July 2018 - Users - oVirt List Archives

oVirt host deploy: disable multipath
by femi adegoke 27 Mar '23

27 Mar '23

https://bugzilla.redhat.com/show_bug.cgi?id=1472356 There are 2 drives in my install that oVirt is claiming as multipath. I have tried blacklisting at /etc/multipath/ but that hasn't worked. Any better solutions? I need these 2 drives to be non-multipathed.

4 19

Network Address Change
by Paul.LKW 28 Dec '22

28 Dec '22

Hi All: I just has a case, I need to change the oVirt host and engine IP address due to data center decommission I checked in the hosted-engine host there are some files I could change ; in ovirt-hosted-engine/hosted-engine.conf ca_subject="O=simple.com, CN=1.2.3.4" gateway=1.2.3.254 and of course I need to change the ovirtmgmt interface IP too, I think just change the above line could do the tick, but where could I change the other host IP in the cluster ? I think I have to be lost all the host as once changed the hosted-engine host IP as it is in diff. sub net. Does there any command line tools could do that or someone has such experience could share? Best Regards, Paul.LKW

4 6

looking for some ISV backup software which integrates the backup API
by Nathanaël Blanchet 08 Jun '22

08 Jun '22

Hello, We are about to change our backup provider, and I find it is a great chance to choose a full supported ovirt backup solution. I currently use this python script vm-backup-scheduler (https://github.com/wefixit-AT/oVirtBackup) but it is not the workflow officially suggested by the community (https://www.ovirt.org/develop/release-management/features/storage/backup-re…) I've been looking for a long time an ISV who supports such an API, but the only one I found is this one : Acronis Backup Advanced suggested here https://access.redhat.com/ecosystem/search/#/ecosystem/Red%20Hat%20Enterpri… I ran the trial version, but it doesn't seem to do better than the vm-backup-scheduler script, and it doesn't seem to use the backup API (attach a clone as a disk to an existing vm). Can you suggest me some other ISV solutions, if they ever exist... or share me your backup experience?

5 4

OVS switch type for hosted-engine
by Devin A. Bougie 06 May '22

06 May '22

Is it possible to setup a hosted engine using the OVS switch type instead of Legacy? If it's not possible to start out as OVS, instructions for switching from Legacy to OVS after the fact would be greatly appreciated. Many thanks, Devin

4 5

USB3 redirection
by Rik Theys 19 Apr '22

19 Apr '22

Hi, I'm trying to assign a USB3 controller to a CentOS 7.4 VM in oVirt 4.1 with USB redirection enabled. I've created the following file in /etc/ovirt-engine/osinfo.conf.d: 01-usb.properties with content os.other.devices.usb.controller.value = nec-xhci and have restarted ovirt-engine. If I disable USB-support in the web interface for the VM, the xhci controller is added to the VM (I can see it in the qemu-kvm commandline), but usb redirection is not available. If I enable USB-support in the UI, no xhci controller is added (only 4 uhci controllers). Is there a way to make the controllers for usb redirection xhci controllers? Regards, Rik -- Rik Theys System Engineer KU Leuven - Dept. Elektrotechniek (ESAT) Kasteelpark Arenberg 10 bus 2440 - B-3001 Leuven-Heverlee +32(0)16/32.11.07 ---------------------------------------------------------------- <<Any errors in spelling, tact or fact are transmission errors>>

3 5

OVN routing and firewalling in oVirt
by Gianluca Cecchi 19 Apr '22

19 Apr '22

Hello, how do we manage routing between different OVN networks in oVirt? And between OVN networks and physical ones? Based on architecture read here: http://openvswitch.org/support/dist-docs/ovn-architecture.7.html I see terms for logical routers and gateway routers respectively but how to apply to oVirt configuration? Do I have to choose between setting up a specialized VM or a physical one: is it applicable/advisable to put on oVirt host itself the gateway functionality? Is there any security policy (like security groups in Openstack) to implement? Thanks, Gianluca

4 6

Install hosted-engine - Task Get local VM IP failed
by florentl 10 Mar '22

10 Mar '22

Hi all, I try to install hosted-engine on node : ovirt-node-ng-4.2.3-0.20180518. Every times I get stuck on : [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:6c:5a:91 | awk '{ print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.108872", "end": "2018-06-01 11:17:34.421769", "rc": 0, "start": "2018-06-01 11:17:34.312897", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} I tried with static IP Address and with DHCP but both failed. To be more specific, I installed three nodes, deployed glusterfs with the wizard. I'm in a nested virtualization environment for this lab (Vmware Esxi Hypervisor). My node IP is : 192.168.176.40 / and I want the hosted-engine vm has 192.168.176.43. Thanks, Florent

7 17

OVN and change of mgmt network
by Gianluca Cecchi 26 Jan '21

26 Jan '21

Hello, I previously had OVN running on engine (as OVN provider with northd and northbound and southbound DBs) and hosts (with OVN controller). After changing mgmt ip of hosts (engine has retained instead the same ip), I executed again on them the command: vdsm-tool ovn-config <ip_of_engine> <nel_local_ip_of_host> Now I think I have to clean up some things, eg: 1) On engine where I get these lines below systemctl status ovn-northd.service -l . . . Sep 29 14:41:42 ovmgr1 ovsdb-server[940]: ovs|00005|reconnect|ERR|tcp: 10.4.167.40:37272: no response to inactivity probe after 5 seconds, disconnecting Oct 03 11:52:00 ovmgr1 ovsdb-server[940]: ovs|00006|reconnect|ERR|tcp: 10.4.167.41:52078: no response to inactivity probe after 5 seconds, disconnecting The two IPs are the old ones of two hosts It seems that a restart of the services has fixed... Can anyone confirm if I have to do anything else? 2) On hosts (there are 3 hosts with OVN on ip 10.4.192.32/33/34) where I currently have this output [root@ov301 ~]# ovs-vsctl show 3a38c5bb-0abf-493d-a2e6-345af8aedfe3 Bridge br-int fail_mode: secure Port "ovn-1dce5b-0" Interface "ovn-1dce5b-0" type: geneve options: {csum="true", key=flow, remote_ip="10.4.192.32"} Port "ovn-ddecf0-0" Interface "ovn-ddecf0-0" type: geneve options: {csum="true", key=flow, remote_ip="10.4.192.33"} Port "ovn-fd413b-0" Interface "ovn-fd413b-0" type: geneve options: {csum="true", key=flow, remote_ip="10.4.168.74"} Port br-int Interface br-int type: internal ovs_version: "2.7.2" [root@ov301 ~]# The IPs of kind 10.4.192.x are ok. But there is a left-over of an old host I initially used for tests, corresponding to 10.4.168.74, that now doesn't exist anymore How can I clean records for 1) and 2)? Thanks, Gianluca

3 4

deprecating export domain?
by Charles Kozler 30 Aug '20

30 Aug '20

Hello, I recently read on this list from a redhat member that export domain is either being deprecated or looking at being deprecated To that end, can you share details? Can you share any notes/postings/bz's that document this? I would imagine something like this would be discussed in larger audience This seems like a somewhat significant change to make and I am curious where this is scheduled? Currently, a lot of my backups rely explicitly on an export domain for online snapshots, so I'd like to plan accordingly Thanks!

11 21

Vm suddenly paused with error "vm has paused due to unknown storage error"
by Jasper Siero 18 Feb '20

18 Feb '20

Hi all, Since we upgraded our Ovirt nodes to CentOS 7 a vm (not a specific one but never more then one) will sometimes pause suddenly with the error "VM ... has paused due to unknown storage error". It happens now two times in a month. The Ovirt node uses san storage for the vm's running on it. When a specific vm is pausing with an error the other vm's keeps running without problems. The vm runs without problems after unpausing it. Versions: CentOS Linux release 7.1.1503 vdsm-4.14.17-0 libvirt-daemon-1.2.8-16 vdsm.log: VM Channels Listener::DEBUG::2015-10-25 07:43:54,382::vmChannels::95::vds::(_handle_timeouts) Timeout on fileno 78. libvirtEventLoop::INFO::2015-10-25 07:43:56,177::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother libvirtEventLoop::DEBUG::2015-10-25 07:43:56,178::vm::5204::vm.Vm::(_onLibvirtLifecycleEvent) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::event Suspended detail 2 opaque None libvirtEventLoop::INFO::2015-10-25 07:43:56,178::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother ........... libvirtEventLoop::INFO::2015-10-25 07:43:56,180::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother specific error part in libvirt vm log: block I/O error in device 'drive-virtio-disk0': Unknown error 32758 (32758) ........... block I/O error in device 'drive-virtio-disk0': Unknown error 32758 (32758) engine.log: 2015-10-25 07:44:48,945 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-40) [a43dcc8] VM diataal-prod-cas1 77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb moved from Up --> Paused 2015-10-25 07:44:49,003 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-40) [a43dcc8] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VM diataal-prod-cas1 has paused due to unknown storage error. Has anyone experienced the same problem or knows a way to solve this? Kind regards, Jasper

3 3

Agentless backup solutions
by femi adegoke 07 Aug '19

07 Aug '19

What backup solutions are people using? I'm only interested in host-level backups (no agents in the vm's) I am aware of the following products: https://storware.eu/en/storware-vprotect/ https://github.com/zipurman/oVIRT_Simple_Backup https://www.sepusa.com/ Any others?

9 16

Unable to find OVF_STORE after recovery / upgrade
by Sam Cappello 26 May '19

26 May '19

This is a multi-part message in MIME format. --------------05F3D0780062C6D37C1619A7 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Hi, so i was running a 3.4 hosted engine two node setup on centos 6, had some disk issues so i tried to upgrade to centos 7 and follow the path 3.4 > 3.5 > 3.6 > 4.0. i screwed up dig time somewhere between 3.6 and 4.0, so i wiped the drives, installed a fresh 4.0.3, then created the database and restored the 3.6 engine backup before running engine-setup as per the docs. things seemed to work, but i have the the following issues / symptoms: - ovirt-ha-agent running 100% CPU on both nodes - messages in the UI that the Hosted Engine storage Domain isn't active and Failed to import the Hosted Engine Storage Domain - hosted engine is not visible in the UI and the following repeating in the agent.log: MainThread::INFO::2016-10-03 12:38:27,718::hosted_engine::461::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Current state EngineUp (score: 3400) MainThread::INFO::2016-10-03 12:38:27,720::hosted_engine::466::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Best remote host vmhost1.oracool.net (id: 1, score: 3400) MainThread::INFO::2016-10-03 12:38:37,979::states::421::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume) Engine vm running on localhost MainThread::INFO::2016-10-03 12:38:37,985::hosted_engine::612::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Initializing VDSM MainThread::INFO::2016-10-03 12:38:45,645::hosted_engine::639::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Connecting the storage MainThread::INFO::2016-10-03 12:38:45,647::storage_server::219::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2016-10-03 12:39:00,543::storage_server::226::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2016-10-03 12:39:00,562::storage_server::233::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Refreshing the storage domain MainThread::INFO::2016-10-03 12:39:01,235::hosted_engine::666::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Preparing images MainThread::INFO::2016-10-03 12:39:01,236::image::126::ovirt_hosted_engine_ha.lib.image.Image::(prepare_images) Preparing images MainThread::INFO::2016-10-03 12:39:09,295::hosted_engine::669::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Reloading vm.conf from the shared storage domain MainThread::INFO::2016-10-03 12:39:09,296::config::206::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Trying to get a fresher copy of vm configuration from the OVF_STORE MainThread::WARNING::2016-10-03 12:39:16,928::ovf_store::107::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan) Unable to find OVF_STORE MainThread::ERROR::2016-10-03 12:39:16,934::config::235::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Unable to get vm.conf from OVF_STORE, falling back to initial vm.conf I have searched a bit and not really found a solution, and have come to the conclusion that i have made a mess of things, and am wondering if the best solution is to export the VMs, and reinstall everything then import them back? i am using remote NFS storage. if i try and add the hosted engine storage domain it says it is already registered. i have also upgraded and am now running oVirt Engine Version: 4.0.4.4-1.el7.centos hosts were installed using ovirt-node. currently at 3.10.0-327.28.3.el7.x86_64 if a fresh install is best, any advice / pointer to doc that explains best way to do this? i have not moved my most important server over to this cluster yet so i can take some downtime to reinstall. thanks! sam --------------05F3D0780062C6D37C1619A7 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hi,<br> so i was running a 3.4 hosted engine two node setup on centos 6, had some disk issues so i tried to upgrade to centos 7 and follow the path 3.4 > 3.5 > 3.6 > 4.0. i screwed up dig time somewhere between 3.6 and 4.0, so i wiped the drives, installed a fresh 4.0.3, then created the database and restored the 3.6 engine backup before running engine-setup as per the docs. things seemed to work, but i have the the following issues / symptoms:<br> - ovirt-ha-agent running 100% CPU on both nodes<br> - messages in the UI that the Hosted Engine storage Domain isn't active and Failed to import the Hosted Engine Storage Domain<br> - hosted engine is not visible in the UI<br> and the following repeating in the agent.log:<br> <br> MainThread::INFO::2016-10-03 12:38:27,718::hosted_engine::461::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Current state EngineUp (score: 3400)<br> MainThread::INFO::2016-10-03 12:38:27,720::hosted_engine::466::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Best remote host vmhost1.oracool.net (id: 1, score: 3400)<br> MainThread::INFO::2016-10-03 12:38:37,979::states::421::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume) Engine vm running on localhost<br> MainThread::INFO::2016-10-03 12:38:37,985::hosted_engine::612::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Initializing VDSM<br> MainThread::INFO::2016-10-03 12:38:45,645::hosted_engine::639::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Connecting the storage<br> MainThread::INFO::2016-10-03 12:38:45,647::storage_server::219::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server<br> MainThread::INFO::2016-10-03 12:39:00,543::storage_server::226::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server<br> MainThread::INFO::2016-10-03 12:39:00,562::storage_server::233::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Refreshing the storage domain<br> MainThread::INFO::2016-10-03 12:39:01,235::hosted_engine::666::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Preparing images<br> MainThread::INFO::2016-10-03 12:39:01,236::image::126::ovirt_hosted_engine_ha.lib.image.Image::(prepare_images) Preparing images<br> MainThread::INFO::2016-10-03 12:39:09,295::hosted_engine::669::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Reloading vm.conf from the shared storage domain<br> MainThread::INFO::2016-10-03 12:39:09,296::config::206::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Trying to get a fresher copy of vm configuration from the OVF_STORE<br> MainThread::WARNING::2016-10-03 12:39:16,928::ovf_store::107::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan) Unable to find OVF_STORE<br> MainThread::ERROR::2016-10-03 12:39:16,934::config::235::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Unable to get vm.conf from OVF_STORE, falling back to initial vm.conf<br> <br> I have searched a bit and not really found a solution, and have come to the conclusion that i have made a mess of things, and am wondering if the best solution is to export the VMs, and reinstall everything then import them back?<br> i am using remote NFS storage.<br> if i try and add the hosted engine storage domain it says it is already registered.<br> i have also upgraded and am now running <span class="gwt-InlineLabel">oVirt Engine Version: 4.0.4.4-1.el7.centos<br> hosts were installed using ovirt-node. currently at 3.10.0-327.28.3.el7.x86_64<br> if a fresh install is best, any advice / pointer to doc that explains best way to do this?<br> i have not moved my most important server over to this cluster yet so i can take some downtime to reinstall.<br> thanks!<br> sam<br> <br> </span><br> </body> </html> --------------05F3D0780062C6D37C1619A7--

3 2

[Users] Problem Creating "oVirtEngine" Machine
by Richie＠HIP 15 May '19

15 May '19

--Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=windows-1252 I can't agree with you more. Modifying every box's or Virtual Machine's = HOSTS file with a FQDN and IP SHOULD work, but in my case it is not. = There are several reasons I've come to believe could be the problem = during my trial-and-errors testing and learning. FIRST - MACHINE IPs. THe machine's "Names" where not appearing in the Microsoft Active = Directory DHCP along with their assigned IPs; in other words, the DHCP = just showed an "Assigned IP", equal to the Linux Machine's IP, with a = <empty> ('i.e. blank, none, silch, plan old "no-letters-or-numbers") = "Name" in the "Name" (i.e. machines "network name", or FQDN-value used = by the Windows AD DNS-service) column. =20 if your IP is is appearing with an <empty> "name", there is no "host = name" to associate the IP, it makes it difficult to define a FQDN; which = isn't that useful if we're going to use the HOSTS files in all = participating machines in an oVirt Installation. I kept banging my head for three (3) long hours trying to find the = problem. In Fedora 18, I could't find where the "network name" of the machine = could be defined. =20 I tried putting the "Additional Search Domains" and/or "DHCP Client ID" = in Fedora's 18 Desktop - under "System Settings > Hardware > Network > = Options > IPv4 Setting" The DHCP went crazy; showing an "Aberrant-MAC-Address" (i.e. a really = long-sting value where the machine's MAC address should be), and we knew = the MAC address as we obtained using "ifconfig" on the machine getting = it's IP from the DHCP. So we reverted these entries from the = aforementioned, rebooted, and got an assigned IP, with proper MAC = address, but still no "Name" Kept wondering around the "Settings" and seeing which one made sense, = but what the heck, I went for it. =20 Under "System Settings > System > Details" I found the information about = GNOME and the machine's hardware. =20 There was a field for "Device Name" that originally had = "localhost.localdomain"; I changed the value to "ovirtmanager". and = under "Graphic" changed to "Forced Fallback Mode" to "ON". =20 I also installed all Kerberos libraries and client (i.e. authconfig-gtk, = authhub, authhub-client, krb5-apple-clents, krb5-auth-dialog, = krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) and rebooted VOILA=85!!! =20 I don;t know if it was the definition of "Device Name" from = "localhost.localdomain" to "ovirtengine", of the Kerberos libraries = install, or both. But finally the MS AD DHCP was showing the = Addigned-IP, the machine "Name" and the proper MAC-address. Regardless, = setting the machine's "Network Name" under "System Settings > System > = Details > Device Name", with no explanation of what "Device Name" meant = or was used for, was the last place I would have imagined this network = setting could be defined. NOTE - Somebody has to try the two steps I did together, separately. to = see which one is the real problem-solver; for me it is working, and "if = it ain't broke, don't fix it=85" Now that I have the DHCP / IP thing sorted, I have to do the DNS stuff. To this point, I've addressed the DHCP and "Network Name" of the = IP-Lease (required for the DNS to work). This still does't completely = explain why, by modifying the HOSTS file (allowing be to set and IP and = non-DNS FQDN). allows me to install the oVirtEngine "as long as I do not = use default HTTPd service parameters as suggested by the install". By = using the HOST file to "define" FQDNs, AND NOT using the default HTTPd = suggested changes, I'm able to install the oVirtEngine (given that I use = ports 8700 and 8701) to access the "oVirtEngine Welcome Screen", BUT = NONE of the "oVirt Portals" work=85 YET=85!!! More to come during the week Richie Jos=E9 E ("Richie") Piovanetti, MD, MS=20 M: 787-615-4884 | richiepiovanetti(a)healthcareinfopartners.com On Aug 2, 2013, at 3:10 AM, Joop <jvdwege(a)xs4all.nl> wrote: > Hello Ritchie, >=20 >> In a conversation via IRC, someone suggested that I activate = "dnsmask" to overcome what appears to be a DNS problem. I'll try that = other possibility once I get home later today. >>=20 >> In the mean time, what do you mean by "fixing the hostname"=85? I = opened and fixed the HOSTNAMES and changed it from = "localhost-localdomain" to "localhost.localdomain" and that made no = difference. Albeit, after changing I didm;t restart, remove ovirtEngine = ((using "engine-cleanup") and reinstalled via "engine-setup". Is that = what you mean=85? >>=20 >>=20 >>=20 >> In the mean time, the fact that even if I resolve the issue of = oVirtEngine I will not be able to connect to the oVirt Nodes unless I = have DNS resolution, apparently means I should do something with = resolving via DNS in my home LAN (i.e implement some sort of "DNS Cache" = so I can resolve my home computers via DNS inside my LAN). >>=20 >> Any suggestions are MORE THAN WELCOME=85!!! >> =20 >=20 > Having setup ovirt more than I can count right now I share your = feeling that it isn't always clear why things are going wrong, but in = this case I suspect that there is a rather small thing missing. > In short if you setup ovirt-engine, either using virtualbox or on real = hardware, and you give your host a meaningfull name AND you add that = info also in your /etc/hosts file than things SHOULD work, no need for = dnsmasq or even bind. Would make things easier once you start adding = virt hosts to you infrastructure since you will need to duplicate these = actions on each host (add engine name/ip to each host and add each host = to the others and all hosts to engine) >=20 > Just ask if you need more assistance and I will write down a small = howto that should work out of the box else I might have some time to see = if I can get things going. >=20 > Regards, >=20 > Joop >=20 --Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=windows-1252 <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html = charset=3Dwindows-1252"></head><body style=3D"word-wrap: break-word; = -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">I = can't agree with you more.  Modifying every box's or Virtual = Machine's HOSTS file with a FQDN and IP SHOULD work, but in my case it = is not.  There are several reasons I've come to believe could be = the problem during my trial-and-errors testing and = learning.<div><div><br></div><div>FIRST - MACHINE IPs.</div><ul = class=3D"MailOutline"><li>THe machine's "Names" where not appearing in = the <b>Microsoft Active Directory DHCP</b> along with their assigned = IPs; in other words, the DHCP just showed an "Assigned IP", equal to the = Linux Machine's IP, with a <empty> ('i.e. blank, none, silch, plan = old "no-letters-or-numbers") "Name" in the "Name" (i.e. machines = "network name", or FQDN-value used by the Windows AD DNS-service) = column.  </li><li>if your IP is is appearing with an <empty> = "name", there is no "host name" to associate the IP, it makes it = difficult to define a FQDN; which isn't that useful if we're going to = use the HOSTS files in all participating machines in an oVirt = Installation.</li><li>I kept banging my head for three (3) long hours = trying to find the problem.</li><ul><li>In Fedora 18, I could't find = where the "network name" of the machine could be defined. =  </li><li>I tried putting the "Additional Search Domains" and/or = "DHCP Client ID" in Fedora's 18 Desktop - under "System Settings > = Hardware > Network > Options > IPv4 Setting"</li><ul><li>The = DHCP went crazy;  showing an "Aberrant-MAC-Address" (i.e. a really = long-sting value where the machine's MAC address should be), and we knew = the MAC address as we obtained using "ifconfig" on the machine getting = it's IP from the DHCP.  So we reverted these entries from the = aforementioned, rebooted, and got an assigned IP, with proper MAC = address, but still no "Name"</li></ul><li>Kept wondering around the = "Settings" and seeing which one made sense, but what the heck, I went = for it.  </li><ul><li>Under "System Settings > System > = Details" I found the information about GNOME and the machine's hardware. =  </li><li>There was a field for "Device Name" that originally had = "localhost.localdomain"; I changed the value to "ovirtmanager". and = under "Graphic" changed to "Forced Fallback Mode" to "ON". =  </li><li>I also installed all Kerberos libraries and client (i.e. = authconfig-gtk, authhub, authhub-client, krb5-apple-clents, = krb5-auth-dialog, krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) = and rebooted</li><li>VOILA=85!!!  </li></ul><li>I don;t know if it = was the definition of "Device Name" from "localhost.localdomain" to = "ovirtengine", of the Kerberos libraries install, or both.  But = finally the MS AD DHCP was showing the Addigned-IP, the machine "Name" = and the proper MAC-address.  Regardless, setting the machine's = "Network Name" under "System Settings > System > Details = > Device Name", with no explanation of what "Device Name" meant = or was used for, was the last place I would have imagined this = network setting could be defined.</li><li><b>NOTE</b> - Somebody has to = try the two steps I did together, separately. to see which one is the = real problem-solver; for me it is working, and "if it ain't broke, don't = fix it=85"</li></ul></ul><div><br = class=3D"webkit-block-placeholder"></div><div>Now that I have the DHCP / = IP thing sorted, I have to do the DNS stuff.</div><div><br></div><div>To = this point, I've addressed the DHCP and "Network Name" of the IP-Lease = (required for the DNS to work).  This still does't completely = explain why, by modifying the HOSTS file (allowing be to set and IP and = non-DNS FQDN). allows me to install the oVirtEngine "<b><i>as long as I = do not use default  HTTPd service parameters as suggested by the = install</i></b>".  <b>By using the HOST file to "define" FQDNs, AND = NOT using the default HTTPd suggested changes, I'm able to install the = oVirtEngine (given that I use ports 8700 and 8701) to access the = "oVirtEngine Welcome Screen", BUT NONE of the "oVirt Portals" work</b>=85 = YET=85!!!</div><div><br></div><div>More to come during the = week</div><div><br></div><div>Richie</div><div = apple-content-edited=3D"true"><br>Jos=E9 E ("Richie") Piovanetti, MD, = MS <br>M: 787-615-4884 | <a = href=3D"mailto:richiepiovanetti@healthcareinfopartners.com">richiepiovanet= ti(a)healthcareinfopartners.com</a><br><br><br><br><br><br></div><br><div><d= iv>On Aug 2, 2013, at 3:10 AM, Joop <<a = href=3D"mailto:jvdwege@xs4all.nl">jvdwege(a)xs4all.nl</a>> = wrote:</div><br class=3D"Apple-interchange-newline"><blockquote = type=3D"cite">Hello Ritchie,<br><br><blockquote type=3D"cite">In a = conversation via IRC, someone suggested that I activate "dnsmask" to = overcome what appears to be a DNS problem.  I'll try that other = possibility once I get home later today.<br><br>In the mean time, what = do you mean by "fixing the hostname"=85?  I opened and fixed the = HOSTNAMES and changed it from "localhost-localdomain" to = "localhost.localdomain" and that made no difference.  Albeit, after = changing I didm;t restart, remove ovirtEngine ((using "engine-cleanup") = and reinstalled via "engine-setup".  Is that what you = mean=85?<br><br><br><br>In the mean time, the fact that even if I = resolve the issue of oVirtEngine I will not be able to connect to the = oVirt Nodes unless I have DNS resolution, apparently means I should do = something with resolving via DNS in my home LAN (i.e implement some sort = of "DNS Cache" so I can resolve my home computers via DNS inside my = LAN).<br><br>Any suggestions are MORE THAN WELCOME=85!!!<br> =  <br></blockquote><br>Having setup ovirt more than I can count = right now I share your feeling that it isn't always clear why things are = going wrong, but in this case I suspect that there is a rather small = thing missing.<br>In short if you setup ovirt-engine, either using = virtualbox or on real hardware, and you give your host a meaningfull = name AND you add that info also in your /etc/hosts file than things = SHOULD work, no need for dnsmasq or even bind. Would make things easier = once you start adding virt hosts to you infrastructure since you will = need to duplicate these actions on each host (add engine name/ip to each = host and add each host to the others and all hosts to = engine)<br><br>Just ask if you need more assistance and I will write = down a small howto that should work out of the box else I might have = some time to see if I can get things = going.<br><br>Regards,<br><br>Joop<br><br></blockquote></div><br></div></b= ody></html>= --Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241--

