February 2024 - Users - oVirt List Archives

Hosted Engine Deployment timeout waiting for VM
by Jonas Liechti 09 Feb '26

09 Feb '26

Hello users, I am currently trying to deploy the self-hosted engine via the web interface but it seems stuck at the task "Wait for the local VM" (https://github.com/oVirt/ovirt-ansible-collection/blob/master/roles/hosted_…) I am unsure what to look at for getting more info as I haven't worked a lot with Ansible before. Do you have any idea how to debug? The temporary IP is added to /etc/hosts and I can also login to the VM via SSH: [root@server-005 ~]# cat /etc/hosts 192.168.1.97 ovirt-engine-test.admin.int.rabe.ch # temporary entry added by hosted-engine-setup for the bootstrap VM 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 10.128.16.5 server-005.admin.int.rabe.ch 10.128.16.6 server-006.admin.int.rabe.ch 10.128.16.7 server-007.admin.int.rabe.ch #10.128.32.2 ovirt-engine-test.admin.int.rabe.ch 10.132.16.5 server-005.storage.int.rabe.ch 10.132.16.6 server-006.storage.int.rabe.ch 10.132.16.7 server-007.storage.int.rabe.ch [root@server-005 ~]# ssh ovirt-engine-test.admin.int.rabe.ch root(a)ovirt-engine-test.admin.int.rabe.ch's password: Web console: https://ovirt-engine-test.admin.int.rabe.ch:9090/ or https://192.168.1.97:9090/ Last login: Mon Apr 18 11:33:53 2022 from 192.168.1.1 [root@ovirt-engine-test ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 00:16:3e:58:7a:a3 brd ff:ff:ff:ff:ff:ff inet 192.168.1.97/24 brd 192.168.1.255 scope global dynamic noprefixroute eth0 valid_lft 2313sec preferred_lft 2313sec inet6 fe80::216:3eff:fe58:7aa3/64 scope link valid_lft forever preferred_lft forever Thank you for any tips for debugging. Jonas

5 7

Unable to install oVirt on RHEL7.5
by SS00514758＠techmahindra.com 16 Jan '26

16 Jan '26

Hi All, I am unable to install oVirt on RHEL7.5, to install it I am taking reference of below link, https://www.ovirt.org/documentation/install-guide/chap-Installing_oVirt.html But though it is not working for me, couple of dependencies is not getting installed, and because of this I am not able to run the ovirt-engine, below are the depencies packages that unable to install, Error: Package: collectd-write_http-5.8.0-6.1.el7.x86_64 (@ovirt-4.2-centos-opstools) Requires: collectd(x86-64) = 5.8.0-6.1.el7 Removing: collectd-5.8.0-6.1.el7.x86_64 (@ovirt-4.2-centos-opstools) collectd(x86-64) = 5.8.0-6.1.el7 Updated By: collectd-5.8.1-1.el7.x86_64 (epel) collectd(x86-64) = 5.8.1-1.el7 Available: collectd-5.7.2-1.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.7.2-1.el7 Available: collectd-5.7.2-3.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.7.2-3.el7 Available: collectd-5.8.0-2.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.8.0-2.el7 Available: collectd-5.8.0-3.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.8.0-3.el7 Available: collectd-5.8.0-5.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.8.0-5.el7 Help me to install this. Looking forward to resolve this issue. Regards Sumit Sahay

8 10

Unable to upload or download iso via admin portal
by Igor Filipovic 10 Dec '25

10 Dec '25

Hi, I'm having a trouble on fresh 4.4.10.7 installation (on oracle linux), I'm not able to upload or download any file using storage domain upload image function. I've imported CA certificate and have tried on several browsers (firefow, chrome,edge), on different computers (and browsers are green - claiming that I'm securely connected), but I'm always getting error regarding CA certificate when I test connection, or when I try to upload ISO image. I've tried to upload ISO image via cli commands (upload_disk.py), and that scenario was successful, however this method It is not very convenient for my co-workers. I have 5 physical hosts, one is dedicated to run ovirt-engine, and other 4 are kvm hypervisors. When I try to upload ISO this is what engine.log logs: 2023-04-08 11:00:28,339+02 INFO [org.ovirt.engine.core.bll.storage.disk.image.TransferImageStatusCommand] (default task-2) [f6b62add-0a0c-45ee-a985-a76171843382] Running command: TransferImageStatusCommand internal: false. Entities affected : ID: 1eb97088-b805-4616-af55-0ac9d1d7dfbe Type: SystemAction group CREATE_DISK with role type USER 2023-04-08 11:00:28,340+02 INFO [org.ovirt.engine.core.bll.storage.disk.image.ImageTransferUpdater] (default task-2) [f6b62add-0a0c-45ee-a985-a76171843382] Updating image transfer a78b18c5-e395-4c29-aa5c-15ffff8a1cb6 (image 4f758325-ac11-4071-a9fa-d180425e8604) phase to Paused by System (message: 'Sent 0MB') 2023-04-08 11:00:28,363+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-2) [f6b62add-0a0c-45ee-a985-a76171843382] EVENT_ID: UPLOAD_IMAGE_NETWORK_ERROR(1,062), Unable to upload image to disk 4f758325-ac11-4071-a9fa-d180425e8604 due to a network error. Ensure ovirt-engine's CA certificate is registered as a trusted CA in the browser. The certificate can be fetched from https://engine-dr.somedomain/ovirt-engine/services/pki-resource?resource=ca… 2023-04-08 11:00:28,363+02 INFO [org.ovirt.engine.core.bll.storage.disk.image.TransferImageStatusCommand] (default task-2) [f6b62add-0a0c-45ee-a985-a76171843382] Running command: TransferImageStatusCommand internal: false. Entities affected : ID: 1eb97088-b805-4616-af55-0ac9d1d7dfbe Type: SystemAction group CREATE_DISK with role type USER Can you please point me in some direction to try to fix this? Thanks, and best regards Igor

