June 2018 - Users - oVirt List Archives

oVirt host deploy: disable multipath
by femi adegoke 27 Mar '23

27 Mar '23

https://bugzilla.redhat.com/show_bug.cgi?id=1472356 There are 2 drives in my install that oVirt is claiming as multipath. I have tried blacklisting at /etc/multipath/ but that hasn't worked. Any better solutions? I need these 2 drives to be non-multipathed.

4 19

Network Address Change
by Paul.LKW 28 Dec '22

28 Dec '22

Hi All: I just has a case, I need to change the oVirt host and engine IP address due to data center decommission I checked in the hosted-engine host there are some files I could change ; in ovirt-hosted-engine/hosted-engine.conf ca_subject="O=simple.com, CN=1.2.3.4" gateway=1.2.3.254 and of course I need to change the ovirtmgmt interface IP too, I think just change the above line could do the tick, but where could I change the other host IP in the cluster ? I think I have to be lost all the host as once changed the hosted-engine host IP as it is in diff. sub net. Does there any command line tools could do that or someone has such experience could share? Best Regards, Paul.LKW

4 6

looking for some ISV backup software which integrates the backup API
by Nathanaël Blanchet 08 Jun '22

08 Jun '22

Hello, We are about to change our backup provider, and I find it is a great chance to choose a full supported ovirt backup solution. I currently use this python script vm-backup-scheduler (https://github.com/wefixit-AT/oVirtBackup) but it is not the workflow officially suggested by the community (https://www.ovirt.org/develop/release-management/features/storage/backup-re…) I've been looking for a long time an ISV who supports such an API, but the only one I found is this one : Acronis Backup Advanced suggested here https://access.redhat.com/ecosystem/search/#/ecosystem/Red%20Hat%20Enterpri… I ran the trial version, but it doesn't seem to do better than the vm-backup-scheduler script, and it doesn't seem to use the backup API (attach a clone as a disk to an existing vm). Can you suggest me some other ISV solutions, if they ever exist... or share me your backup experience?

5 4

OVS switch type for hosted-engine
by Devin A. Bougie 06 May '22

06 May '22

Is it possible to setup a hosted engine using the OVS switch type instead of Legacy? If it's not possible to start out as OVS, instructions for switching from Legacy to OVS after the fact would be greatly appreciated. Many thanks, Devin

4 5

USB3 redirection
by Rik Theys 19 Apr '22

19 Apr '22

Hi, I'm trying to assign a USB3 controller to a CentOS 7.4 VM in oVirt 4.1 with USB redirection enabled. I've created the following file in /etc/ovirt-engine/osinfo.conf.d: 01-usb.properties with content os.other.devices.usb.controller.value = nec-xhci and have restarted ovirt-engine. If I disable USB-support in the web interface for the VM, the xhci controller is added to the VM (I can see it in the qemu-kvm commandline), but usb redirection is not available. If I enable USB-support in the UI, no xhci controller is added (only 4 uhci controllers). Is there a way to make the controllers for usb redirection xhci controllers? Regards, Rik -- Rik Theys System Engineer KU Leuven - Dept. Elektrotechniek (ESAT) Kasteelpark Arenberg 10 bus 2440 - B-3001 Leuven-Heverlee +32(0)16/32.11.07 ---------------------------------------------------------------- <<Any errors in spelling, tact or fact are transmission errors>>

3 5

OVN routing and firewalling in oVirt
by Gianluca Cecchi 19 Apr '22

19 Apr '22

Hello, how do we manage routing between different OVN networks in oVirt? And between OVN networks and physical ones? Based on architecture read here: http://openvswitch.org/support/dist-docs/ovn-architecture.7.html I see terms for logical routers and gateway routers respectively but how to apply to oVirt configuration? Do I have to choose between setting up a specialized VM or a physical one: is it applicable/advisable to put on oVirt host itself the gateway functionality? Is there any security policy (like security groups in Openstack) to implement? Thanks, Gianluca

4 6

Install hosted-engine - Task Get local VM IP failed
by florentl 10 Mar '22

10 Mar '22

Hi all, I try to install hosted-engine on node : ovirt-node-ng-4.2.3-0.20180518. Every times I get stuck on : [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:6c:5a:91 | awk '{ print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.108872", "end": "2018-06-01 11:17:34.421769", "rc": 0, "start": "2018-06-01 11:17:34.312897", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} I tried with static IP Address and with DHCP but both failed. To be more specific, I installed three nodes, deployed glusterfs with the wizard. I'm in a nested virtualization environment for this lab (Vmware Esxi Hypervisor). My node IP is : 192.168.176.40 / and I want the hosted-engine vm has 192.168.176.43. Thanks, Florent

7 17

OVN and change of mgmt network
by Gianluca Cecchi 26 Jan '21

26 Jan '21

Hello, I previously had OVN running on engine (as OVN provider with northd and northbound and southbound DBs) and hosts (with OVN controller). After changing mgmt ip of hosts (engine has retained instead the same ip), I executed again on them the command: vdsm-tool ovn-config <ip_of_engine> <nel_local_ip_of_host> Now I think I have to clean up some things, eg: 1) On engine where I get these lines below systemctl status ovn-northd.service -l . . . Sep 29 14:41:42 ovmgr1 ovsdb-server[940]: ovs|00005|reconnect|ERR|tcp: 10.4.167.40:37272: no response to inactivity probe after 5 seconds, disconnecting Oct 03 11:52:00 ovmgr1 ovsdb-server[940]: ovs|00006|reconnect|ERR|tcp: 10.4.167.41:52078: no response to inactivity probe after 5 seconds, disconnecting The two IPs are the old ones of two hosts It seems that a restart of the services has fixed... Can anyone confirm if I have to do anything else? 2) On hosts (there are 3 hosts with OVN on ip 10.4.192.32/33/34) where I currently have this output [root@ov301 ~]# ovs-vsctl show 3a38c5bb-0abf-493d-a2e6-345af8aedfe3 Bridge br-int fail_mode: secure Port "ovn-1dce5b-0" Interface "ovn-1dce5b-0" type: geneve options: {csum="true", key=flow, remote_ip="10.4.192.32"} Port "ovn-ddecf0-0" Interface "ovn-ddecf0-0" type: geneve options: {csum="true", key=flow, remote_ip="10.4.192.33"} Port "ovn-fd413b-0" Interface "ovn-fd413b-0" type: geneve options: {csum="true", key=flow, remote_ip="10.4.168.74"} Port br-int Interface br-int type: internal ovs_version: "2.7.2" [root@ov301 ~]# The IPs of kind 10.4.192.x are ok. But there is a left-over of an old host I initially used for tests, corresponding to 10.4.168.74, that now doesn't exist anymore How can I clean records for 1) and 2)? Thanks, Gianluca

3 4

deprecating export domain?
by Charles Kozler 30 Aug '20

30 Aug '20

Hello, I recently read on this list from a redhat member that export domain is either being deprecated or looking at being deprecated To that end, can you share details? Can you share any notes/postings/bz's that document this? I would imagine something like this would be discussed in larger audience This seems like a somewhat significant change to make and I am curious where this is scheduled? Currently, a lot of my backups rely explicitly on an export domain for online snapshots, so I'd like to plan accordingly Thanks!

11 21

Vm suddenly paused with error "vm has paused due to unknown storage error"
by Jasper Siero 18 Feb '20

18 Feb '20

Hi all, Since we upgraded our Ovirt nodes to CentOS 7 a vm (not a specific one but never more then one) will sometimes pause suddenly with the error "VM ... has paused due to unknown storage error". It happens now two times in a month. The Ovirt node uses san storage for the vm's running on it. When a specific vm is pausing with an error the other vm's keeps running without problems. The vm runs without problems after unpausing it. Versions: CentOS Linux release 7.1.1503 vdsm-4.14.17-0 libvirt-daemon-1.2.8-16 vdsm.log: VM Channels Listener::DEBUG::2015-10-25 07:43:54,382::vmChannels::95::vds::(_handle_timeouts) Timeout on fileno 78. libvirtEventLoop::INFO::2015-10-25 07:43:56,177::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother libvirtEventLoop::DEBUG::2015-10-25 07:43:56,178::vm::5204::vm.Vm::(_onLibvirtLifecycleEvent) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::event Suspended detail 2 opaque None libvirtEventLoop::INFO::2015-10-25 07:43:56,178::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother ........... libvirtEventLoop::INFO::2015-10-25 07:43:56,180::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother specific error part in libvirt vm log: block I/O error in device 'drive-virtio-disk0': Unknown error 32758 (32758) ........... block I/O error in device 'drive-virtio-disk0': Unknown error 32758 (32758) engine.log: 2015-10-25 07:44:48,945 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-40) [a43dcc8] VM diataal-prod-cas1 77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb moved from Up --> Paused 2015-10-25 07:44:49,003 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-40) [a43dcc8] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VM diataal-prod-cas1 has paused due to unknown storage error. Has anyone experienced the same problem or knows a way to solve this? Kind regards, Jasper

3 3

Agentless backup solutions
by femi adegoke 07 Aug '19

07 Aug '19

What backup solutions are people using? I'm only interested in host-level backups (no agents in the vm's) I am aware of the following products: https://storware.eu/en/storware-vprotect/ https://github.com/zipurman/oVIRT_Simple_Backup https://www.sepusa.com/ Any others?

9 16

Unable to find OVF_STORE after recovery / upgrade
by Sam Cappello 26 May '19

26 May '19

This is a multi-part message in MIME format. --------------05F3D0780062C6D37C1619A7 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Hi, so i was running a 3.4 hosted engine two node setup on centos 6, had some disk issues so i tried to upgrade to centos 7 and follow the path 3.4 > 3.5 > 3.6 > 4.0. i screwed up dig time somewhere between 3.6 and 4.0, so i wiped the drives, installed a fresh 4.0.3, then created the database and restored the 3.6 engine backup before running engine-setup as per the docs. things seemed to work, but i have the the following issues / symptoms: - ovirt-ha-agent running 100% CPU on both nodes - messages in the UI that the Hosted Engine storage Domain isn't active and Failed to import the Hosted Engine Storage Domain - hosted engine is not visible in the UI and the following repeating in the agent.log: MainThread::INFO::2016-10-03 12:38:27,718::hosted_engine::461::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Current state EngineUp (score: 3400) MainThread::INFO::2016-10-03 12:38:27,720::hosted_engine::466::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Best remote host vmhost1.oracool.net (id: 1, score: 3400) MainThread::INFO::2016-10-03 12:38:37,979::states::421::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume) Engine vm running on localhost MainThread::INFO::2016-10-03 12:38:37,985::hosted_engine::612::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Initializing VDSM MainThread::INFO::2016-10-03 12:38:45,645::hosted_engine::639::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Connecting the storage MainThread::INFO::2016-10-03 12:38:45,647::storage_server::219::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2016-10-03 12:39:00,543::storage_server::226::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2016-10-03 12:39:00,562::storage_server::233::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Refreshing the storage domain MainThread::INFO::2016-10-03 12:39:01,235::hosted_engine::666::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Preparing images MainThread::INFO::2016-10-03 12:39:01,236::image::126::ovirt_hosted_engine_ha.lib.image.Image::(prepare_images) Preparing images MainThread::INFO::2016-10-03 12:39:09,295::hosted_engine::669::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Reloading vm.conf from the shared storage domain MainThread::INFO::2016-10-03 12:39:09,296::config::206::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Trying to get a fresher copy of vm configuration from the OVF_STORE MainThread::WARNING::2016-10-03 12:39:16,928::ovf_store::107::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan) Unable to find OVF_STORE MainThread::ERROR::2016-10-03 12:39:16,934::config::235::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Unable to get vm.conf from OVF_STORE, falling back to initial vm.conf I have searched a bit and not really found a solution, and have come to the conclusion that i have made a mess of things, and am wondering if the best solution is to export the VMs, and reinstall everything then import them back? i am using remote NFS storage. if i try and add the hosted engine storage domain it says it is already registered. i have also upgraded and am now running oVirt Engine Version: 4.0.4.4-1.el7.centos hosts were installed using ovirt-node. currently at 3.10.0-327.28.3.el7.x86_64 if a fresh install is best, any advice / pointer to doc that explains best way to do this? i have not moved my most important server over to this cluster yet so i can take some downtime to reinstall. thanks! sam --------------05F3D0780062C6D37C1619A7 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hi,<br> so i was running a 3.4 hosted engine two node setup on centos 6, had some disk issues so i tried to upgrade to centos 7 and follow the path 3.4 > 3.5 > 3.6 > 4.0. i screwed up dig time somewhere between 3.6 and 4.0, so i wiped the drives, installed a fresh 4.0.3, then created the database and restored the 3.6 engine backup before running engine-setup as per the docs. things seemed to work, but i have the the following issues / symptoms:<br> - ovirt-ha-agent running 100% CPU on both nodes<br> - messages in the UI that the Hosted Engine storage Domain isn't active and Failed to import the Hosted Engine Storage Domain<br> - hosted engine is not visible in the UI<br> and the following repeating in the agent.log:<br> <br> MainThread::INFO::2016-10-03 12:38:27,718::hosted_engine::461::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Current state EngineUp (score: 3400)<br> MainThread::INFO::2016-10-03 12:38:27,720::hosted_engine::466::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Best remote host vmhost1.oracool.net (id: 1, score: 3400)<br> MainThread::INFO::2016-10-03 12:38:37,979::states::421::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume) Engine vm running on localhost<br> MainThread::INFO::2016-10-03 12:38:37,985::hosted_engine::612::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Initializing VDSM<br> MainThread::INFO::2016-10-03 12:38:45,645::hosted_engine::639::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Connecting the storage<br> MainThread::INFO::2016-10-03 12:38:45,647::storage_server::219::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server<br> MainThread::INFO::2016-10-03 12:39:00,543::storage_server::226::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server<br> MainThread::INFO::2016-10-03 12:39:00,562::storage_server::233::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Refreshing the storage domain<br> MainThread::INFO::2016-10-03 12:39:01,235::hosted_engine::666::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Preparing images<br> MainThread::INFO::2016-10-03 12:39:01,236::image::126::ovirt_hosted_engine_ha.lib.image.Image::(prepare_images) Preparing images<br> MainThread::INFO::2016-10-03 12:39:09,295::hosted_engine::669::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Reloading vm.conf from the shared storage domain<br> MainThread::INFO::2016-10-03 12:39:09,296::config::206::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Trying to get a fresher copy of vm configuration from the OVF_STORE<br> MainThread::WARNING::2016-10-03 12:39:16,928::ovf_store::107::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan) Unable to find OVF_STORE<br> MainThread::ERROR::2016-10-03 12:39:16,934::config::235::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Unable to get vm.conf from OVF_STORE, falling back to initial vm.conf<br> <br> I have searched a bit and not really found a solution, and have come to the conclusion that i have made a mess of things, and am wondering if the best solution is to export the VMs, and reinstall everything then import them back?<br> i am using remote NFS storage.<br> if i try and add the hosted engine storage domain it says it is already registered.<br> i have also upgraded and am now running <span class="gwt-InlineLabel">oVirt Engine Version: 4.0.4.4-1.el7.centos<br> hosts were installed using ovirt-node. currently at 3.10.0-327.28.3.el7.x86_64<br> if a fresh install is best, any advice / pointer to doc that explains best way to do this?<br> i have not moved my most important server over to this cluster yet so i can take some downtime to reinstall.<br> thanks!<br> sam<br> <br> </span><br> </body> </html> --------------05F3D0780062C6D37C1619A7--

3 2

[Users] Problem Creating "oVirtEngine" Machine
by Richie＠HIP 15 May '19

15 May '19

--Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=windows-1252 I can't agree with you more. Modifying every box's or Virtual Machine's = HOSTS file with a FQDN and IP SHOULD work, but in my case it is not. = There are several reasons I've come to believe could be the problem = during my trial-and-errors testing and learning. FIRST - MACHINE IPs. THe machine's "Names" where not appearing in the Microsoft Active = Directory DHCP along with their assigned IPs; in other words, the DHCP = just showed an "Assigned IP", equal to the Linux Machine's IP, with a = <empty> ('i.e. blank, none, silch, plan old "no-letters-or-numbers") = "Name" in the "Name" (i.e. machines "network name", or FQDN-value used = by the Windows AD DNS-service) column. =20 if your IP is is appearing with an <empty> "name", there is no "host = name" to associate the IP, it makes it difficult to define a FQDN; which = isn't that useful if we're going to use the HOSTS files in all = participating machines in an oVirt Installation. I kept banging my head for three (3) long hours trying to find the = problem. In Fedora 18, I could't find where the "network name" of the machine = could be defined. =20 I tried putting the "Additional Search Domains" and/or "DHCP Client ID" = in Fedora's 18 Desktop - under "System Settings > Hardware > Network > = Options > IPv4 Setting" The DHCP went crazy; showing an "Aberrant-MAC-Address" (i.e. a really = long-sting value where the machine's MAC address should be), and we knew = the MAC address as we obtained using "ifconfig" on the machine getting = it's IP from the DHCP. So we reverted these entries from the = aforementioned, rebooted, and got an assigned IP, with proper MAC = address, but still no "Name" Kept wondering around the "Settings" and seeing which one made sense, = but what the heck, I went for it. =20 Under "System Settings > System > Details" I found the information about = GNOME and the machine's hardware. =20 There was a field for "Device Name" that originally had = "localhost.localdomain"; I changed the value to "ovirtmanager". and = under "Graphic" changed to "Forced Fallback Mode" to "ON". =20 I also installed all Kerberos libraries and client (i.e. authconfig-gtk, = authhub, authhub-client, krb5-apple-clents, krb5-auth-dialog, = krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) and rebooted VOILA=85!!! =20 I don;t know if it was the definition of "Device Name" from = "localhost.localdomain" to "ovirtengine", of the Kerberos libraries = install, or both. But finally the MS AD DHCP was showing the = Addigned-IP, the machine "Name" and the proper MAC-address. Regardless, = setting the machine's "Network Name" under "System Settings > System > = Details > Device Name", with no explanation of what "Device Name" meant = or was used for, was the last place I would have imagined this network = setting could be defined. NOTE - Somebody has to try the two steps I did together, separately. to = see which one is the real problem-solver; for me it is working, and "if = it ain't broke, don't fix it=85" Now that I have the DHCP / IP thing sorted, I have to do the DNS stuff. To this point, I've addressed the DHCP and "Network Name" of the = IP-Lease (required for the DNS to work). This still does't completely = explain why, by modifying the HOSTS file (allowing be to set and IP and = non-DNS FQDN). allows me to install the oVirtEngine "as long as I do not = use default HTTPd service parameters as suggested by the install". By = using the HOST file to "define" FQDNs, AND NOT using the default HTTPd = suggested changes, I'm able to install the oVirtEngine (given that I use = ports 8700 and 8701) to access the "oVirtEngine Welcome Screen", BUT = NONE of the "oVirt Portals" work=85 YET=85!!! More to come during the week Richie Jos=E9 E ("Richie") Piovanetti, MD, MS=20 M: 787-615-4884 | richiepiovanetti(a)healthcareinfopartners.com On Aug 2, 2013, at 3:10 AM, Joop <jvdwege(a)xs4all.nl> wrote: > Hello Ritchie, >=20 >> In a conversation via IRC, someone suggested that I activate = "dnsmask" to overcome what appears to be a DNS problem. I'll try that = other possibility once I get home later today. >>=20 >> In the mean time, what do you mean by "fixing the hostname"=85? I = opened and fixed the HOSTNAMES and changed it from = "localhost-localdomain" to "localhost.localdomain" and that made no = difference. Albeit, after changing I didm;t restart, remove ovirtEngine = ((using "engine-cleanup") and reinstalled via "engine-setup". Is that = what you mean=85? >>=20 >>=20 >>=20 >> In the mean time, the fact that even if I resolve the issue of = oVirtEngine I will not be able to connect to the oVirt Nodes unless I = have DNS resolution, apparently means I should do something with = resolving via DNS in my home LAN (i.e implement some sort of "DNS Cache" = so I can resolve my home computers via DNS inside my LAN). >>=20 >> Any suggestions are MORE THAN WELCOME=85!!! >> =20 >=20 > Having setup ovirt more than I can count right now I share your = feeling that it isn't always clear why things are going wrong, but in = this case I suspect that there is a rather small thing missing. > In short if you setup ovirt-engine, either using virtualbox or on real = hardware, and you give your host a meaningfull name AND you add that = info also in your /etc/hosts file than things SHOULD work, no need for = dnsmasq or even bind. Would make things easier once you start adding = virt hosts to you infrastructure since you will need to duplicate these = actions on each host (add engine name/ip to each host and add each host = to the others and all hosts to engine) >=20 > Just ask if you need more assistance and I will write down a small = howto that should work out of the box else I might have some time to see = if I can get things going. >=20 > Regards, >=20 > Joop >=20 --Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=windows-1252 <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html = charset=3Dwindows-1252"></head><body style=3D"word-wrap: break-word; = -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">I = can't agree with you more.  Modifying every box's or Virtual = Machine's HOSTS file with a FQDN and IP SHOULD work, but in my case it = is not.  There are several reasons I've come to believe could be = the problem during my trial-and-errors testing and = learning.<div><div><br></div><div>FIRST - MACHINE IPs.</div><ul = class=3D"MailOutline"><li>THe machine's "Names" where not appearing in = the <b>Microsoft Active Directory DHCP</b> along with their assigned = IPs; in other words, the DHCP just showed an "Assigned IP", equal to the = Linux Machine's IP, with a <empty> ('i.e. blank, none, silch, plan = old "no-letters-or-numbers") "Name" in the "Name" (i.e. machines = "network name", or FQDN-value used by the Windows AD DNS-service) = column.  </li><li>if your IP is is appearing with an <empty> = "name", there is no "host name" to associate the IP, it makes it = difficult to define a FQDN; which isn't that useful if we're going to = use the HOSTS files in all participating machines in an oVirt = Installation.</li><li>I kept banging my head for three (3) long hours = trying to find the problem.</li><ul><li>In Fedora 18, I could't find = where the "network name" of the machine could be defined. =  </li><li>I tried putting the "Additional Search Domains" and/or = "DHCP Client ID" in Fedora's 18 Desktop - under "System Settings > = Hardware > Network > Options > IPv4 Setting"</li><ul><li>The = DHCP went crazy;  showing an "Aberrant-MAC-Address" (i.e. a really = long-sting value where the machine's MAC address should be), and we knew = the MAC address as we obtained using "ifconfig" on the machine getting = it's IP from the DHCP.  So we reverted these entries from the = aforementioned, rebooted, and got an assigned IP, with proper MAC = address, but still no "Name"</li></ul><li>Kept wondering around the = "Settings" and seeing which one made sense, but what the heck, I went = for it.  </li><ul><li>Under "System Settings > System > = Details" I found the information about GNOME and the machine's hardware. =  </li><li>There was a field for "Device Name" that originally had = "localhost.localdomain"; I changed the value to "ovirtmanager". and = under "Graphic" changed to "Forced Fallback Mode" to "ON". =  </li><li>I also installed all Kerberos libraries and client (i.e. = authconfig-gtk, authhub, authhub-client, krb5-apple-clents, = krb5-auth-dialog, krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) = and rebooted</li><li>VOILA=85!!!  </li></ul><li>I don;t know if it = was the definition of "Device Name" from "localhost.localdomain" to = "ovirtengine", of the Kerberos libraries install, or both.  But = finally the MS AD DHCP was showing the Addigned-IP, the machine "Name" = and the proper MAC-address.  Regardless, setting the machine's = "Network Name" under "System Settings > System > Details = > Device Name", with no explanation of what "Device Name" meant = or was used for, was the last place I would have imagined this = network setting could be defined.</li><li><b>NOTE</b> - Somebody has to = try the two steps I did together, separately. to see which one is the = real problem-solver; for me it is working, and "if it ain't broke, don't = fix it=85"</li></ul></ul><div><br = class=3D"webkit-block-placeholder"></div><div>Now that I have the DHCP / = IP thing sorted, I have to do the DNS stuff.</div><div><br></div><div>To = this point, I've addressed the DHCP and "Network Name" of the IP-Lease = (required for the DNS to work).  This still does't completely = explain why, by modifying the HOSTS file (allowing be to set and IP and = non-DNS FQDN). allows me to install the oVirtEngine "<b><i>as long as I = do not use default  HTTPd service parameters as suggested by the = install</i></b>".  <b>By using the HOST file to "define" FQDNs, AND = NOT using the default HTTPd suggested changes, I'm able to install the = oVirtEngine (given that I use ports 8700 and 8701) to access the = "oVirtEngine Welcome Screen", BUT NONE of the "oVirt Portals" work</b>=85 = YET=85!!!</div><div><br></div><div>More to come during the = week</div><div><br></div><div>Richie</div><div = apple-content-edited=3D"true"><br>Jos=E9 E ("Richie") Piovanetti, MD, = MS <br>M: 787-615-4884 | <a = href=3D"mailto:richiepiovanetti@healthcareinfopartners.com">richiepiovanet= ti(a)healthcareinfopartners.com</a><br><br><br><br><br><br></div><br><div><d= iv>On Aug 2, 2013, at 3:10 AM, Joop <<a = href=3D"mailto:jvdwege@xs4all.nl">jvdwege(a)xs4all.nl</a>> = wrote:</div><br class=3D"Apple-interchange-newline"><blockquote = type=3D"cite">Hello Ritchie,<br><br><blockquote type=3D"cite">In a = conversation via IRC, someone suggested that I activate "dnsmask" to = overcome what appears to be a DNS problem.  I'll try that other = possibility once I get home later today.<br><br>In the mean time, what = do you mean by "fixing the hostname"=85?  I opened and fixed the = HOSTNAMES and changed it from "localhost-localdomain" to = "localhost.localdomain" and that made no difference.  Albeit, after = changing I didm;t restart, remove ovirtEngine ((using "engine-cleanup") = and reinstalled via "engine-setup".  Is that what you = mean=85?<br><br><br><br>In the mean time, the fact that even if I = resolve the issue of oVirtEngine I will not be able to connect to the = oVirt Nodes unless I have DNS resolution, apparently means I should do = something with resolving via DNS in my home LAN (i.e implement some sort = of "DNS Cache" so I can resolve my home computers via DNS inside my = LAN).<br><br>Any suggestions are MORE THAN WELCOME=85!!!<br> =  <br></blockquote><br>Having setup ovirt more than I can count = right now I share your feeling that it isn't always clear why things are = going wrong, but in this case I suspect that there is a rather small = thing missing.<br>In short if you setup ovirt-engine, either using = virtualbox or on real hardware, and you give your host a meaningfull = name AND you add that info also in your /etc/hosts file than things = SHOULD work, no need for dnsmasq or even bind. Would make things easier = once you start adding virt hosts to you infrastructure since you will = need to duplicate these actions on each host (add engine name/ip to each = host and add each host to the others and all hosts to = engine)<br><br>Just ask if you need more assistance and I will write = down a small howto that should work out of the box else I might have = some time to see if I can get things = going.<br><br>Regards,<br><br>Joop<br><br></blockquote></div><br></div></b= ody></html>= --Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241--

2 1

Re: [ovirt-users] Question about the ovirt-engine-sdk-java
by Michael Pasternak 15 May '19