2 1

Re: [ovirt-users] Question about the ovirt-engine-sdk-java
by Michael Pasternak 15 May '19

15 May '19

------=_Part_1975902_834617789.1445161505459 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Hi=C2=A0Salifou, Actually java sdk is=C2=A0intentionally=C2=A0hiding transport level interna= ls so developers could stay in java domain,if your headers are static, easi= est way would be using reverse proxy in a middle to intercept requests,=C2= =A0 can you tell me why do you need this? =20 On Friday, October 16, 2015 1:14 AM, Salifou Sidi M. Malick <ssidimah@= redhat.com> wrote: =20 Hi Micheal, I have a question about the ovirt-engine-sdk-java. Is there a way to add custom request headers to each RHEVM API call? Here is an example of a request that I would like to do: $ curl -v -k \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "ID: user1(a)ad.xyz.com" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "PASSWORD: Pwssd" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "TARGET: kobe" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 https://vm0.smalick.com/api/hosts I would like to add ID, PASSWORD and TARGET as HTTP request header.=20 Thanks, Salifou ------=_Part_1975902_834617789.1445161505459 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable <html><head></head><body><div style=3D"color:#000; background-color:#fff; f= ont-family:HelveticaNeue-Light, Helvetica Neue Light, Helvetica Neue, Helve= tica, Arial, Lucida Grande, sans-serif;font-size:13px"><div id=3D"yui_3_16_= 0_1_1445160422533_3555" dir=3D"ltr"><span id=3D"yui_3_16_0_1_1445160422533_= 4552">Hi </span><span style=3D"font-family: 'Helvetica Neue', 'Segoe U= I', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"yui_3_16_0_1_1445= 160422533_3568" class=3D"">Salifou,</span></div><div id=3D"yui_3_16_0_1_144= 5160422533_3555" dir=3D"ltr"><span style=3D"font-family: 'Helvetica Neue', = 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" class=3D""><br>= </span></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span = style=3D"font-family: 'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Luci= da Grande', sans-serif;" class=3D"" id=3D"yui_3_16_0_1_1445160422533_3595">= Actually java sdk is </span><span style=3D"font-family: 'Helvetica Neu= e', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"yui_3= _16_0_1_1445160422533_4360" class=3D"">intentionally </span><span styl= e=3D"font-family: 'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Lucida G= rande', sans-serif;" id=3D"yui_3_16_0_1_1445160422533_4362" class=3D"">hidi= ng transport level internals so developers could stay in java domain,</span= ></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span class= =3D"" id=3D"yui_3_16_0_1_1445160422533_4435"><font face=3D"Helvetica Neue, = Segoe UI, Helvetica, Arial, Lucida Grande, sans-serif" id=3D"yui_3_16_0_1_1= 445160422533_4432" class=3D"">if your headers are static, easiest way would= be using reverse proxy in a middle to intercept requests, </font><br>= </span></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span = class=3D""><font face=3D"Helvetica Neue, Segoe UI, Helvetica, Arial, Lucida= Grande, sans-serif" class=3D""><br></font></span></div><div id=3D"yui_3_16= _0_1_1445160422533_3555" dir=3D"ltr"><span style=3D"font-family: 'Helvetica= Neue', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"y= ui_3_16_0_1_1445160422533_4357">can you tell me why do you need this?</span= ><br></div> <br><div class=3D"qtdSeparateBR"><br><br></div><div class=3D"y= ahoo_quoted" style=3D"display: block;"> <div style=3D"font-family: Helvetic= aNeue-Light, Helvetica Neue Light, Helvetica Neue, Helvetica, Arial, Lucida= Grande, sans-serif; font-size: 13px;"> <div style=3D"font-family: Helvetic= aNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-si= ze: 16px;"> <div dir=3D"ltr"> <font size=3D"2" face=3D"Arial"> On Friday, O= ctober 16, 2015 1:14 AM, Salifou Sidi M. Malick <ssidimah(a)redhat.com>= wrote:<br> </font> </div> <br><br> <div class=3D"y_msg_container">Hi Mich= eal,<br><br>I have a question about the ovirt-engine-sdk-java.<br><br>Is th= ere a way to add custom request headers to each RHEVM API call?<br><br>Here= is an example of a request that I would like to do:<br><br>$ curl -v -k \<= br>          -H "ID: <a ymailto=3D"mailto:user1@ad= .xyz.com" href=3D"mailto:user1@ad.xyz.com">user1(a)ad.xyz.com</a>" \<br>&nbsp= ;         -H "PASSWORD: Pwssd" \<br>    &nbsp= ;     -H "TARGET: kobe" \<br>          <= a href=3D"https://vm0.smalick.com/api/hosts" target=3D"_blank">https://vm0.= smalick.com/api/hosts</a><br><br><br>I would like to add ID, PASSWORD and T= ARGET as HTTP request header. <br><br>Thanks,<br>Salifou<br><br><br><br></d= iv> </div> </div> </div></div></body></html> ------=_Part_1975902_834617789.1445161505459--

2 1

[Users] oVirt Weekly Sync Meeting Minutes -- 2012-05-23
by Mike Burns 15 May '19

15 May '19

Minutes: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.html Minutes (text): http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.txt Log: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html ========================= #ovirt: oVirt Weekly Sync ========================= Meeting started by mburns at 14:00:23 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html . Meeting summary --------------- * agenda and roll call (mburns, 14:00:41) * Status of next release (mburns, 14:05:17) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822145 (mburns, 14:05:29) * AGREED: freeze date and beta release delayed by 1 week to 2012-06-07 (mburns, 14:12:33) * post freeze, release notes flag needs to be used where required (mburns, 14:14:21) * https://bugzilla.redhat.com/show_bug.cgi?id=821867 is a VDSM blocker for 3.1 (oschreib, 14:17:27) * ACTION: dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas (oschreib, 14:21:44) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822158 (mburns, 14:23:39) * assignee not available, update to come tomorrow (mburns, 14:24:59) * ACTION: oschreib to make sure BZ#822158 is handled quickly (oschreib, 14:25:29) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824397 (mburns, 14:28:55) * 824397 expected to be merged prior next week's meeting (mburns, 14:29:45) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824420 (mburns, 14:30:15) * tracker for node based on F17 (mburns, 14:30:28) * blocked by util-linux bug currently (mburns, 14:30:40) * new build expected from util-linux maintainer in next couple days (mburns, 14:30:55) * sub-project status -- engine (mburns, 14:32:49) * nothing to report outside of blockers discussed above (mburns, 14:34:00) * sub-project status -- vdsm (mburns, 14:34:09) * nothing outside of blockers above (mburns, 14:35:36) * sub-project status -- node (mburns, 14:35:43) * working on f17 migration, but blocked by util-linux bug (mburns, 14:35:58) * should be ready for freeze deadline (mburns, 14:36:23) * Review decision on Java 7 and Fedora jboss rpms in oVirt Engine (mburns, 14:36:43) * Java7 basically working (mburns, 14:37:19) * LINK: http://gerrit.ovirt.org/#change,4416 (oschreib, 14:39:35) * engine will make ack/nack statement next week (mburns, 14:39:49) * fedora jboss rpms patch is in review, short tests passed (mburns, 14:40:04) * engine ack on fedora jboss rpms and java7 needed next week (mburns, 14:44:47) * Upcoming Workshops (mburns, 14:45:11) * NetApp workshop set for Jan 22-24 2013 (mburns, 14:47:16) * already at half capacity for Workshop at LinuxCon Japan (mburns, 14:47:37) * please continue to promote it (mburns, 14:48:19) * proposal: board meeting to be held at all major workshops (mburns, 14:48:43) * LINK: http://www.ovirt.org/wiki/OVirt_Global_Workshops (mburns, 14:49:30) * Open Discussion (mburns, 14:50:12) * oVirt/Quantum integration discussion will be held separately (mburns, 14:50:43) Meeting ended at 14:52:47 UTC. Action Items ------------ * dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas * oschreib to make sure BZ#822158 is handled quickly Action Items, by person ----------------------- * dougsland * dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas * oschreib * oschreib to make sure BZ#822158 is handled quickly * **UNASSIGNED** * (none) People Present (lines said) --------------------------- * mburns (98) * oschreib (55) * doronf (12) * lh (11) * sgordon (8) * dougsland (8) * ovirtbot (6) * ofrenkel (4) * cestila (2) * RobertMdroid (2) * ydary (2) * rickyh (1) * yzaslavs (1) * cctrieloff (1) * mestery_ (1) * dustins (1) Generated by `MeetBot`_ 0.1.4 .. _`MeetBot`: http://wiki.debian.org/MeetBot

2 1

[QE][ACTION REQUIRED] oVirt 3.5.1 RC status - postponed
by Sandro Bonazzola 15 May '19

15 May '19

Hi, We have still blockers for oVirt 3.5.1 RC release so we need to postpone it until they'll be fixed. The bug tracker [1] shows 1 open blocker: Bug ID Whiteboard Status Summary 1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. - ACTION: Gilad please provide ETA on above blocker, the new proposed RC date will be decided on the given ETA. Maintainers: - Please be sure that 3.5 snapshot allow to create VMs - Please be sure that no pending patches are going to block the release - If any patch must block the RC release please raise the issue as soon as possible. There are still 57 bugs [2] targeted to 3.5.1. Excluding node and documentation bugs we still have 37 bugs [3] targeted to 3.5.1. Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed. - ACTION: Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1: it will ease gathering the blocking bugs for next releases. - ACTION: Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr [4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

2 1

VM has paused due to no storage space error
by Sandvik Agustin 15 May '19

15 May '19

Hi users, I have this problem that sometimes 1 to 3 VM just automatically paused with user interaction and getting this error "VM has paused due to no storage space error". any inputs from you guys are very appreciated. TIA Sandvik

5 5

VM Import from remote libvirt Server on web gui with Host key verification failed or permission denied error
by Rogério Ceni Coelho 15 May '19

15 May '19

Hi Ovirt Jedi´s !!! First of all, congratulations for this amazing product. I am an Vmware and Hyper-V Engineer but i am very excited with oVirt. Now, let´s go to work ... :-) I am trying to Import vm from remote libvirt server on web gui but i was unable to solve the problem until now. [image: pasted1] Node logs : [root@hlg-rbs-ovirt-kvm01-poa ~]# tail -f /var/log/vdsm/vdsm.log | grep -i error | grep -v Host.getStats jsonrpc.Executor/0::ERROR::2016-10-06 10:24:52,432::v2v::151::root::(get_external_vms) error connection to hypervisor: 'Cannot recv data: Permission denied, please try again.\r\nPermission denied, please try again.\r\nPermission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer' jsonrpc.Executor/0::INFO::2016-10-06 10:24:52,433::__init__::513::jsonrpc.JsonRpcServer::(_serveRequest) RPC call Host.getExternalVMs failed (error 65) in 10.05 seconds [root@hlg-rbs-ovirt-kvm02-poa ~]# grep error /var/log/vdsm/vdsm.log | grep get_external_vms jsonrpc.Executor/7::ERROR::2016-10-06 10:25:37,344::v2v::151::root::(get_external_vms) error connection to hypervisor: 'Cannot recv data: Host key verification failed.: Connection reset by peer' [root@hlg-rbs-ovirt-kvm02-poa ~]# Engine Logs : [root@hlg-rbs-ovirt01-poa ~]# tail -f /var/log/ovirt-engine/engine.log 2016-10-06 10:24:42,377 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] START, GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm01-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='5feddfba-d7b2-423e-a946-ac2bf36906fa', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'}), log id: eb750c7 *2016-10-06 10:24:53,435 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again.* *Permission denied, please try again.* *Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer]* 2016-10-06 10:24:53,435 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Failed in 'GetVmsFromExternalProviderVDS' method 2016-10-06 10:24:53,435 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer] 2016-10-06 10:24:53,454 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-97) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM hlg-rbs-ovirt-kvm01-poa.rbs.com.br command failed: Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer 2016-10-06 10:24:53,454 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@6c6f696c' 2016-10-06 10:24:53,454 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] HostName = hlg-rbs-ovirt-kvm01-poa.rbs.com.br 2016-10-06 10:24:53,454 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Command 'GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm01-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='5feddfba-d7b2-423e-a946-ac2bf36906fa', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'})' execution failed: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 2016-10-06 10:24:53,454 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id: eb750c7 2016-10-06 10:24:53,459 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-97) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: Failed to retrieve VMs information from external server qemu+ssh://root@prd-openshift-kvm03-poa.rbs.com.br/system 2016-10-06 10:24:53,459 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-97) [] Query 'GetVmsFromExternalProviderQuery' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) 2016-10-06 10:24:53,460 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-97) [] Exception: org.ovirt.engine.core.common.errors.EngineException: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103) [bll.jar:] at org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33) [dal.jar:] at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529) [bll.jar:] at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13) [bll.jar:] at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) [weld-core-impl-2.3.2.Final.jar:2.3.2.Final] at org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45) [wildfly-ee-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636) at org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195) at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73) at org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown Source) [common.jar:] at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53) at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196) at com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172) at com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233) at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129) at org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132) at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73) [branding.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84) at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62) at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36) at org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131) at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51) at io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46) at io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64) at io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56) at io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60) at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77) at io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50) at io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284) at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263) at io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81) at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174) at io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) at io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) [rt.jar:1.8.0_102] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) [rt.jar:1.8.0_102] at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102] 2016-10-06 10:25:27,202 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] START, GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm02-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='f9c9d929-b460-4102-bb29-de1e6ad6ad72', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'}), log id: 4f3174a6 *2016-10-06 10:25:38,338 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Host key verification failed.: Connection reset by peer]* 2016-10-06 10:25:38,338 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Failed in 'GetVmsFromExternalProviderVDS' method 2016-10-06 10:25:38,338 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Host key verification failed.: Connection reset by peer] 2016-10-06 10:25:38,343 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-113) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM hlg-rbs-ovirt-kvm02-poa.rbs.com.br command failed: Cannot recv data: Host key verification failed.: Connection reset by peer 2016-10-06 10:25:38,343 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@42dd60af' 2016-10-06 10:25:38,343 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] HostName = hlg-rbs-ovirt-kvm02-poa.rbs.com.br 2016-10-06 10:25:38,343 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Command 'GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm02-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='f9c9d929-b460-4102-bb29-de1e6ad6ad72', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'})' execution failed: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key verification failed.: Connection reset by peer, code = 65 2016-10-06 10:25:38,343 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id: 4f3174a6 2016-10-06 10:25:38,344 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-113) [] Query 'GetVmsFromExternalProviderQuery' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key verification failed.: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) 2016-10-06 10:25:38,345 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-113) [] Exception: org.ovirt.engine.core.common.errors.EngineException: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key verification failed.: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103) [bll.jar:] at org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33) [dal.jar:] at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529) [bll.jar:] at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13) [bll.jar:] at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) [weld-core-impl-2.3.2.Final.jar:2.3.2.Final] at org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45) [wildfly-ee-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636) at org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195) at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73) at org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown Source) [common.jar:] at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53) at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196) at com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172) at com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233) at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129) at org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132) at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73) [branding.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84) at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62) at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36) at org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131) at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51) at io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46) at io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64) at io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56) at io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60) at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77) at io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50) at io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284) at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263) at io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81) at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174) at io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) at io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) [rt.jar:1.8.0_102] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) [rt.jar:1.8.0_102] at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102] 2016-10-06 10:25:52,527 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] START, GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm03-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='02ead14e-0208-4a74-b1c2-4c19383820f9', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'}), log id: 7c8b1e2d 2016-10-06 10:26:02,695 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer] 2016-10-06 10:26:02,695 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Failed in 'GetVmsFromExternalProviderVDS' method 2016-10-06 10:26:02,696 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer] 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-118) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM hlg-rbs-ovirt-kvm03-poa.rbs.com.br command failed: Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer 2016-10-06 10:26:02,701 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@5ce9f7f2' 2016-10-06 10:26:02,701 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] HostName = hlg-rbs-ovirt-kvm03-poa.rbs.com.br 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Command 'GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm03-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='02ead14e-0208-4a74-b1c2-4c19383820f9', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'})' execution failed: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 2016-10-06 10:26:02,701 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id: 7c8b1e2d 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-118) [] Query 'GetVmsFromExternalProviderQuery' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-118) [] Exception: org.ovirt.engine.core.common.errors.EngineException: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103) [bll.jar:] at org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33) [dal.jar:] at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529) [bll.jar:] at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13) [bll.jar:] at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) [weld-core-impl-2.3.2.Final.jar:2.3.2.Final] at org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45) [wildfly-ee-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636) at org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195) at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73) at org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown Source) [common.jar:] at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53) at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196) at com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172) at com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233) at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129) at org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132) at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73) [branding.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84) at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62) at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36) at org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131) at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51) at io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46) at io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64) at io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56) at io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60) at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77) at io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50) at io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284) at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263) at io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81) at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174) at io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) at io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) [rt.jar:1.8.0_102] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) [rt.jar:1.8.0_102] at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102] ^C [root@hlg-rbs-ovirt01-poa ~]# When i try with virsh i have sucess. [root@hlg-rbs-ovirt-kvm01-poa ~]# virsh -c qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system The authenticity of host 'prd-openshift-kvm03-poa.rbs.com.br (10.1.8.32)' can't be established. ECDSA key fingerprint is af:e9:12:29:65:ad:41:ab:0a:3c:a1:f0:73:1c:62:a5. Are you sure you want to continue connecting (yes/no)? yes root(a)prd-openshift-kvm03-poa.rbs.com.br's password: Welcome to virsh, the virtualization interactive terminal. Type: 'help' for help with commands 'quit' to quit virsh # list Id Name State ---------------------------------------------------- 5 prd-openshift-etcd03-poa running 6 prd-openshift-master03-poa running 8 prd-openshift-node03-poa running virsh # list --all Id Name State ---------------------------------------------------- 5 prd-openshift-etcd03-poa running 6 prd-openshift-master03-poa running 8 prd-openshift-node03-poa running - teste shut off - teste1 shut off - tpl-centos72-64 shut off virsh # quit [root@hlg-rbs-ovirt-kvm01-poa ~]# Thanks.

