- Devel - oVirt List Archives

oVirt 4.5.0 Beta is now available for testing
by Sandro Bonazzola 07 Apr '22

07 Apr '22

oVirt 4.5.0 Beta is now available for testing The oVirt project is excited to announce the availability of oVirt 4.5.0 Beta release for testing , as of April 6th, 2022. This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.4. Important notes before you try it Please note this is a Beta release. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production, and it is not feature complete. In particular, please note that upgrades from 4.4 and future upgrades from this beta to the final 4.5 release from this version are not supported. Some of the features included in oVirt 4.5.0 Beta require content that will be available in RHEL 8.6 and derivatives which are currently included in CentOS Stream 8. Known issues After BETA compose finished a few issues have been found: - Cluster upgrade is not working, fix in progress: https://github.com/oVirt/ovirt-ansible-collection/pull/474 - Hosted Engine setup fails on Keycloak configuration, fix in progress: https://github.com/oVirt/ovirt-ansible-collection/pull/475 An async beta refresh will be issued as soon as the fix will be ready. Documentation Be sure to follow instructions for oVirt 4.5! - If you want to try oVirt as quickly as possible, follow the instructions on the Download <https://ovirt.org/download/> page. - For complete installation, administration, and usage instructions, see the oVirt Documentation <https://ovirt.org/documentation/>. - For upgrading from a previous version, see the oVirt Upgrade Guide <https://ovirt.org/documentation/upgrade_guide/>. - For a general overview of oVirt, see About oVirt <https://ovirt.org/community/about.html>. What’s new in oVirt 4.5.0 Beta Release? This release is available now on x86_64 architecture for: - CentOS Stream 8 - RHEL 8.6 Beta and derivatives This release supports Hypervisor Hosts on x86_64: - oVirt Node NG (based on CentOS Stream 8) - CentOS Stream 8 - RHEL 8.6 Beta and derivatives Builds are also available for ppc64le and aarch64. Experimental builds for CentOS Stream 9 are also provided for Hypervisor Hosts. Security fixes included in oVirt 4.5 compared to latest oVirt 4.4.10: - CVE-2021-33502 <https://access.redhat.com/security/cve/CVE-2021-33502> [moderate] ovirt-web-ui: normalize-url: ReDoS for data URLs - CVE-2022-0207 <https://access.redhat.com/security/cve/CVE-2022-0207> [low] vdsm: disclosure of sensitive values in log files - CVE-2022-24302 <https://access.redhat.com/security/cve/CVE-2022-24302> [moderate] python-paramiko: Race condition in the write_private_key_file function - CVE-2021-41182 <https://access.redhat.com/security/cve/CVE-2021-41182> [moderate] jquery-ui: XSS in the altField option of the datepicker widget [ovirt-engine] - CVE-2021-41183 <https://access.redhat.com/security/cve/CVE-2021-41183> [moderate] jquery-ui: XSS in *Text options of the datepicker widget [ovirt-engine] - CVE-2021-41184 <https://access.redhat.com/security/cve/CVE-2021-41184> [moderate] jquery-ui: XSS in the 'of' option of the .position() util [ovirt-engine] - CVE-2021-33502 <https://access.redhat.com/security/cve/CVE-2021-33502> [moderate] ovirt-engine-ui-extensions: normalize-url: ReDoS for data URLs - CVE-2021-23425 <https://access.redhat.com/security/cve/CVE-2021-23425> [moderate] ovirt-engine-ui-extensions: nodejs-trim-off-newlines: ReDoS via string processing - CVE-2021-3807 <https://access.redhat.com/security/cve/CVE-2021-3807> [moderate] ovirt-engine-ui-extensions: nodejs-ansi-regex: Regular expression denial of service (ReDoS) matching ANSI escape codes oVirt Node includes updated packages with fixes for: - CVE-2022-25235 <https://access.redhat.com/security/cve/CVE-2022-25235> [important] expat: Malformed 2- and 3-byte UTF-8 sequences can lead to arbitrary code execution - CVE-2022-25315 <https://access.redhat.com/security/cve/CVE-2022-25315> [important] expat: Integer overflow in storeRawNames() - CVE-2022-25236 <https://access.redhat.com/security/cve/CVE-2022-25236> [important] expat: Namespace-separator characters in "xmlns[:prefix]" attribute values can lead to arbitrary code execution - CVE-2021-4083 <https://access.redhat.com/security/cve/CVE-2021-4083> [important] kernel: fget: check that the fd still exists after getting a ref to it - CVE-2022-0847 <https://access.redhat.com/security/cve/CVE-2022-0847> [important] kernel: improper initialization of the "flags" member of the new pipe_buffer - CVE-2022-0778 <https://access.redhat.com/security/cve/CVE-2022-0778> [important] openssl: Infinite loop in BN_mod_sqrt() reachable when parsing certificates Some of the RFEs with high user impact are listed below: - 1782077 [RFE] More Flexible RHV CPU Allocation Policy with HyperThreading - 1922977 [RFE] VM shared disks are not part of the OVF_STORE - 977778 [RFE] - Mechanism for converting disks for non-running VMS - 1926625 [RFE] How to enable HTTP Strict Transport Security (HSTS) on Apache HTTPD for Red Hat Virtualization Manager - 2029830 [RFE] Hosted engine should accept OpenSCAP profile name instead of bool - 1933555 [RFE] Release python-ovirt-engine-sdk4 package on RHEL 9 - 1782056 [RFE] Integration of built-in ipsec feature in RHV/RHHI-V with OVN - 1849169 [RFE] add virtualCPUs/physicalCPUs ratio property to evenly_distributed policy - 1624015 [RFE] Expose Console Options and Console invocation via API - 1998255 [RFE] [UI] Add search box for vNIC Profiles in RHVM WebUI on the main vNIC profiles tab - 1987121 [RFE] Support enabling nVidia Unified Memory on mdev vGPU - 2058177 [RFE] Include the package nvme-cli on virtualization hosts - 1927985 [RFE] Speed up export-to-OVA on NFS by aligning loopback device offset - 2021217 [RFE] Windows 2022 support - 1975720 [RFE] Huge VMs require an additional migration parameter - 1979277 [RFE] Migration - Apply automatic CPU and NUMA pinning based on the migrated host - 1986775 [RFE] introduce support for CentOS Stream 9 on oVirt releases - 1990462 [RFE] Add user name and password to ELK integration - 1838089 [RFE] Please allow placing domain in maintenance mode with suspended VM - 1913389 [CBT] [RFE] Provide VDSM with more information on scratch disks Some of the Bugs with high user impact are listed below: - 1986732 ovirt-ha services cannot set the LocalMaintenance mode in the storage metadata and are in a restart loop - 2035051 removing nfs-utils cause ovirt-engine removal due to cinderlib dep tree - 2054745 Setting SD to maintenance fails and turns the SD to inactive mode as a result - 1878724 vdsm-tool configure is failing with error ”dependency job for libvirtd.service failed” - 