October 2023 - Users - oVirt List Archives

4.5.4 with Ceph only storage
by Maurice Burrows 25 Jun '24

25 Jun '24

Hey ... A long story short ... I have an existing Red Hat Virt / Gluster hyperconverged solution that I am moving away from. I have an existing Ceph cluster that I primarily use for OpenStack and a small requirement for S3 via RGW. I'm planning to build a new oVirt 4.5.4 cluster on RHEL9 using Ceph for all storage requirements. I've read many online articles on oVirt and Ceph, and they all seem to use the Ceph iSCSI gateway, which is now in maintenance, so I'm not real keen to commit to iSCSI. So my question is, IS there any reason I cannot use CephFS for both hosted-engine and as a data storage domain? I'm currently running Ceph Pacific FWIW. Cheers

5 10

i can't access console with noVNC or VNC client(console.vv)
by z84614242＠163.com 14 May '24

14 May '24

i installed the ovirt 4.5 engine on centos stream 9 and add a ovirt node(ovirt node 4.5 iso) to this engine. i am going to run my vm on this node. i follow the instruction to create the data center, the cluster, the storage domain, upload the image. everything is fine. and after i create a vm with ubuntu image attach, i found that i can't visit the console. when i using the noVNC, it says "Something went wrong, connection is closed", when i visit vnc with virt-viewver, is says "Failed to complete handshake Error in the pull function". i try to change the console type to Bochs one and it appear the same. i change to QXL mode and the vm can't start any more. i check the log, it says "unsupported configuration: domain configuration does not support video model 'qxl'". so now i can't visit my vm by anyway. i deploy the engine follow the official instruction and keep mostly option default but why still have this issue. why the noVNC says "Something went wrong" instead of telling me what is actually wrong

2 1

Changing disk QoS causes segfault with IO-Threads enabled (oVirt 4.3.0.4-1.el7)
by jloh＠squiz.net 23 Apr '24

23 Apr '24

We recently upgraded to 4.3.0 and have found that when changing disk QoS settings on VMs whilst IO-Threads is enabled causes them to segfault and the VM to reboot. We've been able to replicate this across several VMs. VMs with IO-Threads disabled/turned off do not segfault when changing the QoS. Mar 1 11:49:06 srvXX kernel: IO iothread1[30468]: segfault at fffffffffffffff8 ip 0000557649f2bd24 sp 00007f80de832f60 error 5 in qemu-kvm[5576498dd000+a03000] Mar 1 11:49:06 srvXX abrt-hook-ccpp: invalid number 'iothread1' Mar 1 11:49:11 srvXX libvirtd: 2019-03-01 00:49:11.116+0000: 13365: error : qemuMonitorIORead:609 : Unable to read from monitor: Connection reset by peer Happy to supply some more logs to someone if they'll help but just wondering whether anyone else has experienced this or knows of a current fix other than turning io-threads off. Cheers.

4 3

Deploy oVirt Engine fail behind proxy
by Matteo Bonardi 21 Mar '24

21 Mar '24

Hi, I am trying to deploy the ovirt engine following self-hosted engine installation procedure on documentation. Deployment servers are behind a proxy and I have set it in environment and in yum.conf before run deploy. Deploy fails because ovirt engine vm cannot resolve AppStream repository url: [ INFO ] TASK [ovirt.engine-setup : Install oVirt Engine package] [ ERROR ] fatal: [localhost -> ovirt-manager.mydomain]: FAILED! => {"changed": false, "msg": "Failed to download metadata for repo 'AppStream': Cannot prepare internal mirrorlist: Curl error (6): Couldn't resolve host name for http://mirrorlist.centos.org/?release=8&arch=x86_64&repo=AppStream&infra=st… [Could not resolve host: mirrorlist.centos.org]", "rc": 1, "results": []} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up [ INFO ] Cleaning temporary resources [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fetch logs from the engine VM] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set destination directory path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Create destination directory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set local_vm_disk_path] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Give the vm time to flush dirty buffers] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Copy engine logs] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove local vm dir] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove temporary entry in /etc/hosts for the local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Clean local storage pools] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Destroy local storage-pool {{ he_local_vm_dir | basename }}] [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine local storage-pool {{ he_local_vm_dir | basename }}] [ INFO ] TASK [ovirt.hosted_engine_setup : Destroy local storage-pool {{ local_vm_disk_path.split('/')[5] }}] [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine local storage-pool {{ local_vm_disk_path.split('/')[5] }}] [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20201109165237.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20201109164244-b3e8sd.log How I can set proxy for the engine vm? Ovirt version: [root@myhost ~]# rpm -qa | grep ovirt-engine-appliance ovirt-engine-appliance-4.4-20200916125954.1.el8.x86_64 [root@myhost ~]# rpm -qa | grep ovirt-hosted-engine-setup ovirt-hosted-engine-setup-2.4.6-1.el8.noarch OS version: [root@myhost ~]# cat /etc/centos-release CentOS Linux release 8.2.2004 (Core) [root@myhost ~]# uname -a Linux myhost.mydomain 4.18.0-193.28.1.el8_2.x86_64 #1 SMP Thu Oct 22 00:20:22 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux Thanks for the help. Regards, Matteo

