December 2023 - Users - oVirt List Archives

Installing oVirt on RHEL vs CentOS Stream, Alma or Rocky Linux
by Richard W.M. Jones 06 Oct '25

06 Oct '25

I'm still struggling to get oVirt installed. It absolutely will not install on RHEL 8, the documentation here is flat out wrong: https://www.ovirt.org/documentation/installing_ovirt_as_a_standalone_manage… javapackages-tools is not a module that exists in RHEL 8. Apparently it's a CentOS PowerTools module. Since original CentOS no longer really exists either, does anyone have any opinions or experience with installing oVirt on any of: - CentOS Stream 8 - Alma Linux 8.5 - Rocky Linux Alma in particular looks like a straight replacement for old CentOS. Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com virt-top is 'top' for virtual machines. Tiny program with many powerful monitoring features, net stats, disk stats, logging, etc. http://people.redhat.com/~rjones/virt-top

8 10

Error when deploy Ovirt4.4 Hosted Engine
by staybox＠gmail.com 17 Feb '25

17 Feb '25

Hello, I get error, need help. [ ERROR ] fatal: [localhost]: FAILED! => {"msg": "The conditional check 'not ipv6_deployment|bool and route_rules_ipv4.stdout | from_json | selectattr('priority', 'equalto', 100) | selectattr('dst', 'equalto', virbr_cidr_ipv4 | ipaddr('address') ) | list | length == 0' failed. The error was: error while evaluating conditional (not ipv6_deployment|bool and route_rules_ipv4.stdout | from_json | selectattr('priority', 'equalto', 100) | selectattr('dst', 'equalto', virbr_cidr_ipv4 | ipaddr('address') ) | list | length == 0): 'dict object' has no attribute 'dst'\n\nThe error appears to be in '/usr/share/ansible/collections/ansible_collections/ovirt/ovirt/roles/hosted_engine_setup/tasks/bootstrap_local_vm/01_prepare_routing_rules.yml': line 81, column 5, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n changed_when: true\n - name: Add IPv4 inbound route rules\n ^ here\n"}

4 4

How to list all snapshots?
by jorgevisentini＠gmail.com 14 Feb '25

14 Feb '25

Hello everyone! First, I would like to thank everyone involved in this wonderful project. I leave here my sincere thanks! Does anyone know if it is possible to list all snapshots automatically? It can be by ansible, python, shell... any way that helps to list them all without having to enter Domain by Domain. Thank you all!

4 3

snapshot solution: Existing snapshots that were taken after this one will be erased.
by dhanaraj.ramesh＠yahoo.com 29 Jan '25

29 Jan '25

Hi Team, when I want to commit the older snapshots I'm getting warning stating " Existing snapshots that were taken after this one will be erased.". is there any way we can retain the latest snapshots as is in the chain? I knew cloning and template export options are there to secure that latest snapshot data but these are will consume additional space in storage and take time.

4 3

Restart oVirt-Engine
by Jeremey Wise 09 Jan '25

09 Jan '25

How ,without reboot of hosting system, do I restart the oVirt engine? # I tried below but do not seem to effect the virtual machine [root@thor iso]# systemctl restart ov ovirt-ha-agent.service ovirt-imageio.service ovn-controller.service ovs-delete-transient-ports.service ovirt-ha-broker.service ovirt-vmconsole-host-sshd.service ovsdb-server.service ovs-vswitchd.service [root@thor iso]# # You cannot restart the VM " HostedEngine " as it responses: Error while executing action: HostedEngine: - Cannot restart VM. This VM is not managed by the engine. Reason is I had to do some work on a node. Reboot it.. it is back up.. network is all fine.. Cockpit working fine... and gluster fine.. But oVirt-Engine refuses to accept the node is up. -- p <jeremey.wise(a)gmail.com>enguinpages

4 4

Unable to access ovirt Admin Screen from ovirt Host
by louisb＠ameritech.net 07 Dec '24

07 Dec '24

I've reinstalled ovirt 4.4 on my server remotely via cockpit terminal. I'm able to access the ovirt admin screen remotely from the laptop that I used for the install. However, using the same URL I'm unable to gain access to the admin screen. Following the instruction in the documentation I've modified the file: /etc/ovirt-engine/engine.conf.d/99-custom-sso-setup.conf, to reflect the DNS name and I enter in the IP address. But I'm still unable to access the screen from the server console. What else needs to change in order to gain access from the server console? Thanks

5 8

SPM and Task error ...
by Enrico 22 Nov '24

22 Nov '24

Hi all, my ovirt cluster has got 3 Hypervisors runnig Centos 7.5.1804 vdsm is 4.20.39.1-1.el7, ovirt engine is 4.2.4.5-1.el7, the storage systems are HP MSA P2000 and 2050 (fibre channel). I need to stop one of the hypervisors for maintenance but this system is the storage pool manager. For this reason I decided to manually activate SPM in one of the other nodes but this operation is not successful. In the ovirt engine (engine.log) the error is this: 2019-07-25 12:39:16,744+02 INFO [org.ovirt.engine.core.bll.storage.pool.ForceSelectSPMCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] Running command: ForceSelectSPMCommand internal: false. Entities affected : ID: 81c9bd3c-ae0a-467f-bf7f-63ab30cd8d9e Type: VDSAction group MANIPULATE_HOST with role type ADMIN 2019-07-25 12:39:16,745+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, SpmStopOnIrsVDSCommand( SpmStopOnIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false'}), log id: 37bf4639 2019-07-25 12:39:16,747+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, ResetIrsVDSCommand( ResetIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', vdsId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', ignoreStopFailed='false'}), log id: 2522686f 2019-07-25 12:39:16,749+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, SpmStopVDSCommand(HostName = infn-vm05.management, SpmStopVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7'}), log id: 1810fd8b 2019-07-25 12:39:16,758+02 *ERROR* [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] SpmStopVDSCommand::Not stopping SPM on vds 'infn-vm05.management', pool id '18d57688-6ed4-43b8-bd7c-0665b55950b7' as there are uncleared tasks 'Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e', status 'running'' 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, SpmStopVDSCommand, log id: 1810fd8b 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, ResetIrsVDSCommand, log id: 2522686f 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, SpmStopOnIrsVDSCommand, log id: 37bf4639 2019-07-25 12:39:16,760+02 *ERROR* [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] EVENT_ID: USER_FORCE_SELECTED_SPM_STOP_FAILED(4,096), Failed to force select infn-vm07.management as the SPM due to a failure to stop the current SPM. while in the hypervisor (SPM) vdsm.log: 2019-07-25 12:39:16,744+02 INFO [org.ovirt.engine.core.bll.storage.pool.ForceSelectSPMCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] Running command: ForceSelectSPMCommand internal: false. Entities affected : ID: 81c9bd3c-ae0a-467f-bf7f-63ab30cd8d9e Type: VDSAction group MANIPULATE_HOST with role type ADMIN 2019-07-25 12:39:16,745+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, SpmStopOnIrsVDSCommand( SpmStopOnIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false'}), log id: 37bf4639 2019-07-25 12:39:16,747+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, ResetIrsVDSCommand( ResetIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', vdsId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', ignoreStopFailed='false'}), log id: 2522686f 2019-07-25 12:39:16,749+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, SpmStopVDSCommand(HostName = infn-vm05.management, SpmStopVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7'}), log id: 1810fd8b 2019-07-25 12:39:16,758+02 *ERROR* [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] SpmStopVDSCommand::Not stopping SPM on vds 'infn-vm05.management', pool id '18d57688-6ed4-43b8-bd7c-0665b55950b7' as there are uncleared tasks 'Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e', status 'running'' 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, SpmStopVDSCommand, log id: 1810fd8b 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, ResetIrsVDSCommand, log id: 2522686f 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, SpmStopOnIrsVDSCommand, log id: 37bf4639 2019-07-25 12:39:16,760+02 *ERROR* [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] EVENT_ID: USER_FORCE_SELECTED_SPM_STOP_FAILED(4,096), Failed to force select infn-vm07.management as the SPM due to a failure to stop the current SPM. 2019-07-25 12:39:18,660+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period time and should be polled. Pre-polling period is 60000 millis. 2019-07-25 12:39:18,660+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period time and should be polled. Pre-polling period is 60000 millis. 2019-07-25 12:39:18,750+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period time and should be polled. Pre-polling period is 60000 millis. 2019-07-25 12:39:18,750+02 *ERROR* [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] BaseAsyncTask::logEndTaskFailure: Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' (Parent Command 'Unknown', Parameters Type 'org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters') ended with failure: 2019-07-25 12:39:18,750+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: Attempting to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' 2019-07-25 12:39:18,751+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, SPMClearTaskVDSCommand( SPMTaskGuidBaseVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 34ae2b2f 2019-07-25 12:39:18,752+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, HSMClearTaskVDSCommand(HostName = infn-vm05.management, HSMTaskGuidBaseVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: d3a78ad 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, HSMClearTaskVDSCommand, log id: d3a78ad 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, SPMClearTaskVDSCommand, log id: 34ae2b2f 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: At time of attempt to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' the response code was 'TaskStateError' and message was 'Operation is not allowed in this task state: ("can't clean in state running",)'. Task will not be cleaned 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] BaseAsyncTask::onTaskEndSuccess: Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' (Parent Command 'Unknown', Parameters Type 'org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters') ended successfully. 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: Attempting to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' 2019-07-25 12:39:18,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, SPMClearTaskVDSCommand( SPMTaskGuidBaseVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 42de0c2b 2019-07-25 12:39:18,759+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, HSMClearTaskVDSCommand(HostName = infn-vm05.management, HSMTaskGuidBaseVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 4895c79c 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, HSMClearTaskVDSCommand, log id: 4895c79c 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, SPMClearTaskVDSCommand, log id: 42de0c2b 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: At time of attempt to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' the response code was 'TaskStateError' and message was 'Operation is not allowed in this task state: ("can't clean in state running",)'. Task will not be cleaned 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period time and should be polled. Pre-polling period is 60000 millis. 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.bll.tasks.AsyncTaskManager] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Cleaning zombie tasks: Clearing async task 'Unknown' that started at 'Fri May 03 14:48:50 CEST 2019' 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: Attempting to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' 2019-07-25 12:39:18,765+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, SPMClearTaskVDSCommand( SPMTaskGuidBaseVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: da77af2 2019-07-25 12:39:18,766+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, HSMClearTaskVDSCommand(HostName = infn-vm05.management, HSMTaskGuidBaseVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 530694fb 2019-07-25 12:39:18,771+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, HSMClearTaskVDSCommand, log id: 530694fb 2019-07-25 12:39:18,771+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, SPMClearTaskVDSCommand, log id: da77af2 2019-07-25 12:39:18,771+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: At time of attempt to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' the response code was 'TaskStateError' and message was 'Operation is not allowed in this task state: ("can't clean in state running",)'. Task will not be cleaned there is some relation between this error and a task that has remained hanging, from SPM server: # vdsm-client Task getInfo taskID=fdcf4d1b-82fe-49a6-b233-323ebe568f8e { "verb": "prepareMerge", "id": "fdcf4d1b-82fe-49a6-b233-323ebe568f8e" } # vdsm-client Task getStatus taskID=fdcf4d1b-82fe-49a6-b233-323ebe568f8e { "message": "running job 1 of 1", "code": 0, "taskID": "fdcf4d1b-82fe-49a6-b233-323ebe568f8e", "taskResult": "", "taskState": "running" } How can I solve this problem ? Thanks a lot for your help !! Best Regards Enrico -- _______________________________________________________________________ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchetti<at>pg.infn.it _______________________________________________________________________