2024698 build failure in copr - 2057958 oVirt Node 4.5 el9 iso doesn’t boot anymore - 2043146 Expired /etc/pki/vdsm/libvirt-vnc/server-cert.pem certificate is skipped during Enroll Certificate - 2040402 unable to use --log-size=0 option - 1932149 [blocked] Create hosted_storage with the correct storage_format based on the Data-Center level of the backup - 2066285 Copying from an Image domain to a Managed Block Storage domain fails - 1986485 otopi uses deprecated API platform.linux_distribution which has been removed in Python 3.7 and later. - 1986728 ovirt-log-collector uses deprecated API platform.linux_distribution which has been removed in Python 3.7 and later. - 2066628 [UI] UI exception when updating or enabling number of VFs via the webadmin - 1986731 ovirt-engine uses deprecated API platform.linux_distribution which has been removed in Python 3.7 and later. - 2024161 Penalizing score by 1000 due to cpu load is not canceled after load decreasing to 0 - 2019869 Local disk is not bootable when the VM is imported from OVA - 1857815 Copying HE-VM's disk to iSCSI storage volume, during deployment of 4.4 HE takes too long. - 2065152 Implicit CPU pinning for NUMA VMs destroyed because of invalid CPU policy - 2069658 Unable to deploy HE, couldn't resolve module/action 'firewalld'. - 2070184 Hybrid Backup - Specifying disks for backup doesn’t work, backup is created for all disks oVirt Node has been updated, including: - oVirt 4.5.0 beta: https://www.ovirt.org/release/4.5.0/ - GlusterFS 10.1: https://docs.gluster.org/en/main/release-notes/10.1/ - RDO OpenStack Yoga pre-release: https://releases.openstack.org/yoga/index.html - OVS 2.15 - Ansible Core 2.12.3: https://github.com/ansible/ansible/blob/stable-2.12/changelogs/CHANGELOG-v2… - CentOS Stream 8 latest updates - Full list of changes compared to oVirt Node 4.5.0 Alpha: ovirt-node-ng-image-4.5.0_alpha ovirt-node-ng-image-4.5.0_beta NetworkManager 1.36.0-2.el8 1.37.2-1.el8 NetworkManager-config-server 1.36.0-2.el8 1.37.2-1.el8 NetworkManager-libnm 1.36.0-2.el8 1.37.2-1.el8 NetworkManager-ovs 1.36.0-2.el8 1.37.2-1.el8 NetworkManager-team 1.36.0-2.el8 1.37.2-1.el8 NetworkManager-tui 1.36.0-2.el8 1.37.2-1.el8 ansible 2.9.27-2.el8 ansible-collection-ansible-netcommon 2.2.0-3.2.el8 ansible-collection-ansible-posix 1.3.0-1.2.el8 ansible-collection-ansible-utils 2.3.0-2.2.el8 ansible-core 2.12.3-1.el8 audispd-plugins 3.0.7-2.el8 3.0.7-3.el8 audit 3.0.7-2.el8 3.0.7-3.el8 audit-libs 3.0.7-2.el8 3.0.7-3.el8 centos-gpg-keys 8-4.el8 8-6.el8 centos-release-gluster10 1.0-1.el8s centos-release-ovirt45 8.6-1.el8 8.6-3.el8s centos-stream-repos 8-4.el8 8-6.el8 cockpit-ovirt-dashboard 0.15.1-1.el8 0.16.0-1.el8 dmidecode 3.3-1.el8 3.3-4.el8 dnf 4.7.0-7.el8 4.7.0-8.el8 dnf-data 4.7.0-7.el8 4.7.0-8.el8 dnf-plugins-core 4.0.21-10.el8 4.0.21-11.el8 emacs-filesystem 26.1-7.el8 expat 2.2.5-5.el8 2.2.5-8.el8 gdisk 1.0.3-8.el8 1.0.3-9.el8 git 2.31.1-2.el8 git-core-doc 2.31.1-2.el8 glibc 2.28-189.el8 2.28-196.el8 glibc-common 2.28-189.el8 2.28-196.el8 glibc-langpack-en 2.28-189.el8 2.28-196.el8 gluster-ansible-cluster 1.0.1-2.el8 1.0-4.el8 gluster-ansible-features 1.0.5-6.el8 1.0.5-12.el8 gluster-ansible-infra 1.0.4-15.el8 1.0.4-20.el8 gluster-ansible-maintenance 1.0.1-10.el8 1.0.1-12.el8 gluster-ansible-repositories 1.0.1-3.el8 1.0.1-5.el8 gluster-ansible-roles 1.0.5-21.el8 1.0.5-26.el8 ipa-client 4.9.8-2.module_el8.6.0+1054+cdb51b28 4.9.8-6.module_el8.6.0+1104+ba556574 ipa-client-common 4.9.8-2.module_el8.6.0+1054+cdb51b28 4.9.8-6.module_el8.6.0+1104+ba556574 ipa-common 4.9.8-2.module_el8.6.0+1054+cdb51b28 4.9.8-6.module_el8.6.0+1104+ba556574 ipa-selinux 4.9.8-2.module_el8.6.0+1054+cdb51b28 4.9.8-6.module_el8.6.0+1104+ba556574 iproute 5.15.0-3.el8 5.15.0-4.el8 iproute-tc 5.15.0-3.el8 5.15.0-4.el8 iputils 20180629-9.el8 20180629-10.el8 kernel 4.18.0-365.el8 4.18.0-373.el8 kernel-core 4.18.0-365.el8 4.18.0-373.el8 kernel-modules 4.18.0-365.el8 4.18.0-373.el8 kernel-tools 4.18.0-365.el8 4.18.0-373.el8 kernel-tools-libs 4.18.0-365.el8 4.18.0-373.el8 libbabeltrace 1.5.4-3.el8 1.5.4-4.el8 libblkid 2.32.1-34.el8 2.32.1-35.el8 libdnf 0.63.0-7.el8 0.63.0-8.el8 libfdisk 2.32.1-34.el8 2.32.1-35.el8 libipa_hbac 2.6.1-2.el8 2.6.2-3.el8 libmount 2.32.1-34.el8 2.32.1-35.el8 libnfsidmap 2.3.3-50.el8 2.3.3-51.el8 libsmartcols 2.32.1-34.el8 2.32.1-35.el8 libsss_autofs 2.6.1-2.el8 2.6.2-3.el8 libsss_certmap 2.6.1-2.el8 2.6.2-3.el8 libsss_idmap 2.6.1-2.el8 2.6.2-3.el8 libsss_nss_idmap 2.6.1-2.el8 2.6.2-3.el8 libsss_simpleifp 2.6.1-2.el8 2.6.2-3.el8 libsss_sudo 2.6.1-2.el8 2.6.2-3.el8 libuuid 2.32.1-34.el8 2.32.1-35.el8 libwbclient 4.15.5-4.el8 4.15.5-5.el8 nfs-utils 2.3.3-50.el8 2.3.3-51.el8 nmstate 1.2.1-1.el8 1.3.0-0.alpha.20220310.el8 nmstate-plugin-ovsdb 1.2.1-1.el8 1.3.0-0.alpha.20220310.el8 openssl 1.1.1k-5.el8_5 1.1.1k-6.el8 openssl-libs 1.1.1k-5.el8_5 1.1.1k-6.el8 ovirt-ansible-collection 2.0.0-0.6.BETA.el8 2.0.1-1.el8 ovirt-host 4.5.0-1.el8 4.5.0-2.el8 ovirt-host-dependencies 4.5.0-1.el8 4.5.0-2.el8 ovirt-hosted-engine-setup 2.6.1-1.el8 2.6.3-1.el8 ovirt-imageio-client 2.4.1-1.el8 2.4.3-1.el8 ovirt-imageio-common 2.4.1-1.el8 2.4.3-1.el8 ovirt-imageio-daemon 2.4.1-1.el8 2.4.3-1.el8 ovirt-node-ng-image-update-placeholder 4.5.0-2.el8 4.5.0-3.el8 ovirt-node-ng-nodectl 4.4.1-1.el8 4.4.2-1.el8 ovirt-release-host-node 4.5.0-2.el8 4.5.0-3.el8 perl-Error 0.17025-2.el8 perl-Git 2.31.1-2.el8 perl-TermReadKey 2.37-7.el8 platform-python 3.6.8-45.el8 3.6.8-46.el8 procps-ng 3.3.15-6.el8 3.3.15-7.el8 python3-audit 3.0.7-2.el8 3.0.7-3.el8 python3-click 6.7-8.el8 python3-daemon 2.2.4-3.el8 2.2.4-3.2.el8 python3-dnf 4.7.0-7.el8 4.7.0-8.el8 python3-dnf-plugin-versionlock 4.0.21-10.el8 4.0.21-11.el8 python3-dnf-plugins-core 4.0.21-10.el8 4.0.21-11.el8 python3-docutils 0.14-12.module_el8.5.0+761+faacb0fb 0.14-12.2.el8 python3-hawkey 0.63.0-7.el8 0.63.0-8.el8 python3-ipaclient 4.9.8-2.module_el8.6.0+1054+cdb51b28 4.9.8-6.module_el8.6.0+1104+ba556574 python3-ipalib 4.9.8-2.module_el8.6.0+1054+cdb51b28 4.9.8-6.module_el8.6.0+1104+ba556574 python3-jmespath 0.9.0-11.el8 0.9.0-11.1.el8 python3-libdnf 0.63.0-7.el8 0.63.0-8.el8 python3-libipa_hbac 2.6.1-2.el8 2.6.2-3.el8 python3-libnmstate 1.2.1-1.el8 1.3.0-0.alpha.20220310.el8 python3-libs 3.6.8-45.el8 3.6.8-46.el8 python3-lockfile 0.12.2-1.el8 0.12.2-1.2.el8 python3-netaddr 0.7.19-8.el8 0.7.19-8.1.1.el8 python3-ovirt-engine-sdk4 4.5.0-1.el8 4.5.1-1.el8 python3-ovirt-node-ng-nodectl 4.4.1-1.el8 4.4.2-1.el8 python3-pbr 5.5.1-1.el8 5.5.1-7.2.el8 python3-perf 4.18.0-365.el8 4.18.0-373.el8 python3-pexpect 4.7.0-4.el8 4.7.0-4.3.el8 python3-ptyprocess 0.5.2-4.el8 0.5.2-4.2.el8 python3-pycurl 7.43.0.2-4.el8 