[Engine-devel] cannot execute command in the class of InitVdsOnUpCommand
by Chen, Wei D
Hi,
We suppose when one VDS is added into cluster, executeCommand method in InitVdsOnUpCommand.java will be invoked, so, some logic will be checked there. But per our experiment, this is depended on what we actually did.
Here are some cases:
1. when reboot VDS, the logic in " executeCommand" will be invoked.
2. when re-deploy engine, the logic in " executeCommand" will be invoked.
3. when we add a new VDS (vdsm is running) into cluster, the logic in " executeCommand" will not be invoked.
What we expect is the logic will also be invoked in the third case, but why it's not invoked? What's behind all of these?
Best Regards,
Dave Chen
11 years, 5 months
[Engine-devel] ovirt fails to install on f19 from fedora repos
by Mike Burns
A couple problems came up today on IRC.
* Current version of oVirt in Fedora is 3.1.
* installing oVirt on F19 beta (from fedora repos, not ovirt.org) fails
because classpathx-mail was removed from fedora and is a dependency for
ovirt-engine-notification-service
AFAICT, the notification-service was obsoleted in 3.2 at some point.
Can we either get ovirt-engine rpms updated in F19 or removed completely?
Mike
11 years, 5 months
[Engine-devel] Proposal VDSM <=> Engine Data Statistics Retrieval Optimization
by Vinzenz Feenstra
This is a multi-part message in MIME format.
--------------020305070807050907000005
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Please find the prettier version on the wiki:
http://www.ovirt.org/Proposal_VDSM_-_Engine_Data_Statistics_Retrieval
Proposal VDSM - Engine Data Statistics Retrieval
VDSM <=> Engine data retrieval optimization
Motivation:
Currently the RHEVM engine is polling the a lot of data from VDSM every
15 seconds. This should be optimized and the amount of data requested
should be more specific.
For each VM the data currently contains much more information than
actually needed which blows up the size of the XML content quite big. We
could optimize this by splitting the reply on the getVmStats based on
the request of the engine into sections. For this reason Omer Frenkel
and me have split up the data into parts based on their usage.
This data can and usually does change during the lifetime of the VM.
Rarely Changed:
This data is change not very frequent and it should be enough to update
this only once in a while. Most commonly this data changes after changes
made in the UI or after a migration of the VM to another Host.
*Status* = Running
*acpiEnable* = true
*vmType* = kvm
*guestName* = W864GUESTAGENTT
*displayType* = qxl
*guestOs* = Win 8
*kvmEnable* = true #/*this should be constant and never changed*/
*pauseCode* = NOERR
*monitorResponse* = 0
*session* = Locked # unused
*netIfaces* = [{'name': 'Realtek RTL8139C+ Fast Ethernet NIC', 'inet6': ['fe80::490c:92bb:bbcc:9f87'], 'inet': ['10.34.60.148'], 'hw': '00:1a:4a:22:3c:db'}]
*appsList* = ['RHEV-Tools 3.2.4', 'RHEV-Agent64 3.2.3', 'RHEV-Serial64 3.2.3', 'RHEV-Network64 3.2.2', 'RHEV-Network64 3.2.3', 'RHEV-Block64 3.2.3', 'RHEV-Balloon64 3.2.3', 'RHEV-Balloon64 3.2.2', 'RHEV-Agent64 3.2.2', 'RHEV-USB 3.2.3', 'RHEV-Block64 3.2.2', 'RHEV-Serial64 3.2.2']
*pid* = 11314
*guestIPs* = 10.34.60.148 # duplicated info
*displayIp* = 0
*displayPort* = 5902
*displaySecurePort* = 5903
*username* = user@W864GUESTAGENTT
*clientIp* =
*lastLogin* = 1361976900.67
Often Changed:
This data is changed quite often however it is not necessary to update
this data every 15 seconds. As this is cumulative data and reflects the
current status, and it does not need to be snapshotted every 15 seconds
to retrieve statistics. The data can be retrieved in much more generous
time slices. (e.g. Every 5 minutes)
*network* = {'vnet1': {'macAddr': '00:1a:4a:22:3c:db', 'rxDropped': '0', 'txDropped': '0', 'rxErrors': '0', 'txRate': '0.0', 'rxRate': '0.0', 'txErrors': '0', 'state': 'unknown', 'speed': '100', 'name': 'vnet1'}}
*disksUsage* = [{'path': 'c:\\', 'total': '64055406592', 'fs': 'NTFS', 'used': '19223846912'}, {'path': 'd:\\', 'total': '3490912256', 'fs': 'UDF', 'used': '3490912256'}]
*timeOffset* = 14422
*elapsedTime* = 68591
*hash* = 2335461227228498964
*statsAge* = 0.09 # unused
Often Changed but unused
This data does not seem to be used in the engine at all. It is *not*
even used in the data warehouse.
