- Devel - oVirt List Archives

[Engine-devel] Java Newbie: Renaming some functions to fix findbugs warnings
by Adam Litke 22 Nov '13

22 Nov '13

Hello, I am working on resolving some warnings produced by findbugs and am looking for some advice on how to properly resolve the problem. The Frontend class has several pairs of methods where a capitalized version is a deprecated static form and the camelCase version is the instance method. For example: @Deprecated public static void RunQuery(...) - and - public void runQuery(...) In both cases the parameters are the same so simply renaming RunQuery to runQuery will result in a conflict. Since I am new to Java and the ovirt-engine project I am looking for some advice on how to fix the function name without breaking the code or people's sense of aesthetics. Since this is a deprecated function, would it be terrible to rename it to 'runQueryStatic' or 'runQueryDeprecated'? Since the language provides syntactic annotations for 'static' and 'deprecated', both of these names feel dirty but I am not sure what would be better. Thanks for helping out a newbie! --Adam

2 2

[Engine-devel] Fwd: Custom properties per device + vNIC profile = not working (< 3.3)
by Martin Perina 21 Nov '13

21 Nov '13

Hi Mike, ----- Original Message ----- > From: "Mike Kolesnik" <mkolesni(a)redhat.com> > To: "engine-devel" <engine-devel(a)ovirt.org> > Cc: "Barak Azulay" <bazulay(a)redhat.com>, "Martin Perina" <mperina(a)redhat.com>, "Livnat Peer" <lpeer(a)redhat.com>, > "Itamar Heim" <iheim(a)redhat.com> > Sent: Monday, November 11, 2013 8:49:33 AM > Subject: Custom properties per device + vNIC profile = not working (< 3.3) > > Hi, > > I came across a situation where I wanted to define custom properties on a > vNIC profile sitting under a network in a 3.2 data center. > From what I saw the configuration value for custom properties > (CustomDeviceProperties) is split into 4, one per each version (3.0, 3.1, > 3.2, 3.3). > Since vNIC profile is located under the DC tree, it takes the DC version - > 3.2 in this specific case. Custom Device Properties were designed to be specified for each cluster version independently, it doesn't care about DC version. AFAIK cluster version defines what features are available ... > > I tried to set the config value for 3.2 but got: > $ engine-config -s > CustomDeviceProperties="{type=interface;prop={myProp=[a-zA-Z0-9-]+}}" > --cver=3.2 > Cannot set value {type=interface;prop={myProp=[a-zA-Z0-9-]+}} to key > CustomDeviceProperties. Device custom properties are not supported in > version 3.2 > > This is already not very good, since in a 3.2 DC there can be 3.3 clusters > with 3.3 hosts that do support custom device properties. Specify your properties for 3.3 version, since they will be used in 3.3 clusters ... > > I also tried to alter the config value in the DB directly, but the custom > properties code ignored it since custom properties are not supported in 3.2. > So, de facto, I have no reasonable way as a user to define custom device > properties to use for my vNIC profiles in DC < 3.3. There are two configuration properties for Custom Device Properties: 1) SupportCustomDeviceProperties - defines in what version properties are supported - cannot be altered by users of course 2) CustomDeviceProperties - holds properties specification for each version - can be defined using engine-config > > I opened the bug https://bugzilla.redhat.com/show_bug.cgi?id=1028757 for > this, however I also want to discuss the situation: I looked at the bug and the problem is, that management network profile is bound to DC and not the Cluster. And that's something we never thought of ... > > 1. As a user, I can't set custom properties for level < 3.3 which is not > good. Well, it's 3.3 feature, so it looks OK for me > Removing the blocking, and loading custom properties for all versions would > fix the bug and allow using custom device properties for older versions, the > reasonable place to block this would be running a VM (or plugging a device). > Basically this is the lesser issue.. > > 2. I just don't see the added value of splitting the definition of the > properties per level.. The idea behind the version splitting was: 1) We have a device with a feature that doesn't work correctly with version 3.3, but it's fixed in 3.4 2) By specifying custom property per version we cane disable this feature for 3.3 and enable for 3.4 > The custom properties are extensions which might or might not be available to > a certain VM, I don't see how having different sets of custom properties per > version (what version, DC version, cluster version?) would make any > difference - either the VM can utilize the extension given some state of the > system, or it can't, but the determining factor is not the version but > rather the availability of the extension. > For example, I can have a hook for vNIC altering some property installed on > host A and not host B, if the VM runs on host A it will get this capability > and on host B it won't, regardless the DC version the VM is in. > > This is not to say we shouldn't block custom properties on the engine-VDSM > API level since it's only available since 3.3, but this is handled by > another config value (SupportCustomDeviceProperties) which is not alterable > by the user. > So basically, I think splitting the value per version is over complication > and see no added value to the users, just more maintenance should they > choose to use this feature. > > Your thoughts please. AFAIK only network and storage team wanted to use device custom properties in 3.3 version, but I'm not sure what's current usage status. But IMHO it's too late for 3.3 to change specification ... Martin

