[OST][HC] HE fails to deploy
by Sahina Bose
HE fails to deploy at waiting for host to be up in the local HE VM.
The setup logs does not indicate why it failed - atleast I couldn't find
anything
---------- Forwarded message ----------
From: <jenkins(a)jenkins.phx.ovirt.org>
Date: Mon, Apr 2, 2018 at 7:50 PM
Subject: [oVirt Jenkins] ovirt-system-tests_hc-basic-suite-master - Build #
276 - Still Failing!
To: infra(a)ovirt.org, sabose(a)redhat.com
Project: http://jenkins.ovirt.org/job/ovirt-system-tests_hc-basic-
suite-master/
Build: http://jenkins.ovirt.org/job/ovirt-system-tests_hc-basic-
suite-master/276/
Build Number: 276
Build Status: Still Failing
Triggered By: Started by timer
-------------------------------------
Changes Since Last Success:
-------------------------------------
Changes for Build #265
[Gal Ben Haim] Check if the prefix exists before printing its size
[Sandro Bonazzola] ovirt-engine: add jobs for 4.1.10 async
Changes for Build #266
[Gal Ben Haim] Check if the prefix exists before printing its size
Changes for Build #267
[Gal Ben Haim] Check if the prefix exists before printing its size
[Daniel Belenky] ppc repos: Use qemu EV release instead of test
[Daniel Belenky] global_setup: Add generic package remove function
[Daniel Belenky] Fix package verification in verify_packages
Changes for Build #268
[Gal Ben Haim] Check if the prefix exists before printing its size
Changes for Build #269
[Gal Ben Haim] Check if the prefix exists before printing its size
Changes for Build #270
[Gal Ben Haim] Check if the prefix exists before printing its size
Changes for Build #271
[Gal Ben Haim] Check if the prefix exists before printing its size
Changes for Build #272
[Gal Ben Haim] Check if the prefix exists before printing its size
Changes for Build #273
[Eitan Raviv] network: macpool: test disallowing dups while dups exist
[Daniel Belenky] docker cleanup:Fix edge case for unamed containers
[Daniel Belenky] nested_config: Count nesting level of options
[Daniel Belenky] Introduce conditional execution in STDCI DSL
[Daniel Belenky] Add OST STDCI V2 jobs
Changes for Build #274
[Gal Ben Haim] he-iscsi-master: Temporarily exclude in check-patch
Changes for Build #275
[Gal Ben Haim] he-iscsi-master: Temporarily exclude in check-patch
Changes for Build #276
[Barak Korren] Force STDCI V2 job to use physical host
[Daniel Belenky] Build container on changes to docker_cleanup
-----------------
Failed Tests:
-----------------
No tests ran.
6 years, 8 months
OST Failure - Weekly update [07/04/2018-13/04/2018]
by Dafna Ron
On Fri, Apr 13, 2018 at 3:49 PM, Dafna Ron <dron(a)redhat.com> wrote:
> Hello,
>
> I would like to update on this week's failures and OST current status.
>
> We had some issues from previous week. once is still sporadically failing
> but since there were a few patches merged and another one in the processes
> I decided we can close this sprint with no backlog.
>
> this week's failures were one regression, sporadic failures and one
> packaging issue.
>
> We are still seeing sporadic failures on migration tests but Gal has a fix
> which would probably be merged soon. https://gerrit.ovirt.org/#/c/90166/
> - master,4.2: Wait for migration to end
>
> we have found and reported a regression change:
> https://gerrit.ovirt.org/#/c/89581/ - Subnet name should be an optional
> field
> This was fixed quickly by: https://gerrit.ovirt.org/#/c/89980/ - Fix
> mistaken mapping for retrieving subnet name from row
>
> We moved to Ansible 2.5 but the packages were not updated in the repos.