15 May '19

------=_Part_1975902_834617789.1445161505459 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Hi=C2=A0Salifou, Actually java sdk is=C2=A0intentionally=C2=A0hiding transport level interna= ls so developers could stay in java domain,if your headers are static, easi= est way would be using reverse proxy in a middle to intercept requests,=C2= =A0 can you tell me why do you need this? =20 On Friday, October 16, 2015 1:14 AM, Salifou Sidi M. Malick <ssidimah@= redhat.com> wrote: =20 Hi Micheal, I have a question about the ovirt-engine-sdk-java. Is there a way to add custom request headers to each RHEVM API call? Here is an example of a request that I would like to do: $ curl -v -k \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "ID: user1(a)ad.xyz.com" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "PASSWORD: Pwssd" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "TARGET: kobe" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 https://vm0.smalick.com/api/hosts I would like to add ID, PASSWORD and TARGET as HTTP request header.=20 Thanks, Salifou ------=_Part_1975902_834617789.1445161505459 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable <html><head></head><body><div style=3D"color:#000; background-color:#fff; f= ont-family:HelveticaNeue-Light, Helvetica Neue Light, Helvetica Neue, Helve= tica, Arial, Lucida Grande, sans-serif;font-size:13px"><div id=3D"yui_3_16_= 0_1_1445160422533_3555" dir=3D"ltr"><span id=3D"yui_3_16_0_1_1445160422533_= 4552">Hi </span><span style=3D"font-family: 'Helvetica Neue', 'Segoe U= I', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"yui_3_16_0_1_1445= 160422533_3568" class=3D"">Salifou,</span></div><div id=3D"yui_3_16_0_1_144= 5160422533_3555" dir=3D"ltr"><span style=3D"font-family: 'Helvetica Neue', = 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" class=3D""><br>= </span></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span = style=3D"font-family: 'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Luci= da Grande', sans-serif;" class=3D"" id=3D"yui_3_16_0_1_1445160422533_3595">= Actually java sdk is </span><span style=3D"font-family: 'Helvetica Neu= e', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"yui_3= _16_0_1_1445160422533_4360" class=3D"">intentionally </span><span styl= e=3D"font-family: 'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Lucida G= rande', sans-serif;" id=3D"yui_3_16_0_1_1445160422533_4362" class=3D"">hidi= ng transport level internals so developers could stay in java domain,</span= ></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span class= =3D"" id=3D"yui_3_16_0_1_1445160422533_4435"><font face=3D"Helvetica Neue, = Segoe UI, Helvetica, Arial, Lucida Grande, sans-serif" id=3D"yui_3_16_0_1_1= 445160422533_4432" class=3D"">if your headers are static, easiest way would= be using reverse proxy in a middle to intercept requests, </font><br>= </span></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span = class=3D""><font face=3D"Helvetica Neue, Segoe UI, Helvetica, Arial, Lucida= Grande, sans-serif" class=3D""><br></font></span></div><div id=3D"yui_3_16= _0_1_1445160422533_3555" dir=3D"ltr"><span style=3D"font-family: 'Helvetica= Neue', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"y= ui_3_16_0_1_1445160422533_4357">can you tell me why do you need this?</span= ><br></div> <br><div class=3D"qtdSeparateBR"><br><br></div><div class=3D"y= ahoo_quoted" style=3D"display: block;"> <div style=3D"font-family: Helvetic= aNeue-Light, Helvetica Neue Light, Helvetica Neue, Helvetica, Arial, Lucida= Grande, sans-serif; font-size: 13px;"> <div style=3D"font-family: Helvetic= aNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-si= ze: 16px;"> <div dir=3D"ltr"> <font size=3D"2" face=3D"Arial"> On Friday, O= ctober 16, 2015 1:14 AM, Salifou Sidi M. Malick <ssidimah(a)redhat.com>= wrote:<br> </font> </div> <br><br> <div class=3D"y_msg_container">Hi Mich= eal,<br><br>I have a question about the ovirt-engine-sdk-java.<br><br>Is th= ere a way to add custom request headers to each RHEVM API call?<br><br>Here= is an example of a request that I would like to do:<br><br>$ curl -v -k \<= br>          -H "ID: <a ymailto=3D"mailto:user1@ad= .xyz.com" href=3D"mailto:user1@ad.xyz.com">user1(a)ad.xyz.com</a>" \<br>&nbsp= ;         -H "PASSWORD: Pwssd" \<br>    &nbsp= ;     -H "TARGET: kobe" \<br>          <= a href=3D"https://vm0.smalick.com/api/hosts" target=3D"_blank">https://vm0.= smalick.com/api/hosts</a><br><br><br>I would like to add ID, PASSWORD and T= ARGET as HTTP request header. <br><br>Thanks,<br>Salifou<br><br><br><br></d= iv> </div> </div> </div></div></body></html> ------=_Part_1975902_834617789.1445161505459--

2 1

[Users] oVirt Weekly Sync Meeting Minutes -- 2012-05-23
by Mike Burns 15 May '19

15 May '19

Minutes: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.html Minutes (text): http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.txt Log: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html ========================= #ovirt: oVirt Weekly Sync ========================= Meeting started by mburns at 14:00:23 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html . Meeting summary --------------- * agenda and roll call (mburns, 14:00:41) * Status of next release (mburns, 14:05:17) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822145 (mburns, 14:05:29) * AGREED: freeze date and beta release delayed by 1 week to 2012-06-07 (mburns, 14:12:33) * post freeze, release notes flag needs to be used where required (mburns, 14:14:21) * https://bugzilla.redhat.com/show_bug.cgi?id=821867 is a VDSM blocker for 3.1 (oschreib, 14:17:27) * ACTION: dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas (oschreib, 14:21:44) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822158 (mburns, 14:23:39) * assignee not available, update to come tomorrow (mburns, 14:24:59) * ACTION: oschreib to make sure BZ#822158 is handled quickly (oschreib, 14:25:29) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824397 (mburns, 14:28:55) * 824397 expected to be merged prior next week's meeting (mburns, 14:29:45) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824420 (mburns, 14:30:15) * tracker for node based on F17 (mburns, 14:30:28) * blocked by util-linux bug currently (mburns, 14:30:40) * new build expected from util-linux maintainer in next couple days (mburns, 14:30:55) * sub-project status -- engine (mburns, 14:32:49) * nothing to report outside of blockers discussed above (mburns, 14:34:00) * sub-project status -- vdsm (mburns, 14:34:09) * nothing outside of blockers above (mburns, 14:35:36) * sub-project status -- node (mburns, 14:35:43) * working on f17 migration, but blocked by util-linux bug (mburns, 14:35:58) * should be ready for freeze deadline (mburns, 14:36:23) * Review decision on Java 7 and Fedora jboss rpms in oVirt Engine (mburns, 14:36:43) * Java7 basically working (mburns, 14:37:19) * LINK: http://gerrit.ovirt.org/#change,4416 (oschreib, 14:39:35) * engine will make ack/nack statement next week (mburns, 14:39:49) * fedora jboss rpms patch is in review, short tests passed (mburns, 14:40:04) * engine ack on fedora jboss rpms and java7 needed next week (mburns, 14:44:47) * Upcoming Workshops (mburns, 14:45:11) * NetApp workshop set for Jan 22-24 2013 (mburns, 14:47:16) * already at half capacity for Workshop at LinuxCon Japan (mburns, 14:47:37) * please continue to promote it (mburns, 14:48:19) * proposal: board meeting to be held at all major workshops (mburns, 14:48:43) * LINK: http://www.ovirt.org/wiki/OVirt_Global_Workshops (mburns, 14:49:30) * Open Discussion (mburns, 14:50:12) * oVirt/Quantum integration discussion will be held separately (mburns, 14:50:43) Meeting ended at 14:52:47 UTC. Action Items ------------ * dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas * oschreib to make sure BZ#822158 is handled quickly Action Items, by person ----------------------- * dougsland * dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas * oschreib * oschreib to make sure BZ#822158 is handled quickly * **UNASSIGNED** * (none) People Present (lines said) --------------------------- * mburns (98) * oschreib (55) * doronf (12) * lh (11) * sgordon (8) * dougsland (8) * ovirtbot (6) * ofrenkel (4) * cestila (2) * RobertMdroid (2) * ydary (2) * rickyh (1) * yzaslavs (1) * cctrieloff (1) * mestery_ (1) * dustins (1) Generated by `MeetBot`_ 0.1.4 .. _`MeetBot`: http://wiki.debian.org/MeetBot

2 1

[QE][ACTION REQUIRED] oVirt 3.5.1 RC status - postponed
by Sandro Bonazzola 15 May '19

15 May '19

Hi, We have still blockers for oVirt 3.5.1 RC release so we need to postpone it until they'll be fixed. The bug tracker [1] shows 1 open blocker: Bug ID Whiteboard Status Summary 1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. - ACTION: Gilad please provide ETA on above blocker, the new proposed RC date will be decided on the given ETA. Maintainers: - Please be sure that 3.5 snapshot allow to create VMs - Please be sure that no pending patches are going to block the release - If any patch must block the RC release please raise the issue as soon as possible. There are still 57 bugs [2] targeted to 3.5.1. Excluding node and documentation bugs we still have 37 bugs [3] targeted to 3.5.1. Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed. - ACTION: Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1: it will ease gathering the blocking bugs for next releases. - ACTION: Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr [4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

2 1

VM has paused due to no storage space error
by Sandvik Agustin 15 May '19

15 May '19

Hi users, I have this problem that sometimes 1 to 3 VM just automatically paused with user interaction and getting this error "VM has paused due to no storage space error". any inputs from you guys are very appreciated. TIA Sandvik

5 5

VM Import from remote libvirt Server on web gui with Host key verification failed or permission denied error
by Rogério Ceni Coelho 15 May '19

15 May '19

Hi Ovirt Jedi´s !!! First of all, congratulations for this amazing product. I am an Vmware and Hyper-V Engineer but i am very excited with oVirt. Now, let´s go to work ... :-) I am trying to Import vm from remote libvirt server on web gui but i was unable to solve the problem until now. [image: pasted1] Node logs : [root@hlg-rbs-ovirt-kvm01-poa ~]# tail -f /var/log/vdsm/vdsm.log | grep -i error | grep -v Host.getStats jsonrpc.Executor/0::ERROR::2016-10-06 10:24:52,432::v2v::151::root::(get_external_vms) error connection to hypervisor: 'Cannot recv data: Permission denied, please try again.\r\nPermission denied, please try again.\r\nPermission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer' jsonrpc.Executor/0::INFO::2016-10-06 10:24:52,433::__init__::513::jsonrpc.JsonRpcServer::(_serveRequest) RPC call Host.getExternalVMs failed (error 65) in 10.05 seconds [root@hlg-rbs-ovirt-kvm02-poa ~]# grep error /var/log/vdsm/vdsm.log | grep get_external_vms jsonrpc.Executor/7::ERROR::2016-10-06 10:25:37,344::v2v::151::root::(get_external_vms) error connection to hypervisor: 'Cannot recv data: Host key verification failed.: Connection reset by peer' [root@hlg-rbs-ovirt-kvm02-poa ~]# Engine Logs : [root@hlg-rbs-ovirt01-poa ~]# tail -f /var/log/ovirt-engine/engine.log 2016-10-06 10:24:42,377 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] START, GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm01-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='5feddfba-d7b2-423e-a946-ac2bf36906fa', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'}), log id: eb750c7 *2016-10-06 10:24:53,435 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again.* *Permission denied, please try again.* *Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer]* 2016-10-06 10:24:53,435 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Failed in 'GetVmsFromExternalProviderVDS' method 2016-10-06 10:24:53,435 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer] 2016-10-06 10:24:53,454 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-97) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM hlg-rbs-ovirt-kvm01-poa.rbs.com.br command failed: Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer 2016-10-06 10:24:53,454 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@6c6f696c' 2016-10-06 10:24:53,454 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] HostName = hlg-rbs-ovirt-kvm01-poa.rbs.com.br 2016-10-06 10:24:53,454 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Command 'GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm01-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='5feddfba-d7b2-423e-a946-ac2bf36906fa', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'})' execution failed: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 2016-10-06 10:24:53,454 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id: eb750c7 2016-10-06 10:24:53,459 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-97) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: Failed to retrieve VMs information from external server qemu+ssh://root@prd-openshift-kvm03-poa.rbs.com.br/system 2016-10-06 10:24:53,459 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-97) [] Query 'GetVmsFromExternalProviderQuery' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) 2016-10-06 10:24:53,460 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-97) [] Exception: org.ovirt.engine.core.common.errors.EngineException: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103) [bll.jar:] at org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33) [dal.jar:] at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529) [bll.jar:] at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13) [bll.jar:] at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) [weld-core-impl-2.3.2.Final.jar:2.3.2.Final] at org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45) [wildfly-ee-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636) at org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195) at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73) at org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown Source) [common.jar:] at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53) at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196) at com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172) at com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233) at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129) at org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132) at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73) [branding.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84) at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62) at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36) at org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131) at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51) at io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46) at io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64) at io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56) at io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60) at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77) at io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50) at io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284) at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263) at io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81) at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174) at io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) at io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) [rt.jar:1.8.0_102] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) [rt.jar:1.8.0_102] at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102] 2016-10-06 10:25:27,202 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] START, GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm02-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='f9c9d929-b460-4102-bb29-de1e6ad6ad72', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'}), log id: 4f3174a6 *2016-10-06 10:25:38,338 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Host key verification failed.: Connection reset by peer]* 2016-10-06 10:25:38,338 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Failed in 'GetVmsFromExternalProviderVDS' method 2016-10-06 10:25:38,338 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Host key verification failed.: Connection reset by peer] 2016-10-06 10:25:38,343 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-113) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM hlg-rbs-ovirt-kvm02-poa.rbs.com.br command failed: Cannot recv data: Host key verification failed.: Connection reset by peer 2016-10-06 10:25:38,343 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@42dd60af' 2016-10-06 10:25:38,343 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] HostName = hlg-rbs-ovirt-kvm02-poa.rbs.com.br 2016-10-06 10:25:38,343 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Command 'GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm02-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='f9c9d929-b460-4102-bb29-de1e6ad6ad72', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'})' execution failed: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key verification failed.: Connection reset by peer, code = 65 2016-10-06 10:25:38,343 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id: 4f3174a6 2016-10-06 10:25:38,344 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-113) [] Query 'GetVmsFromExternalProviderQuery' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key verification failed.: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) 2016-10-06 10:25:38,345 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-113) [] Exception: org.ovirt.engine.core.common.errors.EngineException: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key verification failed.: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103) [bll.jar:] at org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33) [dal.jar:] at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529) [bll.jar:] at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13) [bll.jar:] at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) [weld-core-impl-2.3.2.Final.jar:2.3.2.Final] at org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45) [wildfly-ee-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636) at org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195) at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73) at org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown Source) [common.jar:] at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53) at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196) at com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172) at com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233) at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129) at org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132) at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73) [branding.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84) at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62) at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36) at org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131) at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51) at io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46) at io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64) at io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56) at io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60) at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77) at io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50) at io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284) at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263) at io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81) at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174) at io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) at io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) [rt.jar:1.8.0_102] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) [rt.jar:1.8.0_102] at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102] 2016-10-06 10:25:52,527 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] START, GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm03-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='02ead14e-0208-4a74-b1c2-4c19383820f9', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'}), log id: 7c8b1e2d 2016-10-06 10:26:02,695 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer] 2016-10-06 10:26:02,695 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Failed in 'GetVmsFromExternalProviderVDS' method 2016-10-06 10:26:02,696 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer] 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-118) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM hlg-rbs-ovirt-kvm03-poa.rbs.com.br command failed: Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer 2016-10-06 10:26:02,701 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@5ce9f7f2' 2016-10-06 10:26:02,701 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] HostName = hlg-rbs-ovirt-kvm03-poa.rbs.com.br 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Command 'GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm03-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='02ead14e-0208-4a74-b1c2-4c19383820f9', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'})' execution failed: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 2016-10-06 10:26:02,701 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id: 7c8b1e2d 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-118) [] Query 'GetVmsFromExternalProviderQuery' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-118) [] Exception: org.ovirt.engine.core.common.errors.EngineException: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103) [bll.jar:] at org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33) [dal.jar:] at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529) [bll.jar:] at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13) [bll.jar:] at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) [weld-core-impl-2.3.2.Final.jar:2.3.2.Final] at org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45) [wildfly-ee-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636) at org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195) at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73) at org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown Source) [common.jar:] at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53) at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196) at com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172) at com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233) at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129) at org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132) at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73) [branding.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84) at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62) at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36) at org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131) at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51) at io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46) at io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64) at io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56) at io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60) at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77) at io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50) at io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284) at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263) at io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81) at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174) at io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) at io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) [rt.jar:1.8.0_102] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) [rt.jar:1.8.0_102] at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102] ^C [root@hlg-rbs-ovirt01-poa ~]# When i try with virsh i have sucess. [root@hlg-rbs-ovirt-kvm01-poa ~]# virsh -c qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system The authenticity of host 'prd-openshift-kvm03-poa.rbs.com.br (10.1.8.32)' can't be established. ECDSA key fingerprint is af:e9:12:29:65:ad:41:ab:0a:3c:a1:f0:73:1c:62:a5. Are you sure you want to continue connecting (yes/no)? yes root(a)prd-openshift-kvm03-poa.rbs.com.br's password: Welcome to virsh, the virtualization interactive terminal. Type: 'help' for help with commands 'quit' to quit virsh # list Id Name State ---------------------------------------------------- 5 prd-openshift-etcd03-poa running 6 prd-openshift-master03-poa running 8 prd-openshift-node03-poa running virsh # list --all Id Name State ---------------------------------------------------- 5 prd-openshift-etcd03-poa running 6 prd-openshift-master03-poa running 8 prd-openshift-node03-poa running - teste shut off - teste1 shut off - tpl-centos72-64 shut off virsh # quit [root@hlg-rbs-ovirt-kvm01-poa ~]# Thanks.

3 2

Libvirt ERROR cannot access backing file after importing VM from OpenStack
by Vrgotic, Marko 15 May '19

15 May '19

Dear oVirt team, When trying to start imported VM, it fails with following message: ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-2) [] EVENT_ID: VM_DOWN_ERROR(119), VM instance-00000673 is down with error. Exit message: Cannot access backing file '/var/lib/nova/instances/_base/2f4f8c5fc11bb83bcab03f4c829ddda4da8c0bce' of storage file '/rhev/data-center/mnt/glusterSD/aws-gfs-01.awesome.lan:_gv0__he/2607c265-248c-40ad-b020-f3756454839e/images/816ac00f-ba98-4827-b5c8-42a8ba496089/8ecfcd5b-db67-4c23-9869-0e20d7553aba' (as uid:107, gid:107): No such file or directory. Platform details: Ovirt SHE Version 4.2.2.6-1.el7.centos GlusterFS, unmanaged by oVirt. VM is imported & converted from OpenStack, according to log files, successfully (one WARN, related to different MAC address): 2018-05-24 12:03:31,028+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsNamesFromExternalProviderVDSCommand] (default task-29) [cc5931a2-1af5-4d65-b0b3-362588db9d3f] FINISH, GetVmsNamesFromExternalProviderVDSCommand, return: [VM [instance-0001f94c], VM [instance-00078f6a], VM [instance-00000814], VM [instance-0001f9ac], VM [instance-000001ff], VM [instance-0001f718], VM [instance-00000673], VM [instance-0001ecf2], VM [instance-00078d38]], log id: 7f178a5e 2018-05-24 12:48:33,722+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsNamesFromExternalProviderVDSCommand] (default task-8) [103d56e1-7449-4853-ae50-48ee94d43d77] FINISH, GetVmsNamesFromExternalProviderVDSCommand, return: [VM [instance-0001f94c], VM [instance-00078f6a], VM [instance-00000814], VM [instance-0001f9ac], VM [instance-000001ff], VM [instance-0001f718], VM [instance-00000673], VM [instance-0001ecf2], VM [instance-00078d38]], log id: 3aa178c5 2018-05-24 12:48:47,291+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFullInfoFromExternalProviderVDSCommand] (default task-17) [4bf555c7-9d64-4ecc-b059-8a60a4b27bdd] START, GetVmsFullInfoFromExternalProviderVDSCommand(HostName = aws-ovhv-01, GetVmsFromExternalProviderParameters:{hostId='cbabe1e8-9e7f-4c4b-be9c-49154953564d', url='qemu+tcp://root@172.19.0.12/system', username='null', originType='KVM', namesOfVms='[instance-00000673]'}), log id: 4c445109 2018-05-24 12:48:47,318+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFullInfoFromExternalProviderVDSCommand] (default task-17) [4bf555c7-9d64-4ecc-b059-8a60a4b27bdd] FINISH, GetVmsFullInfoFromExternalProviderVDSCommand, return: [VM [instance-00000673]], log id: 4c445109 2018-05-24 12:49:20,466+02 INFO [org.ovirt.engine.core.bll.exportimport.ImportVmFromExternalProviderCommand] (default task-41) [14edb003-b4a0-4355-b3de-da2b68774fe3] Lock Acquired to object 'EngineLock:{exclusiveLocks='[instance-00000673=VM_NAME, 1f0b608f-7cfc-4b27-a876-b5d8073011a1=VM]', sharedLocks=''}' 2018-05-24 12:49:20,586+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653408) [14edb003-b4a0-4355-b3de-da2b68774fe3] EVENT_ID: MAC_ADDRESS_IS_EXTERNAL(925), VM instance-00000673 has MAC address(es) fa:16:3e:74:18:50, which is/are out of its MAC pool definitions. 2018-05-24 12:49:21,021+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653408) [14edb003-b4a0-4355-b3de-da2b68774fe3] EVENT_ID: IMPORTEXPORT_STARTING_IMPORT_VM(1,165), Starting to import Vm instance-00000673 to Data Center AVEUNL, Cluster AWSEUOPS 2018-05-24 12:49:28,816+02 INFO [org.ovirt.engine.core.bll.exportimport.ImportVmFromExternalProviderCommand] (EE-ManagedThreadFactory-engine-Thread-653407) [] Lock freed to object 'EngineLock:{exclusiveLocks='[instance-00000673=VM_NAME, 1f0b608f-7cfc-4b27-a876-b5d8073011a1=VM]', sharedLocks=''}' 2018-05-24 12:49:28,911+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ConvertVmVDSCommand] (EE-ManagedThreadFactory-commandCoordinator-Thread-2) [2047673e] START, ConvertVmVDSCommand(HostName = aws-ovhv-01, ConvertVmVDSParameters:{hostId='cbabe1e8-9e7f-4c4b-be9c-49154953564d', url='qemu+tcp://root@172.19.0.12/system', username='null', vmId='1f0b608f-7cfc-4b27-a876-b5d8073011a1', vmName='instance-00000673', storageDomainId='2607c265-248c-40ad-b020-f3756454839e', storagePoolId='5a5de92c-0120-0167-03cb-00000000038a', virtioIsoPath='null', compatVersion='null', Disk0='816ac00f-ba98-4827-b5c8-42a8ba496089'}), log id: 53408517 2018-05-24 12:49:29,010+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-commandCoordinator-Thread-2) [2047673e] EVENT_ID: IMPORTEXPORT_STARTING_CONVERT_VM(1,193), Starting to convert Vm instance-00000673 2018-05-24 12:52:57,982+02 INFO [org.ovirt.engine.core.bll.UpdateVmCommand] (default task-16) [df1d5f72-eb17-46e4-9946-20ca9809b54c] Failed to Acquire Lock to object 'EngineLock:{exclusiveLocks='[instance-00000673=VM_NAME]', sharedLocks='[1f0b608f-7cfc-4b27-a876-b5d8073011a1=VM]'}' 2018-05-24 12:59:24,575+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-20) [2047673e] EVENT_ID: IMPORTEXPORT_IMPORT_VM(1,152), Vm instance-00000673 was imported successfully to Data Center AVEUNL, Cluster AWSEUOPS Than trying to start VM fails with following messages: 2018-05-24 13:00:32,085+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653729) [] EVENT_ID: USER_STARTED_VM(153), VM instance-00000673 was started by admin@internal-authz (Host: aws-ovhv-06). 2018-05-24 13:00:33,417+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-9) [] VM '1f0b608f-7cfc-4b27-a876-b5d8073011a1'(instance-00000673) moved from 'WaitForLaunch' --> 'Down' 2018-05-24 13:00:33,436+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-9) [] EVENT_ID: VM_DOWN_ERROR(119), VM instance-00000673 is down with error. Exit message: Cannot access backing file '/var/lib/nova/instances/_base/2f4f8c5fc11bb83bcab03f4c829ddda4da8c0bce' of storage file '/rhev/data-center/mnt/glusterSD/aws-gfs-01.awesome.lan:_gv0__he/2607c265-248c-40ad-b020-f3756454839e/images/816ac00f-ba98-4827-b5c8-42a8ba496089/8ecfcd5b-db67-4c23-9869-0e20d7553aba' (as uid:107, gid:107): No such file or directory. 2018-05-24 13:00:33,437+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-9) [] add VM '1f0b608f-7cfc-4b27-a876-b5d8073011a1'(instance-00000673) to rerun treatment 2018-05-24 13:00:33,455+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653732) [] EVENT_ID: USER_INITIATED_RUN_VM_FAILED(151), Failed to run VM instance-00000673 on Host aws-ovhv-06. 2018-05-24 13:00:33,460+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653732) [] EVENT_ID: USER_FAILED_RUN_VM(54), Failed to run VM instance-00000673 (User: admin@internal-authz). Checking on the Gluster volume, directory and files exist, permissions are in order: [root@aws-ovhv-01 816ac00f-ba98-4827-b5c8-42a8ba496089] -rw-rw----. 1 vdsm kvm 14G May 24 12:59 8ecfcd5b-db67-4c23-9869-0e20d7553aba -rw-rw----. 1 vdsm kvm 1.0M May 24 12:49 8ecfcd5b-db67-4c23-9869-0e20d7553aba.lease -rw-r--r--. 1 vdsm kvm 310 May 24 12:49 8ecfcd5b-db67-4c23-9869-0e20d7553aba.meta Than I have checked image info, and noticed that backing file entry is pointing to non-existing location, which does and should not exist on oVirt hosts: [root@aws-ovhv-01 816ac00f-ba98-4827-b5c8-42a8ba496089]# qemu-img info 8ecfcd5b-db67-4c23-9869-0e20d7553aba image: 8ecfcd5b-db67-4c23-9869-0e20d7553aba file format: qcow2 virtual size: 160G (171798691840 bytes) disk size: 14G cluster_size: 65536 backing file: /var/lib/nova/instances/_base/2f4f8c5fc11bb83bcab03f4c829ddda4da8c0bce Format specific information: compat: 1.1 lazy refcounts: false refcount bits: 16 corrupt: false Can somebody advise me how to fix, address this, as I am in need of importing 200+ VMs from OpenStack to oVirt? Kindly awaiting your reply. Marko Vrgotic

7 36

Change host names/IPs
by Davide Ferrari 15 May '19

15 May '19

Hello Is there a clean way and possibly without downtime to change the hostname and IP addresses of all the hosts in a running oVirt cluster? -- Davide Ferrari Senior Systems Engineer

4 7

[Users] Lifecycle / upgradepath
by Sven Kieske 11 May '19

11 May '19

Hi Community, Currently, there is no single document describing supported (which means: working ) upgrade scenarios. I think the project has matured enough, to have such an supported upgradepath, which should be considered in the development of new releases. As far as I know, currently it is supported to upgrade from x.y.z to x.y.z+1 and from x.y.z to x.y+1.z but not from x.y-1.z to x.y+1.z directly. maybe this should be put together in a wiki page at least. also it would be cool to know how long a single "release" would be supported. In this context I would define a release as a version bump from x.y.z to x.y+1.z or to x+1.y.z a bump in z would be a bugfix release. The question is, how long will we get bugfix releases for a given version? What are your thoughts? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

2 1

[Users] Nested virtualization with Opteron 2nd generation and oVirt 3.1 possible?
by Gianluca Cecchi 11 May '19