5 5

Installing oVirt on RHEL vs CentOS Stream, Alma or Rocky Linux
by Richard W.M. Jones 07 Oct '25

07 Oct '25

I'm still struggling to get oVirt installed. It absolutely will not install on RHEL 8, the documentation here is flat out wrong: https://www.ovirt.org/documentation/installing_ovirt_as_a_standalone_manage… javapackages-tools is not a module that exists in RHEL 8. Apparently it's a CentOS PowerTools module. Since original CentOS no longer really exists either, does anyone have any opinions or experience with installing oVirt on any of: - CentOS Stream 8 - Alma Linux 8.5 - Rocky Linux Alma in particular looks like a straight replacement for old CentOS. Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com virt-top is 'top' for virtual machines. Tiny program with many powerful monitoring features, net stats, disk stats, logging, etc. http://people.redhat.com/~rjones/virt-top

8 10

Error when deploy Ovirt4.4 Hosted Engine
by staybox＠gmail.com 17 Feb '25

17 Feb '25

Hello, I get error, need help. [ ERROR ] fatal: [localhost]: FAILED! => {"msg": "The conditional check 'not ipv6_deployment|bool and route_rules_ipv4.stdout | from_json | selectattr('priority', 'equalto', 100) | selectattr('dst', 'equalto', virbr_cidr_ipv4 | ipaddr('address') ) | list | length == 0' failed. The error was: error while evaluating conditional (not ipv6_deployment|bool and route_rules_ipv4.stdout | from_json | selectattr('priority', 'equalto', 100) | selectattr('dst', 'equalto', virbr_cidr_ipv4 | ipaddr('address') ) | list | length == 0): 'dict object' has no attribute 'dst'\n\nThe error appears to be in '/usr/share/ansible/collections/ansible_collections/ovirt/ovirt/roles/hosted_engine_setup/tasks/bootstrap_local_vm/01_prepare_routing_rules.yml': line 81, column 5, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n changed_when: true\n - name: Add IPv4 inbound route rules\n ^ here\n"}

4 4

How to list all snapshots?
by jorgevisentini＠gmail.com 14 Feb '25

14 Feb '25

Hello everyone! First, I would like to thank everyone involved in this wonderful project. I leave here my sincere thanks! Does anyone know if it is possible to list all snapshots automatically? It can be by ansible, python, shell... any way that helps to list them all without having to enter Domain by Domain. Thank you all!

4 3

snapshot solution: Existing snapshots that were taken after this one will be erased.
by dhanaraj.ramesh＠yahoo.com 29 Jan '25

29 Jan '25

Hi Team, when I want to commit the older snapshots I'm getting warning stating " Existing snapshots that were taken after this one will be erased.". is there any way we can retain the latest snapshots as is in the chain? I knew cloning and template export options are there to secure that latest snapshot data but these are will consume additional space in storage and take time.

4 3

Restart oVirt-Engine
by Jeremey Wise 10 Jan '25

10 Jan '25

How ,without reboot of hosting system, do I restart the oVirt engine? # I tried below but do not seem to effect the virtual machine [root@thor iso]# systemctl restart ov ovirt-ha-agent.service ovirt-imageio.service ovn-controller.service ovs-delete-transient-ports.service ovirt-ha-broker.service ovirt-vmconsole-host-sshd.service ovsdb-server.service ovs-vswitchd.service [root@thor iso]# # You cannot restart the VM " HostedEngine " as it responses: Error while executing action: HostedEngine: - Cannot restart VM. This VM is not managed by the engine. Reason is I had to do some work on a node. Reboot it.. it is back up.. network is all fine.. Cockpit working fine... and gluster fine.. But oVirt-Engine refuses to accept the node is up. -- p <jeremey.wise(a)gmail.com>enguinpages

4 4

Host deploy failure: Configure OVN for oVirt
by stephan.badenhorst＠fnb.co.za 05 Jan '25