7.43.0.2-4.1.el8 python3-sss 2.6.1-2.el8 2.6.2-3.el8 python3-sss-murmur 2.6.1-2.el8 2.6.2-3.el8 python3-sssdconfig 2.6.1-2.el8 2.6.2-3.el8 python3-syspurpose 1.28.25-1.el8 1.28.28-1.el8 python3-tenacity 6.2.0-1.el8 6.3.1-1.el8 python38 3.8.12-1.module_el8.6.0+929+89303463 python38-asn1crypto 1.2.0-3.module_el8.5.0+742+dbad1979 python38-babel 2.7.0-11.module_el8.6.0+929+89303463 python38-cffi 1.13.2-3.module_el8.5.0+742+dbad1979 python38-cryptography 2.8-3.module_el8.5.0+742+dbad1979 python38-idna 2.8-6.module_el8.5.0+742+dbad1979 python38-jinja2 2.10.3-5.module_el8.6.0+929+89303463 python38-jmespath 0.9.0-11.1.el8 python38-libs 3.8.12-1.module_el8.6.0+929+89303463 python38-markupsafe 1.1.1-6.module_el8.5.0+742+dbad1979 python38-netaddr 0.7.19-8.1.1.el8 python38-ovirt-engine-sdk4 4.5.1-1.el8 python38-ovirt-imageio-client 2.4.3-1.el8 python38-ovirt-imageio-common 2.4.3-1.el8 python38-passlib 1.7.0-5.1.el8 python38-pip-wheel 19.3.1-5.module_el8.6.0+960+f11a9b17 python38-ply 3.11-10.module_el8.5.0+742+dbad1979 python38-pycparser 2.19-3.module_el8.5.0+742+dbad1979 python38-pycurl 7.43.0.2-4.1.el8 python38-pytz 2019.3-3.module_el8.5.0+742+dbad1979 python38-pyyaml 5.4.1-1.module_el8.6.0+929+89303463 python38-resolvelib 0.5.4-5.el8 python38-setuptools 41.6.0-5.module_el8.6.0+929+89303463 python38-setuptools-wheel 41.6.0-5.module_el8.6.0+929+89303463 python38-six 1.12.0-10.module_el8.5.0+742+dbad1979 rsyslog 8.2102.0-7.el8 8.2102.0-8.el8 rsyslog-elasticsearch 8.2102.0-7.el8 8.2102.0-8.el8 rsyslog-mmjsonparse 8.2102.0-7.el8 8.2102.0-8.el8 rsyslog-mmnormalize 8.2102.0-7.el8 8.2102.0-8.el8 rsyslog-openssl 8.2102.0-7.el8 8.2102.0-8.el8 samba-client-libs 4.15.5-4.el8 4.15.5-5.el8 samba-common 4.15.5-4.el8 4.15.5-5.el8 samba-common-libs 4.15.5-4.el8 4.15.5-5.el8 selinux-policy 3.14.3-93.el8 3.14.3-95.el8 selinux-policy-targeted 3.14.3-93.el8 3.14.3-95.el8 sssd-client 2.6.1-2.el8 2.6.2-3.el8 sssd-common 2.6.1-2.el8 2.6.2-3.el8 sssd-common-pac 2.6.1-2.el8 2.6.2-3.el8 sssd-dbus 2.6.1-2.el8 2.6.2-3.el8 sssd-ipa 2.6.1-2.el8 2.6.2-3.el8 sssd-kcm 2.6.1-2.el8 2.6.2-3.el8 sssd-krb5-common 2.6.1-2.el8 2.6.2-3.el8 sssd-tools 2.6.1-2.el8 2.6.2-3.el8 tzdata 2021e-1.el8 2022a-1.el8 util-linux 2.32.1-34.el8 2.32.1-35.el8 vdsm 4.50.0.10-1.el8 4.50.0.11-1.el8 vdsm-api 4.50.0.10-1.el8 4.50.0.11-1.el8 vdsm-client 4.50.0.10-1.el8 4.50.0.11-1.el8 vdsm-common 4.50.0.10-1.el8 4.50.0.11-1.el8 vdsm-gluster 4.50.0.10-1.el8 4.50.0.11-1.el8 vdsm-http 4.50.0.10-1.el8 4.50.0.11-1.el8 vdsm-jsonrpc 4.50.0.10-1.el8 4.50.0.11-1.el8 vdsm-network 4.50.0.10-1.el8 4.50.0.11-1.el8 vdsm-python 4.50.0.10-1.el8 4.50.0.11-1.el8 vdsm-yajsonrpc 4.50.0.10-1.el8 4.50.0.11-1.el8 virt-install 3.2.0-3.el8 3.2.0-4.el8 virt-manager-common 3.2.0-3.el8 3.2.0-4.el8 yum 4.7.0-7.el8 4.7.0-8.el8 oVirt Appliance has been updated, including: - oVirt 4.5.0 beta: https://www.ovirt.org/release/4.5.0/ - GlusterFS 10.1: https://docs.gluster.org/en/main/release-notes/10.1/ - RDO OpenStack Yoga pre-release: https://releases.openstack.org/yoga/index.html - OVS 2.15 - Ansible Core 2.12.3: https://github.com/ansible/ansible/blob/stable-2.12/changelogs/CHANGELOG-v2… - CentOS Stream 8 latest updates - Full list of changes compared to oVirt Appliance 4.5.0 Alpha: ovirt-engine-appliance-manifest-rpm-el8.4.5.0_alpha ovirt-engine-appliance-manifest-rpm-el8.4.5.0_beta NetworkManager 1.36.0-2.el8 1.37.2-1.el8 NetworkManager-libnm 1.36.0-2.el8 1.37.2-1.el8 NetworkManager-team 1.36.0-2.el8 1.37.2-1.el8 NetworkManager-tui 1.36.0-2.el8 1.37.2-1.el8 ansible 2.9.27-2.el8 ansible-collection-ansible-netcommon 2.2.0-3.2.el8 ansible-collection-ansible-posix 1.3.0-1.2.el8 ansible-collection-ansible-utils 2.3.0-2.2.el8 ansible-core 2.12.3-1.el8 ansible-runner 2.1.3-1.el8 ansible-runner-service 1.0.7-1.el8 audit 3.0.7-2.el8 3.0.7-3.el8 audit-libs 3.0.7-2.el8 3.0.7-3.el8 centos-gpg-keys 8-4.el8 8-6.el8 centos-release-gluster10 1.0-1.el8s centos-release-ovirt45 8.6-1.el8s 8.6-3.el8s centos-stream-repos 8-4.el8 8-6.el8 dmidecode 3.3-1.el8 3.3-4.el8 dnf 4.7.0-7.el8 4.7.0-8.el8 dnf-data 4.7.0-7.el8 4.7.0-8.el8 dnf-plugins-core 4.0.21-10.el8 4.0.21-11.el8 expat 2.2.5-5.el8 2.2.5-8.el8 gdisk 1.0.3-8.el8 1.0.3-9.el8 git 2.31.1-2.el8 git-core-doc 2.31.1-2.el8 glibc 2.28-189.el8 2.28-196.el8 glibc-common 2.28-189.el8 2.28-196.el8 glibc-gconv-extra 2.28-189.el8 2.28-196.el8 glibc-langpack-en 2.28-189.el8 2.28-196.el8 iproute 5.15.0-3.el8 5.15.0-4.el8 iputils 20180629-9.el8 20180629-10.el8 java-1.8.0-openjdk-headless 1.8.0.322.b06-2.el8_5 1.8.0.322.b06-11.el8 java-11-openjdk-headless 11.0.14.0.9-2.el8_5 11.0.14.1.1-6.el8 kernel 4.18.0-365.el8 4.18.0-373.el8 kernel-core 4.18.0-365.el8 4.18.0-373.el8 kernel-modules 4.18.0-365.el8 4.18.0-373.el8 kernel-tools 4.18.0-365.el8 4.18.0-373.el8 kernel-tools-libs 4.18.0-365.el8 4.18.0-373.el8 libbabeltrace 1.5.4-3.el8 1.5.4-4.el8 libblkid 2.32.1-34.el8 2.32.1-35.el8 libdnf 0.63.0-7.el8 0.63.0-8.el8 libfdisk 2.32.1-34.el8 2.32.1-35.el8 libmount 2.32.1-34.el8 2.32.1-35.el8 libnfsidmap 2.3.3-50.el8 2.3.3-51.el8 libqb 1.0.3-12.el8 libsmartcols 2.32.1-34.el8 2.32.1-35.el8 libsss_certmap 2.6.1-2.el8 2.6.2-3.el8 libsss_idmap 2.6.1-2.el8 2.6.2-3.el8 libsss_nss_idmap 2.6.1-2.el8 2.6.2-3.el8 libuuid 2.32.1-34.el8 2.32.1-35.el8 nfs-utils 2.3.3-50.el8 2.3.3-51.el8 nodejs 10.23.1-1.module_el8.4.0+645+9ce14ba2 14.17.5-1.module_el8.6.0+939+4802ccb9 nodejs-docs 14.17.5-1.module_el8.6.0+939+4802ccb9 nodejs-full-i18n 10.23.1-1.module_el8.4.0+645+9ce14ba2 14.17.5-1.module_el8.6.0+939+4802ccb9 npm 6.14.10-1.10.23.1.1.module_el8.4.0+645+9ce14ba2 6.14.14-1.14.17.5.1.module_el8.6.0+939+4802ccb9 openssl 1.1.1k-5.el8_5 1.1.1k-6.el8 openssl-libs 1.1.1k-5.el8_5 1.1.1k-6.el8 openstack-java-cinder-client 3.2.9-1.el8 3.2.9-9.el8 openstack-java-cinder-model 3.2.9-1.el8 3.2.9-9.el8 openstack-java-client 3.2.9-1.el8 3.2.9-9.el8 openstack-java-glance-client 3.2.9-1.el8 3.2.9-9.el8 openstack-java-glance-model 3.2.9-1.el8 3.2.9-9.el8 openstack-java-keystone-client 3.2.9-1.el8 3.2.9-9.el8 openstack-java-keystone-model 3.2.9-1.el8 3.2.9-9.el8 openstack-java-quantum-client 3.2.9-1.el8 3.2.9-9.el8 openstack-java-quantum-model 3.2.9-1.el8 3.2.9-9.el8 openstack-java-resteasy-connector 3.2.9-1.el8 3.2.9-9.el8 ovirt-ansible-collection 2.0.0-0.6.BETA.el8 2.0.1-1.el8 ovirt-engine 4.5.0-1.el8 4.5.0.1-1.el8 ovirt-engine-backend 4.5.0-1.el8 4.5.0.1-1.el8 ovirt-engine-dbscripts 4.5.0-1.el8 4.5.0.1-1.el8 ovirt-engine-dwh 4.5.0-1.el8 4.5.2-1.el8 ovirt-engine-dwh-grafana-integration-setup 4.5.0-1.el8 4.5.2-1.el8 ovirt-engine-dwh-setup 4.5.0-1.el8 4.5.2-1.el8 ovirt-engine-keycloak-setup 15.0.2-1.el8 ovirt-engine-metrics 1.4.4-1.el8 1.6.0-1.el8 ovirt-engine-restapi 4.5.0-1.el8 