11 May '19

Hello, I have 2 physical servers with Opteron 2nd gen cpu. There is CentOS 6.3 installed and some VM already configured on them. Their /proc/cpuinfo contains ... model name : Dual-Core AMD Opteron(tm) Processor 8222 ... kvm_amd kernel module is loaded with its default enabled nested option # systool -m kvm_amd -v Module = "kvm_amd" Attributes: initstate = "live" refcnt = "15" srcversion = "43D8067144E7D8B0D53D46E" Parameters: nested = "1" npt = "1" ... I already configured a fedora 17 VM as a oVirt 3.1 Engine I'm trying to configure another VM as oVirt 3.1 node with ovirt-node-iso-2.5.5-0.1.fc17.iso It seems I'm not able to configure so that ovirt install doesn't complain. After some attempts, I tried this in my vm.xml for the cpu: <cpu mode='custom' match='exact'> <model fallback='allow'>athlon</model> <vendor>AMD</vendor> <feature policy='require' name='pni'/> <feature policy='require' name='rdtscp'/> <feature policy='force' name='svm'/> <feature policy='require' name='clflush'/> <feature policy='require' name='syscall'/> <feature policy='require' name='lm'/> <feature policy='require' name='cr8legacy'/> <feature policy='require' name='ht'/> <feature policy='require' name='lahf_lm'/> <feature policy='require' name='fxsr_opt'/> <feature policy='require' name='cx16'/> <feature policy='require' name='extapic'/> <feature policy='require' name='mca'/> <feature policy='require' name='cmp_legacy'/> </cpu> Inside node /proc/cpuinfo becomes processor : 3 vendor_id : AuthenticAMD cpu family : 6 model : 2 model name : QEMU Virtual CPU version 0.12.1 stepping : 3 microcode : 0x1000065 cpu MHz : 3013.706 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall mmxext fxsr_opt lm nopl pni cx16 hypervisor lahf_lm cmp_legacy cr8_legacy bogomips : 6027.41 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: 2 questions: 1) Is there any combination in xml file to give to my VM so that oVirt doesn't complain about missing hardware virtualization with this processor? 2) suppose 1) is not possible in my case and I still want to test the interface and try some config operations to see for example the differences with RHEV 3.0, how can I do? At the moment this complaint about hw virtualization prevents me to activate the node. I get Installing Host f17ovn01. Step: RHEV_INSTALL. Host f17ovn01 was successfully approved. Host f17ovn01 running without virtualization hardware acceleration Detected new Host f17ovn01. Host state was set to Non Operational. Host f17ovn01 moved to Non-Operational state. Host f17ovn01 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags Can I lower the requirements to be able to operate without hw virtualization in 3.1? Thanks in advance, Gianluca

2 1

Need VM run once api
by Chandrahasa S 09 May '19

09 May '19

This is a multipart message in MIME format. --=_alternative 00361B2065257E90_= Content-Type: text/plain; charset="US-ASCII" Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00361B2065257E90_= Content-Type: text/html; charset="US-ASCII" <font size=2 face="sans-serif">Hi Experts,</font> <br> <br><font size=2 face="sans-serif">We are integrating ovirt with our internal cloud.</font> <br> <br><font size=2 face="sans-serif">Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS.</font> <br> <br><font size=2 face="sans-serif">but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal.</font> <br> <br><font size=2 face="sans-serif">I believe we need to power ON vm using run once API, but we are not able get this API.</font> <br> <br><font size=2 face="sans-serif">Can some one help on this.</font> <br> <br><font size=2 face="sans-serif">I got reply on this query last time but unfortunately mail got deleted.</font> <br> <br><font size=2 face="sans-serif">Thanks & Regards<br> Chandrahasa S<br> </font><p>=====-----=====-----=====<br> Notice: The information contained in this e-mail<br> message and/or attachments to it may contain <br> confidential or privileged information. If you are <br> not the intended recipient, any dissemination, use, <br> review, distribution, printing or copying of the <br> information contained in this e-mail message <br> and/or attachments to it are strictly prohibited. If <br> you have received this communication in error, <br> please notify us by reply e-mail or telephone and <br> immediately and permanently delete the message <br> and any attachments. Thank you</p> <p></p> --=_alternative 00361B2065257E90_=--

5 4

Ovirt Nested in VMWare (Working approach)
by RabidCicada 30 Apr '19

30 Apr '19

I worked through this previously and posted in IRC yesterday about working around running ovirt nested under VMWare. I figured i'd post it to the mail group so that it would be available in it's entirety here for future reference: The following gists explain the 3 major adjustments that have to be made currently to get nested virt under vmware working: https://gist.github.com/RabidCicada/993349b3a7eaf35637122f0122fdedb3 https://gist.github.com/RabidCicada/bc01eb0b13195faa26520c0fb666ec34 https://gist.github.com/RabidCicada/37ff6f1ed2afd8dd4edefac735536c69 https://gist.github.com/RabidCicada/40655db1582ca5d07c9bbf2c429cdd01 Hopefully it can save others the huge amount of time it took me to figure it all out. Specifically it's a problem with the --machine type at 3 major parts of the vm creation for the hosted-engine. 1) You have to fix the virt-install to use --machine pc-i440fx-rhel7.2.0 2) You have to fix the guestfish spinup of the partially configured vm to use --machine pc-i440fx-rhel7.2.0, where they edit the nic config among other things 3) You have to tell vdsm on the node to use --machine pc-i440fx-rhel7.2.0 I don't know the underlying reason why a --machine type > pc-i440fx-rhel7.2.0 breaks the system but it ends up resulting in a bios freeze. Again, Hope this helps someone. Suggested only to use for a test/dev system.

2 1

[Users] importing from kvm into ovirt
by Jonathan Horne 29 Apr '19

29 Apr '19

--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable I need to import a kvm virtual machine from a standalone kvm into my ovirt = cluster. Standalone is using local storage, and my ovirt cluster is using = iscsi. Can i please have some advice on whats the best way to get this sys= tem into ovirt? Right now i see it as copying the .img file to somewhere=85 but i have no i= dea where to start. I found this directory on one of my ovirt nodes: /rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/master/v= ms But inside is just directories that appear to have uuid-type of names, and = i can't tell what belongs to which vm. Any advice would be greatly appreciated. Thanks, jonathan ________________________________ This is a PRIVATE message. If you are not the intended recipient, please de= lete without copying and kindly advise us by e-mail of the mistake in deliv= ery. NOTE: Regardless of content, this e-mail shall not operate to bind SKO= POS to any order or other contract unless pursuant to explicit written agre= ement or government initiative expressly permitting the use of e-mail for s= uch purpose. --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/html; charset="Windows-1252" Content-ID: <41FAB2B157C43549B6577A3495BA255C(a)collaborationhost.net> Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1= 252"> </head> <body style=3D"word-wrap:break-word; color:rgb(0,0,0); font-size:14px; font= -family:Calibri,sans-serif"> <div> <div> <div>I need to import a kvm virtual machine from a standalone kvm into my o= virt cluster.  Standalone is using local storage, and my ovirt cluster= is using iscsi.  Can i please have some advice on whats the best way = to get this system into ovirt?</div> </div> </div> <div><br> </div> <div>Right now i see it as copying the .img file to somewhere=85 but i have= no idea where to start.  I found this directory on one of my ovirt no= des:</div> <div><br> </div> <div>/rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/mas= ter/vms</div> <div><br> </div> <div>But inside is just directories that appear to have uuid-type of names,= and i can't tell what belongs to which vm.</div> <div><br> </div> <div>Any advice would be greatly appreciated.</div> <div><br> </div> <div>Thanks,</div> <div>jonathan</div> <br> <hr> <font color=3D"Gray" face=3D"Arial" size=3D"1">This is a PRIVATE message. I= f you are not the intended recipient, please delete without copying and kin= dly advise us by e-mail of the mistake in delivery. NOTE: Regardless of con= tent, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit wri= tten agreement or government initiative expressly permitting the use of e-m= ail for such purpose.</font> </body> </html> --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_--

3 2

Trying to reset password for ovirt wiki
by noc 08 Apr '19

08 Apr '19

This is a multi-part message in MIME format. --------------000005070002050708050606 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hoping someone can help me out. For some reason I keep getting the following error when I try to reset my password: Reset password * Error sending mail: Failed to add recipient: jvandewege(a)nieuwland.nl [SMTP: Invalid response code received from server (code: 554, response: 5.7.1 <jvandewege(a)nieuwland.nl>: Relay access denied)] Complete this form to receive an e-mail reminder of your account details. Since I receive the ML on this address it is definitely a working address. Tried my home account too and same error but then for my home provider, Relay denied ?? A puzzled user, Joop --------------000005070002050708050606 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hoping someone can help me out.<br> For some reason I keep getting the following error when I try to reset my password:<br> <br> <fieldset><legend>Reset password</legend> <div class="error"> <ul> <li>Error sending mail: Failed to add recipient: <a class="moz-txt-link-abbreviated" href="mailto:jvandewege@nieuwland.nl">jvandewege(a)nieuwland.nl</a> [SMTP: Invalid response code received from server (code: 554, response: 5.7.1 <a class="moz-txt-link-rfc2396E" href="mailto:jvandewege@nieuwland.nl"><jvandewege(a)nieuwland.nl></a>: Relay access denied)]</li> </ul> </div> <p>Complete this form to receive an e-mail reminder of your account details.<br> </p> </fieldset> <br> Since I receive the ML on this address it is definitely a working address.<br> Tried my home account too and same error but then for my home provider, Relay denied ??<br> <br> A puzzled user,<br> <br> Joop<br> <br> </body> </html> --------------000005070002050708050606--

2 1

ovirt-guest-agent issue on rhel5.5
by John Michael Mercado 08 Apr '19

08 Apr '19

Hi All, I need your help. Anyone who encounter the below error and have the solution? Can you help me how to fix this? MainThread::INFO::2015-01-27 10:22:53,247::ovirt-guest-agent::57::root::Starting oVirt guest agent MainThread::ERROR::2015-01-27 10:22:53,248::ovirt-guest-agent::138::root::Unhandled exception in oVirt guest agent! Traceback (most recent call last): File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 132, in ? agent.run(daemon, pidfile) File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 63, in run self.agent = LinuxVdsAgent(config) File "/usr/share/ovirt-guest-agent/GuestAgentLinux2.py", line 371, in __init__ AgentLogicBase.__init__(self, config) File "/usr/share/ovirt-guest-agent/OVirtAgentLogic.py", line 171, in __init__ self.vio = VirtIoChannel(config.get("virtio", "device")) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 150, in __init__ self._stream = VirtIoStream(vport_name) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 131, in __init__ self._vport = os.open(vport_name, os.O_RDWR) OSError: [Errno 2] No such file or directory: '/dev/virtio-ports/com.redhat.rhevm.vdsm' Thanks

2 1

[Users] oVirt Workshop at LinuxCon Japan 2012
by Leslie Hawthorn 08 Apr '19

08 Apr '19

Hello everyone, As part of our efforts to raise awareness of and educate more developers about the oVirt project, we will be holding an oVirt workshop at LinuxCon Japan, taking place on June 8, 2012. You can find full details of the workshop agenda on the LinuxCon Japan site. [0] Registration for the workshop is now open and is free of charge for the first 50 participants. We will also look at adding additional participant slots to the workshop based on demand. Attendees who register for LinuxCon Japan via the workshop registration link [1] will also be eligible for a discount on their LinuxCon Japan registration. Please spread the word to folks you think would find the workshop useful. If they have already registered for LinuxCon Japan, they can simply edit their existing registration to include the workshop. [0] - https://events.linuxfoundation.org/events/linuxcon-japan/ovirt-gluster-work… [1] - http://www.regonline.com/Register/Checkin.aspx?EventID=1099949 Cheers, LH -- Leslie Hawthorn Community Action and Impact Open Source and Standards @ Red Hat identi.ca/lh twitter.com/lhawthorn

2 1

[Users] Moving iSCSI Master Data
by rni＠chef.net 07 Apr '19

07 Apr '19

--========GMXBoundary282021374122634158505 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Hi, it's me again.... I started my oVirt 'project' as a proof of concept,.. but it happend as always, it became production Now, I've to move the iSCSI Master data to the real iSCSI traget. Is there any way to do this, and to become rid of the old Master Data? Thank you for your help Hans-Joachim --========GMXBoundary282021374122634158505 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable <span style=3D'font-family:Verdana'><span style=3D'font-size:12px'>Hi,<br /= ><br />it's me again....<br /><br />I started my oVirt 'project' as a proof= of concept,.. but it happend as always, it became production <img alt= =3D" " title=3D" " src=3D"http://images.gmx.com/images/outsource/applicatio= n/mailclient/mailcom/resource/mailclient/icons/blue/emoticons/animated/S_02= -516742918.gif" /><br /><br />Now, I've to move the iSCSI Master data to th= e real iSCSI traget.<br />Is there any way to do this, and to become rid of= the old Master Data?<br /><br /><span id=3D"editor_signature">Thank you fo= r your help</span><br /><br />Hans-Joachim</span></span> --========GMXBoundary282021374122634158505--

3 2

[Users] Can't access RHEV-H aka ovirt-node
by Scotto Alberto 11 Mar '19

11 Mar '19

--_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: multipart/alternative; boundary="_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_" --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi all, I can't login to the hypervisor, neither as root nor as admin, neither from= another computer via ssh nor directly on the machine. I'm sure I remember the passwords. This is not the first time it happens: l= ast time I reinstalled the host. Everything worked ok for about 2 weeks, an= d then... What's going on? Is it a known behavior, somehow? Before rebooting the hypervisor, I would like to try something. RHEV Manage= r talks to RHEV-H without any problems. Can I login with RHEV-M's keys? how= ? Thank you all. Alberto Scotto [Blue] Via Cardinal Massaia, 83 10147 - Torino - ITALY phone: +39 011 29100 al.scotto(a)reply.it www.reply.it ________________________________ -- The information transmitted is intended for the person or entity to which i= t is addressed and may contain confidential and/or privileged material. Any= review, retransmission, dissemination or other use of, or taking of any ac= tion in reliance upon, this information by persons or entities other than t= he intended recipient is prohibited. If you received this in error, please = contact the sender and delete the material from any computer. --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <style>  </style> </head> <body lang=3D"IT" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> <p class=3D"MsoNormal"><span lang=3D"EN-US">Hi all,</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">I can’t login to the hype= rvisor, neither as root nor as admin, neither from another computer via ssh= nor directly on the machine.</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">I’m sure I remember the p= asswords. This is not the first time it happens: last time I reinstalled th= e host. Everything worked ok for about 2 weeks, and then...</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">What’s going on? Is it a = known behavior, somehow?</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">Before rebooting the hypervisor= , I would like to try something. RHEV Manager talks to RHEV-H without any p= roblems. Can I login with RHEV-M’s keys? how?</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US"> </span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">Thank you all.</span></p> </div> <br> <br> <div align=3D"left"> <p style=3D"font-family:Calibri,Sans-Serif; font-size:10pt"><span style=3D"= color:#000000; font-weight:bold">Alberto Scotto</span> <span style=3D"color:#808080"></span><br> <br> <span style=3D"color:#000000"><img border=3D"0" alt=3D"Blue" src=3D"cid:bde= 5ac62d10545908e269a6006dbd5ac" style=3D"margin:0px"> </span><br> <span style=3D"color:#808080">Via Cardinal Massaia, 83<br> 10147 - Torino - ITALY <br> phone: +39 011 29100 <br> <a href=3D"al.scotto(a)reply.it" target=3D"" style=3D"color:blue; text-decora= tion:underline">al.scotto(a)reply.it</a> <br> <a title=3D"" href=3D"www.reply.it" target=3D"" style=3D"color:blue; text-d= ecoration:underline">www.reply.it</a> </span><br>  </p> </div> <br> <hr> <font face=3D"Arial" color=3D"Gray" size=3D"1"><br> --<br> The information transmitted is intended for the person or entity to which i= t is addressed and may contain confidential and/or privileged material. Any= review, retransmission, dissemination or other use of, or taking of any ac= tion in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If= you received this in error, please contact the sender and delete the mater= ial from any computer.<br> </font> </body> </html> --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_-- --_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: image/png; name="blue.png" Content-Description: blue.png Content-Disposition: inline; filename="blue.png"; size=2834; creation-date="Tue, 11 Sep 2012 14:14:44 GMT"; modification-date="Tue, 11 Sep 2012 14:14:44 GMT" Content-ID: <bde5ac62d10545908e269a6006dbd5ac> Content-Transfer-Encoding: base64 iVBORw0KGgoAAAANSUhEUgAAAIwAAAAyCAYAAACOADM7AAAABmJLR0QA/gD+AP7rGNSCAAAACXBI WXMAAA3XAAAN1wFCKJt4AAAACXZwQWcAAACMAAAAMgCR0D3bAAAKaUlEQVR42u2ce5AUxRnAf313 3Al4eCAYFaIgyMNEUF6KlYoVIDBArDxqopWxQgViQlWsPHA0MUlZVoyKRsdSE4lGomjIaHS0UlHL wTIPpEgQFQUUjYIWdfIIScyBHi/Z6/zRM1xP3yzs7t3unOX8qra2H9M9vb3f9Pf19/WukFKSk1Mq dVkPIOejRS4wOWXR6wVGuP5I4foDsh5HjkL0VhtGuP5A4CFgNrAD+Lb0nKeyHtfHnd68wixGCQvA qcA9wvWPy3pQH3caan1D4fonAYeBDwEZjaFflAaok56zHRhsNG0B+gAHSrhHarn0nFp/3NLnxbKP B06I5kECO2UYZD2sLtRcYIBJwK+BoYBACU89cAjoAIRw/TuAJcClQGy//FJ6zvvH6ly4/qXAz4vU HQA2A4H0nIcz+OxH41eAHaU3AhdkPaA0MrFhhOuPB2YA5wBnA6ehni5dgKcBu4C5wLZS7Rfh+g8A 80u49HHgEuk5h2s+AeaYLbsO2AKMiIqWyzBYkPW40shihUF6zkbUUwSAcP0G4FHgS9pl10rPmQMs LbXfSBVNLPHyrwDfBO7JYg4MRqEempjnsh5QMXqL0Xsl8EUt3w5cXUE/w4AztfzzwGSUGrwoyuvM yfqDR5yLUssxL2U9oGJkssLoCNdfjLJXdBZIz9lQQXcTgSYt/4z0nHjy1wvX3wW8oNX3O8q4TgKm AGegjNB/As9JzzmYer1lTwKGoOyyV2UYtArLngLMQ9lh64EVRQxZ3V5pje4V9zsVGBRl22QYrDXu e0HUvwD+K8NgXbe/lKOQqcAI178MuM0ovk16zqMVdjnNyL9g5E2DrTVlTP1RRvM3gIFG9RvC9RdK z/lHoo2yQQJgeFR0hbDsT6FUns544Icp456qpV+RYaAL5RJgepR+FWXzxfcdA6zRrr0SqKrAZKaS hOt/DbjXKH5Geo7bjW71iT8AvGLUzzXyfzfGNBBlPyymq7AAjAWeFK5/slE+AvhklC4At6KEZb9x 3cJo+9x5T8s+ERinFa012uzU0vuMuu9r6W3AXd2Yu5LIRGCE618E/D6l6rpu9Hk8MEEr2iQ9p1Wr n4wShJgPgCeMbh6g02jeB9wILASe1q4ZBHzBaDeRThukHghRdskoQF+NmlH+JJ0JqB1ijCkw72np jiOfx7JPQrkdYm6QYXBMH1V3qYlKEq7fhNLvw1CTeztK55rcJlz/s8XshGPwaeBELd8sXP961Bd4 Bsqo1u2bm6Tn7NbGeCHKMI6ZLz3nsajuT6gtfjxfpxr31lXhThkG8470a9mrtPp2uq4652np94FN Rr0uMM1a+jI6fVTvAMsrmLOy6VGBEa5fB3wOpctHaK9TgVOAxmN0MRXlwPpWBbefYuTHAj8tcu39 0nNuMMq+qqXfjoUl4mSSq/HbRlv9S3/ZqBumpXcB/zPqz9fSm2UY/Nuo1wWmCUBYdiPwHa3ck2Hw YQVzVjbVWGFmkW7YmewDfga8CNwHnB6VXyZcf7X0nAfLvG8pntE3gSXSc5an1Olf+hDh+i+jVieJ UiOxwBSiMQMgLLsFOEtr+7xWB8rQjdkgw0BXK40o1RWTZrDu0dKx0X4xylMOynZZVuZcVUyPCoz0 nA7gR8L1N6FWmQIqZtRGpwoSwF7gRek5WwCE658P3A9Y0TV3C9ffUOrWOlrZdIfdXuBhlCqaqZU/ myYs0RZaNzybUV7oNFqBt7T8BJJ2iW6zDAPGFKkDGE1yBTLtF0gKTCF6/4FWtsTYVVWVqtgw0nNW lHn9LmCOcP2bgKuAvsAtqNWqFGLVF7NGes4i4fpjgNfpFNbzi7QfD/TX8vtQMa40VkvPKWh5fWfW DuhCfg5Ju8nc5k/RxpZYuTR0gWkTlj0D5YgEeJca2S4xvcXTC4D0nKvpdNWXc2hqEiqSHROrhR0k bYAzhesPTmmvG61tKAE6PXoNRRnTg6OX6VvRhfB1GQa7tbyu5v6D8qNQpH4bsDVlbLrADACu0fK/ qOXqAr1MYCLip7AcI+48I78WIIpuv6mVN5NUPWntN0nP2So9p016ThtwEKU6RpIMOyAsuw9JVWiu INO19AYZBma0fbKWXi/DoEBX9tBpu4wDLozS2+jqx6o6vVFgYt+JKKON/pTvJ6kWzKc6LTg5XEtv MeruAF5DqbZVgH6IayTJoOHf4oSw7LNICuKTeqfCsj9BUnhN+yamPXqZc3JrLfwuJpnHklKIBaa+ lIuF67eQ3KW8HtlEMabhPCmlG/3JnhX5ZHaifDeLtLqlxpmcySQfuvnCstdH6WXaZ9iPMsJ1xpOM ZaXZL6DsqfcB3UO8A7WzrDm9T2DqG7dTOHSIEgUGIc5GyhatZJ1Rv4HkmZ/xKb08o5UPRa0UkuQT vY6uQVJTFc5D7fQ6SNpUN8ow2GVcq7sB2ugq2DGHUYfLdG6SYbCPDMhcYIRlJwWjcGg/Z1/yATBE zJxXT0Pf4o0P7pWcO39W4nuVHS+JGfPq6dMXOjpgzNyt9En0MUF877fDee3x1iPlo2beTOPxnwGh qzahuhUAjwCLpOeYKkDfIT2BUl1XkxT2+2QYXJ8yen0H+JYMgz2kY9o126mh38UkITBRYGwp5e1Q usNjwL/Ql3VRX2D35mUI0UB90wyOZmc19i+wa+NB+vTrnMA9re00RO3q6iRbVtYxeOzt1NXHS3od e96dRkPT6CN9v/HUIRr738Dg0bMRDSdQVzeAjsJh+ra8SfMpf5S3XNzFoSYsewhJVbhKhoEnLDtE HV4vRGXPprQFFTdrRklk2u4opoVkyMOTYbCfjEgc0RSWPQhlQ/SruMfymCrD4IXud1N7In+ILgzT ZRj8tYfvcSLwOzoPer0DjKv1VlrHVEltqBhMafZD99mR1QfvAXT1tYfiNkhZCMvuD1yLCtbORsXg Yi7PUljAEJgoztFaYV8fN8yg4XsV95TkLJS32+QaGQZPl9tZT5O50ftRJLL1Pq8V9cjqEjHdyG8D rpdhkJmhq5MLTGX0QR2diLdnYQ/2vRq1wsRe6nUyDNq712XP0Wt/W53TO+mNoYGcXkwuMDll0eM2 TPRbnGnAvaaDSVj2bOA0GQY1j7Lm9AzVWGG+jIrwphlH3wXuzvpD51RONXZJ7aizLFcIyx4O3CXD IN527kUdJAJAWPbFqBXnVmHZV6FO3K+I6oahzgYPAX7T017UnMqoxgpTQAniONRJ/AeFZRc72+IA P47SPwEWAAjLbgL+jPJ1NAF/EZZd6o/sc6pINQSmARAyDL6OOm45mmSoX+cDVDiC6D0+azI0arcS FSkG9fcgORlTbcfdXtR5jqOdnpPGO3QK8nzU33KsoutvgXIyoBorjP7FN6OEsph3sE6rq9fS8RmQ RTIMTgP+QPJsbk5GVENgjgMQlv0QcDnwBp0nxgaQ/O+6dmCUsOxHUGdj459kbI/a3Sksew3qjE5L 1pOVUx2VtBJljxxAhf3v0v4TZRnKmI25ObruLdTZkvcAZBgcEpY9E3BRu6TrZBisznqycvJYUk6Z 5KGBnLLIBSanLHKBySmLXGByyiIXmJyy+D/P9uGVPOu6DAAAACh6VFh0U29mdHdhcmUAAHja801M LsrPTU3JTFRwyyxKLc8vyi5WsAAAYBUIJ4KDNosAAAAASUVORK5CYII= --_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_--

3 2

Unable to make Single Sign on working on Windows 7 Guest
by Felipe Herrera Martinez 11 Mar '19

11 Mar '19

On the case I'll be able to create an installer, what is the name of the Application need to be there, in order to ovirt detects that Ovirt Guest agent is installed? I have created an installer adding OvirtGuestService files and the Product Name to be shown, a part of the command line post installs.. I have tried with "ovirt-guest-agent" and "Ovirt guest agent" Names for the application installed on Windows 7 guest and even both are presented on ovirt VM Applications tab, on any case LogonVDScommand appears. There is other option to make it work now? Thanks in advance, Felipe

3 5

Re: [ovirt-users] Need VM run once api
by Chandrahasa S 11 Mar '19

11 Mar '19

This is a multipart message in MIME format. --=_alternative 00199D2865257E91_= Content-Type: text/plain; charset="US-ASCII" Can any one help on this. Thanks & Regards Chandrahasa S From: Chandrahasa S/MUM/TCS To: users(a)ovirt.org Date: 28-07-2015 15:20 Subject: Need VM run once api Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00199D2865257E91_= Content-Type: text/html; charset="US-ASCII" <font size=2 face="sans-serif">Can any one help on this.</font> <br> <br><font size=2 face="sans-serif">Thanks & Regards<br> Chandrahasa S<br> </font> <br> <br> <br> <br><font size=1 color=#5f5f5f face="sans-serif">From:        </font><font size=1 face="sans-serif">Chandrahasa S/MUM/TCS</font> <br><font size=1 color=#5f5f5f face="sans-serif">To:        </font><font size=1 face="sans-serif">users(a)ovirt.org</font> <br><font size=1 color=#5f5f5f face="sans-serif">Date:        </font><font size=1 face="sans-serif">28-07-2015 15:20</font> <br><font size=1 color=#5f5f5f face="sans-serif">Subject:        </font><font size=1 face="sans-serif">Need VM run once api</font> <br> <hr noshade> <br> <br><font size=2 face="sans-serif">Hi Experts,</font> <br> <br><font size=2 face="sans-serif">We are integrating ovirt with our internal cloud.</font> <br> <br><font size=2 face="sans-serif">Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS.</font> <br> <br><font size=2 face="sans-serif">but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal.</font> <br> <br><font size=2 face="sans-serif">I believe we need to power ON vm using run once API, but we are not able get this API.</font> <br> <br><font size=2 face="sans-serif">Can some one help on this.</font> <br> <br><font size=2 face="sans-serif">I got reply on this query last time but unfortunately mail got deleted.</font> <br> <br><font size=2 face="sans-serif">Thanks & Regards<br> Chandrahasa S<br> </font> <br><p>=====-----=====-----=====<br> Notice: The information contained in this e-mail<br> message and/or attachments to it may contain <br> confidential or privileged information. If you are <br> not the intended recipient, any dissemination, use, <br> review, distribution, printing or copying of the <br> information contained in this e-mail message <br> and/or attachments to it are strictly prohibited. If <br> you have received this communication in error, <br> please notify us by reply e-mail or telephone and <br> immediately and permanently delete the message <br> and any attachments. Thank you</p> <p></p> --=_alternative 00199D2865257E91_=--

