > On Fri, Jan 6, 2017 at 6:35 PM, Matt . <yamakasi.014(a)gmail.com> wrote: >> >> Hi, >> >> I seem to have some large database for the DWH logging and I wonder >> how I can empty it safely. >> >> Can I just simply empty the database ? >> >> Have a good weekend! >> >> Cheers, >> >> Matt >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > >

1 0

Re: [ovirt-users] Packet loss
by Doron Fediuck 26 Feb '19

26 Feb '19

----_com.android.email_640187878761650 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: base64 SGkgS3lsZSzCoApXZSBtYXkgaGF2ZSBzZWVuIHNvbWV0aGluZyBzaW1pbGFyIGluIHRoZSBwYXN0 IGJ1dCBJIHRoaW5rIHRoZXJlIHdlcmUgdmxhbnMgaW52b2x2ZWQuwqAKSXMgaXQgdGhlIHNhbWUg Zm9yIHlvdT/CoApUb255IC8gRGFuLCBkb2VzIGl0IHJpbmcgYSBiZWxsP8Kg ----_com.android.email_640187878761650 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: base64 PGh0bWw+PGhlYWQ+PG1ldGEgaHR0cC1lcXVpdj0iQ29udGVudC1UeXBlIiBjb250ZW50PSJ0ZXh0 L2h0bWw7IGNoYXJzZXQ9VVRGLTgiPjwvaGVhZD48Ym9keSA+PGRpdj5IaSBLeWxlLCZuYnNwOzwv ZGl2PjxkaXY+V2UgbWF5IGhhdmUgc2VlbiBzb21ldGhpbmcgc2ltaWxhciBpbiB0aGUgcGFzdCBi dXQgSSB0aGluayB0aGVyZSB3ZXJlIHZsYW5zIGludm9sdmVkLiZuYnNwOzwvZGl2PjxkaXY+SXMg aXQgdGhlIHNhbWUgZm9yIHlvdT8mbmJzcDs8L2Rpdj48ZGl2PlRvbnkgLyBEYW4sIGRvZXMgaXQg cmluZyBhIGJlbGw/Jm5ic3A7PC9kaXY+PC9ib2R5PjwvaHRtbD4= ----_com.android.email_640187878761650--

2 1

Backup & Restore
by suporte＠logicworks.pt 27 Dec '18

27 Dec '18

------=_Part_20329569_1409874801.1519819859027 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Hi, I'm testing backup & restore on Ovirt 4.2. I follow this doc https://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration/ Try to restore to a fresh installation but always get this error message: restore-permissions Preparing to restore: - Unpacking file 'back_file' Restoring: - Files Provisioning PostgreSQL users/databases: - user 'engine', database 'engine' Restoring: FATAL: Can't connect to database 'ovirt_engine_history'. Please see '/usr/bin/engine-backup --help'. On the live engine I run # engine-backup --scope=all --mode=backup --file=file_name --log=log_file_name And try to restore on a fresh installation: # engine-backup --mode=restore --file=file_name --log=log_file_name --provision-db --restore-permissions Any Idea? Thanks -- Jose Ferradeira http://www.logicworks.pt ------=_Part_20329569_1409874801.1519819859027 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: trebuchet ms,sans-serif; font-size: = 12pt; color: #000000"><div data-marker=3D"__QUOTED_TEXT__"><div style=3D"fo= nt-family: Times New Roman; font-size: 10pt; color: #000000;" data-mce-styl= e=3D"font-family: Times New Roman; font-size: 10pt; color: #000000;"><div>H= i,<br></div><br><div><span style=3D"font-size: 11pt; font-family: terminal,= monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;= ">I'm testing backup & restore on Ovirt 4.2.</span><br></div><div><span= style=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style= =3D"font-size: 11pt; font-family: terminal, monaco;">I follow this doc http= s://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration/</sp= an><br></div><div><span style=3D"font-size: 11pt; font-family: terminal, mo= naco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;">T= ry to restore to a fresh installation but always get this error message:</s= pan><br></div><br><div><span style=3D"font-size: 11pt; font-family: termina= l, monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, monac= o;">restore-permissions</span><br><span style=3D"font-size: 11pt; font-fami= ly: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font-family: term= inal, monaco;">Preparing to restore:</span><br><span style=3D"font-size: 11= pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font= -family: terminal, monaco;">- Unpacking file 'back_file'</span><br><span st= yle=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"f= ont-size: 11pt; font-family: terminal, monaco;">Restoring:</span><br><span = style=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D= "font-size: 11pt; font-family: terminal, monaco;">- Files</span><br><span s= tyle=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"= font-size: 11pt; font-family: terminal, monaco;">Provisioning PostgreSQL us= ers/databases:</span><br><span style=3D"font-size: 11pt; font-family: termi= nal, monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, mon= aco;">- user 'engine', database 'engine'</span><br><span style=3D"font-size= : 11pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; = font-family: terminal, monaco;">Restoring:</span><br><span style=3D"font-si= ze: 11pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt= ; font-family: terminal, monaco;">FATAL: Can't connect to database 'ovirt_e= ngine_history'. Please see '/usr/bin/engine-backup --help'.</span><br></div= ><br><div><span style=3D"font-size: 11pt; font-family: terminal, monaco;" d= ata-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;">On the li= ve engine I run # engine-backup --scope=3Dall --mode=3Dbackup --file= =3Dfile_name --log=3Dlog_file_name</span></div><div><span style=3D"font-siz= e: 11pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt;= font-family: terminal, monaco;"><br data-mce-bogus=3D"1"></span></div><div= ><span style=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-s= tyle=3D"font-size: 11pt; font-family: terminal, monaco;">And try to restore= on a fresh installation:</span><br></div><div><span style=3D"font-size: 11= pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font= -family: terminal, monaco;"># engine-backup --mode=3Drestore --file=3Dfile_= name --log=3Dlog_file_name --provision-db --restore-permissions</span></div= ><div><span style=3D"font-size: 11pt; font-family: terminal, monaco;" data-= mce-style=3D"font-size: 11pt; font-family: terminal, monaco;"><br data-mce-= bogus=3D"1"></span></div><div><span style=3D"font-size: 11pt; font-family: = terminal, monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal= , monaco;">Any Idea?<br data-mce-bogus=3D"1"></span></div><div><span style= =3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"font= -size: 11pt; font-family: terminal, monaco;"><br data-mce-bogus=3D"1"></spa= n></div><div><span style=3D"font-size: 11pt; font-family: terminal, monaco;= " data-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;">Thanks= <br data-mce-bogus=3D"1"></span></div><div><span style=3D"font-size: 11pt; = font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font-fam= ily: terminal, monaco;"><br data-mce-bogus=3D"1"></span></div><div><span st= yle=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"f= ont-size: 11pt; font-family: terminal, monaco;"><br data-mce-bogus=3D"1"></= span></div><br><div>-- <br></div><div><hr style=3D"width: 100%; height: 2px= ;" data-mce-style=3D"width: 100%; height: 2px;">Jose Ferradeira<br>http://w= ww.logicworks.pt</div></div><br></div></div></body></html> ------=_Part_20329569_1409874801.1519819859027--