> this was fixed by this change: https://gerrit.ovirt.org/#/c/90015/ - 4.2:
> Take ansible from epel
>
>
>
> *Below you can see the chart for this week's resolved issues but cause of
> failure:**Code* = regression of working components/functionalities
> *Infra* = infrastructure/OST Infrastructure/Lago related issues/Power
> outages
> *OST* *Tests *- package related issues, failed build artifacts
>
>
>
>
>
>
>
>
>
>
> *Below is a chart of resolved failures based on ovirt version:*
>
>
>
> *Below is a chart showing failures by suite type: *
>
>
> *Below you can see the issues opened this week vs the backlog issues from
> previous week: *
>
>
> Thanks,
> Dafna
>
>
>
>
>
>
>
>
6 years, 8 months
make check on master fails due to UnicodeDecodeError
by Shani Leviim
Hi there,
I'm trying to run make check, and I have ~13 tests on vdsm/tests which
failes due to the following:
File "/home/sleviim/git/vdsm/lib/vdsm/api/vdsmapi.py", line 212, in
__init__
loaded_schema = pickle.load(f)
File "/usr/lib64/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0x80 in position 0:
ordinal not in range(128)
(Those lines are common to all failures)
Here is an example:
======================================================================
ERROR: test_ok_response (vdsmapi_test.DataVerificationTests)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/sleviim/git/vdsm/tests/vdsmapi_test.py", line 96, in
test_ok_response
_schema.schema().verify_retval(
File "/home/sleviim/git/vdsm/tests/vdsmapi_test.py", line 67, in schema
self._schema = vdsmapi.Schema(paths, True)
File "/home/sleviim/git/vdsm/lib/vdsm/api/vdsmapi.py", line 212, in
__init__
loaded_schema = pickle.load(f)
File "/usr/lib64/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0x80 in position 0:
ordinal not in range(128)
I've also tried to git clean -dxf && ./autogen.sh --system but it didn't
help.
Can you please assist?
Thanks!
*Regards,*
*Shani Leviim*
6 years, 8 months
planned Jenkins restart
by Evgheni Dereveanchin
Hi everyone,
I'll be performing a planned Jenkins restart within the next hour.
No new jobs will be scheduled during this maintenance period.
I will inform you once it is over.
Regards,
Evgheni Dereveanchin
6 years, 8 months
[ OST Failure Report ] [ oVirt master ] [ 2018-04-08 ] [098_ovirt_provider_ovn.use_ovn_provider]
by Barak Korren
Test failed: 098_ovirt_provider_ovn.use_ovn_provider
Link to suspected patches:
https://gerrit.ovirt.org/#/c/89581/3
Link to Job:
https://gerrit.ovirt.org/#/c/89581/3
Link to all logs:
http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/6714/artifa...
Error snippet from log:
<error>
'name'
-------------------- >> begin captured logging << --------------------
lago.providers.libvirt.cpu: DEBUG: numa
: cpus_per_cell: 1, total_cells: 2
lago.providers.libvirt.cpu: DEBUG: numa:
<numa>
<cell cpus="0" id="0" memory="1023" unit="MiB"/>
<cell cpus="1" id="1" memory="1023" unit="MiB"/>
</numa>
lago.providers.libvirt.cpu: DEBUG: numa
: cpus_per_cell: 1, total_cells: 2
lago.providers.libvirt.cpu: DEBUG: numa:
<numa>
<cell cpus="0" id="0" memory="1023" unit="MiB"/>
<cell cpus="1" id="1" memory="1023" unit="MiB"/>
</numa>
lago.providers.libvirt.cpu: DEBUG: numa
: cpus_per_cell: 1, total_cells: 2
lago.providers.libvirt.cpu: DEBUG: numa:
<numa>
<cell cpus="0" id="0" memory="2048" unit="MiB"/>
<cell cpus="1" id="1" memory="2048" unit="MiB"/>
</numa>
requests.packages.urllib3.connectionpool: INFO: * Starting new
HTTPS connection (1): 192.168.201.4
py.warnings: WARNING: * Unverified HTTPS request is being made.