05 Jan '25

Good day, I am running into a problem during host deploy via the oVirt engine GUI since upgrading to ovirt-engine-4.5.5-1.el8. The "Configure OVN for oVirt" task seem to fail when trying to run the vdsm-tool ovn-config command. Host deploy used to work fine when the engine was on version 4.5.4. Anyone that can guide me on the right path to get past this issue? Does not seem to be a new problem - https://lists.ovirt.org/archives/list/users@ovirt.org/thread/IDLGSBQFX35EHH… Log extract: 2024-02-01 14:48:19 SAST - TASK [ovirt-provider-ovn-driver : Configure OVN for oVirt] ********************* . . . "stdout" : "fatal: [mob-r1-l-ovirt-aa-1-23.x.fnb.co.za]: FAILED! => {\"changed\": true, \"cmd\": [\"vdsm-tool\", \"ovn-config\", \"192.168.2.100\", \"host23.mydomain.com\"], \"delta\": \"0:00:00.538143\", \"end \": \"2024-02-01 14:48:20.596823\", \"msg\": \"non-zero return code\", \"rc\": 1, \"start\": \"2024-02-01 14:48:20.058680\", \"stderr\": \"Traceback (most recent call last):\\n File \\\"/usr/lib/python3.6/site-packages/vdsm/t ool/ovn_config.py\\\", line 117, in get_network\\n return networks[net_name]\\nKeyError: 'host23.mydomain.com'\\n\\nDuring handling of the above exception, another exception occurred:\\n\\nTraceback (most rec ent call last):\\n File \\\"/usr/bin/vdsm-tool\\\", line 195, in main\\n return tool_command[cmd][\\\"command\\\"](*args)\\n File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 63, in ovn_config\\n ip_address = get_ip_addr(get_network(network_caps(), net_name))\\n File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 119, in get_network\\n raise NetworkNotFoundError(net_name)\\nvdsm.tool.ovn _config.NetworkNotFoundError: host23.mydomain.com\", \"stderr_lines\": [\"Traceback (most recent call last):\", \" File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 117, in get_network \", \" return networks[net_name]\", \"KeyError: 'host23.mydomain.com'\", \"\", \"During handling of the above exception, another exception occurred:\", \"\", \"Traceback (most recent call last):\", \" File \ \\"/usr/bin/vdsm-tool\\\", line 195, in main\", \" return tool_command[cmd][\\\"command\\\"](*args)\", \" File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 63, in ovn_config\", \" ip_address = get_ip_addr(get_network(network_caps(), net_name))\", \" File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 119, in get_network\", \" raise NetworkNotFoundError(net_name)\", \"vdsm.tool.ovn_config. NetworkNotFoundError: host23.mydomain.com\"], \"stdout\": \"\", \"stdout_lines\": []}", Thanks in advance!! Stephan

5 5

Unable to access ovirt Admin Screen from ovirt Host
by louisb＠ameritech.net 08 Dec '24

08 Dec '24

I've reinstalled ovirt 4.4 on my server remotely via cockpit terminal. I'm able to access the ovirt admin screen remotely from the laptop that I used for the install. However, using the same URL I'm unable to gain access to the admin screen. Following the instruction in the documentation I've modified the file: /etc/ovirt-engine/engine.conf.d/99-custom-sso-setup.conf, to reflect the DNS name and I enter in the IP address. But I'm still unable to access the screen from the server console. What else needs to change in order to gain access from the server console? Thanks