3 2

Libvirt ERROR cannot access backing file after importing VM from OpenStack
by Vrgotic, Marko 15 May '19

15 May '19

Dear oVirt team, When trying to start imported VM, it fails with following message: ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-2) [] EVENT_ID: VM_DOWN_ERROR(119), VM instance-00000673 is down with error. Exit message: Cannot access backing file '/var/lib/nova/instances/_base/2f4f8c5fc11bb83bcab03f4c829ddda4da8c0bce' of storage file '/rhev/data-center/mnt/glusterSD/aws-gfs-01.awesome.lan:_gv0__he/2607c265-248c-40ad-b020-f3756454839e/images/816ac00f-ba98-4827-b5c8-42a8ba496089/8ecfcd5b-db67-4c23-9869-0e20d7553aba' (as uid:107, gid:107): No such file or directory. Platform details: Ovirt SHE Version 4.2.2.6-1.el7.centos GlusterFS, unmanaged by oVirt. VM is imported & converted from OpenStack, according to log files, successfully (one WARN, related to different MAC address): 2018-05-24 12:03:31,028+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsNamesFromExternalProviderVDSCommand] (default task-29) [cc5931a2-1af5-4d65-b0b3-362588db9d3f] FINISH, GetVmsNamesFromExternalProviderVDSCommand, return: [VM [instance-0001f94c], VM [instance-00078f6a], VM [instance-00000814], VM [instance-0001f9ac], VM [instance-000001ff], VM [instance-0001f718], VM [instance-00000673], VM [instance-0001ecf2], VM [instance-00078d38]], log id: 7f178a5e 2018-05-24 12:48:33,722+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsNamesFromExternalProviderVDSCommand] (default task-8) [103d56e1-7449-4853-ae50-48ee94d43d77] FINISH, GetVmsNamesFromExternalProviderVDSCommand, return: [VM [instance-0001f94c], VM [instance-00078f6a], VM [instance-00000814], VM [instance-0001f9ac], VM [instance-000001ff], VM [instance-0001f718], VM [instance-00000673], VM [instance-0001ecf2], VM [instance-00078d38]], log id: 3aa178c5 2018-05-24 12:48:47,291+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFullInfoFromExternalProviderVDSCommand] (default task-17) [4bf555c7-9d64-4ecc-b059-8a60a4b27bdd] START, GetVmsFullInfoFromExternalProviderVDSCommand(HostName = aws-ovhv-01, GetVmsFromExternalProviderParameters:{hostId='cbabe1e8-9e7f-4c4b-be9c-49154953564d', url='qemu+tcp://root@172.19.0.12/system', username='null', originType='KVM', namesOfVms='[instance-00000673]'}), log id: 4c445109 2018-05-24 12:48:47,318+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFullInfoFromExternalProviderVDSCommand] (default task-17) [4bf555c7-9d64-4ecc-b059-8a60a4b27bdd] FINISH, GetVmsFullInfoFromExternalProviderVDSCommand, return: [VM [instance-00000673]], log id: 4c445109 2018-05-24 12:49:20,466+02 INFO [org.ovirt.engine.core.bll.exportimport.ImportVmFromExternalProviderCommand] (default task-41) [14edb003-b4a0-4355-b3de-da2b68774fe3] Lock Acquired to object 'EngineLock:{exclusiveLocks='[instance-00000673=VM_NAME, 1f0b608f-7cfc-4b27-a876-b5d8073011a1=VM]', sharedLocks=''}' 2018-05-24 12:49:20,586+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653408) [14edb003-b4a0-4355-b3de-da2b68774fe3] EVENT_ID: MAC_ADDRESS_IS_EXTERNAL(925), VM instance-00000673 has MAC address(es) fa:16:3e:74:18:50, which is/are out of its MAC pool definitions. 2018-05-24 12:49:21,021+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653408) [14edb003-b4a0-4355-b3de-da2b68774fe3] EVENT_ID: IMPORTEXPORT_STARTING_IMPORT_VM(1,165), Starting to import Vm instance-00000673 to Data Center AVEUNL, Cluster AWSEUOPS 2018-05-24 12:49:28,816+02 INFO [org.ovirt.engine.core.bll.exportimport.ImportVmFromExternalProviderCommand] (EE-ManagedThreadFactory-engine-Thread-653407) [] Lock freed to object 'EngineLock:{exclusiveLocks='[instance-00000673=VM_NAME, 1f0b608f-7cfc-4b27-a876-b5d8073011a1=VM]', sharedLocks=''}' 2018-05-24 12:49:28,911+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ConvertVmVDSCommand] (EE-ManagedThreadFactory-commandCoordinator-Thread-2) [2047673e] START, ConvertVmVDSCommand(HostName = aws-ovhv-01, ConvertVmVDSParameters:{hostId='cbabe1e8-9e7f-4c4b-be9c-49154953564d', url='qemu+tcp://root@172.19.0.12/system', username='null', vmId='1f0b608f-7cfc-4b27-a876-b5d8073011a1', vmName='instance-00000673', storageDomainId='2607c265-248c-40ad-b020-f3756454839e', storagePoolId='5a5de92c-0120-0167-03cb-00000000038a', virtioIsoPath='null', compatVersion='null', Disk0='816ac00f-ba98-4827-b5c8-42a8ba496089'}), log id: 53408517 2018-05-24 12:49:29,010+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-commandCoordinator-Thread-2) [2047673e] EVENT_ID: IMPORTEXPORT_STARTING_CONVERT_VM(1,193), Starting to convert Vm instance-00000673 2018-05-24 12:52:57,982+02 INFO [org.ovirt.engine.core.bll.UpdateVmCommand] (default task-16) [df1d5f72-eb17-46e4-9946-20ca9809b54c] Failed to Acquire Lock to object 'EngineLock:{exclusiveLocks='[instance-00000673=VM_NAME]', sharedLocks='[1f0b608f-7cfc-4b27-a876-b5d8073011a1=VM]'}' 2018-05-24 12:59:24,575+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-20) [2047673e] EVENT_ID: IMPORTEXPORT_IMPORT_VM(1,152), Vm instance-00000673 was imported successfully to Data Center AVEUNL, Cluster AWSEUOPS Than trying to start VM fails with following messages: 2018-05-24 13:00:32,085+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653729) [] EVENT_ID: USER_STARTED_VM(153), VM instance-00000673 was started by admin@internal-authz (Host: aws-ovhv-06). 2018-05-24 13:00:33,417+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-9) [] VM '1f0b608f-7cfc-4b27-a876-b5d8073011a1'(instance-00000673) moved from 'WaitForLaunch' --> 'Down' 2018-05-24 13:00:33,436+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-9) [] EVENT_ID: VM_DOWN_ERROR(119), VM instance-00000673 is down with error. Exit message: Cannot access backing file '/var/lib/nova/instances/_base/2f4f8c5fc11bb83bcab03f4c829ddda4da8c0bce' of storage file '/rhev/data-center/mnt/glusterSD/aws-gfs-01.awesome.lan:_gv0__he/2607c265-248c-40ad-b020-f3756454839e/images/816ac00f-ba98-4827-b5c8-42a8ba496089/8ecfcd5b-db67-4c23-9869-0e20d7553aba' (as uid:107, gid:107): No such file or directory. 2018-05-24 13:00:33,437+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-9) [] add VM '1f0b608f-7cfc-4b27-a876-b5d8073011a1'(instance-00000673) to rerun treatment 2018-05-24 13:00:33,455+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653732) [] EVENT_ID: USER_INITIATED_RUN_VM_FAILED(151), Failed to run VM instance-00000673 on Host aws-ovhv-06. 2018-05-24 13:00:33,460+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653732) [] EVENT_ID: USER_FAILED_RUN_VM(54), Failed to run VM instance-00000673 (User: admin@internal-authz). Checking on the Gluster volume, directory and files exist, permissions are in order: [root@aws-ovhv-01 816ac00f-ba98-4827-b5c8-42a8ba496089] -rw-rw----. 1 vdsm kvm 14G May 24 12:59 8ecfcd5b-db67-4c23-9869-0e20d7553aba -rw-rw----. 1 vdsm kvm 1.0M May 24 12:49 8ecfcd5b-db67-4c23-9869-0e20d7553aba.lease -rw-r--r--. 1 vdsm kvm 310 May 24 12:49 8ecfcd5b-db67-4c23-9869-0e20d7553aba.meta Than I have checked image info, and noticed that backing file entry is pointing to non-existing location, which does and should not exist on oVirt hosts: [root@aws-ovhv-01 816ac00f-ba98-4827-b5c8-42a8ba496089]# qemu-img info 8ecfcd5b-db67-4c23-9869-0e20d7553aba image: 8ecfcd5b-db67-4c23-9869-0e20d7553aba file format: qcow2 virtual size: 160G (171798691840 bytes) disk size: 14G cluster_size: 65536 backing file: /var/lib/nova/instances/_base/2f4f8c5fc11bb83bcab03f4c829ddda4da8c0bce Format specific information: compat: 1.1 lazy refcounts: false refcount bits: 16 corrupt: false Can somebody advise me how to fix, address this, as I am in need of importing 200+ VMs from OpenStack to oVirt? Kindly awaiting your reply. Marko Vrgotic

7 36

Change host names/IPs
by Davide Ferrari 15 May '19

15 May '19

Hello Is there a clean way and possibly without downtime to change the hostname and IP addresses of all the hosts in a running oVirt cluster? -- Davide Ferrari Senior Systems Engineer

4 7

[Users] Lifecycle / upgradepath
by Sven Kieske 11 May '19

11 May '19

Hi Community, Currently, there is no single document describing supported (which means: working ) upgrade scenarios. I think the project has matured enough, to have such an supported upgradepath, which should be considered in the development of new releases. As far as I know, currently it is supported to upgrade from x.y.z to x.y.z+1 and from x.y.z to x.y+1.z but not from x.y-1.z to x.y+1.z directly. maybe this should be put together in a wiki page at least. also it would be cool to know how long a single "release" would be supported. In this context I would define a release as a version bump from x.y.z to x.y+1.z or to x+1.y.z a bump in z would be a bugfix release. The question is, how long will we get bugfix releases for a given version? What are your thoughts? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

2 1

[Users] Nested virtualization with Opteron 2nd generation and oVirt 3.1 possible?
by Gianluca Cecchi 11 May '19

11 May '19

Hello, I have 2 physical servers with Opteron 2nd gen cpu. There is CentOS 6.3 installed and some VM already configured on them. Their /proc/cpuinfo contains ... model name : Dual-Core AMD Opteron(tm) Processor 8222 ... kvm_amd kernel module is loaded with its default enabled nested option # systool -m kvm_amd -v Module = "kvm_amd" Attributes: initstate = "live" refcnt = "15" srcversion = "43D8067144E7D8B0D53D46E" Parameters: nested = "1" npt = "1" ... I already configured a fedora 17 VM as a oVirt 3.1 Engine I'm trying to configure another VM as oVirt 3.1 node with ovirt-node-iso-2.5.5-0.1.fc17.iso It seems I'm not able to configure so that ovirt install doesn't complain. After some attempts, I tried this in my vm.xml for the cpu: <cpu mode='custom' match='exact'> <model fallback='allow'>athlon</model> <vendor>AMD</vendor> <feature policy='require' name='pni'/> <feature policy='require' name='rdtscp'/> <feature policy='force' name='svm'/> <feature policy='require' name='clflush'/> <feature policy='require' name='syscall'/> <feature policy='require' name='lm'/> <feature policy='require' name='cr8legacy'/> <feature policy='require' name='ht'/> <feature policy='require' name='lahf_lm'/> <feature policy='require' name='fxsr_opt'/> <feature policy='require' name='cx16'/> <feature policy='require' name='extapic'/> <feature policy='require' name='mca'/> <feature policy='require' name='cmp_legacy'/> </cpu> Inside node /proc/cpuinfo becomes processor : 3 vendor_id : AuthenticAMD cpu family : 6 model : 2 model name : QEMU Virtual CPU version 0.12.1 stepping : 3 microcode : 0x1000065 cpu MHz : 3013.706 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall mmxext fxsr_opt lm nopl pni cx16 hypervisor lahf_lm cmp_legacy cr8_legacy bogomips : 6027.41 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: 2 questions: 1) Is there any combination in xml file to give to my VM so that oVirt doesn't complain about missing hardware virtualization with this processor? 2) suppose 1) is not possible in my case and I still want to test the interface and try some config operations to see for example the differences with RHEV 3.0, how can I do? At the moment this complaint about hw virtualization prevents me to activate the node. I get Installing Host f17ovn01. Step: RHEV_INSTALL. Host f17ovn01 was successfully approved. Host f17ovn01 running without virtualization hardware acceleration Detected new Host f17ovn01. Host state was set to Non Operational. Host f17ovn01 moved to Non-Operational state. Host f17ovn01 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags Can I lower the requirements to be able to operate without hw virtualization in 3.1? Thanks in advance, Gianluca

2 1

Need VM run once api
by Chandrahasa S 09 May '19

09 May '19

This is a multipart message in MIME format. --=_alternative 00361B2065257E90_= Content-Type: text/plain; charset="US-ASCII" Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00361B2065257E90_= Content-Type: text/html; charset="US-ASCII" <font size=2 face="sans-serif">Hi Experts,</font> <br> <br><font size=2 face="sans-serif">We are integrating ovirt with our internal cloud.</font> <br> <br><font size=2 face="sans-serif">Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS.</font> <br> <br><font size=2 face="sans-serif">but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal.</font> <br> <br><font size=2 face="sans-serif">I believe we need to power ON vm using run once API, but we are not able get this API.</font> <br> <br><font size=2 face="sans-serif">Can some one help on this.</font> <br> <br><font size=2 face="sans-serif">I got reply on this query last time but unfortunately mail got deleted.</font> <br> <br><font size=2 face="sans-serif">Thanks & Regards<br> Chandrahasa S<br> </font><p>=====-----=====-----=====<br> Notice: The information contained in this e-mail<br> message and/or attachments to it may contain <br> confidential or privileged information. If you are <br> not the intended recipient, any dissemination, use, <br> review, distribution, printing or copying of the <br> information contained in this e-mail message <br> and/or attachments to it are strictly prohibited. If <br> you have received this communication in error, <br> please notify us by reply e-mail or telephone and <br> immediately and permanently delete the message <br> and any attachments. Thank you</p> <p></p> --=_alternative 00361B2065257E90_=--

5 4

Ovirt Nested in VMWare (Working approach)
by RabidCicada 30 Apr '19

30 Apr '19

I worked through this previously and posted in IRC yesterday about working around running ovirt nested under VMWare. I figured i'd post it to the mail group so that it would be available in it's entirety here for future reference: The following gists explain the 3 major adjustments that have to be made currently to get nested virt under vmware working: https://gist.github.com/RabidCicada/993349b3a7eaf35637122f0122fdedb3 https://gist.github.com/RabidCicada/bc01eb0b13195faa26520c0fb666ec34 https://gist.github.com/RabidCicada/37ff6f1ed2afd8dd4edefac735536c69 https://gist.github.com/RabidCicada/40655db1582ca5d07c9bbf2c429cdd01 Hopefully it can save others the huge amount of time it took me to figure it all out. Specifically it's a problem with the --machine type at 3 major parts of the vm creation for the hosted-engine. 1) You have to fix the virt-install to use --machine pc-i440fx-rhel7.2.0 2) You have to fix the guestfish spinup of the partially configured vm to use --machine pc-i440fx-rhel7.2.0, where they edit the nic config among other things 3) You have to tell vdsm on the node to use --machine pc-i440fx-rhel7.2.0 I don't know the underlying reason why a --machine type > pc-i440fx-rhel7.2.0 breaks the system but it ends up resulting in a bios freeze. Again, Hope this helps someone. Suggested only to use for a test/dev system.

2 1

[Users] importing from kvm into ovirt
by Jonathan Horne 29 Apr '19

29 Apr '19

--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable I need to import a kvm virtual machine from a standalone kvm into my ovirt = cluster. Standalone is using local storage, and my ovirt cluster is using = iscsi. Can i please have some advice on whats the best way to get this sys= tem into ovirt? Right now i see it as copying the .img file to somewhere=85 but i have no i= dea where to start. I found this directory on one of my ovirt nodes: /rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/master/v= ms But inside is just directories that appear to have uuid-type of names, and = i can't tell what belongs to which vm. Any advice would be greatly appreciated. Thanks, jonathan ________________________________ This is a PRIVATE message. If you are not the intended recipient, please de= lete without copying and kindly advise us by e-mail of the mistake in deliv= ery. NOTE: Regardless of content, this e-mail shall not operate to bind SKO= POS to any order or other contract unless pursuant to explicit written agre= ement or government initiative expressly permitting the use of e-mail for s= uch purpose. --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/html; charset="Windows-1252" Content-ID: <41FAB2B157C43549B6577A3495BA255C(a)collaborationhost.net> Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1= 252"> </head> <body style=3D"word-wrap:break-word; color:rgb(0,0,0); font-size:14px; font= -family:Calibri,sans-serif"> <div> <div> <div>I need to import a kvm virtual machine from a standalone kvm into my o= virt cluster.  Standalone is using local storage, and my ovirt cluster= is using iscsi.  Can i please have some advice on whats the best way = to get this system into ovirt?</div> </div> </div> <div><br> </div> <div>Right now i see it as copying the .img file to somewhere=85 but i have= no idea where to start.  I found this directory on one of my ovirt no= des:</div> <div><br> </div> <div>/rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/mas= ter/vms</div> <div><br> </div> <div>But inside is just directories that appear to have uuid-type of names,= and i can't tell what belongs to which vm.</div> <div><br> </div> <div>Any advice would be greatly appreciated.</div> <div><br> </div> <div>Thanks,</div> <div>jonathan</div> <br> <hr> <font color=3D"Gray" face=3D"Arial" size=3D"1">This is a PRIVATE message. I= f you are not the intended recipient, please delete without copying and kin= dly advise us by e-mail of the mistake in delivery. NOTE: Regardless of con= tent, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit wri= tten agreement or government initiative expressly permitting the use of e-m= ail for such purpose.</font> </body> </html> --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_--

3 2

oVirt Node 4.3 Master on fc28
by femi adegoke 12 Apr '19

12 Apr '19

4.3 Master is looking good!! A few questions: - In Step #2: Fqdns: for a 3 host cluster, are we to add the 2nd & 3rd hosts? - In Step #5: Bricks: What effect does the RAID setting have? Enable Dedupe & Compression is new? Configure LV Cache: what do we enter for SSD? What happens if my disks are already all SSD, do I still benefit from using this?

4 11

Trying to reset password for ovirt wiki
by noc 08 Apr '19

08 Apr '19

This is a multi-part message in MIME format. --------------000005070002050708050606 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hoping someone can help me out. For some reason I keep getting the following error when I try to reset my password: Reset password * Error sending mail: Failed to add recipient: jvandewege(a)nieuwland.nl [SMTP: Invalid response code received from server (code: 554, response: 5.7.1 <jvandewege(a)nieuwland.nl>: Relay access denied)] Complete this form to receive an e-mail reminder of your account details. Since I receive the ML on this address it is definitely a working address. Tried my home account too and same error but then for my home provider, Relay denied ?? A puzzled user, Joop --------------000005070002050708050606 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hoping someone can help me out.<br> For some reason I keep getting the following error when I try to reset my password:<br> <br> <fieldset><legend>Reset password</legend> <div class="error"> <ul> <li>Error sending mail: Failed to add recipient: <a class="moz-txt-link-abbreviated" href="mailto:jvandewege@nieuwland.nl">jvandewege(a)nieuwland.nl</a> [SMTP: Invalid response code received from server (code: 554, response: 5.7.1 <a class="moz-txt-link-rfc2396E" href="mailto:jvandewege@nieuwland.nl"><jvandewege(a)nieuwland.nl></a>: Relay access denied)]</li> </ul> </div> <p>Complete this form to receive an e-mail reminder of your account details.<br> </p> </fieldset> <br> Since I receive the ML on this address it is definitely a working address.<br> Tried my home account too and same error but then for my home provider, Relay denied ??<br> <br> A puzzled user,<br> <br> Joop<br> <br> </body> </html> --------------000005070002050708050606--

2 1

ovirt-guest-agent issue on rhel5.5
by John Michael Mercado 08 Apr '19

08 Apr '19

Hi All, I need your help. Anyone who encounter the below error and have the solution? Can you help me how to fix this? MainThread::INFO::2015-01-27 10:22:53,247::ovirt-guest-agent::57::root::Starting oVirt guest agent MainThread::ERROR::2015-01-27 10:22:53,248::ovirt-guest-agent::138::root::Unhandled exception in oVirt guest agent! Traceback (most recent call last): File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 132, in ? agent.run(daemon, pidfile) File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 63, in run self.agent = LinuxVdsAgent(config) File "/usr/share/ovirt-guest-agent/GuestAgentLinux2.py", line 371, in __init__ AgentLogicBase.__init__(self, config) File "/usr/share/ovirt-guest-agent/OVirtAgentLogic.py", line 171, in __init__ self.vio = VirtIoChannel(config.get("virtio", "device")) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 150, in __init__ self._stream = VirtIoStream(vport_name) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 131, in __init__ self._vport = os.open(vport_name, os.O_RDWR) OSError: [Errno 2] No such file or directory: '/dev/virtio-ports/com.redhat.rhevm.vdsm' Thanks

2 1

[Users] oVirt Workshop at LinuxCon Japan 2012
by Leslie Hawthorn 08 Apr '19

08 Apr '19

Hello everyone, As part of our efforts to raise awareness of and educate more developers about the oVirt project, we will be holding an oVirt workshop at LinuxCon Japan, taking place on June 8, 2012. You can find full details of the workshop agenda on the LinuxCon Japan site. [0] Registration for the workshop is now open and is free of charge for the first 50 participants. We will also look at adding additional participant slots to the workshop based on demand. Attendees who register for LinuxCon Japan via the workshop registration link [1] will also be eligible for a discount on their LinuxCon Japan registration. Please spread the word to folks you think would find the workshop useful. If they have already registered for LinuxCon Japan, they can simply edit their existing registration to include the workshop. [0] - https://events.linuxfoundation.org/events/linuxcon-japan/ovirt-gluster-work… [1] - http://www.regonline.com/Register/Checkin.aspx?EventID=1099949 Cheers, LH -- Leslie Hawthorn Community Action and Impact Open Source and Standards @ Red Hat identi.ca/lh twitter.com/lhawthorn

2 1

[Users] Moving iSCSI Master Data
by rni＠chef.net 07 Apr '19

07 Apr '19

--========GMXBoundary282021374122634158505 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Hi, it's me again.... I started my oVirt 'project' as a proof of concept,.. but it happend as always, it became production Now, I've to move the iSCSI Master data to the real iSCSI traget. Is there any way to do this, and to become rid of the old Master Data? Thank you for your help Hans-Joachim --========GMXBoundary282021374122634158505 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable <span style=3D'font-family:Verdana'><span style=3D'font-size:12px'>Hi,<br /= ><br />it's me again....<br /><br />I started my oVirt 'project' as a proof= of concept,.. but it happend as always, it became production <img alt= =3D" " title=3D" " src=3D"http://images.gmx.com/images/outsource/applicatio= n/mailclient/mailcom/resource/mailclient/icons/blue/emoticons/animated/S_02= -516742918.gif" /><br /><br />Now, I've to move the iSCSI Master data to th= e real iSCSI traget.<br />Is there any way to do this, and to become rid of= the old Master Data?<br /><br /><span id=3D"editor_signature">Thank you fo= r your help</span><br /><br />Hans-Joachim</span></span> --========GMXBoundary282021374122634158505--

