February 2014 - Devel - oVirt List Archives

[Engine-devel] GWT Dev Mode unbearably slow in WebAdmin
by Greg Sheremeta 21 Mar '14

21 Mar '14

Has anyone else noticed that GWT Dev Mode is unbearably slow for WebAdmin? On my machine, it's to the point where I might as well rebuild the entire application for every change and not bother with Dev Mode. Pages take 4 or 5 minutes to render. Sometimes after 5 minutes, I just give up, close everything, and rebuild the app. For now, I want to see if others have this issue. If we confirm that it's widespread, we can discuss ways to mitigate. Greg Sheremeta Red Hat, Inc. Sr. Software Engineer, RHEV Cell: 919-807-1086 gshereme(a)redhat.com

5 14

[Engine-devel] Asynchronous tasks for live merge
by Adam Litke 03 Mar '14

03 Mar '14

Hi all, As part of our plan to support live merging of VM disk snapshots it seems we will need a new form of asynchronous task in ovirt-engine. I am aware of AsyncTaskManager but it seems to be limited to managing SPM tasks. For live merge, we are going to need something called VmTasks since the async command can be run only on the host that currently runs the VM. The way I see this working from an engine perspective is: 1. RemoveSnapshotCommand in bll is invoked as usual but since the VM is found to be up, we activate an alternative live merge flow. 2. We submit a LiveMerge VDS Command for each impacted disk. This is an asynchronous command which we need to monitor for completion. 3. A VmJob is inserted into the DB so we'll remember to handle it. 4. The VDS Broker monitors the operation via an extension to the already collected VmStatistics data. Vdsm will report active Block Jobs only. Once the job stops (in error or success) it will cease to be reported by vdsm and engine will know to proceed. 5. When the job has completed, VDS Broker raises an event up to bll. Maybe this could be done via VmJobDAO on the stored VmJob? 6. Bll receives the event and issues a series of VDS commands to complete the operation: a) Verify the new image chain matches our expectations (the snap is no longer present in the chain). b) Delete the snapshot volume c) Remove the VmJob from the DB Could you guys review this proposed flow for sanity? The main conceptual gaps I am left with concern #5 and #6. What is the appropriate way for VDSBroker to communicate with BLL? Is there an event mechanism I can explore or should I use the database? I am leaning toward the database because it is persistent and will ensure #6 gets completed even if engine is restarted somewhere in the middle. For #6, is there an existing polling / event loop in bll that I can plug into? Thanks in advance for taking the time to think about this flow and for providing your insights! -- Adam Litke

3 6

[Engine-devel] Install rhevm-guest-agent on SLES guest
by Vikas Kokare 03 Mar '14

03 Mar '14

We want to install the rhevm-guest-agent package on a virtual machine with Suse Linux as the guest OS. The RHEVM 3.2 documentation provides install instructions for RHEL and Windows guests but not for Suse Linux. This agent is important to monitor virtual resources on guest machines, hence the need. How can this be done?

4 3

[Engine-devel] ReST API docs
by Vikas Kokare 02 Mar '14

02 Mar '14

Only https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Virtu… the ReST API document available, and not corresponding versions for 3.1, 3.2 and 3.3. I see differences in 3.0 ReST data structure and what is returned back from RHEVM 3.2 installation. Please point to the REST API Guide for RHEVM 3.2.

2 1

[Engine-devel] [ANN] oVirt 3.4.0 Release Candidate is now available
by Sandro Bonazzola 28 Feb '14

28 Feb '14

The oVirt team is pleased to announce that the 3.4.0 Release Candidate is now available for testing. Release notes and information on the changes for this update are still being worked on and will be available soon on the wiki[1]. Please ensure to follow install instruction from release notes if you're going to test it. The existing repository ovirt-3.4.0-prerelease has been updated for delivering this release candidate and future refreshes until final release. An oVirt Node iso is already available, unchanged from third beta. You're welcome to join us testing this release candidate in next week test day [2] scheduled for 2014-03-06! [1] http://www.ovirt.org/OVirt_3.4.0_release_notes [2] http://www.ovirt.org/OVirt_3.4_Test_Day -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

[Engine-devel] ReST API documentation
by Vikas Kokare 27 Feb '14

27 Feb '14

Only https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Virtu… the ReST API document available, and not corresponding versions for 3.1, 3.2 and 3.3. Hasn't the API changed since 3.0?

2 1

[Engine-devel] Reviewers for PPC64 patches
by Leonardo Bianconi 26 Feb '14

26 Feb '14

1 1

[Engine-devel] Search collections with queries
by Vikas Kokare 26 Feb '14

26 Feb '14

There is very limited documentation (ReST API)about the search query "criteria" for searching objects. The general format is (criteria) [sortby (elem ent) asc|desc] I was looking for detailed information on what the criteria can or can't support. Please guide to the appropriate source.

2 1

[Engine-devel] oVirt 3.3.4 Release Candidate is now available
by Sandro Bonazzola 25 Feb '14

25 Feb '14

The oVirt team is pleased to announce that the 3.3.4 Release Candidate is now available in ovirt-updates-testing [1]. Feel free to join us testing it[2] and verifying the bugzilla entries actually under verification. Release notes for this update will be updated soon on the wiki [3]. [1] http://resources.ovirt.org/releases/updates-testing [2] http://www.ovirt.org/Testing/Ovirt_3.3.4_testing [3] http://www.ovirt.org/OVirt_3.3.4_release_notes -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

[Engine-devel] ovirt-engine Java SDK
by Vikas Kokare 25 Feb '14

25 Feb '14

Is this the right location to look for the Java SDK of the ovirt-engine? https://oss.sonatype.org/content/repositories/releases/org/ovirt/engine/sdk… Regards Vikas

3 2

[Engine-devel] which data structure is better
by Liao, Chuan (Jason Liao, HPservers-Core-OE-PSC) 25 Feb '14

25 Feb '14

--_000_B63C858E777679458338A30A991BB524015B0A84G1W3780americas_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi All, I am Jason Liao from HP who are in charge of NUMA and Virtual NUMA feature. Now I have some concept about the host NUMA topology data structure on engi= ne core We have VDS, VDSDynamic, VDSStatic, VdsStatistics object on engine core. And we have NUMA topology information: List<NumaNode> numaNodeList NumaNode String ID = # update from GetCapabilitiesVDSCommand List<String> cpuList # update = from GetCapabilitiesVDSCommand Int totalMem # update from GetCapabi= litiesVDSCommand Int freeMem # u= pdate from GetStatsVDSCommand A. Add this data structure into VDSDynamic We should change the GetStatsVDSCommand update the VDSDynamic data. B. Add this data structure into VDS, and build the data structure from= VDSDynamic, VdsStatistics I prefer B. does anybody have some comments? Best Regards, Jason Liao --_000_B63C858E777679458338A30A991BB524015B0A84G1W3780americas_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"ZH-CN" link=3D"#0563C1" vlink=3D"#954F72" style=3D"text-justi= fy-trim:punctuation"> <div class=3D"WordSection1"> Hi All,<o:p></o:p> <o:p> </o:p> I am Jason Liao from HP who are in = charge of NUMA and Virtual NUMA feature.<o:p></o:p> <o:p> </o:p> Now I have some concept about the h= ost NUMA topology data structure on engine core<o:p></o:p> <o:p> </o:p> We have VDS, VDSDynamic, VDSStatic,= VdsStatistics object on engine core.<o:p></o:p> <o:p> </o:p> And we have NUMA topology informati= on:<o:p></o:p> List<NumaNode> numaNodeList<o= :p></o:p>      &nbsp= ;   NumaNode<o:p></o:p>      &nbsp= ;            String ID&nb= sp;            =             &nb= sp;            =            # update from = GetCapabilitiesVDSCommand<o:p></o:p>      &nbsp= ;             L= ist<String> cpuList        &n= bsp;           &nbsp= ;      # update from GetCapabilitiesVDSCommand<o:p= ></o:p> <spa= n lang=3D"EN-US" style=3D"font-family:"HP Simplified","sans-= serif"">Int totalMem        &n= bsp;           &nbsp= ;            &n= bsp;      # update from GetCapabilitiesVDSCommand<= o:p></o:p>      &nbsp= ;             I= nt freeMem          &nbsp= ;            &n= bsp;           &nbsp= ;      # update from GetStatsVDSCommand<o:p></o:p>=      &nbsp= ;             <o:p></o:p> <![if !supportLists]>A.<sp= an style=3D"font:7.0pt "Times New Roman"">   &nbsp= ;  <![endif]>Add this data structure int= o VDSDynamic<o:p></o:p> <span= lang=3D"EN-US" style=3D"font-family:"HP Simplified","sans-s= erif"">We should change the GetStatsVDSCommand update the VDSDynamic d= ata.<o:p></o:p> <![if !supportLists]>B.<sp= an style=3D"font:7.0pt "Times New Roman"">   &nbsp= ;  <![endif]>Add this data structure int= o VDS, and build the data structure from VDSDynamic, VdsStatistics<o:p></o:= p> <o= :p> </o:p> I = prefer B. does anybody have some comments?<o:p></o:p> <o:p> </o:p> Best= Regards, Jason Liao= <o:p></o:p> <o:p> </o:p> </div> </body> </html> --_000_B63C858E777679458338A30A991BB524015B0A84G1W3780americas_--

4 3

[Engine-devel] Storage allocation/usage
by Vikas Kokare 24 Feb '14

24 Feb '14

We are trying to query the rhevm/oVirt engine for the storage allocation/actual usage numbers for 1. Host 2. Virtual Machine (we can have allocation size from virtual disks associated with VM, but not the actual usage) 3. Cluster Is there a ReST API that can fetch this information?

