January 2013 - Devel - Ovirt List Archives

by Michael Pasternak

Hi Lawrence, On 01/14/2013 08:31 PM, Lawrence_Sepulveda(a)nmcourt.fed.us wrote: > > Hello Michael. I wanted to extend my thanks for your great work on the oVirt Java-SDK. We are running a RHEV 3.0 stack and I have been reviewing the oVirt > Java-SDK to integrate w/Nagios for monitoring purposes. That said, I'd like to request some minor changes to the Java API that would permit easier access for subclassing. > If there is another more appropriate channel to make these suggestions, please let me know so I may follow through. > > In the org.ovirt.engine.sdk.Api class: > - Add protected createConnectionsPoolBuilder(), createHttpProxyBuilder() and createHttpProxyBroker() methods that are called from the Api constructor(s) ConnectionsPoolBuilder, HttpProxyBuilder using 'builder' design pattern, adding methods accepting builder's parameters and invoking builder after analysing these params, will delegitimize this pattern. > > In the org.ovirt.engine.sdk.web.ConnectionsPoolBuilder class: > - Change private to protected for createDefaultHttpClient(), createPoolingClientConnectionManager() and createSchemaRegistry() methods > - Change private to protected for get() accessor methods The thing is that sdk creating abstraction over transport layer so all mentioned ConnectionsPoolBuilder methods are considered sdk internals, may i ask why do you need this (use-case)? > > Thank you again for the great work on this API. I am finding this API to be exactly what I was needing to monitor our RHEV 3.0 stack. Thank you very much for your kind words, i really appreciate that. > If I should redirect these requests to another communication channel, please let me know. CC'ing engine-devel ML. > > Thank you, > > -- > Lawrence Sepulveda > Systems Engineer > U.S. District Court > District of New Mexico > 333 Lomas Blvd., NW > Albuquerque, NM 87102 > Phone: (505) 348-2085 > Fax: (505) 348-2028 > lsepulveda(a)nmcourt.fed.us > -- -- Michael Pasternak RedHat, ENG-Virtualization R&D

11 years, 10 months

1
0
0 / 0

[Engine-devel] build ovrit-engine from source code failed

by Chen, Wei D

--_000_C5A0092C63E939488005F15F736A811210C2B8SHSMSX101ccrcorpi_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi, We just wanna build ovirt-engine from source code, we follow the instructio= n from the ovirt wiki website http://wiki.ovirt.org/wiki/Building_Ovirt_Eng= ine, but failed at last. All the steps run without errors, however, after I open webadmin, there are= no responses when I click any button. Env: 1. OS: FC17 2. Source code: ovirt 3.2 on Master branch at git://gerrit.ovirt.org/ovirt-= engine Would you also give us some suggestion on how to build ovirt-engine from so= urce code? Best Regards, Dave Chen --_000_C5A0092C63E939488005F15F736A811210C2B8SHSMSX101ccrcorpi_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 14 (filtered medium)"> <style></style> </head> <body lang=3D"ZH-CN" link=3D"blue" vlink=3D"purple" style=3D"text-justify-t= rim:punctuation"> <div class=3D"WordSection1"> Hi,<o:p></o:p> <o:p> </o:p> We just wanna build ovirt-engin= e from source code, we follow the instruction from the ovirt wiki website <a href=3D"http://wiki.ovirt.org/wiki/Building_Ovirt_Engine">http://wiki.ov= irt.org/wiki/Building_Ovirt_Engine</a>, but failed at last.<o:p></o:p></spa= n> All the steps run without error= s, however, after I open webadmin, there are no responses when I click any = button.<o:p></o:p> <o:p> </o:p> Env:<o:p></o:p> 1. OS: FC17<o:p></o:p></= p> 2. Source code: ovirt 3.2 on Ma= ster branch at git://gerrit.ovirt.org/ovirt-engine <o:p></o:p> <o:p> </o:p> Would you also give us some sug= gestion on how to build ovirt-engine from source code? <o:p></o:p> <o:p> </o:p> Best Regards,<o:p></o:p>= Dave Chen<o:p></o:p> <o:p> </o:p> </div> </body> </html> --_000_C5A0092C63E939488005F15F736A811210C2B8SHSMSX101ccrcorpi_--

11 years, 10 months

2
1
0 / 0

[Engine-devel] ovirt-cli 3.2.0.7 released

by Michael Pasternak

For more details see [1]. [1] http://wiki.ovirt.org/wiki/CLI#Change_Log -- Michael Pasternak RedHat, ENG-Virtualization R&D