3 3

Re: [ovirt-users] Problem Windows guests start in pause
by Dafna Ron 11 Mar '19

11 Mar '19

Hi Lucas, Please send mails to the list next time. can you please do rpm -qa |grep qemu. also, can you try a different windows image? Thanks, Dafna On 07/14/2014 02:03 PM, lucas castro wrote: > On the host there I've tried to run the vm, I use a centOS 6.5 > and checked, no update for qemu, libvirt or related package. -- Dafna Ron

3 3

Feature: Hosted engine VM management
by Roy Golan 27 Feb '19

27 Feb '19

Hi all, Upcoming in 3.6 is enhancement for managing the hosted engine VM. In short, we want to: * Allow editing the Hosted engine VM, storage domain, disks, networks etc * Have a shared configuration for the hosted engine VM * Have a backup for the hosted engine VM configuration please review and comment on the wiki below: http://www.ovirt.org/Hosted_engine_VM_management Thanks, Roy

2 3

Re: [ovirt-users] Large DWH Database, how to empty
by Matt . 26 Feb '19

26 Feb '19

Hi, OK thanks! I saw that after upgrading to 4.0.5 from 4.0.4 the DB already dropped with around 500MB directly and is now at 2GB smaller. Does this sounds familiar to you with other settings in 4.0.5 ? Thanks, Matt 2017-01-08 10:45 GMT+01:00 Shirly Radco <sradco(a)redhat.com>: > No. That will corrupt your database. > > Are you using the full dwh or the smaller version for the dashboards? > > Please set the delete thresholds to save less data and the data older then > the time you set will be deleted. > Add a file to /ovirt-engine-dwhd.conf.d/ > update_time_to_keep_records.conf > > Add these lines with the new configurations. The numbers represent the hours > to keep the data. > > DWH_TABLES_KEEP_SAMPLES=24 > DWH_TABLES_KEEP_HOURLY=1440 > DWH_TABLES_KEEP_DAILY=43800 > > > These are the configurations for a full dwh. > > The smaller version configurations are: > DWH_TABLES_KEEP_SAMPLES=24 > DWH_TABLES_KEEP_HOURLY=720 > DWH_TABLES_KEEP_DAILY=0 > > The delete process by default at 3am every day (DWH_DELETE_JOB_HOUR=3) > > Best regards, > > Shirly Radco > > BI Software Engineer > Red Hat Israel Ltd. > 34 Jerusalem Road > Building A, 4th floor > Ra'anana, Israel 4350109 > > > On Fri, Jan 6, 2017 at 6:35 PM, Matt . <yamakasi.014(a)gmail.com> wrote: >> >> Hi, >> >> I seem to have some large database for the DWH logging and I wonder >> how I can empty it safely. >> >> Can I just simply empty the database ? >> >> Have a good weekend! >> >> Cheers, >> >> Matt >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > >

1 0

Re: [ovirt-users] Packet loss
by Doron Fediuck 26 Feb '19

26 Feb '19

----_com.android.email_640187878761650 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: base64 SGkgS3lsZSzCoApXZSBtYXkgaGF2ZSBzZWVuIHNvbWV0aGluZyBzaW1pbGFyIGluIHRoZSBwYXN0 IGJ1dCBJIHRoaW5rIHRoZXJlIHdlcmUgdmxhbnMgaW52b2x2ZWQuwqAKSXMgaXQgdGhlIHNhbWUg Zm9yIHlvdT/CoApUb255IC8gRGFuLCBkb2VzIGl0IHJpbmcgYSBiZWxsP8Kg ----_com.android.email_640187878761650 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: base64 PGh0bWw+PGhlYWQ+PG1ldGEgaHR0cC1lcXVpdj0iQ29udGVudC1UeXBlIiBjb250ZW50PSJ0ZXh0 L2h0bWw7IGNoYXJzZXQ9VVRGLTgiPjwvaGVhZD48Ym9keSA+PGRpdj5IaSBLeWxlLCZuYnNwOzwv ZGl2PjxkaXY+V2UgbWF5IGhhdmUgc2VlbiBzb21ldGhpbmcgc2ltaWxhciBpbiB0aGUgcGFzdCBi dXQgSSB0aGluayB0aGVyZSB3ZXJlIHZsYW5zIGludm9sdmVkLiZuYnNwOzwvZGl2PjxkaXY+SXMg aXQgdGhlIHNhbWUgZm9yIHlvdT8mbmJzcDs8L2Rpdj48ZGl2PlRvbnkgLyBEYW4sIGRvZXMgaXQg cmluZyBhIGJlbGw/Jm5ic3A7PC9kaXY+PC9ib2R5PjwvaHRtbD4= ----_com.android.email_640187878761650--

2 1

Backup & Restore
by suporte＠logicworks.pt 27 Dec '18

27 Dec '18

------=_Part_20329569_1409874801.1519819859027 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Hi, I'm testing backup & restore on Ovirt 4.2. I follow this doc https://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration/ Try to restore to a fresh installation but always get this error message: restore-permissions Preparing to restore: - Unpacking file 'back_file' Restoring: - Files Provisioning PostgreSQL users/databases: - user 'engine', database 'engine' Restoring: FATAL: Can't connect to database 'ovirt_engine_history'. Please see '/usr/bin/engine-backup --help'. On the live engine I run # engine-backup --scope=all --mode=backup --file=file_name --log=log_file_name And try to restore on a fresh installation: # engine-backup --mode=restore --file=file_name --log=log_file_name --provision-db --restore-permissions Any Idea? Thanks -- Jose Ferradeira http://www.logicworks.pt ------=_Part_20329569_1409874801.1519819859027 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: trebuchet ms,sans-serif; font-size: = 12pt; color: #000000"><div data-marker=3D"__QUOTED_TEXT__"><div style=3D"fo= nt-family: Times New Roman; font-size: 10pt; color: #000000;" data-mce-styl= e=3D"font-family: Times New Roman; font-size: 10pt; color: #000000;"><div>H= i,<br></div><br><div><span style=3D"font-size: 11pt; font-family: terminal,= monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;= ">I'm testing backup & restore on Ovirt 4.2.</span><br></div><div><span= style=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style= =3D"font-size: 11pt; font-family: terminal, monaco;">I follow this doc http= s://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration/</sp= an><br></div><div><span style=3D"font-size: 11pt; font-family: terminal, mo= naco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;">T= ry to restore to a fresh installation but always get this error message:</s= pan><br></div><br><div><span style=3D"font-size: 11pt; font-family: termina= l, monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, monac= o;">restore-permissions</span><br><span style=3D"font-size: 11pt; font-fami= ly: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font-family: term= inal, monaco;">Preparing to restore:</span><br><span style=3D"font-size: 11= pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font= -family: terminal, monaco;">- Unpacking file 'back_file'</span><br><span st= yle=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"f= ont-size: 11pt; font-family: terminal, monaco;">Restoring:</span><br><span = style=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D= "font-size: 11pt; font-family: terminal, monaco;">- Files</span><br><span s= tyle=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"= font-size: 11pt; font-family: terminal, monaco;">Provisioning PostgreSQL us= ers/databases:</span><br><span style=3D"font-size: 11pt; font-family: termi= nal, monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, mon= aco;">- user 'engine', database 'engine'</span><br><span style=3D"font-size= : 11pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; = font-family: terminal, monaco;">Restoring:</span><br><span style=3D"font-si= ze: 11pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt= ; font-family: terminal, monaco;">FATAL: Can't connect to database 'ovirt_e= ngine_history'. Please see '/usr/bin/engine-backup --help'.</span><br></div= ><br><div><span style=3D"font-size: 11pt; font-family: terminal, monaco;" d= ata-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;">On the li= ve engine I run # engine-backup --scope=3Dall --mode=3Dbackup --file= =3Dfile_name --log=3Dlog_file_name</span></div><div><span style=3D"font-siz= e: 11pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt;= font-family: terminal, monaco;"><br data-mce-bogus=3D"1"></span></div><div= ><span style=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-s= tyle=3D"font-size: 11pt; font-family: terminal, monaco;">And try to restore= on a fresh installation:</span><br></div><div><span style=3D"font-size: 11= pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font= -family: terminal, monaco;"># engine-backup --mode=3Drestore --file=3Dfile_= name --log=3Dlog_file_name --provision-db --restore-permissions</span></div= ><div><span style=3D"font-size: 11pt; font-family: terminal, monaco;" data-= mce-style=3D"font-size: 11pt; font-family: terminal, monaco;"><br data-mce-= bogus=3D"1"></span></div><div><span style=3D"font-size: 11pt; font-family: = terminal, monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal= , monaco;">Any Idea?<br data-mce-bogus=3D"1"></span></div><div><span style= =3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"font= -size: 11pt; font-family: terminal, monaco;"><br data-mce-bogus=3D"1"></spa= n></div><div><span style=3D"font-size: 11pt; font-family: terminal, monaco;= " data-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;">Thanks= <br data-mce-bogus=3D"1"></span></div><div><span style=3D"font-size: 11pt; = font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font-fam= ily: terminal, monaco;"><br data-mce-bogus=3D"1"></span></div><div><span st= yle=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"f= ont-size: 11pt; font-family: terminal, monaco;"><br data-mce-bogus=3D"1"></= span></div><br><div>-- <br></div><div><hr style=3D"width: 100%; height: 2px= ;" data-mce-style=3D"width: 100%; height: 2px;">Jose Ferradeira<br>http://w= ww.logicworks.pt</div></div><br></div></div></body></html> ------=_Part_20329569_1409874801.1519819859027--

4 16

Out of sync, hosts network config differs from DC
by femi adegoke 02 Dec '18

02 Dec '18

Property: default route, host - true, DC - false I have 4 nics. bond0 = 2 x 10g eno1 = ovirtmgmt eno2 = for vm traffic. eno2 says it's out of sync, hosts network config differs from DC, default route: host - true, DC - false. I have tried "sync all networks" but the message still remains See attached. Where can I look to fix the issue?

3 2

oVirt Node on CentOS 7.5 and AMD EPYC Support
by Tobias Scheinert 30 Nov '18

30 Nov '18

Hi, I am currently building a new virtualization cluster with oVirt, using AMD EPYC processors (AMD EPYC 7351P). At the moment I'm running oVirt Node Version 4.2.3 @ CentOS 7.4.1708. We have the situation that the processor type is recognized as "AMD Opteron G3". With this type of instruction set the VMs are not able to do AES in hardware, this results in poor performance in our case. I found some information that tells me that this problem should be solved with CentOS 7.5 --> <https://access.redhat.com/errata/RHEA-2018:1488> My actual questions: - Are there any further information about the AMD EPYC support? - Any information about an update of the oVirt node to CentOS 7.5? Greeting Tobias

7 10

Error installing ovirt node
by Junaid Jadoon 20 Sep '18

20 Sep '18

Dear All, I have Ovirt engine 4.2 and node version is 4.2. After installing node in in ovirt engine when i try to install node it gives following error 14:25:37,410+05 ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] (EE-ManagedThreadFactory-engine-Thread-19) [52669850] Host installation failed for host 'bd8d007a-be92-4075-bba9-6cbeb890a1e5', 'node_2': Command returned failure code 1 during SSH session 'root(a)192.168.20.20' 2018-02-27 14:25:37,416+05 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] (EE-ManagedThreadFactory-engine-Thread-19) [52669850] START, SetVdsStatusVDSCommand(HostName = node_2, SetVdsStatusVDSCommandParameters:{hostId='bd8d007a-be92-4075-bba9-6cbeb890a1e5', status='InstallFailed', nonOperationalReason='NONE', stopSpmFailureLogged='false', maintenanceReason='null'}), log id: 2b138e87 2018-02-27 14:25:37,423+05 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] (EE-ManagedThreadFactory-engine-Thread-19) [52669850] FINISH, SetVdsStatusVDSCommand, log id: 2b138e87 2018-02-27 14:25:37,429+05 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-19) [52669850] EVENT_ID: VDS_INSTALL_FAILED(505), Host node_2 installation failed. Command returned failure code 1 during SSH session 'root(a)192.168.20.20'. 2018-02-27 14:25:37,433+05 INFO [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] (EE-ManagedThreadFactory-engine-Thread-19) [52669850] Lock freed to object 'EngineLock:{exclusiveLocks='[bd8d007a-be92-4075-bba9-6cbeb890a1e5=VDS]', sharedLocks=''}' I have attached log file for your reference Please help me out.

3 8

Failed to synchronize networks of Provider ovirt-provider-ovn
by Kapetanakis Giannis 14 Sep '18

14 Sep '18

Hi, After upgrading to 4.2.1 I have problems with ovn provider. I'm getting "Failed to synchronize networks of Provider ovirt-provider-ovn." I use custom SSL certificate in apache and I guess this is the reason. I've tried to update ovirt-provider-ovn.conf with [OVIRT] #ovirt-ca-file=/etc/pki/ovirt-engine/ca.pem ovirt-ca-file=/etc/pki/ovirt-engine/apache-ca.pem but still no go Any tips on this? thanks G

4 11

Install oVirt node without Internet repository
by G, Maghesh Kumar (Nokia - IN/Bangalore) 13 Sep '18

13 Sep '18

--_000_HE1PR0702MB3532EC34365D995765A2B7D783A60HE1PR0702MB3532_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi Description of problem: Cannot add host - install fails & Install oVirt node without Internet repos= itory Version: Ovirt-4.2 Host is installed with RHEL 7.4 Actual results: Host KVM02 installation failed. Command returned failure code 1 during SSH = session 'root(a)192.175.2.231<mailto:root@192.175.2.231>' I found that right now on my oVirt Nodes in my test environment does not NO= T connect to the internet... Basically, i need the offline repository to access from oVirt nodes without= Internet access. Please guide us how to proceed Regards, Maghesh --_000_HE1PR0702MB3532EC34365D995765A2B7D783A60HE1PR0702MB3532_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-IN" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">Hi<o:p></o:p></span= ></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <pre><span style=3D"font-size:12.0pt;color:black">Description of problem:<o= :p></o:p></span></pre> <pre><span style=3D"font-size:12.0pt;color:black">Cannot add host - install= fails & Install oVirt node without Internet repository<o:p></o:p></spa= n></pre> <pre><span style=3D"font-size:12.0pt;color:black"><o:p> </o:p></span><= /pre> <pre><span style=3D"font-size:12.0pt;color:black">Version: Ovirt-4.2<o:p></= o:p></span></pre> <pre><span style=3D"font-size:12.0pt;color:black">Host is installed with RH= EL 7.4<o:p></o:p></span></pre> <pre><span style=3D"font-size:12.0pt;color:black"><o:p> </o:p></span><= /pre> <pre><span style=3D"font-size:12.0pt;color:black">Actual results:<o:p></o:p= ></span></pre> <pre><span style=3D"font-size:12.0pt;color:black">Host KVM02 installation f= ailed. Command returned failure code 1 during SSH session '<a href=3D"mailt= o:root@192.175.2.231"><span style=3D"color:#6699CC">root(a)192.175.2.231</spa= n></a>'<o:p></o:p></span></pre> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">I found that right = now on my oVirt Nodes in my test environment <b>does not NOT connect to the internet.</b>.. <o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">Basically, i need t= he offline repository to access from oVirt nodes without Internet access.<o= :p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN"><o:p> </o:p></= span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">Please guide us how= to proceed<o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN"><o:p> </o:p></= span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">Regards,<o:p></o:p>= </span></p> <p class=3D"MsoNormal"><span style=3D"font-size:12.0pt;font-family:"Co= urier New";color:black;mso-fareast-language:EN-IN">Maghesh<o:p></o:p><= /span></p> <p class=3D"MsoNormal"><o:p> </o:p></p> </div> </body> </html> --_000_HE1PR0702MB3532EC34365D995765A2B7D783A60HE1PR0702MB3532_--

3 7

Re: External ceph storage
by Luca 'remix_tj' Lorenzetto 27 Aug '18

27 Aug '18

No, The only way you have is to configure cinder to manage ceph pool or in alternative you have to deploy an iscsi gateway, no other ways are available at the moment. So you can't use rbd directly. Luca Il dom 27 mag 2018, 16:54 Leo David <leoalex(a)gmail.com> ha scritto: > Thank you Luca, > At the moment i would try the cinder storage provider, since we already > have a proxmox cluster directly connecting to ceph. The problem is that I > just could not find a straight way to do this. > ie: Specify the ceph monitors and ceph pool to connect to. Can oVirt > directly connect to ceph monitors ? How the configuration should be done if > so ? > Thank you very much ! > > > On Sun, May 27, 2018, 17:20 Luca 'remix_tj' Lorenzetto < > lorenzetto.luca(a)gmail.com> wrote: > >> Hello, >> >> Yes, using cinder or through iscsi gateway. >> >> For a simpler setup i suggest the second option. >> >> Luca >> >> Il dom 27 mag 2018, 16:08 Leo David <leoalex(a)gmail.com> ha scritto: >> >>> Hello everyone, >>> I am new to ovirt and very impressed of its features. I would like to >>> levereage on our existing ceph cluster to provide rbd images for vm hdds, >>> is this possible to achieve ? >>> Thank you very much ! >>> Regards, >>> Leo >>> _______________________________________________ >>> Users mailing list -- users(a)ovirt.org >>> To unsubscribe send an email to users-leave(a)ovirt.org >>> >>

3 3

Fwd: Re: Single node single node SelfHosted Hyperconverged
by Leo David 22 Aug '18

22 Aug '18

---------- Forwarded message ---------- From: Leo David <leoalex(a)gmail.com> Date: Tue, Jun 12, 2018 at 7:57 PM Subject: Re: [ovirt-users] Re: Single node single node SelfHosted Hyperconverged To: femi adegoke <ovirt(a)fateknollogee.com> Thank you very much for you response, now it feels I can barelly see the light ! So: multipath -ll 3614187705c01820022b002b00c52f72e dm-1 DELL ,PERC H730P Mini size=931G features='1 queue_if_no_path' hwhandler='0' wp=rw `-+- policy='service-time 0' prio=1 status=active `- 0:2:0:0 sda 8:0 active ready running lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 931G 0 disk ├─sda1 8:1 0 1G 0 part ├─sda2 8:2 0 930G 0 part └─3614187705c01820022b002b00c52f72e 253:1 0 931G 0 mpath ├─3614187705c01820022b002b00c52f72e1 253:3 0 1G 0 part /boot └─3614187705c01820022b002b00c52f72e2 253:4 0 930G 0 part ├─onn-pool00_tmeta 253:6 0 1G 0 lvm │ └─onn-pool00-tpool 253:8 0 825.2G 0 lvm │ ├─onn-ovirt--node--ng--4.2.3.1--0.20180530.0+1 253:9 0 798.2G 0 lvm / │ ├─onn-pool00 253:12 0 825.2G 0 lvm │ ├─onn-var_log_audit 253:13 0 2G 0 lvm /var/log/audit │ ├─onn-var_log 253:14 0 8G 0 lvm /var/log │ ├─onn-var 253:15 0 15G 0 lvm /var │ ├─onn-tmp 253:16 0 1G 0 lvm /tmp │ ├─onn-home 253:17 0 1G 0 lvm /home │ └─onn-var_crash 253:20 0 10G 0 lvm /var/crash ├─onn-pool00_tdata 253:7 0 825.2G 0 lvm │ └─onn-pool00-tpool 253:8 0 825.2G 0 lvm │ ├─onn-ovirt--node--ng--4.2.3.1--0.20180530.0+1 253:9 0 798.2G 0 lvm / │ ├─onn-pool00 253:12 0 825.2G 0 lvm │ ├─onn-var_log_audit 253:13 0 2G 0 lvm /var/log/audit │ ├─onn-var_log 253:14 0 8G 0 lvm /var/log │ ├─onn-var 253:15 0 15G 0 lvm /var │ ├─onn-tmp 253:16 0 1G 0 lvm /tmp │ ├─onn-home 253:17 0 1G 0 lvm /home │ └─onn-var_crash 253:20 0 10G 0 lvm /var/crash └─onn-swap 253:10 0 4G 0 lvm [SWAP] sdb 8:16 0 931G 0 disk └─sdb1 8:17 0 931G 0 part sdc 8:32 0 4.6T 0 disk └─sdc1 8:33 0 4.6T 0 part nvme0n1 259:0 0 1.1T 0 disk So the multipath "3614187705c01820022b002b00c52f72e" that was shown in the error is actually the root filesystem, which was created at node installation ( from iso ). Is this mpath ok that is activated on sda ? What should I do in this situation ? Thank you ? On Tue, Jun 12, 2018 at 5:38 PM, femi adegoke <ovirt(a)fateknollogee.com> wrote: > Are your disks "multipathing"? > > What's your output if you run the command multipath -ll > > For comparison sake, here is my gdeploy.conf (used for a single host > gluster install) - lv1 was changed to 62gb > **Credit for that pastebin to Squeakz on the IRC channel > https://pastebin.com/LTRQ78aJ > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/communit > y/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archiv > es/list/users(a)ovirt.org/message/EEIE4PWUFCXHHTT6PGP2EPFQXIWL6H5P/ > -- Best regards, Leo David -- Best regards, Leo David

3 16

vacuumdb: could not connect to database ovirt_engine_history
by emanuel.santosvarina＠mahle.com 22 Aug '18

22 Aug '18

..trying to update from 4.2.3 to 4.2.4 engine-setup fails with the following error: --snip 2018-06-28 16:26:45,507+0200 DEBUG otopi.plugins.ovirt_engine_setup.ovirt_engine_dwh.db.vacuum plugin.execute:926 execute-output: ['/usr/share/ovirt-engine-dwh/bin/dwh-vacuum.sh', '-f', '-v'] stderr: vacuumdb: could not connect to database ovirt_engine_history: FATAL: password authentication failed for user "ovirt_engine_history" 2018-06-28 16:26:45,507+0200 DEBUG otopi.context context._executeMethod:143 method exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/context.py", line 133, in _executeMethod method['method']() File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-setup/ovirt-engine-dwh/db/vacuum.py", line 126, in _vacuum self.execute(args=args) File "/usr/lib/python2.7/site-packages/otopi/plugin.py", line 931, in execute command=args[0], RuntimeError: Command '/usr/share/ovirt-engine-dwh/bin/dwh-vacuum.sh' failed to execute 2018-06-28 16:26:45,508+0200 ERROR otopi.context context._executeMethod:152 Failed to execute stage 'Misc configuration': Command '/usr/share/ovirt-engine-dwh/bin/dwh-vacuum.sh' failed to execute 2018-06-28 16:26:45,508+0200 DEBUG otopi.transaction transaction.abort:119 aborting 'Yum Transaction' --snap Any ideas? Thank You, Ema

5 8

Network issues with oVirt 4.2 and cloud-init
by Berger, Sandy 17 Aug '18

17 Aug '18

--_000_DM5PR05MB316161E1C7E2EB8EA09A76A0D5D40DM5PR05MB3161namp_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable We're using cloud-init to customize VMs built from a template. We're using = static IPV4 settings so we're specifying an IP address, subnet mask, and ga= teway. There is apparently a bug in the current version of cloud-init shipp= ing as part of CentOS 7.4 (https://bugzilla.redhat.com/show_bug.cgi?id=3D14= 92726) that fails to set the gateway properly. In the description of the bu= g, it says it is fixed in RHEL 7.5 but also says one can use https://people= .redhat.com/rmccabe/cloud-init/cloud-init-0.7.9-20.el7.x86_64.rpm which is = what we're doing. When the new VM first boots, the 3 IPv4 settings are all set correctly. Reb= oots of the VM maintain the settings properly. But, if the VM is shut down = and started again via the oVirt GUI, all of the IPV4 settings on the eth0 v= irtual NIC are lost and the /etc/sysconfig/network-scripts/ifcfg-eth0 shows= that the NIC is now set up for DHCP. Are we doing something incorrectly? Sandy Berger IT - Infrastructure Engineer II Quad/Graphics Performance through Innovation Sussex, Wisconsin 414.566.2123 phone 414.566.4010/2123 pager/PIN sandy.berger(a)qg.com<mailto:sandy.berger@qg.com> www.QG.com<http://www.qg.com/> Follow Us: Facebook<http://www.qg.com/social1> | Twitter<http://www.qg.com/= social2> | LinkedIn<http://www.qg.com/social3> | YouTube<http://www.qg.com/= social4> --_000_DM5PR05MB316161E1C7E2EB8EA09A76A0D5D40DM5PR05MB3161namp_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> <p class=3D"MsoNormal">We’re using cloud-init to customize VMs built = from a template. We’re using static IPV4 settings so we’re spec= ifying an IP address, subnet mask, and gateway. There is apparently a bug i= n the current version of cloud-init shipping as part of CentOS 7.4 (<a href=3D"https://bugzilla.redhat.com/show_bug.cgi?id=3D14= 92726">https://bugzilla.redhat.com/show_bug.cgi?id=3D1492726</a>) that fail= s to set the gateway properly. In the description of the bug, it says it is= fixed in RHEL 7.5 but also says one can use <a href=3D"https://people.redhat.com/rmccabe/cloud-init/cloud-init-0.7= .9-20.el7.x86_64.rpm"> https://people.redhat.com/rmccabe/cloud-init/cloud-init-0.7.9-20.el7.x86_64= .rpm</a> which is what we’re doing.<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">When the new VM first boots, the 3 IPv4 settings are= all set correctly. Reboots of the VM maintain the settings properly. But, = if the VM is shut down and started again via the oVirt GUI, all of the IPV4= settings on the eth0 virtual NIC are lost and the /etc/sysconfig/network-scripts/ifcfg-eth0 shows that the = NIC is now set up for DHCP.<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">Are we doing something incorrectly?<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal"><b><span style=3D"font-size:10.0pt;font-family:&quot= ;Arial",sans-serif;color:#1E47A4">Sandy Berger </span></b><span style=3D"font-size:10.5pt;font-family:"Arial",sa= ns-serif;color:#444444"><o:p></o:p></span></p> <p class=3D"MsoNormal"><i><span style=3D"font-size:10.0pt;font-family:&quot= ;Arial",sans-serif;color:#434D5B">IT – Infrastructure Engineer I= I</span></i><span style=3D"font-size:10.5pt;font-family:"Arial",s= ans-serif;color:#444444"><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;font-family:"Ar= ial",sans-serif;color:#444444"> <o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial",sans-serif;color:#1E47A4">Quad/Graphics</span><span style=3D"font= -size:10.5pt;font-family:"Arial",sans-serif;color:#444444"><o:p><= /o:p></span></p> <p class=3D"MsoNormal"><i><span style=3D"font-size:8.0pt;font-family:"= Arial",sans-serif;color:#434D5B">Performance</span></i><span style=3D"= font-size:8.0pt;font-family:"Arial",sans-serif;color:#434D5B">&nb= sp;through </span><i><span style=3D"font-size:8.5pt;font-family:"= Arial",sans-serif;color:#434D5B">Innovation</span></i><span style=3D"f= ont-size:10.5pt;font-family:"Arial",sans-serif;color:#444444"><o:= p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;font-family:"Ar= ial",sans-serif;color:#434D5B"> </span><span style=3D"font-size:1= 0.5pt;font-family:"Arial",sans-serif;color:#444444"><o:p></o:p></= span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial",sans-serif;color:#434D5B">Sussex, Wisconsin</span><span style=3D"= font-size:10.5pt;font-family:"Arial",sans-serif;color:#444444"><o= :p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial",sans-serif;color:#434D5B">414.566.2123 phone</span><span style=3D= "font-size:10.5pt;font-family:"Arial",sans-serif;color:#444444"><= o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial",sans-serif;color:#434D5B">414.566.4010/2123 pager/PIN</span><span= style=3D"font-size:10.5pt;font-family:"Arial",sans-serif;color:#= 444444"><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.5pt;color:black"> <= /span><span style=3D"font-size:10.5pt;font-family:"Arial",sans-se= rif;color:#444444"><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-size:10.0pt;font-family:"Ar= ial",sans-serif;color:black"><a href=3D"mailto:sandy.berger@qg.com"><s= pan style=3D"color:blue">sandy.berger(a)qg.com</span></a></span><span style= =3D"font-size:10.5pt;font-family:"Arial",sans-serif;color:#444444= "><o:p></o:p></span></p> <p class=3D"MsoNormal"><span style=3D"font-family:"Arial",sans-se= rif;color:black"><a href=3D"http://www.qg.com/"><span style=3D"font-size:10= .0pt;color:blue">www.QG.com</span></a></span><span style=3D"font-size:10.5p= t;font-family:"Arial",sans-serif;color:#444444"><o:p></o:p></span= ></p> <p class=3D"MsoNormal"><o:p> </o:p></p> </div> Follow Us: <a href=3D"http://www.qg.com/social1">Facebook</a> | <a href=3D"= http://www.qg.com/social2"> Twitter</a> | <a href=3D"http://www.qg.com/social3">LinkedIn</a> | <a href= =3D"http://www.qg.com/social4"> YouTube</a> </body> </html> --_000_DM5PR05MB316161E1C7E2EB8EA09A76A0D5D40DM5PR05MB3161namp_--