2 1

[Engine-devel] [oVirt jenkins] Weekly report on open tasks for ovirt-engine
by Jenkins ci oVirt Server 23 Feb '14

23 Feb '14

------=_Part_297_1785790837.1393180251301 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: 7bit <html><head></head><body>Files scanned: '**/*.java, **/*.py'. Strings searched: FIXME | TODO | @deprecated Report: http://jenkins.ovirt.org/job/ovirt_engine_scan_open_tasks/17/tasksResult/?</body></html> ------=_Part_297_1785790837.1393180251301--

1 0

[Engine-devel] Storage allocation and usage
by Vikas Kokare 21 Feb '14

21 Feb '14

We are trying to query the rhevm/oVirt engine for the storage allocation/actual usage numbers for 1. Host 2. Virtual Machine (we can have allocation size from virtual disks associated with VM, but not the actual usage) 3. Cluster Is there a ReST API that can fetch this information?

1 0

[Engine-devel] VM Ip Address
by Vikas Kokare 20 Feb '14

20 Feb '14

We have a RHEV 3.2 manager environment setup with hosts having virtual machines. The administrator's have confirmed that they have assigned IP addresses to the VM's, but the address is not showing up both in the Web Admin console, and the ReST API payload for /api/vms/{vm-id}

2 1

[Engine-devel] [ANN] oVirt 3.4.0 beta3 is now available
by Sandro Bonazzola 19 Feb '14

19 Feb '14

The oVirt team is pleased to announce that the 3.4.0 third beta release is now available for testing. Release notes and information on the changes for this update are still being worked on and will be available soon on the wiki[1]. Please ensure to follow install instruction from release notes if you're going to test it. The existing repository ovirt-3.4.0-prerelease has been updated for delivering this beta and future refreshes until release candidate. A new oVirt Node build will be available soon as well. You're welcome to join us testing this beta release before we'll compose RC build for next week test day [2] scheduled for 2014-02-27! [1] http://www.ovirt.org/OVirt_3.4.0_release_notes [2] http://www.ovirt.org/OVirt_3.4_Test_Day -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

[Engine-devel] [oVirt 3.4 Localization Question #10] "hotPlugUnplugCpuWarning"
by Yuko Katabami 18 Feb '14

18 Feb '14

This is a multi-part message in MIME format. --------------010703070809010203010400 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello again, I would like to ask for your help again with the following string. * File:*CommonApplicationMessages *Resource ID:*hotPlugUnplugCpuWarning* String:*Hot set CPUs by changing the number of sockets. The support for hot plug/unplug CPUs to the guest varies. *Question:*The second sentence is a bit unclear for me. Could anyone tell me "the support varies depending on what?" Is it the type or spec of the guest or host that determines the support? So some support hot-set while others don't? Is this a warning message to tell users that hot-set may not be supported? Thanks in advance. Yuko --------------010703070809010203010400 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> Hello again, I would like to ask for your help again with the following string. File: CommonApplicationMessages <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> Resource ID: hotPlugUnplugCpuWarning String: Hot set CPUs by changing the number of sockets. The support for hot plug/unplug CPUs to the guest varies. Question:  The second sentence is a bit unclear for me. Could anyone tell me "the support varies depending on what?" Is it the type or spec of the guest or host that determines the support? So some support hot-set while others don't? Is this a warning message to tell users that hot-set may not be supported? Thanks in advance. Yuko <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> <div class="moz-signature"> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </div> </body> </html> --------------010703070809010203010400--

3 3

[Engine-devel] 401 Authorization Error
by Vikas Kokare 17 Feb '14

17 Feb '14

I am using oVirt Java SDK 3.4.2 to connect to RHEV-M environment. The code being used is org.ovirt.engine.sdk.Api api = new Api("https://HOST:PORT/api","USER","PASSWORD", true); The response from the server to this call is *oVirt API error <html><head><title>JBoss Web/7.2.2.Final-redhat-1 - JBWEB000064: Error report</title><style></style> </head><body><h1>JBWEB000065: HTTP Status 401 - </h1><HR size="1" noshade="noshade">JBWEB000309: type JBWEB000067: Status reportJBWEB000068: message JBWEB000069: description JBWEB000121: This request requires HTTP authentication.<HR size="1" noshade="noshade"><h3>JBoss Web/7.2.2.Final-redhat-1</h3></body></html>* The documentation talks about the 401 error when the request doesn't contain "Authorization" header. Even when i access https://HOST:PORT/api , i am prompted to login, but the credentials used to login to https://HOST:PORT/webadmin/webadmin/WebAdmin.html don't work. So if i login to webadmin console first, then since the "Authorization" header is set, access to /api is now possible in the browser. I need help here specifically for making the Java SDK work with RHeVM server. -Vikas

2 1

[Engine-devel] [oVirt 3.4 Localization Question #5] "LABELED_NETWORK_ATTACHED_TO_WRONG_INTERFACE"
by Yuko Katabami 16 Feb '14

16 Feb '14

This is a multi-part message in MIME format. --------------030602040503050701020606 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello again, I would like to ask you another question. *File:***AppErrors* **Resource ID:* LABELED_NETWORK_ATTACHED_TO_WRONG_INTERFACE* **Strings: *Cannot ${action} ${type}. The following networks are already attached to a different interface: ${AssignedNetworks}. Please remove the networks in *Question:* The last sentence might be missing some words. Could anyone please check it for us? Thanks in advance. Yuko ** --------------030602040503050701020606 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hello again, I would like to ask you another question. File: AppErrors Resource ID: <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> LABELED_NETWORK_ATTACHED_TO_WRONG_INTERFACE Strings: Cannot ${action} ${type}. The following networks are already attached to a different interface: ${AssignedNetworks}. Please remove the networks in Question: The last sentence might be missing some words. Could anyone please check it for us? Thanks in advance. Yuko <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </body> </html> --------------030602040503050701020606--

3 7

[Engine-devel] Sarting 03_05 prefix for upgrade scripts on master
by Eli Mesika 15 Feb '14

15 Feb '14

Hi Please note that from this point database upgrade scripts pushed to master should have the 03_05 prefix If one of those scripts lets say 03_05_xxxx is backported to 3.4 stable branch it should be renamed as 03_04_yyyy. Thanks Eli Mesika

1 0

[Engine-devel] [oVirt 3.4 Localization Question #9] schedulerOptimizationInfo
by Yuko Katabami 14 Feb '14

14 Feb '14

This is a multi-part message in MIME format. --------------070904050903040700090901 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello all, Sorry for increasing email traffic but this is my last question for today. * File: *UIMessages* Resource ID: *schedulerOptimizationInfo *String: *Optimize scheduling for host weighing (ordering):Utilization: include weight modules in scheduling to allow best _selectionSpeed_: skip host weighing in case there are more than {0} pending requests* Question: *I am wondering if a full stop and a line break are missing between "selection" and "Speed". Thank you, Yuko --------------070904050903040700090901 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> <big>Hello all, Sorry for increasing email traffic but this is my last question for today. </big><big> File: </big><big>UIMessages</big><big> Resource ID: </big>schedulerOptimizationInfo <big> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> String: </big><big>Optimize scheduling for host weighing (ordering):Utilization: include weight modules in scheduling to allow best selectionSpeed: skip host weighing in case there are more than {0} pending requests</big><big> Question: </big><big>I am wondering if a full stop and a line break are missing between "selection" and "Speed". Thank you, Yuko </big> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </body> </html> --------------070904050903040700090901--

2 2

[Engine-devel] Using REST API in web UI - review call summary
by Vojtech Szocs 14 Feb '14

14 Feb '14

Hi guys, this is a summary of yesterday's review call, I'll try to highlight important Q/A and things we agreed on. Feel free to add anything in case I've missed something. -- Q: Why don't we simply try to use existing Java SDK and adapt it for GWT apps? (asked by Michael & Gilad) A: This might be a viable option to consider if we wanted to skip JavaScript-based SDK altogether and target Java/GWT code directly; we could simply take Java SDK and customize its abstractions where necessary, i.e. using HTTP transport layer implementation that works with GWT. In any case, this would mean coupling ourselves to Java SDK (which has its own release cycle) and I think this would complicate things for us. As proposed on the meeting, I think it's best to aim for JavaScript SDK as the lowest common denominator for *any* web application that wants to work with REST API. oVirt GWT-based UI can simply bind to JavaScript SDK, i.e. Java/GWT code that just overlays objects and functions provided by JavaScript SDK. Another reason is ease of maintenance - I'd rather see JavaScript SDK's code generation process to be independent of any other SDK (people responsible for maintaining JavaScript SDK should have full control over generated code). -- Q: What about functionality currently used by oVirt UI but not supported by REST API? (asked by Einav) [For example, fetching VM entity over GWT RPC also returns related data such as Cluster name.] A: Based on discussion I've had with other colleagues after yesterday's review call, I don't think that separate support-like backend layer is a good idea. Instead, this is the kind of functionality that could be placed in oVirt.js library. Logical operations like "get VMs and related data" would be exposed through oVirt.js (callback-based) API and ultimately realized as multiple physical requests to REST API via JavaScript Binding. oVirt.js client would be completely oblivious to the fact that multiple physical requests are dispatched. In fact, since HTTP communication is asynchronous in nature, oVirt.js client wouldn't even notice any difference in terms of API consumption. This assumes JavaScript SDK would use callback-based (non-blocking) API instead of blocking one - after all, blocking API on top of non-blocking implementation sounds pretty much like leaky abstraction [1]. For example: sdk.getVmsWithExtraData( callbackToGetExtraDataForGivenVm, // might cause extra physical requests to REST API callbackFiredWhenAllDataIsReady // update client only when all data is ready ) [1] http://en.wikipedia.org/wiki/Leaky_abstraction -- Last but not least, where to maintain JavaScript SDK projects: low-level JavaScript Binding + high-level oVirt.js library. I agree that conceptually both above mentioned projects should go into dedicated "ovirt-engine-sdk-js" git repository and have their own build/release process. However, for now, we're just making baby steps so let's keep things simple and prototype these projects as part of "ovirt-engine" git repository. ... we can complicate things anytime, but we should know that any complex system that works has inevitably evolved from simple system that works ... (quote from http://en.wikipedia.org/wiki/Gall%27s_law) Regards, Vojtech