11 years, 10 months

1
2
0 / 0

[Engine-devel] ovirt-sdk 3.2.0.5 released

by Michael Pasternak

For more details see [1]. [1] http://wiki.ovirt.org/wiki/SDK#Change_Log -- Michael Pasternak RedHat, ENG-Virtualization R&D

11 years, 10 months

2
3
0 / 0

[Engine-devel] Java code formatting

by Doron Fediuck

Hi, Recently I saw many patches with multiple code re-formatting. When looking into it, we saw that many people didn't use the project policy, and now we have many files with bad formatting. So I just posted a big ugly fix for this[1], and hopefully if accepted people should start using the right conventions and reduce the amount of non-relevant changes we see in the patches. I'm aware of the fact that this may create some issues when porting patches, but better sooner than later. Doron. [1] http://gerrit.ovirt.org/#/c/10541/1

11 years, 10 months

6
15
0 / 0

[Engine-devel] Live storage migration status in oVirt 3.2

by Shu Ming

Hi, I am reviewing the live storage migration with my oVirt environment updated from the public nightly repository two weeks ago. I found that the "move" button was still gray as before when the VM was up. Only after I deactivated the disk, did the button become into non-gray state. I am wondering if the live storage migration will be supported in oVirt 3.2 release or not. BTW: These patches below should enable the live storage migration already, but I can not see it enabled in my engine. http://gerrit.ovirt.org/5252 Change I91e641cb: pool: live storage migration implementation http://gerrit.ovirt.org/8105 Change subject: core: Live Storage Migration commands http://gerrit.ovirt.org/8103 Change subject: core: VDS Commands for Live Storage Migration http://gerrit.ovirt.org/8102 Change subject: core: Adding VDSM API for Live Storage Migration http://gerrit.ovirt.org/8470 Change subject: webadmin: Adding Live Storage Migration support http://gerrit.ovirt.org/8857 core: disable LiveStorageMigration on 3.1 -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shuming(a)cn.ibm.com or shuming(a)linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC

11 years, 10 months

3
3
0 / 0

[Engine-devel] ovirt-engine unit tests are broken

by Eyal Edri

fyi, since build # unit tests are broken. last commits:

11 years, 10 months

1
1
0 / 0

[Engine-devel] Question about closing UI plugin dialog

by Morrissey, Christopher

Hi All, I've been working on a plugin for the UI that launches a dialog using the showDialog() API. Our UI is actually contained in a frame inside the dialog and is loaded from a separate server. The only information needed for our UI comes in either through the URL as parameters or from the oVirt REST API. The issue is that once the clicks the OK or Cancel buttons in our UI we need to message to the oVirt UI to close the dialog. It looks like using the window.postMessage() API would be great for this, but it doesn't work across windows in IE. Would it be possible to change the code that launches the window to open a window that contains a bit of javascript that sets up a listener for closing the dialog and then launches the URL in an iFrame in the window? Of course, if it were in a native GWT dialog this wouldn't be a problem. ;) -Chris Chris Morrissey Software Engineer NetApp Inc. 919.476.4428

11 years, 10 months

2
4
0 / 0

[Engine-devel] ATTN: Project Maintainers: Code Freeze/Branch/Beta Build deadlines

by Mike Burns

(Sorry for cross posting, trying to ensure I hit all the relevant maintainers) If you are the primary maintainer of a sub-project in oVirt, this message is for you. At the Weekly oVirt Meeting, the final devel freeze and beta dates were decided. Freeze: 2013-01-14 Beta Post: 2013-01-15 Action items: * You project should create a new branch in gerrit for the release * You should create a formal build of your project for the beta post * Get the formal build of your project into the hands of someone who can post it [1][2] These should all be done by EOD on 2013-01-14 (with the exception of ovirt-node-iso) [3] Packages that this impacts: * mom * otopi * ovirt-engine * ovirt-engine-cli * ovirt-engine-sdk * ovirt-guest-agent * ovirt-host-deploy * ovirt-image-uploader * ovirt-iso-uploader * ovirt-log-collector * ovirt-node * ovirt-node-iso * vdsm Thanks Mike Burns [1] This is only necessary if the package is *not* already in fedora repos (must be in actual fedora repos, not just updates-testing or koji) [2] Communicate with mburns, mgoldboi, oschreib to deliver the packages [3] ovirt-node-iso requires some of the other packages to be available prior to creating the image. This image will be created either on 2013-01-14 or 2013-01-15 and posted along with the rest of the Beta.

11 years, 10 months

1
0
0 / 0

[Engine-devel] failing junit tests

by Laszlo Hornyak

Hi, There are some failing junit tests in engine this morning. It is my bad, I am working on it. Sorry for the inconvinience. Laszlo

11 years, 10 months

1
0
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Devel January 2013