3 2

[Users] Can't access RHEV-H aka ovirt-node
by Scotto Alberto 11 Mar '19

11 Mar '19

--_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: multipart/alternative; boundary="_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_" --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi all, I can't login to the hypervisor, neither as root nor as admin, neither from= another computer via ssh nor directly on the machine. I'm sure I remember the passwords. This is not the first time it happens: l= ast time I reinstalled the host. Everything worked ok for about 2 weeks, an= d then... What's going on? Is it a known behavior, somehow? Before rebooting the hypervisor, I would like to try something. RHEV Manage= r talks to RHEV-H without any problems. Can I login with RHEV-M's keys? how= ? Thank you all. Alberto Scotto [Blue] Via Cardinal Massaia, 83 10147 - Torino - ITALY phone: +39 011 29100 al.scotto(a)reply.it www.reply.it ________________________________ -- The information transmitted is intended for the person or entity to which i= t is addressed and may contain confidential and/or privileged material. Any= review, retransmission, dissemination or other use of, or taking of any ac= tion in reliance upon, this information by persons or entities other than t= he intended recipient is prohibited. If you received this in error, please = contact the sender and delete the material from any computer. --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <style>  </style> </head> <body lang=3D"IT" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> <p class=3D"MsoNormal"><span lang=3D"EN-US">Hi all,</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">I can’t login to the hype= rvisor, neither as root nor as admin, neither from another computer via ssh= nor directly on the machine.</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">I’m sure I remember the p= asswords. This is not the first time it happens: last time I reinstalled th= e host. Everything worked ok for about 2 weeks, and then...</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">What’s going on? Is it a = known behavior, somehow?</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">Before rebooting the hypervisor= , I would like to try something. RHEV Manager talks to RHEV-H without any p= roblems. Can I login with RHEV-M’s keys? how?</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US"> </span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">Thank you all.</span></p> </div> <br> <br> <div align=3D"left"> <p style=3D"font-family:Calibri,Sans-Serif; font-size:10pt"><span style=3D"= color:#000000; font-weight:bold">Alberto Scotto</span> <span style=3D"color:#808080"></span><br> <br> <span style=3D"color:#000000"><img border=3D"0" alt=3D"Blue" src=3D"cid:bde= 5ac62d10545908e269a6006dbd5ac" style=3D"margin:0px"> </span><br> <span style=3D"color:#808080">Via Cardinal Massaia, 83<br> 10147 - Torino - ITALY <br> phone: +39 011 29100 <br> <a href=3D"al.scotto(a)reply.it" target=3D"" style=3D"color:blue; text-decora= tion:underline">al.scotto(a)reply.it</a> <br> <a title=3D"" href=3D"www.reply.it" target=3D"" style=3D"color:blue; text-d= ecoration:underline">www.reply.it</a> </span><br>  </p> </div> <br> <hr> <font face=3D"Arial" color=3D"Gray" size=3D"1"><br> --<br> The information transmitted is intended for the person or entity to which i= t is addressed and may contain confidential and/or privileged material. Any= review, retransmission, dissemination or other use of, or taking of any ac= tion in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If= you received this in error, please contact the sender and delete the mater= ial from any computer.<br> </font> </body> </html> --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_-- --_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: image/png; name="blue.png" Content-Description: blue.png Content-Disposition: inline; filename="blue.png"; size=2834; creation-date="Tue, 11 Sep 2012 14:14:44 GMT"; modification-date="Tue, 11 Sep 2012 14:14:44 GMT" Content-ID: <bde5ac62d10545908e269a6006dbd5ac> Content-Transfer-Encoding: base64 iVBORw0KGgoAAAANSUhEUgAAAIwAAAAyCAYAAACOADM7AAAABmJLR0QA/gD+AP7rGNSCAAAACXBI WXMAAA3XAAAN1wFCKJt4AAAACXZwQWcAAACMAAAAMgCR0D3bAAAKaUlEQVR42u2ce5AUxRnAf313 3Al4eCAYFaIgyMNEUF6KlYoVIDBArDxqopWxQgViQlWsPHA0MUlZVoyKRsdSE4lGomjIaHS0UlHL wTIPpEgQFQUUjYIWdfIIScyBHi/Z6/zRM1xP3yzs7t3unOX8qra2H9M9vb3f9Pf19/WukFKSk1Mq dVkPIOejRS4wOWXR6wVGuP5I4foDsh5HjkL0VhtGuP5A4CFgNrAD+Lb0nKeyHtfHnd68wixGCQvA qcA9wvWPy3pQH3caan1D4fonAYeBDwEZjaFflAaok56zHRhsNG0B+gAHSrhHarn0nFp/3NLnxbKP B06I5kECO2UYZD2sLtRcYIBJwK+BoYBACU89cAjoAIRw/TuAJcClQGy//FJ6zvvH6ly4/qXAz4vU HQA2A4H0nIcz+OxH41eAHaU3AhdkPaA0MrFhhOuPB2YA5wBnA6ehni5dgKcBu4C5wLZS7Rfh+g8A 80u49HHgEuk5h2s+AeaYLbsO2AKMiIqWyzBYkPW40shihUF6zkbUUwSAcP0G4FHgS9pl10rPmQMs LbXfSBVNLPHyrwDfBO7JYg4MRqEempjnsh5QMXqL0Xsl8EUt3w5cXUE/w4AztfzzwGSUGrwoyuvM yfqDR5yLUssxL2U9oGJkssLoCNdfjLJXdBZIz9lQQXcTgSYt/4z0nHjy1wvX3wW8oNX3O8q4TgKm AGegjNB/As9JzzmYer1lTwKGoOyyV2UYtArLngLMQ9lh64EVRQxZ3V5pje4V9zsVGBRl22QYrDXu e0HUvwD+K8NgXbe/lKOQqcAI178MuM0ovk16zqMVdjnNyL9g5E2DrTVlTP1RRvM3gIFG9RvC9RdK z/lHoo2yQQJgeFR0hbDsT6FUns544Icp456qpV+RYaAL5RJgepR+FWXzxfcdA6zRrr0SqKrAZKaS hOt/DbjXKH5Geo7bjW71iT8AvGLUzzXyfzfGNBBlPyymq7AAjAWeFK5/slE+AvhklC4At6KEZb9x 3cJo+9x5T8s+ERinFa012uzU0vuMuu9r6W3AXd2Yu5LIRGCE618E/D6l6rpu9Hk8MEEr2iQ9p1Wr n4wShJgPgCeMbh6g02jeB9wILASe1q4ZBHzBaDeRThukHghRdskoQF+NmlH+JJ0JqB1ijCkw72np jiOfx7JPQrkdYm6QYXBMH1V3qYlKEq7fhNLvw1CTeztK55rcJlz/s8XshGPwaeBELd8sXP961Bd4 Bsqo1u2bm6Tn7NbGeCHKMI6ZLz3nsajuT6gtfjxfpxr31lXhThkG8470a9mrtPp2uq4652np94FN Rr0uMM1a+jI6fVTvAMsrmLOy6VGBEa5fB3wOpctHaK9TgVOAxmN0MRXlwPpWBbefYuTHAj8tcu39 0nNuMMq+qqXfjoUl4mSSq/HbRlv9S3/ZqBumpXcB/zPqz9fSm2UY/Nuo1wWmCUBYdiPwHa3ck2Hw YQVzVjbVWGFmkW7YmewDfga8CNwHnB6VXyZcf7X0nAfLvG8pntE3gSXSc5an1Olf+hDh+i+jVieJ UiOxwBSiMQMgLLsFOEtr+7xWB8rQjdkgw0BXK40o1RWTZrDu0dKx0X4xylMOynZZVuZcVUyPCoz0 nA7gR8L1N6FWmQIqZtRGpwoSwF7gRek5WwCE658P3A9Y0TV3C9ffUOrWOlrZdIfdXuBhlCqaqZU/ myYs0RZaNzybUV7oNFqBt7T8BJJ2iW6zDAPGFKkDGE1yBTLtF0gKTCF6/4FWtsTYVVWVqtgw0nNW lHn9LmCOcP2bgKuAvsAtqNWqFGLVF7NGes4i4fpjgNfpFNbzi7QfD/TX8vtQMa40VkvPKWh5fWfW DuhCfg5Ju8nc5k/RxpZYuTR0gWkTlj0D5YgEeJca2S4xvcXTC4D0nKvpdNWXc2hqEiqSHROrhR0k bYAzhesPTmmvG61tKAE6PXoNRRnTg6OX6VvRhfB1GQa7tbyu5v6D8qNQpH4bsDVlbLrADACu0fK/ qOXqAr1MYCLip7AcI+48I78WIIpuv6mVN5NUPWntN0nP2So9p016ThtwEKU6RpIMOyAsuw9JVWiu INO19AYZBma0fbKWXi/DoEBX9tBpu4wDLozS2+jqx6o6vVFgYt+JKKON/pTvJ6kWzKc6LTg5XEtv MeruAF5DqbZVgH6IayTJoOHf4oSw7LNICuKTeqfCsj9BUnhN+yamPXqZc3JrLfwuJpnHklKIBaa+ lIuF67eQ3KW8HtlEMabhPCmlG/3JnhX5ZHaifDeLtLqlxpmcySQfuvnCstdH6WXaZ9iPMsJ1xpOM ZaXZL6DsqfcB3UO8A7WzrDm9T2DqG7dTOHSIEgUGIc5GyhatZJ1Rv4HkmZ/xKb08o5UPRa0UkuQT vY6uQVJTFc5D7fQ6SNpUN8ow2GVcq7sB2ugq2DGHUYfLdG6SYbCPDMhcYIRlJwWjcGg/Z1/yATBE zJxXT0Pf4o0P7pWcO39W4nuVHS+JGfPq6dMXOjpgzNyt9En0MUF877fDee3x1iPlo2beTOPxnwGh qzahuhUAjwCLpOeYKkDfIT2BUl1XkxT2+2QYXJ8yen0H+JYMgz2kY9o126mh38UkITBRYGwp5e1Q usNjwL/Ql3VRX2D35mUI0UB90wyOZmc19i+wa+NB+vTrnMA9re00RO3q6iRbVtYxeOzt1NXHS3od e96dRkPT6CN9v/HUIRr738Dg0bMRDSdQVzeAjsJh+ra8SfMpf5S3XNzFoSYsewhJVbhKhoEnLDtE HV4vRGXPprQFFTdrRklk2u4opoVkyMOTYbCfjEgc0RSWPQhlQ/SruMfymCrD4IXud1N7In+ILgzT ZRj8tYfvcSLwOzoPer0DjKv1VlrHVEltqBhMafZD99mR1QfvAXT1tYfiNkhZCMvuD1yLCtbORsXg Yi7PUljAEJgoztFaYV8fN8yg4XsV95TkLJS32+QaGQZPl9tZT5O50ftRJLL1Pq8V9cjqEjHdyG8D rpdhkJmhq5MLTGX0QR2diLdnYQ/2vRq1wsRe6nUyDNq712XP0Wt/W53TO+mNoYGcXkwuMDll0eM2 TPRbnGnAvaaDSVj2bOA0GQY1j7Lm9AzVWGG+jIrwphlH3wXuzvpD51RONXZJ7aizLFcIyx4O3CXD IN527kUdJAJAWPbFqBXnVmHZV6FO3K+I6oahzgYPAX7T017UnMqoxgpTQAniONRJ/AeFZRc72+IA P47SPwEWAAjLbgL+jPJ1NAF/EZZd6o/sc6pINQSmARAyDL6OOm45mmSoX+cDVDiC6D0+azI0arcS FSkG9fcgORlTbcfdXtR5jqOdnpPGO3QK8nzU33KsoutvgXIyoBorjP7FN6OEsph3sE6rq9fS8RmQ RTIMTgP+QPJsbk5GVENgjgMQlv0QcDnwBp0nxgaQ/O+6dmCUsOxHUGdj459kbI/a3Sksew3qjE5L 1pOVUx2VtBJljxxAhf3v0v4TZRnKmI25ObruLdTZkvcAZBgcEpY9E3BRu6TrZBisznqycvJYUk6Z 5KGBnLLIBSanLHKBySmLXGByyiIXmJyy+D/P9uGVPOu6DAAAACh6VFh0U29mdHdhcmUAAHja801M LsrPTU3JTFRwyyxKLc8vyi5WsAAAYBUIJ4KDNosAAAAASUVORK5CYII= --_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_--

3 2

Unable to make Single Sign on working on Windows 7 Guest
by Felipe Herrera Martinez 11 Mar '19

11 Mar '19

On the case I'll be able to create an installer, what is the name of the Application need to be there, in order to ovirt detects that Ovirt Guest agent is installed? I have created an installer adding OvirtGuestService files and the Product Name to be shown, a part of the command line post installs.. I have tried with "ovirt-guest-agent" and "Ovirt guest agent" Names for the application installed on Windows 7 guest and even both are presented on ovirt VM Applications tab, on any case LogonVDScommand appears. There is other option to make it work now? Thanks in advance, Felipe

3 5

Re: [ovirt-users] Need VM run once api
by Chandrahasa S 11 Mar '19

11 Mar '19

This is a multipart message in MIME format. --=_alternative 00199D2865257E91_= Content-Type: text/plain; charset="US-ASCII" Can any one help on this. Thanks & Regards Chandrahasa S From: Chandrahasa S/MUM/TCS To: users(a)ovirt.org Date: 28-07-2015 15:20 Subject: Need VM run once api Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00199D2865257E91_= Content-Type: text/html; charset="US-ASCII" <font size=2 face="sans-serif">Can any one help on this.</font> <br> <br><font size=2 face="sans-serif">Thanks & Regards<br> Chandrahasa S<br> </font> <br> <br> <br> <br><font size=1 color=#5f5f5f face="sans-serif">From:        </font><font size=1 face="sans-serif">Chandrahasa S/MUM/TCS</font> <br><font size=1 color=#5f5f5f face="sans-serif">To:        </font><font size=1 face="sans-serif">users(a)ovirt.org</font> <br><font size=1 color=#5f5f5f face="sans-serif">Date:        </font><font size=1 face="sans-serif">28-07-2015 15:20</font> <br><font size=1 color=#5f5f5f face="sans-serif">Subject:        </font><font size=1 face="sans-serif">Need VM run once api</font> <br> <hr noshade> <br> <br><font size=2 face="sans-serif">Hi Experts,</font> <br> <br><font size=2 face="sans-serif">We are integrating ovirt with our internal cloud.</font> <br> <br><font size=2 face="sans-serif">Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS.</font> <br> <br><font size=2 face="sans-serif">but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal.</font> <br> <br><font size=2 face="sans-serif">I believe we need to power ON vm using run once API, but we are not able get this API.</font> <br> <br><font size=2 face="sans-serif">Can some one help on this.</font> <br> <br><font size=2 face="sans-serif">I got reply on this query last time but unfortunately mail got deleted.</font> <br> <br><font size=2 face="sans-serif">Thanks & Regards<br> Chandrahasa S<br> </font> <br><p>=====-----=====-----=====<br> Notice: The information contained in this e-mail<br> message and/or attachments to it may contain <br> confidential or privileged information. If you are <br> not the intended recipient, any dissemination, use, <br> review, distribution, printing or copying of the <br> information contained in this e-mail message <br> and/or attachments to it are strictly prohibited. If <br> you have received this communication in error, <br> please notify us by reply e-mail or telephone and <br> immediately and permanently delete the message <br> and any attachments. Thank you</p> <p></p> --=_alternative 00199D2865257E91_=--

3 3

Re: [ovirt-users] Problem Windows guests start in pause
by Dafna Ron 11 Mar '19

11 Mar '19

Hi Lucas, Please send mails to the list next time. can you please do rpm -qa |grep qemu. also, can you try a different windows image? Thanks, Dafna On 07/14/2014 02:03 PM, lucas castro wrote: > On the host there I've tried to run the vm, I use a centOS 6.5 > and checked, no update for qemu, libvirt or related package. -- Dafna Ron

3 3

Failed to deploy ovirt engine with "hosted-engine --deploy"
by Bong Shau Fui 11 Mar '19

11 Mar '19

Hi: I'm new to ovirt. I followed the guide at the page https://www.ovirt.org/documentation/self-hosted/chap-Deploying_Self-Hosted_…, started to run "hosted-engine --deploy". It got stuck at the stage TASK [Get local VM IP] for about 5 minutes, and failed. Did a search but came out with nothing. From the log files these 2 lines are shown: 2018-07-25 19:59:11,269+0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:94 {u'_ansible_parsed': True, u'stderr_lines': [], u'cmd': u"virsh -r net-dhcp-leases default | grep -i 00:16:3e:5e:43:32 | awk '{ print $5 }' | cut -f1 -d'/'", u'end': u'2018-07-25 19:59:11.081420', u'_ansible_no_log': False, u'stdout': u'', u'changed': True, u'invocation': {u'module_args': {u'warn': True, u'executable': None, u'_uses_shell': True, u'_raw_params': u"virsh -r net-dhcp-leases default | grep -i 00:16:3e:5e:43:32 | awk '{ print $5 }' | cut -f1 -d'/'", u'removes': None, u'argv': None, u'creates': None, u'chdir': None, u'stdin': None}}, u'start': u'2018-07-25 19:59:10.949464', u'attempts': 50, u'stderr': u'', u'rc': 0, u'delta': u'0:00:00.131956', u'stdout_lines': []} 2018-07-25 19:59:11,370+0800 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:98 fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:5e:43:32 | awk '{ print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.131956", "end": "2018-07-25 19:59:11.081420", "rc": 0, "start": "2018-07-25 19:59:10.949464", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} Can someone please enlighten me on what has happened? Many thanks in advance. regards, Bong SF

5 14

Feature: Hosted engine VM management
by Roy Golan 27 Feb '19

27 Feb '19

Hi all, Upcoming in 3.6 is enhancement for managing the hosted engine VM. In short, we want to: * Allow editing the Hosted engine VM, storage domain, disks, networks etc * Have a shared configuration for the hosted engine VM * Have a backup for the hosted engine VM configuration please review and comment on the wiki below: http://www.ovirt.org/Hosted_engine_VM_management Thanks, Roy

2 3

Re: [ovirt-users] Large DWH Database, how to empty
by Matt . 26 Feb '19

26 Feb '19

Hi, OK thanks! I saw that after upgrading to 4.0.5 from 4.0.4 the DB already dropped with around 500MB directly and is now at 2GB smaller. Does this sounds familiar to you with other settings in 4.0.5 ? Thanks, Matt 2017-01-08 10:45 GMT+01:00 Shirly Radco <sradco(a)redhat.com>: > No. That will corrupt your database. > > Are you using the full dwh or the smaller version for the dashboards? > > Please set the delete thresholds to save less data and the data older then > the time you set will be deleted. > Add a file to /ovirt-engine-dwhd.conf.d/ > update_time_to_keep_records.conf > > Add these lines with the new configurations. The numbers represent the hours > to keep the data. > > DWH_TABLES_KEEP_SAMPLES=24 > DWH_TABLES_KEEP_HOURLY=1440 > DWH_TABLES_KEEP_DAILY=43800 > > > These are the configurations for a full dwh. > > The smaller version configurations are: > DWH_TABLES_KEEP_SAMPLES=24 > DWH_TABLES_KEEP_HOURLY=720 > DWH_TABLES_KEEP_DAILY=0 > > The delete process by default at 3am every day (DWH_DELETE_JOB_HOUR=3) > > Best regards, > > Shirly Radco > > BI Software Engineer > Red Hat Israel Ltd. > 34 Jerusalem Road > Building A, 4th floor > Ra'anana, Israel 4350109 > > > On Fri, Jan 6, 2017 at 6:35 PM, Matt . <yamakasi.014(a)gmail.com> wrote: >> >> Hi, >> >> I seem to have some large database for the DWH logging and I wonder >> how I can empty it safely. >> >> Can I just simply empty the database ? >> >> Have a good weekend! >> >> Cheers, >> >> Matt >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > >

1 0

Re: [ovirt-users] Packet loss
by Doron Fediuck 26 Feb '19

26 Feb '19

----_com.android.email_640187878761650 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: base64 SGkgS3lsZSzCoApXZSBtYXkgaGF2ZSBzZWVuIHNvbWV0aGluZyBzaW1pbGFyIGluIHRoZSBwYXN0 IGJ1dCBJIHRoaW5rIHRoZXJlIHdlcmUgdmxhbnMgaW52b2x2ZWQuwqAKSXMgaXQgdGhlIHNhbWUg Zm9yIHlvdT/CoApUb255IC8gRGFuLCBkb2VzIGl0IHJpbmcgYSBiZWxsP8Kg ----_com.android.email_640187878761650 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: base64 PGh0bWw+PGhlYWQ+PG1ldGEgaHR0cC1lcXVpdj0iQ29udGVudC1UeXBlIiBjb250ZW50PSJ0ZXh0 L2h0bWw7IGNoYXJzZXQ9VVRGLTgiPjwvaGVhZD48Ym9keSA+PGRpdj5IaSBLeWxlLCZuYnNwOzwv ZGl2PjxkaXY+V2UgbWF5IGhhdmUgc2VlbiBzb21ldGhpbmcgc2ltaWxhciBpbiB0aGUgcGFzdCBi dXQgSSB0aGluayB0aGVyZSB3ZXJlIHZsYW5zIGludm9sdmVkLiZuYnNwOzwvZGl2PjxkaXY+SXMg aXQgdGhlIHNhbWUgZm9yIHlvdT8mbmJzcDs8L2Rpdj48ZGl2PlRvbnkgLyBEYW4sIGRvZXMgaXQg cmluZyBhIGJlbGw/Jm5ic3A7PC9kaXY+PC9ib2R5PjwvaHRtbD4= ----_com.android.email_640187878761650--

2 1

Using the web-ui VM portal through a proxy failing
by Callum Smith 15 Feb '19

15 Feb '19

Dear oVirt Gurus, Using the oVirt user VM portal seems to not work through the squid proxy setup (configured as per the guide). The page loads and login works fine through the proxy, but the asynchronous requests just hang. I've attached a screenshot, but you can see the "api" endpoint just hanging in a web inspector: "https://proxyfqdn/ovirt-engine/api/" [cid:CA42E493-3AD9-45F8-B4C3-C914F059390C@well.ox.ac.uk] This works fine when not going through the proxy. Is there a way to force noVNC HTML as the console mode through the web-ui, or at least have it as an option if not default? The console seems not to work when logged in with a base 'user role'. Regards, Callum -- Callum Smith Research Computing Core Wellcome Trust Centre for Human Genetics University of Oxford e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk>

2 14

sun.security.validator
by suporte＠logicworks.pt 06 Feb '19

06 Feb '19

Hi, I'm running Version 4.2.3.8-1.el7, and after reboot the engine machine no longer could login into administration portal with this error: sun.security.validator.ValidatorException: PKIX path validation faile java.security.cert.CertPathValidatorException: validity check failed I'm using a self signed cert. Any idea? Thanks -- Jose Ferradeira http://www.logicworks.pt

5 5

Ovirt cluster unstable; gluster to blame (again)
by Jim Kusznir 04 Feb '19

04 Feb '19

hi all: Once again my production ovirt cluster is collapsing in on itself. My servers are intermittently unavailable or degrading, customers are noticing and calling in. This seems to be yet another gluster failure that I haven't been able to pin down. I posted about this a while ago, but didn't get anywhere (no replies that I found). The problem started out as a glusterfsd process consuming large amounts of ram (up to the point where ram and swap were exhausted and the kernel OOM killer killed off the glusterfsd process). For reasons not clear to me at this time, that resulted in any VMs running on that host and that gluster volume to be paused with I/O error (the glusterfs process is usually unharmed; why it didn't continue I/O with other servers is confusing to me). I have 3 servers and a total of 4 gluster volumes (engine, iso, data, and data-hdd). The first 3 are replica 2+arb; the 4th (data-hdd) is replica 3. The first 3 are backed by an LVM partition (some thin provisioned) on an SSD; the 4th is on a seagate hybrid disk (hdd + some internal flash for acceleration). data-hdd is the only thing on the disk. Servers are Dell R610 with the PERC/6i raid card, with the disks individually passed through to the OS (no raid enabled). The above RAM usage issue came from the data-hdd volume. Yesterday, I cought one of the glusterfsd high ram usage before the OOM-Killer had to run. I was able to migrate the VMs off the machine and for good measure, reboot the entire machine (after taking this opportunity to run the software updates that ovirt said were pending). Upon booting back up, the necessary volume healing began. However, this time, the healing caused all three servers to go to very, very high load averages (I saw just under 200 on one server; typically they've been 40-70) with top reporting IO Wait at 7-20%. Network for this volume is a dedicated gig network. According to bwm-ng, initially the network bandwidth would hit 50MB/s (yes, bytes), but tailed off to mostly in the kB/s for a while. All machines' load averages were still 40+ and gluster volume heal data-hdd info reported 5 items needing healing. Server's were intermittently experiencing IO issues, even on the 3 gluster volumes that appeared largely unaffected. Even the OS activities on the hosts itself (logging in, running commands) would often be very delayed. The ovirt engine was seemingly randomly throwing engine down / engine up / engine failed notifications. Responsiveness on ANY VM was horrific most of the time, with random VMs being inaccessible. I let the gluster heal run overnight. By morning, there were still 5 items needing healing, all three servers were still experiencing high load, and servers were still largely unstable. I've noticed that all of my ovirt outages (and I've had a lot, way more than is acceptable for a production cluster) have come from gluster. I still have 3 VMs who's hard disk images have become corrupted by my last gluster crash that I haven't had time to repair / rebuild yet (I believe this crash was caused by the OOM issue previously mentioned, but I didn't know it at the time). Is gluster really ready for production yet? It seems so unstable to me.... I'm looking at replacing gluster with a dedicated NFS server likely FreeNAS. Any suggestions? What is the "right" way to do production storage on this (3 node cluster)? Can I get this gluster volume stable enough to get my VMs to run reliably again until I can deploy another storage solution? --Jim