5 15

oVirt networks
by Enrico Becchetti 28 Aug '24

28 Aug '24

Dear all, Ineed your help to understand how to configure the network of a new oVirt cluster. Mynew system will have a 4.3 engine thatruns in a virtual machine, andsome Dell R7525 AMD EPYC hypervisors, eachholding two 4-port PCI network cards. These servers will have node-ovirt image again in version 4.3. As for the network, there are two HPE Aruba 2540G, non-stackable, with 24 1Gbs ports and 2 10Gbs uplinks to the star center. This is a simplified scheme: My goal is to make the most of the server's 8 ethernet interfaces to have both reliability and maximum possible throughput. This cluster will have two virtual networks, one forovirt management and one for the traffic of individual virtual machines. With that said here's what my idea is. I would like to have two links aggregated by 4Gbs, one for ovrtmgt and the other for vmnet. With the ovirt web interface I can createan active-passive "Mode 1" bond, but this won'tallow me to go beyond 1Gbs. Alternatively I could create a "Mode 4" bond 802.3ad but unfortunately the switches are not stacked and therefore not even this solution applies. This is an example with active passive configuration: Can you tell me if ovirt can generate//nested bonds? Or do you have other solutions ? Thanks a lot ! Best Regards Enrico -- _______________________________________________________________________ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Skype:enrico_becchetti Mail: Enrico.Becchetti<at>pg.infn.it Pagina web personale: https://www.pg.infn.it/home/enrico-becchetti/ ______________________________________________________________________

5 6

boot from cdrom & error code 0005
by edp＠maddalena.it 21 Aug '24

21 Aug '24

Hi. I have created a new storage domain (data domain, storage type nfs) to use it to upload iso images. I have so uploaded a new iso and then attach the iso to a new vm. But when I try to boot the vm I obtain this error: booting from dvd/cd... boot failed: could not read from cdrom (code 0005) no bootable device The iso file has been uploaded with success in the data storage domain and so the vm lets my attach the iso to the vm in the boot settings. Can you help me? Thank you

4 6

VM Migration Failed
by KSNull Zero 10 Jul '24

10 Jul '24

Running oVirt 4.4.5 VM cannot migrate between hosts. vdsm.log contains the following error: libvirt.libvirtError: operation failed: Failed to connect to remote libvirt URI qemu+tls://ovhost01.local/system: authentication failed: Failed to verify peer's certificate Certificates on hosts was renewed some time ago. How this issue can be fixed ? Thank you.

4 6

How to re-enroll (or renew) host certificates for a single-host hosted-engine deployment?
by Derek Atkins 28 Jun '24

28 Jun '24

Hi, I've got a single-host hosted-engine deployment that I originally installed with 4.0 and have upgraded over the years to 4.3.10. I and some of my users have upgraded remote-viewer and now I get an error when I try to view the console of my VMs: (remote-viewer:8252): Spice-WARNING **: 11:30:41.806: ../subprojects/spice-common/common/ssl_verify.c:477:openssl_verify: Error in server certificate verification: CA signature digest algorithm too weak (num=68:depth0:/O=<My Org Name>/CN=<Host's Name>) I am 99.99% sure this is because the old certs use SHA1. I reran engine-setup on the engine and it asked me if I wanted to renew the PKI, and I answered yes. This replaced many[1] of the certificates in /etc/pki/ovirt-engine/certs on the engine, but it did not update the Host's certificate. All the documentation I've seen says that to refresh this certificate I need to put the host into maintenance mode and then re-enroll.. However I cannot do that, because this is a single-host system so I cannot put the host in local mode -- there is no place to migrate the VMs (let alone the Engine VM). So.... Is there a command-line way to re-enroll manually and update the host certs? Or some other way to get all the leftover certs renewed? Thanks, -derek [1] Not only did it not update the Host's cert, it did not update any of the vmconsole-proxy certs, nor the certs in /etc/pki/ovirt-vmconsole/, and obviously nothing in /etc/pki/ on the host itself. -- Derek Atkins 617-623-3745 derek(a)ihtfp.com www.ihtfp.com Computer and Internet Security Consultant

8 16

4.5.4 with Ceph only storage
by Maurice Burrows 25 Jun '24

25 Jun '24

Hey ... A long story short ... I have an existing Red Hat Virt / Gluster hyperconverged solution that I am moving away from. I have an existing Ceph cluster that I primarily use for OpenStack and a small requirement for S3 via RGW. I'm planning to build a new oVirt 4.5.4 cluster on RHEL9 using Ceph for all storage requirements. I've read many online articles on oVirt and Ceph, and they all seem to use the Ceph iSCSI gateway, which is now in maintenance, so I'm not real keen to commit to iSCSI. So my question is, IS there any reason I cannot use CephFS for both hosted-engine and as a data storage domain? I'm currently running Ceph Pacific FWIW. Cheers

5 10

i can't access console with noVNC or VNC client(console.vv)
by z84614242＠163.com 14 May '24

14 May '24

i installed the ovirt 4.5 engine on centos stream 9 and add a ovirt node(ovirt node 4.5 iso) to this engine. i am going to run my vm on this node. i follow the instruction to create the data center, the cluster, the storage domain, upload the image. everything is fine. and after i create a vm with ubuntu image attach, i found that i can't visit the console. when i using the noVNC, it says "Something went wrong, connection is closed", when i visit vnc with virt-viewver, is says "Failed to complete handshake Error in the pull function". i try to change the console type to Bochs one and it appear the same. i change to QXL mode and the vm can't start any more. i check the log, it says "unsupported configuration: domain configuration does not support video model 'qxl'". so now i can't visit my vm by anyway. i deploy the engine follow the official instruction and keep mostly option default but why still have this issue. why the noVNC says "Something went wrong" instead of telling me what is actually wrong

2 1

Oracle Virtualization Manager 4.5 anyone?
by Thomas Hoberg 29 Apr '24

29 Apr '24

Redhat's decision to shut down RHV caught Oracle pretty unprepared, I'd guess, who had just shut down their own vSphere clone in favor of a RHV clone a couple of years ago. Oracle is even less vocal about their "Oracle Virtualization" strategy, they don't even seem to have a proper naming convention or branding. But they have been pushing out OV releases without a publicly announced EOL almost a year behind Redhat for the last years. And after a 4.4 release in September 22, a few days ago on December 12th actually a release 4.5 was made public. I've operated oVirt 4.3 with significant quality issues for some years and failed to make oVirt 4.4 work with any degree of acceptable stability but Oracle's variant of 4.4 proved to be rather better than 4.3 on CentOS7 with no noticable bugs, especially in the Hyperconverged setup that I am using with GlusterFS. I assumed that this was because Oracle based their 4.4 in fact on RHV 4.4 and not oVirt, but since they're not telling, who knows? One issue with 4.4 was that Oracle is pushing their UE-Kernel and that created immediate issues e.g. with VDO missing modules for UEK and other stuff, but that was solved easily enough by using the RHEL kernel. With 4.5 Oracle obviously can't use RHV 4.5 as a base, because there is no such thing with RHV declared EOL and according to Oracle their 4.5 is based on oVirt 4.5.4, which made the quality of that release somewhat questionable, but perhaps they have spent the year that has passed since productively killing bugs... only to be caught by surprise again, I presume, by an oVirt release 4.5.5 on December 1st, that no one saw coming! Long story slightly shorter, I've been testing Oracle's 4.5 variant a bit and it's not without issues. But much worse, Oracle's variant of oVirt seems to be entirely without any community that I could find. Now oVirt has been a somewhat secret society for years, but compared to what's going on with Oracle this forum is teaming with life! So did I just not look around enough? Is there a secret lair where all those OV users are hiding? Anyhow, here is what I've tested so far and where I'd love to have some feedback: 1. Setting up a three node HCI cluster from scratch using OL8.9 and OV 4.5 Since I don't have extra physical hardware for a 3 node HCI I'm using VMware workstation 17.5 on a Workstation running Windows 2022, a test platform that has been working for all kinds of virtualization tests from VMware ESXi, via Xcp-ng and ovirt. Created three VMs with OL8.9 minimal and then installed OV 4.5. I used the UEK default kernels and then had an issue when Ansible is trying to create the (local) management engine: the VM simply could not reach the Oracle repo servers to install the packages inside the ME. Since that VM is entirely under the control of Ansible and no console access of any type is possible in that installation phase, I couldn't do diagnostics. But with 4.4 I used to have similar issues and there switching back to the Redhat kernel for the ME (and the hosts) resolved them. But with 4.5 it seems that UEK has become a baked-in dependency: the OV team doesn't even seem to do any testing with the Redhat kernel any more. Or not with the HCI setup, which has become deprecated somewhere in oVirt 4.4... Or not with the Cockpit wizard, which might be in a totally untested state, or.... Doing the same install on OL 8.9 with OV 4.4, however, did work just fine and I was even able to update to 4.5 afterwards, which was a nice surprise... ...that I could not repeat on my physical test farm using three Atoms. There switching to the UEK kernel on the hosts caused issues, hosts were becoming unresponsive, file systems inaccessible, even if they were perfectly fine at the Gluster CLI level and in the end the ME VM simply would not longer start. Switching back to the Redhat kernel resolved things there. In short, switching between the Redhat kernel and UEK, which should be 100% transparent to all things userland including hypervisors, doesn't work. But my attempts to go with a clean install of 4.5 on a Redhat kernel or UEK is also facing issues. So far the only thing that has worked was a single node HCI install using UEK and OV 4.5 and upgrading to OV 4.5 on a virtualized triple node OV 4.4 HCI cluster. Anyone else out there trying these things? I was mostly determined to move to Proxmox VE, but Oracle's OV 4.5 seemed to be handing a bit of a life-line to oVirt and the base architecture is just much more powerful (or less manual) than Proxmox, which doesn't have a management engine.