*memoryStats* = {'swap_out': '0', 'majflt': '0', 'mem_free': '1466884', 'swap_in': '0', 'pageflt': '0', 'mem_total': '2096736', 'mem_unused': '1466884'}
*balloonInfo* = {'balloon_max': 2097152, 'balloon_cur': 2097152}
*disks* = {'vda': {'readLatency': '0', 'apparentsize': '64424509440', 'writeLatency': '1754496', 'imageID': '28abb923-7b89-4638-84f8-1700f0b76482', 'flushLatency': '156549', 'readRate': '0.00', 'truesize': '18855059456', 'writeRate': '952.05'}, 'hdc': {'readLatency': '0', 'apparentsize': '0', 'writeLatency': '0', 'flushLatency': '0', 'readRate': '0.00', 'truesize': '0', 'writeRate': '0.00'}}
Very frequent uppdates needed by webadmin portal:
This data is mostly needed for the webadmin portal and might be required
to be updated quite often. An exception here is the statsAge field,
which seems to be unused by the Engine. This data could be requested
every 15 seconds to keep things as they are now.
*cpuSys* = 2.32
*cpuUser* = 1.34
*memUsage* = 30
Proposed Solution for VDSM & Engine:
We will introduce new optional parameters to getVmStats, getAllVmStats
and list to allow a finer grained specification of data which should be
included.
*Parameter:* *statsType*=/*<string>*/ (getVmStats, getAllVmStats only)
*Allowed values:*
* full (default to keep backwards compatibility)
* app-list (Just send the application list)
* rare (include everything from rarely changed to very frequent)
* often (include everything from often changed to very frequent)
* frequent (only send the very frequently changed items)
*Parameter:* *clientId*=*<string>* The client id is specified by the
client and should be unique however constantly used.
*Parameter:* *diff*=*<boolean>* In combination with the clientId VDSM
will send only differences to the previous request from the named
clientId. (if diff=true)
Additional Change:
Besides the introduction of the new parameters for list, getVmStats and
getAllVmStats it might make sense to include a hash for the appList into
the rarely changed section of the response which would allow to identify
changes and avoid having to sent the complete appList every so often and
only if the hash known to the client is outdated.
*Note:* The appList (Application List) reported by the guest agent could
be fully implemented on request only, as long as the guest agent
installed supports this. As there seems to be a request to have the
complete list of installed applications on all guests this data could be
quite extensive and a huge list. On the other hand this data is only
rarely visible and therefore it should not be requested all the time and
only on demand.
Improvement of the Guest Agent:
As part of the proposed solution it is necessary to improve the guest
agent as well. For the full application list there should be implemented
a caching system which will be fully reactive and should not poll the
application list for example all the time. The guest can create a
prepared data file containing all data in the JSON format (as used for
the communication with VDSM via VIO) and just have to read that file
from disk and directly sends it to VDSM. However it is quite possible
that this list is to big and it might have to be chunked into pieces.
(Multiple messages, which would have to be supported by VDSM then as
well) The solution for this is to make VDSM request this data and it
will retrieve the data necessary on request only.