11 23

Backup & Restore
by suporte＠logicworks.pt 27 Dec '18

27 Dec '18

------=_Part_20329569_1409874801.1519819859027 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Hi, I'm testing backup & restore on Ovirt 4.2. I follow this doc https://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration/ Try to restore to a fresh installation but always get this error message: restore-permissions Preparing to restore: - Unpacking file 'back_file' Restoring: - Files Provisioning PostgreSQL users/databases: - user 'engine', database 'engine' Restoring: FATAL: Can't connect to database 'ovirt_engine_history'. Please see '/usr/bin/engine-backup --help'. On the live engine I run # engine-backup --scope=all --mode=backup --file=file_name --log=log_file_name And try to restore on a fresh installation: # engine-backup --mode=restore --file=file_name --log=log_file_name --provision-db --restore-permissions Any Idea? Thanks -- Jose Ferradeira http://www.logicworks.pt ------=_Part_20329569_1409874801.1519819859027 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: trebuchet ms,sans-serif; font-size: = 12pt; color: #000000"><div data-marker=3D"__QUOTED_TEXT__"><div style=3D"fo= nt-family: Times New Roman; font-size: 10pt; color: #000000;" data-mce-styl= e=3D"font-family: Times New Roman; font-size: 10pt; color: #000000;"><div>H= i,<br></div><br><div><span style=3D"font-size: 11pt; font-family: terminal,= monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;= ">I'm testing backup & restore on Ovirt 4.2.</span><br></div><div><span= style=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style= =3D"font-size: 11pt; font-family: terminal, monaco;">I follow this doc http= s://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration/</sp= an><br></div><div><span style=3D"font-size: 11pt; font-family: terminal, mo= naco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;">T= ry to restore to a fresh installation but always get this error message:</s= pan><br></div><br><div><span style=3D"font-size: 11pt; font-family: termina= l, monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, monac= o;">restore-permissions</span><br><span style=3D"font-size: 11pt; font-fami= ly: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font-family: term= inal, monaco;">Preparing to restore:</span><br><span style=3D"font-size: 11= pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font= -family: terminal, monaco;">- Unpacking file 'back_file'</span><br><span st= yle=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"f= ont-size: 11pt; font-family: terminal, monaco;">Restoring:</span><br><span = style=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D= "font-size: 11pt; font-family: terminal, monaco;">- Files</span><br><span s= tyle=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"= font-size: 11pt; font-family: terminal, monaco;">Provisioning PostgreSQL us= ers/databases:</span><br><span style=3D"font-size: 11pt; font-family: termi= nal, monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, mon= aco;">- user 'engine', database 'engine'</span><br><span style=3D"font-size= : 11pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; = font-family: terminal, monaco;">Restoring:</span><br><span style=3D"font-si= ze: 11pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt= ; font-family: terminal, monaco;">FATAL: Can't connect to database 'ovirt_e= ngine_history'. Please see '/usr/bin/engine-backup --help'.</span><br></div= ><br><div><span style=3D"font-size: 11pt; font-family: terminal, monaco;" d= ata-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;">On the li= ve engine I run # engine-backup --scope=3Dall --mode=3Dbackup --file= =3Dfile_name --log=3Dlog_file_name</span></div><div><span style=3D"font-siz= e: 11pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt;= font-family: terminal, monaco;"><br data-mce-bogus=3D"1"></span></div><div= ><span style=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-s= tyle=3D"font-size: 11pt; font-family: terminal, monaco;">And try to restore= on a fresh installation:</span><br></div><div><span style=3D"font-size: 11= pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font= -family: terminal, monaco;"># engine-backup --mode=3Drestore --file=3Dfile_= name --log=3Dlog_file_name --provision-db --restore-permissions</span></div= ><div><span style=3D"font-size: 11pt; font-family: terminal, monaco;" data-= mce-style=3D"font-size: 11pt; font-family: terminal, monaco;"><br data-mce-= bogus=3D"1"></span></div><div><span style=3D"font-size: 11pt; font-family: = terminal, monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal= , monaco;">Any Idea?<br data-mce-bogus=3D"1"></span></div><div><span style= =3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"font= -size: 11pt; font-family: terminal, monaco;"><br data-mce-bogus=3D"1"></spa= n></div><div><span style=3D"font-size: 11pt; font-family: terminal, monaco;= " data-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;">Thanks= <br data-mce-bogus=3D"1"></span></div><div><span style=3D"font-size: 11pt; = font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font-fam= ily: terminal, monaco;"><br data-mce-bogus=3D"1"></span></div><div><span st= yle=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"f= ont-size: 11pt; font-family: terminal, monaco;"><br data-mce-bogus=3D"1"></= span></div><br><div>-- <br></div><div><hr style=3D"width: 100%; height: 2px= ;" data-mce-style=3D"width: 100%; height: 2px;">Jose Ferradeira<br>http://w= ww.logicworks.pt</div></div><br></div></div></body></html> ------=_Part_20329569_1409874801.1519819859027--

4 16

Out of sync, hosts network config differs from DC
by femi adegoke 02 Dec '18

02 Dec '18

Property: default route, host - true, DC - false I have 4 nics. bond0 = 2 x 10g eno1 = ovirtmgmt eno2 = for vm traffic. eno2 says it's out of sync, hosts network config differs from DC, default route: host - true, DC - false. I have tried "sync all networks" but the message still remains See attached. Where can I look to fix the issue?

3 2

oVirt Node on CentOS 7.5 and AMD EPYC Support
by Tobias Scheinert 30 Nov '18

30 Nov '18

Hi, I am currently building a new virtualization cluster with oVirt, using AMD EPYC processors (AMD EPYC 7351P). At the moment I'm running oVirt Node Version 4.2.3 @ CentOS 7.4.1708. We have the situation that the processor type is recognized as "AMD Opteron G3". With this type of instruction set the VMs are not able to do AES in hardware, this results in poor performance in our case. I found some information that tells me that this problem should be solved with CentOS 7.5 --> <https://access.redhat.com/errata/RHEA-2018:1488> My actual questions: - Are there any further information about the AMD EPYC support? - Any information about an update of the oVirt node to CentOS 7.5? Greeting Tobias

7 10

[OT] transferring kvm raw mage from filesystem to lvm based
by Gianluca Cecchi 02 Oct '18

02 Oct '18

Hello, I have a windows 7 VM that is composed by a raw disk on filesystem on Fedora 28. I would like to transfer this VM to another environment, always based on same version of Fedora 28, but where the storage is configured in virt-manager as lvm based, so similar to what happens in oVirt block based storage domains. I'm trying to figure how to transfer the image. I presume I can create a new LV and then leave some bytes for the LVM header into the created LV and then make a sort of dd with offset? Anyone has any hint? Thanks in advance, Gianluca

3 3

Error installing ovirt node
by Junaid Jadoon 20 Sep '18

20 Sep '18

Dear All, I have Ovirt engine 4.2 and node version is 4.2. After installing node in in ovirt engine when i try to install node it gives following error 14:25:37,410+05 ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] (EE-ManagedThreadFactory-engine-Thread-19) [52669850] Host installation failed for host 'bd8d007a-be92-4075-bba9-6cbeb890a1e5', 'node_2': Command returned failure code 1 during SSH session 'root(a)192.168.20.20' 2018-02-27 14:25:37,416+05 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] (EE-ManagedThreadFactory-engine-Thread-19) [52669850] START, SetVdsStatusVDSCommand(HostName = node_2, SetVdsStatusVDSCommandParameters:{hostId='bd8d007a-be92-4075-bba9-6cbeb890a1e5', status='InstallFailed', nonOperationalReason='NONE', stopSpmFailureLogged='false', maintenanceReason='null'}), log id: 2b138e87 2018-02-27 14:25:37,423+05 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] (EE-ManagedThreadFactory-engine-Thread-19) [52669850] FINISH, SetVdsStatusVDSCommand, log id: 2b138e87 2018-02-27 14:25:37,429+05 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-19) [52669850] EVENT_ID: VDS_INSTALL_FAILED(505), Host node_2 installation failed. Command returned failure code 1 during SSH session 'root(a)192.168.20.20'. 2018-02-27 14:25:37,433+05 INFO [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] (EE-ManagedThreadFactory-engine-Thread-19) [52669850] Lock freed to object 'EngineLock:{exclusiveLocks='[bd8d007a-be92-4075-bba9-6cbeb890a1e5=VDS]', sharedLocks=''}' I have attached log file for your reference Please help me out.

3 8

Failed to synchronize networks of Provider ovirt-provider-ovn
by Kapetanakis Giannis 14 Sep '18

14 Sep '18

Hi, After upgrading to 4.2.1 I have problems with ovn provider. I'm getting "Failed to synchronize networks of Provider ovirt-provider-ovn." I use custom SSL certificate in apache and I guess this is the reason. I've tried to update ovirt-provider-ovn.conf with [OVIRT] #ovirt-ca-file=/etc/pki/ovirt-engine/ca.pem ovirt-ca-file=/etc/pki/ovirt-engine/apache-ca.pem but still no go Any tips on this? thanks G

4 11

Re: Unable to start VM - Image is not a legal chain
by Yedidyah Bar David 14 Sep '18

14 Sep '18

(Changing subject, adding Freddy) On Tue, Jul 10, 2018 at 8:06 PM, Alex K <rightkicktech(a)gmail.com> wrote: > Hi all, > > I did a routine maintenance today (updating the hosts) to ovirt cluster > (4.2) and I have one VM that was complaining about an invalid snapshot. > After shutdown of VM the VM is not able to start again, giving the error: > > VM Gitlab is down with error. Exit message: Bad volume specification > {'serial': 'b6af2856-a164-484a-afe5-9836bbdd14e8', 'index': 0, 'iface': > 'virtio', 'apparentsize': '51838976', 'specParams': {}, 'cache': 'none', > 'imageID': 'b6af2856-a164-484a-afe5-9836bbdd14e8', 'truesize': > '52011008', 'type': 'disk', 'domainID': '142bbde6-ef9d-4a52-b9da-2de533c1f1bd', > 'reqsize': '0', 'format': 'cow', 'poolID': '00000001-0001-0001-0001-000000000311', > 'device': 'disk', 'path': '/rhev/data-center/00000001- > 0001-0001-0001-000000000311/142bbde6-ef9d-4a52-b9da- > 2de533c1f1bd/images/b6af2856-a164-484a-afe5-9836bbdd14e8/ > f3125f62-c909-472f-919c-844e0b8c156d', 'propagateErrors': 'off', 'name': > 'vda', 'bootOrder': '1', 'volumeID': 'f3125f62-c909-472f-919c-844e0b8c156d', > 'diskType': 'file', 'alias': 'ua-b6af2856-a164-484a-afe5-9836bbdd14e8', > 'discard': False}. > > I see also the following error: > > VDSM command CopyImageVDS failed: Image is not a legal chain: > (u'b6af2856-a164-484a-afe5-9836bbdd14e8',) > This error appears a few more times in the list's archive, all of which seem to be related to rather-old bugs (3.5/3.6 times) or storage problems. I assume you use 4.2. Are you sure the corruption happened only now? Did working with snapshots worked well before the upgrade? > > Seems as a corrupt VM disk? > Seems so to me, but I am not a storage expert. > > The VM had 3 snapshots. I was able to delete one from GUI then am not able > to delete the other two as the task fails. Generally I am not allowed to > clone, export or do sth to the VM. > > > Have you encountered sth similar. Any advice? > The lastest post, from 2016, included a workaround, you might (very carefully!) try that. I suggest to also open a bug and attach all relevant logs (engine, vdsm from all relevant hosts, including SPMs at time of snapshot operations and any other host that ran the VM), and try to give accurate reproduction steps. Best regards, -- Didi

3 4

Install oVirt node without Internet repository
by G, Maghesh Kumar (Nokia - IN/Bangalore) 13 Sep '18

13 Sep '18

--_000_HE1PR0702MB3532EC34365D995765A2B7D783A60HE1PR0702MB3532_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi Description of problem: Cannot add host - install fails & Install oVirt node without Internet repos= itory Version: Ovirt-4.2 Host is installed with RHEL 7.4 Actual results: Host KVM02 installation failed. Command returned failure code 1 during SSH = session 'root(a)192.175.2.231<mailto:root@192.175.2.231>' I found that right now on my oVirt Nodes in my test environment does not NO= T connect to the internet... Basically, i need the offline repository to access from oVirt nodes without= Internet access. Please guide us how to proceed Regards, Maghesh --_000_HE1PR0702MB3532EC34365D995765A2B7D783A60HE1PR0702MB3532_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-IN" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">Hi<o:p></o:p></span= ></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <pre><span style=3D"font-size:12.0pt;color:black">Description of problem:<o= :p></o:p></span></pre> <pre><span style=3D"font-size:12.0pt;color:black">Cannot add host - install= fails & Install oVirt node without Internet repository<o:p></o:p></spa= n></pre> <pre><span style=3D"font-size:12.0pt;color:black"><o:p> </o:p></span><= /pre> <pre><span style=3D"font-size:12.0pt;color:black">Version: Ovirt-4.2<o:p></= o:p></span></pre> <pre><span style=3D"font-size:12.0pt;color:black">Host is installed with RH= EL 7.4<o:p></o:p></span></pre> <pre><span style=3D"font-size:12.0pt;color:black"><o:p> </o:p></span><= /pre> <pre><span style=3D"font-size:12.0pt;color:black">Actual results:<o:p></o:p= ></span></pre> <pre><span style=3D"font-size:12.0pt;color:black">Host KVM02 installation f= ailed. Command returned failure code 1 during SSH session '<a href=3D"mailt= o:root@192.175.2.231"><span style=3D"color:#6699CC">root(a)192.175.2.231</spa= n></a>'<o:p></o:p></span></pre> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">I found that right = now on my oVirt Nodes in my test environment <b>does not NOT connect to the internet.</b>.. <o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">Basically, i need t= he offline repository to access from oVirt nodes without Internet access.<o= :p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN"><o:p> </o:p></= span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">Please guide us how= to proceed<o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN"><o:p> </o:p></= span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">Regards,<o:p></o:p>= </span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">Maghesh<o:p></o:p><= /span></p> <p class=3D"MsoNormal"><o:p> </o:p></p> </div> </body> </html> --_000_HE1PR0702MB3532EC34365D995765A2B7D783A60HE1PR0702MB3532_--

3 7

Engine Setup Error
by Sakhi Hadebe 05 Sep '18

05 Sep '18

Hi, We are deploying the hosted engine on oVirt-Node-4.2.3.1 using the command "hosted-engine --deploy". After providing answers it runs the ansible script and hit the Error when creating glusterfs storage domain. Attached the screenshot of the ERROR. Please help.

5 17

Re: External ceph storage
by Luca 'remix_tj' Lorenzetto 27 Aug '18

27 Aug '18

No, The only way you have is to configure cinder to manage ceph pool or in alternative you have to deploy an iscsi gateway, no other ways are available at the moment. So you can't use rbd directly. Luca Il dom 27 mag 2018, 16:54 Leo David <leoalex(a)gmail.com> ha scritto: > Thank you Luca, > At the moment i would try the cinder storage provider, since we already > have a proxmox cluster directly connecting to ceph. The problem is that I > just could not find a straight way to do this. > ie: Specify the ceph monitors and ceph pool to connect to. Can oVirt > directly connect to ceph monitors ? How the configuration should be done if > so ? > Thank you very much ! > > > On Sun, May 27, 2018, 17:20 Luca 'remix_tj' Lorenzetto < > lorenzetto.luca(a)gmail.com> wrote: > >> Hello, >> >> Yes, using cinder or through iscsi gateway. >> >> For a simpler setup i suggest the second option. >> >> Luca >> >> Il dom 27 mag 2018, 16:08 Leo David <leoalex(a)gmail.com> ha scritto: >> >>> Hello everyone, >>> I am new to ovirt and very impressed of its features. I would like to >>> levereage on our existing ceph cluster to provide rbd images for vm hdds, >>> is this possible to achieve ? >>> Thank you very much ! >>> Regards, >>> Leo >>> _______________________________________________ >>> Users mailing list -- users(a)ovirt.org >>> To unsubscribe send an email to users-leave(a)ovirt.org >>> >>

3 3

Fwd: Re: Single node single node SelfHosted Hyperconverged
by Leo David 22 Aug '18

22 Aug '18

---------- Forwarded message ---------- From: Leo David <leoalex(a)gmail.com> Date: Tue, Jun 12, 2018 at 7:57 PM Subject: Re: [ovirt-users] Re: Single node single node SelfHosted Hyperconverged To: femi adegoke <ovirt(a)fateknollogee.com> Thank you very much for you response, now it feels I can barelly see the light ! So: multipath -ll 3614187705c01820022b002b00c52f72e dm-1 DELL ,PERC H730P Mini size=931G features='1 queue_if_no_path' hwhandler='0' wp=rw `-+- policy='service-time 0' prio=1 status=active `- 0:2:0:0 sda 8:0 active ready running lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 931G 0 disk ├─sda1 8:1 0 1G 0 part ├─sda2 8:2 0 930G 0 part └─3614187705c01820022b002b00c52f72e 253:1 0 931G 0 mpath ├─3614187705c01820022b002b00c52f72e1 253:3 0 1G 0 part /boot └─3614187705c01820022b002b00c52f72e2 253:4 0 930G 0 part ├─onn-pool00_tmeta 253:6 0 1G 0 lvm │ └─onn-pool00-tpool 253:8 0 825.2G 0 lvm │ ├─onn-ovirt--node--ng--4.2.3.1--0.20180530.0+1 253:9 0 798.2G 0 lvm / │ ├─onn-pool00 253:12 0 825.2G 0 lvm │ ├─onn-var_log_audit 253:13 0 2G 0 lvm /var/log/audit │ ├─onn-var_log 253:14 0 8G 0 lvm /var/log │ ├─onn-var 253:15 0 15G 0 lvm /var │ ├─onn-tmp 253:16 0 1G 0 lvm /tmp │ ├─onn-home 253:17 0 1G 0 lvm /home │ └─onn-var_crash 253:20 0 10G 0 lvm /var/crash ├─onn-pool00_tdata 253:7 0 825.2G 0 lvm │ └─onn-pool00-tpool 253:8 0 825.2G 0 lvm │ ├─onn-ovirt--node--ng--4.2.3.1--0.20180530.0+1 253:9 0 798.2G 0 lvm / │ ├─onn-pool00 253:12 0 825.2G 0 lvm │ ├─onn-var_log_audit 253:13 0 2G 0 lvm /var/log/audit │ ├─onn-var_log 253:14 0 8G 0 lvm /var/log │ ├─onn-var 253:15 0 15G 0 lvm /var │ ├─onn-tmp 253:16 0 1G 0 lvm /tmp │ ├─onn-home 253:17 0 1G 0 lvm /home │ └─onn-var_crash 253:20 0 10G 0 lvm /var/crash └─onn-swap 253:10 0 4G 0 lvm [SWAP] sdb 8:16 0 931G 0 disk └─sdb1 8:17 0 931G 0 part sdc 8:32 0 4.6T 0 disk └─sdc1 8:33 0 4.6T 0 part nvme0n1 259:0 0 1.1T 0 disk So the multipath "3614187705c01820022b002b00c52f72e" that was shown in the error is actually the root filesystem, which was created at node installation ( from iso ). Is this mpath ok that is activated on sda ? What should I do in this situation ? Thank you ? On Tue, Jun 12, 2018 at 5:38 PM, femi adegoke <ovirt(a)fateknollogee.com> wrote: > Are your disks "multipathing"? > > What's your output if you run the command multipath -ll > > For comparison sake, here is my gdeploy.conf (used for a single host > gluster install) - lv1 was changed to 62gb > **Credit for that pastebin to Squeakz on the IRC channel > https://pastebin.com/LTRQ78aJ > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/communit > y/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archiv > es/list/users(a)ovirt.org/message/EEIE4PWUFCXHHTT6PGP2EPFQXIWL6H5P/ > -- Best regards, Leo David -- Best regards, Leo David

3 16

vacuumdb: could not connect to database ovirt_engine_history
by emanuel.santosvarina＠mahle.com 22 Aug '18

22 Aug '18

..trying to update from 4.2.3 to 4.2.4 engine-setup fails with the following error: --snip 2018-06-28 16:26:45,507+0200 DEBUG otopi.plugins.ovirt_engine_setup.ovirt_engine_dwh.db.vacuum plugin.execute:926 execute-output: ['/usr/share/ovirt-engine-dwh/bin/dwh-vacuum.sh', '-f', '-v'] stderr: vacuumdb: could not connect to database ovirt_engine_history: FATAL: password authentication failed for user "ovirt_engine_history" 2018-06-28 16:26:45,507+0200 DEBUG otopi.context context._executeMethod:143 method exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/context.py", line 133, in _executeMethod method['method']() File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-setup/ovirt-engine-dwh/db/vacuum.py", line 126, in _vacuum self.execute(args=args) File "/usr/lib/python2.7/site-packages/otopi/plugin.py", line 931, in execute command=args[0], RuntimeError: Command '/usr/share/ovirt-engine-dwh/bin/dwh-vacuum.sh' failed to execute 2018-06-28 16:26:45,508+0200 ERROR otopi.context context._executeMethod:152 Failed to execute stage 'Misc configuration': Command '/usr/share/ovirt-engine-dwh/bin/dwh-vacuum.sh' failed to execute 2018-06-28 16:26:45,508+0200 DEBUG otopi.transaction transaction.abort:119 aborting 'Yum Transaction' --snap Any ideas? Thank You, Ema