4 17

[Engine-devel] oVirt NUMA and Virual NUMA feature wiki page and detailed design page update
by Liao, Chuan (Jason Liao, HPservers-Core-OE-PSC) 14 Feb '14

14 Feb '14

--_000_B63C858E777679458338A30A991BB524015ADE94G1W3780americas_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi All, I am Jason Liao from HP who are in charge of NUMA and Virtual NUMA feature = design. Now I have updated the page of NUMA and Virual NUMA feature wiki page and d= etailed design page http://www.ovirt.org/Features/NUMA_and_Virtual_NUMA http://www.ovirt.org/Features/Detailed_NUMA_and_Virtual_NUMA It is not the finally version, if anyone have some comment, that would be u= seful for us. Best Regards, Jason Liao --_000_B63C858E777679458338A30A991BB524015ADE94G1W3780americas_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"ZH-CN" link=3D"#0563C1" vlink=3D"#954F72" style=3D"text-justi= fy-trim:punctuation"> <div class=3D"WordSection1"> Hi All,<o:p></o:p> <o:p> </o:p> I am Jason Liao from HP who are in = charge of NUMA and Virtual NUMA feature design.<o:p></o:p> <o:p> </o:p> Now I have updated the page of NUMA= and Virual NUMA feature wiki page and detailed design page<o:p></o:p></spa= n> <o:p> </o:p> <a href=3D"http://www.ovirt.org/Fea= tures/NUMA_and_Virtual_NUMA">http://www.ovirt.org/Features/NUMA_and_Virtual= _NUMA</a><o:p></o:p> <o:p> </o:p> <a href=3D"http://www.ovirt.org/Fea= tures/Detailed_NUMA_and_Virtual_NUMA">http://www.ovirt.org/Features/Detaile= d_NUMA_and_Virtual_NUMA</a><o:p></o:p> <o:p> </o:p> It is not the finally version, if a= nyone have some comment, that would be useful for us.<o:p></o:p> <o:p> </o:p> Best= Regards, Jason Liao= <o:p></o:p> <o:p> </o:p> </div> </body> </html> --_000_B63C858E777679458338A30A991BB524015ADE94G1W3780americas_--

1 0

[Engine-devel] [oVirt 3.4 Localization Question #8] "Role: {0} on User {1}" and "User: {0} with Role: {1}"
by Yuko Katabami 14 Feb '14

14 Feb '14

This is a multi-part message in MIME format. --------------000008050208060909050909 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello again, Could someone explain the usage of the following two strings? *File:***CommonApplicationMessages *Resource IDs:* roleOnUser userWithRole* **Strings: * Role: {0} on User {1} (0=roleName, 1=userName) User: {0} with Role: {1} (0=userName, 1=roleName) *Question:* These strings have similar structure --- I wonder if a colon is missing after "User" in the first string. Also could you please let me know where in the GUI it is used. Are these combined with other messages? Thank you. Yuko --------------000008050208060909050909 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hello again, Could someone explain the usage of the following two strings? File: CommonApplicationMessages <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> Resource IDs: <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> roleOnUser userWithRole Strings: Role: {0} on User {1}  <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">   (0=roleName, 1=userName) User: {0} with Role: {1}  (0=userName, 1=roleName) Question: These strings have similar structure --- I wonder if a colon is missing after "User" in the first string. Also could you please let me know where in the GUI it is used. Are these combined with other messages? Thank you. Yuko <div class="moz-signature"> </div> </body> </html> --------------000008050208060909050909--

2 2

[Engine-devel] [oVirt 3.4 Localization Question #6] "snapshot Creation/Preview With Memory"
by Yuko Katabami 14 Feb '14

14 Feb '14

This is a multi-part message in MIME format. --------------090306050102080705090503 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello all, I am a little confused with those two strings and hoping anyone here can help me understand them correctly. *File:*** CommonApplicationConstants* **Resource IDs:* * *snapshotCreationWithMemoryAndPartialDisksWarning snapshotPreviewWithMemoryAndPartialDisksWarning *Strings: * Saving memory may cause data loss when excluding disks! Previewing memory may cause data loss when excluding disks! *Question: * These two strings can be interpreted in a few different ways and I would like have clarification on what they are meant to say. Is "excluding disks" referring to "not including disks to snapshot when creating it?" (Or is it about removing disks?) If you do not include any disks when you create a snapshot, saving in the memory or previewing from the memory may cause data loss? And is "saving" referring to "not using too much" or is it about writing in the memory? Thanks, Yuko --------------090306050102080705090503 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hello all, I am a little confused with those two strings and hoping anyone here can help me understand them correctly. File: <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> CommonApplicationConstants Resource IDs: snapshotCreationWithMemoryAndPartialDisksWarning snapshotPreviewWithMemoryAndPartialDisksWarning <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> Strings: <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> Saving memory may cause data loss when excluding disks! Previewing memory may cause data loss when excluding disks! Question: These two strings can be interpreted in a few different ways and I would like have clarification on what they are meant to say. Is "excluding disks" referring to "not including disks to snapshot when creating it?" (Or is it about removing disks?) If you do not include any disks when you create a snapshot, saving in the memory or previewing from the memory may cause data loss? And is "saving" referring to "not using too much" or is it about writing in the memory? Thanks, Yuko <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </body> </html> --------------090306050102080705090503--

3 3

[Engine-devel] [oVirt 3.4 Localization Question #7] "<Empty>"
by Yuko Katabami 14 Feb '14

14 Feb '14

This is a multi-part message in MIME format. --------------080600040902060806000108 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello again, I have another question on the following string. * File:***CommonApplicationMessages* **Resource ID:* emptyProfile* **String: * <Empty> *Question: *Does this string need to be translated or left in English? Could you tell me where in the GUI it is used? Thank you. Yuko --------------080600040902060806000108 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hello again, I have another question on the following string. File: CommonApplicationMessages Resource ID: <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> emptyProfile String: <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> <Empty> Question: Does this string need to be translated or left in English? Could you tell me where in the GUI it is used? Thank you. Yuko <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </body> </html> --------------080600040902060806000108--

2 2

[Engine-devel] [oVirt/RHEV 3.4 Localization Question #1] Strings with resource ID "ActionGroup___"
by Yuko Katabami 13 Feb '14

13 Feb '14

This is a multi-part message in MIME format. --------------010201070801050002020209 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit (sorry I got wrong number in my last email title. re-sending the same question.) Hello all, I am a Brisbane-based translator working on oVirt 3.4 localization project along with 5 other translators. Our localization cycle is just kicked off and I would like to post our questions here, just like I did for 3.3. It would be appreciated if you could help us. Here is our first question. *File:***LocalizedEnums* **Resource ID:***starting with "ActionGroup___"* **Strings:***including Assign vNIC Profile to Template Assign vNIC Profile to VM Assign vNIC Profile to VM Access Image Storage Domains *Question:* In this file, there are number of strings with the resource ID starting with "ActionGroup___". Could you please let me know the usage? Are these actions used to replace variable in strings such as "Cannot ${action} ${type}"? Or is it more like action buttons? Translation may vary depending on the usage/context and it would be helpful if you could give us some extra information. Kind regards, Yuko --------------010201070801050002020209 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> (sorry I got wrong number in my last email title. re-sending the same question.) Hello all, I am a Brisbane-based translator working on oVirt 3.4 localization project along with 5 other translators. Our localization cycle is just kicked off and I would like to post our questions here, just like I did for 3.3. It would be appreciated if you could help us. Here is our first question. File: LocalizedEnums Resource ID: starting with  "ActionGroup___" Strings: including Assign vNIC Profile to Template Assign vNIC Profile to VM Assign vNIC Profile to VM Access Image Storage Domains Question: In this file, there are number of strings with the resource ID starting with  "ActionGroup___". Could you please let me know the usage? Are these actions used to replace variable in strings such as "Cannot ${action} ${type}"? Or is it more like action buttons? Translation may vary depending on the usage/context and it would be helpful if you could give us some extra information. Kind regards, Yuko </body> </html> --------------010201070801050002020209--

2 2

[Engine-devel] [oVirt 3.4 Localization Question #4] "$vmStatus"
by Yuko Katabami 13 Feb '14

13 Feb '14

This is a multi-part message in MIME format. --------------010601010100070903030301 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello, Sorry to bother you again. I have one more question. * File:***AppErrors* **Resource ID:* start with"VAR__VM_STATUS_"* **Strings:***start with "$vmStatus" *Question: *I would like to check to see if those VM statues should be translated. In the previous releases, we were advised that the statuses included in the listhere <https://gerrit.eng.lab.tlv.redhat.com/gitweb?p=ovirt-engine.git;a=blob_plai…> were untranslated (and these were not pushed to translation). The new strings starting with "$vmStatus" seem to be mostly the same list, but maybe for a different usage? (thus should be translated?) Kind regards, Yuko --------------010601010100070903030301 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hello, Sorry to bother you again. I have one more question. File: AppErrors Resource ID: <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> start with"VAR__VM_STATUS_" Strings: start with "$vmStatus" Question: I would like to check to see if those VM statues should be translated. In the previous releases, we were advised that the statuses included in the list<a href="https://gerrit.eng.lab.tlv.redhat.com/gitweb?p=ovirt-engine.git;a=blob_plai…"> here</a> were untranslated (and these were not pushed to translation). The new strings starting with "$vmStatus" seem to be mostly the same list, but maybe for a different usage? (thus should be translated?) Kind regards, Yuko <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </body> </html> --------------010601010100070903030301--