4 16

Out of sync, hosts network config differs from DC
by femi adegoke 02 Dec '18

02 Dec '18

Property: default route, host - true, DC - false I have 4 nics. bond0 = 2 x 10g eno1 = ovirtmgmt eno2 = for vm traffic. eno2 says it's out of sync, hosts network config differs from DC, default route: host - true, DC - false. I have tried "sync all networks" but the message still remains See attached. Where can I look to fix the issue?

3 2

oVirt Node on CentOS 7.5 and AMD EPYC Support
by Tobias Scheinert 30 Nov '18

30 Nov '18

Hi, I am currently building a new virtualization cluster with oVirt, using AMD EPYC processors (AMD EPYC 7351P). At the moment I'm running oVirt Node Version 4.2.3 @ CentOS 7.4.1708. We have the situation that the processor type is recognized as "AMD Opteron G3". With this type of instruction set the VMs are not able to do AES in hardware, this results in poor performance in our case. I found some information that tells me that this problem should be solved with CentOS 7.5 --> <https://access.redhat.com/errata/RHEA-2018:1488> My actual questions: - Are there any further information about the AMD EPYC support? - Any information about an update of the oVirt node to CentOS 7.5? Greeting Tobias

7 10

Error installing ovirt node
by Junaid Jadoon 20 Sep '18

20 Sep '18

Dear All, I have Ovirt engine 4.2 and node version is 4.2. After installing node in in ovirt engine when i try to install node it gives following error 14:25:37,410+05 ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] (EE-ManagedThreadFactory-engine-Thread-19) [52669850] Host installation failed for host 'bd8d007a-be92-4075-bba9-6cbeb890a1e5', 'node_2': Command returned failure code 1 during SSH session 'root(a)192.168.20.20' 2018-02-27 14:25:37,416+05 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] (EE-ManagedThreadFactory-engine-Thread-19) [52669850] START, SetVdsStatusVDSCommand(HostName = node_2, SetVdsStatusVDSCommandParameters:{hostId='bd8d007a-be92-4075-bba9-6cbeb890a1e5', status='InstallFailed', nonOperationalReason='NONE', stopSpmFailureLogged='false', maintenanceReason='null'}), log id: 2b138e87 2018-02-27 14:25:37,423+05 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] (EE-ManagedThreadFactory-engine-Thread-19) [52669850] FINISH, SetVdsStatusVDSCommand, log id: 2b138e87 2018-02-27 14:25:37,429+05 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-19) [52669850] EVENT_ID: VDS_INSTALL_FAILED(505), Host node_2 installation failed. Command returned failure code 1 during SSH session 'root(a)192.168.20.20'. 2018-02-27 14:25:37,433+05 INFO [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] (EE-ManagedThreadFactory-engine-Thread-19) [52669850] Lock freed to object 'EngineLock:{exclusiveLocks='[bd8d007a-be92-4075-bba9-6cbeb890a1e5=VDS]', sharedLocks=''}' I have attached log file for your reference Please help me out.