5 8

SPM and Task error ...
by Enrico 23 Nov '24

23 Nov '24

Hi all, my ovirt cluster has got 3 Hypervisors runnig Centos 7.5.1804 vdsm is 4.20.39.1-1.el7, ovirt engine is 4.2.4.5-1.el7, the storage systems are HP MSA P2000 and 2050 (fibre channel). I need to stop one of the hypervisors for maintenance but this system is the storage pool manager. For this reason I decided to manually activate SPM in one of the other nodes but this operation is not successful. In the ovirt engine (engine.log) the error is this: 2019-07-25 12:39:16,744+02 INFO [org.ovirt.engine.core.bll.storage.pool.ForceSelectSPMCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] Running command: ForceSelectSPMCommand internal: false. Entities affected : ID: 81c9bd3c-ae0a-467f-bf7f-63ab30cd8d9e Type: VDSAction group MANIPULATE_HOST with role type ADMIN 2019-07-25 12:39:16,745+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, SpmStopOnIrsVDSCommand( SpmStopOnIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false'}), log id: 37bf4639 2019-07-25 12:39:16,747+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, ResetIrsVDSCommand( ResetIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', vdsId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', ignoreStopFailed='false'}), log id: 2522686f 2019-07-25 12:39:16,749+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, SpmStopVDSCommand(HostName = infn-vm05.management, SpmStopVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7'}), log id: 1810fd8b 2019-07-25 12:39:16,758+02 *ERROR* [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] SpmStopVDSCommand::Not stopping SPM on vds 'infn-vm05.management', pool id '18d57688-6ed4-43b8-bd7c-0665b55950b7' as there are uncleared tasks 'Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e', status 'running'' 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, SpmStopVDSCommand, log id: 1810fd8b 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, ResetIrsVDSCommand, log id: 2522686f 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, SpmStopOnIrsVDSCommand, log id: 37bf4639 2019-07-25 12:39:16,760+02 *ERROR* [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] EVENT_ID: USER_FORCE_SELECTED_SPM_STOP_FAILED(4,096), Failed to force select infn-vm07.management as the SPM due to a failure to stop the current SPM. while in the hypervisor (SPM) vdsm.log: 2019-07-25 12:39:16,744+02 INFO [org.ovirt.engine.core.bll.storage.pool.ForceSelectSPMCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] Running command: ForceSelectSPMCommand internal: false. Entities affected : ID: 81c9bd3c-ae0a-467f-bf7f-63ab30cd8d9e Type: VDSAction group MANIPULATE_HOST with role type ADMIN 2019-07-25 12:39:16,745+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, SpmStopOnIrsVDSCommand( SpmStopOnIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false'}), log id: 37bf4639 2019-07-25 12:39:16,747+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, ResetIrsVDSCommand( ResetIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', vdsId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', ignoreStopFailed='false'}), log id: 2522686f 2019-07-25 12:39:16,749+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, SpmStopVDSCommand(HostName = infn-vm05.management, SpmStopVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7'}), log id: 1810fd8b 2019-07-25 12:39:16,758+02 *ERROR* [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] SpmStopVDSCommand::Not stopping SPM on vds 'infn-vm05.management', pool id '18d57688-6ed4-43b8-bd7c-0665b55950b7' as there are uncleared tasks 'Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e', status 'running'' 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, SpmStopVDSCommand, log id: 1810fd8b 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, ResetIrsVDSCommand, log id: 2522686f 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, SpmStopOnIrsVDSCommand, log id: 37bf4639 2019-07-25 12:39:16,760+02 *ERROR* [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] EVENT_ID: USER_FORCE_SELECTED_SPM_STOP_FAILED(4,096), Failed to force select infn-vm07.management as the SPM due to a failure to stop the current SPM. 2019-07-25 12:39:18,660+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period time and should be polled. Pre-polling period is 60000 millis. 2019-07-25 12:39:18,660+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period time and should be polled. Pre-polling period is 60000 millis. 2019-07-25 12:39:18,750+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period time and should be polled. Pre-polling period is 60000 millis. 2019-07-25 12:39:18,750+02 *ERROR* [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] BaseAsyncTask::logEndTaskFailure: Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' (Parent Command 'Unknown', Parameters Type 'org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters') ended with failure: 2019-07-25 12:39:18,750+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: Attempting to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' 2019-07-25 12:39:18,751+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, SPMClearTaskVDSCommand( SPMTaskGuidBaseVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 34ae2b2f 2019-07-25 12:39:18,752+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, HSMClearTaskVDSCommand(HostName = infn-vm05.management, HSMTaskGuidBaseVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: d3a78ad 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, HSMClearTaskVDSCommand, log id: d3a78ad 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, SPMClearTaskVDSCommand, log id: 34ae2b2f 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: At time of attempt to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' the response code was 'TaskStateError' and message was 'Operation is not allowed in this task state: ("can't clean in state running",)'. Task will not be cleaned 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] BaseAsyncTask::onTaskEndSuccess: Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' (Parent Command 'Unknown', Parameters Type 'org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters') ended successfully. 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: Attempting to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' 2019-07-25 12:39:18,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, SPMClearTaskVDSCommand( SPMTaskGuidBaseVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 42de0c2b 2019-07-25 12:39:18,759+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, HSMClearTaskVDSCommand(HostName = infn-vm05.management, HSMTaskGuidBaseVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 4895c79c 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, HSMClearTaskVDSCommand, log id: 4895c79c 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, SPMClearTaskVDSCommand, log id: 42de0c2b 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: At time of attempt to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' the response code was 'TaskStateError' and message was 'Operation is not allowed in this task state: ("can't clean in state running",)'. Task will not be cleaned 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period time and should be polled. Pre-polling period is 60000 millis. 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.bll.tasks.AsyncTaskManager] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Cleaning zombie tasks: Clearing async task 'Unknown' that started at 'Fri May 03 14:48:50 CEST 2019' 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: Attempting to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' 2019-07-25 12:39:18,765+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, SPMClearTaskVDSCommand( SPMTaskGuidBaseVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: da77af2 2019-07-25 12:39:18,766+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, HSMClearTaskVDSCommand(HostName = infn-vm05.management, HSMTaskGuidBaseVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 530694fb 2019-07-25 12:39:18,771+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, HSMClearTaskVDSCommand, log id: 530694fb 2019-07-25 12:39:18,771+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, SPMClearTaskVDSCommand, log id: da77af2 2019-07-25 12:39:18,771+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: At time of attempt to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' the response code was 'TaskStateError' and message was 'Operation is not allowed in this task state: ("can't clean in state running",)'. Task will not be cleaned there is some relation between this error and a task that has remained hanging, from SPM server: # vdsm-client Task getInfo taskID=fdcf4d1b-82fe-49a6-b233-323ebe568f8e { "verb": "prepareMerge", "id": "fdcf4d1b-82fe-49a6-b233-323ebe568f8e" } # vdsm-client Task getStatus taskID=fdcf4d1b-82fe-49a6-b233-323ebe568f8e { "message": "running job 1 of 1", "code": 0, "taskID": "fdcf4d1b-82fe-49a6-b233-323ebe568f8e", "taskResult": "", "taskState": "running" } How can I solve this problem ? Thanks a lot for your help !! Best Regards Enrico -- _______________________________________________________________________ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchetti<at>pg.infn.it _______________________________________________________________________

5 15

Latest 4.5.5 centos node install username password not working.
by antonio.riggio＠mail.com 24 Oct '24

24 Oct '24

I been trying to install 4.5.5 testing and used the node installer iso. I cant login what is the username and password I have tried what others have done in the forums with no luck admin@ovirt . root admin . Also can the engine be installed from the node via the cockpit still? How can I get logged in to do this? I have used 4.3 and didnt have any of these problems. It was really simple to do. Any suggestions? grazie