4 5

Spice console pixelated noise on display changes
by Mitja Mihelič 28 Jul '18

28 Jul '18

Dear all, We are running the following setup: ovirt-engine host: - CentOS release 7.5.1804 - ovirt-engine-4.1.9.1-1.el7.centos.noarch - spice-html5-0.1.7-1.el7.noarch We have noticed problems with the Spice console. When it opens and displays the information presented by the VM's console it is OK at first. But as soon as any part of the display changes, that part gets replaced by random pixelated noise. For example I open the console of a standard CentOS server. When I type something at the login prompt the text is invisible and random pixels are displayed at the position of the blinking cursor. Please see attached screenshot spice-1-login_typing_and_cursor_waiting.png. Please also see other the attached screenshots. Login prompt after VM reboot: spice-2-login_after_boot.png Login prompt after hitting Enter a few times: spice-3-login_2x_enter.png We have tried and succesfully reproduced the issue on OSX (Chrome, FF, Safari) and Windows (Chrome, FF). VNC works fine. Why would this be happening? Help would be very much appreciated. Kind regards, Mitja -- Mitja Mihelič ARNES, Tehnološki park 18, p.p. 7, SI-1001 Ljubljana, Slovenia tel: +386 1 479 8877, fax: +386 1 479 88 7

3 6

trunked ports
by william.dossett＠gmail.com 27 Jul '18

27 Jul '18

Hi, I setup oVirt a few years back. now that the HCI is real, I am revisiting it. I have deployed with Gluster, and am now moving on to networking. I come from a VMware shop and normally we trunk all the network ports exposing all VLANs to the hosts and place VMs in Portgoups that are tagged with VLANs. I did manage to do this years back but I am struggling to get this to work today. I had pretty limited hardware back then and I thought I installed using vlan tagging and trunked ports, but I don't see any option to do this using the glusterfs and hosted engine setup. Each host has a dual port 10Gb NICs I use one for storage that is connected to my storage network and one for ovirtmgmt. (I need to add another of these for redundancy down the road, but no money for that at the moment) The hosts also have 4 x 1Gb ports. So in lieu of being able to configure vlan tagging to trunked ports on hosted engine deploy, I am considering cabling up a 1 Gb port on each in my management services VLAN and when it is all up and running create another logical network (or several of them as I think these equate to what is a vlan tagged port group in VMware) with the 10Gb NIC backing for VMs. Does that sound reasonable? Or if anyone can point me to any docs that describe how to deploy to a specific VLAN with trunk ports, that would be nice as well as I won't have to actually go to the office and run additional cables. Appreciate any advice Bill

3 3

metrics
by suporte＠logicworks.pt 24 Jul '18

24 Jul '18

Hi, I'm trying to configure oVirt metrics but when i run # ANSIBLE_LOG_PATH=/tmp/ansible.log ansible-playbook -vvv -e @/root/vars.yaml -i /root/ansible-inventory-origin-39-aio playbooks/deploy_cluster.yml i always get this error: Failure summary: 1. Hosts: localhost Play: Verify Requirements Task: Validate openshift_node_groups and openshift_node_group_name Message: last_checked_host: localhost, last_checked_var: openshift_node_group_name;openshift_node_group_name must be defined for all nodes What am I missing here? Thanks -- Jose Ferradeira http://www.logicworks.pt

3 14

Hang tasks delete snapshot
by Marcelo Leandro 23 Jul '18

23 Jul '18

Hello, The few days I tried delete snapshot but the task not concluded yet. How I can stop this task? I Already try with taskcleaner.sh but dont had sucess. attached the ovirt and vdsm-spm logs. ovirt version. 4.1.9 Thanks.

3 8

oVirt Metrics
by Shirly Radco 17 Jul '18

17 Jul '18

Dear users, I would love to get some feedback if someone has tried to install and use the oVirt metrics store, released in 4.2, for collecting metrics and logs, based on Elasticsearch, Kibana, Collectd and Fluentd on top of OpenShift. https://www.ovirt.org/develop/release-management/features/metrics/metrics-s… How did the installation go? Are you actively using it? And any other feedback would be much appreciated. Best regards, -- SHIRLY RADCO BI SeNIOR SOFTWARE ENGINEER Red Hat Israel <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

7 25

oVirt reports using Grafana
by Karli Sjöberg 15 Jul '18

15 Jul '18

Heya! I've been whishing for reports in oVirt ever since the old 'Jasper Reports' was removed. For an Enterprise, having pretty graphs to look at is a must. Searching the subject, I've found this[*] and have managed to get it installed OK but having issues trying to follow the guide setting it up. First of all, I think the guide should have at least mentioned that 'pg_hba.conf' needs to be edited for the read only user to be able to connect to the database, I scratched my head around that for a while before I got it. When I first type in the query example, I got syntax errors: 'pq: syntax error at or near "$"'. I continued anyways since I figured it would be solved at a later point, which turned out to be true, since the next step is to use the "Templating feature" to add variables. Unfortunately this doesn't go so well, even though I followed the instructions very carefully. After hitting save on the first variable I am rewarded with the error message: 'Template variables could not be initialized: pq: column "en_us" does not exist.' Are the queries stated in the guide still correct? This is for 'user_locale': "SELECT DISTINCT language_code from enum_translator" [*]:https://www.ovirt.org/blog/2018/01/ovirt-report-using-grafana/ TIA /K

5 8

hyperconverged cluster - how to change the mount path?
by Liebe, André-Sebastian 09 Jul '18

09 Jul '18

Hi list, I'm looking for an advice how to change the mount point of the hosted_storage due to a hostname change. When I set up our hyperconverged lab cluster (host1, host2, host3) I populated the mount path with host3:/hosted_storage which wasn't very clever as it brings in a single point of failure (i.e. when host3 is down). So I thought adding a round robin dns/hosts entry (i.e. gluster1) for host 1 to 3 and changing the mount path would be a better idea. But the mount path entry is locked in web gui and I couldn't find any hint how to change it manually (in database, shared and local configuration) in a consistent way without risking the cluster. So, is there a step by step guide how to achieve this without reinstalling (from backup)? Sincerely André-Sebastian Liebe Technik / Innovation gematik Gesellschaft für Telematikanwendungen der Gesundheitskarte mbH Friedrichstraße 136 10117 Berlin Telefon: +49 30 40041-197 Telefax: +49 30 40041-111 E-Mail: andre.liebe(a)gematik.de www.gematik.de ___________________________________________ Amtsgericht Berlin-Charlottenburg HRB 96351 B Geschäftsführer: Alexander Beyer

6 10

Changing resolution of console on Mint guest running on Ovirt 4.2
by pascal＠butterflyit.com 09 Jul '18

09 Jul '18

I keep getting an error: Could not set configuration for CRTC 63. I checked that I have spice-agent and spice-agentd running. Also qemu-guest-agent. lspci shows that I have a QXL adapter. xrandr -q shows that I have many different config available. but none work. What am I missing? Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192 Virtual-0 connected primary 1024x768+0+0 0mm x 0mm 1024x768 59.95*+ 1920x1200 59.95 1920x1080 60.00 1600x1200 59.95 1680x1050 60.00 1400x1050 60.00 1280x1024 59.95 1440x900 59.99 1280x960 59.99 1280x854 59.95 1280x800 59.96 1280x720 59.97 1152x768 59.95 800x600 59.96 848x480 59.94 720x480 59.94 640x480 59.94 Virtual-1 disconnected V

2 1

Re: PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils
by Greg Sheremeta 07 Jul '18

07 Jul '18

Is your engine functioning at all? I'm not sure if you're saying your entire engine doesn't work, or just host deploy doesn't work. What version of ovirt engine is this? How did you install -- fresh installation, upgrade? From source or rpm? Best wishes, Greg On Wed, Jun 20, 2018 at 12:35 AM Deekshith <deekshith(a)binaryindia.com> wrote: > Dear team > > Please find the attached server and host logs.. ovirt host > unresponsive(down), unable to install node packages. > > > > Regards > > Deekshith > > > > *From:* Roy Golan [mailto:rgolan@redhat.com] > *Sent:* 19 June 2018 06:57 > *To:* Greg Sheremeta > *Cc:* devel; users; deekshith(a)binaryindia.com; allen_john(a)mrpl.co.in > *Subject:* Re: [ovirt-users] PollVDSCommand Error: > java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils > > > > > > On Tue, 19 Jun 2018 at 16:04 Greg Sheremeta <gshereme(a)redhat.com> wrote: > > Sending to devel list. > > > > Anyone ever seen this before? It sounds like a bad installation if Java > classes are missing / classloader issues are present. > > > > 2018-06-18 11:23:11,287+05 INFO > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (VdsDeploy) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] EVENT_ID: > VDS_INSTALL_IN_PROGRESS(509), Correlation ID: > d6a2578b-c58f-43be-b6ad-30a3a0a57a74, Call Stack: null, Custom ID: null, > Custom Event ID: -1, Message: Installing Host Node. Retrieving installation > logs to: > '/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-20180618112311-mrpl.kvm2-d6a2578b-c58f-43be-b6ad-30a3a0a57a74.log'. > > 2018-06-18 11:23:12,131+05 INFO > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (VdsDeploy) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] EVENT_ID: > VDS_INSTALL_IN_PROGRESS(509), Correlation ID: > d6a2578b-c58f-43be-b6ad-30a3a0a57a74, Call Stack: null, Custom ID: null, > Custom Event ID: -1, Message: Installing Host Node. Stage: Termination. > > 2018-06-18 11:23:12,193+05 INFO > [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) > [] Connecting to mrpl.kvm2/172.31.1.32 > > 2018-06-18 11:23:12,206+05 ERROR > [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] > (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] > Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils > > 2018-06-18 11:23:12,206+05 ERROR > [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] > (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] > Command 'PollVDSCommand(HostName = Node, > VdsIdVDSCommandParametersBase:{runAsync='true', > hostId='d862d5c8-c75e-42ee-867f-ca16a228c2ad'})' execution failed: > java.util.concurrent.ExecutionException: java.lang.NoClassDefFoundError: > org/apache/commons/lang/StringUtils > > 2018-06-18 11:23:12,707+05 ERROR > [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] > (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] > Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils > > > > > > Is that a regular installation and what version? > > jdk version? > > server.log engine.log > > > > > > On Tue, Jun 19, 2018 at 8:50 AM Deekshith <deekshith(a)binaryindia.com> > wrote: > > Dear team > > Please find attached ovirt-engine log . > > > > Regards > > Deekshith > > > > *From:* Greg Sheremeta [mailto:gshereme@redhat.com] > *Sent:* 19 June 2018 05:53 > *To:* deekshith(a)binaryindia.com > *Cc:* users > *Subject:* Re: [ovirt-users] Unable to start Ovirt engine > > > > What does it say in the > /var/log/ovirt-engine/setup/ovirt-engine-setup-xxxxxx.log? > > > > On Sun, Jun 17, 2018 at 6:01 AM Deekshith <deekshith(a)binaryindia.com> > wrote: > > Hi Team > > Please anyone help me to solve this issue. > > > > > > *Error! Filename not specified.* > > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/QPBXKHLK4NSU6… > > > > > -- > > *GREG SHEREMETA* > > SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX > > Red Hat NA > > <https://www.redhat.com/> > > gshereme(a)redhat.com IRC: gshereme > > <https://red.ht/sig> > > > > > > > -- > > *GREG SHEREMETA* > > SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX > > Red Hat NA > > <https://www.redhat.com/> > > gshereme(a)redhat.com IRC: gshereme > > <https://red.ht/sig> > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/2AA4B5IPQL7O2… > > -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX Red Hat NA <https://www.redhat.com/> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig>

3 9

import OVA failed
by du_hongyu＠yeah.net 07 Jul '18

07 Jul '18

Hi my ovirt-engine version is 4.2.1, I import OVA by web UI, face some error, can you give me some advise? Regards Hongyu Du

2 1

Snapshots don't seem to work with Windows VMs
by jmp242＠cornell.edu 06 Jul '18

06 Jul '18

I've been testing with Windows 10 1607 LTSB and created several snapshots. I can preview each one, but they all boot with the same configuration and software installed and files as the "active VM" - so I cannot see at all how to roll back changes. Is this a known issue? I believe I'm following the documentation properly, but I can't see that the snapshots are doing anything. I'm testing on Scientific Linux 7.4 using oVirt 4.2.2.6-1.el7.centos.

2 1

ovirt-node: freshly installed node: network interfaces not visible
by etienne.charlier＠reduspaceservices.eu 06 Jul '18

06 Jul '18

Hello, I'm deploying a test cluster to get used to the ovirt product. My ovirt ( 4.2.2) engine is deployed in a vmware virtual machine. I'm busy deploying 5 hosts using the ovirt-node iso. I have issue with the additional physical network interface ( used for vm trafic and iSCSI) In ovirt manager I can't see the physical network interfaces. It's thus not possible to assign logical network to physical interfaces and my hosts stays in "non operational" status. How should I configure the additional interfaces in the ovirt-node installer to have them recognized ? I somehow managed to configure one host and I can see a comment line in /etc/sysconfig/network-script/ifcfg-... saying vdsm has acquired the interface.... No Such line in the ifcfg-* file in non operational hosts.... Any idea ? Etienne

3 4

When creating a virtual machine with a template, there are times when disk cannot be recognized
by Pym 05 Jul '18

05 Jul '18

Hi: I use environment is ovirt4.2.0, first, I created a template, the template has already installed in the operating system, and then I use this template to create a virtual machine, sometimes can't find the disk happens, particular case is shown in figure: At this point, the virtual machine attaches disk again and cannot be recognized. However, the disk above is identifiable to other virtual machines, and the contents of disk still exist I would like to ask what causes this problem.

3 5

oVirt 4.2.3 to 4.2.4 failed
by Matt Simonsen 05 Jul '18

05 Jul '18

Hello, I did yum updates on 2 of my oVirt 4.2.3 nodes running the prebuilt node platform and it doesn't appear the updates worked. [root@node6-g8-h4 ~]# yum update Loaded plugins: enabled_repos_upload, fastestmirror, imgbased-persist, : package_upload, product-id, search-disabled-repos, subscription- : manager This system is not registered with an entitlement server. You can use subscription-manager to register. Loading mirror speeds from cached hostfile * ovirt-4.2-epel: linux.mirrors.es.net Resolving Dependencies --> Running transaction check ---> Package ovirt-node-ng-image-update.noarch 0:4.2.3.1-1.el7 will be updated ---> Package ovirt-node-ng-image-update.noarch 0:4.2.4-1.el7 will be obsoleting ---> Package ovirt-node-ng-image-update-placeholder.noarch 0:4.2.3.1-1.el7 will be obsoleted --> Finished Dependency Resolution Dependencies Resolved ========================================================================================================================= Package Arch Version Repository Size ========================================================================================================================= Installing: ovirt-node-ng-image-update noarch 4.2.4-1.el7 ovirt-4.2 647 M replacing ovirt-node-ng-image-update-placeholder.noarch 4.2.3.1-1.el7 Transaction Summary ========================================================================================================================= Install 1 Package Total download size: 647 M Is this ok [y/d/N]: y Downloading packages: warning: /var/cache/yum/x86_64/7/ovirt-4.2/packages/ovirt-node-ng-image-update-4.2.4-1.el7.noarch.rpm: Header V4 RSA/SHA1 Signature, key ID fe590cb7: NOKEY Public key for ovirt-node-ng-image-update-4.2.4-1.el7.noarch.rpm is not installed ovirt-node-ng-image-update-4.2.4-1.el7.noarch.rpm | 647 MB 00:02:07 Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-ovirt-4.2 Importing GPG key 0xFE590CB7: Userid : "oVirt <infra(a)ovirt.org>" Fingerprint: 31a5 d783 7fad 7cb2 86cd 3469 ab8c 4f9d fe59 0cb7 Package : ovirt-release42-4.2.3.1-1.el7.noarch (installed) From : /etc/pki/rpm-gpg/RPM-GPG-ovirt-4.2 Is this ok [y/N]: y Running transaction check Running transaction test Transaction test succeeded Running transaction Installing : ovirt-node-ng-image-update-4.2.4-1.el7.noarch 1/3 warning: %post(ovirt-node-ng-image-update-4.2.4-1.el7.noarch) scriptlet failed, exit status 1 Non-fatal POSTIN scriptlet failure in rpm package ovirt-node-ng-image-update-4.2.4-1.el7.noarch Erasing : ovirt-node-ng-image-update-placeholder-4.2.3.1-1.el7.noarch 2/3 Cleanup : ovirt-node-ng-image-update-4.2.3.1-1.el7.noarch 3/3 warning: file /usr/share/ovirt-node-ng/image/ovirt-node-ng-4.2.0-0.20180530.0.el7.squashfs.img: remove failed: No such file or directory Uploading Package Profile Unable to upload Package Profile Verifying : ovirt-node-ng-image-update-4.2.4-1.el7.noarch 1/3 Verifying : ovirt-node-ng-image-update-4.2.3.1-1.el7.noarch 2/3 Verifying : ovirt-node-ng-image-update-placeholder-4.2.3.1-1.el7.noarch 3/3 Installed: ovirt-node-ng-image-update.noarch 0:4.2.4-1.el7 Replaced: ovirt-node-ng-image-update-placeholder.noarch 0:4.2.3.1-1.el7 Complete! Uploading Enabled Repositories Report Loaded plugins: fastestmirror, product-id, subscription-manager This system is not registered with an entitlement server. You can use subscription-manager to register. Cannot upload enabled repos report, is this client registered? My engine shows the nodes as having no updates, however the major components including the kernel version and port 9090 admin GUI show 4.2.3 Is there anything I can provide to help diagnose the issue? [root@node6-g8-h4 ~]# rpm -qa | grep ovirt ovirt-imageio-common-1.3.1.2-0.el7.centos.noarch ovirt-host-deploy-1.7.3-1.el7.centos.noarch ovirt-vmconsole-host-1.0.5-4.el7.centos.noarch ovirt-provider-ovn-driver-1.2.10-1.el7.centos.noarch ovirt-engine-sdk-python-3.6.9.1-1.el7.noarch ovirt-setup-lib-1.1.4-1.el7.centos.noarch ovirt-release42-4.2.3.1-1.el7.noarch ovirt-imageio-daemon-1.3.1.2-0.el7.centos.noarch ovirt-hosted-engine-setup-2.2.20-1.el7.centos.noarch ovirt-host-dependencies-4.2.2-2.el7.centos.x86_64 ovirt-hosted-engine-ha-2.2.11-1.el7.centos.noarch ovirt-host-4.2.2-2.el7.centos.x86_64 ovirt-node-ng-image-update-4.2.4-1.el7.noarch ovirt-vmconsole-1.0.5-4.el7.centos.noarch ovirt-release-host-node-4.2.3.1-1.el7.noarch cockpit-ovirt-dashboard-0.11.24-1.el7.centos.noarch ovirt-node-ng-nodectl-4.2.0-0.20180524.0.el7.noarch python-ovirt-engine-sdk4-4.2.6-2.el7.centos.x86_64 [root@node6-g8-h4 ~]# yum update Loaded plugins: enabled_repos_upload, fastestmirror, imgbased-persist, package_upload, product-id, search-disabled-repos, subscription-manager This system is not registered with an entitlement server. You can use subscription-manager to register. Loading mirror speeds from cached hostfile * ovirt-4.2-epel: linux.mirrors.es.net No packages marked for update Uploading Enabled Repositories Report Loaded plugins: fastestmirror, product-id, subscription-manager This system is not registered with an entitlement server. You can use subscription-manager to register. Cannot upload enabled repos report, is this client registered?

6 29

oVirt 4.2 Self-hosted engine deployment fails at the end - "failed liveliness check"
by Aleksander Maricq 04 Jul '18

04 Jul '18

I successfully deployed an oVirt 4.2 self-hosted engine setup just over 6 months ago, and recently tried to re-install to modify hostnames on the engine and hypervisor. After I cleaned up and re-ran hosted-engine --deploy my install failed right at the end (TASK [Wait for the engine to come up on the target VM]) with the following error: ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:98 fatal and the following engine vm status: Engine status: {"reason": "failed liveliness check", "health": "bad", "vm": "up", "detail": "Up"} I opted to do a clean re-install of CentOS 7.5 and try again, but I keep running into the same error (see the attached logs). Some details that may or may not be helpful: - I'm reusing old mount points without formatting such as /home and my previous NFS-exported storage domain LVMs. The root partition, swap, /boot, and the engine destination LVMs were all re-formatted during the CentOS 7.5 install or prior to attempted oVirt install. - I'm reusing the MAC address from the previous attempt (so that it picks up the static entry I put on my router). - I currently only have entries in /etc/hosts to map FQDNs to IPs, but the install fails the same way whether or not I tell the process to populate the engine VM's hosts file. - Prior to my re-install of CentOS 7.5 I tried, and was able, to log into the engine appliance. I saw the hosted engine VM was listed as "down", and there was some temporary VM (leftover from the install process?) that I couldn't do anything to. Thanks in advance for your help!

2 2

remote-viewer Spice Problem on MacOS
by hpeyerl＠plusline.net 04 Jul '18

04 Jul '18

Hi all, we are currently experiencing a weird problem with oVirt and the spice console on MacOS: Occasionally when our Mac Users are connecting to a Spice Console of any oVirt VM it opens the usual window but just displays the message: "Connected to graphic server". When a Linux user now connects to it and closes the connection the Mac user can also connect again normally. I have tried https://www.spice-space.org/osx-client.html and https://rizvir.com/articles/ovirt-mac-console/ with exactly the same behaviour. The Issue appears on several different MacOS Versions and we believe it started after our upgrade to oVirt 4.2. MacOS Version: 10.13.5 oVirt Version: 4.2.3.8-1.el7 Any help or suggestion is greatly appreciated. Best regards, Hendrik

10 15

LDAP login extension
by Mariusz Kozakowski 04 Jul '18

04 Jul '18

Hello, We managed to setup oVirt Engine with your help, now we're facing other issue. I'm trying to configure AD auth for web portal, but unfortunately I got error during ovirt-engine-extension-aaa-ldap-setup: 2018-06-27 09:06:21,926+02 INFO ======================================================================== 2018-06-27 09:06:21,926+02 INFO ============================== Execution =============================== 2018-06-27 09:06:21,926+02 INFO ======================================================================== 2018-06-27 09:06:21,927+02 INFO Iteration: 0 2018-06-27 09:06:21,928+02 INFO Profile='ad' authn='ad-authn' authz='ad-authz' mapping='null' 2018-06-27 09:06:21,928+02 INFO API: -->Authn.InvokeCommands.AUTHENTICATE_CREDENTIALS profile='ad' user='username' 2018-06-27 09:06:21,945+02 INFO API: <--Authn.InvokeCommands.AUTHENTICATE_CREDENTIALS profile='ad' result=SUCCESS 2018-06-27 09:06:21,948+02 INFO --- Begin AuthRecord --- 2018-06-27 09:06:21,949+02 INFO AAA_AUTHN_AUTH_RECORD_PRINCIPAL: username 2018-06-27 09:06:21,949+02 INFO --- End AuthRecord --- 2018-06-27 09:06:21,950+02 INFO API: -->Authz.InvokeCommands.FETCH_PRINCIPAL_RECORD principal='username' 2018-06-27 09:06:21,952+02 WARNING Ignoring records from pool: 'gc' 2018-06-27 09:06:21,953+02 SEVERE Cannot resolve principal 'username' Do you have any idea what's the issue and what we're missing? As it looks like credentials are correct - passing wrong username gives fail earlier, so issue is somewhere after authentication. -- Best regards/Pozdrawiam/MfG Mariusz Kozakowski Site Reliability Engineer Dansk Supermarked Group Baltic Business Park ul. 1 Maja 38-39 71-627 Szczecin dansksupermarked.com

2 1

oVirt Authentication and Authorization
by Hari Prasanth Loganathan 04 Jul '18

04 Jul '18

Hi Team, We have three components in our setup 1) Our Script (application using python) 2) Ovirt 3) LDAP (Also integrated to oVirt) 1) Our Python application is authenticating to LDAP and it creates a token for our application 2) For accessing the API's in oVIrt, I need to contact to the oVirt API which authenticates and creates a token for it 3) then I need to maintain the token of my application with its mapping to the ovirt tokenId in my application. When I want to hit any oVirt API, First I perform the token check in my application (using my application token) then I need to perform the ovirt token check in oVirt. 1) * I would like to know Is there a way to skip the authentication and authorization in oVIrt? * 2)* Or Is it possible to point the authentication check for oVirt (to my application / to some URL which I configure) which always return true and allow for all oVirt API's?* *I did some analysis and verified the oVirt code in github, Identified that it is going via a fliter in web.xml which points to the class, Is it possible to tune this? * <filter> <filter-name>RestApiSessionValidationFilter</filter-name> <filter-class>org.ovirt.engine.core.aaa.filters.RestApiSessionValidationFilter</filter-class> </filter> <filter-mapping> <filter-name>RestApiSessionValidationFilter</filter-name> <url-pattern>/*</url-pattern> </filter-mapping> <filter> <filter-name>SessionValidationFilter</filter-name> <filter-class>org.ovirt.engine.core.aaa.filters.SessionValidationFilter</filter-class> </filter> <filter-mapping> <filter-name>SessionValidationFilter</filter-name> <url-pattern>/*</url-pattern> </filter-mapping> <filter> <filter-name>SsoRestApiAuthFilter</filter-name> <filter-class>org.ovirt.engine.core.aaa.filters.SsoRestApiAuthFilter</filter-class> </filter> <filter-mapping> <filter-name>SsoRestApiAuthFilter</filter-name> <url-pattern>/*</url-pattern> </filter-mapping> <filter> <filter-name>SsoRestApiNegotiationFilter</filter-name> <filter-class>org.ovirt.engine.core.aaa.filters.SsoRestApiNegotiationFilter</filter-class> </filter> <filter-mapping> <filter-name>SsoRestApiNegotiationFilter</filter-name> <url-pattern>/*</url-pattern> </filter-mapping> If my query is not clear, please let me know. Thanks, Hari

3 5

Error with with increasing resources of the HostedEngine. VM values that are locked
by Egor Panov 04 Jul '18

04 Jul '18

Hi, I have problem with increasing resources of the HostedEngine:"There was an attempt to change Hosted Engine VM values that are locked» I read the articles https://access.redhat.com/solutions/3023041 <https://access.redhat.com/solutions/3023041> https://access.redhat.com/solutions/3133781 <https://access.redhat.com/solutions/3133781> From thus articles "The message from the engine.log the problem comes with not editable filed.» "Inital Run" -> Uncheck "Use Cloud-Init/Sysprep» had already unchecked. And it means that another field is locked. I did support log-collector with the database dump # ovirt-log-collector --no-hypervisors But I didn’t find in output what field is not editable. Can you help me with it? Regards, Egor Panov System Administrator Skype: e.panoff Tel: + 7 (916) 182-62-13 This e-mail and the attachments, if any, are confidential and may be legally privileged, and are for the sole use of the intended recipient. If you are not the intended recipient of this e-mail or any part of it, please delete it from your computer.