2 2

[Engine-devel] [oVirt 3.4 Localization Question #3] "$action hot set cpus"
by Yuko Katabami 13 Feb '14

13 Feb '14

This is a multi-part message in MIME format. --------------040600040306030100040905 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello again, I have another question I would like to ask your help. *File:***AppErrors* **Resource ID:* VAR__ACTION__HOT_SET_CPUS* **Strings:***$action hot set cpus *Question: *Could you explain to me about this string? Suppose it is an action to hot-set CPUs, but I am not familiar with the term hot set. Does it mean that you set or change the configuration while the machine/CPU is running (without shutting down)? And this is one of those string that should be part of "Cannot ${action} ${type}." Please correct me if I am wrong. Kind regards, Yuko --------------040600040306030100040905 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hello again, I have another question I would like to ask your help. File: AppErrors Resource ID: VAR__ACTION__HOT_SET_CPUS Strings: $action hot set cpus Question: Could you explain to me about this string? Suppose it is an action to hot-set CPUs, but I am not familiar with the term hot set. Does it mean that you set or change the configuration while the machine/CPU is running (without shutting down)? And this is one of those string that should be part of "Cannot ${action} ${type}." Please correct me if I am wrong. Kind regards, Yuko </body> </html> --------------040600040306030100040905--

2 2

[Engine-devel] [oVirt/RHEV 3.4 Localization Question #2] "Gluster Volume migration of data for remove brick finished"
by Yuko Katabami 13 Feb '14

13 Feb '14

This is a multi-part message in MIME format. --------------030600080109040404050703 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello all, I would like to post another question. *File:***LocalizedEnums* **Resource ID:* AuditLogType___GLUSTER_VOLUME_MIGRATE_BRICK_DATA_FINISHED* **Strings:*** Gluster Volume migration of data for remove brick finished *Question: *I would like to check if my comprehension is correct. Does this mean "Gluster Volume migration of data from removed brick is finished" ? Kind regards, Yuko --------------030600080109040404050703 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hello all, I would like to post another question. File: LocalizedEnums Resource ID: <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> AuditLogType___GLUSTER_VOLUME_MIGRATE_BRICK_DATA_FINISHED Strings: <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> Gluster Volume migration of data for remove brick finished Question: I would like to check if my comprehension is correct. Does this mean "Gluster Volume migration of data from removed brick is finished" ? Kind regards, Yuko <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </body> </html> --------------030600080109040404050703--

2 4

[Engine-devel] [oVirt/RHEV 3.4 Localization Question #16] Strings with resource ID "ActionGroup___"
by Yuko Katabami 13 Feb '14

13 Feb '14

This is a multi-part message in MIME format. --------------020603010501060100010609 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello all, I am a Brisbane-based translator working on oVirt 3.4 localization project along with 5 other translators. Our localization cycle is just kicked off and I would like to post our questions here, just like I did for 3.3. It would be appreciated if you could help us. Here is our first question. *File:***LocalizedEnums* **Resource ID:***starting with "ActionGroup___"* **Strings:***including Assign vNIC Profile to Template Assign vNIC Profile to VM Assign vNIC Profile to VM Access Image Storage Domains *Question:* In this file, there are number of strings with the resource ID starting with "ActionGroup___". Could you please let me know the usage? Are these actions used to replace variable in strings such as "Cannot ${action} ${type}"? Or is it more like action buttons? Translation may vary depending on the usage/context and it would be helpful if you could give us some extra information. Kind regards, Yuko --------------020603010501060100010609 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> Hello all, I am a Brisbane-based translator working on oVirt 3.4 localization project along with 5 other translators. Our localization cycle is just kicked off and I would like to post our questions here, just like I did for 3.3. It would be appreciated if you could help us. Here is our first question. File: LocalizedEnums Resource ID: starting with  "ActionGroup___" Strings: including Assign vNIC Profile to Template Assign vNIC Profile to VM Assign vNIC Profile to VM Access Image Storage Domains <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> Question: In this file, there are number of strings with the resource ID starting with  "ActionGroup___". Could you please let me know the usage? Are these actions used to replace variable in strings such as "Cannot ${action} ${type}"? Or is it more like action buttons? Translation may vary depending on the usage/context and it would be helpful if you could give us some extra information. Kind regards, Yuko </body> </html> --------------020603010501060100010609--

1 0

[Engine-devel] Spice proxy test day support
by Doron Fediuck 12 Feb '14

12 Feb '14

Hi all, I was testing this feature today and would like to summarize my findings; 1. Feature page http://www.ovirt.org/Features/Spice_Proxy Quite informative. Nevertheless things we should improve: - Please add a contact person in case of question / issues (feature owner?). - Detail design? Nothing mentioned with regards to the implementation. This could be in a separate page, but in such a case I'd add a link to that page. - Missing specific examples. ie- supported protocols: engine-config -s SpiceProxyDefault=http://my-ip:8080 * Did you know that http is a default if no scheme stated? All the above should make this cool feature more easy to use by non-developers. 2. Test cases - System level (using engine-config) - Cluster level - VM-Pool level For each of the above I configured a proxy, and on the proxy machine used: "nc -l 8080" to capture the traffic. In all cases things worked quite nicely. I saw incoming connection request which is what I expected for. 3. All-in-all: We have the functionality working which is the important part. Going forward we should try to improve some of the things I mentioned above. Nice work, Doron P.S. During my tests I managed to open 2 non-related bugs on engine-config and network QoS mapper (Class cast issue).

2 1

[Engine-devel] [ovirt-testday] Fake PPC Support - Feedback
by Vinzenz Feenstra 12 Feb '14