--
Regards,
Vinzenz Feenstra | Senior Software Engineer
RedHat Engineering Virtualization R & D
Phone: +420 532 294 625
IRC: vfeenstr or evilissimo
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
--------------020305070807050907000005
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Please find the prettier version on the wiki:
<a class="moz-txt-link-freetext" href="http://www.ovirt.org/Proposal_VDSM_-_Engine_Data_Statistics_Retrieval">http://www.ovirt.org/Proposal_VDSM_-_Engine_Data_Statistics_Retrieval</a><br>
<br>
<h1 id="firstHeading" class="firstHeading page-header"><span
dir="auto">Proposal VDSM - Engine Data Statistics Retrieval</span></h1>
<h2><span class="mw-headline"
id="VDSM_.3C.3D.3E_Engine_data_retrieval_optimization">VDSM
<=> Engine data retrieval optimization </span></h2>
<h3> <span class="mw-headline" id="Motivation:"> Motivation: </span></h3>
<p>Currently the RHEVM engine is polling the a lot of data from VDSM
every 15 seconds. This should be optimized and the amount of data
requested should be more specific.
</p>
<p>For each VM the data currently contains much more information
than actually needed which blows up the size of the XML content
quite big. We could optimize this by splitting the reply on the
getVmStats based on the request of the engine into sections.
For this reason Omer Frenkel and me have split up the data into
parts based on their usage.
</p>
<p>This data can and usually does change during the lifetime of the
VM.
</p>
<h4> <span class="mw-headline" id="Rarely_Changed:"> Rarely
Changed: </span></h4>
<p>This data is change not very frequent and it should be enough to
update this only once in a while.
Most commonly this data changes after changes made in the UI or
after a migration of the VM to another Host.
</p>
<pre> <b>Status</b> = Running
<b>acpiEnable</b> = true
<b>vmType</b> = kvm
<b>guestName</b> = W864GUESTAGENTT
<b>displayType</b> = qxl
<b>guestOs</b> = Win 8
<b>kvmEnable</b> = true # <i><b>this should be constant and never changed</b></i>
<b>pauseCode</b> = NOERR
<b>monitorResponse</b> = 0
<b>session</b> = Locked # unused
<b>netIfaces</b> = [{'name': 'Realtek RTL8139C+ Fast Ethernet NIC', 'inet6': ['fe80::490c:92bb:bbcc:9f87'], 'inet': ['10.34.60.148'], 'hw': '00:1a:4a:22:3c:db'}]
<b>appsList</b> = ['RHEV-Tools 3.2.4', 'RHEV-Agent64 3.2.3', 'RHEV-Serial64 3.2.3', 'RHEV-Network64 3.2.2', 'RHEV-Network64 3.2.3', 'RHEV-Block64 3.2.3', 'RHEV-Balloon64 3.2.3', 'RHEV-Balloon64 3.2.2', 'RHEV-Agent64 3.2.2', 'RHEV-USB 3.2.3', 'RHEV-Block64 3.2.2', 'RHEV-Serial64 3.2.2']
<b>pid</b> = 11314
<b>guestIPs</b> = 10.34.60.148 # duplicated info
<b>displayIp</b> = 0
<b>displayPort</b> = 5902
<b>displaySecurePort</b> = 5903
<b>username</b> = user@W864GUESTAGENTT
<b>clientIp</b> =
<b>lastLogin</b> = 1361976900.67
</pre>
<h4> <span class="mw-headline" id="Often_Changed:"> Often Changed:
</span></h4>
<p>This data is changed quite often however it is not necessary to
update this data every 15 seconds. As this is cumulative data and
reflects the current status, and it does not need to be
snapshotted every 15 seconds to retrieve statistics. The data can
be retrieved in much more generous time slices. (e.g. Every 5
minutes)
</p>
<pre> <b>network</b> = {'vnet1': {'macAddr': '00:1a:4a:22:3c:db', 'rxDropped': '0', 'txDropped': '0', 'rxErrors': '0', 'txRate': '0.0', 'rxRate': '0.0', 'txErrors': '0', 'state': 'unknown', 'speed': '100', 'name': 'vnet1'}}
<b>disksUsage</b> = [{'path': 'c:\\', 'total': '64055406592', 'fs': 'NTFS', 'used': '19223846912'}, {'path': 'd:\\', 'total': '3490912256', 'fs': 'UDF', 'used': '3490912256'}]
<b>timeOffset</b> = 14422
<b>elapsedTime</b> = 68591
<b>hash</b> = 2335461227228498964
<b>statsAge</b> = 0.09 # unused
</pre>
<h4> <span class="mw-headline" id="Often_Changed_but_unused"> Often
Changed but unused </span></h4>
<p>This data does not seem to be used in the engine at all. It is <b>not</b>
even used in the data warehouse.