7 20

The oVirt Counter
by Sandro Bonazzola 21 Feb '24

21 Feb '24

Hi, for those who remember the Linux Counter project, if you'd like other to know you're using oVirt and know some details about your deployment, here's a way to count you in: https://ovirt.org/community/ovirt-counter.html Enjoy! -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D PERFORMANCE & SCALE Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 1

Cannot restart ovirt after massive failure.
by Gilboa Davara 18 Jan '24

18 Jan '24

Hello all, During the night, one of my (smaller) setups, a single node self hosted engine (localhost NFS) crashed due to what-looks-like a massive disk failure (Software RAID6, with 10 drives + spare). After a reboot, I let the RAID resync with a fresh drive) and went on to start oVirt. However, no such luck. Two issues: 1. ovirt-ha-broker fails due to broken hosted engine state (log attached). 2. ovirt-ha-agent fails due to network test (tcp) even though both remote-host and DNS servers are active. (log attached). Two questions: 1. Can I somehow force the agent to disable the network liveliness test? 2. Can I somehow force the broker to rebuild / fix the hosted engine state? - Gilboa

4 17

Please, Please Help - New oVirt Install/Deployment Failing - "Host is not up..."
by Matthew J Black 18 Jan '24

18 Jan '24

Hi Everyone, Could someone please help me - I've been trying to do an install of oVirt for *weeks* (including false starts and self-inflicted wounds/errors) and it is still not working. My setup: - oVirt v4.5.3 - A brand new fresh vanilla install of RockyLinux 8.6 - all working AOK - 2*NICs in a bond (802.3ad) with a couple of sub-Interfaces/VLANs - all working AOK - All relevant IPv4 Address in DNS with Reverse Lookups - all working AOK - All relevant IPv4 Address in "/etc/hosts" file - all working AOK - IPv6 (using "method=auto" in the interface config file) enabled on the relevant sub-Interface/VLAN - I'm not using IPv6 on the network, only IPv4, but I'm trying to cover all the bases. - All relevant Ports (as per the oVirt documentation) set up on the firewall - ie firewall-cmd --add-service={{ libvirt-tls | ovirt-imageio | ovirt-vmconsole | vdsm }} - All the relevant Repositories installed (ie RockyLinux BaseOS, AppStream, & PowerTools, and the EPEL, plus the ones from the oVirt documentation) I have followed the oVirt documentation (including the special RHEL-instructions and RockyLinux-instructions) to the letter - no deviations, no special settings, exactly as they are written. All the dnf installs, etc, went off without a hitch, including the "dnf install centos-release-ovirt45", "dnf install ovirt-engine-appliance", and "dnf install ovirt-hosted-engine-setup" - no errors anywhere. Here is the results of a "dnf repolist": - appstream Rocky Linux 8 - AppStream - baseos Rocky Linux 8 - BaseOS - centos-ceph-pacific CentOS-8-stream - Ceph Pacific - centos-gluster10 CentOS-8-stream - Gluster 10 - centos-nfv-openvswitch CentOS-8 - NFV OpenvSwitch - centos-opstools CentOS-OpsTools - collectd - centos-ovirt45 CentOS Stream 8 - oVirt 4.5 - cs8-extras CentOS Stream 8 - Extras - cs8-extras-common CentOS Stream 8 - Extras common packages - epel Extra Packages for Enterprise Linux 8 - x86_64 - epel-modular Extra Packages for Enterprise Linux Modular 8 - x86_64 - ovirt-45-centos-stream-openstack-yoga CentOS Stream 8 - oVirt 4.5 - OpenStack Yoga Repository - ovirt-45-upstream oVirt upstream for CentOS Stream 8 - oVirt 4.5 - powertools Rocky Linux 8 - PowerTools So I kicked-off the oVirt deployment with: "hosted-engine --deploy --4 --ansible-extra-vars=he_offline_deployment=true". I used "--ansible-extra-vars=he_offline_deployment=true" because without that flag I was getting "DNF timout" issues (see my previous post `Local (Deployment) VM Can't Reach "centos-ceph-pacific" Repo`). I answer the defaults to all of questions the script asked, or entered the deployment-relevant answers where appropriate. In doing this I double-checked every answer before hitting <Enter>. Everything progressed smoothly until the deployment reached the "Wait for the host to be up" task... which then hung for more than 30 minutes before failing. From the ovirt-hosted-engine-setup... log file: - 2022-10-20 17:54:26,285+1100 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:113 fatal: [localhost]: FAILED! => {"changed": false, "msg": "Host is not up, please check logs, perhaps also on the engine machine"} I checked the following log files and found all of the relevant ERROR lines, then checked several 10s of proceeding and succeeding lines trying to determine what was going wrong, but I could not determine anything. - ovirt-hosted-engine-setup... - ovirt-hosted-engine-setup-ansible-bootstrap_local_vm... - ovirt-hosted-engine-setup-ansible-final_clean... - not really relevant, I believe I can include the log files (or the relevant parts of the log files) if people want - but that are very large: several 100 kilobytes each. I also googled "oVirt Host is not up" and found several entries, but after reading them all the most relevant seems to be a thread from these mailing list: `Install of RHV 4.4 failing - "Host is not up, please check logs, perhaps also on the engine machine"` - but this seems to be talking about an upgrade and I didn't gleam anything useful from it - I could, of course, be wrong about that. So my questions are: - Where else should I be looking (ie other log files, etc, and possible where to find them)? - Does anyone have any idea why this isn't working? - Does anyone have a work-around (including a completely manual process to get things working - I don't mind working in the CLI with virsh, etc)? - What am I doing wrong? Please, I'm really stumped with this, and I really do need help. Cheers Dulux-Oz

8 22

Configure OVN for oVirt failing - vdsm.tool.ovn_config.NetworkNotFoundError: hostname
by huw.m＠twinstream.com 13 Jan '24