4 8

Storage Domain Not synchronized, To synchronize them, please move them to maintenance and then activate.
by Arup Jyoti Thakuria 09 Sep '24

09 Sep '24

Dear All, In our Ovirt Engine Infrastructure, recently we have received an alert for one of our "Storage Domain" The alert is as mentioned below---- =================================== Storage domains with IDs [fb34e5b7-e850-4d66-ab47-3011d2000338] could not be synchronized. To synchronize them, please move them to maintenance and then activate. ========================================================== What is the consequence of this alert, if we ignore this what can happen to the infra, are we going to face any issue with the VMs, currently this infra is under production

2 1

oVirt networks
by Enrico Becchetti 28 Aug '24

28 Aug '24

Dear all, Ineed your help to understand how to configure the network of a new oVirt cluster. Mynew system will have a 4.3 engine thatruns in a virtual machine, andsome Dell R7525 AMD EPYC hypervisors, eachholding two 4-port PCI network cards. These servers will have node-ovirt image again in version 4.3. As for the network, there are two HPE Aruba 2540G, non-stackable, with 24 1Gbs ports and 2 10Gbs uplinks to the star center. This is a simplified scheme: My goal is to make the most of the server's 8 ethernet interfaces to have both reliability and maximum possible throughput. This cluster will have two virtual networks, one forovirt management and one for the traffic of individual virtual machines. With that said here's what my idea is. I would like to have two links aggregated by 4Gbs, one for ovrtmgt and the other for vmnet. With the ovirt web interface I can createan active-passive "Mode 1" bond, but this won'tallow me to go beyond 1Gbs. Alternatively I could create a "Mode 4" bond 802.3ad but unfortunately the switches are not stacked and therefore not even this solution applies. This is an example with active passive configuration: Can you tell me if ovirt can generate//nested bonds? Or do you have other solutions ? Thanks a lot ! Best Regards Enrico -- _______________________________________________________________________ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Skype:enrico_becchetti Mail: Enrico.Becchetti<at>pg.infn.it Pagina web personale: https://www.pg.infn.it/home/enrico-becchetti/ ______________________________________________________________________

5 6

boot from cdrom & error code 0005
by edp＠maddalena.it 21 Aug '24

21 Aug '24

Hi. I have created a new storage domain (data domain, storage type nfs) to use it to upload iso images. I have so uploaded a new iso and then attach the iso to a new vm. But when I try to boot the vm I obtain this error: booting from dvd/cd... boot failed: could not read from cdrom (code 0005) no bootable device The iso file has been uploaded with success in the data storage domain and so the vm lets my attach the iso to the vm in the boot settings. Can you help me? Thank you

4 6

VM Migration Failed
by KSNull Zero 10 Jul '24

10 Jul '24

Running oVirt 4.4.5 VM cannot migrate between hosts. vdsm.log contains the following error: libvirt.libvirtError: operation failed: Failed to connect to remote libvirt URI qemu+tls://ovhost01.local/system: authentication failed: Failed to verify peer's certificate Certificates on hosts was renewed some time ago. How this issue can be fixed ? Thank you.

4 6

How to re-enroll (or renew) host certificates for a single-host hosted-engine deployment?
by Derek Atkins 28 Jun '24

28 Jun '24

Hi, I've got a single-host hosted-engine deployment that I originally installed with 4.0 and have upgraded over the years to 4.3.10. I and some of my users have upgraded remote-viewer and now I get an error when I try to view the console of my VMs: (remote-viewer:8252): Spice-WARNING **: 11:30:41.806: ../subprojects/spice-common/common/ssl_verify.c:477:openssl_verify: Error in server certificate verification: CA signature digest algorithm too weak (num=68:depth0:/O=<My Org Name>/CN=<Host's Name>) I am 99.99% sure this is because the old certs use SHA1. I reran engine-setup on the engine and it asked me if I wanted to renew the PKI, and I answered yes. This replaced many[1] of the certificates in /etc/pki/ovirt-engine/certs on the engine, but it did not update the Host's certificate. All the documentation I've seen says that to refresh this certificate I need to put the host into maintenance mode and then re-enroll.. However I cannot do that, because this is a single-host system so I cannot put the host in local mode -- there is no place to migrate the VMs (let alone the Engine VM). So.... Is there a command-line way to re-enroll manually and update the host certs? Or some other way to get all the leftover certs renewed? Thanks, -derek [1] Not only did it not update the Host's cert, it did not update any of the vmconsole-proxy certs, nor the certs in /etc/pki/ovirt-vmconsole/, and obviously nothing in /etc/pki/ on the host itself. -- Derek Atkins 617-623-3745 derek(a)ihtfp.com www.ihtfp.com Computer and Internet Security Consultant

8 16

4.5.4 with Ceph only storage
by Maurice Burrows 25 Jun '24

25 Jun '24

Hey ... A long story short ... I have an existing Red Hat Virt / Gluster hyperconverged solution that I am moving away from. I have an existing Ceph cluster that I primarily use for OpenStack and a small requirement for S3 via RGW. I'm planning to build a new oVirt 4.5.4 cluster on RHEL9 using Ceph for all storage requirements. I've read many online articles on oVirt and Ceph, and they all seem to use the Ceph iSCSI gateway, which is now in maintenance, so I'm not real keen to commit to iSCSI. So my question is, IS there any reason I cannot use CephFS for both hosted-engine and as a data storage domain? I'm currently running Ceph Pacific FWIW. Cheers