3 8

Failed to synchronize networks of Provider ovirt-provider-ovn
by Kapetanakis Giannis 14 Sep '18

14 Sep '18

Hi, After upgrading to 4.2.1 I have problems with ovn provider. I'm getting "Failed to synchronize networks of Provider ovirt-provider-ovn." I use custom SSL certificate in apache and I guess this is the reason. I've tried to update ovirt-provider-ovn.conf with [OVIRT] #ovirt-ca-file=/etc/pki/ovirt-engine/ca.pem ovirt-ca-file=/etc/pki/ovirt-engine/apache-ca.pem but still no go Any tips on this? thanks G

4 11

Install oVirt node without Internet repository
by G, Maghesh Kumar (Nokia - IN/Bangalore) 13 Sep '18

13 Sep '18

--_000_HE1PR0702MB3532EC34365D995765A2B7D783A60HE1PR0702MB3532_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi Description of problem: Cannot add host - install fails & Install oVirt node without Internet repos= itory Version: Ovirt-4.2 Host is installed with RHEL 7.4 Actual results: Host KVM02 installation failed. Command returned failure code 1 during SSH = session 'root(a)192.175.2.231<mailto:root@192.175.2.231>' I found that right now on my oVirt Nodes in my test environment does not NO= T connect to the internet... Basically, i need the offline repository to access from oVirt nodes without= Internet access. Please guide us how to proceed Regards, Maghesh --_000_HE1PR0702MB3532EC34365D995765A2B7D783A60HE1PR0702MB3532_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-IN" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">Hi<o:p></o:p></span= ></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <pre><span style=3D"font-size:12.0pt;color:black">Description of problem:<o= :p></o:p></span></pre> <pre><span style=3D"font-size:12.0pt;color:black">Cannot add host - install= fails & Install oVirt node without Internet repository<o:p></o:p></spa= n></pre> <pre><span style=3D"font-size:12.0pt;color:black"><o:p> </o:p></span><= /pre> <pre><span style=3D"font-size:12.0pt;color:black">Version: Ovirt-4.2<o:p></= o:p></span></pre> <pre><span style=3D"font-size:12.0pt;color:black">Host is installed with RH= EL 7.4<o:p></o:p></span></pre> <pre><span style=3D"font-size:12.0pt;color:black"><o:p> </o:p></span><= /pre> <pre><span style=3D"font-size:12.0pt;color:black">Actual results:<o:p></o:p= ></span></pre> <pre><span style=3D"font-size:12.0pt;color:black">Host KVM02 installation f= ailed. Command returned failure code 1 during SSH session '<a href=3D"mailt= o:root@192.175.2.231"><span style=3D"color:#6699CC">root(a)192.175.2.231</spa= n></a>'<o:p></o:p></span></pre> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">I found that right = now on my oVirt Nodes in my test environment <b>does not NOT connect to the internet.</b>.. <o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">Basically, i need t= he offline repository to access from oVirt nodes without Internet access.<o= :p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN"><o:p> </o:p></= span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">Please guide us how= to proceed<o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN"><o:p> </o:p></= span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">Regards,<o:p></o:p>= </span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">Maghesh<o:p></o:p><= /span></p> <p class=3D"MsoNormal"><o:p> </o:p></p> </div> </body> </html> --_000_HE1PR0702MB3532EC34365D995765A2B7D783A60HE1PR0702MB3532_--

3 7

Re: External ceph storage
by Luca 'remix_tj' Lorenzetto 27 Aug '18

27 Aug '18

No, The only way you have is to configure cinder to manage ceph pool or in alternative you have to deploy an iscsi gateway, no other ways are available at the moment. So you can't use rbd directly. Luca Il dom 27 mag 2018, 16:54 Leo David <leoalex(a)gmail.com> ha scritto: > Thank you Luca, > At the moment i would try the cinder storage provider, since we already > have a proxmox cluster directly connecting to ceph. The problem is that I > just could not find a straight way to do this. > ie: Specify the ceph monitors and ceph pool to connect to. Can oVirt > directly connect to ceph monitors ? How the configuration should be done if > so ? > Thank you very much ! > > > On Sun, May 27, 2018, 17:20 Luca 'remix_tj' Lorenzetto < > lorenzetto.luca(a)gmail.com> wrote: > >> Hello, >> >> Yes, using cinder or through iscsi gateway. >> >> For a simpler setup i suggest the second option. >> >> Luca >> >> Il dom 27 mag 2018, 16:08 Leo David <leoalex(a)gmail.com> ha scritto: >> >>> Hello everyone, >>> I am new to ovirt and very impressed of its features. I would like to >>> levereage on our existing ceph cluster to provide rbd images for vm hdds, >>> is this possible to achieve ? >>> Thank you very much ! >>> Regards, >>> Leo >>> _______________________________________________ >>> Users mailing list -- users(a)ovirt.org >>> To unsubscribe send an email to users-leave(a)ovirt.org >>> >>