12 Feb '14

This is a multi-part message in MIME format. --------------070509070905070907070200 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi, On the test day I was testing the Fake PPC support. I managed to register the Fake PPC host into the engine. However when I tried to run the VM it failed with libvirt responding: * libvirtError: internal error: process exited while connecting to monitor: "kvm" accelerator does not exist.** **No accelerator found!** **KVM not supported for this target** *** Which does not make much sense though. Since it should not try to use 'kvm'. And I am not really sure why it does. Please let me know if there's anything else I would need to provide you so you can figure out what is going on. Right now the server is still in the same state. But I eventually will have to use it for something else. Here's the part of the log which prints the generated DomainXML: Thread-77::DEBUG::2014-01-23 15:43:46,834::vm::3130::vm.Vm::(_run) vmId=`a5409fe7-8054-46ce-91c2-2d565e7edc5b`::<?xml version="1.0" encoding="utf-8"?> <domain type="kvm" xmlns:qemu="http://libvirt.org/schemas/domain/qemu/1.0"> <name>asdfasd</name> <uuid>a5409fe7-8054-46ce-91c2-2d565e7edc5b</uuid> <memory>524288</memory> <currentMemory>524288</currentMemory> <vcpu current="1">1</vcpu> <memtune> <min_guarantee>524288</min_guarantee> </memtune> <devices> <channel type="unix"> <target name="com.redhat.rhevm.vdsm" type="virtio"/> <source mode="bind" path="/var/lib/libvirt/qemu/channels/a5409fe7-8054-46ce-91c2-2d565e7edc5b.com.redhat.rhevm.vdsm"/> </channel> <channel type="unix"> <target name="org.qemu.guest_agent.0" type="virtio"/> <source mode="bind" path="/var/lib/libvirt/qemu/channels/a5409fe7-8054-46ce-91c2-2d565e7edc5b.org.qemu.guest_agent.0"/> </channel> <input bus="usb" type="tablet"/> <graphics autoport="yes" keymap="en-us" listen="0" passwd="*****" passwdValidTo="1970-01-01T00:00:01" port="-1" type="vnc"/> <emulator>/usr/bin/qemu-system-ppc64</emulator> <memballoon model="virtio"/> <controller index="0" type="scsi"> <address type="spapr-vio"/> </controller> <controller index="1" model="virtio-scsi" type="scsi"/> <video> <model heads="1" type="vga" vram="32768"/> </video> <interface type="bridge"> <mac address="00:1a:4a:65:ca:b2"/> <model type="virtio"/> <source bridge="ovirtmgmt"/> <filterref filter="vdsm-no-mac-spoofing"/> <link state="up"/> </interface> <disk device="cdrom" snapshot="no" type="file"> <address bus="0" controller="0" target="0" type="drive" unit="0"/> <source file="" startupPolicy="optional"/> <target bus="scsi" dev="sda"/> <readonly/> <serial/> </disk> <disk device="disk" snapshot="no" type="file"> <source file="/rhev/data-center/mnt/str-02.rhev.lab.eng.brq.redhat.com:_mnt_export_nfs_150_nfs04/efd2a9ce-6417-44e9-ac59-bb577f22bbc3/images/4f6be340-f7b1-4b78-9aa3-7390ffd6bec8/e4f6d99b-c94c-4ae9-8bd6-5212a1d4e9df"/> <target bus="virtio" dev="vda"/> <serial>4f6be340-f7b1-4b78-9aa3-7390ffd6bec8</serial> <boot order="1"/> <driver cache="none" error_policy="stop" io="threads" name="qemu" type="raw"/> </disk> </devices> <os> <type arch="ppc64" machine="pseries">hvm</type> </os> <clock adjustment="0" offset="variable"> <timer name="rtc" tickpolicy="catchup"/> </clock> <cpu> <topology cores="1" sockets="1" threads="1"/> </cpu> <qemu:commandline> <qemu:arg value="-usbdevice"/> <qemu:arg value="keyboard"/> </qemu:commandline> </domain> Thread-77::DEBUG::2014-01-23 15:43:47,566::libvirtconnection::124::root::(wrapper) Unknown libvirterror: ecode: 1 edom: 10 level: 2 message: internal error: process exited while connecting to monitor: "kvm" accelerator does not exist. No accelerator found! KVM not supported for this target Thread-77::DEBUG::2014-01-23 15:43:47,567::vm::2247::vm.Vm::(_startUnderlyingVm) vmId=`a5409fe7-8054-46ce-91c2-2d565e7edc5b`::_ongoingCreations released Thread-77::ERROR::2014-01-23 15:43:47,567::vm::2273::vm.Vm::(_startUnderlyingVm) vmId=`a5409fe7-8054-46ce-91c2-2d565e7edc5b`::The vm start process failed Traceback (most recent call last): File "/usr/share/vdsm/vm.py", line 2233, in _startUnderlyingVm self._run() File "/usr/share/vdsm/vm.py", line 3164, in _run self._connection.createXML(domxml, flags), File "/usr/lib64/python2.7/site-packages/vdsm/libvirtconnection.py", line 92, in wrapper ret = f(*args, **kwargs) File "/usr/lib64/python2.7/site-packages/libvirt.py", line 2920, in createXML if ret is None:raise libvirtError('virDomainCreateXML() failed', conn=self) libvirtError: internal error: process exited while connecting to monitor: "kvm" accelerator does not exist. No accelerator found! KVM not supported for this target Extraction of the capabilities related to this: <guest> <os_type>hvm</os_type> <arch name='ppc'> <wordsize>32</wordsize> <emulator>/usr/bin/qemu-system-ppc</emulator> <machine>g3beige</machine> <machine>prep</machine> <machine>mpc8544ds</machine> <machine>mac99</machine> <machine>ppce500</machine> <machine>virtex-ml507</machine> <machine>bamboo</machine> <machine>taihu</machine> <machine>ref405ep</machine> <machine>none</machine> <domain type='qemu'> </domain> </arch> <features> <cpuselection/> <deviceboot/> </features> </guest> <guest> <os_type>hvm</os_type> <arch name='ppc64'> <wordsize>64</wordsize> <emulator>/usr/bin/qemu-system-ppc64</emulator> <machine>mac99</machine> <machine>prep</machine> <machine>mpc8544ds</machine> <machine>g3beige</machine> <machine>ppce500</machine> <machine>virtex-ml507</machine> <machine>pseries</machine> <machine>bamboo</machine> <machine>taihu</machine> <machine>ref405ep</machine> <machine>none</machine> <domain type='qemu'> </domain> </arch> <features> <cpuselection/> <deviceboot/> </features> </guest> -- Regards, Vinzenz Feenstra | Senior Software Engineer RedHat Engineering Virtualization R & D Phone: +420 532 294 625 IRC: vfeenstr or evilissimo Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com --------------070509070905070907070200 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body text="#000000" bgcolor="#FFFFFF"> Hi, On the test day I was testing the Fake PPC support. I managed to register the Fake PPC host into the engine. However when I tried to run the VM it failed with libvirt responding: libvirtError: internal error: process exited while connecting to monitor: "kvm" accelerator does not exist. No accelerator found! KVM not supported for this target Which does not make much sense though. Since it should not try to use 'kvm'. And I am not really sure why it does. Please let me know if there's anything else I would need to provide you so you can figure out what is going on. Right now the server is still in the same state. But I eventually will have to use it for something else. Here's the part of the log which prints the generated DomainXML: Thread-77::DEBUG::2014-01-23 15:43:46,834::vm::3130::vm.Vm::(_run) vmId=`a5409fe7-8054-46ce-91c2-2d565e7edc5b`::<?xml version="1.0" encoding="utf-8"?> <domain type="kvm" xmlns:qemu=<a class="moz-txt-link-rfc2396E" href="http://libvirt.org/schemas/domain/qemu/1.0">"http://libvirt.org/schemas/domain/qemu/1.0"</a>>         <name>asdfasd</name>         <uuid>a5409fe7-8054-46ce-91c2-2d565e7edc5b</uuid>         <memory>524288</memory>         <currentMemory>524288</currentMemory>         <vcpu current="1">1</vcpu>         <memtune>                 <min_guarantee>524288</min_guarantee>         </memtune>         <devices>                 <channel type="unix">                         <target name="com.redhat.rhevm.vdsm" type="virtio"/>                         <source mode="bind" path="/var/lib/libvirt/qemu/channels/a5409fe7-8054-46ce-91c2-2d565e7edc5b.com.redhat.rhevm.vdsm"/>                 </channel>                 <channel type="unix">                         <target name="org.qemu.guest_agent.0" type="virtio"/>                         <source mode="bind" path="/var/lib/libvirt/qemu/channels/a5409fe7-8054-46ce-91c2-2d565e7edc5b.org.qemu.guest_agent.0"/>                 </channel>                 <input bus="usb" type="tablet"/>                 <graphics autoport="yes" keymap="en-us" listen="0" passwd="*****" passwdValidTo="1970-01-01T00:00:01" port="-1" type="vnc"/>                 <emulator>/usr/bin/qemu-system-ppc64</emulator>                 <memballoon model="virtio"/>                 <controller index="0" type="scsi">                         <address type="spapr-vio"/>                 </controller>                 <controller index="1" model="virtio-scsi" type="scsi"/>                 <video>                         <model heads="1" type="vga" vram="32768"/>                 </video>                 <interface type="bridge">                         <mac address="00:1a:4a:65:ca:b2"/>                         <model type="virtio"/>                         <source bridge="ovirtmgmt"/>                         <filterref filter="vdsm-no-mac-spoofing"/>                         <link state="up"/>                 </interface>                 <disk device="cdrom" snapshot="no" type="file">                         <address bus="0" controller="0" target="0" type="drive" unit="0"/>                         <source file="" startupPolicy="optional"/>                         <target bus="scsi" dev="sda"/>                         <readonly/>                         <serial/>                 </disk>                 <disk device="disk" snapshot="no" type="file">                         <source file="/rhev/data-center/mnt/str-02.rhev.lab.eng.brq.redhat.com:_mnt_export_nfs_150_nfs04/efd2a9ce-6417-44e9-ac59-bb577f22bbc3/images/4f6be340-f7b1-4b78-9aa3-7390ffd6bec8/e4f6d99b-c94c-4ae9-8bd6-5212a1d4e9df"/>                         <target bus="virtio" dev="vda"/>                         <serial>4f6be340-f7b1-4b78-9aa3-7390ffd6bec8</serial>                         <boot order="1"/>                         <driver cache="none" error_policy="stop" io="threads" name="qemu" type="raw"/>                 </disk>         </devices>         <os>                 <type arch="ppc64" machine="pseries">hvm</type>         </os>         <clock adjustment="0" offset="variable">                 <timer name="rtc" tickpolicy="catchup"/>         </clock>         <cpu>                 <topology cores="1" sockets="1" threads="1"/>         </cpu>         <qemu:commandline>                 <qemu:arg value="-usbdevice"/>                 <qemu:arg value="keyboard"/>         </qemu:commandline> </domain> Thread-77::DEBUG::2014-01-23 15:43:47,566::libvirtconnection::124::root::(wrapper) Unknown libvirterror: ecode: 1 edom: 10 level: 2 message: internal error: process exited while connecting to monitor: "kvm" accelerator does not exist. No accelerator found! KVM not supported for this target Thread-77::DEBUG::2014-01-23 15:43:47,567::vm::2247::vm.Vm::(_startUnderlyingVm) vmId=`a5409fe7-8054-46ce-91c2-2d565e7edc5b`::_ongoingCreations released Thread-77::ERROR::2014-01-23 15:43:47,567::vm::2273::vm.Vm::(_startUnderlyingVm) vmId=`a5409fe7-8054-46ce-91c2-2d565e7edc5b`::The vm start process failed Traceback (most recent call last):   File "/usr/share/vdsm/vm.py", line 2233, in _startUnderlyingVm     self._run()   File "/usr/share/vdsm/vm.py", line 3164, in _run     self._connection.createXML(domxml, flags),   File "/usr/lib64/python2.7/site-packages/vdsm/libvirtconnection.py", line 92, in wrapper     ret = f(*args, **kwargs)   File "/usr/lib64/python2.7/site-packages/libvirt.py", line 2920, in createXML     if ret is None:raise libvirtError('virDomainCreateXML() failed', conn=self) libvirtError: internal error: process exited while connecting to monitor: "kvm" accelerator does not exist. No accelerator found! KVM not supported for this target Extraction of the capabilities related to this:   <guest>     <os_type>hvm</os_type>     <arch name='ppc'>       <wordsize>32</wordsize>       <emulator>/usr/bin/qemu-system-ppc</emulator>       <machine>g3beige</machine>       <machine>prep</machine>       <machine>mpc8544ds</machine>       <machine>mac99</machine>       <machine>ppce500</machine>       <machine>virtex-ml507</machine>       <machine>bamboo</machine>       <machine>taihu</machine>       <machine>ref405ep</machine>       <machine>none</machine>       <domain type='qemu'>       </domain>     </arch>     <features>       <cpuselection/>       <deviceboot/>     </features>   </guest>   <guest>     <os_type>hvm</os_type>     <arch name='ppc64'>       <wordsize>64</wordsize>       <emulator>/usr/bin/qemu-system-ppc64</emulator>       <machine>mac99</machine>       <machine>prep</machine>       <machine>mpc8544ds</machine>       <machine>g3beige</machine>       <machine>ppce500</machine>       <machine>virtex-ml507</machine>       <machine>pseries</machine>       <machine>bamboo</machine>       <machine>taihu</machine>       <machine>ref405ep</machine>       <machine>none</machine>       <domain type='qemu'>       </domain>     </arch>     <features>       <cpuselection/>       <deviceboot/>     </features>   </guest> <pre class="moz-signature" cols="72">-- Regards, Vinzenz Feenstra | Senior Software Engineer RedHat Engineering Virtualization R & D Phone: +420 532 294 625 IRC: vfeenstr or evilissimo Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com</pre> </body> </html> --------------070509070905070907070200--