5 10

i can't access console with noVNC or VNC client(console.vv)
by z84614242＠163.com 14 May '24

14 May '24

i installed the ovirt 4.5 engine on centos stream 9 and add a ovirt node(ovirt node 4.5 iso) to this engine. i am going to run my vm on this node. i follow the instruction to create the data center, the cluster, the storage domain, upload the image. everything is fine. and after i create a vm with ubuntu image attach, i found that i can't visit the console. when i using the noVNC, it says "Something went wrong, connection is closed", when i visit vnc with virt-viewver, is says "Failed to complete handshake Error in the pull function". i try to change the console type to Bochs one and it appear the same. i change to QXL mode and the vm can't start any more. i check the log, it says "unsupported configuration: domain configuration does not support video model 'qxl'". so now i can't visit my vm by anyway. i deploy the engine follow the official instruction and keep mostly option default but why still have this issue. why the noVNC says "Something went wrong" instead of telling me what is actually wrong

2 1

Oracle Virtualization Manager 4.5 anyone?
by Thomas Hoberg 29 Apr '24

29 Apr '24

Redhat's decision to shut down RHV caught Oracle pretty unprepared, I'd guess, who had just shut down their own vSphere clone in favor of a RHV clone a couple of years ago. Oracle is even less vocal about their "Oracle Virtualization" strategy, they don't even seem to have a proper naming convention or branding. But they have been pushing out OV releases without a publicly announced EOL almost a year behind Redhat for the last years. And after a 4.4 release in September 22, a few days ago on December 12th actually a release 4.5 was made public. I've operated oVirt 4.3 with significant quality issues for some years and failed to make oVirt 4.4 work with any degree of acceptable stability but Oracle's variant of 4.4 proved to be rather better than 4.3 on CentOS7 with no noticable bugs, especially in the Hyperconverged setup that I am using with GlusterFS. I assumed that this was because Oracle based their 4.4 in fact on RHV 4.4 and not oVirt, but since they're not telling, who knows? One issue with 4.4 was that Oracle is pushing their UE-Kernel and that created immediate issues e.g. with VDO missing modules for UEK and other stuff, but that was solved easily enough by using the RHEL kernel. With 4.5 Oracle obviously can't use RHV 4.5 as a base, because there is no such thing with RHV declared EOL and according to Oracle their 4.5 is based on oVirt 4.5.4, which made the quality of that release somewhat questionable, but perhaps they have spent the year that has passed since productively killing bugs... only to be caught by surprise again, I presume, by an oVirt release 4.5.5 on December 1st, that no one saw coming! Long story slightly shorter, I've been testing Oracle's 4.5 variant a bit and it's not without issues. But much worse, Oracle's variant of oVirt seems to be entirely without any community that I could find. Now oVirt has been a somewhat secret society for years, but compared to what's going on with Oracle this forum is teaming with life! So did I just not look around enough? Is there a secret lair where all those OV users are hiding? Anyhow, here is what I've tested so far and where I'd love to have some feedback: 1. Setting up a three node HCI cluster from scratch using OL8.9 and OV 4.5 Since I don't have extra physical hardware for a 3 node HCI I'm using VMware workstation 17.5 on a Workstation running Windows 2022, a test platform that has been working for all kinds of virtualization tests from VMware ESXi, via Xcp-ng and ovirt. Created three VMs with OL8.9 minimal and then installed OV 4.5. I used the UEK default kernels and then had an issue when Ansible is trying to create the (local) management engine: the VM simply could not reach the Oracle repo servers to install the packages inside the ME. Since that VM is entirely under the control of Ansible and no console access of any type is possible in that installation phase, I couldn't do diagnostics. But with 4.4 I used to have similar issues and there switching back to the Redhat kernel for the ME (and the hosts) resolved them. But with 4.5 it seems that UEK has become a baked-in dependency: the OV team doesn't even seem to do any testing with the Redhat kernel any more. Or not with the HCI setup, which has become deprecated somewhere in oVirt 4.4... Or not with the Cockpit wizard, which might be in a totally untested state, or.... Doing the same install on OL 8.9 with OV 4.4, however, did work just fine and I was even able to update to 4.5 afterwards, which was a nice surprise... ...that I could not repeat on my physical test farm using three Atoms. There switching to the UEK kernel on the hosts caused issues, hosts were becoming unresponsive, file systems inaccessible, even if they were perfectly fine at the Gluster CLI level and in the end the ME VM simply would not longer start. Switching back to the Redhat kernel resolved things there. In short, switching between the Redhat kernel and UEK, which should be 100% transparent to all things userland including hypervisors, doesn't work. But my attempts to go with a clean install of 4.5 on a Redhat kernel or UEK is also facing issues. So far the only thing that has worked was a single node HCI install using UEK and OV 4.5 and upgrading to OV 4.5 on a virtualized triple node OV 4.4 HCI cluster. Anyone else out there trying these things? I was mostly determined to move to Proxmox VE, but Oracle's OV 4.5 seemed to be handing a bit of a life-line to oVirt and the base architecture is just much more powerful (or less manual) than Proxmox, which doesn't have a management engine.