4 9

[Engine-devel] Problem building 3.3.1 branch
by Bob Doolittle 21 Nov '13

21 Nov '13

Hi, I'm trying to build engine for the first time and running into a build error. I'm a seasoned Unix developer, but new to some aspects of Linux development like git and maven, so I could be doing something naive. I'm following the instructions here: http://www.ovirt.org/OVirt_Engine_Development_Environment I did a clone of the engine repository, and did "git checkout -b myengine origin/ovirt-engine-3.3.1" to create my own branch based on 3.3.1 (current - I realize it's not quite done). Then, when I did "make install-dev PREFIX=$HOME/ovirt-engine" it failed when building the "Engine Web Root", specifically in the FileServletTest. Relevant build log is here: http://pastebin.com/JRcyWvtr Can anyone suggest what I've done wrong, or whether there's a problem with the repository at the moment? I'd appreciate any guidance. Thanks, Bob

4 9

[Engine-devel] IMP: Regarding an issue while translating the error messages for gluster using ErrorTranslator class
by Shubhendu Tripathi 21 Nov '13

21 Nov '13

This is a multi-part message in MIME format. --------------020507040501040703080208 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi, In the case of Gluster, as there are no one to one mappings available for all the error messages from Gluster, we set the error in the VdcFault object as NULL. We also populate the actual error from the Gluster as error message in the fault object. /getReturnValue().getExecuteFailedMessages().add(error);// //getReturnValue().getFault().setMessage(error);// //getReturnValue().getFault().setError(null);/ Because of above settings and the below code snippet in /Frontend.java/ class the error message as is gets displayed on the error dialog - / //public String translateVdcFault(final VdcFault fault) {// // return getVdsmErrorsTranslator().TranslateErrorTextSingle(fault.getError() == null// // ? fault.getMessage() : fault.getError().toString());// //}// / Well and good till now !! But while translation of the error messages, all the occurrences of "." get replaced with "_". This causes an issue for the gluster errors. If the error message sent from gluster has "."s (say IP Address of a host or FQDN for a host), that also gets replaced with "_" and the error message does not look correct. Request your suggestion for handling such a case. *PS: *One thing I can think of is, introducing a flag called /isExternalError/ in /VdcFault/ class to identify if the source of the fault is external. From Gluster we would set the flag as /true/, and while replacement of "." with "_", if the flag is set it will not do the replacements. Regards, Shubhendu --------------020507040501040703080208 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hi, In the case of Gluster, as there are no one to one mappings available for all the error messages from Gluster, we set the error in the VdcFault object as NULL. We also populate the actual error from the Gluster as error message in the fault object. getReturnValue().getExecuteFailedMessages().add(error); getReturnValue().getFault().setMessage(error); getReturnValue().getFault().setError(null); Because of above settings and the below code snippet in Frontend.java class the error message as is gets displayed on the error dialog - public String translateVdcFault(final VdcFault fault) {         return getVdsmErrorsTranslator().TranslateErrorTextSingle(fault.getError() == null                 ? fault.getMessage() : fault.getError().toString()); } Well and good till now !! But while translation of the error messages, all the occurrences of "." get replaced with "_". This causes an issue for the gluster errors. If the error message sent from gluster has "."s (say IP Address of a host or FQDN for a host), that also gets replaced with "_" and the error message does not look correct. Request your suggestion for handling such a case. PS: One thing I can think of is, introducing a flag called isExternalError in VdcFault class to identify if the source of the fault is external. From Gluster we would set the flag as true, and while replacement of "." with "_", if the flag is set it will not do the replacements. Regards, Shubhendu </body> </html> --------------020507040501040703080208--

