VmIconDaoTest compiling error
by shubham dubey
I have done some changes in ovirt-engine now while compiling I am getting
following error in file
VmIconDaoTest.
Tests run: 13, Failures: 1, Errors: 0, Skipped: 0, Time elapsed: 2.466 sec
<<< FAILURE!
testGetVmIconByDataUrlWithValidUrl(org.ovirt.engine.core.dao.VmIconDaoTest)
Time elapsed: 18 sec <<< FAILURE!
java.lang.AssertionError: expected:<1> but was:<0>
at org.junit.Assert.fail(Assert.java:88)
at org.junit.Assert.failNotEquals(Assert.java:834)
at org.junit.Assert.assertEquals(Assert.java:645)
at org.junit.Assert.assertEquals(Assert.java:631)
at
org.ovirt.engine.core.dao.VmIconDaoTest.testGetVmIconByDataUrlWithValidUrl(VmIconDaoTest.java:59)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:498)
at
org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:50)
at
org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)
at
org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:47)
at
org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:17)
at
org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:26)
at
org.springframework.test.context.junit4.statements.RunBeforeTestMethodCallbacks.evaluate(RunBeforeTestMethodCallbacks.java:75)
at
org.springframework.test.context.junit4.statements.RunAfterTestMethodCallbacks.evaluate(RunAfterTestMethodCallbacks.java:86)
at
org.springframework.test.context.junit4.statements.SpringRepeat.evaluate(SpringRepeat.java:84)
at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:325)
at
org.springframework.test.context.junit4.SpringJUnit4ClassRunner.runChild(SpringJUnit4ClassRunner.java:254)
at
org.springframework.test.context.junit4.SpringJUnit4ClassRunner.runChild(SpringJUnit4ClassRunner.java:89)
at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
at
org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:26)
at
org.springframework.test.context.junit4.statements.RunBeforeTestClassCallbacks.evaluate(RunBeforeTestClassCallbacks.java:61)
at
org.springframework.test.context.junit4.statements.RunAfterTestClassCallbacks.evaluate(RunAfterTestClassCallbacks.java:70)
at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
at
org.springframework.test.context.junit4.SpringJUnit4ClassRunner.run(SpringJUnit4ClassRunner.java:193)
at
org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:252)
at
org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:141)
at
org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:112)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:498)
at
org.apache.maven.surefire.util.ReflectionUtils.invokeMethodWithArray(ReflectionUtils.java:189)
at
org.apache.maven.surefire.booter.ProviderFactory$ProviderProxy.invoke(ProviderFactory.java:165)
at
org.apache.maven.surefire.booter.ProviderFactory.invokeProvider(ProviderFactory.java:85)
at
org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:115)
at
org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:75)
...
...
Failed tests:
testGetVmIconByDataUrlWithValidUrl(org.ovirt.engine.core.dao.VmIconDaoTest):
expected:<1> but was:<0>
I haven't even done any change in VmIconDaoTest file but this error is
there.
I even try to change the value result.get(0) to result.get(1) in
testGetVmIconByDataUrlWithValidUrl but that didn't work.
Thanks in advance.
Shubham
8 years, 1 month
Regarding dao tests
by shubham dubey
I have made some changes to engine code and the try to run dao test.
$PGPASSWORD=engine \
./packaging/dbscripts/schema.sh \
-c apply -u engine -d engine_dao_tests
This command run sucessfully.
but after compiling through make I am getting following error
ERROR] Failed to execute goal
org.apache.maven.plugins:maven-checkstyle-plugin:2.17:check (checkstyle) on
project common: You have 7 Checkstyle violations. -> [Help 1]
so can anyone tell me what that means?
Thanks,
Shubham
8 years, 1 month
[ OST Manual Job ] Updated default fallback repo
by Daniel Belenky
Hi all,
Please note that we've updated the default fallback repo in manual job
<http://jenkins.ovirt.org/job/ovirt-system-tests_manual/>.
The fallback repo defines the source from which the RPMs that are not part
of the patch being tested are being taken.
Until today, the default source was 'latest_tested' repo, which is now
replaced by 'latest_release'.