Adding certificate verification is strongly advised. See:
https://urllib3.readthedocs.org/en/latest/security.html
requests.packages.urllib3.connectionpool: DEBUG: "POST /v2.0/tokens/
HTTP/1.1" 200 None
requests.packages.urllib3.connectionpool: INFO: * Starting new
HTTPS connection (1): 192.168.201.4
requests.packages.urllib3.connectionpool: DEBUG: "GET /v2.0/networks/
HTTP/1.1" 200 None
requests.packages.urllib3.connectionpool: INFO: * Starting new
HTTPS connection (1): 192.168.201.4
requests.packages.urllib3.connectionpool: DEBUG: "GET /v2.0/ports/
HTTP/1.1" 200 None
requests.packages.urllib3.connectionpool: INFO: * Starting new
HTTPS connection (1): 192.168.201.4
requests.packages.urllib3.connectionpool: DEBUG: "GET /v2.0/subnets/
HTTP/1.1" 200 None
requests.packages.urllib3.connectionpool: INFO: * Starting new
HTTPS connection (1): 192.168.201.4
requests.packages.urllib3.connectionpool: DEBUG: "POST /v2.0/networks/
HTTP/1.1" 201 None
requests.packages.urllib3.connectionpool: INFO: * Starting new
HTTPS connection (1): 192.168.201.4
requests.packages.urllib3.connectionpool: DEBUG: "POST /v2.0/subnets/
HTTP/1.1" 201 None
requests.packages.urllib3.connectionpool: INFO: * Starting new
HTTPS connection (1): 192.168.201.4
requests.packages.urllib3.connectionpool: DEBUG: "POST /v2.0/ports/
HTTP/1.1" 201 None
requests.packages.urllib3.connectionpool: INFO: * Starting new
HTTPS connection (1): 192.168.201.4
requests.packages.urllib3.connectionpool: DEBUG: "GET /v2.0/networks/
HTTP/1.1" 200 None
requests.packages.urllib3.connectionpool: INFO: * Starting new
HTTPS connection (1): 192.168.201.4
requests.packages.urllib3.connectionpool: DEBUG: "GET /v2.0/ports/
HTTP/1.1" 200 None
requests.packages.urllib3.connectionpool: INFO: * Starting new
HTTPS connection (1): 192.168.201.4
requests.packages.urllib3.connectionpool: DEBUG: "GET /v2.0/subnets/
HTTP/1.1" 200 None
--------------------- >> end captured logging << ---------------------
</error>
Note: we're seeing similar issues on the same patches in both the
'master' and the 4.2 change queues.
--
Barak Korren
RHV DevOps team , RHCE, RHCi
Red Hat EMEA
redhat.com | TRIED. TESTED. TRUSTED. | redhat.com/trusted
6 years, 8 months
Re: [ovirt-devel] [virt-tools-list] Project for profiles and defaults for libvirt domains
by Martin Kletzander
--ieNMXl1Fr3cevapt
Content-Type: text/plain; charset=iso-8859-1; format=flowed
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
[ I fixed up ovirt-devel(a)redhat.com to be devel(a)ovirt.org since the
former is deprecated. I'm also not trimming down much of the reply so
that they can get the whole picture. Sorry for the confusion ]
On Tue, Mar 20, 2018 at 03:10:12PM +0000, Daniel P. Berrang=E9 wrote:
>On Tue, Mar 20, 2018 at 03:20:31PM +0100, Martin Kletzander wrote:
>> 1) Default devices/values
>>
>> Libvirt itself must default to whatever values there were before any
>> particular element was introduced due to the fact that it strives to
>> keep the guest ABI stable. That means, for example, that it can't just
>> add -vmcoreinfo option (for KASLR support) or magically add the pvpanic
>> device to all QEMU machines, even though it would be useful, as that
>> would change the guest ABI.
>>
>> For default values this is even more obvious. Let's say someone figures
>> out some "pretty good" default values for various HyperV enlightenment
>> feature tunables. Libvirt can't magically change them, but each one of
>> the projects building on top of it doesn't want to keep that list
>> updated and take care of setting them in every new XML. Some projects
>> don't even expose those to the end user as a knob, while others might.
>
>This gets very tricky, very fast.
>
>Lets say that you have an initial good set of hyperv config
>tunables. Now sometime passes and it is decided that there is a
>different, better set of config tunables. If the module that is
>providing this policy to apps like OpenStack just updates itself
>to provide this new policy, this can cause problems with the
>existing deployed applications in a number of ways.
