- Devel - oVirt List Archives

Fwd: [CentOS-announce] Announcing the release of Gluster 5 on CentOS Linux 7 x86_64
by Sandro Bonazzola 06 Dec '18

06 Dec '18

fyi ---------- Forwarded message --------- From: Niels de Vos <ndevos(a)redhat.com> Date: gio 6 dic 2018, 20:00 Subject: [CentOS-announce] Announcing the release of Gluster 5 on CentOS Linux 7 x86_64 To: <centos-announce(a)centos.org> I am happy to announce the General Availability of Gluster 5 for CentOS 7 on x86_64. These packages are following the upstream Gluster Community releases, and will receive monthly bugfix updates. Gluster 5 is expected to receive updates until the end of October 2019. The maintanance and release schedule can be found at: https://www.gluster.org/community/release-schedule/ Users of CentOS 7 can now simply install Gluster 5 with only these two commands: # yum install centos-release-gluster # yum install glusterfs-server The centos-release-gluster package is delivered via CentOS Extras repos. This contains all the metadata and dependency information, needed to install Gluster 5. The actual package that will get installed is centos-release-gluster5. Users of Gluster 4.1 can stay on that release until June 2019. Users of Gluster 4.0 and earlier will need to manually upgrade by uninstalling the centos-release-gluster-legacy package, and replacing it with either the Gluster 5 or 4.1 version. Additional details about the upgrade process are linked in the announcement from the Gluster Community: https://lists.gluster.org/pipermail/announce/2018-October/000115.html We have a quickstart guide specifically built around the packages are available, it makes for a good introduction to Gluster and will help get you started in just a few simple steps, this quick start is available at https://wiki.centos.org/SpecialInterestGroup/Storage/gluster-Quickstart More details about the packages that the Gluster project provides in the Storage SIG is available in the documentation: https://wiki.centos.org/SpecialInterestGroup/Storage/Gluster The centos-release-gluster* repositories offer additional packages that enhance the usability of Gluster itself. Utilities and tools that were working with previous versions of Gluster are expected to stay working fine. If there are any problems, or requests for additional tools and applications to be provided, just send us an email with your suggestions. The current list of packages that is (planned to become) available can be found here: https://wiki.centos.org/SpecialInterestGroup/Storage/Gluster/Ecosystem-pkgs We welcome all feedback, comments and contributions. You can get in touch with the CentOS Storage SIG on the centos-devel mailing list (https://lists.centos.org ) and with the Gluster developer and user communities at https://www.gluster.org/mailman/listinfo , we are also available on irc at #gluster on irc.freenode.net, and on twitter at @gluster . Cheers, Niels de Vos Storage SIG member & Gluster maintainer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce

1 0

[ANN] oVirt 4.3.0 Second Alpha Release is now available for testing
by Sandro Bonazzola 06 Dec '18

06 Dec '18

The oVirt Project is pleased to announce the availability of the Second Alpha Release of oVirt 4.3.0, as of December 6th, 2018 This is pre-release software. This pre-release should not to be used in production. Please take a look at our community page[1] to learn how to ask questions and interact with developers and users. All issues or bugs should be reported via oVirt Bugzilla[2]. This update is the second alpha release of the 4.3.0 version. This release brings more than 80 enhancements and more than 330 bug fixes on top of oVirt 4.2 series. What's new in oVirt 4.3.0? * Q35 chipset, support booting using UEFI and Secure Boot * Skylake-server and AMD EPYC support * New smbus driver in windows guest tools * Improved support for v2v * Tech preview for oVirt on Fedora 28 * Hundreds of bug fixes on top of oVirt 4.2 series * New VM portal details page (see a preview here: https://imgur.com/a/ExINpci) * New Cluster upgrade UI * OVN security groups * IPv6 (static host addresses) * LLDP Labeler * Support for 3.6 and 4.0 data centers, clusters and hosts were removed * Now using PostgreSQL 10 This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later * oVirt Node 4.3 (available for x86_64 only) Experimental tech preview for x86_64 and s390x architectures for Fedora 28 is also included. See the release notes draft [3] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available for both CentOS 7 and Fedora 28 (tech preview). - oVirt Node NG is already available for both CentOS 7 - oVirt Node NG for Fedora 28 (tech preview) is facing build issues on Jenkins and will be released as soon as possible Additional Resources: * Read more about the oVirt 4.3.0 release highlights: http://www.ovirt.org/release/4.3.0/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] https://www.ovirt.org/community/ [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt [3] http://www.ovirt.org/release/4.3.0/ [4] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0