*Note* that 'latest_tested' repository shouldn't be used on regular basis,
as this repository is changing as the
experimental flow runs, so in order to avoid failures - please use the
stable 'latest_release' repo, which contains all the
rpm's that were released in the last official release of oVirt.
Thanks,
--
DANIEL BELENKY
Associate sw engineer
RHEV DEVOPS
Red Hat Israel <https://www.redhat.com/>
dbelenky(a)redhat.com IRC: #rhev-integ, #rhev-dev
<https://red.ht/sig>
8 years, 1 month
[Engine] Runtime log controll script
by Roy Golan
Ever wanted to raise level of the engine logs and wanted to to that fast
and runtime?
This is a small wrapper around wildfly mgmt interface, called *log-control*
to do the trick[1]
Example, debug the db interaction layer:
./log-control org.ovirt.engine.core.dal debug
It will first try blantly to add the log category and then will set the log
level according to what you set. It is simple and stupid.
More interesting logger categories:
business logic (commands, queries) - org.ovirt.engine.core.bll
hosts interaction - org.ovirt.engine.core.vdsbroker
various utilities - org.ovirt.engine.core.utils
aaa - org.ovirt.engine.exttool.aaa
General suggestion -
I think is is it time for *ovirt-engine-contrib* so mini-helpers like that
can exists and when they are solid can go into mainstream repo, if needed
in there.
[1] https://gist.github.com/rgolangh/1cb9f9b3b7f7f0a1d16b5a976d90bd55
Thanks,
Roy
8 years, 1 month
ovirt-provider-ovn - appliance inclusion / default enablement
by Sandro Bonazzola
Hi,
with https://gerrit.ovirt.org/76855 it's requested to increase the
appliance size by adding ovirt-provider-ovn and its dependencies.
This raise a few questions.
The support for ovirt-provider-ovn is enabled by default in engine-setup
and going to be installed by default in the appliance so we're pushing to
use it.
Why not requiring it at ovirt-engine spec file level?
Answer given in the commit message of above patch is:
We do not want to have a hard dependency in the
form of an rpm require.
OVN and openvswitch are relatively heavy and complex,
and are still experimental. We would not want to
force everybody to pull them onto any Engine host.
So why adding it to the appliance, which is the default for hosted engine
which is our recommeded way to deploy oVirt, and enable it by default?
How this differs from DWH? ovirt-engine requires ovirt-engine-setup which
requires ovirt-engine-dwh setup which requires ovirt-engine-dwh.
Why can't we just require ovirt-provider-ovn in ovirt-engine instead of
tweaking the appliance?
If we decide it's not mandatory, why not make the default to not enabling
it in engine-setup and avoid to add it to the appliance?
Being optional, adding it collides with Bug 1401931
<https://bugzilla.redhat.com/show_bug.cgi?id=1401931> - [RFE] reduce the
size of the appliance
Thanks,
--
SANDRO BONAZZOLA
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
Red Hat EMEA <https://www.redhat.com/>
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
8 years, 1 month
[ OST Failure Report ] [ oVirt master ] [ 14/05/2017 ] [ test-repo_ovirt_experimental_master ]
by Shlomo Ben David
Hi,
Test failed: [ test-repo_ovirt_experimental_master ]
Link to suspected patches: N/A
Link to Job:
http://jenkins.ovirt.org/job/test-repo_ovirt_experimental_master/6665/
Link to all logs:
http://jenkins.ovirt.org/job/test-repo_ovirt_experimental_master/6665/art...