>
>First the new config probably depends on specific versions of
>libvirt and QEMU, and you can't mandate to consuming apps which
>versions they must be using. So you need a matrix of libvirt +
>QEMU + config option settings.
>
>Even if you have the matching libvirt & QEMU versions, it is not
>safe to assume the application will want to use the new policy.
>An application may need live migration compatibility with older
>versions. Or it may need to retain guaranteed ABI compatibility
>with the way the VM was previously launched and be using transient
>guests, generating the XML fresh each time.
>
>The application will have knowledge about when it wants to use new
>vs old hyperv tunable policy, but exposing that to your policy module
>is very tricky because it is inherantly application specific logic
>largely determined by the way the application code is written.
>
The idea was for updating XML based on policy, which is something you
want for new machines. You should then keep the XML per domain and only
do changes to if requested by the user or when libvirt fills in new
values in a guest ABI compatible fashion.
>
>> One more thing could be automatically figuring out best values based on
>> libosinfo-provided data.
>>
>> 2) Policies
>>
>> Lot of the time there are parts of the domain definition that need to be
>> added, but nobody really cares about them. Sometimes it's enough to
>> have few templates, another time you might want to have a policy
>> per-scenario and want to combine them in various ways. For example with
>> the data provided by point 1).
>>
>> For example if you want PCI-Express, you need the q35 machine type, but
>> you don't really want to care about the machine type. Or you want to
>> use SPICE, but you don't want to care about adding QXL.
>>
>> What if some of these policies could be specified once (using some DSL
>> for example), and used by virtuned to merge them in a unified and
>> predictable way?
>>
>> 3) Abstracting the XML
>>
>> This is probably just usable for stateless apps, but it might happen
>> that some apps don't really want to care about the XML at all. They
>> just want an abstract view of the domain, possibly add/remove a device
>> and that's it. We could do that as well. I can't really tell how much
>> of a demand there is for it, though.
>
>It is safe to say that applications do not want to touch XML at all.
>Any non-trivial application has created an abstraction around XML,
>so that they have an API to express what they want, rather than
>manipulating of strings to format/parse XML.
>
Sure, this was just meant to be a question as to whether it's worth
pursuing or not. You make a good point on why it is not (at least for
existing apps).
However, since this was optional, the way this would look without the
XML abstraction is that both input and output would be valid domain
definitions, ultimately resulting in something similar to virt-xml with
the added benefit of applying a policy from a file/string either
supplied by the application itself. Whether that policy was taken from
a common repository of such knowledge is orthogonal to this idea. Since
you would work with the same data, the upgrade could be incremental as
you'd only let virtuned fill in values for new options and could slowly
move on to using it for some pre-existing ones. None of the previous
approaches did this, if I'm not mistaken. Of course it gets more
difficult when you need to expose all the bits libvirt does and keep
them in sync (as you write below).
[...]
>If there was something higher level that gets more interesting,
>but the hard bit is that you still need a way to get at all the
>low level bits becuase a higher level abstracted API will never
>cover every niche use case.
>
Oh, definitely not every, but I see two groups of projects that have a
lot in common between themselves and between the groups as well. On the
other hand just templating and defaults is something that's easy enough
to do that it's not worth outsourcing that into another one's codebase.
>> 4) Identifying devices properly
>>
>> In contrast to the previous point, stateful apps might have a problem
>> identifying devices after hotplug. For example, let's say you don't
>> care about the addresses and leave that up to libvirt. You hotplug a
>> device into the domain and dump the new XML of it. Depending on what
>> type of device it was, you might need to identify it based on different
>> values. It could be <target dev=3D''/> for disks, <mac address=3D''/> f=
or
>> interfaces etc. For some devices it might not even be possible and you
>> need to remember the addresses of all the previous devices and then
>> parse them just to identify that one device and then throw them away.
>>
>> With new enough libvirt you could use the user aliases for that, but
>> turns out it's not that easy to use them properly anyway. Also the
>> aliases won't help users identify that device inside the guest.