</p>
<pre> <b>memoryStats</b> = {'swap_out': '0', 'majflt': '0', 'mem_free': '1466884', 'swap_in': '0', 'pageflt': '0', 'mem_total': '2096736', 'mem_unused': '1466884'}
<b>balloonInfo</b> = {'balloon_max': 2097152, 'balloon_cur': 2097152}
<b>disks</b> = {'vda': {'readLatency': '0', 'apparentsize': '64424509440', 'writeLatency': '1754496', 'imageID': '28abb923-7b89-4638-84f8-1700f0b76482', 'flushLatency': '156549', 'readRate': '0.00', 'truesize': '18855059456', 'writeRate': '952.05'}, 'hdc': {'readLatency': '0', 'apparentsize': '0', 'writeLatency': '0', 'flushLatency': '0', 'readRate': '0.00', 'truesize': '0', 'writeRate': '0.00'}}
</pre>
<h4> <span class="mw-headline"
id="Very_frequent_uppdates_needed_by_webadmin_portal:"> Very
frequent uppdates needed by webadmin portal: </span></h4>
<p>This data is mostly needed for the webadmin portal and might be
required to be updated quite often. An exception here is the
statsAge field, which seems to be unused by the Engine.
This data could be requested every 15 seconds to keep things as
they are now.
</p>
<pre> <b>cpuSys</b> = 2.32
<b>cpuUser</b> = 1.34
<b>memUsage</b> = 30
</pre>
<h2> <span class="mw-headline"
id="Proposed_Solution_for_VDSM_.26_Engine:"> Proposed Solution
for VDSM & Engine: </span></h2>
<p>We will introduce new optional parameters to getVmStats,
getAllVmStats and list to allow a finer grained specification of
data which should be included.
</p>
<p><b>Parameter:</b> <b>statsType</b>=<i><b><string></b></i>
(getVmStats, getAllVmStats only)
<b>Allowed values:</b>
</p>
<ul>
<li> full (default to keep backwards compatibility)
</li>
<li> app-list (Just send the application list)
</li>
<li> rare (include everything from rarely changed to very
frequent)
</li>
<li> often (include everything from often changed to very
frequent)
</li>
<li> frequent (only send the very frequently changed items)
</li>
</ul>
<p><br>
<b>Parameter:</b> <b>clientId</b>=<b><string></b>
The client id is specified by the client and should be unique
however constantly used.
</p>
<p><b>Parameter:</b> <b>diff</b>=<b><boolean></b>
In combination with the clientId VDSM will send only differences
to the previous request from the named clientId. (if diff=true)
</p>
<p><br>
</p>
<h3> <span class="mw-headline" id="Additional_Change:"> Additional
Change: </span></h3>
<p>Besides the introduction of the new parameters for list,
getVmStats and getAllVmStats it might make sense to include a hash
for the appList into the rarely changed section of the response
which would allow to identify changes and avoid having to sent the
complete appList every so often and only if the hash known to the
client is outdated.
</p>
<p><b>Note:</b> The appList (Application List) reported by the guest
agent could be fully implemented on request only, as long as the
guest agent installed supports this. As there seems to be a
request to have the complete list of installed applications on all
guests this data could be quite extensive and a huge list. On the
other hand this data is only rarely visible and therefore it
should not be requested all the time and only on demand.
</p>
<h3> <span class="mw-headline" id="Improvement_of_the_Guest_Agent:">
Improvement of the Guest Agent: </span></h3>
<p>As part of the proposed solution it is necessary to improve the
guest agent as well. For the full application list there should be
implemented a caching system which will be fully reactive and
should not poll the application list for example all the time.
The guest can create a prepared data file containing all data in
the JSON format (as used for the communication with VDSM via VIO)
and just have to read that file from disk and directly sends it to
VDSM.