8 12

Changing disk QoS causes segfault with IO-Threads enabled (oVirt 4.3.0.4-1.el7)
by jloh＠squiz.net 23 Apr '24

23 Apr '24

We recently upgraded to 4.3.0 and have found that when changing disk QoS settings on VMs whilst IO-Threads is enabled causes them to segfault and the VM to reboot. We've been able to replicate this across several VMs. VMs with IO-Threads disabled/turned off do not segfault when changing the QoS. Mar 1 11:49:06 srvXX kernel: IO iothread1[30468]: segfault at fffffffffffffff8 ip 0000557649f2bd24 sp 00007f80de832f60 error 5 in qemu-kvm[5576498dd000+a03000] Mar 1 11:49:06 srvXX abrt-hook-ccpp: invalid number 'iothread1' Mar 1 11:49:11 srvXX libvirtd: 2019-03-01 00:49:11.116+0000: 13365: error : qemuMonitorIORead:609 : Unable to read from monitor: Connection reset by peer Happy to supply some more logs to someone if they'll help but just wondering whether anyone else has experienced this or knows of a current fix other than turning io-threads off. Cheers.

4 3

Deploy oVirt Engine fail behind proxy
by Matteo Bonardi 21 Mar '24

21 Mar '24

Hi, I am trying to deploy the ovirt engine following self-hosted engine installation procedure on documentation. Deployment servers are behind a proxy and I have set it in environment and in yum.conf before run deploy. Deploy fails because ovirt engine vm cannot resolve AppStream repository url: [ INFO ] TASK [ovirt.engine-setup : Install oVirt Engine package] [ ERROR ] fatal: [localhost -> ovirt-manager.mydomain]: FAILED! => {"changed": false, "msg": "Failed to download metadata for repo 'AppStream': Cannot prepare internal mirrorlist: Curl error (6): Couldn't resolve host name for http://mirrorlist.centos.org/?release=8&arch=x86_64&repo=AppStream&infra=st… [Could not resolve host: mirrorlist.centos.org]", "rc": 1, "results": []} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up [ INFO ] Cleaning temporary resources [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fetch logs from the engine VM] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set destination directory path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Create destination directory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set local_vm_disk_path] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Give the vm time to flush dirty buffers] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Copy engine logs] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove local vm dir] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove temporary entry in /etc/hosts for the local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Clean local storage pools] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Destroy local storage-pool {{ he_local_vm_dir | basename }}] [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine local storage-pool {{ he_local_vm_dir | basename }}] [ INFO ] TASK [ovirt.hosted_engine_setup : Destroy local storage-pool {{ local_vm_disk_path.split('/')[5] }}] [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine local storage-pool {{ local_vm_disk_path.split('/')[5] }}] [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20201109165237.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20201109164244-b3e8sd.log How I can set proxy for the engine vm? Ovirt version: [root@myhost ~]# rpm -qa | grep ovirt-engine-appliance ovirt-engine-appliance-4.4-20200916125954.1.el8.x86_64 [root@myhost ~]# rpm -qa | grep ovirt-hosted-engine-setup ovirt-hosted-engine-setup-2.4.6-1.el8.noarch OS version: [root@myhost ~]# cat /etc/centos-release CentOS Linux release 8.2.2004 (Core) [root@myhost ~]# uname -a Linux myhost.mydomain 4.18.0-193.28.1.el8_2.x86_64 #1 SMP Thu Oct 22 00:20:22 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux Thanks for the help. Regards, Matteo

7 20

The oVirt Counter
by Sandro Bonazzola 21 Feb '24

21 Feb '24

Hi, for those who remember the Linux Counter project, if you'd like other to know you're using oVirt and know some details about your deployment, here's a way to count you in: https://ovirt.org/community/ovirt-counter.html Enjoy! -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D PERFORMANCE & SCALE Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 1

Upgrade from oVirt 4.5.4 to oVirt 4.5.5 - nothing provides selinux-policy >= 38.1.27-1.el9
by Devin A. Bougie 02 Feb '24

02 Feb '24

Hi, All. We're having trouble updating our 4.5.4 cluster to 4.5.5. We're running a self-hosted engine on fully updated AlmaLinux 9 hosts, and get the following errors when trying to upgrade to 4.5.5. Any suggestions would be greatly appreciated. Many thanks, Devin ------ [root@lnxvirt01 ~]# dnf clean all 157 files removed [root@lnxvirt01 ~]# dnf update CLASSE Packages - x86_64 36 MB/s | 569 kB 00:00 CentOS-9-stream - Ceph Pacific 839 kB/s | 557 kB 00:00 CentOS-9-stream - Gluster 10 240 kB/s | 56 kB 00:00 CentOS-9 - RabbitMQ 38 354 kB/s | 104 kB 00:00 CentOS Stream 9 - NFV OpenvSwitch 923 kB/s | 154 kB 00:00 CentOS-9 - OpenStack yoga 5.7 MB/s | 3.0 MB 00:00 CentOS Stream 9 - OpsTools - collectd 228 kB/s | 51 kB 00:00 CentOS Stream 9 - oVirt 4.5 6.2 MB/s | 1.0 MB 00:00 oVirt upstream for CentOS Stream 9 - oVirt 4.5 1.0 kB/s | 7.5 kB 00:07 AlmaLinux 9 - AppStream 87 MB/s | 7.7 MB 00:00 AlmaLinux 9 - BaseOS 72 MB/s | 2.4 MB 00:00 AlmaLinux 9 - BaseOS - Debug 9.9 MB/s | 1.9 MB 00:00 AlmaLinux 9 - CRB 67 MB/s | 2.3 MB 00:00 AlmaLinux 9 - Extras 1.5 MB/s | 17 kB 00:00 AlmaLinux 9 - HighAvailability 29 MB/s | 434 kB 00:00 AlmaLinux 9 - NFV 56 MB/s | 1.0 MB 00:00 AlmaLinux 9 - Plus 2.5 MB/s | 22 kB 00:00 AlmaLinux 9 - ResilientStorage 30 MB/s | 446 kB 00:00 AlmaLinux 9 - RT 53 MB/s | 1.0 MB 00:00 AlmaLinux 9 - SAP 874 kB/s | 9.7 kB 00:00 AlmaLinux 9 - SAPHANA 1.3 MB/s | 13 kB 00:00 Error: Problem 1: cannot install the best update candidate for package ovirt-vmconsole-1.0.9-1.el9.noarch - nothing provides selinux-policy >= 38.1.27-1.el9 needed by ovirt-vmconsole-1.0.9-3.el9.noarch from centos-ovirt45 - nothing provides selinux-policy-base >= 38.1.27-1.el9 needed by ovirt-vmconsole-1.0.9-3.el9.noarch from centos-ovirt45 Problem 2: package ovirt-vmconsole-host-1.0.9-3.el9.noarch from centos-ovirt45 requires ovirt-vmconsole = 1.0.9-3.el9, but none of the providers can be installed - cannot install the best update candidate for package ovirt-vmconsole-host-1.0.9-1.el9.noarch - nothing provides selinux-policy >= 38.1.27-1.el9 needed by ovirt-vmconsole-1.0.9-3.el9.noarch from centos-ovirt45 - nothing provides selinux-policy-base >= 38.1.27-1.el9 needed by ovirt-vmconsole-1.0.9-3.el9.noarch from centos-ovirt45 (try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) ------

3 3

Cannot restart ovirt after massive failure.
by Gilboa Davara 18 Jan '24

18 Jan '24

Hello all, During the night, one of my (smaller) setups, a single node self hosted engine (localhost NFS) crashed due to what-looks-like a massive disk failure (Software RAID6, with 10 drives + spare). After a reboot, I let the RAID resync with a fresh drive) and went on to start oVirt. However, no such luck. Two issues: 1. ovirt-ha-broker fails due to broken hosted engine state (log attached). 2. ovirt-ha-agent fails due to network test (tcp) even though both remote-host and DNS servers are active. (log attached). Two questions: 1. Can I somehow force the agent to disable the network liveliness test? 2. Can I somehow force the broker to rebuild / fix the hosted engine state? - Gilboa

4 17

Please, Please Help - New oVirt Install/Deployment Failing - "Host is not up..."
by Matthew J Black 18 Jan '24

18 Jan '24

Hi Everyone, Could someone please help me - I've been trying to do an install of oVirt for *weeks* (including false starts and self-inflicted wounds/errors) and it is still not working. My setup: - oVirt v4.5.3 - A brand new fresh vanilla install of RockyLinux 8.6 - all working AOK - 2*NICs in a bond (802.3ad) with a couple of sub-Interfaces/VLANs - all working AOK - All relevant IPv4 Address in DNS with Reverse Lookups - all working AOK - All relevant IPv4 Address in "/etc/hosts" file - all working AOK - IPv6 (using "method=auto" in the interface config file) enabled on the relevant sub-Interface/VLAN - I'm not using IPv6 on the network, only IPv4, but I'm trying to cover all the bases. - All relevant Ports (as per the oVirt documentation) set up on the firewall - ie firewall-cmd --add-service={{ libvirt-tls | ovirt-imageio | ovirt-vmconsole | vdsm }} - All the relevant Repositories installed (ie RockyLinux BaseOS, AppStream, & PowerTools, and the EPEL, plus the ones from the oVirt documentation) I have followed the oVirt documentation (including the special RHEL-instructions and RockyLinux-instructions) to the letter - no deviations, no special settings, exactly as they are written. All the dnf installs, etc, went off without a hitch, including the "dnf install centos-release-ovirt45", "dnf install ovirt-engine-appliance", and "dnf install ovirt-hosted-engine-setup" - no errors anywhere. Here is the results of a "dnf repolist": - appstream Rocky Linux 8 - AppStream - baseos Rocky Linux 8 - BaseOS - centos-ceph-pacific CentOS-8-stream - Ceph Pacific - centos-gluster10 CentOS-8-stream - Gluster 10 - centos-nfv-openvswitch CentOS-8 - NFV OpenvSwitch - centos-opstools CentOS-OpsTools - collectd - centos-ovirt45 CentOS Stream 8 - oVirt 4.5 - cs8-extras CentOS Stream 8 - Extras - cs8-extras-common CentOS Stream 8 - Extras common packages - epel Extra Packages for Enterprise Linux 8 - x86_64 - epel-modular Extra Packages for Enterprise Linux Modular 8 - x86_64 - ovirt-45-centos-stream-openstack-yoga CentOS Stream 8 - oVirt 4.5 - OpenStack Yoga Repository - ovirt-45-upstream oVirt upstream for CentOS Stream 8 - oVirt 4.5 - powertools Rocky Linux 8 - PowerTools So I kicked-off the oVirt deployment with: "hosted-engine --deploy --4 --ansible-extra-vars=he_offline_deployment=true". I used "--ansible-extra-vars=he_offline_deployment=true" because without that flag I was getting "DNF timout" issues (see my previous post `Local (Deployment) VM Can't Reach "centos-ceph-pacific" Repo`). I answer the defaults to all of questions the script asked, or entered the deployment-relevant answers where appropriate. In doing this I double-checked every answer before hitting <Enter>. Everything progressed smoothly until the deployment reached the "Wait for the host to be up" task... which then hung for more than 30 minutes before failing. From the ovirt-hosted-engine-setup... log file: - 2022-10-20 17:54:26,285+1100 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:113 fatal: [localhost]: FAILED! => {"changed": false, "msg": "Host is not up, please check logs, perhaps also on the engine machine"} I checked the following log files and found all of the relevant ERROR lines, then checked several 10s of proceeding and succeeding lines trying to determine what was going wrong, but I could not determine anything. - ovirt-hosted-engine-setup... - ovirt-hosted-engine-setup-ansible-bootstrap_local_vm... - ovirt-hosted-engine-setup-ansible-final_clean... - not really relevant, I believe I can include the log files (or the relevant parts of the log files) if people want - but that are very large: several 100 kilobytes each. I also googled "oVirt Host is not up" and found several entries, but after reading them all the most relevant seems to be a thread from these mailing list: `Install of RHV 4.4 failing - "Host is not up, please check logs, perhaps also on the engine machine"` - but this seems to be talking about an upgrade and I didn't gleam anything useful from it - I could, of course, be wrong about that. So my questions are: - Where else should I be looking (ie other log files, etc, and possible where to find them)? - Does anyone have any idea why this isn't working? - Does anyone have a work-around (including a completely manual process to get things working - I don't mind working in the CLI with virsh, etc)? - What am I doing wrong? Please, I'm really stumped with this, and I really do need help. Cheers Dulux-Oz