2 2

Fresh 4.2 install: engine-setup skipping NFS share step
by davemintz64＠gmail.com 03 Jul '18

03 Jul '18

Any idea why the install script is not asking me if I want to set up the local ISO nfs share? I thought it might be because I am using the entire disk, but I tried creating a separate partition/mount for ti and it still didn't work. This is what I see: --== APACHE CONFIGURATION ==-- Setup can configure the default page of the web server to present the application home page. This may conflict with existing applications. Do you wish to set the application as the default page of the web server? (Yes, No) [Yes]: Setup can configure apache to use SSL using a certificate issued from the internal CA. Do you wish Setup to configure that, or prefer to perform that manually? (Automatic, Manual) [Automatic]: --== SYSTEM CONFIGURATION ==-- [The NFS questions should be here but it is blank] --== MISC CONFIGURATION ==-- Please choose Data Warehouse sampling scale: (1) Basic (2) Full Thanks in advance. Dave

4 4

ovirt-guest-agent-common version and repo
by Gianluca Cecchi 03 Jul '18

03 Jul '18

Hello, on CentOS 7.x VM with epel enabled it seems that latest package is ovirt-guest-agent-common-1.0.14-1.el7.noarch and from its changelog it seems far from being up 2 date and released before 4.2.0 release... * Thu Nov 02 2017 Tomáš Golembiovský <tgolembi(a)redhat.com> - 1.0.14-1 - Bump to version 1.0.14 - Changed link to upstream sources Am I doing something wrong with it and its repo or is it not so important component even after upgrading to oVirt 4.2.x? Thanks, Gianluca

2 2

Ovirt and L2 Gateway
by carlgrundholm＠gmail.com 03 Jul '18

03 Jul '18

I have install ovirt 4.2.3 and everything seems to be working fine: I can create virtual (Geneve overlay) networks for communication between virtual machines via the external provider ovirt-provider-ovn by using the OWS switch on the cluster. Live migrations and everything else within the virtual environment works perfectly :-) For connections from virtual machines to physical VLAN's in a switch, I can also create a logical network which is created using the external provider ovirt-provider-ovn by specifying a connection to a physical VLAN network created as a separate data center network. This method requires that all ovirt-nodes (hosts) in the cluster have access to the physical network though. What I am looking for is a way to implement a L2 Gateway such that (not all) ovirt nodes (hosts) need to have direct access to the physical network. What I am looking for is a way where virtual machines can communicate with the L2 Gateway via virtual (Geneve overlay) networks. On the L2 Gateway the virtual network shall then be bridged to the physical VLAN on a dedicated network interface. My goal is that the virtual network and the physical network becomes one big broadcast domain. This concept has been described by different people on the Internet such as these articles: - https://weiti.org/ovn/2018/01/03/ovn-l2-breakout-options - https://wiki.openstack.org/wiki/Neutron/L2-GW How can I accomplish something similar in an ovirt-environment? Thanks in advance, Carl Grundholm

2 3

Hosted engine Deploy failed
by Lakhwinder Rai 01 Jul '18

01 Jul '18

i have error while installing hosted engine. if anybody have solution for this,please help i stuck here from two days. [ INFO ] TASK [Wait for the host to be up] [ ERROR ] fatal: [localhost]: FAILED! => {"ansible_facts": {"ovirt_hosts": []}, "attempts": 120, "changed": false} [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Remove local vm dir] [ INFO ] changed: [localhost] [ INFO ] TASK [Notify the user about a failure] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} thanks

2 1

oVirt HCI point-to-point interconnection
by Stefano Zappa 29 Jun '18

29 Jun '18

Good morning, I would like to kindly ask you a question about the feasibility of defining a point-to-point interconnection between three ovirt nodes. Initially with the idea of optimizing the direct communications between the nodes and especially the gluster communications, and so it would seem quite easy, then evaluating a more complex configuration, assuming to create an overlay L2 network on the three L3 point-to-point, using techniques like geneve, of which at the moment I have no mastery. If the direct routing of three nodes to interconnect the public network with the private overlay network was not easily doable, we could leave the private overlay network isolated from the outside world and connect the VM hosted engine directly to the two networks with two adapters. This layout with direct interconnection of the nodes without switches and a shared L2 overlay network between the nodes may in future be contemplated in future releases of your HCI solution? Thank you for your attention, have a nice day! Stefano Zappa. [cid:609f1f14-f74e-489f-b86d-08647efc6d1c] Stefano Zappa IT Specialist CAE - TT-3 Industrie Saleri Italo S.p.A. Phone: +39 0308250480 Fax: +39 0308250466 This message contains confidential information and is intended only for users(a)ovirt.org, infra(a)ovirt.org, devel(a)ovirt.org. If you are not users(a)ovirt.org, infra(a)ovirt.org, devel(a)ovirt.org you should not disseminate, distribute or copy this e-mail. Please notify Stefano.Zappa(a)saleri.it immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Stefano Zappa therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. PRIVACY INFORMATION ART. 13 EU REG. 2016/679 We inform you that the personal data contained in the present and subsequent electronic communications will be processed in compliance with the EU Regulation 2016/679, for the purpose of and only for the time necessary to allow the sender to carry out the activities connected to the existing commercial relationships. The provision of personal data is not mandatory. However, failure to provide them determines the impossibility of achieving the aforementioned purpose. With regard to these data, is allowed the exercise of the rights set out in art. 13 and from the articles from 15 to 22 of EU Regulation 2016/679 and in particular the right to request the access to, updating, rectification and erasure of your personal data, as well as the right to object to processing and to lodge a complaint with the Supervisory Authority, by sending an e-mail to privacy(a)saleri.it. Data Controller of your personal data is Industrie Saleri Italo S.p.a., with registered office in via Ruca, 406 - 25065 Lumezzane (BS).

5 8

Snapshot error with Cinder/Ceph disk
by Matthias Leopold 29 Jun '18

29 Jun '18

Hi, i'm having problems with snapshotting Cinder/Ceph disks since upgrading to 4.2. Observed behavior has changed between 4.2.2 and 4.2.4. With oVirt 4.2.2 and Cinder 11.1.0 - oVirt snapshot fails (according to oVirt), but is listed in GUI - disk snapshot are visible in oVirt storage domain tab and Cinder CLI - first try to remove the oVirt snapshot fails (according to oVirt), but disk snapshots are removed from oVirt storage domain tab and Cinder CLI - second try to remove oVirt snapshot succeeds With oVirt 4.2.4 and Cinder 11.1.1 - oVirt snapshot fails "completely" - in Cinder logs i can see that disk snapshots are created and immediately deleted oVirt error log message is the same in both cases: "Failed in 'SnapshotVDS' method" I'm attaching logs from oVirt engine from the latter case. thx for any advice matthias

2 2

where did virbr0: come from?
by Conrad Jones 29 Jun '18

29 Jun '18

I installed * CentOS * Master repo for ovirt * create ovirtmgmt bridge via network scripts (not virbr0) * installed VDSM * installed cockpit * installed cockpit-ovirt-dashboard.noarch i suspect the virbr0 came from installing the cockpit-ovirt-dashboard.noarch components as it also installed a whole host of stuff like virt-manager-common.noarch Anyway this causes the hosted ovirt-engine vm install to fail from cockpit as "[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "hostname 'host-141' doesn't uniquely match the interface 'enp3s0' selected for the management bridge; it matches also interface with IP [u'192.168.122.1']. Please make sure that the hostname got from the interface for the management network resolves only there.\n"}" ----------- [sysadmin@host-141 ~]$ ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master ovirtmgmt state UP group default qlen 1000 link/ether e0:d5:5e:73:ad:5e brd ff:ff:ff:ff:ff:ff inet6 fe80::e2d5:5eff:fe73:ad5e/64 scope link valid_lft forever preferred_lft forever 18: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether e0:d5:5e:73:ad:5e brd ff:ff:ff:ff:ff:ff inet 192.168.1.141/24 brd 192.168.1.255 scope global ovirtmgmt valid_lft forever preferred_lft forever inet6 fe80::e2d5:5eff:fe73:ad5e/64 scope link valid_lft forever preferred_lft forever 19: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000 link/ether 52:54:00:e5:0d:40 brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 valid_lft forever preferred_lft forever 20: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN group default qlen 1000 link/ether 52:54:00:e5:0d:40 brd ff:ff:ff:ff:ff:ff

2 1

Unable to do Live Migration
by rni＠chef.net 28 Jun '18

28 Jun '18

Hello, I'm using a 4 node cluster oVirt 4.1. After updating the Engine to 4.2.3.8 (and ContOS 7.5), I tried to update the nodes too. Unfortunally, the live migration is not working (any more). Maybe it's related to following error found in engine.log 2018-06-19 09:32:53,469+02 WARN [org.ovirt.engine.core.bll.provider.network.openstack.CustomizedRESTEasyConnector] (EE-ManagedThreadFactory-engineScheduled-Thread-7) [4d6a7dc4] Cannot register external providers trust store: java.io.IOException: Keystore was tampered with, or password was incorrect 2018-06-19 09:32:53,475+02 ERROR [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-7) [4d6a7dc4] Command 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' failed: EngineException: (Failed with error unable to find valid certification path to requested target and code 5050) I'm using the selfsigned CA provided with oVirt. Nodes (source and destination) OS-Version:RHEL - 7 - 4.1708.el7.centos Kernelversion: 3.10.0 - 693.21.1.el7.x86_64 KVM-Version:2.9.0 - 16.el7_4.14.1 LIBVIRT-Version:libvirt-3.2.0-14.el7_4.9 VDSM-Version:vdsm-4.19.45-1.el7.centos SPICE-Version:0.12.8 - 2.el7.1 CEPH-Version:librbd1-0.94.5-2.el7 Kernel Features:PTI: 1, IBPB: 0, IBRS: 0 engine.log for the mirgration: 2018-06-14 13:13:30,300+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-246968) [] EVENT_ID: VM_MIGRATION_START_SYSTEM_INITIATED(67), Migration initiated by system (VM: vm_to_migrate, Source: SOURCE, Destination: DESTINATION, Reason: Host preparing for maintenance). 2018-06-14 13:13:32,886+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmsStatisticsFetcher] (EE-ManagedThreadFactory-engineScheduled-Thread-94) [] Fetched 8 VMs from VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498' 2018-06-14 13:13:32,887+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-94) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111'(vm_to_migrate) was unexpectedly detected as 'MigratingTo' on VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) (expected on 'ea7bae8f-d966-4baa-b8b4-a5522b88ec3a') 2018-06-14 13:13:32,887+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-94) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111' is migrating to VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) ignoring it in the refresh until migration is done 2018-06-14 13:13:47,939+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-42) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111'(vm_to_migrate) was unexpectedly detected as 'MigratingTo' on VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) (expected on 'ea7bae8f-d966-4baa-b8b4-a5522b88ec3a') 2018-06-14 13:13:47,939+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-42) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111' is migrating to VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) ignoring it in the refresh until migration is done 2018-06-14 13:14:02,993+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-13) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111'(vm_to_migrate) was unexpectedly detected as 'MigratingTo' on VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) (expected on 'ea7bae8f-d966-4baa-b8b4-a5522b88ec3a') 2018-06-14 13:14:02,993+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-13) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111' is migrating to VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) ignoring it in the refresh until migration is done 2018-06-14 13:14:18,042+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111'(vm_to_migrate) was unexpectedly detected as 'MigratingTo' on VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) (expected on 'ea7bae8f-d966-4baa-b8b4-a5522b88ec3a') 2018-06-14 13:14:18,042+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111' is migrating to VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) ignoring it in the refresh until migration is done 2018-06-14 13:14:33,090+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-85) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111'(vm_to_migrate) was unexpectedly detected as 'MigratingTo' on VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) (expected on 'ea7bae8f-d966-4baa-b8b4-a5522b88ec3a') 2018-06-14 13:14:33,090+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-85) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111' is migrating to VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) ignoring it in the refresh until migration is done 2018-06-14 13:14:38,356+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-43) [6d991f10] Lock Acquired to object 'EngineLock:{exclusiveLocks='[d1457e7e-f29d-49ac-b635-2457a7cbc59f=PROVIDER]', sharedLocks=''}' 2018-06-14 13:14:38,369+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-43) [6d991f10] Running command: SyncNetworkProviderCommand internal: true. 2018-06-14 13:14:38,370+02 WARN [org.ovirt.engine.core.bll.provider.network.openstack.CustomizedRESTEasyConnector] (EE-ManagedThreadFactory-engineScheduled-Thread-43) [6d991f10] Cannot register external providers trust store: java.io.IOException: Keystore was tampered with, or password was incorrect 2018-06-14 13:14:38,379+02 ERROR [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-43) [6d991f10] Command 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' failed: EngineException: (Failed with error unable to find valid certification path to requested target and code 5050) 2018-06-14 13:14:38,382+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-43) [6d991f10] Lock freed to object 'EngineLock:{exclusiveLocks='[d1457e7e-f29d-49ac-b635-2457a7cbc59f=PROVIDER]', sharedLocks=''}' 2018-06-14 13:14:48,139+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-92) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111'(vm_to_migrate) was unexpectedly detected as 'MigratingTo' on VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) (expected on 'ea7bae8f-d966-4baa-b8b4-a5522b88ec3a') 2018-06-14 13:14:48,139+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-92) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111' is migrating to VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) ignoring it in the refresh until migration is done 2018-06-14 13:15:03,193+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-71) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111'(vm_to_migrate) was unexpectedly detected as 'MigratingTo' on VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) (expected on 'ea7bae8f-d966-4baa-b8b4-a5522b88ec3a') 2018-06-14 13:15:03,193+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-71) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111' is migrating to VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) ignoring it in the refresh until migration is done 2018-06-14 13:15:18,242+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-63) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111'(vm_to_migrate) was unexpectedly detected as 'MigratingTo' on VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) (expected on 'ea7bae8f-d966-4baa-b8b4-a5522b88ec3a') 2018-06-14 13:15:18,242+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-63) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111' is migrating to VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) ignoring it in the refresh until migration is done 2018-06-14 13:15:33,293+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-17) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111'(vm_to_migrate) was unexpectedly detected as 'MigratingTo' on VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) (expected on 'ea7bae8f-d966-4baa-b8b4-a5522b88ec3a') 2018-06-14 13:15:33,293+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-17) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111' is migrating to VDS 'f3749f1e-a68d-424f-aa3a-f0ec996df498'(DESTINATION) ignoring it in the refresh until migration is done 2018-06-14 13:15:45,377+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-10) [] VM '4aff4193-ba75-481d-92b3-59b62cd8b111'(vm_to_migrate) moved from 'MigratingFrom' --> 'Up' 2018-06-14 13:15:45,377+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-10) [] Adding VM '4aff4193-ba75-481d-92b3-59b62cd8b111'(vm_to_migrate) to re-run list 2018-06-14 13:15:45,400+02 ERROR [org.ovirt.engine.core.vdsbroker.monitoring.VmsMonitoring] (EE-ManagedThreadFactory-engineScheduled-Thread-10) [] Rerun VM '4aff4193-ba75-481d-92b3-59b62cd8b111'. Called from VDS 'SOURCE' 2018-06-14 13:15:45,451+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (EE-ManagedThreadFactory-engine-Thread-247023) [] START, MigrateStatusVDSCommand(HostName = SOURCE, MigrateStatusVDSCommandParameters:{hostId='ea7bae8f-d966-4baa-b8b4-a5522b88ec3a', vmId='4aff4193-ba75-481d-92b3-59b62cd8b111'}), log id: 25f95334 2018-06-14 13:15:45,453+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (EE-ManagedThreadFactory-engine-Thread-247023) [] FINISH, MigrateStatusVDSCommand, log id: 25f95334 2018-06-14 13:15:45,478+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-247023) [] EVENT_ID: VM_MIGRATION_TRYING_RERUN(128), Failed to migrate VM vm_to_migrate to Host DESTINATION . Trying to migrate to another Host. 2018-06-14 13:15:45,557+02 INFO [org.ovirt.engine.core.bll.MigrateVmCommand] (EE-ManagedThreadFactory-engine-Thread-247023) [] Running command: MigrateVmCommand internal: true. Entities affected : ID: 4aff4193-ba75-481d-92b3-59b62cd8b111 Type: VMAction group MIGRATE_VM with role type USER 2018-06-14 13:15:45,595+02 INFO [org.ovirt.engine.core.vdsbroker.MigrateVDSCommand] (EE-ManagedThreadFactory-engine-Thread-247023) [] START, MigrateVDSCommand( MigrateVDSCommandParameters:{hostId='ea7bae8f-d966-4baa-b8b4-a5522b88ec3a', vmId='4aff4193-ba75-481d-92b3-59b62cd8b111', srcHost='10.157.8.37', dstVdsId='69ebacd7-ee55-4c52-abf1-437a14d5fb0d', dstHost='10.157.8.42:54321', migrationMethod='ONLINE', tunnelMigration='false', migrationDowntime='0', autoConverge='false', migrateCompressed='false', consoleAddress='null', maxBandwidth='500', enableGuestEvents='false', maxIncomingMigrations='2', maxOutgoingMigrations='2', convergenceSchedule='null', dstQemu='192.168.1.113'}), log id: 736d023f 2018-06-14 13:15:45,595+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateBrokerVDSCommand] (EE-ManagedThreadFactory-engine-Thread-247023) [] START, MigrateBrokerVDSCommand(HostName = SOURCE, MigrateVDSCommandParameters:{hostId='ea7bae8f-d966-4baa-b8b4-a5522b88ec3a', vmId='4aff4193-ba75-481d-92b3-59b62cd8b111', srcHost='10.157.8.37', dstVdsId='69ebacd7-ee55-4c52-abf1-437a14d5fb0d', dstHost='10.157.8.42:54321', migrationMethod='ONLINE', tunnelMigration='false', migrationDowntime='0', autoConverge='false', migrateCompressed='false', consoleAddress='null', maxBandwidth='500', enableGuestEvents='false', maxIncomingMigrations='2', maxOutgoingMigrations='2', convergenceSchedule='null', dstQemu='192.168.1.113'}), log id: 58572c5b 2018-06-14 13:15:45,601+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateBrokerVDSCommand] (EE-ManagedThreadFactory-engine-Thread-247023) [] FINISH, MigrateBrokerVDSCommand, log id: 58572c5b 2018-06-14 13:15:45,604+02 INFO [org.ovirt.engine.core.vdsbroker.MigrateVDSCommand] (EE-ManagedThreadFactory-engine-Thread-247023) [] FINISH, MigrateVDSCommand, return: MigratingFrom, log id: 736d023f

4 7

oVirt 4.2 max limits
by Simon Coter 28 Jun '18

28 Jun '18

Hi, I’m looking for documentation reference on oVirt max-limits, like max number of guest on single compute-node, max number of LUNs into a storage domain or others. Is there a reference on oVirt documentation ? Actually the only thing I found is related to RHEV and memory (https://access.redhat.com/articles/906543 <https://access.redhat.com/articles/906543>) Thanks for the help. Simon

2 4

CVE-2018-3639 qemu-kvm-ev-2.10.0-21.el7_5.4.1 is now available for testing
by Sandro Bonazzola 28 Jun '18

28 Jun '18

Hi, qemu-kvm-ev-2.10.0-21.el7_5.4.1 has been tagged for testing. If nothing shows up, I'll tag it for release on Monday July 2nd. Here's the changelog: * Thu Jun 28 2018 Sandro Bonazzola <sbonazzo(a)redhat.com> - ev-2.10.0-21.el7_5.4.1 - Removing RH branding from package name * Sat Jun 09 2018 Miroslav Rezanina <mrezanin(a)redhat.com> - rhev-2.10.0-21.el7_5.4 - kvm-scsi-disk-allow-customizing-the-SCSI-version.patch [bz#1571370] - kvm-hw-scsi-support-SCSI-2-passthrough-without-PI.patch [bz#1571370] - kvm-i386-Define-the-Virt-SSBD-MSR-and-handling-of-it-CVE.patch [bz#1584370] - kvm-i386-define-the-AMD-virt-ssbd-CPUID-feature-bit-CVE-.patch [bz#1584370] - kvm-cpus-Fix-event-order-on-resume-of-stopped-guest.patch [bz#1582122] - kvm-spec-Enable-Native-Ceph-support-on-all-architectures.patch [bz#1588001] - Resolves: bz#1571370 (Pegas1.1 Alpha: SCSI pass-thru of aacraid RAID1 is inaccessible (qemu-kvm-rhev) [rhel-7.5.z]) - Resolves: bz#1582122 (IOERROR pause code lost after resuming a VM while I/O error is still present [rhel-7.5.z]) - Resolves: bz#1584370 (CVE-2018-3639 qemu-kvm-rhev: hw: cpu: AMD: speculative store bypass [rhel-7.5.z]) - Resolves: bz#1588001 (Enable Native Ceph support on non x86_64 CPUs [rhel-7.5.z]) For testing: $ sudo yum install centos-release-qemu-ev $ sudo yum-config-manager --enable centos-qemu-ev-test $ sudo yum update "qemu-kvm-ev*" and use it as usual. Thanks, -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0

Error in disk statistics REST API
by Hari Prasanth Loganathan 28 Jun '18

28 Jun '18

Hi Team, We are getting this error for the following API https://172.30.X.X/ovirt-engine/api/disks?follow=statistics *But the following API works :* https://172.30.X.X/ovirt-engine/api/vms?follow=statistics *Error in server.log: (when we try to hit to the https://172.30.X.X/ovirt-engine/api/disks?follow=statistics <https://172.30.X.X/ovirt-engine/api/disks?follow=statistics>)* 2018-06-28 13:05:00,393+05 ERROR [io.undertow.request] (default task-2) UT005023: Exception handling request to /ovirt-engine/api/v4/disks: java.lang.RuntimeException: org.jboss.resteasy.spi.UnhandledException: java.lang.IllegalStateException: Problem following 'statistics' link in Disks entity. at io.undertow.servlet.spec.RequestDispatcherImpl.forwardImpl(RequestDispatcherImpl.java:245) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.spec.RequestDispatcherImpl.forwardImplSetup(RequestDispatcherImpl.java:147) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.spec.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:111) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at org.ovirt.engine.api.restapi.invocation.VersionFilter.doFilter(VersionFilter.java:180) [restapi-jaxrs.jar:] at org.ovirt.engine.api.restapi.invocation.VersionFilter.doFilter(VersionFilter.java:98) [restapi-jaxrs.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at org.ovirt.engine.api.restapi.invocation.CurrentFilter.doFilter(CurrentFilter.java:117) [restapi-jaxrs.jar:] at org.ovirt.engine.api.restapi.invocation.CurrentFilter.doFilter(CurrentFilter.java:72) [restapi-jaxrs.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at org.ovirt.engine.core.aaa.filters.RestApiSessionMgmtFilter.doFilter(RestApiSessionMgmtFilter.java:78) [aaa.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at org.ovirt.engine.core.aaa.filters.EnforceAuthFilter.doFilter(EnforceAuthFilter.java:42) [aaa.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at org.ovirt.engine.core.aaa.filters.SsoRestApiNegotiationFilter.doFilter(SsoRestApiNegotiationFilter.java:84) [aaa.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at org.ovirt.engine.core.aaa.filters.SsoRestApiAuthFilter.doFilter(SsoRestApiAuthFilter.java:47) [aaa.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at org.ovirt.engine.core.aaa.filters.SessionValidationFilter.doFilter(SessionValidationFilter.java:59) [aaa.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at org.ovirt.engine.core.aaa.filters.RestApiSessionValidationFilter.doFilter(RestApiSessionValidationFilter.java:35) [aaa.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at org.ovirt.engine.api.restapi.security.CSRFProtectionFilter.doFilter(CSRFProtectionFilter.java:111) [restapi-jaxrs.jar:] at org.ovirt.engine.api.restapi.security.CSRFProtectionFilter.doFilter(CSRFProtectionFilter.java:102) [restapi-jaxrs.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at org.ovirt.engine.core.utils.servlet.CORSSupportFilter.doFilter(CORSSupportFilter.java:284) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) [undertow-core-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) [undertow-core-1.4.18.Final.jar:1.4.18.Final] at io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:53) [undertow-core-1.4.18.Final.jar:1.4.18.Final] at io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46) [undertow-core-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:59) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60) [undertow-core-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50) [undertow-core-1.4.18.Final.jar:1.4.18.Final] at io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43) [undertow-core-1.4.18.Final.jar:1.4.18.Final] at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) [undertow-core-1.4.18.Final.jar:1.4.18.Final] at org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) [undertow-core-1.4.18.Final.jar:1.4.18.Final] at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) [undertow-core-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:292) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.ServletInitialHandler.access$100(ServletInitialHandler.java:81) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.ServletInitialHandler$2.call(ServletInitialHandler.java:138) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.ServletInitialHandler$2.call(ServletInitialHandler.java:135) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.core.ServletRequestContextThreadSetupAction$1.call(ServletRequestContextThreadSetupAction.java:48) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.core.ContextClassLoaderSetupAction$1.call(ContextClassLoaderSetupAction.java:43) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at org.wildfly.extension.undertow.security.SecurityContextThreadSetupAction.lambda$create$0(SecurityContextThreadSetupAction.java:105) at org.wildfly.extension.undertow.deployment.UndertowDeploymentInfoService$UndertowThreadSetupAction.lambda$create$0(UndertowDeploymentInfoService.java:1508) at org.wildfly.extension.undertow.deployment.UndertowDeploymentInfoService$UndertowThreadSetupAction.lambda$create$0(UndertowDeploymentInfoService.java:1508) at org.wildfly.extension.undertow.deployment.UndertowDeploymentInfoService$UndertowThreadSetupAction.lambda$create$0(UndertowDeploymentInfoService.java:1508) at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:272) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:104) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.server.Connectors.executeRootHandler(Connectors.java:326) [undertow-core-1.4.18.Final.jar:1.4.18.Final] at io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:812) [undertow-core-1.4.18.Final.jar:1.4.18.Final] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) [rt.jar:1.8.0_161] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) [rt.jar:1.8.0_161] at java.lang.Thread.run(Thread.java:748) [rt.jar:1.8.0_161] Caused by: org.jboss.resteasy.spi.UnhandledException: java.lang.IllegalStateException: Problem following 'statistics' link in Disks entity. at org.jboss.resteasy.core.ExceptionHandler.handleApplicationException(ExceptionHandler.java:78) [resteasy-jaxrs-3.0.24.Final.jar:3.0.24.Final] at org.jboss.resteasy.core.ExceptionHandler.handleException(ExceptionHandler.java:222) [resteasy-jaxrs-3.0.24.Final.jar:3.0.24.Final] at org.jboss.resteasy.core.SynchronousDispatcher.writeException(SynchronousDispatcher.java:179) [resteasy-jaxrs-3.0.24.Final.jar:3.0.24.Final] at org.jboss.resteasy.core.SynchronousDispatcher.invoke(SynchronousDispatcher.java:422) [resteasy-jaxrs-3.0.24.Final.jar:3.0.24.Final] at org.jboss.resteasy.core.SynchronousDispatcher.invoke(SynchronousDispatcher.java:213) [resteasy-jaxrs-3.0.24.Final.jar:3.0.24.Final] at org.jboss.resteasy.plugins.server.servlet.ServletContainerDispatcher.service(ServletContainerDispatcher.java:228) [resteasy-jaxrs-3.0.24.Final.jar:3.0.24.Final] at org.jboss.resteasy.plugins.server.servlet.HttpServletDispatcher.service(HttpServletDispatcher.java:56) [resteasy-jaxrs-3.0.24.Final.jar:3.0.24.Final] at org.jboss.resteasy.plugins.server.servlet.HttpServletDispatcher.service(HttpServletDispatcher.java:51) [resteasy-jaxrs-3.0.24.Final.jar:3.0.24.Final] at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:81) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) [undertow-core-1.4.18.Final.jar:1.4.18.Final] at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) [undertow-core-1.4.18.Final.jar:1.4.18.Final] at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) [undertow-core-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:274) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.handlers.ServletInitialHandler.dispatchToPath(ServletInitialHandler.java:209) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] at io.undertow.servlet.spec.RequestDispatcherImpl.forwardImpl(RequestDispatcherImpl.java:221) [undertow-servlet-1.4.18.Final.jar:1.4.18.Final] ... 73 more Caused by: java.lang.IllegalStateException: Problem following 'statistics' link in Disks entity. at org.ovirt.engine.api.restapi.resource.utils.LinkFollower.fetchData(LinkFollower.java:185) [restapi-jaxrs.jar:] at org.ovirt.engine.api.restapi.resource.utils.LinkFollower.followLink(LinkFollower.java:144) [restapi-jaxrs.jar:] at org.ovirt.engine.api.restapi.resource.utils.LinkFollower.followLinks(LinkFollower.java:132) [restapi-jaxrs.jar:] at org.ovirt.engine.api.restapi.resource.utils.LinkFollower.followLinks(LinkFollower.java:53) [restapi-jaxrs.jar:] at org.ovirt.engine.api.restapi.resource.BaseBackendResource.follow(BaseBackendResource.java:412) [restapi-jaxrs.jar:] at org.ovirt.engine.api.resource.DisksResource.doList(DisksResource.java:222) [restapi-definition.jar:] at sun.reflect.GeneratedMethodAccessor684.invoke(Unknown Source) [:1.8.0_161] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_161] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_161] at org.jboss.resteasy.core.MethodInjectorImpl.invoke(MethodInjectorImpl.java:140) [resteasy-jaxrs-3.0.24.Final.jar:3.0.24.Final] at org.jboss.resteasy.core.ResourceMethodInvoker.invokeOnTarget(ResourceMethodInvoker.java:295) [resteasy-jaxrs-3.0.24.Final.jar:3.0.24.Final] at org.jboss.resteasy.core.ResourceMethodInvoker.invoke(ResourceMethodInvoker.java:249) [resteasy-jaxrs-3.0.24.Final.jar:3.0.24.Final] at org.jboss.resteasy.core.ResourceLocatorInvoker.invokeOnTargetObject(ResourceLocatorInvoker.java:138) [resteasy-jaxrs-3.0.24.Final.jar:3.0.24.Final] at org.jboss.resteasy.core.ResourceLocatorInvoker.invoke(ResourceLocatorInvoker.java:101) [resteasy-jaxrs-3.0.24.Final.jar:3.0.24.Final] at org.jboss.resteasy.core.SynchronousDispatcher.invoke(SynchronousDispatcher.java:406) [resteasy-jaxrs-3.0.24.Final.jar:3.0.24.Final] ... 88 more *Caused by: java.lang.IllegalStateException: Problem fetching 'statistics' from Disk* at org.ovirt.engine.api.restapi.resource.utils.LinkFollower.fetchData(LinkFollower.java:219) [restapi-jaxrs.jar:] at org.ovirt.engine.api.restapi.resource.utils.LinkFollower.fetchData(LinkFollower.java:182) [restapi-jaxrs.jar:] ... 102 more *Caused by: java.lang.NullPointerException* at org.ovirt.engine.api.restapi.resource.utils.LinkFollower.getHref(LinkFollower.java:250) [restapi-jaxrs.jar:] at org.ovirt.engine.api.restapi.resource.utils.LinkFollower.fetchData(LinkFollower.java:211) [restapi-jaxrs.jar:] ... 103 more Thanks, Hari