3 3

Network issues with oVirt 4.2 and cloud-init
by Berger, Sandy 17 Aug '18

17 Aug '18

--_000_DM5PR05MB316161E1C7E2EB8EA09A76A0D5D40DM5PR05MB3161namp_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable We're using cloud-init to customize VMs built from a template. We're using = static IPV4 settings so we're specifying an IP address, subnet mask, and ga= teway. There is apparently a bug in the current version of cloud-init shipp= ing as part of CentOS 7.4 (https://bugzilla.redhat.com/show_bug.cgi?id=3D14= 92726) that fails to set the gateway properly. In the description of the bu= g, it says it is fixed in RHEL 7.5 but also says one can use https://people= .redhat.com/rmccabe/cloud-init/cloud-init-0.7.9-20.el7.x86_64.rpm which is = what we're doing. When the new VM first boots, the 3 IPv4 settings are all set correctly. Reb= oots of the VM maintain the settings properly. But, if the VM is shut down = and started again via the oVirt GUI, all of the IPV4 settings on the eth0 v= irtual NIC are lost and the /etc/sysconfig/network-scripts/ifcfg-eth0 shows= that the NIC is now set up for DHCP. Are we doing something incorrectly? Sandy Berger IT - Infrastructure Engineer II Quad/Graphics Performance through Innovation Sussex, Wisconsin 414.566.2123 phone 414.566.4010/2123 pager/PIN sandy.berger(a)qg.com<mailto:sandy.berger@qg.com> www.QG.com<http://www.qg.com/> Follow Us: Facebook<http://www.qg.com/social1> | Twitter<http://www.qg.com/= social2> | LinkedIn<http://www.qg.com/social3> | YouTube<http://www.qg.com/= social4> --_000_DM5PR05MB316161E1C7E2EB8EA09A76A0D5D40DM5PR05MB3161namp_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> <p class=3D"MsoNormal">We’re using cloud-init to customize VMs built = from a template. We’re using static IPV4 settings so we’re spec= ifying an IP address, subnet mask, and gateway. There is apparently a bug i= n the current version of cloud-init shipping as part of CentOS 7.4 (<a href=3D"https://bugzilla.redhat.com/show_bug.cgi?id=3D14= 92726">https://bugzilla.redhat.com/show_bug.cgi?id=3D1492726</a>) that fail= s to set the gateway properly. In the description of the bug, it says it is= fixed in RHEL 7.5 but also says one can use <a href=3D"https://people.redhat.com/rmccabe/cloud-init/cloud-init-0.7= .9-20.el7.x86_64.rpm"> https://people.redhat.com/rmccabe/cloud-init/cloud-init-0.7.9-20.el7.x86_64= .rpm</a> which is what we’re doing.<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">When the new VM first boots, the 3 IPv4 settings are= all set correctly. Reboots of the VM maintain the settings properly. But, = if the VM is shut down and started again via the oVirt GUI, all of the IPV4= settings on the eth0 virtual NIC are lost and the /etc/sysconfig/network-scripts/ifcfg-eth0 shows that the = NIC is now set up for DHCP.<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Are we doing something incorrectly?<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal"><b><span style=3D"font-size:10.0pt;font-family:&quot= ;Arial",sans-serif;color:#1E47A4">Sandy Berger </span></b><span style=3D"font-size:10.5pt;font-family:"Arial",sa= ns-serif;color:#444444"><o:p></o:p></span></p> <p class=3D"MsoNormal"><i><span style=3D"font-size:10.0pt;font-family:&quot= ;Arial",sans-serif;color:#434D5B">IT – Infrastructure Engineer I= I</span></i><span style=3D"font-size:10.5pt;font-family:"Arial",s= ans-serif;color:#444444"><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;font-family:"Ar= ial",sans-serif;color:#444444"> <o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial",sans-serif;color:#1E47A4">Quad/Graphics</span><span style=3D"font= -size:10.5pt;font-family:"Arial",sans-serif;color:#444444"><o:p><= /o:p></span></p> <p class=3D"MsoNormal"><i><span style=3D"font-size:8.0pt;font-family:"= Arial",sans-serif;color:#434D5B">Performance</span></i><span style=3D"= font-size:8.0pt;font-family:"Arial",sans-serif;color:#434D5B">&nb= sp;through </span><i><span style=3D"font-size:8.5pt;font-family:"= Arial",sans-serif;color:#434D5B">Innovation</span></i><span style=3D"f= ont-size:10.5pt;font-family:"Arial",sans-serif;color:#444444"><o:= p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;font-family:"Ar= ial",sans-serif;color:#434D5B"> </span><span style=3D"font-size:1= 0.5pt;font-family:"Arial",sans-serif;color:#444444"><o:p></o:p></= span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial",sans-serif;color:#434D5B">Sussex, Wisconsin</span><span style=3D"= font-size:10.5pt;font-family:"Arial",sans-serif;color:#444444"><o= :p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial",sans-serif;color:#434D5B">414.566.2123 phone</span><span style=3D= "font-size:10.5pt;font-family:"Arial",sans-serif;color:#444444"><= o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial",sans-serif;color:#434D5B">414.566.4010/2123 pager/PIN</span><span= style=3D"font-size:10.5pt;font-family:"Arial",sans-serif;color:#= 444444"><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"> <= /span><span style=3D"font-size:10.5pt;font-family:"Arial",sans-se= rif;color:#444444"><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial",sans-serif;color:black"><a href=3D"mailto:sandy.berger@qg.com"><s= pan style=3D"color:blue">sandy.berger(a)qg.com</span></a></span><span style= =3D"font-size:10.5pt;font-family:"Arial",sans-serif;color:#444444= "><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-family:"Arial",sans-se= rif;color:black"><a href=3D"http://www.qg.com/"><span style=3D"font-size:10= .0pt;color:blue">www.QG.com</span></a></span><span style=3D"font-size:10.5p= t;font-family:"Arial",sans-serif;color:#444444"><o:p></o:p></span= ></p> <p class=3D"MsoNormal"><o:p> </o:p></p> </div> Follow Us: <a href=3D"http://www.qg.com/social1">Facebook</a> | <a href=3D"= http://www.qg.com/social2"> Twitter</a> | <a href=3D"http://www.qg.com/social3">LinkedIn</a> | <a href= =3D"http://www.qg.com/social4"> YouTube</a> </body> </html> --_000_DM5PR05MB316161E1C7E2EB8EA09A76A0D5D40DM5PR05MB3161namp_--