8 22

Configure OVN for oVirt failing - vdsm.tool.ovn_config.NetworkNotFoundError: hostname
by huw.m＠twinstream.com 13 Jan '24

13 Jan '24

Hello, When installing the self-hosted engine using rocky 9 as a host (using nightly builds), the install gets as far as running the below ansible task from ovirt-engine - name: Configure OVN for oVirt ansible.builtin.command: > vdsm-tool ovn-config {{ ovn_central }} {{ ovn_tunneling_interface }} {{ ovn_host_fqdn }} This command gets executed as vdsm-tool ovn-config 192.168.57.4 hostname.my.project.com and fails with error "stderr" : "Traceback (most recent call last):\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 117, in get_network\n return networks[net_name]\nKeyError: 'virt-1.local.hyp.twinstream.com'\n\nDuring handling of the above exception, another exception occurred:\n\nTraceback (most recent call last):\n File \"/usr/bin/vdsm-tool\", line 195, in main\n return tool_command[cmd][\"command\"](*args)\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 63, in ovn_config\n ip_address = get_ip_addr(get_network(network_caps(), net_name))\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 119, in get_network\n raise NetworkNotFoundError(net_name)\nvdsm.tool.ovn_config.NetworkNotFoundError: hostname.my.project.com" Running `vdsm-tool list-nets` on the host gives an empty list. `ip a` gives 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:6d:16:65 brd ff:ff:ff:ff:ff:ff altname enp0s6 altname ens6 inet 192.168.121.29/24 brd 192.168.121.255 scope global dynamic noprefixroute eth0 valid_lft 2482sec preferred_lft 2482sec inet6 fe80::5054:ff:fe6d:1665/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:6b:f4:7b brd ff:ff:ff:ff:ff:ff altname enp0s7 altname ens7 inet 192.168.56.151/24 brd 192.168.56.255 scope global noprefixroute eth1 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe6b:f47b/64 scope link valid_lft forever preferred_lft forever 4: eth2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bond0 state UP group default qlen 1000 link/ether 52:54:00:8f:40:45 brd ff:ff:ff:ff:ff:ff altname enp0s8 altname ens8 5: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:2f:27:9d brd ff:ff:ff:ff:ff:ff altname enp0s9 altname ens9 6: eth4: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bondstorage state UP group default qlen 1000 link/ether 52:54:00:b8:9b:d7 brd ff:ff:ff:ff:ff:ff altname enp0s10 altname ens10 7: eth5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:c2:9a:bd brd ff:ff:ff:ff:ff:ff altname enp0s11 altname ens11 8: eth6: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bondvm state UP group default qlen 1000 link/ether 52:54:00:ed:f7:cc brd ff:ff:ff:ff:ff:ff altname enp0s12 altname ens12 9: eth7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:de:8a:48 brd ff:ff:ff:ff:ff:ff altname enp0s13 altname ens13 10: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:8f:40:45 brd ff:ff:ff:ff:ff:ff inet 192.168.57.4/24 brd 192.168.57.255 scope global noprefixroute bond0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe8f:4045/64 scope link valid_lft forever preferred_lft forever 11: bondvm: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:ed:f7:cc brd ff:ff:ff:ff:ff:ff inet6 fe80::5054:ff:feed:f7cc/64 scope link valid_lft forever preferred_lft forever 12: bondstorage: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:b8:9b:d7 brd ff:ff:ff:ff:ff:ff inet 192.168.59.4/24 brd 192.168.59.255 scope global noprefixroute bondstorage valid_lft forever preferred_lft forever inet6 fe80::5054:ff:feb8:9bd7/64 scope link valid_lft forever preferred_lft forever 13: bondvm.20@bondvm: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:ed:f7:cc brd ff:ff:ff:ff:ff:ff inet6 fe80::5054:ff:feed:f7cc/64 scope link valid_lft forever preferred_lft forever 15: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:b2:5f:e2 brd ff:ff:ff:ff:ff:ff inet 192.168.222.1/24 brd 192.168.222.255 scope global virbr0 valid_lft forever preferred_lft forever 16: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master virbr0 state UNKNOWN group default qlen 1000 link/ether fe:16:3e:34:3d:ea brd ff:ff:ff:ff:ff:ff inet6 fe80::fc16:3eff:fe34:3dea/64 scope link valid_lft forever preferred_lft forever 47: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 6e:27:5f:fa:e3:3a brd ff:ff:ff:ff:ff:ff 48: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 12:7c:d9:2e:cf:26 brd ff:ff:ff:ff:ff:ff 49: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether a2:35:6e:5e:4c:60 brd ff:ff:ff:ff:ff:ff bond0 was selected as the ovirtmgmt bridge NIC. It currently only has one member interface eth2 using balance-xor. In the ovirt management console I can the see host in a down state and given the rest of the playbook ran which requires ssh connectivity between hosted-engine and host, I believe the network is generally setup correctly. No other immediate errors I can. As vdsm-tool ovn-config expects a network to exist with value of the hostname, what is meant to be creating this on the host? Thanks, Huw

2 3

how to renew expired ovirt node vdsm cert manually ?
by dhanaraj.ramesh＠yahoo.com 11 Jan '24

11 Jan '24

below are the steps to renew the expired vdsm cert of ovirt node # To check CERT expired # openssl x509 -in /etc/pki/vdsm/certs/vdsmcert.pem -noout -dates 1. Backup vdsm folder # cd /etc/pki # mv vdsm vdsm.orig # mkdir vdsm ; chown vdsm:kvm vdsm # cd vdsm # mkdir libvirt-vnc certs keys libvirt-spice libvirt-migrate # chown vdsm:kvm libvirt-vnc certs keys libvirt-spice libvirt-migrate 2. Regenerate cert & keys # vdsm-tool configure --module certificates 3. Copy the cert to destination location chmod 440 /etc/pki/vdsm/keys/vdsmkey.pem chown root /etc/pki/vdsmcerts/*pem chmod 644 /etc/pki/vdsmcerts/*pem cp /etc/pki/vdsm/certs/cacert.pem /etc/pki/vdsm/libvirt-spice/ca-cert.pem cp /etc/pki/vdsm/keys/vdsmkey.pem /etc/pki/vdsm/libvirt-spice/server-key.pem cp /etc/pki/vdsm/certs/vdsmcert.pem /etc/pki/vdsm/libvirt-spice/server-cert.pem cp /etc/pki/vdsm/certs/cacert.pem /etc/pki/vdsm/libvirt-vnc/ca-cert.pem cp /etc/pki/vdsm/keys/vdsmkey.pem /etc/pki/vdsm/libvirt-vnc/server-key.pem cp /etc/pki/vdsm/certs/vdsmcert.pem /etc/pki/vdsm/libvirt-vnc/server-cert.pem cp -p /etc/pki/vdsm/certs/cacert.pem /etc/pki/vdsm/libvirt-migrate/ca-cert.pem cp -p /etc/pki/vdsm/keys/vdsmkey.pem /etc/pki/vdsm/libvirt-migrate/server-key.pem cp -p /etc/pki/vdsm/certs/vdsmcert.pem /etc/pki/vdsm/libvirt-migrate/server-cert.pem chown root:qemu /etc/pki/vdsm/libvirt-migrate/server-key.pem cp -p /etc/pki/vdsm.orig/keys/libvirt_password /etc/pki/vdsm/keys/ mv /etc/pki/libvirt/clientcert.pem /etc/pki/libvirt/clientcert.pem.orig mv /etc/pki/libvirt/private/clientkey.pem /etc/pki/libvirt/private/clientkey.pem.orig mv /etc/pki/CA/cacert.pem /etc/pki/CA/cacert.pem.orig cp -p /etc/pki/vdsm/certs/vdsmcert.pem /etc/pki/libvirt/clientcert.pem cp -p /etc/pki/vdsm/keys/vdsmkey.pem /etc/pki/libvirt/private/clientkey.pem cp -p /etc/pki/vdsm/certs/cacert.pem /etc/pki/CA/cacert.pem 3. cross check the backup folder /etc/pki/vdsm.orig vs /etc/pki/vdsm # refer to /etc/pki/vdsm.orig/*/ and set the correct owner & group permission in /etc/pki/vdsm/*/ 4. restart services # Make sure both services are up systemctl restart vdsmd libvirtd

5 4

Unable to install oVirt on RHEL7.5
by SS00514758＠techmahindra.com 05 Jan '24

05 Jan '24

Hi All, I am unable to install oVirt on RHEL7.5, to install it I am taking reference of below link, https://www.ovirt.org/documentation/install-guide/chap-Installing_oVirt.html But though it is not working for me, couple of dependencies is not getting installed, and because of this I am not able to run the ovirt-engine, below are the depencies packages that unable to install, Error: Package: collectd-write_http-5.8.0-6.1.el7.x86_64 (@ovirt-4.2-centos-opstools) Requires: collectd(x86-64) = 5.8.0-6.1.el7 Removing: collectd-5.8.0-6.1.el7.x86_64 (@ovirt-4.2-centos-opstools) collectd(x86-64) = 5.8.0-6.1.el7 Updated By: collectd-5.8.1-1.el7.x86_64 (epel) collectd(x86-64) = 5.8.1-1.el7 Available: collectd-5.7.2-1.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.7.2-1.el7 Available: collectd-5.7.2-3.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.7.2-3.el7 Available: collectd-5.8.0-2.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.8.0-2.el7 Available: collectd-5.8.0-3.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.8.0-3.el7 Available: collectd-5.8.0-5.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.8.0-5.el7 Help me to install this. Looking forward to resolve this issue. Regards Sumit Sahay

6 8

Cannot get Ovirt 4.5 to work, how ever I try. Virgin install: no pki ca-cert gen, restoring: no OVN connection
by julian.steiner＠conesphere.com 04 Jan '24

04 Jan '24

1 3

On-Premise to MS Azure Cloud Migration
by techieim 29 Dec '23

29 Dec '23

Hello All User At Ovrit, We are using a Ovrit 4.5 Stable version set of 3 physical server as cluster in to 3 setup. As we have migrated from Ovirt 4.2 to 4.5 version, our hardware are already got out warranty and our management don’t to refresh the hardware. Where they have ask us to migrated running VM’s on our infra to “MS Azure Cloud Migration” As Microsoft say in they KB (https://learn.microsoft.com/en-us/azure/site-recovery/migrate-tutorial-on-p… methods where Ovirt/RHV is not listed. We have try one test vm from out Ovirt infra to MS Azure Cloud Migration. Which get show migrated but after that server don’t boot up we have mostly mix of Linux(CentOS/Ubuntu)/Windows. Is any one has migrated Ovirt host vm’s to MS Azure Cloud Migration Regards Techieim.