>
>NB, relating between host device config and guest visible device
>config is a massive problem space in its own right, and not very
>easy to address. In OpenStack we ended up defining a concept of
>"device tagging" via cloud-init metadata, where openstack allows
>users to set opaque string tags against devices their VM has.
>OpenStack that generates a metadata file that records various
>pieces of identifying hardware attributes (PCI address, MAC
>addr, disk serial, etc) alongside the user tag. This metadata
>file is exposed to the guest with the hope that there's enough
>info to allow the user to decide which device is to be used for
>which purpose
>
This is good point, but I was mostly thinking about identifying devices
=66rom the host POV between two different XMLs (pre- and post- some
XML-modifying action, like hotplug).
>https://specs.openstack.org/openstack/nova-specs/specs/mitaka/approved/vir=
t-device-role-tagging.html
>https://access.redhat.com/documentation/en-us/red_hat_openstack_platform/1=
0/html/networking_guide/use-tagging
>
>> <rant>
>> We really should've gone with new attribute for the user alias instead
>> of using an existing one, given how many problems that is causing.
>> </rant>
>>
>> 5) Generating the right XML snippet for device hot-(un)plug
>>
>> This is kind of related to some previous points.
>>
>> When hot-plugging a device and creating an XML snippet for it, you want
>> to keep the defaults from point 1) and policies from 2) in mind. Or
>> something related to the already existing domain which you can describe
>> systematically. And adding something for identification (see previous
>> point).
>>
>> Doing the hot-unplug is easy depending on how much information about
>> that device is saved by your application. The less you save about the
>> device (or show to the user in a GUI, if applicable) the harder it might
>> be to generate an XML that libvirt will accept. Again, some problems
>> with this should be fixed in libvirt, some of them are easy to
>> workaround. But having a common ground that takes care of this should
>> help some projects.
>>
>> Hot-unplug could be implemented just based on the alias. This is
>> something that would fit into libvirt as well.
>>
>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>>
>> To mention some pre-existing solutions:
>>
>> - I understand OpenStack has some really sensible and wisely chosen
>> and/or tested default values.
>
>In terms of default devices and OS specific choices, OpenStack's
>decisions have been largely inspired by previous work in oVirt
>and / or virt-manager. So there's obviously overlap in the
>conceptual area, but there's also plenty that is very specific
>to OpenStack - untangling the two extract the common bits from
>the app specific bits is hard.
>
It definitely is, but do you think it's so difficult it's worthless to
pursuit? I did a tiny PoC based on the code from virt-manager, which
was trivial mainly thanks to the XMLBuilder for the domain objects.
Maybe exposing an easy way to work with the XML would be enough for some
projects.
Little birdie from oVirt told me that they would like some of sort of
thing that does what you can achieve with virt-xml if we, for example,
made it work on pure XML definitions without connecting to libvirt.
>> - I know KubeVirt has VirtualMachinePresets. That is something closely
>> related to points 1) and 2). Also their abstraction of the XML might
>> be usable for point 3).
>>
>> - There was an effort on creating policy based configuration of libvirt
>> objects called libvirt-designer. This is closely related to points 2)
>> and 3). Unfortunately there was no much going on lately and part of
>> virt-manager repository has currently more features implemented with
>> the same ideas in mind, just not exported for public use.
>
>This is the same kind of problem we faced wrt libvirt-gconfig and
>libvirt-gobject usage from virt-manager - it has an extensive code
>base that already works, and rewriting it to use something new
>is alot of work for no short-term benefit. libvirt-gconfig/gobject
>were supposed to be the "easy" bits for virt-manager to adopt, as
>they don't really include much logic that would step on virt-manager's
>toes. libvirt-designer was going to be a very opinionated library
>and in retrospective that makes it even harder to consider adopting
>it for usage in virt-manager, as it'll have signficant liklihood
>of making functionally significant changes in behaviour.
>
The initial idea (which I forgot to mention) was that all the decisions
libvirt currently does (so that it keeps the guest ABI stable) would be
moved into data (let's say some DSL) and it could then be switched or
adjusted if that's not what the mgmt app wants (on a per-definition
basis, of course). I didn't feel very optimistic about the upstream
acceptance for that idea, so I figured that there could be something
that lives beside libvirt, helps with some policies if requested and
then the resulting XML could be fed into libvirt for determining the
rest.