3 3

[Engine-devel] webadmin (vs) rest-api & transition plan
by Sven Kieske 10 Feb '14

10 Feb '14

Hi devs, I want to talk about the current development style and the (somewhat) planned transition from webadmin today to a webadmin which uses REST for communication. I honestly don't see how this goal can be achieved, given the current development pattern, but I may be wrong. e.g. this bug: https://bugzilla.redhat.com/show_bug.cgi?id=1061131 it asks for a feature being available in GUI/webadmin. I'm pretty sure this gets implemented and adds another feature to the list which is not implemented via REST, thus leading to an even higher gap between REST and webadmin. Following this pattern will make the goal of using REST everywhere not easier to achieve. If you really want to build everything upon REST, or at least, transition everything to REST, there should be a policy that new features should be developed for REST access first. I don't know if such a policy is already in place and I know it will take some time for the transition, but what I observe leads me to the conclusion that the gap gets greater. What do you think? Are there any plans inside RH which I don't know regarding this transition? Maybe something you can share with your REST-Users? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

3 2

[Engine-devel] oVirt test day tomorrow
by Doron Fediuck 10 Feb '14

10 Feb '14

Just a reminder that tomorrow we plan to have oVirt 3.4 2nd test day. More details coming soon.

1 0

Re: [Engine-devel] ovirt-engine_master_create_rpms is experiencing some weird issue
by Eyal Edri 09 Feb '14

09 Feb '14

it looks like it's really failing on creating the rpms as well : http://jenkins.ovirt.org/job/ovirt-engine_master_create_rpms/1471/label=cen… on webadmin. can someone have a look? eyal. ----- Original Message ----- > From: "Sandro Bonazzola" <sbonazzo(a)redhat.com> > To: "infra" <infra(a)ovirt.org> > Sent: Friday, February 7, 2014 10:00:02 AM > Subject: ovirt-engine_master_create_rpms is experiencing some weird issue > > Hi, > http://jenkins.ovirt.org/job/ovirt-engine_master_create_rpms is experiencing > some weird issue. > pending #1454 (pending—Waiting for next available executor) > Nothing is currently running on jenkins so all executors are available. > Build Now doesn't work > Abort execution doesn't work > Rebuild last doesn't work > > Can you take a look? > Thanks > > -- > Sandro Bonazzola > Better technology. Faster innovation. Powered by community collaboration. > See how it works at redhat.com > _______________________________________________ > Infra mailing list > Infra(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/infra >

2 2

[Engine-devel] FOSDEM slides + recordings available
by Doron Fediuck 09 Feb '14

09 Feb '14

http://www.ovirt.org/FOSDEM_2014#Sessions I will continue to update with recordings (and last slides) as it becomes available. This is also a good chance to thank everyone involved. People who practiced, spoke, volunteered for stand shifts, Video handling, helping with the oVirt-live, carrying maps, laptops, handout-sheets, poster-sign to/from UBL and other logistics. Special thanks to Joop, René, Jorick, Robert and Alexander who joined us in ULB . We got a big and very positive exposure for oVirt, which as you'll be able to hear is getting a lot of community attention now. See you in FOSDEM 2015 ;) Doron

1 0

[Engine-devel] [ANN] oVirt 3.4.0 beta2 is now available
by Sandro Bonazzola 07 Feb '14

07 Feb '14

The oVirt team is pleased to announce that the 3.4.0 second beta release is now available for testing. Release notes and information on the changes for this update are still being worked on and will be available soon on the wiki[1]. Please ensure to follow install instruction from release notes if you're going to test it. The existing repository ovirt-3.4.0-prerelease has been updated for delivering this beta and future refreshes until release candidate. A new oVirt Node build will be available soon as well. You're welcome to join us testing this beta release in next week test day [2] scheduled for 2014-02-11! [1] http://www.ovirt.org/OVirt_3.4.0_release_notes [2] http://www.ovirt.org/OVirt_3.4_Test_Day -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

[Engine-devel] ATTN: UICommon: new dialog model attribute - HelpTag
by Greg Sheremeta 06 Feb '14

06 Feb '14

Hi all, To make it easier to support context-sensitive help in webadmin and userportal, we added a model attribute called HelpTag to all models. from now on: for any new dialog that you create, please remember to do the following: - add a call to setHelpTag before after the call to setHashName in the new model. - add the relevant dialog meta-data in HelpTag.java [We didn't make it a constructor argument because that's quite invasive] I updated all the current models in [1] to have this new call. This is effective immediately in 'master' - we intend to backport this functionality to ovirt-engine-3.4 very soon. Greg [1] http://gerrit.ovirt.org/#/c/21052/ Greg Sheremeta Red Hat, Inc. Sr. Software Engineer, RHEV Cell: 919-807-1086 gshereme(a)redhat.com

1 0

[Engine-devel] Problem creating hosts.
by Sérgio Ribeiro 05 Feb '14

05 Feb '14

--_46FF3AC8-76AD-4C8E-803D-18759F7CEFEB_ Content-Transfer-Encoding: base64 Content-Type: text/plain; charset="utf-8" SeKAmW0gbmV3YmllIGluIG92aXJ0IGFuZCBhZnRlciBpbnN0YWxsaW5nIG92aXJ0LCB3aXRoIGNv bWFuZCBlbmdpbmUtc2V0dXAsIA0KaSBnbyB0byBsb2NhbGhvc3Qvb3ZpcnQtZW5naW5lIGFuZCBp IGxvZyBvbiB0aGUgd2VicGFnZS4gT24gZGF0YSBjZW50ZXIgb25seSBhcHBlYXJzIGEgZGVmYXVs dCBkYXRhLWNlbnRlciB3aXRoIG5vIGhvc3RzLiBpIHRyaWUgdG8gY3JlYXRlIGEgaG9zdCBhbmQg YXBwZWFycyBuYSBlcnJvciBiZWNhdXNlIHRoZSBuYW1lIGFuZCBhZGRyZXNzIG9mIHRoZSBob3N0 LiBpdHMgYSBsb2NhbCBtYWNoaW5lIGZvciB0ZXN0cyB3aXRoIG5vIGRvbWFpbi4NCnRoZSBjb25m aWcgdGhhdCBpIHVzZSBpcyBuYW1lOmhvc3QxLmxvY2FsZG9tYWluLCBhZGRyZXNzOiAxOTIuMTY4 LjIuMSwgYW5kIGkgY3JlYXRlZCB0aGlzIGNvbmZpZyBvbiBldGMvaG9zdHMgZmlsZS4NCg0KY2Fu IHlvdSBoZWxwIG1lPw0KDQpCZXN0IHJlZ2FyZHMNCg0KDQoNCg0KDQoNCg0KRW52aWFkbyBkZSBD b3JyZWlvIGRvIFdpbmRvd3M= --_46FF3AC8-76AD-4C8E-803D-18759F7CEFEB_ Content-Transfer-Encoding: base64 Content-Type: text/html; charset="utf-8" CjxodG1sPgo8aGVhZD4KPG1ldGEgbmFtZT0iZ2VuZXJhdG9yIiBjb250ZW50PSJXaW5kb3dzIE1h aWwgMTcuNS45NjAwLjIwMzE1Ij4KPHN0eWxlIGRhdGEtZXh0ZXJuYWxzdHlsZT0idHJ1ZSI+PCEt LQpwLk1zb0xpc3RQYXJhZ3JhcGgsIGxpLk1zb0xpc3RQYXJhZ3JhcGgsIGRpdi5Nc29MaXN0UGFy YWdyYXBoIHsKbWFyZ2luLXRvcDowaW47Cm1hcmdpbi1yaWdodDowaW47Cm1hcmdpbi1ib3R0b206 MGluOwptYXJnaW4tbGVmdDouNWluOwptYXJnaW4tYm90dG9tOi4wMDAxcHQ7Cn0KcC5Nc29Ob3Jt YWwsIGxpLk1zb05vcm1hbCwgZGl2Lk1zb05vcm1hbCB7Cm1hcmdpbjowaW47Cm1hcmdpbi1ib3R0 b206LjAwMDFwdDsKfQpwLk1zb0xpc3RQYXJhZ3JhcGhDeFNwRmlyc3QsIGxpLk1zb0xpc3RQYXJh Z3JhcGhDeFNwRmlyc3QsIGRpdi5Nc29MaXN0UGFyYWdyYXBoQ3hTcEZpcnN0LCAKcC5Nc29MaXN0 UGFyYWdyYXBoQ3hTcE1pZGRsZSwgbGkuTXNvTGlzdFBhcmFncmFwaEN4U3BNaWRkbGUsIGRpdi5N c29MaXN0UGFyYWdyYXBoQ3hTcE1pZGRsZSwgCnAuTXNvTGlzdFBhcmFncmFwaEN4U3BMYXN0LCBs aS5Nc29MaXN0UGFyYWdyYXBoQ3hTcExhc3QsIGRpdi5Nc29MaXN0UGFyYWdyYXBoQ3hTcExhc3Qg ewptYXJnaW4tdG9wOjBpbjsKbWFyZ2luLXJpZ2h0OjBpbjsKbWFyZ2luLWJvdHRvbTowaW47Cm1h cmdpbi1sZWZ0Oi41aW47Cm1hcmdpbi1ib3R0b206LjAwMDFwdDsKbGluZS1oZWlnaHQ6MTE1JTsK fQotLT48L3N0eWxlPjwvaGVhZD4KPGJvZHkgZGlyPSJsdHIiPgo8ZGl2IGRhdGEtZXh0ZXJuYWxz dHlsZT0iZmFsc2UiIGRpcj0ibHRyIiBzdHlsZT0iZm9udC1mYW1pbHk6ICdDYWxpYnJpJywgJ1Nl Z29lIFVJJywgJ01laXJ5bycsICdNaWNyb3NvZnQgWWFIZWkgVUknLCAnTWljcm9zb2Z0IEpoZW5n SGVpIFVJJywgJ01hbGd1biBHb3RoaWMnLCAnc2Fucy1zZXJpZic7Zm9udC1zaXplOjEycHQ7Ij4K PGRpdj5J4oCZbSBuZXdiaWUgaW4gb3ZpcnQgYW5kIGFmdGVyIGluc3RhbGxpbmcgb3ZpcnQsIHdp dGggY29tYW5kIGVuZ2luZS1zZXR1cCwgPGJyPmkgZ28gdG8gbG9jYWxob3N0L292aXJ0LWVuZ2lu ZSBhbmQgaSBsb2cgb24gdGhlIHdlYnBhZ2UuIE9uIGRhdGEgY2VudGVyIG9ubHkgYXBwZWFycyBh IGRlZmF1bHQgZGF0YS1jZW50ZXIgd2l0aCBubyBob3N0cy4gaSB0cmllIHRvIGNyZWF0ZSBhIGhv c3QgYW5kIGFwcGVhcnMgbmEgZXJyb3IgYmVjYXVzZSZuYnNwO3RoZSBuYW1lIGFuZCBhZGRyZXNz IG9mIHRoZSBob3N0LiBpdHMgYSBsb2NhbCBtYWNoaW5lIGZvciB0ZXN0cyB3aXRoIG5vIGRvbWFp bi48YnI+dGhlIGNvbmZpZyB0aGF0IGkgdXNlIGlzIG5hbWU6aG9zdDEubG9jYWxkb21haW4sIGFk ZHJlc3M6IDE5Mi4xNjguMi4xLCBhbmQgaSBjcmVhdGVkIHRoaXMgY29uZmlnIG9uIGV0Yy9ob3N0 cyBmaWxlLjxicj48YnI+Y2FuIHlvdSBoZWxwIG1lPzxicj48YnI+QmVzdCByZWdhcmRzPGJyPjxi cj48L2Rpdj48ZGl2IGRhdGEtc2lnbmF0dXJlYmxvY2s9InRydWUiPjxkaXY+PGJyPjwvZGl2Pjxk aXY+RW52aWFkbyBkZSBDb3JyZWlvIGRvIFdpbmRvd3M8L2Rpdj48ZGl2Pjxicj48L2Rpdj48L2Rp dj4KCgo8L2Rpdj4KPC9ib2R5Pgo8L2h0bWw+Cg== --_46FF3AC8-76AD-4C8E-803D-18759F7CEFEB_--