8 12

Changing disk QoS causes segfault with IO-Threads enabled (oVirt 4.3.0.4-1.el7)
by jloh＠squiz.net 23 Apr '24

23 Apr '24

We recently upgraded to 4.3.0 and have found that when changing disk QoS settings on VMs whilst IO-Threads is enabled causes them to segfault and the VM to reboot. We've been able to replicate this across several VMs. VMs with IO-Threads disabled/turned off do not segfault when changing the QoS. Mar 1 11:49:06 srvXX kernel: IO iothread1[30468]: segfault at fffffffffffffff8 ip 0000557649f2bd24 sp 00007f80de832f60 error 5 in qemu-kvm[5576498dd000+a03000] Mar 1 11:49:06 srvXX abrt-hook-ccpp: invalid number 'iothread1' Mar 1 11:49:11 srvXX libvirtd: 2019-03-01 00:49:11.116+0000: 13365: error : qemuMonitorIORead:609 : Unable to read from monitor: Connection reset by peer Happy to supply some more logs to someone if they'll help but just wondering whether anyone else has experienced this or knows of a current fix other than turning io-threads off. Cheers.

4 3

virt-v2v cannot authenticate with oVirt engine API with OAuth2
by malcolm.strydom＠pacxa.com 23 Mar '24

23 Mar '24

I've been reading through archives but not able to find what i need. Essentially what I'm trying to do is migrate a larger number of VMs from our OVM environment to a new OLVM setup. In an effort to reduce lots of replication and copying of the disk image (export, convert, copy over, import etc.) I found this article which shows a pretty slick way to do it in one shot https://blogs.oracle.com/scoter/post/how-to-migrate-oracle-vm-to-oracle-lin… The main command behind it all is the virt-v2v that makes it possible. It looks something like this: virt-v2v -i libvirtxml vm-test1.xml -o rhv-upload -oc https://<OLVM-server>/ovirt-engine/api -os <my storage> -op /tmp/ovirt-admin-password -of raw -oo rhv-cluster=Default -oo rhv-cafile=/root/ca.pem The problem I'm having is I cannot authenticate with my new OLVM server at the ovirt-engine/api URL. Since user/password is depricated and you must use OAuth 2.0 with a token I'm stuck. I have OLVM 4.5.4-1.0.27.el8 and from what I've read in oVirt 4.5 (not sure what version it started) they use keycloak oAuth 2.0 and the older ovirt-aaa-jdbc-tool is now deprecated. In doing some testing I found I can use curl and authenticate against the ovirt-engine/api and get a token like this: OVIRT_ENGINE_URL="https://<myolvm1>/ovirt-engine" USERNAME="admin@ovirt@internalsso" PASSWORD="<mypassword>" CLUSTER_NAME="Default" TOKEN=$(curl -k -X POST -H "Accept: application/json" -H "Content-Type: application/x-www-form-urlencoded" -d "grant_type=password &username=$USERNAME&password=$PASSWORD&scope=ovirt-app-api" $OVIRT_ENGINE_URL/sso/oauth/token | jq -r '.access_token') I was then able to query the API to validate my token works curl -k -H "Accept: application/json" -H "Authorization: Bearer $TOKEN" "$OVIRT_ENGINE_URL/api/clusters?search=name=$CLUSTER_NAME" The problem is virt-v2v does not support posting any form information or the token to authenticate. Best I can tell the -oc option is strictly the URL and if you want a username in there it's in the form of https://<name>@<server>. So even if I wrote a script and used curl to authenticate and get a token I still can't find a way to make virt-v2v use it. So I'm stuck how do I get virt-v2v working? Is there a way to re-enable the deprecated user/pass method of accessing the ovirt-engine/api ? or as a last resort a way to get virt-v2v supporting the token? Thanks for any insight Malcolm

3 5

Deploy oVirt Engine fail behind proxy
by Matteo Bonardi 22 Mar '24

22 Mar '24

Hi, I am trying to deploy the ovirt engine following self-hosted engine installation procedure on documentation. Deployment servers are behind a proxy and I have set it in environment and in yum.conf before run deploy. Deploy fails because ovirt engine vm cannot resolve AppStream repository url: [ INFO ] TASK [ovirt.engine-setup : Install oVirt Engine package] [ ERROR ] fatal: [localhost -> ovirt-manager.mydomain]: FAILED! => {"changed": false, "msg": "Failed to download metadata for repo 'AppStream': Cannot prepare internal mirrorlist: Curl error (6): Couldn't resolve host name for http://mirrorlist.centos.org/?release=8&arch=x86_64&repo=AppStream&infra=st… [Could not resolve host: mirrorlist.centos.org]", "rc": 1, "results": []} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up [ INFO ] Cleaning temporary resources [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fetch logs from the engine VM] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set destination directory path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Create destination directory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set local_vm_disk_path] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Give the vm time to flush dirty buffers] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Copy engine logs] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove local vm dir] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove temporary entry in /etc/hosts for the local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Clean local storage pools] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Destroy local storage-pool {{ he_local_vm_dir | basename }}] [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine local storage-pool {{ he_local_vm_dir | basename }}] [ INFO ] TASK [ovirt.hosted_engine_setup : Destroy local storage-pool {{ local_vm_disk_path.split('/')[5] }}] [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine local storage-pool {{ local_vm_disk_path.split('/')[5] }}] [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20201109165237.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20201109164244-b3e8sd.log How I can set proxy for the engine vm? Ovirt version: [root@myhost ~]# rpm -qa | grep ovirt-engine-appliance ovirt-engine-appliance-4.4-20200916125954.1.el8.x86_64 [root@myhost ~]# rpm -qa | grep ovirt-hosted-engine-setup ovirt-hosted-engine-setup-2.4.6-1.el8.noarch OS version: [root@myhost ~]# cat /etc/centos-release CentOS Linux release 8.2.2004 (Core) [root@myhost ~]# uname -a Linux myhost.mydomain 4.18.0-193.28.1.el8_2.x86_64 #1 SMP Thu Oct 22 00:20:22 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux Thanks for the help. Regards, Matteo