However it is quite possible that this list is to big and it might
have to be chunked into pieces. (Multiple messages, which would
have to be supported by VDSM then as well)
The solution for this is to make VDSM request this data and it
will retrieve the data necessary on request only.
</p>
<pre class="moz-signature" cols="72">--
Regards,
Vinzenz Feenstra | Senior Software Engineer
RedHat Engineering Virtualization R & D
Phone: +420 532 294 625
IRC: vfeenstr or evilissimo
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com</pre>
</body>
</html>
--------------020305070807050907000005--
11 years, 5 months
[Engine-devel] about IntelliJ
by wlbleaboy＠126
ÕâÊÇÒ»·â MIME žñÊœµÄ¶à²¿·ÖÓÊŒþ¡£
------=_NextPart_000_0018_01CE5C9D.19F99150
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
Hi, all:
Is there anyone used Intellij to build and deploy ovirt-engine
http://www.ovirt.org/Building_Ovirt_Engine/IDE#IntelliJ is not explicit,
------=_NextPart_000_0018_01CE5C9D.19F99150
Content-Type: text/html;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" =
xmlns=3D"http://www.w3.org/TR/REC-html40">
<head>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">
<meta name=3DGenerator content=3D"Microsoft Word 12 (filtered medium)">
<style>
<!--
/* Font Definitions */
@font-face
{font-family:\5B8B\4F53;
panose-1:2 1 6 0 3 1 1 1 1 1;}
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:"\@\5B8B\4F53";
panose-1:2 1 6 0 3 1 1 1 1 1;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
text-align:justify;
text-justify:inter-ideograph;
font-size:10.5pt;
font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p.MsoAcetate, li.MsoAcetate, div.MsoAcetate
{mso-style-priority:99;
mso-style-link:"\6279\6CE8\6846\6587\672C Char";
margin:0cm;
margin-bottom:.0001pt;
text-align:justify;
text-justify:inter-ideograph;
font-size:9.0pt;
font-family:"Calibri","sans-serif";}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri","sans-serif";
color:windowtext;}
span.Char
{mso-style-name:"\6279\6CE8\6846\6587\672C Char";
mso-style-priority:99;
mso-style-link:\6279\6CE8\6846\6587\672C;}
.MsoChpDefault
{mso-style-type:export-only;}
/* Page Definitions */
@page Section1
{size:612.0pt 792.0pt;
margin:72.0pt 90.0pt 72.0pt 90.0pt;}
div.Section1
{page:Section1;}
-->
</style>
<!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=3DZH-CN link=3Dblue vlink=3Dpurple =
style=3D'text-justify-trim:punctuation'>
<div class=3DSection1>
<p class=3DMsoNormal><span lang=3DEN-US>Hi, all:<o:p></o:p></span></p>
<p class=3DMsoNormal><span =
lang=3DEN-US> Is
there anyone used Intellij to build and deploy =
ovirt-engine<o:p></o:p></span></p>
<p class=3DMsoNormal><span lang=3DEN-US><a
href=3D"http://www.ovirt.org/Building_Ovirt_Engine/IDE#IntelliJ">http://w=
ww.ovirt.org/Building_Ovirt_Engine/IDE#IntelliJ</a>
is not explicit,<o:p></o:p></span></p>
<p class=3DMsoNormal><span lang=3DEN-US><o:p> </o:p></span></p>
<p class=3DMsoNormal><span lang=3DEN-US><o:p> </o:p></span></p>
<p class=3DMsoNormal><span lang=3DEN-US><o:p> </o:p></span></p>
</div>
</body>
</html>
------=_NextPart_000_0018_01CE5C9D.19F99150--
11 years, 5 months
[Engine-devel] Regarding access to ovirt.org for creating feature pages
by Shubhendu Tripathi
Hi All,
I have joined RedHat this month and work with RHSC team.
I need to create a feature page on Ovirt WIKI, and so raised a request
for the same to get an id created.
I have not received any confirmation till now.
Kindly let me know if something is missing or I need to follow some
other process.
ID Created: shtripat
Email Id: shtripat(a)redhat.com
Thanks and Regards,
Shubhendu Tripathi
11 years, 5 months