4 11

[Engine-devel] Things to be done to support Ubuntu hosts
by Zhou Zheng Sheng 20 Nov '13

20 Nov '13

Hi, Recently Ubuntu support is added to VDSM, and .deb binray packages can be downloaded from launchpad.net PPA [1]. Most of the key features such as storage management and VM lifecycle work on Ubuntu. The cross distribution network management patches are upstream as well. One big piece left is making ovirt-host-deploy support Ubuntu, so that we can manage Ubuntu hosts from Engine, thus close the gap on host side. In May 2013 I made some hacks to ovirt-host-deploy and otopi. I made it skipped parts not supported on Ubuntu and configure the environment manually, and successfully added Ubuntu host to Engine [2]. Unfortunately I have no plans to continue on it, but I'd like to make a summary of the things I hacked to help anyone who wants to submit patches in future. I was to add a WIKI page but I found there were not many items, so a mail would be enough. 1. Package management operations Both otopi and ovirt-host-deploy query for dependency packages and install them on demand. The otopi package management just supports yum, we need to add apt-get support. Package names are different in Ubuntu, so I made a list mapping the names. The list in in VDSM source directory, debian/dependencyMap.txt . 2. Network configuration operations ovirt-host-deploy asks VDSM's configNetwork.py to create bridge network. Cross distribution support patches for configNetwork.py are under review. ovirt-host-deploy supports Ubuntu bridge configuration as long as they are merged. [1] https://launchpad.net/~zhshzhou/+archive/vdsm-ubuntu [2] http://www.ovirt.org/images/5/57/Shanghai-VDSM-on-Ubuntu.pdf Here goes the detailed hack patch. The hack was base on v1.0.1, I rebased it to the latest master. The rebased patch are not tested. If you find this email useless, it's actually a good news, which means there is not a lot of work and problems ahead ;-) Hack patch for ovirt-host-deploy. >From 120493a242046d19794ef3da83b32486d372aa39 Mon Sep 17 00:00:00 2001 From: Zhou Zheng Sheng <zhshzhou(a)linux.vnet.ibm.com> Date: Wed, 13 Nov 2013 18:02:26 +0800 Subject: [PATCH] Ubuntu Hacks Change-Id: Ifb4ebc829101c92d06475619b1b5986e87b83d57 Signed-off-by: Zhou Zheng Sheng <zhshzhou(a)linux.vnet.ibm.com> --- src/plugins/ovirt-host-deploy/gluster/packages.py | 17 +++++---- src/plugins/ovirt-host-deploy/tune/tuned.py | 3 +- src/plugins/ovirt-host-deploy/vdsm/bridge.py | 45 ++++++++++++----------- src/plugins/ovirt-host-deploy/vdsm/packages.py | 9 +++-- src/plugins/ovirt-host-deploy/vdsm/pki.py | 3 +- src/plugins/ovirt-host-deploy/vdsm/software.py | 2 + src/plugins/ovirt-host-deploy/vdsm/vdsmid.py | 3 +- 7 files changed, 45 insertions(+), 37 deletions(-) diff --git a/src/plugins/ovirt-host-deploy/gluster/packages.py b/src/plugins/ovirt-host-deploy/gluster/packages.py index 1fecfda..eb37744 100644 --- a/src/plugins/ovirt-host-deploy/gluster/packages.py +++ b/src/plugins/ovirt-host-deploy/gluster/packages.py @@ -60,13 +60,13 @@ class Plugin(plugin.PluginBase): ), ) def _validation(self): - if not self.packager.queryPackages(patterns=('vdsm-gluster',)): - raise RuntimeError( - _( - 'Cannot locate gluster packages, ' - 'possible cause is incorrect