Error snippet from the log:
<error>
2017-05-14 03:56:31,782-0400 ERROR (jsonrpc/3) [storage.TaskManager.Task]
(Task='661acb48-075b-494a-8fb4-64c04ed99bcb') Unexpected error (task:871)
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 878,
in _run
return fn(*args, **kargs)
File "/usr/lib/python2.7/site-packages/vdsm/logUtils.py", line 52, in
wrapper
res = f(*args, **kwargs)
File "/usr/share/vdsm/storage/hsm.py", line 2172, in getAllTasksInfo
allTasksInfo = self._pool.getAllTasksInfo()
File "/usr/lib/python2.7/site-packages/vdsm/storage/securable.py", line
77, in wrapper
raise SecureError("Secured object is not in safe state")
SecureError: Secured object is not in safe state
2017-05-14 03:56:31,785-0400 INFO (jsonrpc/3) [storage.TaskManager.Task]
(Task='661acb48-075b-494a-8fb4-64c04ed99bcb') aborting: Task is aborted:
u'Secured object is not in safe state' - code 100 (task:1176)
2017-05-14 03:56:31,786-0400 ERROR (jsonrpc/3) [storage.Dispatcher] Secured
object is not in safe state (dispatcher:81)
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/vdsm/storage/dispatcher.py", line
73, in wrapper
result = ctask.prepare(func, *args, **kwargs)
File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 106,
in wrapper
return m(self, *a, **kw)
File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 1184,
in prepare
raise self.error
SecureError: Secured object is not in safe state
2017-05-14 03:56:31,786-0400 INFO (jsonrpc/3) [jsonrpc.JsonRpcServer] RPC
call Host.getAllTasksInfo failed (error 654) in 0.00 seconds (__init__:577)
2017-05-14 03:56:31,796-0400 INFO (jsonrpc/5) [dispatcher] Run and
protect: getAllTasksStatuses(spUUID=None, options=None) (logUtils:51)
2017-05-14 03:56:31,797-0400 ERROR (jsonrpc/5) [storage.TaskManager.Task]
(Task='568f515e-365b-47e4-8b2f-24e15deb6ae9') Unexpected error (task:871)
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 878,
in _run
return fn(*args, **kargs)
File "/usr/lib/python2.7/site-packages/vdsm/logUtils.py", line 52, in
wrapper
res = f(*args, **kwargs)
File "/usr/share/vdsm/storage/hsm.py", line 2132, in getAllTasksStatuses
allTasksStatus = self._pool.getAllTasksStatuses()
File "/usr/lib/python2.7/site-packages/vdsm/storage/securable.py", line
77, in wrapper
raise SecureError("Secured object is not in safe state")
SecureError: Secured object is not in safe state
2017-05-14 03:56:31,797-0400 INFO (jsonrpc/5) [storage.TaskManager.Task]
(Task='568f515e-365b-47e4-8b2f-24e15deb6ae9') aborting: Task is aborted:
u'Secured object is not in safe state' - code 100 (task:1176)
2017-05-14 03:56:31,798-0400 ERROR (jsonrpc/5) [storage.Dispatcher] Secured
object is not in safe state (dispatcher:81)
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/vdsm/storage/dispatcher.py", line
73, in wrapper
result = ctask.prepare(func, *args, **kwargs)
File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 106,
in wrapper
return m(self, *a, **kw)
File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 1184,
in prepare
raise self.error
SecureError: Secured object is not in safe state
<error>
Best Regards,
Shlomi Ben-David | Software Engineer | Red Hat ISRAEL
RHCSA | RHCVA | RHCE
IRC: shlomibendavid (on #rhev-integ, #rhev-dev, #rhev-ci)
OPEN SOURCE - 1 4 011 && 011 4 1
8 years, 1 month
Feature: enhanced OVA support
by Arik Hadas
Hi everyone,
We would like to share our plan for extending the currently provided
support for OVA files with:
1. Support for uploading OVA.
2. Support for exporting a VM/template as OVA.
3. Support for importing OVA that was generated by oVirt (today, we only
support those that are VMware-compatible).
4. Support for downloading OVA.
This can be found on the feature page
<http://www.ovirt.org/develop/release-management/features/virt/enhance-imp...>
.
Your feedback and cooperation will be highly appreciated.
Thanks,
Arik
8 years, 1 month
[VDSM] Adding Pylint to 'check' target
by Fred Rolland
Hi,
We are introducing Pylint to be performed as part of the 'check' target.
Once that patch [1] will be merged, every execution of 'make check' will
include also a Pylint analysis.
Note that execution time will be longer by about 2 minutes.
However, you are can use 'jobs' flag to tell 'make' to execute recipes
simultaneously.
Be aware that the output of the jobs will be interleaved.
For example, running 'make' with two parallel jobs:
make --jobs=2 check
Regards,
Freddy
[1] https://gerrit.ovirt.org/#/c/76390/
8 years, 1 month