13 Jan '24

Hello, When installing the self-hosted engine using rocky 9 as a host (using nightly builds), the install gets as far as running the below ansible task from ovirt-engine - name: Configure OVN for oVirt ansible.builtin.command: > vdsm-tool ovn-config {{ ovn_central }} {{ ovn_tunneling_interface }} {{ ovn_host_fqdn }} This command gets executed as vdsm-tool ovn-config 192.168.57.4 hostname.my.project.com and fails with error "stderr" : "Traceback (most recent call last):\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 117, in get_network\n return networks[net_name]\nKeyError: 'virt-1.local.hyp.twinstream.com'\n\nDuring handling of the above exception, another exception occurred:\n\nTraceback (most recent call last):\n File \"/usr/bin/vdsm-tool\", line 195, in main\n return tool_command[cmd][\"command\"](*args)\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 63, in ovn_config\n ip_address = get_ip_addr(get_network(network_caps(), net_name))\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 119, in get_network\n raise NetworkNotFoundError(net_name)\nvdsm.tool.ovn_config.NetworkNotFoundError: hostname.my.project.com" Running `vdsm-tool list-nets` on the host gives an empty list. `ip a` gives 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:6d:16:65 brd ff:ff:ff:ff:ff:ff altname enp0s6 altname ens6 inet 192.168.121.29/24 brd 192.168.121.255 scope global dynamic noprefixroute eth0 valid_lft 2482sec preferred_lft 2482sec inet6 fe80::5054:ff:fe6d:1665/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:6b:f4:7b brd ff:ff:ff:ff:ff:ff altname enp0s7 altname ens7 inet 192.168.56.151/24 brd 192.168.56.255 scope global noprefixroute eth1 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe6b:f47b/64 scope link valid_lft forever preferred_lft forever 4: eth2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bond0 state UP group default qlen 1000 link/ether 52:54:00:8f:40:45 brd ff:ff:ff:ff:ff:ff altname enp0s8 altname ens8 5: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:2f:27:9d brd ff:ff:ff:ff:ff:ff altname enp0s9 altname ens9 6: eth4: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bondstorage state UP group default qlen 1000 link/ether 52:54:00:b8:9b:d7 brd ff:ff:ff:ff:ff:ff altname enp0s10 altname ens10 7: eth5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:c2:9a:bd brd ff:ff:ff:ff:ff:ff altname enp0s11 altname ens11 8: eth6: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bondvm state UP group default qlen 1000 link/ether 52:54:00:ed:f7:cc brd ff:ff:ff:ff:ff:ff altname enp0s12 altname ens12 9: eth7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:de:8a:48 brd ff:ff:ff:ff:ff:ff altname enp0s13 altname ens13 10: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:8f:40:45 brd ff:ff:ff:ff:ff:ff inet 192.168.57.4/24 brd 192.168.57.255 scope global noprefixroute bond0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe8f:4045/64 scope link valid_lft forever preferred_lft forever 11: bondvm: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:ed:f7:cc brd ff:ff:ff:ff:ff:ff inet6 fe80::5054:ff:feed:f7cc/64 scope link valid_lft forever preferred_lft forever 12: bondstorage: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:b8:9b:d7 brd ff:ff:ff:ff:ff:ff inet 192.168.59.4/24 brd 192.168.59.255 scope global noprefixroute bondstorage valid_lft forever preferred_lft forever inet6 fe80::5054:ff:feb8:9bd7/64 scope link valid_lft forever preferred_lft forever 13: bondvm.20@bondvm: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:ed:f7:cc brd ff:ff:ff:ff:ff:ff inet6 fe80::5054:ff:feed:f7cc/64 scope link valid_lft forever preferred_lft forever 15: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:b2:5f:e2 brd ff:ff:ff:ff:ff:ff inet 192.168.222.1/24 brd 192.168.222.255 scope global virbr0 valid_lft forever preferred_lft forever 16: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master virbr0 state UNKNOWN group default qlen 1000 link/ether fe:16:3e:34:3d:ea brd ff:ff:ff:ff:ff:ff inet6 fe80::fc16:3eff:fe34:3dea/64 scope link valid_lft forever preferred_lft forever 47: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 6e:27:5f:fa:e3:3a brd ff:ff:ff:ff:ff:ff 48: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 12:7c:d9:2e:cf:26 brd ff:ff:ff:ff:ff:ff 49: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether a2:35:6e:5e:4c:60 brd ff:ff:ff:ff:ff:ff bond0 was selected as the ovirtmgmt bridge NIC. It currently only has one member interface eth2 using balance-xor. In the ovirt management console I can the see host in a down state and given the rest of the playbook ran which requires ssh connectivity between hosted-engine and host, I believe the network is generally setup correctly. No other immediate errors I can. As vdsm-tool ovn-config expects a network to exist with value of the hostname, what is meant to be creating this on the host? Thanks, Huw

2 3

how to renew expired ovirt node vdsm cert manually ?
by dhanaraj.ramesh＠yahoo.com 11 Jan '24