channels' - ) - ) + # if not self.packager.queryPackages(patterns=('vdsm-gluster',)): + # raise RuntimeError( + # _( + # 'Cannot locate gluster packages, ' + # 'possible cause is incorrect channels' + # ) + # ) self._enabled = True @plugin.event( @@ -74,7 +74,8 @@ class Plugin(plugin.PluginBase): condition=lambda self: self._enabled, ) def _packages(self): - self.packager.installUpdate(('vdsm-gluster',)) + # self.packager.installUpdate(('vdsm-gluster',)) + pass @plugin.event( stage=plugin.Stages.STAGE_CLOSEUP, diff --git a/src/plugins/ovirt-host-deploy/tune/tuned.py b/src/plugins/ovirt-host-deploy/tune/tuned.py index d8e00c5..d0dcea5 100644 --- a/src/plugins/ovirt-host-deploy/tune/tuned.py +++ b/src/plugins/ovirt-host-deploy/tune/tuned.py @@ -70,7 +70,8 @@ class Plugin(plugin.PluginBase): condition=lambda self: self._enabled, ) def _packages(self): - self.packager.installUpdate(('tuned',)) + # self.packager.installUpdate(('tuned',)) + pass @plugin.event( stage=plugin.Stages.STAGE_MISC, diff --git a/src/plugins/ovirt-host-deploy/vdsm/bridge.py b/src/plugins/ovirt-host-deploy/vdsm/bridge.py index 3789d62..64cce40 100644 --- a/src/plugins/ovirt-host-deploy/vdsm/bridge.py +++ b/src/plugins/ovirt-host-deploy/vdsm/bridge.py @@ -595,7 +595,8 @@ class Plugin(plugin.PluginBase): stage=plugin.Stages.STAGE_INTERNAL_PACKAGES, ) def _internal_packages(self): - self.packager.install(packages=('iproute',)) + # self.packager.install(packages=('iproute',)) + pass @plugin.event( stage=plugin.Stages.STAGE_VALIDATION, @@ -771,27 +772,27 @@ class Plugin(plugin.PluginBase): interface = self._getInterfaceToInstallBasedOnDestination( address=self.environment[odeploycons.VdsmEnv.ENGINE_ADDRESS] ) - parameters = self._rhel_getInterfaceConfigParameters(name=interface) - - # The followin can be executed - # only at node as we won't reach here - # if we are not running on node - if ( - self.environment[odeploycons.VdsmEnv.OVIRT_NODE] and - self._interfaceIsBridge(name=interface) - ): - nic = interface.replace('br', '', 1) - self._removeBridge( - name=interface, - interface=nic, - ) - interface = nic - - self._createBridge( - name=self.environment[odeploycons.VdsmEnv.MANAGEMENT_BRIDGE_NAME], - interface=interface, - parameters=parameters, - ) + # parameters = self._rhel_getInterfaceConfigParameters(name=interface) + + # # The followin can be executed + # # only at node as we won't reach here + # # if we are not running on node + # if ( + # self.environment[odeploycons.VdsmEnv.OVIRT_NODE] and + # self._interfaceIsBridge(name=interface) + # ): + # nic = interface.replace('br', '', 1) + # self._removeBridge( + # name=interface, + # interface=nic, + # ) + # interface = nic + + # self._createBridge( + # name=self.environment[odeploycons.VdsmEnv.MANAGEMENT_BRIDGE_NAME], + # interface=interface, + # parameters=parameters, + # ) self._waitForRoute( host=( diff --git a/src/plugins/ovirt-host-deploy/vdsm/packages.py b/src/plugins/ovirt-host-deploy/vdsm/packages.py index d819caa..b526d4b 100644 --- a/src/plugins/ovirt-host-deploy/vdsm/packages.py +++ b/src/plugins/ovirt-host-deploy/vdsm/packages.py @@ -68,7 +68,8 @@ class Plugin(plugin.PluginBase): stage=plugin.Stages.STAGE_VALIDATION, ) def _validation(self): - result = self.packager.queryPackages(patterns=('vdsm',)) + # result = self.packager.queryPackages(patterns=('vdsm',)) + result = ({'version': '4.10.3', 'release': '1'},) if not result: raise RuntimeError( _( @@ -106,8 +107,8 @@ class Plugin(plugin.PluginBase): self.services.state('vdsmd', False) if self.services.exists('supervdsmd'): self.services.state('supervdsmd', False) - self.packager.install(('qemu-kvm-tools',)) - self.packager.installUpdate(('vdsm', 'vdsm-cli')) + # self.packager.install(('qemu-kvm-tools',)) + # self.packager.installUpdate(('vdsm', 'vdsm-cli')) @plugin.event( stage=plugin.Stages.STAGE_CLOSEUP, @@ -119,7 +120,7 @@ class Plugin(plugin.PluginBase): self.services.state('libvirt-guests', False) self.services.startup('libvirt-guests', False) - self.services.startup('vdsmd', True) + # self.services.startup('vdsmd', True) if not self.services.supportsDependency: if self.services.exists('libvirtd'): self.services.startup('libvirtd', True) diff --git a/src/plugins/ovirt-host-deploy/vdsm/pki.py b/src/plugins/ovirt-host-deploy/vdsm/pki.py index f374a99..c013527 100644 --- a/src/plugins/ovirt-host-deploy/vdsm/pki.py +++ b/src/plugins/ovirt-host-deploy/vdsm/pki.py @@ -208,7 +208,8 @@ class Plugin(plugin.PluginBase): condition=lambda self: self._enabled, ) def _packages(self): - self.packager.install(('m2crypto',)) + # self.packager.install(('m2crypto',)) + pass @plugin.event( stage=plugin.Stages.STAGE_MISC, diff --git a/src/plugins/ovirt-host-deploy/vdsm/software.py b/src/plugins/ovirt-host-deploy/vdsm/software.py index 2f0ec80..a226816 100644 --- a/src/plugins/ovirt-host-deploy/vdsm/software.py +++ b/src/plugins/ovirt-host-deploy/vdsm/software.py @@ -65,6 +65,8 @@ class Plugin(plugin.PluginBase): version=ver, ) ) + elif dist == 'Ubuntu': + pass else: raise RuntimeError( _('Distribution {distribution} is not supported').format( diff --git a/src/plugins/ovirt-host-deploy/vdsm/vdsmid.py b/src/plugins/ovirt-host-deploy/vdsm/vdsmid.py index 328ad17..465212a 100644 --- a/src/plugins/ovirt-host-deploy/vdsm/vdsmid.py +++ b/src/plugins/ovirt-host-deploy/vdsm/vdsmid.py @@ -78,7 +78,8 @@ class Plugin(plugin.PluginBase): ) def _packages(self): if platform.machine() in ('x86_64', 'i686'): - self.packager.install(('dmidecode',)) + # self.packager.install(('dmidecode',)) + pass @plugin.event( stage=plugin.Stages.STAGE_CUSTOMIZATION, -- 1.7.11.7 Hack patch for otopi. >From 3e7022b740f24d8053d3e32c20fa6d492631db80 Mon Sep 17 00:00:00 2001 From: Zhou Zheng Sheng <zhshzhou(a)linux.vnet.ibm.com> Date: Wed, 13 Nov 2013 17:55:39 +0800 Subject: [PATCH] Ubuntu Hacks --- src/plugins/otopi/network/hostname.py | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/src/plugins/otopi/network/hostname.py b/src/plugins/otopi/network/hostname.py index bb07627..28b4866 100644 --- a/src/plugins/otopi/network/hostname.py +++ b/src/plugins/otopi/network/hostname.py @@ -63,7 +63,8 @@ class Plugin(plugin.PluginBase): stage=plugin.Stages.STAGE_INTERNAL_PACKAGES, ) def _internal_packages(self): - self.packager.install(packages=['iproute']) + # self.packager.install(packages=['iproute']) + pass @plugin.event( stage=plugin.Stages.STAGE_VALIDATION, -- 1.7.11.7 -- Thanks and best regards! Zhou Zheng Sheng / 周征晟 E-mail: zhshzhou(a)linux.vnet.ibm.com Telephone: 86-10-82454397