4 5

oVirt reports using Grafana
by Karli Sjöberg 15 Jul '18

15 Jul '18

Heya! I've been whishing for reports in oVirt ever since the old 'Jasper Reports' was removed. For an Enterprise, having pretty graphs to look at is a must. Searching the subject, I've found this[*] and have managed to get it installed OK but having issues trying to follow the guide setting it up. First of all, I think the guide should have at least mentioned that 'pg_hba.conf' needs to be edited for the read only user to be able to connect to the database, I scratched my head around that for a while before I got it. When I first type in the query example, I got syntax errors: 'pq: syntax error at or near "$"'. I continued anyways since I figured it would be solved at a later point, which turned out to be true, since the next step is to use the "Templating feature" to add variables. Unfortunately this doesn't go so well, even though I followed the instructions very carefully. After hitting save on the first variable I am rewarded with the error message: 'Template variables could not be initialized: pq: column "en_us" does not exist.' Are the queries stated in the guide still correct? This is for 'user_locale': "SELECT DISTINCT language_code from enum_translator" [*]:https://www.ovirt.org/blog/2018/01/ovirt-report-using-grafana/ TIA /K

5 8

Changing resolution of console on Mint guest running on Ovirt 4.2
by pascal＠butterflyit.com 09 Jul '18

09 Jul '18

I keep getting an error: Could not set configuration for CRTC 63. I checked that I have spice-agent and spice-agentd running. Also qemu-guest-agent. lspci shows that I have a QXL adapter. xrandr -q shows that I have many different config available. but none work. What am I missing? Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192 Virtual-0 connected primary 1024x768+0+0 0mm x 0mm 1024x768 59.95*+ 1920x1200 59.95 1920x1080 60.00 1600x1200 59.95 1680x1050 60.00 1400x1050 60.00 1280x1024 59.95 1440x900 59.99 1280x960 59.99 1280x854 59.95 1280x800 59.96 1280x720 59.97 1152x768 59.95 800x600 59.96 848x480 59.94 720x480 59.94 640x480 59.94 Virtual-1 disconnected V

2 1

ovirt-node: freshly installed node: network interfaces not visible
by etienne.charlier＠reduspaceservices.eu 06 Jul '18

06 Jul '18

Hello, I'm deploying a test cluster to get used to the ovirt product. My ovirt ( 4.2.2) engine is deployed in a vmware virtual machine. I'm busy deploying 5 hosts using the ovirt-node iso. I have issue with the additional physical network interface ( used for vm trafic and iSCSI) In ovirt manager I can't see the physical network interfaces. It's thus not possible to assign logical network to physical interfaces and my hosts stays in "non operational" status. How should I configure the additional interfaces in the ovirt-node installer to have them recognized ? I somehow managed to configure one host and I can see a comment line in /etc/sysconfig/network-script/ifcfg-... saying vdsm has acquired the interface.... No Such line in the ifcfg-* file in non operational hosts.... Any idea ? Etienne

3 4

vGPU setup guide
by Callum Smith 24 Jun '18

24 Jun '18

Dear All, IS this the most current and useful example of implenting vGPUs in oVirt? I had understood that 4.2 had NVIDIA GRID support as a flagship feature, but this appears to be 4.1.4? It seems a very reasonable and decent guide, just don't want to go down this route if there's alternatives now available in 4.2.x. https://mpolednik.github.io/2017/09/13/vgpu-in-ovirt/ Regards, Callum -- Callum Smith Research Computing Core Wellcome Trust Centre for Human Genetics University of Oxford e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk>