7 20

Ovirt 4.5 HA over NFS fails when a single host goes down
by youssef.khristo＠elsewedyintel.com 13 Mar '24

13 Mar '24

Greetings, we have recently installed ovirt as a hosted-engine with high availability on six nodes over NFS storage (no Gluster), with power management through an on-board IPMI device, and the setup was successful. All the nodes (from Supermicro) are identical in every aspect, so no hardware differences exist and no modifications to the servers' hardware were performed. The hosted-engine was deployed on a second host, where two of the six hosts only were required to host the HE VM. The network interface on each node is bonded between two physical fiber optics NICs in LACP mode with a VLAN on top, serving as the sole networking interface for the server/node, no separate VM or storage networks were needed, as the host OS, hosted-engine vm, and storage are required to be on the same network and VLAN. We started by testing the high-availability of the hosted-engine VM (as it was deployed on two of the six nodes) by rebooting or powering off one of the hosts, and the VM would migrate successfully to the second HE node. The main goal of our experiments is to test the robustness of the setup, as it is required for the cluster to remain functional even when up to two hosts are brought down (whether due to a network or power issue), however, when rebooting or powering off one of the hosts, the HE VM goes down and takes the entire cluster with it, where we can't even access the web portal. Once the host is rebooted, the HE VM and the cluster becomes functional again. Sometimes the HE VM stays down for a set amount of time (5 to 6 minutes) and then goes back up, and sometimes it goes down until the problematic host is back up. This behavior happens to other VMs as well not the the HE. We suspected an issue with the NFS storage, however, during ovirt operation it is being mounted properly over /rhev/data-center/mnt/<nfs:directory>, while the expected behavior is for the cluster to stay operational and any other VMs to be migrated to other hosts. During one of the tests, we tried to mount the NFS storage on a different directory and there was no problem, we were even able to perform commands such as ls without any issues, as well as writing a text file at the directory's root, and be able to modify it normally. We suspected a couple of things the first being that the HE is unable to fence the problematic host (the one we took down), however, power management is setup properly. The other thing we suspected is the cluster hosts (after taking down one of them) are unable to acquire storage lease, which is weird since the host in question is down and non-operational, hence no locks should be in place. The reason behind this suspicion is the following two errors that we receive frequently when one host or more goes down from the engine\ovirt-engine\engine.log file: 1- "EVENT_ID: VM_DOWN_ERROR(119), VM HostedEngine is down with error. Exit message: resource busy: Failed to acquire lock: Lease is held by another host." 2- "[<id>] Command 'GetVmLeaseInfoVDSCommand( VmLeaseVDSParameters:{expectedEngineErrors='[NoSuchVmLeaseOnDomain]', storagePoolId='<pool-id>', ignoreFailoverLimit='false', leaseId='<lease-id>', storageDomainId='<domain-id>'})' execution failed: IRSGenericException: IRSErrorException: No such lease: 'lease=<lease-id>'" This is a third warning from the /var/log/vdsm/vdsm.log file 1- "WARN (check/loop) [storage.check] Checker '/rhev/data-center/mnt/<nfs-domain:/directory>/<id>/dom_md/metadata' is blocked for 310.00 seconds (check:265)" All the tests are done without setting nodes into maintenance mode as we are simulating an emergency situation. No HE configuration were modified via the config-engine command, the default values are used. Is this a normal behavior? Are we missing something? Do we need to tweak a certain configuration using the config-engine command to get a better behavior (e.g., shorter down period)? Best regards

5 6

Repo for mirrorlist.ovirt.org not working
by nicolas＠devels.es 01 Mar '24

01 Mar '24

Hi, We recently noticed that https://mirrorlist.ovirt.org/mirrorlist-ovirt-4.5-el8 is returning a 503 error: $ LANG=C wget https://mirrorlist.ovirt.org/mirrorlist-ovirt-4.5-el8 --2024-02-14 12:01:10-- https://mirrorlist.ovirt.org/mirrorlist-ovirt-4.5-el8 Resolving mirrorlist.ovirt.org (mirrorlist.ovirt.org) 8.43.85.224, 2620:52:3:1:5054:ff:fef7:14a9 Connecting to mirrorlist.ovirt.org (mirrorlist.ovirt.org)|8.43.85.224|:443... connected. HTTP request sent, awaiting response... 503 Service Unavailable 2024-02-14 12:02:10 ERROR 503: Service Unavailable. Is this some scheduled downtime or is it an error? Thanks.

7 6