4.5.0.1-1.el8 ovirt-engine-setup 4.5.0-1.el8 4.5.0.1-1.el8 ovirt-engine-setup-base 4.5.0-1.el8 4.5.0.1-1.el8 ovirt-engine-setup-plugin-cinderlib 4.5.0-1.el8 4.5.0.1-1.el8 ovirt-engine-setup-plugin-imageio 4.5.0-1.el8 4.5.0.1-1.el8 ovirt-engine-setup-plugin-ovirt-engine 4.5.0-1.el8 4.5.0.1-1.el8 ovirt-engine-setup-plugin-ovirt-engine-common 4.5.0-1.el8 4.5.0.1-1.el8 ovirt-engine-setup-plugin-vmconsole-proxy-helper 4.5.0-1.el8 4.5.0.1-1.el8 ovirt-engine-setup-plugin-websocket-proxy 4.5.0-1.el8 4.5.0.1-1.el8 ovirt-engine-tools 4.5.0-1.el8 4.5.0.1-1.el8 ovirt-engine-tools-backup 4.5.0-1.el8 4.5.0.1-1.el8 ovirt-engine-ui-extensions 1.3.1-1.el8 1.3.2-1.el8 ovirt-engine-vmconsole-proxy-helper 4.5.0-1.el8 4.5.0.1-1.el8 ovirt-engine-webadmin-portal 4.5.0-1.el8 4.5.0.1-1.el8 ovirt-engine-websocket-proxy 4.5.0-1.el8 4.5.0.1-1.el8 ovirt-imageio-client 2.4.1-1.el8 2.4.3-1.el8 ovirt-imageio-common 2.4.1-1.el8 2.4.3-1.el8 ovirt-imageio-daemon 2.4.1-1.el8 2.4.3-1.el8 ovirt-web-ui 1.8.0-1.el8 1.8.1-1.el8 perl-Error 0.17025-2.el8 perl-Git 2.31.1-2.el8 perl-TermReadKey 2.37-7.el8 platform-python 3.6.8-45.el8 3.6.8-46.el8 platform-python-devel 3.6.8-45.el8 3.6.8-46.el8 procps-ng 3.3.15-6.el8 3.3.15-7.el8 protobuf 3.11.2-2.el8 python3-aniso8601 8.1.0-1.el8 python3-ansible-runner 1.4.6-3.el8 python3-audit 3.0.7-2.el8 3.0.7-3.el8 python3-click 6.7-8.el8 python3-daemon 2.2.4-3.el8 2.2.4-3.2.el8 python3-dataclasses 0.8-1.el8 python3-dnf 4.7.0-7.el8 4.7.0-8.el8 python3-dnf-plugin-versionlock 4.0.21-10.el8 4.0.21-11.el8 python3-dnf-plugins-core 4.0.21-10.el8 4.0.21-11.el8 python3-docutils 0.14-12.module_el8.5.0+761+faacb0fb 0.14-12.2.el8 python3-flask 1.1.2-4.el8 python3-flask-restful 0.3.9-2.el8 python3-hawkey 0.63.0-7.el8 0.63.0-8.el8 python3-itsdangerous 0.24-14.el8 python3-jmespath 0.9.0-11.el8 0.9.0-11.1.el8 python3-libdnf 0.63.0-7.el8 0.63.0-8.el8 python3-libs 3.6.8-45.el8 3.6.8-46.el8 python3-lockfile 0.12.2-1.el8 0.12.2-1.2.el8 python3-mod_wsgi 4.6.4-4.el8 python3-netaddr 0.7.19-8.el8 0.7.19-8.1.1.el8 python3-notario 0.0.16-4.el8 python3-ntlm-auth 1.5.0-1.el8 python3-ovirt-engine-lib 4.5.0-1.el8 4.5.0.1-1.el8 python3-ovirt-engine-sdk4 4.5.0-1.el8 4.5.1-1.el8 python3-paramiko 2.7.2-2.el8 2.7.2-3.el8 python3-pbr 5.5.1-1.el8 5.5.1-7.2.el8 python3-perf 4.18.0-365.el8 4.18.0-373.el8 python3-pexpect 4.7.0-4.el8 python3-psycopg2 2.7.5-7.el8 2.8.6-3.el8 python3-ptyprocess 0.5.2-4.el8 python3-pycurl 7.43.0.2-4.el8 7.43.0.2-4.1.el8 python3-requests_ntlm 1.1.0-9.el8 python3-sqlalchemy 1.4.18-1.1.el8 1.4.31-1.el8 python3-syspurpose 1.28.25-1.el8 1.28.28-1.el8 python3-tenacity 6.2.0-1.el8 6.3.1-1.el8 python3-tkinter 3.6.8-45.el8 3.6.8-46.el8 python3-werkzeug 2.0.1-2.el8 python3-winrm 0.4.1-1.el8 python3-xmltodict 0.12.0-6.el8 python38 3.8.12-1.module_el8.6.0+929+89303463 python38-ansible-runner 2.1.3-1.el8 python38-asn1crypto 1.2.0-3.module_el8.5.0+742+dbad1979 python38-babel 2.7.0-11.module_el8.6.0+929+89303463 python38-cffi 1.13.2-3.module_el8.5.0+742+dbad1979 python38-cryptography 2.8-3.module_el8.5.0+742+dbad1979 python38-daemon 2.2.4-3.2.el8 python38-docutils 0.14-12.2.el8 python38-idna 2.8-6.module_el8.5.0+742+dbad1979 python38-jinja2 2.10.3-5.module_el8.6.0+929+89303463 python38-jmespath 0.9.0-11.1.el8 python38-libs 3.8.12-1.module_el8.6.0+929+89303463 python38-lockfile 0.12.2-1.2.el8 python38-markupsafe 1.1.1-6.module_el8.5.0+742+dbad1979 python38-netaddr 0.7.19-8.1.1.el8 python38-ovirt-engine-sdk4 4.5.1-1.el8 python38-ovirt-imageio-client 2.4.3-1.el8 python38-ovirt-imageio-common 2.4.3-1.el8 python38-passlib 1.7.0-5.1.el8 python38-pexpect 4.7.0-4.3.el8 python38-pip 19.3.1-5.module_el8.6.0+960+f11a9b17 python38-pip-wheel 19.3.1-5.module_el8.6.0+960+f11a9b17 python38-ply 3.11-10.module_el8.5.0+742+dbad1979 python38-ptyprocess 0.5.2-4.2.el8 python38-pycparser 2.19-3.module_el8.5.0+742+dbad1979 python38-pycurl 7.43.0.2-4.1.el8 python38-pytz 2019.3-3.module_el8.5.0+742+dbad1979 python38-pyyaml 5.4.1-1.module_el8.6.0+929+89303463 python38-resolvelib 0.5.4-5.el8 python38-setuptools 41.6.0-5.module_el8.6.0+929+89303463 python38-setuptools-wheel 41.6.0-5.module_el8.6.0+929+89303463 python38-six 1.12.0-10.module_el8.5.0+742+dbad1979 python38-tkinter 3.8.12-1.module_el8.6.0+929+89303463 rhel-system-roles 1.15.1-1.el8 1.16.1-1.el8 rng-tools 6.14-4.git.b2b7934e.el8 rsyslog 8.2102.0-7.el8 8.2102.0-8.el8 rsyslog-elasticsearch 8.2102.0-7.el8 8.2102.0-8.el8 rsyslog-gnutls 8.2102.0-8.el8 rsyslog-mmjsonparse 8.2102.0-7.el8 8.2102.0-8.el8 rsyslog-mmnormalize 8.2102.0-7.el8 8.2102.0-8.el8 selinux-policy 3.14.3-93.el8 3.14.3-95.el8 selinux-policy-targeted 3.14.3-93.el8 3.14.3-95.el8 sssd-client 2.6.1-2.el8 2.6.2-3.el8 sssd-common 2.6.1-2.el8 2.6.2-3.el8 sssd-kcm 2.6.1-2.el8 2.6.2-3.el8 tzdata 2021e-1.el8 2022a-1.el8 tzdata-java 2021e-1.el8 2022a-1.el8 usbguard 1.0.0-9.el8 usbguard-selinux 1.0.0-9.el8 util-linux 2.32.1-34.el8 2.32.1-35.el8 yum 4.7.0-7.el8 4.7.0-8.el8 yum-utils 4.0.21-10.el8 4.0.21-11.el8 See the release notes for installation instructions and a list of new features and bugs fixed. Additional resources: - Read more about the oVirt 4.5.0 release highlights: https://www.ovirt.org/release/4.5.0/ - Get more oVirt project updates on Twitter: https://twitter.com/ovirt - Check out the latest project news on the oVirt blog: https://blogs.ovirt.org/ oVirt 4.5.0 Beta test day - April 7th 2022 If you're willing to help testing the release during the test days please join the oVirt development mailing list at https://lists.ovirt.org/archives/list/devel@ovirt.org/ and report your feedback there. Please join the trello board at https://trello.com/b/3FZ7gdhM/ovirt-450-test-day for sharing what you're going to test so others can focus on different areas not covered by your test. If you don't want to register to trello, please share on the oVirt development mailing list and we'll add it to the board. The board is publicly visible also to non-registered users. Instructions for installing oVirt 4.5.0 Beta for testing have been added to the release page https://www.ovirt.org/release/4.5.0/. Professional Services, Integrators and Backup vendors: please run a test session against your additional services, integrated solutions, downstream rebuilds, backup solution on the released beta release and report issues as soon as possible. If you're not listed here: https://ovirt.org/community/user-stories/users-and-providers.html consider adding your company there. Do you want to contribute to getting ready for this release? Read more about oVirt community at https://ovirt.org/community/ and join the oVirt developers https://ovirt.org/develop/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