3 7

Fwd: vGPU VM not starting
by Ales Musil 24 Jun '18

24 Jun '18

On Thu, May 17, 2018 at 12:01 AM, Callum Smith <callum(a)well.ox.ac.uk> wrote: > Dear All, > > Our vGPU installation is progressing, though the VM is failing to start. > > 2018-05-16 22:57:34,328+0100 ERROR (vm/1bc9dae8) [virt.vm] > (vmId='1bc9dae8-a0ea-44b3-9103-5805100648d0') The vm start process failed > (vm:943) > Traceback (most recent call last): > File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 872, in > _startUnderlyingVm > self._run() > File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2872, in > _run > dom.createWithFlags(flags) > File "/usr/lib/python2.7/site-packages/vdsm/common/libvirtconnection.py", > line 130, in wrapper > ret = f(*args, **kwargs) > File "/usr/lib/python2.7/site-packages/vdsm/common/function.py", line > 92, in wrapper > return func(inst, *args, **kwargs) > File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1099, in > createWithFlags > if ret == -1: raise libvirtError ('virDomainCreateWithFlags() failed', > dom=self) > libvirtError: Cannot get interface MTU on '': No such device > > That's the specific error, some other information. It seems the GPU > 'allocation' of uuid against the nvidia-xx mdev type is proceeding > correctly, and the device is being created by the VM instantiation but the > VM does not succeed in going up with this error. Any other logs or > information relevant to help diagnose? > > Regards, > Callum > > -- > > Callum Smith > Research Computing Core > Wellcome Trust Centre for Human Genetics > University of Oxford > e. callum(a)well.ox.ac.uk > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > > Hi Callum, can you share your version of the setup? Also do you use OVS switch type in the cluster? Regards, Ales. -- ALES MUSIL INTERN - rhv network Red Hat EMEA <https://www.redhat.com/> amusil(a)redhat.com IM: amusil <https://red.ht/sig>