1 1

oVirt 4.2.4: Enable only strong ciphers/Disable TLS versions < 1.2
by Matthias Leopold 28 Jun '18

28 Jun '18

Hi, i decided to update my test environment (4.2.2) today and noticed oVirt 4.2.4 is out ;-) i have some dumb questions concerning - BZ 1582527 Enable only strong ciphers from engine to VDSM communication for hosts in cluster level >= 4.2 - BZ 1577593 Disable TLS versions < 1.2 for hosts with cluster level >= 4.1 Is simply updating a host from 4.2.2 to 4.2.4 enough to apply the changes mentioned above? Or do i have to reinstall hosts in addition to upgrading? Before or after the upgrade? My cluster was on cluster level 4.2 when i started. My hosts are type: Enterprise Linux (CentOS) thx matthias

3 2

Hypervisor issue after upgrade
by stephen.brecht＠inmarsat.com 28 Jun '18

28 Jun '18

Hi I'm looking for some help with an issue with one of our hypervisors We recently upgraded one of our hypervisors from ovirt 4.0 to 4.1 and Centos 7.3.1611 to 7.4.1708 using the following procedure: 1. Migrated all VMs off hypervisor 2. Put hypervisor into maintenance mode and deleted it from the cluster 3. Re-subscribed the hypervisor in katello to the new OS channels 4. Upgraded the OS to 7.4.1708 5. After reboot subscribed the hypervisor to the new ovirt 4.1 channels 6. Added the hypervisor back into the cluster (this installed the new ovirt packages) 7. Returned hypervisor to maintenance mode 8. Applied any remaining updates and rebooted 9. Checked all required networks were assigned to the hypervisor 10. Took the hypervisor out of maintenance mode After 5 mins of the hypervisor sitting in 'Activating' it finally got into an up state, however we get an error in the event log: Failed to activate Host <node>.(User: <user>@<domin>) Looking in the engine log I can see the following: 2018-06-27 12:32:43,445 ERROR [org.ovirt.engine.core.bll.network.host.GetVdsInterfacesByVdsIdQuery] (org.ovirt.thread.pool-6-thread-48) [] Query 'GetVdsInterfacesByVdsIdQuery' failed: Could not get JDBC Connection; nested exception is java.sql.SQLException: javax.resource.ResourceException: IJ000460: Error checking for a transaction 2018-06-27 12:32:43,445 ERROR [org.ovirt.engine.core.bll.network.host.GetVdsInterfacesByVdsIdQuery] (org.ovirt.thread.pool-6-thread-48) [] Exception: org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get JDBC Connection; nested exception is java.sql.SQLException: javax.resource.ResourceException: IJ000460: Error checking for a transaction at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:80) [spring-jdbc.jar:4.2.4.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:615) [spring-jdbc.jar:4.2.4.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:680) [spring-jdbc.jar:4.2.4.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:712) [spring-jdbc.jar:4.2.4.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:762) [spring-jdbc.jar:4.2.4.RELEASE] at org.ovirt.engine.core.dal.dbbroker.PostgresDbEngineDialect$PostgresSimpleJdbcCall.executeCallInternal(PostgresDbEngineDialect.java:154) [dal.jar:] at org.ovirt.engine.core.dal.dbbroker.PostgresDbEngineDialect$PostgresSimpleJdbcCall.doExecute(PostgresDbEngineDialect.java:120) [dal.jar:] at org.springframework.jdbc.core.simple.SimpleJdbcCall.execute(SimpleJdbcCall.java:198) [spring-jdbc.jar:4.2.4.RELEASE] at org.ovirt.engine.core.dal.dbbroker.SimpleJdbcCallsHandler.executeImpl(SimpleJdbcCallsHandler.java:147) [dal.jar:] at org.ovirt.engine.core.dal.dbbroker.SimpleJdbcCallsHandler.executeReadList(SimpleJdbcCallsHandler.java:109) [dal.jar:] at org.ovirt.engine.core.dal.dbbroker.SimpleJdbcCallsHandler.executeRead(SimpleJdbcCallsHandler.java:101) [dal.jar:] at org.ovirt.engine.core.dao.ClusterDaoImpl.get(ClusterDaoImpl.java:52) [dal.jar:] at org.ovirt.engine.core.dao.ClusterDaoImpl.get(ClusterDaoImpl.java:44) [dal.jar:] at org.ovirt.engine.core.vdsbroker.NetworkImplementationDetailsUtils.build(NetworkImplementationDetailsUtils.java:72) [vdsbroker.jar:] at org.ovirt.engine.core.vdsbroker.NetworkImplementationDetailsUtils.build(NetworkImplementationDetailsUtils.java:85) [vdsbroker.jar:] at org.ovirt.engine.core.vdsbroker.NetworkImplementationDetailsUtils.calculateNetworkImplementationDetails(NetworkImplementationDetailsUtils.java:58) [vdsbroker.jar:] at org.ovirt.engine.core.bll.network.host.GetVdsInterfacesByVdsIdQuery.executeQueryCommand(GetVdsInterfacesByVdsIdQuery.java:86) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103) [bll.jar:] at org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33) [dal.jar:] at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runInternalQuery(Backend.java:524) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runInternalQuery(Backend.java:734) [bll.jar:] at sun.reflect.GeneratedMethodAccessor242.invoke(Unknown Source) [:1.8.0_141] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_141] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_141] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70) [wildfly-weld-10.1.0.Final.jar:10.1.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80) [wildfly-weld-10.1.0.Final.jar:10.1.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93) [wildfly-weld-10.1.0.Final.jar:10.1.0.Final] at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13) [bll.jar:] at sun.reflect.GeneratedMethodAccessor162.invoke(Unknown Source) [:1.8.0_141] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_141] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_141] at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43) [wildfly-ejb3-10.1.0.Final.jar:10.1.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) [weld-core-impl-2.3.5.Final.jar:2.3.5.Final] at org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83) [wildfly-weld-10.1.0.Final.jar:10.1.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45) [wildfly-ee-10.1.0.Final.jar:10.1.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [wildfly-ejb3-10.1.0.Final.jar:10.1.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInCallerTx(CMTTxInterceptor.java:254) [wildfly-ejb3-10.1.0.Final.jar:10.1.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:376) [wildfly-ejb3-10.1.0.Final.jar:10.1.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243) [wildfly-ejb3-10.1.0.Final.jar:10.1.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [wildfly-ejb3-10.1.0.Final.jar:10.1.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:47) [wildfly-ejb3-10.1.0.Final.jar:10.1.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100) [wildfly-ejb3-10.1.0.Final.jar:10.1.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.deployment.processors.StartupAwaitInterceptor.processInvocation(StartupAwaitInterceptor.java:22) [wildfly-ejb3-10.1.0.Final.jar:10.1.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64) [wildfly-ejb3-10.1.0.Final.jar:10.1.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:67) [wildfly-ejb3-10.1.0.Final.jar:10.1.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636) at org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:198) at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73) at org.ovirt.engine.core.bll.interfaces.BackendInternal$$$view4.runInternalQuery(Unknown Source) [bll.jar:] at sun.reflect.GeneratedMethodAccessor946.invoke(Unknown Source) [:1.8.0_141] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_141] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_141] at org.jboss.weld.util.reflection.Reflections.invokeAndUnwrap(Reflections.java:433) [weld-core-impl-2.3.5.Final.jar:2.3.5.Final] at org.jboss.weld.bean.proxy.EnterpriseBeanProxyMethodHandler.invoke(EnterpriseBeanProxyMethodHandler.java:128) [weld-core-impl-2.3.5.Final.jar:2.3.5.Final] at org.jboss.weld.bean.proxy.EnterpriseTargetBeanInstance.invoke(EnterpriseTargetBeanInstance.java:56) [weld-core-impl-2.3.5.Final.jar:2.3.5.Final] at org.jboss.weld.bean.proxy.ProxyMethodHandler.invoke(ProxyMethodHandler.java:100) [weld-core-impl-2.3.5.Final.jar:2.3.5.Final] at org.ovirt.engine.core.bll.BackendCommandObjectsHandler$BackendInternal$BackendLocal$2049259618$Proxy$_$$_Weld$EnterpriseProxy$.runInternalQuery(Unknown Source) [bll.jar:] at org.ovirt.engine.core.bll.network.cluster.NetworkClusterHelper.getHostInterfaces(NetworkClusterHelper.java:147) [bll.jar:] at org.ovirt.engine.core.bll.network.cluster.NetworkClusterHelper.atLeastOneHostDoesNotHaveNetworkAttached(NetworkClusterHelper.java:131) [bll.jar:] at org.ovirt.engine.core.bll.network.cluster.NetworkClusterHelper.updateStatusOfRequiredNetworkCluster(NetworkClusterHelper.java:115) [bll.jar:] at org.ovirt.engine.core.bll.network.cluster.NetworkClusterHelper.setStatus(NetworkClusterHelper.java:97) [bll.jar:] at org.ovirt.engine.core.bll.ActivateVdsCommand.lambda$executeCommand$0(ActivateVdsCommand.java:71) [bll.jar:] at org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInNewTransaction(TransactionSupport.java:204) [utils.jar:] at org.ovirt.engine.core.bll.ActivateVdsCommand.executeCommand(ActivateVdsCommand.java:67) [bll.jar:] at org.ovirt.engine.core.bll.CommandBase.executeWithoutTransaction(CommandBase.java:1305) [bll.jar:] at org.ovirt.engine.core.bll.CommandBase.executeActionInTransactionScope(CommandBase.java:1447) [bll.jar:] at org.ovirt.engine.core.bll.CommandBase.runInTransaction(CommandBase.java:2075) [bll.jar:] at org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInSuppressed(TransactionSupport.java:166) [utils.jar:] at org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInScope(TransactionSupport.java:105) [utils.jar:] at org.ovirt.engine.core.bll.CommandBase.execute(CommandBase.java:1490) [bll.jar:] at org.ovirt.engine.core.bll.CommandBase.executeAction(CommandBase.java:398) [bll.jar:] at org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner.executeValidatedCommand(PrevalidatingMultipleActionsRunner.java:204) [bll.jar:] at org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner.runCommands(PrevalidatingMultipleActionsRunner.java:176) [bll.jar:] at org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner.lambda$invokeCommands$3(PrevalidatingMultipleActionsRunner.java:182) [bll.jar:] at org.ovirt.engine.core.utils.threadpool.ThreadPoolUtil$InternalWrapperRunnable.run(ThreadPoolUtil.java:92) [utils.jar:] at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511) [rt.jar:1.8.0_141] at java.util.concurrent.FutureTask.run(FutureTask.java:266) [rt.jar:1.8.0_141] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) [rt.jar:1.8.0_141] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) [rt.jar:1.8.0_141] at java.lang.Thread.run(Thread.java:748) [rt.jar:1.8.0_141] Caused by: java.sql.SQLException: javax.resource.ResourceException: IJ000460: Error checking for a transaction at org.jboss.jca.adapters.jdbc.WrapperDataSource.getConnection(WrapperDataSource.java:146) at org.jboss.as.connector.subsystems.datasources.WildFlyDataSource.getConnection(WildFlyDataSource.java:66) at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:111) [spring-jdbc.jar:4.2.4.RELEASE] at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:77) [spring-jdbc.jar:4.2.4.RELEASE] ... 119 more Caused by: javax.resource.ResourceException: IJ000460: Error checking for a transaction at org.jboss.jca.core.connectionmanager.tx.TxConnectionManagerImpl.getManagedConnection(TxConnectionManagerImpl.java:424) at org.jboss.jca.core.connectionmanager.AbstractConnectionManager.allocateConnection(AbstractConnectionManager.java:747) at org.jboss.jca.adapters.jdbc.WrapperDataSource.getConnection(WrapperDataSource.java:138) ... 122 more Caused by: javax.resource.ResourceException: IJ000459: Transaction is not active: tx=TransactionImple < ac, BasicAction: 0:ffffac12138e:19e6ae22:5b3234b8:4595d status: ActionStatus.ABORTED > at org.jboss.jca.core.connectionmanager.tx.TxConnectionManagerImpl.getManagedConnection(TxConnectionManagerImpl.java:408) ... 124 more 2018-06-27 12:32:43,449 INFO [org.ovirt.engine.core.utils.transaction.TransactionSupport] (org.ovirt.thread.pool-6-thread-48) [] transaction rolled back 2018-06-27 12:32:43,449 INFO [org.ovirt.engine.core.bll.ActivateVdsCommand] (org.ovirt.thread.pool-6-thread-48) [] Activate host finished. Lock released. Monitoring can run now for host '<host>' from data-center '<DC>' 2018-06-27 12:32:43,449 ERROR [org.ovirt.engine.core.bll.ActivateVdsCommand] (org.ovirt.thread.pool-6-thread-48) [] Command 'org.ovirt.engine.core.bll.ActivateVdsCommand' failed: null 2018-06-27 12:32:43,449 ERROR [org.ovirt.engine.core.bll.ActivateVdsCommand] (org.ovirt.thread.pool-6-thread-48) [] Exception: java.lang.NullPointerException at org.ovirt.engine.core.bll.network.cluster.NetworkClusterHelper.atLeastOneHostDoesNotHaveNetworkAttached(NetworkClusterHelper.java:133) [bll.jar:] at org.ovirt.engine.core.bll.network.cluster.NetworkClusterHelper.updateStatusOfRequiredNetworkCluster(NetworkClusterHelper.java:115) [bll.jar:] at org.ovirt.engine.core.bll.network.cluster.NetworkClusterHelper.setStatus(NetworkClusterHelper.java:97) [bll.jar:] at org.ovirt.engine.core.bll.ActivateVdsCommand.lambda$executeCommand$0(ActivateVdsCommand.java:71) [bll.jar:] at org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInNewTransaction(TransactionSupport.java:204) [utils.jar:] at org.ovirt.engine.core.bll.ActivateVdsCommand.executeCommand(ActivateVdsCommand.java:67) [bll.jar:] at org.ovirt.engine.core.bll.CommandBase.executeWithoutTransaction(CommandBase.java:1305) [bll.jar:] at org.ovirt.engine.core.bll.CommandBase.executeActionInTransactionScope(CommandBase.java:1447) [bll.jar:] at org.ovirt.engine.core.bll.CommandBase.runInTransaction(CommandBase.java:2075) [bll.jar:] at org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInSuppressed(TransactionSupport.java:166) [utils.jar:] at org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInScope(TransactionSupport.java:105) [utils.jar:] at org.ovirt.engine.core.bll.CommandBase.execute(CommandBase.java:1490) [bll.jar:] at org.ovirt.engine.core.bll.CommandBase.executeAction(CommandBase.java:398) [bll.jar:] at org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner.executeValidatedCommand(PrevalidatingMultipleActionsRunner.java:204) [bll.jar:] at org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner.runCommands(PrevalidatingMultipleActionsRunner.java:176) [bll.jar:] at org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner.lambda$invokeCommands$3(PrevalidatingMultipleActionsRunner.java:182) [bll.jar:] at org.ovirt.engine.core.utils.threadpool.ThreadPoolUtil$InternalWrapperRunnable.run(ThreadPoolUtil.java:92) [utils.jar:] at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511) [rt.jar:1.8.0_141] at java.util.concurrent.FutureTask.run(FutureTask.java:266) [rt.jar:1.8.0_141] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) [rt.jar:1.8.0_141] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) [rt.jar:1.8.0_141] at java.lang.Thread.run(Thread.java:748) [rt.jar:1.8.0_141] Caused by: java.sql.SQLException: javax.resource.ResourceException: IJ000460: Error checking for a transaction at org.jboss.jca.adapters.jdbc.WrapperDataSource.getConnection(WrapperDataSource.java:146) at org.jboss.as.connector.subsystems.datasources.WildFlyDataSource.getConnection(WildFlyDataSource.java:66) at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:111) [spring-jdbc.jar:4.2.4.RELEASE] at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:77) [spring-jdbc.jar:4.2.4.RELEASE] ... 119 more Caused by: javax.resource.ResourceException: IJ000460: Error checking for a transaction at org.jboss.jca.core.connectionmanager.tx.TxConnectionManagerImpl.getManagedConnection(TxConnectionManagerImpl.java:424) at org.jboss.jca.core.connectionmanager.AbstractConnectionManager.allocateConnection(AbstractConnectionManager.java:747) at org.jboss.jca.adapters.jdbc.WrapperDataSource.getConnection(WrapperDataSource.java:138) ... 122 more Caused by: javax.resource.ResourceException: IJ000459: Transaction is not active: tx=TransactionImple < ac, BasicAction: 0:ffffac12138e:19e6ae22:5b3234b8:4595d status: ActionStatus.ABORTED > at org.jboss.jca.core.connectionmanager.tx.TxConnectionManagerImpl.getManagedConnection(TxConnectionManagerImpl.java:408) ... 124 more 2018-06-27 12:32:43,449 INFO [org.ovirt.engine.core.utils.transaction.TransactionSupport] (org.ovirt.thread.pool-6-thread-48) [] transaction rolled back 2018-06-27 12:32:43,449 INFO [org.ovirt.engine.core.bll.ActivateVdsCommand] (org.ovirt.thread.pool-6-thread-48) [] Activate host finished. Lock released. Monitoring can run now for host '<host>' from data-center '<DC>'ine.core.bll.ActivateVdsCommand] (org.ovirt.thread.pool-6-thread-48) [] Command 'org.ovirt.engine.core.bll.ActivateVdsCommand' failed: null 4186-bf54-17123ca3c491, Call Stack: null, Custom Event ID: -1, Message: Failed to activate Host <host>.(User: <user>@<domain>). 2018-06-27 12:32:43,464 INFO [org.ovirt.engine.core.bll.ActivateVdsCommand] (org.ovirt.thread.pool-6-thread-48) [] Lock freed to object 'EngineLock:{exclusiveLocks='[d35d9e0c-3c83-4a9d-8f8e-b72df5ea521c=<VDS, ACTION_TYPE_FAILED_OBJECT_LOCKED>]', sharedLocks='null'}' 2018-06-27 12:32:47,033 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand] (DefaultQuartzScheduler2) [e83484a] START, GetHardwareInfoVDSCommand(HostName = <host>, VdsIdAndVdsVDSCommandParametersBase:{runAsync='true', hostId='<ID>', vds='Host[<host>]'}), log id: 3b9e6de5 2018-06-27 12:32:47,035 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand] (DefaultQuartzScheduler2) [e83484a] FINISH, GetHardwareInfoVDSCommand, log id: 3b9e6de5 2018-06-27 12:32:47,837 INFO [org.ovirt.engine.core.bll.HandleVdsCpuFlagsOrClusterChangedCommand] (DefaultQuartzScheduler2) [233b0ff4] Running command: HandleVdsCpuFlagsOrClusterChangedCommand internal: true. Entities affected : ID: <ID> Type: VDS 2018-06-27 12:32:47,859 INFO [org.ovirt.engine.core.bll.InitVdsOnUpCommand] (DefaultQuartzScheduler2) [2d5a709e] Running command: InitVdsOnUpCommand internal: true. Entities affected : ID: <ID> Type: StoragePool 2018-06-27 12:32:47,863 INFO [org.ovirt.engine.core.bll.storage.pool.ConnectHostToStoragePoolServersCommand] (DefaultQuartzScheduler2) [257c0825] Running command: ConnectHostToStoragePoolServersCommand internal: true. Entities affected : ID: <ID> Type: StoragePool 2018-06-27 12:32:47,879 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStorageServerVDSCommand] (DefaultQuartzScheduler2) [257c0825] START, ConnectStorageServerVDSCommand(HostName = <host>, StorageServerConnectionManagementVDSParameters:{runAsync='true', hostId='<ID>', storagePoolId='<ID>', storageType='FCP', connectionList='[StorageServerConnections:{id='00000000-0000-0000-0000-000000000000', connection='null', iqn='null', vfsType='null', mountOptions='null', nfsVersion='null', nfsRetrans='null', nfsTimeo='null', iface='null', netIfaceName='null'}]'}), log id: 797eeb05 at org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner.lambda$invokeCommands$3(PrevalidatingMultipleActionsRunner.java:182) [bll.jar:] at org.ovirt.engine.core.utils.threadpool.ThreadPoolUtil$InternalWrapperRunnable.run(ThreadPoolUtil.java:92) [utils.jar:] at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511) [rt.jar:1.8.0_141] at java.util.concurrent.FutureTask.run(FutureTask.java:266) [rt.jar:1.8.0_141] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) [rt.jar:1.8.0_141] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) [rt.jar:1.8.0_141] at java.lang.Thread.run(Thread.java:748) [rt.jar:1.8.0_141] 2018-06-27 12:32:43,458 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-6-thread-48) [] Correlation ID: 4fd81e15, Job ID: d2504aa4-cded-4186-bf54-17123ca3c491, Call Stack: null, Custom Event ID: -1, Message: Failed to activate Host <host>.(User: <user>@<domian>). 2018-06-27 12:32:43,464 INFO [org.ovirt.engine.core.bll.ActivateVdsCommand] (org.ovirt.thread.pool-6-thread-48) [] Lock freed to object 'EngineLock:{exclusiveLocks='[<ID>=<VDS, ACTION_TYPE_FAILED_OBJECT_LOCKED>]', sharedLocks='null'}' 2018-06-27 12:32:47,033 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand] (DefaultQuartzScheduler2) [e83484a] START, GetHardwareInfoVDSCommand(HostName = <host>, VdsIdAndVdsVDSCommandParametersBase:{runAsync='true', hostId='<ID>', vds='Host[<host>]'}), log id: 3b9e6de5 2018-06-27 12:32:47,035 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand] (DefaultQuartzScheduler2) [e83484a] FINISH, GetHardwareInfoVDSCommand, log id: 3b9e6de5 2018-06-27 12:32:47,837 INFO [org.ovirt.engine.core.bll.HandleVdsCpuFlagsOrClusterChangedCommand] (DefaultQuartzScheduler2) [233b0ff4] Running command: HandleVdsCpuFlagsOrClusterChangedCommand internal: true. Entities affected : ID: <ID> Type: VDS 2018-06-27 12:32:47,859 INFO [org.ovirt.engine.core.bll.InitVdsOnUpCommand] (DefaultQuartzScheduler2) [2d5a709e] Running command: InitVdsOnUpCommand internal: true. Entities affected : ID: 57fe604a-010a-01af-0280-0000000001d0 Type: StoragePool At the same time I see these in the engine server.log: 2018-06-27 12:32:43,436 WARN [com.arjuna.ats.arjuna] (Transaction Reaper) ARJUNA012117: TransactionReaper::check timeout for TX 0:ffffac12138e:19e6ae22:5b3234b8:4595d in state RUN 2018-06-27 12:32:43,438 WARN [com.arjuna.ats.arjuna] (Transaction Reaper Worker 0) ARJUNA012095: Abort of action id 0:ffffac12138e:19e6ae22:5b3234b8:4595d invoked while multiple threads active within it. 2018-06-27 12:32:43,439 WARN [com.arjuna.ats.arjuna] (Transaction Reaper Worker 0) ARJUNA012381: Action id 0:ffffac12138e:19e6ae22:5b3234b8:4595d completed with multiple threads - thread org.ovirt.thread.pool-6-thread-48 was in progress with java.math.BigInteger.squareToLen(BigInteger.java:1915) 2018-06-27 12:32:43,439 WARN [com.arjuna.ats.arjuna] (Transaction Reaper Worker 0) ARJUNA012108: CheckedAction::check - atomic action 0:ffffac12138e:19e6ae22:5b3234b8:4595d aborting with 1 threads active! 2018-06-27 12:32:43,441 WARN [com.arjuna.ats.arjuna] (Transaction Reaper Worker 0) ARJUNA012121: TransactionReaper::doCancellations worker Thread[Transaction Reaper Worker 0,5,main] successfully canceled TX 0:ffffac12138e:19e6ae22:5b3234b8:4595d 2018-06-27 12:32:43,449 WARN [com.arjuna.ats.arjuna] (org.ovirt.thread.pool-6-thread-48) ARJUNA012077: Abort called on already aborted atomic action 0:ffffac12138e:19e6ae22:5b3234b8:4595d Any help is resolving this issue would be appricated Thanks

1 0

Import/export VMs from/to Vbox, Vmware
by Aziz 28 Jun '18

28 Jun '18

Hi All, I'm trying to import/export ova files between oVirt and other platforms (Virtualbox / Vmware workstation), however, this is not working for some reason. it's important to have oVirt compliant with these platforms, to easily migrate Vms between them. Can anyone comment on this, is there a way to convert the vms ? Thank you in advance.