5 8

Network issues with oVirt 4.2 and cloud-init
by Berger, Sandy 17 Aug '18

17 Aug '18

--_000_DM5PR05MB316161E1C7E2EB8EA09A76A0D5D40DM5PR05MB3161namp_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable We're using cloud-init to customize VMs built from a template. We're using = static IPV4 settings so we're specifying an IP address, subnet mask, and ga= teway. There is apparently a bug in the current version of cloud-init shipp= ing as part of CentOS 7.4 (https://bugzilla.redhat.com/show_bug.cgi?id=3D14= 92726) that fails to set the gateway properly. In the description of the bu= g, it says it is fixed in RHEL 7.5 but also says one can use https://people= .redhat.com/rmccabe/cloud-init/cloud-init-0.7.9-20.el7.x86_64.rpm which is = what we're doing. When the new VM first boots, the 3 IPv4 settings are all set correctly. Reb= oots of the VM maintain the settings properly. But, if the VM is shut down = and started again via the oVirt GUI, all of the IPV4 settings on the eth0 v= irtual NIC are lost and the /etc/sysconfig/network-scripts/ifcfg-eth0 shows= that the NIC is now set up for DHCP. Are we doing something incorrectly? Sandy Berger IT - Infrastructure Engineer II Quad/Graphics Performance through Innovation Sussex, Wisconsin 414.566.2123 phone 414.566.4010/2123 pager/PIN sandy.berger(a)qg.com<mailto:sandy.berger@qg.com> www.QG.com<http://www.qg.com/> Follow Us: Facebook<http://www.qg.com/social1> | Twitter<http://www.qg.com/= social2> | LinkedIn<http://www.qg.com/social3> | YouTube<http://www.qg.com/= social4> --_000_DM5PR05MB316161E1C7E2EB8EA09A76A0D5D40DM5PR05MB3161namp_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> <p class=3D"MsoNormal">We’re using cloud-init to customize VMs built = from a template. We’re using static IPV4 settings so we’re spec= ifying an IP address, subnet mask, and gateway. There is apparently a bug i= n the current version of cloud-init shipping as part of CentOS 7.4 (<a href=3D"https://bugzilla.redhat.com/show_bug.cgi?id=3D14= 92726">https://bugzilla.redhat.com/show_bug.cgi?id=3D1492726</a>) that fail= s to set the gateway properly. In the description of the bug, it says it is= fixed in RHEL 7.5 but also says one can use <a href=3D"https://people.redhat.com/rmccabe/cloud-init/cloud-init-0.7= .9-20.el7.x86_64.rpm"> https://people.redhat.com/rmccabe/cloud-init/cloud-init-0.7.9-20.el7.x86_64= .rpm</a> which is what we’re doing.<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">When the new VM first boots, the 3 IPv4 settings are= all set correctly. Reboots of the VM maintain the settings properly. But, = if the VM is shut down and started again via the oVirt GUI, all of the IPV4= settings on the eth0 virtual NIC are lost and the /etc/sysconfig/network-scripts/ifcfg-eth0 shows that the = NIC is now set up for DHCP.<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Are we doing something incorrectly?<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal"><b><span style=3D"font-size:10.0pt;font-family:&quot= ;Arial",sans-serif;color:#1E47A4">Sandy Berger </span></b><span style=3D"font-size:10.5pt;font-family:"Arial",sa= ns-serif;color:#444444"><o:p></o:p></span></p> <p class=3D"MsoNormal"><i><span style=3D"font-size:10.0pt;font-family:&quot= ;Arial",sans-serif;color:#434D5B">IT – Infrastructure Engineer I= I</span></i><span style=3D"font-size:10.5pt;font-family:"Arial",s= ans-serif;color:#444444"><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;font-family:"Ar= ial",sans-serif;color:#444444"> <o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial",sans-serif;color:#1E47A4">Quad/Graphics</span><span style=3D"font= -size:10.5pt;font-family:"Arial",sans-serif;color:#444444"><o:p><= /o:p></span></p> <p class=3D"MsoNormal"><i><span style=3D"font-size:8.0pt;font-family:"= Arial",sans-serif;color:#434D5B">Performance</span></i><span style=3D"= font-size:8.0pt;font-family:"Arial",sans-serif;color:#434D5B">&nb= sp;through </span><i><span style=3D"font-size:8.5pt;font-family:"= Arial",sans-serif;color:#434D5B">Innovation</span></i><span style=3D"f= ont-size:10.5pt;font-family:"Arial",sans-serif;color:#444444"><o:= p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;font-family:"Ar= ial",sans-serif;color:#434D5B"> </span><span style=3D"font-size:1= 0.5pt;font-family:"Arial",sans-serif;color:#444444"><o:p></o:p></= span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial",sans-serif;color:#434D5B">Sussex, Wisconsin</span><span style=3D"= font-size:10.5pt;font-family:"Arial",sans-serif;color:#444444"><o= :p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial",sans-serif;color:#434D5B">414.566.2123 phone</span><span style=3D= "font-size:10.5pt;font-family:"Arial",sans-serif;color:#444444"><= o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial",sans-serif;color:#434D5B">414.566.4010/2123 pager/PIN</span><span= style=3D"font-size:10.5pt;font-family:"Arial",sans-serif;color:#= 444444"><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"> <= /span><span style=3D"font-size:10.5pt;font-family:"Arial",sans-se= rif;color:#444444"><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial",sans-serif;color:black"><a href=3D"mailto:sandy.berger@qg.com"><s= pan style=3D"color:blue">sandy.berger(a)qg.com</span></a></span><span style= =3D"font-size:10.5pt;font-family:"Arial",sans-serif;color:#444444= "><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-family:"Arial",sans-se= rif;color:black"><a href=3D"http://www.qg.com/"><span style=3D"font-size:10= .0pt;color:blue">www.QG.com</span></a></span><span style=3D"font-size:10.5p= t;font-family:"Arial",sans-serif;color:#444444"><o:p></o:p></span= ></p> <p class=3D"MsoNormal"><o:p> </o:p></p> </div> Follow Us: <a href=3D"http://www.qg.com/social1">Facebook</a> | <a href=3D"= http://www.qg.com/social2"> Twitter</a> | <a href=3D"http://www.qg.com/social3">LinkedIn</a> | <a href= =3D"http://www.qg.com/social4"> YouTube</a> </body> </html> --_000_DM5PR05MB316161E1C7E2EB8EA09A76A0D5D40DM5PR05MB3161namp_--

4 5

oVirt node 4.2.x - custom multipath.conf and external storage availability
by Roberto Nunin 13 Aug '18

13 Aug '18

HI all How can I provide to my oVirt hosts a custom multipath.conf, considering that we are using shared/mirrored FC storage from HPE 3PAR with high availability of provided LUNs, using peer-persistance feature ? To configure correctly this require a custom multipath.conf is required. How I can avoid it will be overwritten during upgrades ? Second topic: Is ALUA feature supported also in oVirt nodes, like for standard RHEL 6/7 and/or CentOS 6/7 ? I was digging for a while into user's digest, but not able to find focused informations. This is the feature needed by peer-persistance, allowing two different volumes to be masked toward a given host with the same WWN and LUN number. Thanks in advance -- Roberto

2 2

Drive letter / scsi id not consistent
by Nathan March 09 Aug '18

09 Aug '18

Hi, Managing disks in the ovirt gui seems completely error prone since the GUI ordering does not seem to be used in any practical way. The scsi ID's are not exposed via the GUI either, so if you have 2 drives of the same size on NFS there's no way to identify which is which without resorting to dumping the xml. I see in the xml that the target dev is correct and matches up with the GUI's drive order, but the scsi unit seems to be generated based on the order of last activated: <disk type='file' device='disk' snapshot='no'> <driver name='qemu' type='raw' cache='none' error_policy='stop' io='threads'/> <source file='/rhev/data-center/mnt/10.1.32.10:_sas01/2060a19f-f26c-4dba-a559-83541a4d0c7a/images/b622cde9-ffc4-487b-8038-f7cb7fbc00a1/7240b4b2-5ab1-40ab-99bb-09c69fd835f6'/> <backingStore/> <target dev='sda' bus='scsi'/> <serial>b622cde9-ffc4-487b-8038-f7cb7fbc00a1</serial> <boot order='1'/> <alias name='ua-b622cde9-ffc4-487b-8038-f7cb7fbc00a1'/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <disk type='file' device='disk' snapshot='no'> <driver name='qemu' type='raw' cache='none' error_policy='stop' io='threads'/> <source file='/rhev/data-center/mnt/10.1.32.10:_sas01/2060a19f-f26c-4dba-a559-83541a4d0c7a/images/86765f60-4240-44f4-b437-f22b2cc3df1a/482a363e-461a-4f37-876c-43ceb529a93a'/> <backingStore/> <target dev='sdb' bus='scsi'/> <serial>86765f60-4240-44f4-b437-f22b2cc3df1a</serial> <alias name='ua-86765f60-4240-44f4-b437-f22b2cc3df1a'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='disk' snapshot='no'> <driver name='qemu' type='raw' cache='none' error_policy='stop' io='threads'/> <source file='/rhev/data-center/mnt/10.1.32.10:_sas01/2060a19f-f26c-4dba-a559-83541a4d0c7a/images/0b020d24-3dea-4be7-931a-9c25ccfeec48/7e3957ff-a3bf-4080-a7b6-ddad7f63a299'/> <backingStore/> <target dev='sdc' bus='scsi'/> <serial>0b020d24-3dea-4be7-931a-9c25ccfeec48</serial> <alias name='scsi0-0-0-3'/> <address type='drive' controller='0' bus='0' target='0' unit='3'/> </disk> After deactivating the other 2 disks and rebooting the machine, sda has now become unit 3: <target dev='sda' bus='scsi'/> <serial>b622cde9-ffc4-487b-8038-f7cb7fbc00a1</serial> <boot order='1'/> <alias name='ua-b622cde9-ffc4-487b-8038-f7cb7fbc00a1'/> <address type='drive' controller='0' bus='0' target='0' unit='3'/> and then I shutdown, activated the extra 2 drives, booted it back up but now I'm still on unit 3: <disk type='file' device='disk' snapshot='no'> <driver name='qemu' type='raw' cache='none' error_policy='stop' io='threads'/> <source file='/rhev/data-center/mnt/10.1.32.10:_sas01/2060a19f-f26c-4dba-a559-83541a4d0c7a/images/b622cde9-ffc4-487b-8038-f7cb7fbc00a1/7240b4b2-5ab1-40ab-99bb-09c69fd835f6'/> <backingStore/> <target dev='sda' bus='scsi'/> <serial>b622cde9-ffc4-487b-8038-f7cb7fbc00a1</serial> <boot order='1'/> <alias name='ua-b622cde9-ffc4-487b-8038-f7cb7fbc00a1'/> <address type='drive' controller='0' bus='0' target='0' unit='3'/> </disk> <disk type='file' device='disk' snapshot='no'> <driver name='qemu' type='raw' cache='none' error_policy='stop' io='threads'/> <source file='/rhev/data-center/mnt/10.1.32.10:_sas01/2060a19f-f26c-4dba-a559-83541a4d0c7a/images/86765f60-4240-44f4-b437-f22b2cc3df1a/482a363e-461a-4f37-876c-43ceb529a93a'/> <backingStore/> <target dev='sdb' bus='scsi'/> <serial>86765f60-4240-44f4-b437-f22b2cc3df1a</serial> <alias name='ua-86765f60-4240-44f4-b437-f22b2cc3df1a'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='disk' snapshot='no'> <driver name='qemu' type='raw' cache='none' error_policy='stop' io='threads'/> <source file='/rhev/data-center/mnt/10.1.32.10:_sas01/2060a19f-f26c-4dba-a559-83541a4d0c7a/images/0b020d24-3dea-4be7-931a-9c25ccfeec48/7e3957ff-a3bf-4080-a7b6-ddad7f63a299'/> <backingStore/> <target dev='sdc' bus='scsi'/> <serial>0b020d24-3dea-4be7-931a-9c25ccfeec48</serial> <alias name='ua-0b020d24-3dea-4be7-931a-9c25ccfeec48'/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> I managed to get things into the correct state by shutting down the VM, deactivating all the disks, then activating them in the order I want them to show up. This sets the correct order of unit 0 for sda, unit 1 for sdb, unit 2 for sdc. Is there some way to make ovirt treat this in a sane way and always expose the scsi devices in the same order as the GUI (and the "target dev" field)? Cheers! Nathan

2 2

better understand ovirt-engine functions
by stuartk＠alleninstitute.org 07 Aug '18

07 Aug '18

I've been reading through documentation https://www.ovirt.org/documentation/architecture/architecture/ https://www.ovirt.org/documentation/self-hosted/Self-Hosted_Engine_Guide/ But am struggling still to understand the role ovirt-engine plays. Would anyone have recommends for additional reads? The problem I'm tackling currently looks like this: - We have (2) oVirt Data Centers, each populated by a single Cluster. The Data Centers are physically & network-wise 'distant' from one another - hosted-engine runs on (3) of the (4) Hosts in Data Center A / Cluster A. hosted-engine does not run on Data Center B / Cluster B - When we disrupt network connectivity around Cluster A (yes, that's Cluster *A*), Hosts in Cluster B crash (requiring a power cycle) and Guests in Cluster B get stopped and paused I'm struggling to understand why mussing with Cluster A affects Cluster B. From pcaps, I can see plenty of TLS traffic from Cluster A's Hosts -- presumably from ovirt-engine running on Cluster A -- exchanged with Cluster B. So, during my last maintenance window, I put hosted-engine into maintenance mode ... but Hosts/VMs in Cluster B were still affected. Where do I go to better understand what ovirt-engine does when it is 'managing' Hosts & VMs? --sk

3 6

MoM - Not working ? How to use it ?
by jeanbaptiste＠nfrance.com 07 Aug '18

07 Aug '18

Hello, I'm trying to test Memory balloon useful functionality, but l'm unable to make it work successfuly. Firstly, I enable the MOM on my Cluster: Memory Balloon Enable Memory Balloon Optimization Secondly, I configure a VM virtual machine like this: On system tab: Memory Size : 28672 MB Maximum memory : 28672 MB On Ressource allocation tab: Memory Allocation: Physical Memory Guaranteed : 2048 MB Memory Balloon Device: Enabled Thirdly, I test 1- I boot the VM. After boot VM consume 200MB 2- I lauch perl program which consume 26GB. 3- During this, Host RAM usage is near 90% 4- I stop the perl program, and on guest side, RAM usage drop down to 200Mo 5- On host side, RAM usage keep to 24 - 26GB. I wait some time to show if the qemu-vm process drop is host-ram-usage. Ram usage keep to 24GB. 6- I try to launch another VM like the first one (but with 8GB RAM and 2GB Guaranteed) , on the host (to "force" Mom ?) but I'm unable to lauch it, Host free mem is insufficient I change MoM log to debug to show something: 2018-07-31 11:49:31,887 - mom.RPCServer - INFO - ping() 2018-07-31 11:49:31,888 - mom.RPCServer - INFO - getStatistics() 2018-07-31 11:49:31,888 - mom.Monitor - DEBUG - Field 'mem_free' not known. Ignoring. 2018-07-31 11:49:43,313 - mom.VdsmRpcBase - DEBUG - VM List: [u'9632443f-d302-43f7-a279-778e64ee98f4'] 2018-07-31 11:49:43,465 - mom.VdsmRpcBase - DEBUG - Memory stats: {'swap_out': 0, 'swap_usage': 0, 'mem_free': 28221020, 'major_fault': 0, 'swap_in': 0, 'swap_total': 0, 'mem_available': 28650472, 'minor_fault': 99, 'mem_unused': 28221020} 2018-07-31 11:49:43,468 - mom.Monitor - DEBUG - Collector <mom.Collectors.GuestIoTuneOptional.GuestIoTuneOptional instance at 0x167de18> did not return any data 2018-07-31 11:49:43,931 - mom.RPCServer - INFO - ping() 2018-07-31 11:49:43,932 - mom.RPCServer - INFO - getStatistics() 2018-07-31 11:49:43,932 - mom.Monitor - DEBUG - Field 'mem_free' not known. Ignoring. 2018-07-31 11:49:44,258 - mom.Monitor - DEBUG - Field 'mem_free' not known. Ignoring. 2018-07-31 11:49:44,284 - mom.Evaluator - DEBUG - debug: ('No shared pages, setting ksm_merge_across_nodes to', 1) 2018-07-31 11:49:44,286 - mom.Evaluator - DEBUG - debug: ('entry: apply_NUMA_policy',) 2018-07-31 11:49:44,286 - mom.Evaluator - DEBUG - debug: (1, '=ksm_merge_across_nodes ACTUAL from kernel') 2018-07-31 11:49:44,286 - mom.Evaluator - DEBUG - debug: (1, '=ksmMergeAcrossNodes REQUIRED from oVirt-engine') 2018-07-31 11:49:44,289 - mom.Evaluator - DEBUG - debug: ('exit: apply_NUMA_policy return_value = ', 0) 2018-07-31 11:49:44,310 - mom.Policy - DEBUG - Results: [0, 1, 1, 1, 0, 1, 1, 0.2, 0.05, 0.2, 0.05, 0.0025, 'change_big_enough', 'shrink_guest', 'grow_guest', 0.22506353015141964, 'balloon_logic', [0], 'guest_qos', [0], 300, -50, 64, 1250, 10, 0.2, 'change_npages', 'apply_NUMA_policy', 6550590.4, 30058208, None, 0, 0, None, -1, 100000, 'check_and_set_quota', 'reset_quota_and_period', [None], 0, 'set_io_limits', 'reset_io_limits', [0]] Does I miss something ? MoM behavior ? Thanks for all !

3 9

Pool
by suporte＠logicworks.pt 03 Aug '18

03 Aug '18

I create a pool with 3 VMs, V. 4.2. Now I want to delete just one VM of that pool. Is that possible? Thanks Josá -- Jose Ferradeira http://www.logicworks.pt

3 11

Unable to revive host after a reboot
by Julius Schwartzenberg 03 Aug '18

03 Aug '18

Hi, I recently had to shutdown my oVirt system which contains both the engine and the host. After it came back up, the host was not able to initialize anymore from the oVirt UI. First it kept getting stuck in a loop with setting "ExecutingStarted: Jul 30, 2018, 9:06:21 AMSetting Host pc331 to Non-Operational mode." This was being repeated over and over again. It also gave this error: Host pc331 does not comply with the cluster Default networks, the following networks are missing on host: 'ovirtmgmt' Even though I am using that interface (ovirtmgmt) to access the system and 'ip addr show' shows that it's set up properly. I tried some more things, including upgrading the host, When I do that, the status changes to 'Installing' and later to 'Install Failed'. Here are the engine.log, vdsm.log and ovirt-host-deploy*.log: https://drive.google.com/open?id=13vIUDVjPynmAK0pnFRLabDfUlG1lmkpI https://drive.google.com/open?id=10Zm2dDpxM2k5A2bEs_l6gOv_yWv4cjlN https://drive.google.com/open?id=1AieWMzRuA0gZj3x5yDH1AGnsT2E3VtOM Any idea what is going wrong (what I'm doing wrong) and how to solve it? Thanks in advance! Best regards, Julius

5 9

Failed with error AcquireHostIdFailure and code 661
by Альбов Леонид 02 Aug '18

02 Aug '18

Hi! Help with importing a storage domain. I have disconnected the domain from cluster 4.1 and am importing to the new cluster 4.2. I got an error: 2018-07-25 18:13:54,253+03 WARN [org.ovirt.engine.core.bll.storage.domain.AttachStorageDomainToPoolCommand] (default task-30) [fa0fb8c1-7056-4cbd-801a-49b640b78e10] Detaching Storage Domain 'a0e51739-17b4-46c3-a99c-7e14046b6133' from it's previous storage pool '00000000-0000-0000-0000-000000000000' has failed. The meta data of the Storage Domain might still indicate that it is attached to a different Storage Pool. 2018-07-25 18:13:54,253+03 ERROR [org.ovirt.engine.core.bll.storage.domain.AttachStorageDomainToPoolCommand] (default task-30) [fa0fb8c1-7056-4cbd-801a-49b640b78e10] Command 'org.ovirt.engine.core.bll.storage.domain.AttachStorageDomainToPoolCommand' failed: EngineException: org.ovirt.engine.core.vdsbroker.irsbroker.IrsOperationFailedNoFailoverException: IRSGenericException: IRSErrorException: Failed to DetachStorageDomainVDS, error = Cannot acquire host id: (u'a0e51739-17b4-46c3-a99c-7e14046b6133', SanlockException(19, 'Sanlock lockspace add failure', 'No such device')), code = 661 (Failed with error AcquireHostIdFailure and code 661) -- Альбов Леонид

2 1

Primary passthrough: QXL gets dosent disabled on boot Windows 10
by Alexis Enrrique Gavidia Albornoz 01 Aug '18

01 Aug '18

when the VM boots with the real GPU attached, the emulated QXL graphics gets disabled by windows itself., Moreover, you can install windows 7 running on QXL, then install the real GPU drivers and the QXL will be turned off by windows, why with WIndows 10 dose not ocure the same behaivor, i want to use my Quadro k2200 as the primary board. br Alexis E Gavidia A [cid:3eb0e384-752e-449d-b5d2-dabc1d22cb4f] [cid:f3eecd6f-2333-4d03-9cfc-656de75f4050]

3 3

Error trying out the new VDO dedupe/compression settings in cockpit
by Jayme 01 Aug '18

01 Aug '18

PLAY [gluster_servers] ********************************************************* TASK [Create VDO with specified size] ****************************************** failed: [HOST] (item={u'disk': u'/dev/sda', u'logicalsize': u'17000G', u'name': u'vdo_sda'}) => {"changed": false, "err": "usage: vdo create [-h] -n <volume> --device <devicepath>\n [--activate {disabled,enabled}]\n [--blockMapCacheSize <megabytes>]\n [--blockMapPeriod <period>]\n [--compression {disabled,enabled}]\n [--deduplication {disabled,enabled}]\n [--emulate512 {disabled,enabled}] [--force]\n [--indexMem <gigabytes>] [--readCache {disabled,enabled}]\n [--readCacheSize <megabytes>]\n [--sparseIndex {disabled,enabled}]\n [--vdoAckThreads <threadCount>]\n [--vdoBioRotationInterval <ioCount>]\n [--vdoBioThreads <threadCount>]\n [--vdoCpuThreads <threadCount>]\n [--vdoHashZoneThreads <threadCount>]\n [--vdoLogicalSize <megabytes>]\n [--vdoLogicalThreads <threadCount>]\n [--vdoLogLevel {critical,error,warning,notice,info,debug}]\n [--vdoPhysicalThreads <threadCount>]\n [--vdoSlabSize <megabytes>]\n [--writePolicy {async,sync,auto}] [-f <file>]\n [--logfile <pathname>] [--verbose]\nvdo create: error: argument --vdoSlabSize: must be an LVM-style size string\n", "item": {"disk": "/dev/sda", "logicalsize": "17000G", "name": "vdo_sda"}, "msg": "Creating VDO vdo_sda failed.", "rc": 2} failed: [HOST] (item={u'disk': u'/dev/sdb', u'logicalsize': u'17000G', u'name': u'vdo_sdb'}) => {"changed": false, "err": "usage: vdo create [-h] -n <volume> --device <devicepath>\n [--activate {disabled,enabled}]\n [--blockMapCacheSize <megabytes>]\n [--blockMapPeriod <period>]\n [--compression {disabled,enabled}]\n [--deduplication {disabled,enabled}]\n [--emulate512 {disabled,enabled}] [--force]\n [--indexMem <gigabytes>] [--readCache {disabled,enabled}]\n [--readCacheSize <megabytes>]\n [--sparseIndex {disabled,enabled}]\n [--vdoAckThreads <threadCount>]\n [--vdoBioRotationInterval <ioCount>]\n [--vdoBioThreads <threadCount>]\n [--vdoCpuThreads <threadCount>]\n [--vdoHashZoneThreads <threadCount>]\n [--vdoLogicalSize <megabytes>]\n [--vdoLogicalThreads <threadCount>]\n [--vdoLogLevel {critical,error,warning,notice,info,debug}]\n [--vdoPhysicalThreads <threadCount>]\n [--vdoSlabSize <megabytes>]\n [--writePolicy {async,sync,auto}] [-f <file>]\n [--logfile <pathname>] [--verbose]\nvdo create: error: argument --vdoSlabSize: must be an LVM-style size string\n", "item": {"disk": "/dev/sdb", "logicalsize": "17000G", "name": "vdo_sdb"}, "msg": "Creating VDO vdo_sdb failed.", "rc": 2} to retry, use: --limit @/tmp/tmpQQ9t92/vdo-create.retry PLAY RECAP ********************************************************************* HOST : ok=0 changed=0 unreachable=0 failed=1