1 0

DR plan
by 2707974＠gmail.com 28 Dec '23

28 Dec '23

Hi All, We wish to create some kind of DR plan for our OVM 4.4.10.7-1.0.22.el8 environment. Idea is to do storage replication of defined Storage Domains. steps: create LUN on storage present LUN to OVM create Storage Domain put VMs on Storage Domain on storage replicate LUN to another storage [or the same storage] Storage Domains contains OVF_STORE Now, recovery On live OVM present replica of LUN import Storage Domain But we cannot import replica LUN. Where to look for errors? Is this action possible it all? Facts OVM is the same version Storage is the same vendor LUN is browsable on SAN level and have differen WWIN, if we wish to add replicated LUN like new Storage Domain. Adding new Storage Domain mean that LUN will be formatted ... What I do wrong?

2 3

DRoVirt
by 2707974＠gmail.com 28 Dec '23

28 Dec '23

I need/wish to do replication of VMs from one sie to another Does anyone have experience with this? Is there any other solution like DRoVirt https://github.com/Storware/drovirt

1 0

Re: How to restore VMs from shared storage domain when HE and VMs are not accessible?
by Jorge Visentini 27 Dec '23

27 Dec '23

I'm not sure, but... maybe: 1 - Import the Shared Domain Storage 2 - Export the data (VMs/Disks) to a mount point 3 - Create a Local Storage (the Cluster will changed) 4 - Import the data (VMs/Disks) to a Local Storage. Cheers! Em qua., 27 de dez. de 2023 às 14:51, Gorrepati, Varsha < Varsha.Gorrepati(a)hughes.com> escreveu: > Can we import domain storage when we created it locally? > > This option did not work for ovirt 4.4.10.7-1.el8 version. > > > > > > Thanks and Regards, > > Varsha Gorrepati > > > > > > > > *From:* Jorge Visentini <jorgevisentini(a)gmail.com> > *Sent:* Wednesday, December 27, 2023 10:13 AM > *To:* Gorrepati, Varsha <Varsha.Gorrepati(a)hughes.com> > *Cc:* users(a)ovirt.org > *Subject:* Re: [ovirt-users] How to restore VMs from shared storage > domain when HE and VMs are not accessible? > > > > Hi, First of all, recreate the engine VM using your backup or starting > from scratch. Then, just import the domain storages and your VMs will be > there. Cheers! Em qua. , 27 de dez. de 2023 às 06: 29, Gorrepati, Varsha > via Users <users@ ovirt. org> > > ZjQcmQRYFpfptBannerStart > > *This Message Is From an Untrusted Sender * > > You have not previously corresponded with this sender. > > ZjQcmQRYFpfptBannerEnd > > Hi, > > > > First of all, recreate the engine VM using your backup or starting from > scratch. > Then, just import the domain storages and your VMs will be there. > > > > Cheers! > > > > Em qua., 27 de dez. de 2023 às 06:29, Gorrepati, Varsha via Users < > users(a)ovirt.org> escreveu: > > How to restore VMs from shared storage domain when HE and VMs are not > accessible? > > > > > > Thanks and Regards, > > Varsha Gorrepati > > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > <https://urldefense.com/v3/__https:/www.ovirt.org/privacy-policy.html__;!!Em…> > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > <https://urldefense.com/v3/__https:/www.ovirt.org/community/about/community-…> > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/C27HOFRCFDACX… > <https://urldefense.com/v3/__https:/lists.ovirt.org/archives/list/users@ovir…> > > > > > -- > > Att, > > Jorge Visentini > +55 55 98432-9868 > -- Att, Jorge Visentini +55 55 98432-9868

1 0

[ovirt4.4][rockylinux8.9][tg3] Communication down between engine and host after setting up network
by Cyril VINH-TUNG 27 Dec '23

27 Dec '23

Dear all I have an issue with ~same environment~ to make tg3 nic communicate between rocky linux 8.9 oVirt 4.4 engine and rocky linux 8.9 fresh installed host. Thanks to this post (https://forums.centos.org/viewtopic.php?t=65299) I had to make the ifcfg simplications to make engine communicate with the host and therefore be able to install the host via ovirt web UI. Then after setting up the network via ovirt and reboot the host, I lost the communicatiin between ovirt engine and the host (even ping does not work). Note that I have a virtualized pfsense between engine and host. All firewalls are opened. From anywhere else than the engine subnet I can communicate with the host and the engine can also communicate with any device on the same subnet than the host... so my thought is that there might be some incompatible parameter between pfsense and the host.... but then 'why did it work before the vdsm installation ? :-/ ). This last fact makes me think that it's a vdsm/nmstate/ethtool parameter that I have to tune... Any help would be much appreciated... (host is a hp proliant DL360 with tg3 3.137 module coming from base rocky linux) [code] filename: /lib/modules/4.18.0-513.9.1.el8_9.x86_64/kernel/drivers/net/ethernet/broadcom/tg3.ko.xz firmware: tigon/tg3_tso5.bin firmware: tigon/tg3_tso.bin firmware: tigon/tg3.bin version: 3.137 license: GPL description: Broadcom Tigon3 ethernet driver author: David S. Miller (davem(a)redhat.com) and Jeff Garzik (jgarzik(a)pobox.com) rhelversion: 8.9 [/code]

1 1

[oVirt 4.4][RockyLinux 8.9] Engine loses connectivity with freshly installed hosts after network setup
by Cyril VINH-TUNG 27 Dec '23

27 Dec '23

Hello I have 2 freshly installed hosts with rockylinux 8.9 Then after setting up the network via ovirt and reboot, I lost the communication between ovirt engine and the host (even ping does not work). Note that I have a virtualized pfsense between engine and host. All firewalls are opened. From anywhere else than the engine subnet I can communicate with the host and the engine can also communicate with any device on the same subnet than the host... so my thought is that there might be some incompatible parameter between pfsense and the host.... but then 'why did it work before the vdsm installation ? :-/ ). This last fact makes me think that it's a vdsm/nmstate/ethtool parameter that I have to tune... Any help would be much appreciated...

1 1

Re: How to restore VMs from shared storage domain when HE and VMs are not accessible?
by Jorge Visentini 27 Dec '23

27 Dec '23

Hi, First of all, recreate the engine VM using your backup or starting from scratch. Then, just import the domain storages and your VMs will be there. Cheers! Em qua., 27 de dez. de 2023 às 06:29, Gorrepati, Varsha via Users < users(a)ovirt.org> escreveu: > How to restore VMs from shared storage domain when HE and VMs are not > accessible? > > > > > > Thanks and Regards, > > Varsha Gorrepati > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/C27HOFRCFDACX… > -- Att, Jorge Visentini +55 55 98432-9868

2 1

Creating snapshots of Windows VM result in Status Code: 500
by Jon Sattelberger 22 Dec '23

22 Dec '23

I receive a "Status Code: 500" popup whenever I attempt to create a snapshot for a Windows VM from the Administration Portal UI. It doesn't matter if the VM is powered on or off. Nor the OS designation set in the UI (setting Linux or Other...). The modal usually states: "Operation Canceled" followed by "Error while executing action: A Request to the Server failed with the following Status Code: 500" or "Error while executing query: null". There are at least a dozen popups, and will continue to repeat every few seconds. The snapshot tab in the Admin Portal UI will then have issues displaying the Active VM and the newly created snapshot entry. If you try to examine both entries, the disk, network, and installed applications might appear blank. The web inspector will usually contain the following: Fri Dec 22 09:43:07 GMT-500 2023 org.ovirt.engine.ui.frontend.Frontend SEVERE: Failed to execute runQuery: com.google.gwt.user.client.rpc.StatusCodeException: 500 Internal Server Error The call failed on the server; see server log for details com.google.gwt.user.client.rpc.StatusCodeException: 500 Internal Server Error The call failed on the server; see server log for details The engine logs will have: File: server.log 2023-12-22 09:43:04,387-05 ERROR [io.undertow.servlet] (default task-726) Exception while dispatching incoming RPC call: com.google.gwt.user.client.rpc.SerializationException: Can't find the serialization policy file. This probably means that the user has an old version of the application loaded in the browser. To solve the issue the user needs to close the browser and open it again, so that the application is reloaded. ... snip ... Caused by: com.google.gwt.user.client.rpc.SerializationException: Type 'org.ovirt.engine.core.common.utils.SecretValue' was not included in the set of types which can be serialized by this SerializationPolicy or its Class object could not be loaded. For security purposes, this type will not be serialized.: instance = *** The same snapshot will appear fine in the VM Portal. I am able to see the network interfaces, and disks. No issues creating a snapshot of a Linux-based VM from either UI interfaces. I've tried in both Firefox (115.5 ESR) and Google Chrome (latest-ish). Any thoughts on where to look next? Version 4.5.6-0 (git12af746179.el8) on RHEL 8. Thank you, Jon

1 0

Failed to validate GPG signature for ovirt-engine-appliance-4.5-20231201120201.1.el9.x86_64
by Jirka Simon 21 Dec '23

21 Dec '23

Hello ovirt people, please cloud you check ovirt-engine-appliance for centos stream 9? it returns ERROR ] fatal: [localhost]: FAILED! => {"attempts": 10, "changed": false, "msg": "Failed to validate GPG signature for ovirt-engine-appliance-4.5-20231201120201.1.el9.x86_64: Public key for ovirt-engine-appliance-4.5-20231201120201.1.el9.x86_64.rpm is not installed"} it is possible to install it manually with dnf -y install ovirt-engine-appliance --nogpgcheck jirka

1 0

Access Problem
by Vittorio 21 Dec '23

21 Dec '23

When i try to log in on Ovirt There is : "PKIX path validation failed: java.security.cert.CertPathValidatorException: validity check failed" Can you help me?