5 10

[Engine-devel] Question about Engine user session timeout
by Vojtech Szocs 19 Nov '13

19 Nov '13

Hi guys, I see two different config values for dealing with Engine user session timeout. First, from packaging/etc/engine-config/engine-config.properties file: - UserSessionTimeOutInterval.description=Session timeout interval in minutes, after which it will be expired and clean. A negative value indicates the session should never timeout. - UserSessionTimeOutInvalidationInterval.description=Session timeout invalidation interval in minutes. Specifies the interval in which the invalidation check should occur. Then, in org.ovirt.engine.core.common.config.ConfigValues enum: - UserSessionTimeOutInterval (default 30) - UserSessionTimeOutInvalidationInterval (default 30) Looking at Backend#Initialize, both of these values are used when scheduling "cleanExpiredUsersSessions" job: - UserSessionTimeOutInterval = initialDelay param, i.e. the initial delay before the first activation [SchedulerUtil#scheduleAFixedDelayJob] - UserSessionTimeOutInvalidationInterval = taskDelay param, i.e. the delay between jobs [SchedulerUtil#scheduleAFixedDelayJob] So if I read this correctly, if UserSessionTimeOutInterval=100 then UserSessionTimeOutInvalidationInterval is relevant only after first 100min of Engine uptime. Why do we have two different config values for Engine user session timeout? i.e. why don't we use same value for both initialDelay & taskDelay param? Thanks, Vojtech

3 6

[Engine-devel] When is ovirt-engine expected to start supporting wildfly?
by Mooli Tayer 19 Nov '13

19 Nov '13

Thanks, Mooli Tayer.

4 4

[Engine-devel] [UX] how to design a bar/line chart?
by Tomas Jelinek 18 Nov '13

18 Nov '13

Hi all, There is a feature request [1] which aims to replace the resource utilization graphs (for example the cpu utilization from vm tab) by some which shows not only the actual percentage which is not so useful by some monitor graph. I have the following concerns: - I can think of a bar chart or a line chart and not sure what would be better. - Not sure if replacing the current chart with a bar/line chart would make the statistics readable enough. Maybe if you hover the chart it could pop up a bigger version of the chart? Or not needed? - Would it be enough to have it in one color? Or should it be something like "the bigger the utilization the more red"? Please advise from the UX perspective. As soon as the final design will be a bit more clear I will provide a feature page. Thank you, Tomas [1]: https://bugzilla.redhat.com/show_bug.cgi?id=803251

11 51

[Engine-devel] Using REST API in web UI - design proposal review call
by Vojtech Szocs 18 Nov '13

18 Nov '13

Hi everyone, we're moving towards using REST API in web UI (i.e. WebAdmin and UserPortal) and would like to hear your opinion on the matter. The initial meeting (conference call) is scheduled on Wednesday, November 20 at 14:30 CET / 15:30 TLV / 08:30 Boston timezone. I'll send the meeting invite with details in a separate email. Everyone is welcome to join and share his (her) thoughts. Regards, Vojtech PS: don't be scared to join just because there's "web UI" in meeting name! This is mostly about the general concept and design of oVirt SDK for JavaScript.

2 2

[Engine-devel] REST API in web UI - design proposal review call
by Vojtech Szocs 18 Nov '13