>There's also the problem with use of native libraries that would
>impact many apps. We only got OpenStack to grudgingly allow the
By native you mean actual binary libraries or native to the OpenStack
code as in python module? Because what I had in mind for this project
was a python module with optional wrapper for REST API.
>use of libosinfo native library via GObject Introspection, by
>promising to do work to turn the osinfo database into an approved
>stable format which OpenStack could then consume directly, dropping
>the native API usage :-( Incidentally, the former was done (formal
>spec for the DB format), but the latter was not yet (direct DB usage
>by OpenStack)
>
>
>BTW, I don't like that I'm being so negative to your proposal :-(
>I used to hope that we would be able to build higher level APIs on
>top of libvirt to reduce the overlap between different applications
>reinventing the wheel. Even the simplest bits we tried like the
>gconfig/gobject API are barely used. libvirt-designer is basically
>a failure. Though admittedly it didn't have enough development resource
>applied to make it compelling, in retrospect adoption was always going
>to be a hard sell except in greenfield developments.
>
I'm glad for the knowledge you provided. So maybe instead of focusing
on de-duplication of existing codebases we could _at least_ aim at
future mgmt apps. OTOH improving documentation on how to properly build
higher level concepts on top of libvirt would benefit them as well.
>Libosinfo is probably the bit we've had most success with, and has
>most promise for the future, particularly now that we formally allow
>apps to read the osinfo database directly and bypass the API. It is
>quite easy to fit into existing application codebases which helps alot.
>Even there I'm still disappointed that we only have GNOME Boxes using
>the kickstart generator part of osinfo - oVirt and Oz both still have
>their own kickstart generator code for automating OS installs.
>
>In general though, I fear anything API based is going to be a really
>hard sell to get wide adoption for based on what we've seen before.
>
>I think the biggest bang-for-buck is identifying more areas where we
>can turn code into data. There's definitely scope for recording more
>types of information in the osinfo database. There might also be
>scope for defining entirely new databases to complement the osinfo
>data, if something looks out of scope for libosinfo.
>
>Regards,
>Daniel
>--=20
>|: https://berrange.com -o- https://www.flickr.com/photos/dberrang=
e :|
>|: https://libvirt.org -o- https://fstop138.berrange.co=
m :|
>|: https://entangle-photo.org -o- https://www.instagram.com/dberrang=
e :|
--ieNMXl1Fr3cevapt
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: Digital signature
-----BEGIN PGP SIGNATURE-----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=L9yQ
-----END PGP SIGNATURE-----
--ieNMXl1Fr3cevapt--
6 years, 8 months
[ OST Failure Report ] [ oVirt 4.2 (vdsm) ] [ 05-04-2018 ] [ 004_basic_sanity.hotplug_cpu ]
by Dafna Ron
Hi,
We had a failure on 004_basic_sanity.hotplug_cpu. looking at the logs, I do
not see an issue on the cpu hotplug but it seems that the host had an issue
with network config.
can you please have a look?
*Link and headline of suspected patches: Failed patch: *
*virt: storage: minimal changes to the drive XML -
https://gerrit.ovirt.org/#/c/89508/ <https://gerrit.ovirt.org/#/c/89508/> *
*Reported as failure cause: *
*virt: extract local adjustments to XML -
https://gerrit.ovirt.org/#/c/89506/ <https://gerrit.ovirt.org/#/c/89506/> *
*Link to
Job:http://jenkins.ovirt.org/job/ovirt-4.2_change-queue-tester/1565/
<http://jenkins.ovirt.org/job/ovirt-4.2_change-queue-tester/1565/>Link to
all
logs:http://jenkins.ovirt.org/job/ovirt-4.2_change-queue-tester/1565/arti...