1 0

Proxy error when deploying self hosted engine
by dhiabimen＠gmail.com 21 Dec '23

21 Dec '23

Hello, I'm trying to deploy a self hosted engine in a KVM node oracle linux 8.8. But I have got the following error: 2023-12-21 10:40:43,687+0100 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:115 TASK [ovirt.ovirt.hosted_engine_setup : Install Oracle oVirt repo using specified url] 2023-12-21 10:40:43,889+0100 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:115 skipping: [localhost] 2023-12-21 10:40:44,091+0100 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:115 TASK [ovirt.ovirt.hosted_engine_setup : Install Oracle oVirt repo] 2023-12-21 10:41:28,976+0100 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 {'results': [], 'rc': 1, 'msg': "Failed to download metadata for repo 'ol8 _baseos_latest': Cannot download repomd.xml: Curl error (5): Couldn't resolve proxy name for https://yum.oracle.com/repo/OracleLinux/OL8/baseos/latest/x86_64/repodata/r… [Could not resolve proxy: www-proxy.us.oracle.com]", 'invocation': {'module_args': {'name': ['oracle-ovirt-release-45-el8'], 'state': 'present', 'allow_downgrade': False, 'autoremove': False, 'bugfix' : False, 'cacheonly': False, 'disable_gpg_check': False, 'disable_plugin': [], 'disablerepo': [], 'download_only': False, 'enable_plugin': [], 'enablerepo': [], 'exclude': [], 'installroot' : '/', 'install_repoquery': True, 'install_weak_deps': True, 'security': False, 'skip_broken': False, 'update_cache': False, 'update_only': False, 'validate_certs': True, 'sslverify': True, 'lock_timeout': 30, 'allowerasing': False, 'nobest': False, 'conf_file': None, 'disable_excludes': None, 'download_dir': None, 'list': None, 'releasever': None}}, '_ansible_no_log': None, 'attempts': 10, 'changed': False, '_ansible_delegated_vars': {'ansible_host': '192.168.222.75', 'ansible_port': None, 'ansible_user': 'root', 'ansible_connection': 'smart'}} 2023-12-21 10:41:29,078+0100 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:113 fatal: [localhost -> 192.168.222.75]: FAILED! => {"attempts": 10, "changed ": false, "msg"2023-12-21 10:40:43,687+0100 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:115 TASK [ovirt.ovirt.hosted_engine_setup : Install Oracle oVirt repo using spe cified url] 2023-12-21 10:40:43,889+0100 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:115 skipping: [localhost] 2023-12-21 10:40:44,091+0100 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:115 TASK [ovirt.ovirt.hosted_engine_setup : Install Oracle oVirt repo] 2023-12-21 10:41:28,976+0100 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 {'results': [], 'rc': 1, 'msg': "Failed to download metadata for repo 'ol8 _baseos_latest': Cannot download repomd.xml: Curl error (5): Couldn't resolve proxy name for https://yum.oracle.com/repo/OracleLinux/OL8/baseos/latest/x86_64/repodata/r… [Could not resolve proxy: www-proxy.us.oracle.com]", 'invocation': {'module_args': {'name': ['oracle-ovirt-release-45-el8'], 'state': 'present', 'allow_downgrade': False, 'autoremove': False, 'bugfix' : False, 'cacheonly': False, 'disable_gpg_check': False, 'disable_plugin': [], 'disablerepo': [], 'download_only': False, 'enable_plugin': [], 'enablerepo': [], 'exclude': [], 'installroot' : '/', 'install_repoquery': True, 'install_weak_deps': True, 'security': False, 'skip_broken': False, 'update_cache': False, 'update_only': False, 'validate_certs': True, 'sslverify': True, 'lock_timeout': 30, 'allowerasing': False, 'nobest': False, 'conf_file': None, 'disable_excludes': None, 'download_dir': None, 'list': None, 'releasever': None}}, '_ansible_no_log': None, 'attempts': 10, 'changed': False, '_ansible_delegated_vars': {'ansible_host': '192.168.222.75', 'ansible_port': None, 'ansible_user': 'root', 'ansible_connection': 'smart'}} 2023-12-21 10:41:29,078+0100 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:113 fatal: [localhost -> 192.168.222.75]: FAILED! => {"attempts": 10, "changed ": false, "msg": "Failed to download metadata for repo 'ol8_baseos_latest': Cannot download repomd.xml: Curl error (5): Couldn't resolve proxy name for https://yum.oracle.com/repo/OracleLin ux/OL8/baseos/latest/x86_64/repodata/repomd.xml [Could not resolve proxy: www-proxy.us.oracle.com]", "rc": 1, "results": []} : "Failed to download metadata for repo 'ol8_baseos_latest': Cannot download repomd.xml: Curl error (5): Couldn't resolve proxy name for https://yum.oracle.com/repo/OracleLin ux/OL8/baseos/latest/x86_64/repodata/repomd.xml [Could not resolve proxy: www-proxy.us.oracle.com]", "rc": 1, "results": []} I have found that " www-proxy.us.oracle.com" is declared in the "dnf.conf" file of the ovirt engine created VM. How can I deploy the self hosted engine without having this error . Please note that I did not use any proxy. Thanks,

1 0

How restore nodes ovirt UP from NonResponsive and VMs executing
by carlos.mendes＠mgo.cv 21 Dec '23

21 Dec '23

Hello, The node (ovirt2) however is having consistent problems. The follow sequence of events is reproducible and is causing the host to enter a "NonOperational" state on the cluster: * Host ovirt2 installed * VDSM ovirt2 command ConnectStorageServerVDS failed: Message timeout which can be caused by communication issues * Host ovirt2 is not responding. Host cannot be fenced automatically because power management for the host is disabled. * Host ovirt2 cannot access the Storage Domain(s) <UNKNOWN> attached to the Data Center DataCenter1. Setting Host state to Non-Operational. (5/27/1912:43:22 PM) * (Banner appears in GUI) Failed Activating Host ovirt2.witsconsult.com * Failed to connect Host ovirt2 to Storage Pool DataCenter1 (5/27/1912:47:07 PM) * Host ovirt2 cannot access the Storage Domain(s) <UNKNOWN> attached to the Data Center DataCenter1. Setting Host state to Non-Operational. (5/27/1912:47:07 PM) * Host ovirt2 is not responding. Host cannot be fenced automatically because power management for the host is disabled. (5/27/1912:47:07 PM) * VDSM ovirt2 command ConnectStorageServerVDS failed: Message timeout which can be caused by communication issues (5/27/1912:47:07 PM) I can then re-activate ovirt2, which appears as green for approximately 5 minutes and then repeats all of the above issues. What can I do to troubleshoot this?

3 2

iSCSI Storage Domain Issues - Please Help
by Matthew J Black 20 Dec '23

20 Dec '23

Hi Guys & Gals, So I've been researching this issue online for a couple of days now and I can't seem to find a solution - so I'm hoping you kind people here can help. We're running oVirt (on Rocky 8, at the moment) with a iSCSI back-end provided by Ceph (Quincy, for the record). Everything from the Ceph-end looks AOK. However, none of the oVirt Hosts (and therefore the VMs) can connect to the Ceph iSCSI RBD Images (oVirt Storage Domains), and only one or two of the Hosts can log into the Ceph iSCSI Target - the others throw a "Failed to setup iSCSI subsystem" error. All of the existing iSCSI Storage Domains are in Maintenance mode, and when I try to do *anything* to them the logs spit out a "Storage domain does not exist:" message. I also cannot create a new iSCSI Storage Domain for a new Ceph pool - again, oVirt simply won't/can't see it, even though it clearly visable in the iSCSI section of the Ceph Dashboard (and in gwcli on the Ceph Nodes). All of this started happening after I ran an update of oVirt - including an "engine setup" with a full engine-vacuum. Nothing has changed on the Ceph-end. So I'm looking for help on 2 issues, which or may not be related: 1) Is there a way to "force" oVirt Hosts to log into iSCSI targets? This will mean all of the oVirt Hosts will be connected to all of the Ceph iSCSI Gateways. 2) I'm thinking that *somehow* the existing "Storage Domains" registered in oVirt have become orphaned, so they need to be "cleaned up" - is there a cli way to do this (I don't mind digging into SQL as I'm an old SQL engineer/admin from way back). Thoughts on how to do this - and if it should be done at all? Or should I simple detach the Storage Domain images from the relevant VMs and destroy the Storage Domains, recreate them (once I can get the oVirt Hosts to log back into the Ceph iSCSI Gateways), and then reattach the relevant images to the relevant VMs? I mean, after all, the data is good and available on the Ceph SAN, so there is only a little risk (as far as I can see) - but there are a *hell* of a lot of VMs to do to do this :-) Anyway, any and all help, suggestions, gotchas, etc, etc, etc, are welcome. :-) Cheers Dulux-Oz

2 1

oVirt 4.6 OS versions
by d03＠bornfree.org 20 Dec '23

20 Dec '23

Has it yet been decided which OS and version will be used for the oVirt 4.6 Hosted Engine and for 4.6 oVirt Node?

10 15

Clone VM Unable to start, went to maintenance in ovirt 4.3
by Arup Jyoti Thakuria 20 Dec '23

20 Dec '23

Hi Team, Clone VM Unable to start, went to maintenance in ovirt 4.3. OS Rocky Linux 9.3 Could you please put some lights? regards Arup

1 0

I missing hosted-engine hosts and manage, Can I restore admin with new engine and import datadomains?
by dortiz＠sinergyhard.com 19 Dec '23

19 Dec '23

I have 3 nodes with hosted engine and the hosts missing with the manage engine, I have a backup but not work fine. It's posible restore the infraestructure import the datadomains?

1 0

Fresh install ovirt node 4.5.5
by nowak.pawel.mail＠gmail.com 19 Dec '23

19 Dec '23

Hi, I made new install ovirt node and i can't login to www panel using the root account (bad user or password). SSH login works correctly. What may be the problem?