3 2

[Engine-devel] GWT Development Mode won't be supported in Firefox 27+
by Greg Sheremeta 04 Feb '14

04 Feb '14

According to the plugin author, GWT Development Mode won't be supported in Firefox 27+. [1] I suppose workarounds will be developing in Chrome, developing with Firefox 24 ESR perhaps, or investigating GWT Super Dev Mode. [2] [1] https://plus.google.com/+BrianSlesinsky/posts/2ZsefAgkV8j [2] http://www.gwtproject.org/articles/superdevmode.html Greg Sheremeta Red Hat, Inc. Sr. Software Engineer, RHEV Cell: 919-807-1086 gshereme(a)redhat.com

1 0

[Engine-devel] ovirt-engine build segfault on Fedora 20
by Greg Sheremeta 04 Feb '14

04 Feb '14

Caution on upgrading your dev machine to Fedora 20. GWT compilation of "safari" (for Chrome) causes a segfault during the build. Strangely, the build appears to work, so I'm not sure what the net effect of the segfault is. If you only compile for gecko (Firefox) [the default], you won't see the segfault. In other words, make clean install-dev PREFIX=$HOME/ovirt-engine DEV_EXTRA_BUILD_FLAGS_GWT_DEFAULTS="-Dgwt.userAgent=gecko1_8,safari" causes the segfault But make install-dev PREFIX="$HOME/ovirt-engine" works just fine. I've duplicated this with with both OpenJDK and Oracle JDK. If you'd like to duplicate, simple install a fresh F20 VM, and then run these commands: 1 sudo yum install nano 2 sudo nano /etc/hostname #set the hostname 3 sudo nano /etc/hosts #set the hostname 5 sudo yum install http://ovirt.org/releases/ovirt-release-fedora.noarch.rpm 6 sudo yum install git java-devel maven openssl postgresql-server m2crypto python-psycopg2 python-cheetah python-daemon libxml2-python jboss-as unzip otopi 7 mkdir projects 8 cd projects/ 9 git clone git://gerrit.ovirt.org/ovirt-engine 10 cd ovirt-engine/ 11 make install-dev PREFIX="$HOME/ovirt-engine" Greg Sheremeta Red Hat, Inc. Sr. Software Engineer, RHEV Cell: 919-807-1086 gshereme(a)redhat.com

3 8

[Engine-devel] New gerrit flags behavior
by David Caro 04 Feb '14

04 Feb '14

This is an OpenPGP/MIME signed message (RFC 4880 and 3156) --uBNWC8njJPiGVqbVGpsO04mklfCaCVaix Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Hi everyone! With the latest gerrit upgrade it has become easier to add the propagatio= n of the Code Review and Verified flags when doing a trivial rebase or when no= code was changed, so I've enabled those features for all the projects! The change should become effective right away, so let me know if you have= any issues. Enjoy! --=20 David Caro Red Hat S.L. Continuous Integration Engineer - EMEA ENG Virtualization R&D Email: dcaro(a)redhat.com Web: www.redhat.com RHT Global #: 82-62605 --uBNWC8njJPiGVqbVGpsO04mklfCaCVaix Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAEBAgAGBQJS6PjbAAoJEEBxx+HSYmnD8V4IAIBrbYSMUPTtqrCqg3A46p10 OQfOvb/hm8dGQ4AQ1kP/7GmNYwzk7GjJxVCKZkXfsAaxu3yFSByfjiS9Y/UVF6C+ qWxyBZrifUFFZFBrCEZWlcu+7DbeZaJpu4F2lMwloD/RbydqVm31iHc3X+N6WkUs IglFQkXIWiCJANA3BAdtG0/vIzlOpU7thmBnJVdWUOdxpG0yYMWJwU96M1sxBcqm sDPbVOlk7UHIs1sSSmQDoQOV+U0o3HtskM8wD4lm62ecPrpqYXQqd4W7TmjXGtcy UYwVR5VRa2xnJp6UjxJnaTu2ibYpbBs0L+p5RLf7uNUy7aEmqhc9RysHQpD6CpY= =91bd -----END PGP SIGNATURE----- --uBNWC8njJPiGVqbVGpsO04mklfCaCVaix--

2 1

[Engine-devel] [QE] oVirt 3.4.0 beta status
by Sandro Bonazzola 04 Feb '14

04 Feb '14

Hi, oVirt 3.4.0 beta has been released and is actually on QA. We're going to tart composing oVirt 3.4.0 beta2 this Thursday 2014-02-06 09:00 UTC from 3.4 branches. This build will be used for a second Test Day scheduled for 2014-02-11. The bug tracker [1] shows the following bugs blocking the release: Whiteboard Bug ID Status Summary gluster 1038988 POST Gluster brick sync does not work when host has multiple interfaces gluster 1059606 POST Errors in rebalance and remove-brick status and sync integration 1054080 POST gracefully warn about unsupported upgrade from legacy releases integration 1058018 POST upgrade from 3.3 overwrites exports with acl None There are still 393 bugs [2] targeted to 3.4.0. Excluding node and documentation bugs we still have 238 bugs [3] targeted to 3.4.0. Please review them as soon as possible. Maintainers: - Please remember to rebuild your packages before 2014-02-06 09:00 UTC if you want them to be included in 3.4.0 beta. - Please add the bugs to the tracker if you think that 3.4.0 should not be released without them fixed. - Please provide ETA on blockers bugs - Please update the target to 3.4.1 or any next release for bugs that won't be in 3.4.0: it will ease gathering the blocking bugs for next releases. - Please fill release notes, the page has been created here [4] - Please update http://www.ovirt.org/OVirt_3.4_TestDay before 2014-02-11 For those who want to help testing the bugs, I suggest to add yourself as QA contact for the bug. Please also be prepared for upcoming oVirt 3.4.0 Test Day on 2014-02-11! Thanks to all people already testing 3.4.0 beta! [1] https://bugzilla.redhat.com/1024889 [2] http://red.ht/1eIRZXM [3] http://red.ht/1auBU3r [4] http://www.ovirt.org/OVirt_3.4.0_release_notes -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

2 2

[Engine-devel] Junit code coverage
by Sahina Bose 04 Feb '14

04 Feb '14

Hi, Do we have a jenkins job that does cobertura / similar code coverage metrics for oVirt? thanks sahina