3 7

template disk attribute in version 4 restapi
by like.ma＠cs2c.com.cn 01 Aug '18

01 Aug '18

Hi All, In the restapi of version 3, there is bootable attribute in disk. But in version 4, the bootable attribute is removed from disk. For vm i can get bootable attribute from diskattachment. But there is no diskattachment in template. So, is there any way in the restapi of version 4 that i can know if the disk of the template is bootable or not? Thanks Regards. like.ma(a)cs2c.com.cn

2 10

Data Recovery from snapshot
by Jim Kusznir 01 Aug '18

01 Aug '18

Hi: With yet another gluster disk failure / gluster collapse, it appears I lost the "main" backing image for one of my vm servers. I have snapshots still in tact (or at least, appear to be), but the main image is gone. The main server process stores a backup at regular intervals in its disk, and that would have been changed data, so it would be in the snapshot rather than the base image. Is there any way to recover this one .tar.gz file from the snapshot with the missing main image? This is a backup of dynamic data, and without it, I will have lost several customers data, some of which cannot be recreated/regenerated. it also appears that my backup (gluster geo-replication) did not work (had crashed a while ago, and has a very old backup of this image). --Jim

2 1

Re: adding hosts problems with GlusterFS
by Jayme 01 Aug '18

01 Aug '18

I think we are in a race to see who can get a new HCI setup built faster. There have been a few hurtles along the way :) On Tue, Jul 31, 2018, 6:53 AM Bill Dossett, <bill.dossett(a)pb.com> wrote: > Hmm, resounding silence…. Have attached a screen shot of the host storage > devices on the host I added after the initial deployment. So at the bottom > you can see that sdb – sdg are all locked and FS type is multipath_member > those all equate to the UID type NAME at the top. The very top row, I > created a brick, so it is also now locked, however when I go to brick view > there is no brick. I also can’t seem to delete any brick one it is created > either. On the first 3 hosts, sdb – sdg are all unlocked and I can create > bricks… going to remove a host and re-add it to see if there is anything I > am missing, but I don’t have any other ideas at this point. > > > > > > > > Regards, Bill > > > > *Bill Dossett* > > DevOps Ninja > > AWS-DevOps-Pro > <https://aws.amazon.com/certification/certified-devops-engineer-professional/> > , AWS-SA-A > <https://aws.amazon.com/certification/certified-solutions-architect-associat…> > VCAP-DCA > <http://mylearn.vmware.com/mgrReg/plan.cfm?plan=30483&ui=www_cert>, > VCAP-DCD > <http://mylearn.vmware.com/mgrReg/plan.cfm?plan=30484&ui=www_cert>, MCSA > Win Server > > > > *IT – Software Innovation Solutions* > > > > *M* +1 303-725 8163 > > bill.dossett(a)pb.com > > pitneybowes.com > > > *Pitney Bowes* > > 4750 Walnut Street > > Boulder CO, 80301 > > [image: sis] > > Learn more about Software Innovation Solutions > <http://teamsite.inside.pb.com/sites/TCPPM/GES/SitePages/Home.aspx> > > > > In Engineering, Software Support or Professional Services? > > *Raise a ticket via Remedy Anywhere [HERE > <http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIn…>] > takes less than a minute* > > > > *CloudForms User Guide available [HERE > <https://teamsite.inside.pb.com/sites/TCPPM/GES/SiteAssets/TC%20Knowledge%20…>]* > > > > > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/AR3D4HLVTAQPE… >

4 5

Migrating Legacy Hyperconverged Legacy switch type to OVS
by Mike 01 Aug '18

01 Aug '18

Spent the better part of a day trying to figure out how to bridge OVN networks with physical networks, only to later find out that "Attach to physical network" has zero effect in a Legacy cluster... which started me down the rabbit hole of "how do I switch the Default cluster to be OVS" Then, I come up with the bright idea that I'm going to create a new OVS cluster and migrate all the hosts there, well in order to do that you might: 1. Put the Host into maintenance 2. Install to UNDEPLOY the hosted engine 3. Remove the host from the cluster 4. Add the host to the new OVS cluster However this has a nasty bug where the required networks won't ever sync I believe because of some QoS settings (even though I haven't set that), so host is not able to reach gluster storage, and this was not one of the 3 replicas, it was just a client So moving on just to test the waters with another angle, I UNDEPLOY on one of the gluster servers, and then and only then after waiting however long it took to install/undeploy, does it tell me that It can't remove this host from the cluster because it holds gluster volumes......... How in the heck can I migrate what I have on Default to use native OVS? Let's say I started fresh (I'm using oVirt Node 4.2.5) since I have that option....I don't ever recall there being an option to select OVS as the hosted-engine switch type, and it of course sets up the Default cluster for you - which is the one I'm having issues with because it's legacy by default. Thanks

1 0

AAA question...takes long time to log in
by sipandbite＠hotmail.com 31 Jul '18

31 Jul '18

I work at a company with a massive AD infrastructure. Is there any way to specify a specific OU to search through instead of just providing a top level DN? We use sssd for all our authing needs on our linux machines and would like to do something like below: ldap_user_search_base = OU=Employees,OU=blah users,DC=blah,DC=com enumerate = false When I connect on cli it looks like Ovirt is reaching out and grabbing a ton of info it doesn't really need. It takes on average 40 second to allow me to log in on CLI or UI. This is not an AD issue as we use AD on everything in our labs and have no issues with speed. I applied these changes and it didn't speed anything up. https://ovirt.org/develop/release-management/features/infra/aaa_faq/ I can see from a tcpdump that I am in fact hitting my local AD servers and not going across the world to get an answer. Thanks!

4 6

Direct LUNs and VM Pauses
by Ryan Bullock 31 Jul '18

31 Jul '18

Hello All, We recently stood up a new Ovirt install backed by an ISCSI SAN and it has been working great, but there are a few quirks I am trying to iron out. We have run into an issue where when we fail-over our SAN (for maintenance, or otherwise) any VM with a Direct LUN gets paused and doesn’t resume. VMs without a direct LUN never paused. Digging through posts on this list and reading some bug reports, it seems like this a known quirk with how Ovirt handles Direct LUNs (it doesn't monitor the LUNs and so it wont resume the VM). To get the VMs to automatically restart I have attached VM leases to them and that seems to work fine, not as nice as a pause and resume, but it minimizes downtime. What I’m trying to understand is why the VMs with Direct LUNs paused, and ones without didn’t. My only speculation is that since the Non-Direct is using LVM on top of ISCSI, that LVM is adding its own layer of timeouts that cause it to mask the outage? My other question is, how can I keep my VMs with Direct LUNs from pausing during short outages? Can I put configurations in my multipath.conf for just the wwids of my Direct LUNs to increase the ‘no_path_retry’ to prevent the VMs from pausing in the first place? I know in general you don’t want to increase the ‘no_path_retry’ because it can cause timeout issues with VDSM and SPM operations (LVM changes, etc). But in the case of a Direct LUN would it cause any problems? Thank you, Ryan

2 4

Extended DPDK support in oVirt[0]
by Leon Goldberg 31 Jul '18

31 Jul '18

Hi, oVirt support for DPDK was introduced in 2017[1], and is now enhanced in terms of deployment via Ansible[2] and usage via OVN. Compatible hosts and NICs can now be easily configured to use userspace drivers, while usage is enhanced via OVN, allowing for both increased performance and SDN usability. For additional information and instructions, please refer to this blog post[0]. [0] https://www.ovirt.org/blog/2018/07/ovn-dpdk/ [1] https://www.ovirt.org/blog/2017/09/ovs-dpdk/ [2] https://github.com/ovirt/ovirt-ansible-dpdk-setup/

1 0

API for attaching the ISO image and virtual floppy disk to the VM
by Hari Prasanth Loganathan 31 Jul '18

31 Jul '18

Hi Team, 1) I use the following oVirt API to attach the ISO image to the virtual machine. URL: https://X.X.X.X/ovirt-engine/api/vms/625871af-180c-4e63-8813-93963907ed17/c… <https://172.30.60.45/ovirt-engine/api/vms/625871af-180c-4e63-8813-93963907e…> Method Type : POST *PUT DATA* : { "file": { "id": "Windows_7_64-bit_Professional_x64 SP1.iso" } } 2) But If I want to assign the virtual floppy disk to the virtual machine, like below, *Is there a way to attach it*? URL: https://X.X.X.X/ovirt-engine/api/vms/625871af-180c-4e63-8813-93963907ed17/c… <https://172.30.60.45/ovirt-engine/api/vms/625871af-180c-4e63-8813-93963907e…> Method Type : POST *PUT DATA* : { "file": { "id": "virto-win.vdf" } } *NOTE*: I am able to set the boot sequence using oVirt UI, like below, where I am able to attach the virtual Floppy Disk and as well as ISO image. -- DISCLAIMER - *MSysTechnologies LLC* This email message, contents and its attachments may contain confidential, proprietary or legally privileged information and is intended solely for the use of the individual or entity to whom it is actually intended. If you have erroneously received this message, please permanently delete it immediately and notify the sender. If you are not the intended recipient of the email message,you are notified strictly not to disseminate,distribute or copy this e-mail.E-mail transmission cannot be guaranteed to be secure or error-free as Information could be intercepted, corrupted, lost, destroyed, incomplete or contain viruses and MSysTechnologies LLC accepts no liability for the contents and integrity of this mail or for any damage caused by the limitations of the e-mail transmission.

2 1

Hosted Engine deploy failed on new HCI build
by Jayme 31 Jul '18

31 Jul '18

Latest version of oVirt node 4.2 installed on three hosts. I completed successfully the cockpit gdeploy process to deploy HCI. All of that went well with no errors. I then proceeded to the hosted engine deployment step which eventually failed (log attached). This is the current status: --== Host 1 status ==-- conf_on_shared_storage : True Status up-to-date : True Hostname : MASKED Host ID : 1 Engine status : {"reason": "failed liveliness check", "health": "bad", "vm": "up", "detail": "Up"} Score : 3400 stopped : False Local maintenance : False crc32 : 3fa48e03 local_conf_timestamp : 8468 Host timestamp : 8468 Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=8468 (Mon Jul 30 14:21:09 2018) host-id=1 score=3400 vm_conf_refresh_time=8468 (Mon Jul 30 14:21:09 2018) conf_on_shared_storage=True maintenance=False state=EngineStarting stopped=False If I do hosted-engine --console I get: The engine VM is running on this host Connected to domain HostedEngine Escape character is ^] error: internal error: cannot find character device <null> does anyone know why it may have failed or what I could do to recover from this? I'm thinking it could have potentially failed due to some problem with network config. If I could get a console in to the engine VM I might be able to fix it but that serial error above is preventing me from reaching the vm console to diagnose further. Log of deploy attached: Thanks!

3 6

Re: Disk Statistics API in oVirt
by Karli Sjöberg 31 Jul '18

31 Jul '18

4 7

NFS Mount on EMC VNXe3200 / User - Group 36:36 / Permission issue
by jeanbaptiste＠nfrance.com 31 Jul '18

31 Jul '18

Hello, I try to mount an NFS Data share from a EMC VNXe3200 export. Unfortunately, NFS share cannot be mount, there is permission error. (Indeed, after the same issue on another NFS ISO repo, I’ve change exported directory user/group to 36:36, and O-Virt NFS mount was great). So, I think issue with my VNXe3200 is regarding UID / GID owner on VNXe3200 side. After webex with EMC support, change owner / permission on VNXe side seems not possible / supported. Can I mount the NFS share with some options to avoid vdsm:kvm mounting issue ? Can I force mount with root ? Regards, Jean-Baptiste,

2 2

Upgrade from 4.1 to 4.2 failing - SQL Issues
by Sven Achtelik 31 Jul '18

31 Jul '18

Hi All, I'm still struggling to upgrade from 4.1 to 4.2 and the root cause seems to be the SQL upgrade. I installed my 4.1.9 with the engine appliance image and restored a DB to it. My Upgrade to 4.2 is failing with the errors below: -------------------------------- Performing Consistency Checks ----------------------------- Checking cluster versions ok Checking database user is the install user ok Checking database connection settings ok Checking for prepared transactions ok Checking for reg* system OID user data types ok Checking for contrib/isn with bigint-passing mismatch ok Checking for invalid "line" user columns ok Creating dump of global objects ok Creating dump of database schemas engine ovirt_engine_history postgres template1 ok encodings for database "template1" do not match: old "UTF8", new "SQL_ASCII" Failure, exiting I tried everything that could do and I also tried to find a solution on google to make this work. Could someone with DB knowhow please advise on the next steps to resolve this ? I really would like to upgrade somehow. Thank you, Sven

4 21

adding hosts problems with GlusterFS
by william.dossett＠gmail.com 30 Jul '18

30 Jul '18

Hi, I setup my 3 host HCI cluster and things are going pretty good. I have a few issues though... one of them is that I added two more hosts to the three node cluster to make it a 5 nodes. This seemed to work fine until I went to create bricks. I have 6 x 2 TB disks for use as JBOD in each node. After I added the nodes, I went to the host and storage devices. This looks significantly different that the view on my first 3 hosts. On the two new hosts all my drives sdb - sdg have locks next to them and file system type is multipath__member. Further up the page then I see a UID under the name and description is PERC H710P dm-multipath - no lock next to it. I created a brick on this and it created the lvmpv file system, however when I go to bricks view, there are no bricks. So, did I make a mistake while adding the hosts? is there some way to prevent this dm-multipath configuration? Thanks Bill

2 4

[ANN] oVirt 4.2.5 is now generally available (fixed links)
by Lev Veyde 30 Jul '18

30 Jul '18

The oVirt Project is pleased to announce the general availability of oVirt 4.2.5 as of July 30th, 2018 This update is the fifth release in a series of stabilization updates to the 4.2 series. This release is available now for: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later * oVirt Node 4.2 See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node is available [2] Additional Resources: * Read more about the oVirt 4.2.5 release highlights: http://www.ovirt.org/release/4.2.5/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.5/ [2] http://resources.ovirt.org/pub/ovirt-4.2/iso/ -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

[ANN] oVirt 4.2.5 is now generally available
by Lev Veyde 30 Jul '18

30 Jul '18

The oVirt Project is pleased to announce the general availability of oVirt 4.2.5 as of July 30th, 2018 This update is the fifth release in a series of stabilization updates to the 4.2 series. This release is available now for: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later * oVirt Node 4.2 See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node is available [2] Additional Resources: * Read more about the oVirt 4.2.3 release highlights: http://www.ovirt.org/release/4.2.3/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.3/ [2] http://resources.ovirt.org/pub/ovirt-4.2/iso/ -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

Re: adding hosts problems with GlusterFS
by Bill Dossett 30 Jul '18

30 Jul '18

Hmm, resounding silence.... Have attached a screen shot of the host storage devices on the host I added after the initial deployment. So at the bottom you can see that sdb - sdg are all locked and FS type is multipath_member those all equate to the UID type NAME at the top. The very top row, I created a brick, so it is also now locked, however when I go to brick view there is no brick. I also can't seem to delete any brick one it is created either. On the first 3 hosts, sdb - sdg are all unlocked and I can create bricks... going to remove a host and re-add it to see if there is anything I am missing, but I don't have any other ideas at this point. [cid:image001.png@01D427F6.9CDACC90] Regards, Bill Bill Dossett DevOps Ninja AWS-DevOps-Pro<https://aws.amazon.com/certification/certified-devops-engineer-professional/>, AWS-SA-A<https://aws.amazon.com/certification/certified-solutions-architect-associat…> VCAP-DCA<http://mylearn.vmware.com/mgrReg/plan.cfm?plan=30483&ui=www_cert>, VCAP-DCD<http://mylearn.vmware.com/mgrReg/plan.cfm?plan=30484&ui=www_cert>, MCSA Win Server IT - Software Innovation Solutions M +1 303-725 8163 bill.dossett(a)pb.com<mailto:bill.dossett@pb.com> pitneybowes.com Pitney Bowes 4750 Walnut Street Boulder CO, 80301 [sis] Learn more about Software Innovation Solutions<http://teamsite.inside.pb.com/sites/TCPPM/GES/SitePages/Home.aspx> In Engineering, Software Support or Professional Services? Raise a ticket via Remedy Anywhere [HERE<teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.…>] takes less than a minute CloudForms User Guide available [HERE<https://teamsite.inside.pb.com/sites/TCPPM/GES/SiteAssets/TC%20Knowledge%20…>]

1 0

up and running with ovirt 4.2 and gluster
by william.dossett＠gmail.com 30 Jul '18

30 Jul '18

Hi, I have my ovirt 4.2 hci cluster up and running, but I have a probably stupid question. During the setup and in the documents it defaults to setting up the engine datastore/volume, a VMstore/volume and a data/volume. What is the Data volume for? I am planning on running VMs on this so I would assume I need VMstore and that's what I will grow on my system. In previous installs you had the opportunity to create the ISO domain, but not now. I can see how to create in the engine UI so that's fine, but I am just wondering what people use the Data volume for as an example. Thanks Bill

7 25

Import Netapp snapshot volume into ovirt and start VM from volume snapshot
by Igor Zinovik 30 Jul '18

30 Jul '18

Hello. I'm trying to implement following backup scenario for my VMs: storage domain is a volume on netapp appliance connected to oVirt cluster via NFS3. Netapp produces its zero copy snapshots of this volume. I want to be able to restore VMs from these snapshots, e.g. Netapp can export snapshot to ovirt as another NFS volume after that I want to be able to import VM or attach VM disks from snapshot volume to VM and start it. As far as I understand it is basic backup|migration scenario when user wants to move VMs from one ovirt DC to another ovirt DC. Right now I cannot import snapshot volume which contains exactly same domain metadata (in dom_dm/ directory) as original volume (which I cannot detach since it hosts disks for running VMs). I tried to rename dom_md/, but with no success in domain import process. Maybe someone in this list uses same scenario for VM backup and can give some advice.

2 3

VM User with UserRole missing permissions to activate console and other actions
by Callum Smith 30 Jul '18

30 Jul '18

Dear All, Please see the errors below. I'm seeing this in the engine.log when as a user I'm trying to activate either a VM console or reboot a VM which I have access to as a user ("UserRole permission assigned to VM). 2018-07-18 10:51:33,554+01 INFO [org.ovirt.engine.core.bll.aaa.CreateUserSessionCommand] (default task-9) [557ca876] Running command : CreateUserSessionCommand internal: false. 2018-07-18 10:51:33,575+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-9) [557ca876] E VENT_ID: USER_VDC_LOGIN(30), User callum@Biomedical Research Computing connecting from '192.168.1.241' using session 'wiWA25wdaRP1zay iyTSGBJKpvi89LdzgKqeX12BcZhNVhpV2BIA+zkAnT50xOSDglxnhfAi3S2ZiODls8JYFUA==' logged in. 2018-07-18 10:51:34,135+01 ERROR [org.ovirt.engine.core.bll.GetSystemStatisticsQuery] (default task-5) [8d830cdb-fc11-4e68-94e6-73309 65c4488] Query execution failed due to insufficient permissions. 2018-07-18 10:51:34,205+01 ERROR [org.ovirt.engine.core.bll.GetPermissionsForObjectQuery] (default task-26) [ba1825f1-60fb-44cd-8b57- ea701cf698c0] Query execution failed due to insufficient permissions. 2018-07-18 10:51:34,242+01 ERROR [org.ovirt.engine.api.restapi.resource.AbstractBackendResource] (default task-26) [] Operation Faile d: query execution failed due to insufficient permissions. 2018-07-18 10:51:34,389+01 ERROR [org.ovirt.engine.core.bll.storage.domain.GetStorageDomainListByIdQuery] (default task-17) [02965366 -44b0-4370-ab83-4781065e46c2] Query execution failed due to insufficient permissions. 2018-07-18 10:51:34,393+01 ERROR [org.ovirt.engine.core.bll.storage.domain.GetStorageDomainListByIdQuery] (default task-17) [02965366 -44b0-4370-ab83-4781065e46c2] Query execution failed due to insufficient permissions. 2018-07-18 10:51:34,394+01 ERROR [org.ovirt.engine.core.bll.storage.domain.GetStorageDomainListByIdQuery] (default task-17) [02965366 -44b0-4370-ab83-4781065e46c2] Query execution failed due to insufficient permissions. 2018-07-18 10:51:34,396+01 ERROR [org.ovirt.engine.core.bll.storage.domain.GetStorageDomainListByIdQuery] (default task-17) [02965366 -44b0-4370-ab83-4781065e46c2] Query execution failed due to insufficient permissions. 2018-07-18 10:51:59,195+01 WARN [org.ovirt.engine.core.bll.SetVmTicketCommand] (default task-18) [7881a832] User '9386d6f5-f172-4cdb -abca-62492a357888' is trying to take the console of virtual machine 'ddb23e0a-01d5-403c-89ab-37c400d2c938', but the console is alrea dy taken by user 'd021fc10-4f7c-11e8-88cb-00163e6a7aff'. 2018-07-18 10:51:59,197+01 INFO [org.ovirt.engine.core.bll.SetVmTicketCommand] (default task-18) [7881a832] No permission found for user '9386d6f5-f172-4cdb-abca-62492a357888' or one of the groups he is member of, when running action 'SetVmTicket', Required permiss ions are: Action type: 'USER' Action group: 'RECONNECT_TO_VM' Object type: 'VM' Object ID: 'ddb23e0a-01d5-403c-89ab-37c400d2c938'. 2018-07-18 10:51:59,197+01 WARN [org.ovirt.engine.core.bll.SetVmTicketCommand] (default task-18) [7881a832] Validation of action 'Se tVmTicket' failed for user callum@Biomedical Research Computing. Reasons: VAR__ACTION__SET,VAR__TYPE__VM_TICKET,USER_CANNOT_FORCE_REC ONNECT_TO_VM 2018-07-18 10:51:59,198+01 ERROR [org.ovirt.engine.api.restapi.resource.BackendVmGraphicsConsoleResource] (default task-18) [] Operat ion Failed: USER_CANNOT_FORCE_RECONNECT_TO_VM Regards, Callum -- Callum Smith Research Computing Core Wellcome Trust Centre for Human Genetics University of Oxford e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk>

4 6

oVirt 4.2.5.1-1.el7 JSON-RPC statistics error
by Maton, Brett 30 Jul '18

30 Jul '18

I've got one physical host in a 3 host CentOS7.5 cluster that reports the following error several times a day VDSM node3.example.com command Get Host Statistics failed: Internal JSON-RPC error: {'reason': '<Fault 1: "<type \'exceptions.AttributeError\'>:\'NoneType\' object has no attribute \'statistics\'">'} Any ideas what the problem might be?