<http://jenkins.ovirt.org/job/ovirt-4.2_change-queue-tester/1565/artifact/...>(Relevant)
error snippet from the log: <error>MainProcess|jsonrpc/2::DEBUG::2018-04-05
18:58:17,451::cmdutils::150::root::(exec_cmd) /sbin/ifdown eth2 (cwd
None)MainProcess|jsonrpc/2::DEBUG::2018-04-05
18:58:17,719::cmdutils::158::root::(exec_cmd) SUCCESS: <err> = ''; <rc> =
0MainProcess|jsonrpc/2::DEBUG::2018-04-05
18:58:17,720::cmdutils::150::root::(exec_cmd) /sbin/ifdown eth3 (cwd
None)MainProcess|jsonrpc/2::DEBUG::2018-04-05
18:58:17,982::cmdutils::158::root::(exec_cmd) SUCCESS: <err> = ''; <rc> =
0ifup/onc5bbb5eed6a84::DEBUG::2018-04-05
18:58:18,165::cmdutils::158::root::(exec_cmd) FAILED: <err> = 'Running
scope as unit
b32c8477-857f-476c-96c8-580daf0d4217.scope.\n/etc/sysconfig/network-scripts/ifup-eth:
line 304: 12145 Terminated /sbin/dhclient ${DHCLIENTARGS}
${DEVICE}\nDevice "onc5bbb5eed6a84" does not exist.\nCannot find device
"onc5bbb5eed6a84"\nDevice "onc5bbb5eed6a84" does not exist.\nDevice
"onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84" does not
exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84"
does not exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice
"onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84" does not
exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84"
does not exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice
"onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84" does not
exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84"
does not exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice
"onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84" does not
exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84"
does not exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice
"onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84" does not
exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84"
does not exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice
"onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84" does not
exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84"
does not exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice
"onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84" does not
exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84"
does not exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice
"onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84" does not
exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84"
does not exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice
"onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84" does not
exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84"
does not exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice
"onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84" does
not exist.\nDevice "onc5bbb5eed6a84" does not exist.\nDevice
"onc5bbb5eed6a84" does not exist.\nDevice "onc5bbb5eed6a84" does not
exist.\n'; <rc> = 1ifup/onc5bbb5eed6a84::ERROR::2018-04-05
18:58:18,165::concurrent::201::root::(run) FINISH thread
<Thread(ifup/onc5bbb5eed6a84, stopped daemon 139876090296064)>
failedTraceback (most recent call last): File
"/usr/lib/python2.7/site-packages/vdsm/common/concurrent.py", line 194, in
run ret = func(*args, **kwargs) File
"/usr/lib/python2.7/site-packages/vdsm/network/configurators/ifcfg.py",
line 942, in _exec_ifup _exec_ifup_by_name(iface.name
<http://iface.name>, cgroup) File
"/usr/lib/python2.7/site-packages/vdsm/network/configurators/ifcfg.py",
line 928, in _exec_ifup_by_name raise
ConfigNetworkError(ERR_FAILED_IFUP, out[-1] if out else
'')ConfigNetworkError: (29, '\n')MainProcess|jsonrpc/2::DEBUG::2018-04-05
18:58:20,075::cmdutils::150::root::(exec_cmd) /sbin/ip addr flush dev eth2
scope global (cwd None)MainProcess|jsonrpc/2::DEBUG::2018-04-05
18:58:20,081::cmdutils::158::root::(exec_cmd) SUCCESS: <err> = ''; <rc> =
0MainProcess|jsonrpc/2::DEBUG::2018-04-05
18:58:20,082::ifcfg::479::root::(_atomicBackup) Backed up
/etc/sysconfig/network-scripts/ifcfg-eth2MainProcess|jsonrpc/2::DEBUG::2018-04-05
18:58:20,084::ifcfg::512::root::(_persistentBackup) backing up ifcfg-eth2:
HWADDR="54:52:c0:a8:c9:02" BOOTPROTO="dhcp" ONBOOT="yes" TYPE="Ethernet"
NAME="eth2" </error>*
6 years, 8 months
OST Failure - Weekly update [30/03/2018-06/04/2018]
by Dafna Ron
Hello,
I would like to update on this week's failures and OST current status.