2 3

[Engine-devel] oVirt 3.3.3 release
by Sandro Bonazzola 03 Feb '14

03 Feb '14

The oVirt development team is very happy to announce the general availability of oVirt 3.3.3 as of February 3rd 2013. This release solidifies oVirt as a leading KVM management application and open source alternative to VMware vSphere. oVirt is available now for Fedora 19 and Red Hat Enterprise Linux 6.5 (or similar). This release of oVirt includes numerous bug fixes. See the release notes [1] for a list of the new features and bugs fixed. IMPORTANT NOTE: If you're upgrading from a previous version, please update ovirt-release to the latest version (10.0.1-3) and verify you have the correct repositories enabled by running the following commands # yum update ovirt-release # yum repolist enabled before upgrading with the usual procedure. You should see the ovirt-3.3.3 and ovirt-stable repositories listed in the output of the repolist command. A new oVirt Node build will be available soon as well. [1] http://www.ovirt.org/OVirt_3.3.3_release_notes -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

[Engine-devel] mom RPMs for 3.4
by Adam Litke 03 Feb '14

03 Feb '14

Hi Sandro, After updating the MOM project's build system, I have used jenkins to produce a set of RPMs that I would like to tag into the oVirt 3.4 release. Please see the jenkins job [1] for the relevant artifacts for EL6[2], F19[3], and F20[4]. Dan, should I submit a patch to vdsm to make it require mom >= 0.4.0? I want to be careful to not break people's environments this late in the 3.4 release cycle. What is the best way to minimize that damage? [1] http://jenkins.ovirt.org/view/All/job/manual-build-tarball/179/ [2] http://jenkins.ovirt.org/view/All/job/manual-build-tarball/179/label=centos… [3] http://jenkins.ovirt.org/view/All/job/manual-build-tarball/179/label=fedora… [4] http://jenkins.ovirt.org/view/All/job/manual-build-tarball/179/label=fedora…

4 9

[Engine-devel] oVirt January 2014 Updates
by Itamar Heim 03 Feb '14

03 Feb '14

1. VERSIONS - oVirt 3.3.3 in last phases http://www.ovirt.org/OVirt_3.3.3_release_notes - oVirt 3.4 with another slew of features is getting into test day, beta, etc. http://red.ht/1eo9TiS 2. WORKSHOPS - Fosdem - oVirt stand wass packed as well as a virt & IaaS devroom, with many oVirt talks. more details next time. - more oVirt talks in cfgmgmtcamp and infra.next this week, including: -- Hervé Leclerc "How we build a cloud with CentOS, oVirt, and Cisco-UCS" Wednesday 5th February in Infrastructure.Next Ghent http://bit.ly/1fjTJVC -- oVirt Node being used as a Discovery Node in The Foreman project talk at cfgmgmtcamp, february 3rd http://bit.ly/1gAnneI - oVirt Korea group meeting this Saturday in Seoul Register here http://onoffmix.com/event/23134 - Open Virtualization Workshop in Tehran (26,27 February 2014) & Isfahan (5,6 March 2014) http://t.co/9PR3BxOnpd 3. USING oVirt - More details on Wind River using ovirt http://bit.ly/1i2LtLI - New Case Study: Nieuwland Geo-Informati http://www.ovirt.org/Nieuwland_case_study - oVirt Node being used as a Discovery Node in The Foreman project talk at cfgmgmtcamp, february 3rd http://bit.ly/1gAnneI 4. Users - Double the amount of emails on users mailing list- up from 800 to 1600 this month! - Karli updated how to use spice with ovirt from OS X http://www.ovirt.org/SPICE_Remote-Viewer_on_OS_X - Opaque (spice android ovirt client) v1.1.8 beta released https://plus.google.com/communities/116099119712127782216 - how to deploy windows guest agent on windows: http://bit.ly/1kr5tJo - Andrew Lau posted on working through Hosted Engine with 3.4.0 beta http://bit.ly/1eobzZw - Deep Dive into oVirt 3.3.3 by Li Jiansheng (chinese) http://slidesha.re/1eFWQ8G - Matthew Bingham posted a series of video on setting up ovirt: Install oVirt 3.3.2 http://www.youtube.com/watch?v=GWT-m-oWSjQ Optional export nfs mount for oVirt 3.3.2 http://www.youtube.com/watch?v=MLbPln5-2jE Initial webgui oVirt 3.3.2 Steps for storage http://www.youtube.com/watch?v=dL0_03ZICw4 Download and upload client iso to ISO_DOMAIN for oVirt 3.3.2 http://www.youtube.com/watch?v=pDzTHFSmvGE

1 0

[Engine-devel] [ANN] engine-manage-domains arguments changed
by Martin Perina 03 Feb '14

03 Feb '14

Hi, patch, that changes engine-manage-domains command line arguments from Java type (-someOption) to standard long type (--some-option), was merged today. Please consult man page or run engine-manage-domains --help to find out differences. Thanks Martin Perina

2 1

Re: [Engine-devel] mom RPMs for 3.4
by Sandro Bonazzola 03 Feb '14

03 Feb '14

Il 03/02/2014 09:35, Amedeo Salvati ha scritto: > > Da: arch-bounces(a)ovirt.org > A: "Dan Kenigsberg" danken(a)redhat.com,"Adam Litke" alitke(a)redhat.com > Cc: engine-devel(a)ovirt.org,"arch" arch(a)ovirt.org,"VDSM Project Development" vdsm-devel(a)lists.fedorahosted.org > Data: Mon, 03 Feb 2014 08:50:12 +0100 > Oggetto: Re: mom RPMs for 3.4 > >> Il 01/02/2014 23:48, Dan Kenigsberg ha scritto: >> > On Fri, Jan 31, 2014 at 04:56:12PM -0500, Adam Litke wrote: >> >> On 31/01/14 08:36 +0100, Sandro Bonazzola wrote: >> >>> Il 30/01/2014 19:30, Adam Litke ha scritto: >> >>>> On 30/01/14 18:13 +0000, Dan Kenigsberg wrote: >> >>>>> On Thu, Jan 30, 2014 at 11:49:42AM -0500, Adam Litke wrote: >> >>>>>> Hi Sandro, >> >>>>>> >> >>>>>> After updating the MOM project's build system, I have used jenkins to >> >>>>>> produce a set of RPMs that I would like to tag into the oVirt 3.4 >> >>>>>> release. Please see the jenkins job [1] for the relevant artifacts >> >>>>>> for EL6[2], F19[3], and F20[4]. >> >>>>>> >> >>>>>> Dan, should I submit a patch to vdsm to make it require mom >= 0.4.0? >> >>>>>> I want to be careful to not break people's environments this late in >> >>>>>> the 3.4 release cycle. What is the best way to minimize that damage? >> >>>>> >> >>>>> Hey, we're during beta. I prefer making this requirement explicit now >> >>>>> over having users with supervdsmd.log retate due to log spam. >> >>>> >> >>>> In that case, Sandro, can you let me know when those RPMs hit the >> >>>> ovirt repos (for master and 3.4) and then I will submit a patch to >> >>>> vdsm to require the new version. >> >>> >> >>> >> >>> mom 0.4.0 has been built in last night nightly job [1] and published to nightly by publisher job [2] >> >>> so it's already available on nightly [3] >> >>> >> >>> For 3.4.0, it has been planned [4] a beta 2 release on 2014-02-06 so we'll include your builds in that release. >> >> >> >> I presume the scripting for 3.4 release rpms will produce a version >> >> without the git-rev based suffix: ie. mom-0.4.0-1.rpm? >> >> >> >> I need to figure out how to handle a problem that might be a bit >> >> unique to mom. MOM is used by non-oVirt users who install it from the >> >> main Fedora repository. I think it's fine that we are producing our >> >> own rpms in oVirt (that may have additional patches applied and may >> >> resync to upstream mom code more frequently than would be desired for >> >> the main Fedora repository). Given this, I think it makes sense to >> >> tag the oVirt RPMs with a special version suffix to indicate that >> >> these are oVirt produced and not upstream Fedora. >> >> >> >> For example: >> >> The next Fedora update will be mom-0.4.0-1.f20.rpm. >> >> The next oVirt update will be mom-0.4.0-1ovirt.f20.rpm. >> >> >> >> Is this the best practice for accomplishing my goals? One other thing >> >> I'd like to have the option of doing is to make vdsm depend on an >> >> ovirt distribution of mom so that the upstream Fedora version will not >> >> satisfy the dependency for vdsm. >> > >> > What is the motivation for this? You would not like to bother Fedora >> > users with updates that are required only for oVirt? >> > >> > Vdsm itself is built, signed, and distributed via Fedora. >> > It is also copied into the ovirt repo, for completeness sake. Could MoM >> > do the same? >> >> IMHO, if we're distributing mom and vdsm rpms through Fedora yum repository we should not duplicate it on ovirt yum repository. >> Fedora package is signed and will differ from the one we're shipping within ovirt repo (which is unsigned) >> We should provide on resource.ovirt.org only packages not available on "downstream" repositories (like nightly builds). > > why you can't sign your rpms??? We're working on that :-) > > on ovirt web page http://www.ovirt.org/Home you can change: > > Enhanced security: SELinux and Mandatory Access Control for VMs and hypervisor > > with: > > Enhanced security: SELinux and Mandatory Access Control for VMs and hypervisor (but not signed rpms) > > best regards > a > >> >> >> > >> > Dan. >> > >> >> >> -- >> Sandro Bonazzola >> Better technology. Faster innovation. Powered by community collaboration. >> See how it works at redhat.com >> _______________________________________________ >> Arch mailing list >> Arch(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/arch -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0