2 5

ovirt-engine has been tagged (ovirt-engine-4.5.0.1)
by Sandro Bonazzola 06 Apr '22

06 Apr '22

ovirt-engine has been tagged (ovirt-engine-4.5.0.1) copr build running at https://copr.fedorainfracloud.org/coprs/ovirt/ovirt-master-snapshot/build/4… -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 0

oVirt Engine now requires ansible-core >= 2.12 and ansible-runner >= 2.0
by Martin Perina 05 Apr '22

05 Apr '22

Hi, yesterday we have merged a global change in the whole oVirt, from now on we require ansible-core >= 2.12 for oVirt functionality. It means that upcoming oVirt 4.5 will work only on OS version where ansible-core-2.12 is properly packages (for example CentOS Stream 8 and upcoming RHEL 8.6). All required package changes should be performed automatically for RPM installations. But developers will need to upgrade packages in their development environments manually, the most significant change is visible in for ovirt-engine. If you already have a working development environment setup, please perform following upgrade steps: 1. Update your packages, especially ovirt-release-master https://copr.fedorainfracloud.org/coprs/ovirt/ovirt-master-snapshot/ 2. Remove old ansible and ansible-runner-service-dev dnf remove ansible ansible-runner-service-dev 3. Install ansible-core and ansible-runner dnf install ansible-core ansible-runner ovirt-ansible-collection Detailed information how to set up an engine development environment can be found at https://github.com/oVirt/ovirt-engine/blob/master/README.adoc If anything doesn't work, please let us know. Thanks, Martin -- Martin Perina Manager, Software Engineering Red Hat Czech s.r.o.