6 14

Unable to backend oVirt with Cinder
by Logan Kuhn 21 Jun '18

21 Jun '18

------=_Part_51316288_608143832.1472587678781 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit I've got Cinder configured and pointed at Ceph for it's back end storage. I can run ceph commands on the cinder machine and cinder is configured for noauth and I've also tried it with Keystone for auth. I can run various cinder commands and it'll return as expected. When I configure it in oVirt it'll add the external provider fine, but when I go to create a disk it doesn't populate the volume type field, it's just empty. The corresponding command for cinder: cinder type-list and cinder type-show <name> returns fine and it is public. Ovirt and Cinder are on the same host so it isn't a firewall issue. Cinder config: [DEFAULT] rpc_backend = rabbit #auth_strategy = keystone auth_strategy = noauth enabled_backends = ceph #glance_api_servers = http://10.128.7.252:9292 #glance_api_version = 2 #[keystone_authtoken] #auth_uri = http://10.128.7.252:5000/v3 #auth_url = http://10.128.7.252:35357/v3 #auth_type = password #memcached_servers = localhost:11211 #project_domain_name = default #user_domain_name = default #project_name = services #username = user #password = pass [ceph] volume_driver = cinder.volume.drivers.rbd.RBDDriver volume_backend_name = ceph rbd_pool = ovirt-images rbd_user = cinder rbd_secret_uuid = <secret> rbd_ceph_conf = /etc/ceph/ceph.conf rbd_flatten_volume_from_snapshot = true rbd_max_clone_depth = 5 rbd_store_chunk_size = 4 rados_connect_timeout = -1 #glance_api_version = 2 [database] connection = postgresql://user:pass@10.128.2.33/cinder [oslo_concurrency] lock_path = /var/lib/cinder/tmp [oslo_messaging_rabbit] rabbit_host = localhost rabbit_port = 5672 rabbit_userid = user rabbit_password = pass Regards, Logan ------=_Part_51316288_608143832.1472587678781 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: Arial; font-size: 12pt; color: #0000= 00"><div>I've got Cinder configured and pointed at Ceph for it's back end s= torage.  I can run ceph commands on the cinder machine and cinder is c= onfigured for noauth and I've also tried it with Keystone for auth.  I= can run various cinder commands and it'll return as expected. </= div><div><br data-mce-bogus=3D"1"></div><div>When I configure it in oVirt i= t'll add the external provider fine, but when I go to create a disk it does= n't populate the volume type field, it's just empty.  The correspondin= g command for cinder: cinder type-list and cinder type-show <name> re= turns fine and it is public. </div><div><br data-mce-bogus=3D"1"></div= ><div>Ovirt and Cinder are on the same host so it isn't a firewall issue.</= div><div><br data-mce-bogus=3D"1"></div><div>Cinder config:</div><div>[DEFA= ULT]<br>rpc_backend =3D rabbit<br>#auth_strategy =3D keystone<br>auth_strat= egy =3D noauth<br>enabled_backends =3D ceph<br>#glance_api_servers =3D http= ://10.128.7.252:9292<br>#glance_api_version =3D 2<br><br>#[keystone_authtok= en]<br>#auth_uri =3D http://10.128.7.252:5000/v3<br>#auth_url =3D http://10= .128.7.252:35357/v3<br>#auth_type =3D password<br>#memcached_servers =3D lo= calhost:11211<br>#project_domain_name =3D default<br>#user_domain_name =3D = default<br>#project_name =3D services<br>#username =3D user<br>#passwo= rd =3D pass<br><br>[ceph]<br>volume_driver =3D cinder.volume.drivers.rbd.RB= DDriver<br>volume_backend_name =3D ceph<br>rbd_pool =3D ovirt-images<br>rbd= _user =3D cinder<br>rbd_secret_uuid =3D <secret><br>rbd_ceph_con= f =3D /etc/ceph/ceph.conf<br>rbd_flatten_volume_from_snapshot =3D true<br>r= bd_max_clone_depth =3D 5<br>rbd_store_chunk_size =3D 4<br>rados_connect_tim= eout =3D -1<br>#glance_api_version =3D 2<br><br>[database]<br>connection = =3D postgresql://user:pass@10.128.2.33/cinder<br><br>[oslo_concurrency]<br>= lock_path =3D /var/lib/cinder/tmp<br><br>[oslo_messaging_rabbit]<br>rabbit_= host =3D localhost<br>rabbit_port =3D 5672<br>rabbit_userid =3D <span = style=3D"color: #000000; font-family: Arial; font-size: 16px; font-style: n= ormal; font-variant-ligatures: normal; font-variant-caps: normal; font-weig= ht: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-a= lign: start; text-indent: 0px; text-transform: none; white-space: normal; w= idows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; display: inlin= e !important; float: none; background-color: #ffffff;" data-mce-style=3D"co= lor: #000000; font-family: Arial; font-size: 16px; font-style: normal; font= -variant-ligatures: normal; font-variant-caps: normal; font-weight: normal;= letter-spacing: normal; line-height: normal; orphans: 2; text-align: start= ; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; w= ord-spacing: 0px; -webkit-text-stroke-width: 0px; display: inline !importan= t; float: none; background-color: #ffffff;">user</span><br>rabbit_password = =3D <span style=3D"color: #000000; font-family: Arial; font-size: 16px= ; font-style: normal; font-variant-ligatures: normal; font-variant-caps: no= rmal; font-weight: normal; letter-spacing: normal; line-height: normal; orp= hans: 2; text-align: start; text-indent: 0px; text-transform: none; white-s= pace: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px;= display: inline !important; float: none; background-color: #ffffff;" data-= mce-style=3D"color: #000000; font-family: Arial; font-size: 16px; font-styl= e: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-= weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; te= xt-align: start; text-indent: 0px; text-transform: none; white-space: norma= l; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; display: i= nline !important; float: none; background-color: #ffffff;">pass</span></div= ><div><br></div><div data-marker=3D"__SIG_PRE__">Regards,<br>Logan</div></d= iv></body></html> ------=_Part_51316288_608143832.1472587678781--

4 4

Hardering oVirt Engine
by Punaatua PK 19 Jun '18

19 Jun '18

Hello, we are subject to PCI-DSS. I have some questions. We currently have setup oVirt in our environnement. We created 2 Datacenter. - one with a cluster with hosted engine on gluster (Hyperconverged env) which represents the "LAN" part - one with a cluster with gluster storage wich is the DMZ In PCI-DSS we have to secure communication (use HTTPs as much as possible). I did saw that ovirt-ha-agent (on hosted-engine capable host) check the status of the engine by sending GET request on the hosted-engine on port 80 (the same check that hosted-engine --vm-status did in fact). Since ovirt 4.2.2, with the introduction of gluster eventing, a new flow (HTTP post resquest) is needed from gluster nodes to the engine. (In my case, it's a flow from the DMZ to the LAN part in HTTP (non secure) Here is my question. Is it possible to "hardering" this part of the engine ? Another question out of PCI scope. Events like warning and error in the dashboard are clean each days. I tried to find which process did that (look into /etc/cron.daily, root crontab, etc) on the engine without succes. Is there any maintenance task that is run periodicaly ? Could we have the list of all the engine's task ? (regulary check the status of host, vm, storage) also the frequency ? I would appreciate the help. (Great great product ovirt !) Thank you for your jobs ! We did manage KVM hypervisor as standalone machine without all the power that libvirt provides. No need to spend lot of money into licencing product (VSphere and co)

2 3

Non-responsive vm's due to crashed host and hosted vm liveliness check fails
by clam2718＠gmail.com 15 Jun '18