18 Nov '13

------=_Part_26065156_1804954053.1384790432845 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit The following is a new meeting request: Subject: REST API in web UI - design proposal review call Organizer: "Vojtech Szocs" <vszocs(a)redhat.com> Time: Wednesday, November 20, 2013, 2:30:00 PM - 4:30:00 PM GMT +01:00 Belgrade, Bratislava, Budapest, Ljubljana, Prague Required: Optional: engine-devel(a)ovirt.org *~*~*~*~*~*~*~*~*~* Hi guys, we're moving towards using REST API in web UI (i.e. WebAdmin and UserPortal) and would like to hear your opinion on the matter. This is a review call to summarize and discuss "Using REST API In Web UI" feature design proposal: http://www.ovirt.org/Features/Design/Using_REST_API_In_Web_UI Meeting agenda: - review current state, i.e. using GWT RPC - review main aspects of design proposal - discussion / feel free to ask questions anytime during the meeting Estimated duration: ~2 hrs. To join this meeting, dial into the Intercall bridge and use following conference code: 712 886 7405 # [https://www.intercallonline.com/listNumbersByCode.action?confCode=7128867405] Everyone is welcome to join and share his (her) thoughts. Regards, Vojtech ------=_Part_26065156_1804954053.1384790432845 Content-Type: text/calendar; charset=utf-8; method=REQUEST; name=meeting.ics Content-Transfer-Encoding: 7bit BEGIN:VCALENDAR PRODID:Zimbra-Calendar-Provider VERSION:2.0 METHOD:REQUEST BEGIN:VTIMEZONE TZID:Europe/Belgrade BEGIN:STANDARD DTSTART:16010101T030000 TZOFFSETTO:+0100 TZOFFSETFROM:+0200 RRULE:FREQ=YEARLY;WKST=MO;INTERVAL=1;BYMONTH=10;BYDAY=-1SU TZNAME:CET END:STANDARD BEGIN:DAYLIGHT DTSTART:16010101T020000 TZOFFSETTO:+0200 TZOFFSETFROM:+0100 RRULE:FREQ=YEARLY;WKST=MO;INTERVAL=1;BYMONTH=3;BYDAY=-1SU TZNAME:CEST END:DAYLIGHT END:VTIMEZONE BEGIN:VEVENT UID:8ec06680-c452-4cd9-a6fe-b94dd32a813d SUMMARY:REST API in web UI - design proposal review call ATTENDEE;CN=engine-devel;ROLE=OPT-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRU E:mailto:engine-devel@ovirt.org ORGANIZER;CN=Vojtech Szocs:mailto:vszocs@redhat.com DTSTART;TZID="Europe/Belgrade":20131120T143000 DTEND;TZID="Europe/Belgrade":20131120T163000 STATUS:CONFIRMED CLASS:PUBLIC X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY TRANSP:OPAQUE LAST-MODIFIED:20131118T160032Z DTSTAMP:20131118T160032Z SEQUENCE:0 DESCRIPTION:The following is a new meeting request:\n\nSubject: REST API in web UI - design proposal review call \nOrganizer: "Vojtech Szocs" <vszocs@re dhat.com> \n\nTime: Wednesday\, November 20\, 2013\, 2:30:00 PM - 4:30:00 PM GMT +01:00 Belgrade\, Bratislava\, Budapest\, Ljubljana\, Prague\n \nRequir ed: \nOptional: engine-devel(a)ovirt.org \n\n*~*~*~*~*~*~*~*~*~*\n\nHi guys\, \n\nwe're moving towards using REST API in web UI (i.e. WebAdmin and UserPor tal) and would like to hear your opinion on the matter.\n\nThis is a review call to summarize and discuss "Using REST API In Web UI" feature design prop osal: http://www.ovirt.org/Features/Design/Using_REST_API_In_Web_UI\n\nMeeti ng agenda:\n- review current state\, i.e. using GWT RPC\n- review main aspec ts of design proposal\n- discussion / feel free to ask questions anytime dur ing the meeting\n\nEstimated duration: ~2 hrs.\n\nTo join this meeting\, dia l into the Intercall bridge and use following conference code: 712 886 7405 # [https://www.intercallonline.com/listNumbersByCode.action?confCode=7128867 405]\n\nEveryone is welcome to join and share his (her) thoughts.\n\nRegards \,\nVojtech\n BEGIN:VALARM ACTION:DISPLAY TRIGGER;RELATED=START:-PT5M DESCRIPTION:Reminder END:VALARM END:VEVENT END:VCALENDAR ------=_Part_26065156_1804954053.1384790432845--

1 0