2 1

Alpha 4.5 Test Day | Deploy on Ceph Storage
by Jöran Malek 05 Apr '22

05 Apr '22

I tried deploying oVirt 4.5 Alpha (using the oVirt Node NG master installer ISO for el8) with converged Ceph using following steps: * Install two oVirt Node-nodes * Install cephadm on both, single 240GB OSD per node (this is a nested virtualization test environment) * Deploy ceph cluster with cephadm --skip-monitoring-stack --single-host-defaults * Added OSDs to Ceph * Created CephFS with "ceph fs volume create cephfs" * Deployed NFS ganesha using ceph orch apply * Added export "/ovirt" to NFS ganesha for CephFS "/", mounted CephFS temporarily, changing its owner to 36:36 * Added RBD Pool "ovirt" At this point: Ceph is running, CephFS is working, NFS exports are available. Performed the usual ovirt-hosted-engine-setup, answers file attached. Hosted Engine: Check, on NFS storage domain over Ceph (not doing the iSCSI route as that is a black box to me). NFS "just works", and I can connect to localhost as server, making it the perfect candidate for HA storage (because NFS is deployed on every node in the Cluster, due to Ceph being installed on every node in the cluster) Copied over the ceph.conf and ceph.client.admin.keyring to engine-VM, and changed their owner to ovirt. Applied cinderlib integration on Engine with > engine-setup --reconfigure-optional-components Added a block storage domain (configuration as in the blog post), and getting following error, as attached (engine.log, cinderlib.log). German: Fehler beim Ausführen der Aktion: Kann Speicher nicht hinzufügen. Verbinden mit verwalteter Blockdomäne fehlgeschlagen. English (translated): Error while performing action: Unable to add storage. Failed to connect to managed block storage domain. Anything I can provide that helps figuring this out? Ceph Version: 16.2.7 (dd0603118f56ab514f133c8d2e3adfc983942503) pacific (stable) For the Trello-board: Installation on Ceph works as expected - iSCSI and NFS are well-supported, and deployment with NFS is a bit easier than iSCSI. Adding a managed block storage domain failed for me, works on oVirt 4.4 with the exact same procedure. Best, Jöran

6 21

Updated invitation: oVirt 4.5.0 Beta release test day @ Thu Apr 7, 2022 (devel@ovirt.org)
by sbonazzo＠redhat.com 04 Apr '22

04 Apr '22

This event has been changed. Title: oVirt 4.5.0 Beta release test day If you're willing to help testing the release during the test daysplease join the oVirt development mailing list athttps://lists.ovirt.org/archives/list/devel@ovirt.org/ and report yourfeedback there.Instructions for installing oVirt 4.5.0 Beta fortesting have been added to the release pagehttps://www.ovirt.org/release/4.5.0/ Re-scheduled due to beta delay When: Thu Apr 7, 2022 (changed) Calendar: devel(a)ovirt.org Who: (Guest list has been hidden at organizer's request) Event details: https://calendar.google.com/calendar/event?action=VIEW&eid=MXZpZGdobjViaHQz… Invitation from Google Calendar: https://calendar.google.com/calendar/ You are receiving this courtesy email at the account devel(a)ovirt.org because you are an attendee of this event. To stop receiving future updates for this event, decline this event. Alternatively you can sign up for a Google account at https://calendar.google.com/calendar/ and control your notification settings for your entire calendar. Forwarding this invitation could allow any recipient to send a response to the organizer and be added to the guest list, or invite others regardless of their own invitation status, or to modify your RSVP. Learn more at https://support.google.com/calendar/answer/37135#forwarding

1 0

Updated invitation: oVirt 4.5.0 Beta compose starts @ Wed Apr 6, 2022 09:00 - 09:50 (CEST) (devel@ovirt.org)
by sbonazzo＠redhat.com 04 Apr '22

04 Apr '22

This event has been changed. Title: oVirt 4.5.0 Beta compose starts This is a placeholder to remind about oVirt 4.5.0 beta compose starting 17:00 CEST.Packages that are not ready by this time are likely to miss to be included in the release.Postponed due to some packages still not built, partially due to CentOS Stream 8 bug https://bugzilla.redhat.com/show_bug.cgi?id=2069547 .Postponed to April 4th due to ovirt-engine and gluster-ansible-roles not yet ready for ansible-core 2.12 When: Wed Apr 6, 2022 09:00 – 09:50 Central European Time - Rome (changed) Calendar: devel(a)ovirt.org Who: (Guest list has been hidden at organizer's request) Event details: https://calendar.google.com/calendar/event?action=VIEW&eid=Nmtnb3JtbjVqOW9j… Invitation from Google Calendar: https://calendar.google.com/calendar/ You are receiving this courtesy email at the account devel(a)ovirt.org because you are an attendee of this event. To stop receiving future updates for this event, decline this event. Alternatively you can sign up for a Google account at https://calendar.google.com/calendar/ and control your notification settings for your entire calendar. Forwarding this invitation could allow any recipient to send a response to the organizer and be added to the guest list, or invite others regardless of their own invitation status, or to modify your RSVP. Learn more at https://support.google.com/calendar/answer/37135#forwarding

1 0

Re: [ovirt-users] Re: [=EXTERNAL=] Re: help using nvme/tcp storage with cinderlib and Managed Block Storage
by Nir Soffer 31 Mar '22