2 4

Ovirt 4.4.10 - Host deployment failure due to repository timeout
by tflau＠polyu.edu.hk 19 Dec '23

19 Dec '23

Hi, I faced host deployment issue on Ovirt 4.4.10 in this morning. After log review, it seems the repository took longer time to resolve the key from "https://ftp.yz.yamagata-u.ac.jp/pub/" (Default: 30 seconds) Is there any way to use another repository for resolving the issue? OS Version: Rocky Linux 8.9 Ovirt Version: 4.4.10 Error Message from host deployment log: 2023-12-19 09:29:10 HKT - TASK [ovirt-host-deploy-vdsm : Install ovirt-hosted-engine-setup package] ****** 2023-12-19 09:31:13 HKT - An exception occurred during task execution. To see the full traceback, use -vvv. The error was: OSError: Curl error (28): Timeout was reached for https://ftp.yz.yamagata-u.ac.jp/pub/linux/fedora-projects/epel/R PM-GPG-KEY-EPEL-8 [Operation timed out after 30000 milliseconds with 0 out of 0 bytes received] fatal: [10.13.5.3]: FAILED! => {"changed": false, "module_stderr": "Traceback (most recent call last):\n File \"/usr/lib/python3.6/site-packages/dnf/util.py\", line 115, in _urlopen\n repo._repo.downloadUrl(url, fo.fileno())\n File \"/usr/lib64/python3.6/site-packages/libdnf/repo.py\", line 499, in downloadUrl\n return _repo.Repo_downloadUrl(self, url, fd)\nRuntimeError: Curl error (28): Timeout was reached for https://ftp.yz.yamagata-u.ac.jp/pub/linux/fedora-pr ojects/epel/RPM-GPG-KEY-EPEL-8 [Operation timed out after 30000 milliseconds with 0 out of 0 bytes received]\n\nDuring handling of the above exception, another exception occurred:\n\nTraceback (most recent call last):\n File \"<stdin>\" , line 102, in <module>\n File \"<stdin>\", line 94, in _ansiballz_main\n File \"<stdin>\", line 40, in invoke_module\n File \"/usr/lib64/python3.6/runpy.py\", line 205, in run_module\n return _run_module_code(code, init_globals, r un_name, mod_spec)\n File \"/usr/lib64/python3.6/runpy.py\", line 96, in _run_module_code\n mod_name, mod_spec, pkg_name, script_name)\n File \"/usr/lib64/python3.6/runpy.py\", line 85, in _run_code\n exec(code, run_globals)\n F ile \"/tmp/ansible_dnf_payload_nsszl6ze/ansible_dnf_payload.zip/ansible/modules/packaging/os/dnf.py\", line 1370, in <module>\n File \"/tmp/ansible_dnf_payload_nsszl6ze/ansible_dnf_payload.zip/ansible/modules/packaging/os/dnf.py\", line 1359, in main\n File \"/tmp/ansible_dnf_payload_nsszl6ze/ansible_dnf_payload.zip/ansible/modules/packaging/os/dnf.py\", line 1338, in run\n File \"/tmp/ansible_dnf_payload_nsszl6ze/ansible_dnf_payload.zip/ansible/modules/packaging/os/ dnf.py\", line 1242, in ensure\n File \"/usr/lib/python3.6/site-packages/dnf/base.py\", line 2494, in _get_key_for_package\n keys = dnf.crypto.retrieve(keyurl, repo)\n File \"/usr/lib/python3.6/site-packages/dnf/crypto.py\", line 18 5, in retrieve\n with dnf.util._urlopen(keyurl, repo=repo) as handle:\n File \"/usr/lib/python3.6/site-packages/dnf/util.py\", line 119, in _urlopen\n raise IOError(str(e))\nOSError: Curl error (28): Timeout was reached for https: //ftp.yz.yamagata-u.ac.jp/pub/linux/fedora-projects/epel/RPM-GPG-KEY-EPEL-8 [Operation timed out after 30000 milliseconds with 0 out of 0 bytes received]\n", "module_stdout": "", "msg": "MODULE FAILURE\nSee stdout/stderr for the exact er ror", "rc": 1} Time required based on Curl Result: (Over 60 seconds) yum.repos.d]# curl -vvv --trace-time --connect-timeout 120 https://ftp.yz.yamagata-u.ac.jp/pub/linux/fedora-projects/epel/RPM-GPG-KEY-… 11:15:13.842041 * Trying 133.24.248.18... 11:15:13.842143 * TCP_NODELAY set 11:15:13.906252 * Connected to ftp.yz.yamagata-u.ac.jp (133.24.248.18) port 443 (#0) 11:15:13.907121 * ALPN, offering h2 11:15:13.907139 * ALPN, offering http/1.1 11:15:13.911221 * successfully set certificate verify locations: 11:15:13.911246 * CAfile: /etc/pki/tls/certs/ca-bundle.crt CApath: none 11:15:13.911353 * TLSv1.3 (OUT), TLS handshake, Client hello (1): 11:16:20.151979 * TLSv1.3 (IN), TLS handshake, Server hello (2):

1 0

Can`t upgrade my oVirt Node 4.5.0.2 to latest version 4.5.5.x
by Ivan Pashchuk 18 Dec '23

18 Dec '23

Dear all, I already updated oVirt engine to Version 4.5.5-1.el8 and go to update oVirt node, Removed and re added yum repositories on node host do not help. Reboot host not help too. Check update on host from engine said 'no updates found'. Can anyone help? # rpm -qa ovirt* ovirt-hosted-engine-setup-2.6.3-1.el8.noarch ovirt-imageio-daemon-2.4.3-1.el8.x86_64 ovirt-imageio-common-2.4.3-1.el8.x86_64 ovirt-openvswitch-2.15-3.el8.noarch ovirt-openvswitch-ipsec-2.15-3.el8.noarch ovirt-openvswitch-ovn-common-2.15-3.el8.noarch ovirt-openvswitch-ovn-host-2.15-3.el8.noarch ovirt-provider-ovn-driver-1.2.36-1.el8.noarch ovirt-host-dependencies-4.5.0-3.el8.x86_64 ovirt-release-host-node-4.5.0.2-1.el8.x86_64 ovirt-vmconsole-1.0.9-1.el8.noarch ovirt-node-ng-nodectl-4.4.2-1.el8.noarch ovirt-openvswitch-ovn-2.15-3.el8.noarch ovirt-hosted-engine-ha-2.5.0-1.el8.noarch ovirt-host-4.5.0-3.el8.x86_64 ovirt-vmconsole-host-1.0.9-1.el8.noarch ovirt-python-openvswitch-2.15-3.el8.noarch ovirt-ansible-collection-2.0.3-1.el8.noarch ovirt-imageio-client-2.4.3-1.el8.x86_64 # cat /usr/lib/os.release.d/ovirt-release-host-node NAME="CentOS Stream" VERSION="8" ID="centos" ID_LIKE="rhel fedora" VERSION_ID="8.7.2205.0" VARIANT="oVirt Node 4.5.0.2" VARIANT_ID="ovirt-node" PRETTY_NAME="oVirt Node 4.5.0" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:centos:centos:8" HOME_URL="https://www.ovirt.org/" BUG_REPORT_URL="https://bugzilla.redhat.com/" PLATFORM_ID="platform:el8" # yum repolist repo id repo name centos-ovirt45 CentOS Stream 8 - oVirt 4.5 cs8-extras CentOS Stream 8 - Extras cs8-extras-common CentOS Stream 8 - Extras common packages onn-appstream oVirt Node Optional packages from CentOS Stream 8 - AppStream onn-baseos oVirt Node Optional packages from CentOS Stream 8 - BaseOS ovirt-45-centos-stream-openstack-yoga CentOS Stream 8 - oVirt 4.5 - OpenStack Yoga Repository ovirt-45-upstream oVirt upstream for CentOS Stream 8 - oVirt 4.5 powertools CentOS Stream 8 - PowerTools

1 0

Can we import local storage domain?
by Gorrepati, Varsha 15 Dec '23

15 Dec '23

Can we import local storage domain? Thanks and Regards, Varsha Gorrepati

1 0

How to restore VMs from shared storage domain when HE and VMs are not accessible?
by Gorrepati, Varsha 15 Dec '23

15 Dec '23

How to restore VMs from shared storage domain when HE and VMs are not accessible? Thanks and Regards, Varsha Gorrepati

1 0

help: Hosted-engine lost data and how to recover vm config to deploy new cluster
by Pandey, Shreyas 15 Dec '23