We had a few failures this week and some are still on-going issues.
We had two unrelated issues failing the test:
006_migrations.prepare_migration_attachments_ipv6
This failure was periodical and is causing failure for several changes.
This issue is still on-going and seems to be pointing to this change as the
root cause:
https://gerrit.ovirt.org/#/c/89812/1 - examples: export template to an
export domain
Issue is still under investigation.
On Thursday evening and Friday we seem to have had failures which indicate
issues with migration and ipv6 configuration,
The tests that failed were 006_migrations.migrate_vm and
004_basic_sanity.hotplug_cpu
cpu hotplug failure was reporting these changes:
Failed patch:
virt: storage: minimal changes to the drive XML -
https://gerrit.ovirt.org/#/c/89508/
Reported as failure cause:
virt: extract local adjustments to XML - https://gerrit.ovirt.org/#/c/89506/
and migration failure was reporting this patch:
*aaa: can't switch user when accessing the engine with an active kerberos
ticket - https://gerrit.ovirt.org/#/c/89872/
<https://gerrit.ovirt.org/#/c/89872/>*
*This three issues are still on-going and you can see the cases resolved vs
the backlog which is going forward to next week: *
*Infra/OST tests related issues: *
We also had a failure which seems to be related to the ost test and was
fixed in this patch:
https://gerrit.ovirt.org/#/c/89781/ - Prevent network to be imported by
auto_sync
Further discussion on this can be found in the google doc opened by
Dominik:
https://docs.google.com/document/d/1VeKfI7luw-HHTCCmfogLNiYLTtIG_3maENVQl...
*Below you can see the chart for this week's resolved issues but cause of
failure:*
*Code* = regression of working components/functionalities
*Infra* = infrastructure/OST Infrastructure/Lago related issues/Power
outages
*OST Tests* - package related issues, failed build artifacts
*Below is a chart of resolved failures based on ovirt version*
*Below is a chart showing failures by suite type: *
Thanks,
Dafna
6 years, 8 months
[ OST Failure Report ] [ oVirt Master (ovirt-engine) ] [ 06-04-2018 ] [ 006_migrations.migrate_vm ]
by Dafna Ron
hi,
006_migrations.migrate_vm failure points to the below patch. There seems to
be an issue to migrate vms but I am not sure its related to this patch.
can you please check?
*Link and headline of suspected patches: aaa: can't switch user when
accessing the engine with an active kerberos ticket -
https://gerrit.ovirt.org/#/c/89872/
<https://gerrit.ovirt.org/#/c/89872/>Link to Job:*
* http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/6704/
<http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/6704/>Link
to all logs:*
http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/6704/artifa...
<http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/6704/>
*(Relevant) error snippet from the log: <error>2018-04-06 04:07:56,517-0400
ERROR (qgapoller/2) [Executor] Unhandled exception in <Task discardable
<NetworkInterfacesCheck vm=aad106a1-9043-4661-bb9b-9894f66b506b at
0x7fc4681a2590> timeout=10, duration=0.00 at 0x7fc4541193d0>
(executor:317)Traceback (most recent call last): File
"/usr/lib/python2.7/site-packages/vdsm/executor.py", line 315, in
_execute_task task() File
"/usr/lib/python2.7/site-packages/vdsm/executor.py", line 391, in
__call__ self._callable() File
"/usr/lib/python2.7/site-packages/vdsm/virt/periodic.py", line 314, in
__call__ self._execute() File
"/usr/lib/python2.7/site-packages/vdsm/virt/qemuguestagent.py", line 388,
in _execute for ifname, ifparams in six.iteritems(interfaces): File
"/usr/lib/python2.7/site-packages/six.py", line 599, in iteritems return
d.iteritems(**kw)AttributeError: 'list' object has no attribute
'iteritems'*2018-04-06
04:23:10,165-0400 ERROR (migsrc/aad106a1) [virt.vm]
(vmId='aad106a1-9043-4661-bb9b-9894f66b506b') migration destination error:
Virtual machine already exists (migration:290)
*</error>*
6 years, 8 months