31 Mar '22

On Wed, Feb 23, 2022 at 6:24 PM Muli Ben-Yehuda <muli(a)lightbitslabs.com> wrote: > > Thanks for the detailed instructions, Nir. I'm going to scrounge up some hardware. > By the way, if anyone else would like to work on NVMe/TCP support, for NVMe/TCP target you can either use Lightbits (talk to me offline for details) or use the upstream Linux NVMe/TCP target. Lightbits is a clustered storage system while upstream is a single target, but the client side should be close enough for vdsm/ovirt purposes. I played with NVMe/TCP a little bit, using qemu to create a virtual NVMe disk, and export it using the kernel on one VM, and consume it on another VM. https://futurewei-cloud.github.io/ARM-Datacenter/qemu/nvme-of-tcp-vms/ One question about device naming - do we always get the same name of the device in all hosts? To support VM migration, every device must have unique name in the cluster. With multipath we always have unique name, since we disable "friendly names", so we always have: /dev/mapper/{wwid} With rbd we also do not use /dev/rbdN but a unique path: /dev/rbd/poolname/volume-vol-id How do we ensure cluster-unique device path? If os_brick does not handle it, we can to do in ovirt, for example: /run/vdsm/mangedvolumes/{uuid} -> /dev/nvme7n42 but I think this should be handled in cinderlib, since openstack have the same problem with migration. Nir > > Cheers, > Muli > -- > Muli Ben-Yehuda > Co-Founder and Chief Scientist @ http://www.lightbitslabs.com > LightOS: The Special Storage Sauce For Your Cloud > > > On Wed, Feb 23, 2022 at 4:55 PM Nir Soffer <nsoffer(a)redhat.com> wrote: >> >> On Wed, Feb 23, 2022 at 4:20 PM Muli Ben-Yehuda <muli(a)lightbitslabs.com> wrote: >> > >> > Thanks, Nir and Benny (nice to run into you again, Nir!). I'm a neophyte in ovirt and vdsm... What's the simplest way to set up a development environment? Is it possible to set up a "standalone" vdsm environment to hack support for nvme/tcp or do I need "full ovirt" to make it work? >> >> It should be possible to install vdsm on a single host or vm, and use vdsm >> API to bring the host to the right state, and then attach devices and run >> vms. But I don't know anyone that can pull this out since simulating what >> engine is doing is hard. >> >> So the best way is to set up at least one host and engine host using the >> latest 4.5 rpms, and continue from there. Once you have a host, building >> vdsm on the host and upgrading the rpms is pretty easy. >> >> My preferred setup is to create vms using virt-manager for hosts, engine >> and storage and run all the vms on my laptop. >> >> Note that you must have some traditional storage (NFS/iSCSI) to bring up >> the system even if you plan to use only managed block storage (MBS). >> Unfortunately when we add MBS support we did have time to fix the huge >> technical debt so you still need a master storage domain using one of the >> traditional legacy options. >> >> To build a setup, you can use: >> >> - engine vm: 6g ram, 2 cpus, centos stream 8 >> - hosts vm: 4g ram, 2 cpus, centos stream 8 >> you can start with one host and add more hosts later if you want to >> test migration. >> - storage vm: 2g ram, 2 cpus, any os you like, I use alpine since it >> takes very little >> memory and its NFS server is fast. >> >> See vdsm README for instructions how to setup a host: >> https://github.com/oVirt/vdsm#manual-installation >> >> For engine host you can follow: >> https://ovirt.org/documentation/installing_ovirt_as_a_self-hosted_engine_us… >> >> And after that this should work: >> >> dnf install ovirt-engine >> engine-setup >> >> Accepting all the defaults should work. >> >> When you have engine running, you can add a new host with >> the ip address or dns name of you host(s) vm, and engine will >> do everything for you. Note that you must install the ovirt-release-master >> rpm on the host before you add it to engine. >> >> Nir >> >> > >> > Cheers, >> > Muli >> > -- >> > Muli Ben-Yehuda >> > Co-Founder and Chief Scientist @ http://www.lightbitslabs.com >> > LightOS: The Special Storage Sauce For Your Cloud >> > >> > >> > On Wed, Feb 23, 2022 at 4:16 PM Nir Soffer <nsoffer(a)redhat.com> wrote: >> >> >> >> On Wed, Feb 23, 2022 at 2:48 PM Benny Zlotnik <bzlotnik(a)redhat.com> wrote: >> >> > >> >> > So I started looking in the logs and tried to follow along with the >> >> > code, but things didn't make sense and then I saw it's ovirt 4.3 which >> >> > makes things more complicated :) >> >> > Unfortunately because GUID is sent in the metadata the volume is >> >> > treated as a vdsm managed volume[2] for the udev rule generation and >> >> > it prepends the /dev/mapper prefix to an empty string as a result. >> >> > I don't have the vdsm logs, so I am not sure where exactly this fails, >> >> > but if it's after [4] it may be possible to workaround it with a vdsm >> >> > hook >> >> > >> >> > In 4.4.6 we moved the udev rule triggering the volume mapping phase, >> >> > before starting the VM. But it could still not work because we check >> >> > the driver_volume_type in[1], and I saw it's "driver_volume_type": >> >> > "lightos" for lightbits >> >> > In theory it looks like it wouldn't take much to add support for your >> >> > driver in a future release (as it's pretty late for 4.5) >> >> >> >> Adding support for nvme/tcp in 4.3 is probably not feasible, but we will >> >> be happy to accept patches for 4.5. >> >> >> >> To debug such issues vdsm log is the best place to check. We should see >> >> the connection info passed to vdsm, and we have pretty simple code using >> >> it with os_brick to attach the device to the system and setting up the udev >> >> rule (which may need some tweaks). >> >> >> >> Nir >> >> >> >> > [1] https://github.com/oVirt/vdsm/blob/500c035903dd35180d71c97791e0ce4356fb77ad… >> >> > >> >> > (4.3) >> >> > [2] https://github.com/oVirt/vdsm/blob/b42d4a816b538e00ea4955576a5fe762367be787… >> >> > [3] https://github.com/oVirt/vdsm/blob/b42d4a816b538e00ea4955576a5fe762367be787… >> >> > [4] https://github.com/oVirt/vdsm/blob/b42d4a816b538e00ea4955576a5fe762367be787… >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > On Wed, Feb 23, 2022 at 12:44 PM Muli Ben-Yehuda <muli(a)lightbitslabs.com> wrote: >> >> > > >> >> > > Certainly, thanks for your help! >> >> > > I put cinderlib and engine.log here: http://www.mulix.org/misc/ovirt-logs-20220223123641.tar.gz >> >> > > If you grep for 'mulivm1' you will see for example: >> >> > > >> >> > > 2022-02-22 04:31:04,473-05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.HotPlugDiskVDSCommand] (default task-10) [36d8a122] Command 'HotPlugDiskVDSCommand(HostName = client1, HotPlugDiskVDSParameters:{hostId='fc5c2860-36b1-4213-843f-10ca7b35556c', vmId='e13f73a0-8e20-4ec3-837f-aeacc082c7aa', diskId='d1e1286b-38cc-4d56-9d4e-f331ffbe830f', addressMap='[bus=0, controller=0, unit=2, type=drive, target=0]'})' execution failed: VDSGenericException: VDSErrorException: Failed to HotPlugDiskVDS, error = Failed to bind /dev/mapper/ on to /var/run/libvirt/qemu/21-mulivm1.mapper.: Not a directory, code = 45 >> >> > > >> >> > > Please let me know what other information will be useful and I will prove. >> >> > > >> >> > > Cheers, >> >> > > Muli >> >> > > >> >> > > On Wed, Feb 23, 2022 at 11:14 AM Benny Zlotnik <bzlotnik(a)redhat.com> wrote: >> >> > >> >> >> > >> Hi, >> >> > >> >> >> > >> We haven't tested this, and we do not have any code to handle nvme/tcp >> >> > >> drivers, only iscsi and rbd. Given the path seen in the logs >> >> > >> '/dev/mapper', it looks like it might require code changes to support >> >> > >> this. >> >> > >> Can you share cinderlib[1] and engine logs to see what is returned by >> >> > >> the driver? I may be able to estimate what would be required (it's >> >> > >> possible that it would be enough to just change the handling of the >> >> > >> path in the engine) >> >> > >> >> >> > >> [1] /var/log/ovirt-engine/cinderlib/cinderlib//log >> >> > >> >> >> > >> On Wed, Feb 23, 2022 at 10:54 AM <muli(a)lightbitslabs.com> wrote: >> >> > >> > >> >> > >> > Hi everyone, >> >> > >> > >> >> > >> > We are trying to set up ovirt (4.3.10 at the moment, customer preference) to use Lightbits (https://www.lightbitslabs.com) storage via our openstack cinder driver with cinderlib. The cinderlib and cinder driver bits are working fine but when ovirt tries to attach the device to a VM we get the following error: >> >> > >> > >> >> > >> > libvirt: error : cannot create file '/var/run/libvirt/qemu/18-mulivm1.dev/mapper/': Is a directory >> >> > >> > >> >> > >> > We get the same error regardless of whether I try to run the VM or try to attach the device while it is running. The error appears to come from vdsm which passes /dev/mapper as the prefered device? >> >> > >> > >> >> > >> > 2022-02-22 09:50:11,848-0500 INFO (vm/3ae7dcf4) [vdsm.api] FINISH appropriateDevice return={'path': '/dev/mapper/', 'truesize': '53687091200', 'apparentsize': '53687091200'} from=internal, task_id=77f40c4e-733d-4d82-b418-aaeb6b912d39 (api:54) >> >> > >> > 2022-02-22 09:50:11,849-0500 INFO (vm/3ae7dcf4) [vds] prepared volume path: /dev/mapper/ (clientIF:510) >> >> > >> > >> >> > >> > Suggestions for how to debug this further? Is this a known issue? Did anyone get nvme/tcp storage working with ovirt and/or vdsm? >> >> > >> > >> >> > >> > Thanks, >> >> > >> > Muli >> >> > >> > >> >> > >> > _______________________________________________ >> >> > >> > Users mailing list -- users(a)ovirt.org >> >> > >> > To unsubscribe send an email to users-leave(a)ovirt.org >> >> > >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html >> >> > >> > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ >> >> > >> > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/I3PAG5HMBHUOJ… >> >> > >> >> >> > > >> >> > > Lightbits Labs >> >> > > Lead the cloud-native data center transformation by delivering scalable and efficient software defined storage that is easy to consume. >> >> > > >> >> > > This message is sent in confidence for the addressee only. It may contain legally privileged information. The contents are not to be disclosed to anyone other than the addressee. Unauthorized recipients are requested to preserve this confidentiality, advise the sender immediately of any error in transmission and delete the email from their systems. >> >> > > >> >> > > >> >> > _______________________________________________ >> >> > Users mailing list -- users(a)ovirt.org >> >> > To unsubscribe send an email to users-leave(a)ovirt.org >> >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html >> >> > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ >> >> > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/DKFOCYQA6E4N3… >> >> >> > >> > Lightbits Labs >> > Lead the cloud-native data center transformation by delivering scalable and efficient software defined storage that is easy to consume. >> > >> > This message is sent in confidence for the addressee only. It may contain legally privileged information. The contents are not to be disclosed to anyone other than the addressee. Unauthorized recipients are requested to preserve this confidentiality, advise the sender immediately of any error in transmission and delete the email from their systems. >> > >> > >> > > Lightbits Labs > Lead the cloud-native data center transformation by delivering scalable and efficient software defined storage that is easy to consume. > > This message is sent in confidence for the addressee only. It may contain legally privileged information. The contents are not to be disclosed to anyone other than the addressee. Unauthorized recipients are requested to preserve this confidentiality, advise the sender immediately of any error in transmission and delete the email from their systems. > >