15 Dec '23

Hi ovirt team, There are couple of questions I am struggling to get answers for. We have ovirt cluster setup on two servers. 1) The cluster went down and upon troubleshooting we noticed the hosted engine is not able to restart. [root@j3sv7sr01ctr01 ~]# hosted-engine --vm-status The hosted engine configuration has not been retrieved from shared storage yet, please ensure that ovirt-ha-agent service is running. [root@j3sv7sr01ctr01 ~]# ovirt-ha-agent and ovirt-ha-broker both are failing because of storage related issue. The glusterfs volume which is being used by hosted-engine doesnt have the hosted engine related configuration. [root@j3sv7sr01ctr01 ~]# cd /rhev/data-center/mnt/glusterSD/ [root@j3sv7sr01ctr01 glusterSD]# ls 10.52.60.131:_j3sv7sr01datastore3 [root@j3sv7sr01ctr01 glusterSD]# cd 10.52.60.131\:_j3sv7sr01datastore3/ [root@j3sv7sr01ctr01 10.52.60.131:_j3sv7sr01datastore3]# [root@j3sv7sr01ctr01 10.52.60.131:_j3sv7sr01datastore3]# ls -al total 1 drwxr-xr-x 4 vdsm kvm 95 Dec 12 20:26 . drwxr-xr-x 3 vdsm kvm 47 Dec 13 19:16 .. [root@j3sv7sr01ctr01 10.52.60.131:_j3sv7sr01datastore3]# [root@j3sv7sr01ctr01 10.52.60.131:_j3sv7sr01datastore3]# Also we dont have the snapshots of the glusterfs and so it looks like we cant get the hosted-engine data now. Is there anyway to recover the cluster from this state? We still have the metadata of the vms as shown below - [root@j3sv7sr01stg01 01a2b8d8-e360-41cc-beea-4080d48f436a]# pwd /mnt/datastore1/vms/6f2c0622-fa3b-48f4-b412-9bd6f20892cb/images/01a2b8d8-e360-41cc-beea-4080d48f436a [root@j3sv7sr01stg01 01a2b8d8-e360-41cc-beea-4080d48f436a]# [root@j3sv7sr01stg01 01a2b8d8-e360-41cc-beea-4080d48f436a]# [root@j3sv7sr01stg01 01a2b8d8-e360-41cc-beea-4080d48f436a]# [root@j3sv7sr01stg01 01a2b8d8-e360-41cc-beea-4080d48f436a]# [root@j3sv7sr01stg01 01a2b8d8-e360-41cc-beea-4080d48f436a]# cd .. [root@j3sv7sr01stg01 images]# cd .. [root@j3sv7sr01stg01 6f2c0622-fa3b-48f4-b412-9bd6f20892cb]# ls dom_md images [root@j3sv7sr01stg01 6f2c0622-fa3b-48f4-b412-9bd6f20892cb]# [root@j3sv7sr01stg01 6f2c0622-fa3b-48f4-b412-9bd6f20892cb]# ls images/ 01a2b8d8-e360-41cc-beea-4080d48f436a 39edc9c3-0f6a-4dc4-b0c9-8279c0d2301f 6841ade8-515b-438e-a464-87ee269b22aa b76b6031-a2ba-482b-a367-620521be9b9b e61b82ae-dae5-4131-b5f1-68050247ac11 05fc7f51-f217-419f-8dcd-781f363c6ec3 3bcf4941-9352-489d-b1cd-e81f6bac08e5 688f08fb-ec0b-4d4a-ba5f-aeb1ebea3c37 b8b48d39-6891-46a2-866c-dcfbd78d02a8 e6b473f9-e18d-49bd-af60-269baa6801ad 085fbfd5-523f-483c-b65f-b50fcdec4883 3c2c19a8-2c01-4487-b8c8-bf0e700f3a52 6ac1b668-6e17-48f9-b334-e271bfcb7788 b8e4bf92-1b68-4452-a2f5-244543a64467 ec9e26ab-fdc4-434c-bbf3-2959f3c1776c 08e0efb2-82de-4727-8527-dcdd134a75ef 3ebd222a-7f5e-4e27-bcb3-8fcdd3a2cfca 6f4ffa95-9855-46d1-b38f-c6fb90e9c92e bc7d3fd2-83a5-4c64-a68e-b50750ea1bee ef1d7d7d-ca6a-43c1-9f7c-3e52e1153842 0cba2187-6d43-4aa4-af8d-1c917aece6bb 401c7293-4f7f-4c47-b6c8-ff0a6f94fb0e 7a44c0a0-f202-423f-b390-13907fcf333e bcc9bc93-e7e3-4f6c-ae4c-f1911cfbebaf efb1b965-5e04-4537-954f-b5a70b95275b 18d527e7-822c-4faf-91d4-0be5940d3663 455dbdc1-2990-4474-ab1f-17767770bcb1 7d89ceb1-13b6-4646-8e1e-70e10a970b5f c12542d9-f9a9-417e-942e-d2b06a44d8d4 efc1d529-5fad-406d-baa5-100d187f8033 18ff181a-f620-49d8-a18d-92fb7c21e2d1 470e1c0e-f8f1-4477-9059-3220c68bad48 846bc7f5-6380-46ce-b31d-470bf2d10054 c27aeb05-e44e-447f-9563-5a8398eb73fc efd940ae-511a-4068-8c6c-97aaafbddcf4 1a2384e4-b850-4dae-a191-bb165c2833d9 48b7f23b-9041-4bd7-a4d9-6894117636e2 8cdf9897-5777-487c-967c-f2505f22755c c4874372-08e0-4ff3-9c5d-0404bdc7d194 f212e13e-3871-4c4a-8d15-450507202518 1a38eb80-6e21-4848-8518-943ac5625caf 4f709682-9159-40fa-b4c2-3080b26b72c3 903f9c51-9788-4a7d-b336-52a6fe4cc3ac c7ac51e0-4575-4d79-9cd9-247752df45a7 f4110154-4926-4019-8412-d76021aeb841 1d753f80-6811-4671-a807-865b7a04e11f 52634d4a-88f7-48e8-99c1-18e574b3cd23 9df26dbf-0370-40d4-badd-c0ad88cf96be c88fa564-2284-46ba-9784-5b66eac420be f6f910a9-0812-4fb1-8b70-bed869dcf580 21a99266-1c78-4271-a2ba-c65ad10cf26a 55356333-996e-4f13-86b3-ed064ec58ff7 a2b6ae87-71f9-41f7-97e8-90bb16e60517 cb354e40-5b5a-494f-a22d-b0a37fec09b3 fa7d2900-812f-4f9d-8f05-09a9321880d2 2330dbe1-abeb-4a0b-a4bd-e7e5fae68be2 57b097ed-9896-4a2c-a7a7-8ff387388752 a4b980d8-ff6a-4e10-a8ee-d4cfc9a4765a cb94ec8c-b29f-41cd-8b74-77687a69e75b fc63ae3e-35fb-4360-9c83-2089ec5d81c5 280fe3d4-dd16-49c7-ae7f-db8f70143f07 5bc471ba-52c9-4bbd-a1da-d2375e42b6bb a8afa44f-cf4f-4cc4-9fbb-5ce1b6be4bd5 d26d5671-6f6c-4b9b-81bc-d5a7e28eab0e ff0447dc-e950-4419-800b-495af75a5c65 31e2b9a1-946e-400b-be62-3c78575b23bc 5bf990c6-8898-41a9-bcc8-61bc81c872f9 a9fa7d64-70b3-46ce-9682-a976d86380fb da0c9b8e-66de-4283-85b4-f639205dd76a 355d27a1-ecc7-4e5d-bfe5-16d0e83d7df6 5c02176c-7ac1-4067-8cef-2be322798519 b171c219-0bb7-4619-aa45-886583f1dc5f dafdfde9-aa69-46f6-9f6d-9bf4ca7d5c94 39061360-c4d7-4852-a946-dee6a279039b 61dc998c-3ad9-404f-8103-82e66612e31d b578ddb5-da3b-4e73-9630-5ae605b92ee0 e1eb62b4-54a9-47a8-b2b2-bf8e3612f74c 39c0f701-574c-4795-91a4-60bfac700bcc 67f13533-2377-401b-8584-b0c2d70bad7c b6500cfa-d578-437c-98bb-602cd843228d e2fe200c-efa8-470c-a5cb-7a2ed6b50afa [root@j3sv7sr01stg01 6f2c0622-fa3b-48f4-b412-9bd6f20892cb]# [root@j3sv7sr01stg01 6f2c0622-fa3b-48f4-b412-9bd6f20892cb]# ls images/01a2b8d8-e360-41cc-beea-4080d48f436a/ e45d87e2-6fdb-41ab-9f1f-ac113db71ba5 e45d87e2-6fdb-41ab-9f1f-ac113db71ba5.meta f7529d80-f20b-46a8-bac4-5827afe2a648.lease e45d87e2-6fdb-41ab-9f1f-ac113db71ba5.lease f7529d80-f20b-46a8-bac4-5827afe2a648 f7529d80-f20b-46a8-bac4-5827afe2a648.meta [root@j3sv7sr01stg01 6f2c0622-fa3b-48f4-b412-9bd6f20892cb]# [root@j3sv7sr01stg01 6f2c0622-fa3b-48f4-b412-9bd6f20892cb]# 2) If we think of redeploying new cluster , can we use exisinting datastore which has the metdata of the vms to have the vms in its pre-outage state? What other options do we have here? Any help would be really important for us. Thanks!

1 0

Failed to migrate VM to Host ovirt3.XXX.cz due to an Error: Fatal error during migration. Trying to migrate to another Host.
by Jirka Simon 14 Dec '23

14 Dec '23

Hello there, after today's update I have problem with live migration to this host. with message 2023-12-14 10:00:01,089+01 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-11) [67218183] VM '77f85710-45e7-43ca-b0f4-69f87766cc43'(ca1.access.prod.hq.sldev.cz) was unexpectedly detected as 'Down' on VDS '044b7175-ca36-49b2-b01b-0253f9af7e4f'(ovirt3.corp.sldev.cz) (expected on '858b8951-9b5a-4b8f-994e-4e11788c34d6') 2023-12-14 10:00:01,090+01 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DestroyVDSCommand] (ForkJoinPool-1-worker-11) [67218183] START, DestroyVDSCommand(HostName = ovirt3.corp.sldev.cz, DestroyVmV DSCommandParameters:{hostId='044b7175-ca36-49b2-b01b-0253f9af7e4f', vmId='77f85710-45e7-43ca-b0f4-69f87766cc43', secondsToWait='0', gracefully='false', reason='', ignoreNoVm='true'}), log id: 696e7f0e 2023-12-14 10:00:01,336+01 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DestroyVDSCommand] (ForkJoinPool-1-worker-11) [67218183] FINISH, DestroyVDSCommand, return: , log id: 696e7f0e 2023-12-14 10:00:01,337+01 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-11) [67218183] VM '77f85710-45e7-43ca-b0f4-69f87766cc43'(ca1.access.prod.hq.sldev.cz) was unexpectedly detected as 'Down' on VDS '044b7175-ca36-49b2-b01b-0253f9af7e4f'(ovirt3.corp.sldev.cz) (expected on '858b8951-9b5a-4b8f-994e-4e11788c34d6') 2023-12-14 10:00:01,337+01 ERROR [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-11) [67218183] Migration of VM 'ca1.access.prod.hq.sldev.cz' to host 'ovirt3.corp.sldev.c z' failed: VM destroyed during the startup. When I stop a VM and start it again it starts on affected without any problem, but migration doesn't work. thank you for any help. Jirka

3 6

Grafana - Origin Not Allowed
by Maton, Brett 14 Dec '23

14 Dec '23

oVirt 4.5.0.8-1.el8 I tried to connect to grafana via the monitoring portal link from the dash and all panels are failing to display any data with varying error messages, but all include 'Origin Not Allowed' I navigated to Data Sources and ran a test on the PostgreSQL connection (localhost) which threw the same Origin Not Allowed error message. Any suggestions?

6 8

virsh console support
by marek 13 Dec '23

13 Dec '23

hi, is it possible use virsh console on ovirt host? [root@server ~]# virsh -c qemu:///system?authfile=/etc/ovirt-hosted-engine/virsh_auth.conf console 21 --safe Connected to domain 'server-dev-1' Escape character is ^] (Ctrl + ]) error: internal error: character device ua-e4d8f97d-a7dd-4769-972c-27412212b955 is not using a PTY dumpxml 21 shows <console type='unix'> <source mode='bind' path='/var/run/ovirt-vmconsole-console/5a06d390-431c-48b5-9fb6-ebc34af73a88.sock'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> Marek

1 0

Move SHE to a LUN on another storage appliance
by Colin Coe 12 Dec '23

12 Dec '23

Hi all I'm decommissioning an old SAN that holds our DEV/TST RHV instance. I'm following https://access.redhat.com/solutions/6529691 (How to move the Hosted-Engine storage to a new storage domain) and I'm on step 9 (Make sure that the self-hosted engine is shut down). hosted-engine --vm-status is reporting: hosted-engine --vm-status | grep -E 'Engine status|Hostname' Engine status : {"vm": "up", "health": "good", "detail": "Up"} Hostname : rhvh01.example.com Engine status : {"vm": "down_unexpected", "health": "bad", "detail": "unknown", "reason": "vm not running on this host"} Hostname : rhvh02.example.com Even though the vm is definitely shut down. The instructions say call Red Hat but its nearly 6PM and we only have standard support for this environment. Any ideas on how to resolve this? I'm not sure if it's a big issue but I don't want to cause myself more problems later. Thanks

1 0