More logs from VNC/qemu/SASL
by Tomasz Barański 06 Dec '18

06 Dec '18

Hello I'm working on supporting VNC console on FIPS-enabled hosts[1]. I made qemu use SASL as authentication method instead of regular passwords. However, no matter what I do, I can't get it to accept credentials provided with a VNC client. Is there a way to get some qemu/SASL logs? I need to understand why the credentials are not accepted. Tomo [1] https://bugzilla.redhat.com/show_bug.cgi?id=1595536

1 0

[VDSM] check-merged failing for years - remove it?
by Nir Soffer 06 Dec '18

06 Dec '18

vdsm check-merged job takes 1.5 hours, and fails 80% of the time. https://jenkins.ovirt.org/job/vdsm_master_check-merged-el7-x86_64/buildTime… Nobody checks these failures or care about them. We are abusing CI resources for no benefit. Can we remove this job? Nir

6 10

planned Jenkins restart
by Evgheni Dereveanchin 06 Dec '18

06 Dec '18

Hi everyone, I'll be performing a planned Jenkins restart within the next hour. No new jobs will be scheduled during this maintenance period. I will inform you once it is over. Regards, Evgheni Dereveanchin

1 1

vdsm has been tagged (v4.30.4)
by Francesco Romani 05 Dec '18

05 Dec '18

_______________________________________________ Devel mailing list -- devel(a)ovirt.org To unsubscribe send an email to devel-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/WUM4SIORNY5RN…

1 0

ovirt-engine has been tagged (ovirt-engine-4.3.0_alpha2)
by Tal Nisan 05 Dec '18

05 Dec '18

1 0

[OST] HE basic suite failing on reposync
by Ales Musil 05 Dec '18

05 Dec '18

Hello, I am trying to run locally he-basic-ansible-suite-master but it keeps failing on reposync: reposync command failed for repoid: ovirt-appliance-master-el7 Any idea what could be wrong? Thank you. Regards, Ales -- ALES MUSIL Associate Software Engineer - rhv network Red Hat EMEA <https://www.redhat.com/> amusil(a)redhat.com IM: amusil <https://red.ht/sig>

3 4

jenkins dead or barely alive?
by Michal Skrivanek 05 Dec '18

05 Dec '18

Hey, it didn’t work well yesterday evening (taking 10+ minutes to trigger CI) and this morning it’s even worse. Logging in to trigger it manually takes ~5 minutes, every action there seems to take ages... Thanks, michal

2 1

[IMPORTANT] Upgrading to PG 10.x in version 4.3 on f28/CentOS7.5 , instructions for developers,, please read before you re-base on master
by Eli Mesika 05 Dec '18

05 Dec '18

Hi We will merge a patch[1] today that will require the upcoming 4.3 version to use Postgres 10 on f28 and Postgres SCL 10 (Software Collections) on CentOS 7.5 * If you are using f28 and creating new DB schema for development (having no 9.x PG data), then you done and this change should be transparent to you. * If you are using f27, have some old 9.x PG data and upgrade to f28, then you will have to upgrade your old PG data after moving to f28 according to the instructions in [2] * If you are using CentOS then you are running PG SCL 9.5 and should upgrade to PG SCL 10 1. Upgrade to CentOS 7.5 (insure that you have the SCL repo [3] after upgrade) 2. #yum update -y # insure that your OS has latest patches 3. #service rh-postgresql95-postgresql stop 4. #yum install rh-postgresql10 rh-postgresql10-postgresql-contrib -y 5. #/opt/rh/rh-postgresql10/root/bin/postgresql-setup --upgrade --upgrade-from="rh-postgresql95-postgresql" # If you have junk sachems, drop them first, the upgrade of each takes time. 6. #service rh-postgresql10-postgresql start # check status to see that it is active 7. #service rh-postgresql10-postgresql enable 8. Insure that your patches are re-based on master latest 9. Remove all <target> binaries created with "#make clean install-dev PREFIX=<target>....." 10. Compile(make install-dev..)/Setup(engine-setup) and run again your patches (git branches you are working on) 11. Insure that basic operations (add new dc/cluster for example) are working 12. Track engine.log / server.log and PG logs for database errors 13. # yum remove rh-postgresql95 rh-postgresql95-postgresql-contrib -y (only if all above is succeed) [1] https://gerrit.ovirt.org/#/c/95100/ [2] https://docs.bmc.com/docs/btco113/migrating-the-data-from-postgresql-9-x-to… [3] https://wiki.centos.org/AdditionalResources/Repositories/SCL If you are developing from a VM then it is always recommended to create a "before upgrade" snapshot of the VM. (I know it is not supported from the user portal but you can ask for access rights only for doing this from your admin on the admin portal. If you have any questions/problems , please contact me Eli Mesika (emesika on IRC) Best Regards Eli

3 2