6 25

4.5.0 beta compose delayed to April 4th 2022
by Sandro Bonazzola 30 Mar '22

30 Mar '22

oVirt 4.5.0 beta compose has been delayed to next week on April 4th as ovirt-engine and gluster-ansible-role support for ansible-core 2.12 missed today's deadline. Test day has been rescheduled accordingly to April 5th. Testers: please continue testing the released Alpha and providing feedback https://trello.com/b/3FZ7gdhM/ovirt-450-test-day A few packages that were meant to be shipped today as part of the beta release have been already pushed to testing repositories so you can already provide some feedback on the beta sanity. Known issues: - hyperconverged deployment doesn't work due to missing updated gluster-ansible-roles packages - ovirt-engine is still using ansible 2.9.27 and wasn't updated from 4.5.0 Alpha - ovirt-appliance and oVirt Node have not been built with current content of the testing repos as beta has been rescheduled Be aware the RHEL 8.6 Beta has been released yesterday so you can already try running on top of it. Rocky Linux announced they're already building 8.6 beta as well so it may be possible to start testing on top of it soon as well. Professional Services, Integrators and Backup vendors: please run a test session against your additional services, integrated solutions, downstream rebuilds, backup solution on the released alpha release and report issues as soon as possible. If you're not listed here: https://ovirt.org/community/user-stories/users-and-providers.html consider adding your company there. If you're willing to help updating the localization for oVirt 4.5.0 please follow https://ovirt.org/develop/localization.html If you're willing to help promoting the oVirt 4.5.0 release you can submit your banner proposals for the oVirt home page and for the social media advertising at https://github.com/oVirt/ovirt-site/issues no later than April 5th As an alternative please consider submitting a case study as in https://ovirt.org/community/user-stories/user-stories.html Feature owners: please submit a presentation of your feature for oVirt Youtube channel: https://www.youtube.com/c/ovirtproject no later than April 5th If you have some new feature requiring community feedback / testing please add your case under the "Test looking for volunteer" section no later than April 4th. Do you want to contribute to getting ready for this release? Read more about oVirt community at https://ovirt.org/community/ and join the oVirt developers https://ovirt.org/develop/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 0

Updated invitation: oVirt 4.5.0 Beta release test day @ Tue Apr 5, 2022 (devel@ovirt.org)
by sbonazzo＠redhat.com 30 Mar '22

30 Mar '22

This event has been changed. Title: oVirt 4.5.0 Beta release test day If you're willing to help testing the release during the test daysplease join the oVirt development mailing list athttps://lists.ovirt.org/archives/list/devel@ovirt.org/ and report yourfeedback there.Instructions for installing oVirt 4.5.0 Beta fortesting have been added to the release pagehttps://www.ovirt.org/release/4.5.0/ Re-scheduled due to beta delay (changed) When: Tue Apr 5, 2022 (changed) Calendar: devel(a)ovirt.org Who: (Guest list has been hidden at organizer's request) Event details: https://calendar.google.com/calendar/event?action=VIEW&eid=MXZpZGdobjViaHQz… Invitation from Google Calendar: https://calendar.google.com/calendar/ You are receiving this courtesy email at the account devel(a)ovirt.org because you are an attendee of this event. To stop receiving future updates for this event, decline this event. Alternatively you can sign up for a Google account at https://calendar.google.com/calendar/ and control your notification settings for your entire calendar. Forwarding this invitation could allow any recipient to send a response to the organizer and be added to the guest list, or invite others regardless of their own invitation status, or to modify your RSVP. Learn more at https://support.google.com/calendar/answer/37135#forwarding

1 0

Updated invitation: oVirt 4.5.0 Beta compose starts @ Mon Apr 4, 2022 09:00 - 09:50 (CEST) (devel@ovirt.org)
by sbonazzo＠redhat.com 30 Mar '22

30 Mar '22

This event has been changed. Title: oVirt 4.5.0 Beta compose starts This is a placeholder to remind about oVirt 4.5.0 beta compose starting 17:00 CEST.Packages that are not ready by this time are likely to miss to be included in the release.Postponed due to some packages still not built, partially due to CentOS Stream 8 bug https://bugzilla.redhat.com/show_bug.cgi?id=2069547 .Postponed to April 4th due to ovirt-engine and gluster-ansible-roles not yet ready for ansible-core 2.12 (changed) When: Mon Apr 4, 2022 09:00 – 09:50 Central European Time - Rome (changed) Calendar: devel(a)ovirt.org Who: (Guest list has been hidden at organizer's request) Event details: https://calendar.google.com/calendar/event?action=VIEW&eid=Nmtnb3JtbjVqOW9j… Invitation from Google Calendar: https://calendar.google.com/calendar/ You are receiving this courtesy email at the account devel(a)ovirt.org because you are an attendee of this event. To stop receiving future updates for this event, decline this event. Alternatively you can sign up for a Google account at https://calendar.google.com/calendar/ and control your notification settings for your entire calendar. Forwarding this invitation could allow any recipient to send a response to the organizer and be added to the guest list, or invite others regardless of their own invitation status, or to modify your RSVP. Learn more at https://support.google.com/calendar/answer/37135#forwarding

1 0