3 15

Re: Hosted Engine Deploy kernel panics on boot
by Karli Sjöberg 30 Jul '18

30 Jul '18

2 2

Fwd: Re: up and running with ovirt 4.2 and gluster
by Jayme 30 Jul '18

30 Jul '18

---------- Forwarded message --------- From: Jayme <jaymef(a)gmail.com> Date: Sun, Jul 29, 2018, 10:09 PM Subject: Re: [ovirt-users] Re: up and running with ovirt 4.2 and gluster To: Mike <xenithorb(a)fedoraproject.org> On this same subject one thing I'm currently hung up on re: HCI setup is the next step in the cockpit config for glusterfs. I have three nodes setup with two drives each in jbod. On the brick config screen you have to specify the device location and size of each of the volumes you configure on the previous step i.e engine and data. It seems that I can only specify one of my drives for the data volume. So I'd have to pick /dev/SDA drive for engine and /dev/sdb for data, but I have 2x2tb drives what do I do with all the other space on the devocd I put the engine volume on? If I choose to use sdb for data and have it 1.8tb does that mean the data storage will only use one single drive in each of my three nodes? I want to make use of all six drives to increase I/o performance. I don't understand how the jbod config of gluster is suppose to work. What if I had even more drives in each node say 4 separate drives how would I make use of all drives when I can only specify one device for each volume? I'm thinking about creating a data and data2 volume and specifying SDA for data and sdb for data2. Am I completely misunderstanding the setup here. Its very confusion and there is next to no documentation on HCI available. On Sun, Jul 29, 2018, 6:34 PM Mike, <xenithorb(a)fedoraproject.org> wrote: > > Why would they be setup by default via the cockpit if they are no longer > > needee? > > > > On Sat, Jul 28, 2018, 1:13 PM femi adegoke, <ovirt(a)fateknollogee.com> > wrote: > > I agree, that step alone is very confusing > > - vmstore is/was "export" and is no longer needed > - iso domains are no longer needed > - The only domains you need in the HCI setup are :/data and :/engine > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/3HL7XGWWTZ6WB… >

2 1

Hosted engine unaviable after storage rebuild
by sebastian.w＠gmx.ch 29 Jul '18

29 Jul '18

Hello all, My hosted engine does not start up anymore, because the node can't reach the storage. The hosted engine configuration has not been retrieved from shared storage. Please ensure that ovirt-ha-agent is running and the storage server is reachable. What happend is that my NAS crashed and I had to rebuild it from the backup. I'm quit sure that I called all the NFS shares the same way as they bevore the issue. How can I figure out whats the issue with the storage? The logs wheren't realy helpful for me (but may it's me and not the logs to blame) Regards and thanks Sebi

2 4

Changing Network Interfaces on host causes bond to go offline
by oBSD Nub 29 Jul '18

29 Jul '18

Everytime I try to change assigned Logical networks (add ip addresses, assign a logical network, etc) the bond0 interface winds up going down. I have to do a ifup bond0 from the console, and the engine reconnects. After a lot of digging, I think this is the offending command, but I don't know how to read it or next troubleshooting steps. Anyone want to point me in the right direction? Thanks! 2018-07-28 18:07:36,661-0500 WARN (vdsm.Scheduler) [Executor] Worker blocked: <Worker name=jsonrpc/6 running <Task <JsonRpcTask {'params': {u'connectionParams': [{u'netIfaceName': u'bond0.3001', u'id': u'0808bc71-b5f7-4886-9dc8-e21b0d2abf14', u'connection': u'192.168.200.81', u'iqn': u'iqn.2002-10.com.infortrend:raid.uid577981.001', u'user': u'', u'tpgt': u'1', u'ifaceName': u'bond0.3001', u'password': '********', u'port': u'3260'}, {u'netIfaceName': u'bond0.3002', u'id': u'77c7e9dd-cd46-48be-ade1-06645772c405', u'connection': u'192.168.200.81', u'iqn': u'iqn.2002-10.com.infortrend:raid.uid577981.001', u'user': u'', u'tpgt': u'1', u'ifaceName': u'bond0.3002', u'password': '********', u'port': u'3260'}], u'storagepoolID': u'2cde92be-7b43-11e8-b08d-00505690367f', u'domainType': 3}, 'jsonrpc': '2.0', 'method': u'StoragePool.connectStorageServer', 'id': u'9a414389-2b42-4a20-b59c-c3bc9d19c7b4'} at 0x7f29980cdcd0> timeout=60, duration=60 at 0x7f29980cdfd0> task#=4 at 0x7f299837af10>, traceback: File: "/usr/lib64/python2.7/threading.py", line 785, in __bootstrap self.__bootstrap_inner() File: "/usr/lib64/python2.7/threading.py", line 812, in __bootstrap_inner self.run() File: "/usr/lib64/python2.7/threading.py", line 765, in run self.__target(*self.__args, **self.__kwargs) File: "/usr/lib/python2.7/site-packages/vdsm/common/concurrent.py", line 194, in run ret = func(*args, **kwargs) File: "/usr/lib/python2.7/site-packages/vdsm/executor.py", line 301, in _run self._execute_task() File: "/usr/lib/python2.7/site-packages/vdsm/executor.py", line 315, in _execute_task task() File: "/usr/lib/python2.7/site-packages/vdsm/executor.py", line 391, in __call__ self._callable() File: "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 523, in __call__ self._handler(self._ctx, self._req) File: "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 566, in _serveRequest response = self._handle_request(req, ctx) File: "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 606, in _handle_request res = method(**params) File: "/usr/lib/python2.7/site-packages/vdsm/rpc/Bridge.py", line 197, in _dynamicMethod result = fn(*methodArgs) File: "/usr/lib/python2.7/site-packages/vdsm/API.py", line 1070, in connectStorageServer connectionParams) File: "/usr/lib/python2.7/site-packages/vdsm/storage/dispatcher.py", line 73, in wrapper result = ctask.prepare(func, *args, **kwargs) File: "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 108, in wrapper return m(self, *a, **kw) File: "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 1179, in prepare result = self._run(func, *args, **kwargs) File: "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 882, in _run return fn(*args, **kargs) File: "<string>", line 2, in connectStorageServer File: "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 48, in method ret = func(*args, **kwargs) File: "/usr/lib/python2.7/site-packages/vdsm/storage/hsm.py", line 2395, in connectStorageServer conObj.connect() File: "/usr/lib/python2.7/site-packages/vdsm/storage/storageServer.py", line 487, in connect iscsi.addIscsiNode(self._iface, self._target, self._cred) File: "/usr/lib/python2.7/site-packages/vdsm/storage/iscsi.py", line 217, in addIscsiNode iscsiadm.node_login(iface.name, target.address, target.iqn) File: "/usr/lib/python2.7/site-packages/vdsm/storage/iscsiadm.py", line 327, in node_login portal, "-l"]) File: "/usr/lib/python2.7/site-packages/vdsm/storage/iscsiadm.py", line 122, in _runCmd return misc.execCmd(cmd, printable=printCmd, sudo=True, sync=sync) File: "/usr/lib/python2.7/site-packages/vdsm/common/commands.py", line 80, in execCmd (out, err) = p.communicate(data) File: "/usr/lib64/python2.7/site-packages/subprocess32.py", line 924, in communicate stdout, stderr = self._communicate(input, endtime, timeout) File: "/usr/lib64/python2.7/site-packages/subprocess32.py", line 1706, in _communicate orig_timeout) File: "/usr/lib64/python2.7/site-packages/subprocess32.py", line 1779, in _communicate_with_poll ready = poller.poll(self._remaining_time(endtime)) (executor:363)

1 0

Re: NFS Storage Advice?
by Karli Sjöberg 28 Jul '18

28 Jul '18

1 0

Re: NFS Storage Advice?
by Karli Sjöberg 28 Jul '18

28 Jul '18

3 2

Re: NFS Storage Advice?
by Karli Sjöberg 28 Jul '18

28 Jul '18

2 1

NFS Storage Advice?
by Wesley Stewart 28 Jul '18

28 Jul '18

I currently have a NFS server with decent speeds. I get about 200MB/s write and 400+ MB/s read. My single node oVirt host has a mirrored SSD store for my Windows 10 VM, and I have about 3-5 VMs running on the NFS data store. However, VM/s on the NFS datastore are SLOW. They can write to their own disk around 10-50 MB/s. However a VM on the mirrored SSD drives can get 150-250 MB/s transfer speed from the same NFS storage (Through NFS mounts). Does anyone have any suggestions on what I could try to speed up the NFS storage for the VMs? My single node ovirt box has a 1ft Cat6 crossover cable plugged directly into my NFS servers 10GB port. Thanks!

2 1

Spice console pixelated noise on display changes
by Mitja Mihelič 28 Jul '18

28 Jul '18

Dear all, We are running the following setup: ovirt-engine host: - CentOS release 7.5.1804 - ovirt-engine-4.1.9.1-1.el7.centos.noarch - spice-html5-0.1.7-1.el7.noarch We have noticed problems with the Spice console. When it opens and displays the information presented by the VM's console it is OK at first. But as soon as any part of the display changes, that part gets replaced by random pixelated noise. For example I open the console of a standard CentOS server. When I type something at the login prompt the text is invisible and random pixels are displayed at the position of the blinking cursor. Please see attached screenshot spice-1-login_typing_and_cursor_waiting.png. Please also see other the attached screenshots. Login prompt after VM reboot: spice-2-login_after_boot.png Login prompt after hitting Enter a few times: spice-3-login_2x_enter.png We have tried and succesfully reproduced the issue on OSX (Chrome, FF, Safari) and Windows (Chrome, FF). VNC works fine. Why would this be happening? Help would be very much appreciated. Kind regards, Mitja -- Mitja Mihelič ARNES, Tehnološki park 18, p.p. 7, SI-1001 Ljubljana, Slovenia tel: +386 1 479 8877, fax: +386 1 479 88 7

3 6

Re: VM Portal
by carl langlois 27 Jul '18

27 Jul '18

You have a good point, my mistake. Thanks for your help Le ven. 27 juill. 2018 01 h 17, Michal Skrivanek < michal.skrivanek(a)redhat.com> a écrit : > > > On 26 Jul 2018, at 23:58, Greg Sheremeta <gshereme(a)redhat.com> wrote: > > On Thu, Jul 26, 2018 at 11:28 AM carl langlois <crl.langlois(a)gmail.com> > wrote: > >> yes it is an upgrade. My current web-ui version is >> >> ovirt-web-ui.noarch 1.3.9-1.el7.centos >> @ovirt-4.2 >> >> and my engine package is >> >> ovirt-engine.noarch 4.2.0.2-1.el7.centos >> > > ^^ Hmm, that should be 4.2.4 too. When did you upgrade? > > @Michal Skrivanek <mskrivan(a)redhat.com> have you seen this behavior? > > > Run engine-setup, not yum update > > > >> >> >> On Thu, Jul 26, 2018 at 11:12 AM, Greg Sheremeta <gshereme(a)redhat.com> >> wrote: >> >>> Is this an upgrade? We did have a bug where ovirt-web-ui wasn't getting >>> upgraded properly. You can yum/dnf update it and try again. >>> >>> On Thu, Jul 26, 2018 at 10:58 AM carl langlois <crl.langlois(a)gmail.com> >>> wrote: >>> >>>> Hi, >>>> >>>> Yes my user should have permission to see the VM since it is in the VM >>>> permission table >>>> >>>> I have look at the version from the web ui and it says >>>> Software Version:4.2.0.2-1.el7.centos >>>> >>>> <image.png> >>>> >>>> why it is not 4.2.4 >>>> >>>> my repo in the engine VM is >>>> [ovirt-4.2] >>>> name=Latest oVirt 4.2 Release >>>> #baseurl=http://resources.ovirt.org/pub/ovirt-4.2/rpm/el$releasever/ >>>> mirrorlist=http://resources.ovirt.org/pub/yum-repo/mirrorlis >>>> t-ovirt-4.2-el$releasever >>>> enabled=1 >>>> skip_if_unavailable=1 >>>> gpgcheck=1 >>>> >>>> >>>> Thanks >>>> Regards >>>> >>>> >>>> >>>> On Thu, Jul 26, 2018 at 10:47 AM, Greg Sheremeta <gshereme(a)redhat.com> >>>> wrote: >>>> >>>>> >>>>> >>>>> On Thu, Jul 26, 2018 at 7:52 AM carl langlois <crl.langlois(a)gmail.com> >>>>> wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> I know thta the VM portal add issue with displaying user VMs. It seem >>>>>> to be fix with this bug >>>>>> *https://bugzilla.redhat.com/show_bug.cgi?id=148087 >>>>>> <https://bugzilla.redhat.com/show_bug.cgi?id=148087>* >>>>>> >>>>>> >>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1480877 (you missed a 7 >>>>> :)) >>>>> >>>>> >>>>>> But if i try the portal does not show anything, My engine is up to >>>>>> date with 4.2 repo. It this still a issue? >>>>>> >>>>> >>>>> Yes, that code is released and it should be working. Can you describe >>>>> your permissions? Does your user have permissions to see the vm? >>>>> >>>>> >>>>>> >>>>>> Thanks >>>>>> _______________________________________________ >>>>>> Users mailing list -- users(a)ovirt.org >>>>>> To unsubscribe send an email to users-leave(a)ovirt.org >>>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>>>>> oVirt Code of Conduct: https://www.ovirt.org/communit >>>>>> y/about/community-guidelines/ >>>>>> List Archives: https://lists.ovirt.org/archiv >>>>>> es/list/users(a)ovirt.org/message/AMNEI773NCIYNZKSOBE7CTEHMJHFE5JD/ >>>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> GREG SHEREMETA >>>>> >>>>> SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX >>>>> >>>>> Red Hat NA >>>>> >>>>> <https://www.redhat.com/> >>>>> >>>>> gshereme(a)redhat.com IRC: gshereme >>>>> <https://red.ht/sig> >>>>> >>>> >>>> >>> >>> -- >>> >>> GREG SHEREMETA >>> >>> SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX >>> >>> Red Hat NA >>> >>> <https://www.redhat.com/> >>> >>> gshereme(a)redhat.com IRC: gshereme >>> <https://red.ht/sig> >>> >> >> >

1 0

update cluster 4.1 to 4.2
by p.staniforth＠leedsbeckett.ac.uk 27 Jul '18

27 Jul '18

Hello, When I try to update my default cluster to 4.2 it fails with Failed to update Host cluster (User: admin@internal-authz) I get a lot of errors ERROR [org.ovirt.engine.core.bll.UpdateVmCommand] (Transaction Reaper Worker 0) [] Transaction rolled-back for command 'org.ovirt.engine.core.bll.UpdateVmCommand' Thanks, Paul S.

3 4

Understanding JBOD brick configuration
by Jayme 27 Jul '18

27 Jul '18

I'm deploying three host Ovirt HCI and I'm a bit confused about how to configure the glusterFS volumes and bricks in the cockpit. My three hosts are configured the exact same way physically: 2x250GB SSDs in Raid 1 for OS 2 x 2TB SSD in JBOD which I intend to use for Gluster (devices sda and sdb) So on Step 3 (Volumes) of gluster deployment I'm leaving the volumes default (with no arbiter as I want replica 3). So that is creating a volume for Engine, Data and VMstore On step 4 (Bricks) I'm choosing jbod and next is where I'm getting confused. I have to specify the device name and size for each volume. It appears that I have to break up sda and sdb devices here. I have 4 TB total between the two JBOD drives but does that mean I can only specify up to 2TB usable for the data volume (on either sda or sdb) then split the space on the second 2TB drive between engine and vmstore? If so this seems like an awful waste of a 2TB drive for use for only engine and vmstore volumes. With my JBOD configuration of two separate disks per hosts is there any way I can have a data volume use most of that space say 3.5TB and the rest goes to engine/vmstore? It was my understanding that glusterFS would pool all available space together and I could use it however I wanted. Can I achieve this without putting the 2TB disks in to a raid configuraiton? Thanks!

2 2

trunked ports
by william.dossett＠gmail.com 27 Jul '18

27 Jul '18

Hi, I setup oVirt a few years back. now that the HCI is real, I am revisiting it. I have deployed with Gluster, and am now moving on to networking. I come from a VMware shop and normally we trunk all the network ports exposing all VLANs to the hosts and place VMs in Portgoups that are tagged with VLANs. I did manage to do this years back but I am struggling to get this to work today. I had pretty limited hardware back then and I thought I installed using vlan tagging and trunked ports, but I don't see any option to do this using the glusterfs and hosted engine setup. Each host has a dual port 10Gb NICs I use one for storage that is connected to my storage network and one for ovirtmgmt. (I need to add another of these for redundancy down the road, but no money for that at the moment) The hosts also have 4 x 1Gb ports. So in lieu of being able to configure vlan tagging to trunked ports on hosted engine deploy, I am considering cabling up a 1 Gb port on each in my management services VLAN and when it is all up and running create another logical network (or several of them as I think these equate to what is a vlan tagged port group in VMware) with the 10Gb NIC backing for VMs. Does that sound reasonable? Or if anyone can point me to any docs that describe how to deploy to a specific VLAN with trunk ports, that would be nice as well as I won't have to actually go to the office and run additional cables. Appreciate any advice Bill

3 3

Re: can't connect to spice console
by Deekshith 27 Jul '18

27 Jul '18

Dear Team Please help me to solve this problem. Regards Deekshith

1 0

Do you need to format/mount bricks before deploying HCI?
by Jayme 27 Jul '18

27 Jul '18

I'm building a 3 host HCI configuration. I have servers configured and latest version of oVirt node 4.2 installed. I'm preparing to run the cockpit hosted engine + glusterFS deploy. Each of my hosts have two SSDs in JBOD /dev/sda and /dev/sdb Currently these drives have not been touched, formatted or mounted. Is this required before continuing with the deploy, or will the deploy script format and mount the drives accordingly? Thanks!

2 1

Re: VM Portal
by Greg Sheremeta 26 Jul '18

26 Jul '18

On Thu, Jul 26, 2018 at 11:28 AM carl langlois <crl.langlois(a)gmail.com> wrote: > yes it is an upgrade. My current web-ui version is > > ovirt-web-ui.noarch 1.3.9-1.el7.centos > @ovirt-4.2 > > and my engine package is > > ovirt-engine.noarch 4.2.0.2-1.el7.centos > ^^ Hmm, that should be 4.2.4 too. When did you upgrade? @Michal Skrivanek <mskrivan(a)redhat.com> have you seen this behavior? > > > On Thu, Jul 26, 2018 at 11:12 AM, Greg Sheremeta <gshereme(a)redhat.com> > wrote: > >> Is this an upgrade? We did have a bug where ovirt-web-ui wasn't getting >> upgraded properly. You can yum/dnf update it and try again. >> >> On Thu, Jul 26, 2018 at 10:58 AM carl langlois <crl.langlois(a)gmail.com> >> wrote: >> >>> Hi, >>> >>> Yes my user should have permission to see the VM since it is in the VM >>> permission table >>> >>> I have look at the version from the web ui and it says >>> Software Version:4.2.0.2-1.el7.centos >>> >>> >>> >>> why it is not 4.2.4 >>> >>> my repo in the engine VM is >>> [ovirt-4.2] >>> name=Latest oVirt 4.2 Release >>> #baseurl=http://resources.ovirt.org/pub/ovirt-4.2/rpm/el$releasever/ >>> mirrorlist= >>> http://resources.ovirt.org/pub/yum-repo/mirrorlist-ovirt-4.2-el$releasever >>> enabled=1 >>> skip_if_unavailable=1 >>> gpgcheck=1 >>> >>> >>> Thanks >>> Regards >>> >>> >>> >>> On Thu, Jul 26, 2018 at 10:47 AM, Greg Sheremeta <gshereme(a)redhat.com> >>> wrote: >>> >>>> >>>> >>>> On Thu, Jul 26, 2018 at 7:52 AM carl langlois <crl.langlois(a)gmail.com> >>>> wrote: >>>> >>>>> Hi, >>>>> >>>>> I know thta the VM portal add issue with displaying user VMs. It seem >>>>> to be fix with this bug >>>>> *https://bugzilla.redhat.com/show_bug.cgi?id=148087 >>>>> <https://bugzilla.redhat.com/show_bug.cgi?id=148087>* >>>>> >>>>> >>>> https://bugzilla.redhat.com/show_bug.cgi?id=1480877 (you missed a 7 >>>> :)) >>>> >>>> >>>>> But if i try the portal does not show anything, My engine is up to >>>>> date with 4.2 repo. It this still a issue? >>>>> >>>> >>>> Yes, that code is released and it should be working. Can you describe >>>> your permissions? Does your user have permissions to see the vm? >>>> >>>> >>>>> >>>>> Thanks >>>>> _______________________________________________ >>>>> Users mailing list -- users(a)ovirt.org >>>>> To unsubscribe send an email to users-leave(a)ovirt.org >>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>>>> oVirt Code of Conduct: >>>>> https://www.ovirt.org/community/about/community-guidelines/ >>>>> List Archives: >>>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/AMNEI773NCIYN… >>>>> >>>> >>>> >>>> -- >>>> >>>> GREG SHEREMETA >>>> >>>> SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX >>>> >>>> Red Hat NA >>>> >>>> <https://www.redhat.com/> >>>> >>>> gshereme(a)redhat.com IRC: gshereme >>>> <https://red.ht/sig> >>>> >>> >>> >> >> -- >> >> GREG SHEREMETA >> >> SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX >> >> Red Hat NA >> >> <https://www.redhat.com/> >> >> gshereme(a)redhat.com IRC: gshereme >> <https://red.ht/sig> >> > > -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX Red Hat NA <https://www.redhat.com/> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig>

1 0

Re: [ovirt-devel] storage domain deactivating
by Nir Soffer 26 Jul '18

26 Jul '18

On Thu, Jul 26, 2018 at 9:29 PM Hetz Ben Hamo <hetz(a)hetz.biz> wrote: > On Thu, Jul 26, 2018 at 9:22 PM, Nir Soffer <nsoffer(a)redhat.com> wrote: > >> On Thu, Jul 26, 2018 at 9:11 PM Hetz Ben Hamo <hetz(a)hetz.biz> wrote: >> >>> Hi, >>> >> >> Hi Hetz, >> >> First I want to thank you for your great oVirt videos: >> https://www.youtube.com/channel/UCWrtPbXo4iVxO45aRABIJjg >> Warning: Hebrew content :-) >> >> > You're welcome. Didn't know I was *that* famous at RH IL. Give my regards > to Shai Revivo, Dudi and Yuval Turgeman ;) > I found it via twitter: https://twitter.com/itamarheim/status/1019947786471698439 > > >> I hope you plan another video showing how to upload ISO image >> directly into a FC or iSCSI domain... >> > > iSCSI - I'll probably make one. FC - no hardware here at home ;) > > >> One of the weird thing that happens is that when the machine boots and it >>> starts the HE, it mounts the storage domains and everything works. However, >>> after few moments, 3 of my 4 storage domains (ISO, export, and another >>> storage domain, but not the hosted_engine storage domain) is being >>> automatically deactivted, with the following errors: >>> >>> VDSM command GetFileStatsVDS failed: Storage domain does not exist: >>> (u'f241db01-2282-4204-8fe0-e27e36b3a909',) >>> Refresh image list failed for domain(s): ISO (ISO file type). Please >>> check domain activity. >>> Storage Domain ISO (Data Center HetzLabs) was deactivated by system >>> because it's not visible by any of the hosts. >>> Storage Domain data-NAS3 (Data Center HetzLabs) was deactivated by >>> system because it's not visible by any of the hosts. >>> Storage Domain export (Data Center HetzLabs) was deactivated by system >>> because it's not visible by any of the hosts. >>> >>> However, when I see those message and I'm manually re-activating those >>> storage domains, all of them getting the status "UP" and there are no >>> errors and I can see disks, images, etc... >>> >> >> What happens if you wait 10 minutes? I guess the system will activate all >> the domains >> automatically. >> > > I didn't wait 10 minutes. Too impatient ;) > > >> >> >>> Should I open a bug in Bugzilla about this issue? >>> >> >> Yes, this sounds like incorrect behavior, even if the storage domains are >> activated >> automatically later. >> > > Under which product? ( > https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt) > https://bugzilla.redhat.com/enter_bug.cgi?product=ovirt-engine Component: BLL.Storage oVirt team: Storage Don't forget to include logs from both engine host and all nodes. engine: /var/log/ovirt-engine/engine.log hosts: /var/log/vdsm/vdsm.log /var/log/sanlock.log /var/log/messages Note: the best mailing list for this discussions is this one: https://lists.ovirt.org/archives/list/users%40ovirt.org/ Nir

1 0