15 Jun '18

Dear Community: The local drive on a host running ovirt-node-ng-4.1.9 in a three node cluster failed. I have production JIRA and Postres running on it at the time, not in HA, just simple vm's. Storage is via NFS on a Synology NAS. Hosted Engine was on a different host, but JIRA and Postgres vm's showed nonresponsive. I tried different things but then stupidly thought that upgrading my Hosted Engine would reinitialize the vm's that were on the failed host. Update of HE seemed to go well (output below) but now my Hosted Engine, while up, fails the liveliness check and the web management console is unavailable. I cannot console into the HE from the host it is running on. Below are the results of my attempts to console into the Hosted Engine. Please help! I have search forums, lists and Google but have not been able to fix this. My coworkers and manager are anxious. --- When I try "hosted-engine --console" after setting the console password I get The engine VM is running on this host Connected to domain HostedEngine Escape character is ^] _ The prompt is non-responsive except for the escape character key combo. --- "virsh -r list" gives ID 3, Name: HostedEngine, State: running "virsh -r console HostedEngine" gives Connected to domain HostedEngine Escape character is ^] error: operation forbidden: read only access prevents virDomainOpenConsole "virsh -r vncdisplay HostedEngine" gives "0:0" and returns me to prompt --- I am SSHed into the host running my Hosted Engine from a CentOS7 minimal install with packages xorg-x11-server-Xorg, xorg-x11-xauth and xorg-x11-apps installed. The result of "grep -i X11Forwarding /etc/ssh/sshd_config" shows it set to "Yes". I SSH into the host using "ssh -Y root(a)xxx.xxx.xxx.xxx" I am logged into the CentOS7 minimal install as root. I know root is poor practice but was trying to minimize anything that could be causing an issue. --- Below are the results of my attempt to update Hosted Engine (slightly redacted to remove personal info): --== CONFIGURATION PREVIEW ==-- Default SAN wipe after delete : False Firewall manager : firewalld Update Firewall : True Host FQDN : ovengineint.xdomainx.tld Upgrade packages : True Engine database secured connection : False Engine database user name : engine Engine database name : engine Engine database host : localhost Engine database port : 5432 Engine database host name validation : False Engine installation : True PKI organization : xdomainx.tld Set up ovirt-provider-ovn : True Configure WebSocket Proxy : True DWH installation : True DWH database secured connection : False DWH database host : localhost DWH database user name : ovirt_engine_history DWH database name : ovirt_engine_history DWH database port : 5432 DWH database host name validation : False Configure Image I/O Proxy : True Configure VMConsole Proxy : True --== SUMMARY ==-- [ INFO ] Restarting httpd Web access is enabled at: http://ovengineint.xdomainx.tld:80/ovirt-engine https://ovengineint.xdomainx.tld:443/ovirt-engine Internal CA XX:XX:XX:XX... SSH fingerprint: SHA256:xxxxxxxxxx... --== END OF SUMMARY ==-- [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20180502165652-88pkpi.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20180502170149-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ INFO ] Execution of setup completed successfully Again, thank you so very much for any suggestions! I have found many answers on this mailing list archive to be of great insight and help. Respectfully, Charles

3 11

LDAP Authentication issues
by Callum Smith 12 Jun '18

12 Jun '18

Dear All, I'm having problems getting LDAP running, login works, but I'm getting "user is not authorised to perform login" - this is even if i specify the UserRole specifically to the LDAP group the user is in. 2018-05-25 08:56:16,212+01 INFO [org.ovirt.engine.core.sso.utils.AuthenticationUtils] (default task-23) [] User callum@Biomedical Research Computing successfully logged in with scopes: ovirt-app-admin ovirt-app-api ovirt-app-portal ovirt-ext=auth:sequence-priority=~ ovirt-ext=revoke:revoke-all ovirt-ext=token-info:authz-search ovirt-ext=token-info:public-authz-search ovirt-ext=token-info:validate ovirt-ext=token:password-access 2018-05-25 08:56:16,391+01 INFO [org.ovirt.engine.core.bll.aaa.CreateUserSessionCommand] (default task-25) [63e60fe9] Running command: CreateUserSessionCommand internal: false. 2018-05-25 08:56:16,430+01 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-25) [63e60fe9] EVENT_ID: USER_VDC_LOGIN_FAILED(114), User callum@Biomedical Research Computing connecting from '192.168.65.254' failed to log in<UNKNOWN>. 2018-05-25 08:56:16,430+01 ERROR [org.ovirt.engine.core.aaa.servlet.SsoPostLoginServlet] (default task-25) [] The user callum@Biomedical Research Computing is not authorized to perform login on a side note: is it possible to assign permissions to all members of an LDAP tree where they dont have a common group membership? Regards, Callum -- Callum Smith Research Computing Core Wellcome Trust Centre for Human Genetics University of Oxford e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk>

4 23

Hosted Engine w Gluster - increase number of hosts
by ovirt＠fateknollogee.com 11 Jun '18

11 Jun '18

Using this as reference: https://www.ovirt.org/blog/2018/02/up-and-running-with-ovirt-4-2-and-gluste… Assuming you want to increase the number of hosts from 3 to 5 or 9. How do you add more hosts? What is best practice & any gotcha's?

7 15