11 Jan '24

below are the steps to renew the expired vdsm cert of ovirt node # To check CERT expired # openssl x509 -in /etc/pki/vdsm/certs/vdsmcert.pem -noout -dates 1. Backup vdsm folder # cd /etc/pki # mv vdsm vdsm.orig # mkdir vdsm ; chown vdsm:kvm vdsm # cd vdsm # mkdir libvirt-vnc certs keys libvirt-spice libvirt-migrate # chown vdsm:kvm libvirt-vnc certs keys libvirt-spice libvirt-migrate 2. Regenerate cert & keys # vdsm-tool configure --module certificates 3. Copy the cert to destination location chmod 440 /etc/pki/vdsm/keys/vdsmkey.pem chown root /etc/pki/vdsmcerts/*pem chmod 644 /etc/pki/vdsmcerts/*pem cp /etc/pki/vdsm/certs/cacert.pem /etc/pki/vdsm/libvirt-spice/ca-cert.pem cp /etc/pki/vdsm/keys/vdsmkey.pem /etc/pki/vdsm/libvirt-spice/server-key.pem cp /etc/pki/vdsm/certs/vdsmcert.pem /etc/pki/vdsm/libvirt-spice/server-cert.pem cp /etc/pki/vdsm/certs/cacert.pem /etc/pki/vdsm/libvirt-vnc/ca-cert.pem cp /etc/pki/vdsm/keys/vdsmkey.pem /etc/pki/vdsm/libvirt-vnc/server-key.pem cp /etc/pki/vdsm/certs/vdsmcert.pem /etc/pki/vdsm/libvirt-vnc/server-cert.pem cp -p /etc/pki/vdsm/certs/cacert.pem /etc/pki/vdsm/libvirt-migrate/ca-cert.pem cp -p /etc/pki/vdsm/keys/vdsmkey.pem /etc/pki/vdsm/libvirt-migrate/server-key.pem cp -p /etc/pki/vdsm/certs/vdsmcert.pem /etc/pki/vdsm/libvirt-migrate/server-cert.pem chown root:qemu /etc/pki/vdsm/libvirt-migrate/server-key.pem cp -p /etc/pki/vdsm.orig/keys/libvirt_password /etc/pki/vdsm/keys/ mv /etc/pki/libvirt/clientcert.pem /etc/pki/libvirt/clientcert.pem.orig mv /etc/pki/libvirt/private/clientkey.pem /etc/pki/libvirt/private/clientkey.pem.orig mv /etc/pki/CA/cacert.pem /etc/pki/CA/cacert.pem.orig cp -p /etc/pki/vdsm/certs/vdsmcert.pem /etc/pki/libvirt/clientcert.pem cp -p /etc/pki/vdsm/keys/vdsmkey.pem /etc/pki/libvirt/private/clientkey.pem cp -p /etc/pki/vdsm/certs/cacert.pem /etc/pki/CA/cacert.pem 3. cross check the backup folder /etc/pki/vdsm.orig vs /etc/pki/vdsm # refer to /etc/pki/vdsm.orig/*/ and set the correct owner & group permission in /etc/pki/vdsm/*/ 4. restart services # Make sure both services are up systemctl restart vdsmd libvirtd

5 4

Unable to install oVirt on RHEL7.5
by SS00514758＠techmahindra.com 05 Jan '24

05 Jan '24

Hi All, I am unable to install oVirt on RHEL7.5, to install it I am taking reference of below link, https://www.ovirt.org/documentation/install-guide/chap-Installing_oVirt.html But though it is not working for me, couple of dependencies is not getting installed, and because of this I am not able to run the ovirt-engine, below are the depencies packages that unable to install, Error: Package: collectd-write_http-5.8.0-6.1.el7.x86_64 (@ovirt-4.2-centos-opstools) Requires: collectd(x86-64) = 5.8.0-6.1.el7 Removing: collectd-5.8.0-6.1.el7.x86_64 (@ovirt-4.2-centos-opstools) collectd(x86-64) = 5.8.0-6.1.el7 Updated By: collectd-5.8.1-1.el7.x86_64 (epel) collectd(x86-64) = 5.8.1-1.el7 Available: collectd-5.7.2-1.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.7.2-1.el7 Available: collectd-5.7.2-3.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.7.2-3.el7 Available: collectd-5.8.0-2.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.8.0-2.el7 Available: collectd-5.8.0-3.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.8.0-3.el7 Available: collectd-5.8.0-5.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.8.0-5.el7 Help me to install this. Looking forward to resolve this issue. Regards Sumit Sahay

6 8