4 6

Broker fails to start after upgrade 4.1 to 4.2 metadata_image_UUID can't be ''
by reznikov_aa＠soskol.com 28 Jun '18

28 Jun '18

Hi list! After upgrade my cluster from 4.1.9 to 4.2.2, agent and broker can't start on host... cat /var/log/ovirt-hosted-engine-ha/agent.log MainThread::ERROR::2018-06-21 03:25:34,603::hosted_engine::538::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_broker) Failed to start necessary monitors MainThread::ERROR::2018-06-21 03:25:34,604::agent::144::ovirt_hosted_engine_ha.agent.agent.Agent::(_run_agent) Traceback (most recent call last) cat /var/log/ovirt-hosted-engine-ha/broker.log MainThread::INFO::2018-06-21 03:25:40,406::monitor::50::ovirt_hosted_engine_ha.broker.monitor.Monitor::(_discover_submonitors) Finished loading submonitors MainThread::WARNING::2018-06-21 03:25:40,406::storage_broker::97::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(__init__) Can't connect vdsm storage: 'metadata_image_UUID can't be '' cat /etc/ovirt-hosted-engine/hosted-engine.conf | grep metadata_image metadata_image_UUID= Also is: cat /etc/ovirt-hosted-engine/hosted-engine.conf | grep lock lockspace_image_UUID= lockspace_volume_UUID= This bug is very much like this https://bugzilla.redhat.com/show_bug.cgi?id=1521011 My cluster started with version 3.3... But i can't resolution this bug correctly. Guru please help me!!! Thanx, Alex!

4 7

Cannot acquire Lock .... snapshot error
by Enrico Becchetti 27 Jun '18

27 Jun '18

Dear All, my ovirt 4.2.1.7-1.el7.centos has three hypervisors, lvm storage and virtiual machine with ovirt-engine. All works fine but with one vm when I try to remove its snapshot I have this error: 2018-06-22 07:35:48,155+0200 INFO (jsonrpc/5) [vdsm.api] START prepareMerge(spUUID=u'18d57688-6ed4-43b8-bd7c-0665b55950b7', subchainInfo={u'img_id': u'c5611862-6504-445e-a6c8-f1e1a95b5df7', u'sd_id': u'47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5', u'top_id': u'0e6f7512-871d-4645-b9c6-320ba7e3bee7', u'base_id': u'e156ac2e-09ac-4e1e-a139-17fa374a96d4'}) from=::ffff:10.0.0.46,53304, flow_id=07011450-2296-4a13-a9ed-5d5d2b91be98, task_id=87f95d85-cc3d-4f29-9883-a4dbb3808f88 (api:46) 2018-06-22 07:35:48,406+0200 INFO (tasks/3) [storage.merge] Preparing subchain <SubchainInfo sd_id=47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5, img_id=c5611862-6504-445e-a6c8-f1e1a95b5df7, top_id=0e6f7512-871d-4645-b9c6-320ba7e3bee7, base_id=e156ac2e-09ac-4e1e-a139-17fa374a96d4 base_generation=None at 0x7fcf84ae2510> for merge (merge:177) 2018-06-22 07:35:48,614+0200 INFO (tasks/3) [storage.SANLock] Acquiring Lease(name='e156ac2e-09ac-4e1e-a139-17fa374a96d4', path='/dev/47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5/leases', offset=115343360) for host id 1 (clusterlock:377) 2018-06-22 07:35:48,634+0200 ERROR (tasks/3) [storage.guarded] Error acquiring lock <VolumeLease ns=04_lease_47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5, name=e156ac2e-09ac-4e1e-a139-17fa374a96d4, mode=exclusive at 0x7fcfe09ddf90> (guarded:96) AcquireLockFailure: Cannot obtain lock: "id=47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5, rc=-227, out=Cannot acquire Lease(name='e156ac2e-09ac-4e1e-a139-17fa374a96d4', path='/dev/47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5/leases', offset=115343360), err=(-227, 'Sanlock resource not acquired', 'Lease resource name is incorrect')" 2018-06-22 07:35:56,881+0200 INFO (jsonrpc/7) [vdsm.api] FINISH getAllTasksStatuses return={'allTasksStatus': {'87f95d85-cc3d-4f29-9883-a4dbb3808f88': {'code': 651, 'message': 'Cannot obtain lock: "id=47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5, rc=-227, out=Cannot acquire Lease(name=\'e156ac2e-09ac-4e1e-a139-17fa374a96d4\', path=\'/dev/47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5/leases\', offset=115343360), err=(-227, \'Sanlock resource not acquired\', \'Lease resource name is incorrect\')"', 'taskState': 'finished', 'taskResult': 'cleanSuccess', 'taskID': '87f95d85-cc3d-4f29-9883-a4dbb3808f88'}}} from=::ffff:10.0.0.46,53136, task_id=d0e2f4e3-90cb-43c6-aa08-98d1f7efb1bd (api:52) Any ideas ? Many thanks to everybody. Best Regards Enrico -- _______________________________________________________________________ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchetti<at>pg.infn.it ______________________________________________________________________

3 9

Problems import vm/uploading disk
by Alan G 27 Jun '18

27 Jun '18

Hi, I'm trying to import a KVM VM into Ovirt. First I tried the GUI VM import functionality and this failed with the error below. However other VMs from the same source host were imported fine. read-32893::ERROR::2018-06-27 09:43:48,703::v2v::679::root::(_run) Job u'1a5fe287-d2dd-429c-87b5-6f240b59c17f' failed Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/v2v.py", line 674, in _run self._import() File "/usr/lib/python2.7/site-packages/vdsm/v2v.py", line 691, in _import with self._command.execute() as self._proc: File "/usr/lib64/python2.7/contextlib.py", line 17, in __enter__ return self.gen.next() File "/usr/lib/python2.7/site-packages/vdsm/v2v.py", line 597, in execute yield self._start_helper() File "/usr/lib/python2.7/site-packages/vdsm/v2v.py", line 374, in _start_helper env=self._environment()) File "/usr/lib/python2.7/site-packages/vdsm/commands.py", line 71, in execCmd deathSignal=deathSignal) File "/usr/lib64/python2.7/site-packages/cpopen/__init__.py", line 63, in __init__ **kw) File "/usr/lib64/python2.7/subprocess.py", line 711, in __init__ errread, errwrite) File "/usr/lib64/python2.7/site-packages/cpopen/__init__.py", line 83, in _execute_child_v276 _to_close=to_close File "/usr/lib64/python2.7/site-packages/cpopen/__init__.py", line 118, in _execute_child_v275 restore_sigpipe OSError: [Errno 0] Error Thread-32893::ERROR::2018-06-27 09:43:48,704::v2v::686::root::(_run) Job u'1a5fe287-d2dd-429c-87b5-6f240b59c17f', error trying to abort: AttributeError("'NoneType' object has no attribute 'returncode'",) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/v2v.py", line 683, in _run self._abort() File "/usr/lib/python2.7/site-packages/vdsm/v2v.py", line 743, in _abort if self._proc.returncode is None: AttributeError: 'NoneType' object has no attribute 'returncode' Second I tried using the disk upload feature in the GUI, but this created the target disk then fails to upload the content - I've ensured that the relevant CAs are loaded into the browser. Third I successfully imported the VM into an ovirt 4.2 instance in the lab, but can find no way of then importing it into ovirt 4.0 as the storage domain format seems not to be backwards compatible. Finally I used the upload_disk.py example script from python SDK. This creates the disk and starts to upload the content but always fails at 2% with "socket.error: [Errno 32] Broken pipe" Any ideas on how I can get this qcow2 image loaded into ovirt 4.0? Thanks, Alan

4 4

Host unable to run VMs after upgrading to 4.2 release
by Michael Watters 27 Jun '18

27 Jun '18

After upgrading our ovirt hosts to the 4.2.4 release two nodes are unable to run VMs. The vdsm.log shows a failure which appears to be related to firewalld. 2018-06-27 10:58:08,340-0400 ERROR (vm/5a42e1ed) [virt.vm] (vmId='5a42e1ed-7b9f-42f2-b1c3-403276cf1cd9') The vm start process failed (vm:943) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 872, in _startUnderlyingVm self._run() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2876, in _run dom.createWithFlags(flags) File "/usr/lib/python2.7/site-packages/vdsm/common/libvirtconnection.py", line 130, in wrapper ret = f(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/common/function.py", line 92, in wrapper return func(inst, *args, **kwargs) File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1099, in createWithFlags if ret == -1: raise libvirtError ('virDomainCreateWithFlags() failed', dom=self) libvirtError: The name org.fedoraproject.FirewallD1 was not provided by any .service files 2018-06-27 10:58:08,342-0400 INFO (vm/5a42e1ed) [virt.vm] (vmId='5a42e1ed-7b9f-42f2-b1c3-403276cf1cd9') Changed state to Down: The name org.fedoraproject.FirewallD1 was not provided by any .service files (code=1) (vm:1683) The cluster this host is a member of is configured to use *iptables*, not firewalld. Is there a way to resolve this? What package provides the .service file that vdsm is looking for?

1 0

NAT+IP masquerading with oVirt 4.2
by julius.schwartzenberg＠gmail.com 27 Jun '18

27 Jun '18

Hi, I'm trying to set up NAT+IP masquerading with oVirt 4.2. I have enabled the libvirt default network on virbr0 and added a network with the same name in oVirt. I have also installed vdsm-hook-extnet and set extnet to 'default' for this network to default. When I try to start my VM with this network assigned to it, I get this error: The host ovirthost did not satisfy internal filter Network because network(s) virbr0 are missing. What should I do to solve this? Best regards, Julius

1 0

RHEL5 guests frequently hang when migrating host.
by Eduardo Mayoral 27 Jun '18

27 Jun '18

Hi, I am experiencing that my RHEL5 guests frequently "hang" when migrating host. Console is blank, CPU after migration is 100% and as far as oVirt is concerned, the VM is OK. oVirt is 4.2.3.8-1.el7, on CentOS 7. Hosts are CentOS 7 as well. Cluster is in "Intel Westmere family" CPU type. Guest is RHEL5, fully patched, kernel 4.2.3.8-1.el7 with ovirt-guest-agent installed from EPEL. I do not see anything out of place in the ovirt-engine and vdsm logs, and the guest logs are simply not there, the stop right before the migration,as if the machine had "frozen". Powering the VM off and starting it starts the VM correctly. This does not happen 100% of the time. If I try to migrate the VM when it is freshly started the migration is faster (maybe 5 seconds), and the guest OS does not hang. Anybody else experiencing something similar? Maybe something (timeouts?) that I should tune on the guest OS for RHEL5? Thanks! -- Eduardo Mayoral.

3 3

Internal Server Error 'AutoProxy[instance]' object has no attribute 'glusterLogicalVolumeList'
by Hesham Ahmed 27 Jun '18

27 Jun '18

I am receiving the following error in journal repeatedly every few minutes on all 3 nodes of a hyperconverged oVirt 4.2.3 setup running oVirt Nodes: Jun 25 06:03:26 vhost01.somedomain.com vdsm[45222]: ERROR Internal server error Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 606, in _handle_request res = method(**params) File "/usr/lib/python2.7/site-packages/vdsm/rpc/Bridge.py", line 197, in _dynamicMethod result = fn(*methodArgs) File "/usr/lib/python2.7/site-packages/vdsm/gluster/apiwrapper.py", line 85, in logicalVolumeList return self._gluster.logicalVolumeList() File "/usr/lib/python2.7/site-packages/vdsm/gluster/api.py", line 90, in wrapper rv = func(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/gluster/api.py", line 808, in logicalVolumeList status = self.svdsmProxy.glusterLogicalVolumeList() File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 55, in __call__ return callMethod() File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 52, in <lambda> getattr(self._supervdsmProxy._svdsm, self._funcName)(*args, AttributeError: 'AutoProxy[instance]' object has no attribute 'glusterLogicalVolumeList' And in /var/log/vdsm/vdsm.log 2018-06-25 06:03:24,118+0300 INFO (jsonrpc/6) [jsonrpc.JsonRpcServer] RPC call Host.getCapabilities succeeded in 0.79 seconds (__init__:573) 2018-06-25 06:03:26,106+0300 ERROR (jsonrpc/0) [jsonrpc.JsonRpcServer] Internal server error (__init__:611) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 606, in _handle_request res = method(**params) File "/usr/lib/python2.7/site-packages/vdsm/rpc/Bridge.py", line 197, in _dynamicMethod result = fn(*methodArgs) File "/usr/lib/python2.7/site-packages/vdsm/gluster/apiwrapper.py", line 85, in logicalVolumeList return self._gluster.logicalVolumeList() File "/usr/lib/python2.7/site-packages/vdsm/gluster/api.py", line 90, in wrapper rv = func(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/gluster/api.py", line 808, in logicalVolumeList status = self.svdsmProxy.glusterLogicalVolumeList() File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 55, in __call__ return callMethod() File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 52, in <lambda> getattr(self._supervdsmProxy._svdsm, self._funcName)(*args, AttributeError: 'AutoProxy[instance]' object has no attribute 'glusterLogicalVolumeList' 2018-06-25 06:03:26,107+0300 INFO (jsonrpc/0) [jsonrpc.JsonRpcServer] RPC call GlusterHost.logicalVolumeList failed (error -32603) in 0.00 seconds (__init__:573) There are no apparent affects of this on the operation of the servers though. Any idea why these are there?

3 3

Problem download disk
by Marcelo Leandro 27 Jun '18

27 Jun '18

Hello, I am use api java to download a disk but not was concluded , I have this error: The server response was 503 in the range request I need change anythings how timeout or size the download ? Very Thanks.

2 1

[ANN] oVirt 4.2.4 is now generally available
by Sandro Bonazzola 26 Jun '18

26 Jun '18

The oVirt Project is pleased to announce the general availability of oVirt 4.2.4 as of June 26th, 2018 This update is the fourth release in a series of stabilization updates to the 4.2 series. This release is available now for: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later * oVirt Node 4.2 See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance will be available in a few hours - oVirt Node will be available in a few hours [2] Additional Resources: * Read more about the oVirt 4.2.4 release highlights: http://www.ovirt.org/release/4.2.4/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.4/ [2] http://resources.ovirt.org/pub/ovirt-4.2/iso/ -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0

Failed to delete snapshot '<UNKNOWN>' for VM 'vmname'.
by nicolas＠devels.es 26 Jun '18

26 Jun '18

Hi, We're running oVirt 4.1.9, recently we had an issue with snapshots so we had to fix them manually. The issue is mostly solved but now we're seeing a lot of events like this one: 2018-06-25 07:58:06,637+01 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler6) [91430fc5-284d-4c26-8d8d-b7bf4053a7e4] EVENT_ID: USER_REMOVE_SNAPSHOT_FINISHED_FAILURE(357), Correlation ID: 91430fc5-284d-4c26-8d8d-b7bf4053a7e4, Job ID: da8120a4-9c6d-4379-ad67-a3808db1fd46, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Failed to delete snapshot '<UNKNOWN>' for VM 'vmname'. Which generates the following event in the manager: Failed to delete snapshot '<UNKNOWN>' for VM 'vmname'. This event is being generated every 10 seconds, so it's kind of annoying. Any way to remove it manually? It doesn't matter if it entails touching the DB directly. Thanks.

2 14

Import ova failed
by du_hongyu＠yeah.net 26 Jun '18

26 Jun '18

Hi, I make a OVA by "ovirt appliance", then import my ovirt cluster ,but here is trouble ovirt-engine 4.2.0 2018-06-26 15:55:51,032+0800 INFO (jsonrpc/3) [api.host] FINISH getExternalVmFromOva error=Error parsing ovf information: no memory size from=::ffff:192.168.100.48,37288, flow_id=29946b38-c3fc-4ade-80c6-4f304fa0faa7 (api:50) 2018-06-26 15:55:51,033+0800 ERROR (jsonrpc/3) [jsonrpc.JsonRpcServer] Internal server error (__init__:611) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 606, in _handle_request res = method(**params) File "/usr/lib/python2.7/site-packages/vdsm/rpc/Bridge.py", line 197, in _dynamicMethod result = fn(*methodArgs) File "<string>", line 2, in getExternalVmFromOva File "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 48, in method ret = func(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/API.py", line 1503, in getExternalVmFromOva return v2v.get_ova_info(ova_path) File "/usr/lib/python2.7/site-packages/vdsm/v2v.py", line 244, in get_ova_info _add_general_ovf_info(vm, root, ns, ova_path) File "/usr/lib/python2.7/site-packages/vdsm/v2v.py", line 1385, in _add_general_ovf_info raise V2VError('Error parsing ovf information: no memory size') V2VError: Error parsing ovf information: no memory size Regards Hongyu Du

1 0

Reg: Hosted-engine "vm not running on this host"
by syedquadeer＠ctel.in 26 Jun '18

26 Jun '18

Dear Team, We have setup of 3 node cluster with 3.4 version of ovirt, after node server restart, hosted engine showing as "vm not running on this host" on 2 nodes and it is running on only one node. Please find screen shot below, --== Host 1 status ==-- Status up-to-date : True Hostname : node2.ctelhyd.in Host ID : 1 Engine status : {"reason": "vm not running on this host", "health": "bad", "vm": "down", "detail": "unknown"} Score : 3400 stopped : False Local maintenance : False crc32 : 04c18d76 Host timestamp : 231158 --== Host 2 status ==-- Status up-to-date : True Hostname : node3.ctelhyd.in Host ID : 2 Engine status : {"reason": "vm not running on this host", "health": "bad", "vm": "down", "detail": "unknown"} Score : 3400 stopped : False Local maintenance : False crc32 : f0b6a1b2 Host timestamp : 231171 --== Host 3 status ==-- Status up-to-date : True Hostname : node1.ctelhyd.in Host ID : 3 Engine status : {"health": "good", "vm": "up", "detail": "up"} Score : 3400 stopped : False Local maintenance : False crc32 : 7ef5dd17 Host timestamp : 231223 Thanks & Regards, Syed Abdul Qadeer. 7660022818.

2 2

HE + Gluster : Engine corrupted?
by Hanson Turner 26 Jun '18

26 Jun '18

Hi Benny, Who should I be reaching out to for help with a gluster based hosted engine corruption? --== Host 1 status ==-- conf_on_shared_storage : True Status up-to-date : True Hostname : ovirtnode1.abcxyzdomains.net Host ID : 1 Engine status : {"reason": "failed liveliness check", "health": "bad", "vm": "up", "detail": "Up"} Score : 3400 stopped : False Local maintenance : False crc32 : 92254a68 local_conf_timestamp : 115910 Host timestamp : 115910 Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=115910 (Mon Jun 18 09:43:20 2018) host-id=1 score=3400 vm_conf_refresh_time=115910 (Mon Jun 18 09:43:20 2018) conf_on_shared_storage=True maintenance=False state=GlobalMaintenance stopped=False My when I VNC into my HE, All I get is: Probing EDD (edd=off to disable)... ok So, that's why it's failing the liveliness check... I cannot get the screen on HE to change short of ctl-alt-del which will reboot the HE. I do have backups for the HE that are/were run on a nightly basis. If the cluster was left alone, the HE vm would bounce from machine to machine trying to boot. This is why the cluster is in maintenance mode. One of the nodes was down for a period of time and brought back, sometime through the night, which is when the automated backup kicks, the HE started bouncing around. Got nearly 1000 emails. This seems to be the same error (but may not be the same cause) as listed here: https://bugzilla.redhat.com/show_bug.cgi?id=1569827 Thanks, Hanson

4 3

oVirt Engine 4.1 with oVirt Node 4.2
by stefanos＠prismatelecomtesting.com 25 Jun '18

25 Jun '18

Hi, I would like to know if oVirt 4.1 can manage 4.2 hosts just like RHVM does. precisely, can oVirt 4.1 manage: - an oVirt Node 4.2 with a cluster compatibility of 4.1? - a CentOS host with 4.2 repo with a cluster compatibility of 4.1? Thank you, -- Stefano Stagnaro Prisma Telecom Testing S.r.l. Via Petrocchi, 4 20127 Milano – Italy Tel. 02 26113507 int 339 e-mail: stefanos at prismatelecomtesting.com skype: stefano.stagnaro

1 0

engine
by du_hongyu＠yeah.net 25 Jun '18

25 Jun '18

Hi I export OVA from my ovirt , then want to import the OVA to anther ovirt, but this is failed 2018-06-25 13:52:03,836+08 INFO [org.ovirt.engine.core.bll.exportimport.ConvertVmCallback] (EE-ManagedThreadFactory-engineScheduled-Thread-94) [5c66b700] Conversion of VM from external environment failed: Job u'7ef7bff2-5766-4f38-ac28-cdd9da4c407c' process failed exit-code: 1 Regards Hongyu Du

2 15

unable to create iSCSI storage domain
by Bernhard Dick 25 Jun '18

25 Jun '18

Hi, I've a problem creating an iSCSI storage domain. My hosts are running the current ovirt 4.2 engine-ng version. I can detect and login to the iSCSI targets, but I cannot see any LUNs (on the LUNs > Targets page). That happens with our storage and with a linux based iSCSI target which I created for testing purposes. When I logon to the ovirt hosts I see that they are connected with the target LUNs (dmesg is telling that there are iscsi devices being found and they are getting assigned to devices in /dev/sdX ). Writing and reading from the devices (also accros hosts) works. Do you have some advice how to troubleshoot this? Regards Bernhard

3 5

snapshot going to locked state and stays with it
by Hari Prasanth Loganathan 25 Jun '18

25 Jun '18

Hi Team, I took a snapshot using oVirt and it stays in the LOCKED state for half an hour. DateJun 25, 2018, 1:06:58 PMStatus*LOCKED*MemoryfalseDescription Immediate2018625-13655Defined Memory1024MBPhysical Memory Guaranteed1024MBNumber of CPU Cores1 (1:1:1) 1) What could be the reason for this LOCKED state? 2) How can I recover from it? Thanks, Hari

2 3

OVirt SHE deployment failed - 4.2.2 / 4.2.3
by jeanbaptiste＠nfrance.com 25 Jun '18

25 Jun '18

Hello List 😊 I’m facing an issue regarding Self Hosted Engine appliance deployment on OVirt 4.2( tested on 4.2.2 and 4.2.3). During setup tool, I’m unable to mount a remote storage NFS / iSCSI. When I try to mount an NFS share: [ INFO ] TASK [Remove host-deploy configuration file] [ INFO ] changed: [localhost] Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs)[nfs]: nfs Please specify the nfs version you would like to use (auto, v3, v4, v4_1)[auto]: xxxxxx:/YYYYYY [ ERROR ] Invalid value Please specify the nfs version you would like to use (auto, v3, v4, v4_1)[auto]: Please specify the full shared storage connection path to use (example: host:/path): xxxxxx:/YYYYYY If needed, specify additional mount options for the connection to the hosted-engine storagedomain []: [ INFO ] Creating Storage Domain [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Check local VM dir stat] [ INFO ] ok: [localhost] [ INFO ] TASK [Enforce local VM dir existence] [ INFO ] skipping: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Obtain SSO token using username/password credentials] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch host facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch cluster ID] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch cluster facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch Datacenter facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch Datacenter ID] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch Datacenter name] [ INFO ] ok: [localhost] [ INFO ] TASK [Add NFS storage domain] [ ERROR ] Verify permission settings on the specified storage path.]". HTTP response code is 400. [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Permission settings on the specified path do not allow access to the storage.\nVerify permission settings on the specified storage path.]\". HTTP response code is 400."} When I try to mount an iSCSI LUN: Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs)[nfs]: iscsi Please specify the iSCSI portal IP address: XXXXXX Please specify the iSCSI portal port [3260]: Please specify the iSCSI discover user: Please specify the iSCSI discover password: Please specify the iSCSI portal login user: Please specify the iSCSI portal login password: [ INFO ] Discovering iSCSI targets [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Obtain SSO token using username/password credentials] [ INFO ] ok: [localhost] [ INFO ] TASK [Prepare iSCSI parameters] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch host facts] [ INFO ] ok: [localhost] [ INFO ] TASK [iSCSI discover with REST API] [ INFO ] ok: [localhost] The following targets have been found: [1] iqn.1992-04.com.emc:cx.aaaaaaaaaaaaaaaaa TPGT: 7, portals: XXXXXXX:3260 [2] iqn.1992-04.com.emc:cx. aaaaaaaaaaaaaaaab TPGT: 6, portals: XXXXXXX:3260 [3] iqn.1992-04.com.emc:cx. aaaaaaaaaaaaaaaac TPGT: 8, portals: XXXXXX:3260 [4] iqn.1992-04.com.emc:cx. aaaaaaaaaaaaaaaad TPGT: 5, portals: XXXXXXX:3260 Please select a target (1, 2, 3, 4) [1]: 4 [ INFO ] Getting iSCSI LUNs list [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Obtain SSO token using username/password credentials] [ INFO ] ok: [localhost] [ INFO ] TASK [iSCSI login] [ INFO ] TASK [Get iSCSI LUNs] [ INFO ] ok: [localhost] The following luns have been found on the requested target: [1] 36006016045004300897d2b5bdfea8478 200GiB DGC VRAID status: free, paths: 1 active Please select the destination LUN (1) [1]: 1 [ INFO ] iSCSI discard after delete is disabled [ INFO ] Creating Storage Domain [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Check local VM dir stat] [ INFO ] ok: [localhost] [ INFO ] TASK [Enforce local VM dir existence] [ INFO ] skipping: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Obtain SSO token using username/password credentials] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch host facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch cluster ID] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch cluster facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch Datacenter facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch Datacenter ID] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch Datacenter name] [ INFO ] ok: [localhost] [ INFO ] TASK [Add NFS storage domain] [ INFO ] skipping: [localhost] [ INFO ] TASK [Add glusterfs storage domain] [ INFO ] skipping: [localhost] [ INFO ] TASK [Add iSCSI storage domain] [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[Network error during communication with the Host.]". HTTP response code is 400. [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Network error during communication with the Host.]\". HTTP response code is 400."} Some unnecessary informations like IP or IQN were hidden I’m pretty disturbed since iSCSI issue seem resoled since 4.2.2 release: https://bugzilla.redhat.com/show_bug.cgi?id=1529226 Did you have same issue to deploy SHE since 4.2* ? ovirt-hosted-engine-setup seems not working has expected Regards, Jean-Baptiste,

2 1

rhgs 3.3.1 rhev 4.2 vdsm gluster host deploy fails with no real indication of an error, looks like a network error
by Dan Lavu 25 Jun '18

25 Jun '18

Hello, Seeing some odd behavior deploying a host to a gluster cluster on rhev 4.2 running rhgs 3.3.1. The host failed to be added to the cluster and there are no real errors in the host deploy logs. Upon further investigation it looks like its failing network host checks. The interfaces gets added to the host when trying to configure host networks, but fails even though everything seems routable. These are the main errors I can see that might be causing an issue. *Jun 24 20:27:12 deadpool.glstr.runlevelone.lan daemonAdapter[17160]: libvirt: Network Driver error : Network not found: no network with matching name 'vdsm-ovirtmgmt'* *Jun 24 20:27:12 deadpool.glstr.runlevelone.lan daemonAdapter[17160]: libvirt: Network Driver error : Network not found: no network with matching name 'vdsm-infiniband'* Fails connectivity check. *Jun 24 20:27:21 deadpool.glstr.runlevelone.lan vdsm[17316]: vdsm vds ERROR connectivity check failed* * Traceback (most recent call last):* * File "/usr/share/vdsm/API.py", line 1650, in _rollback* * yield rollbackCtx* * File "/usr/share/vdsm/API.py", line 1502, in setupNetworks* * supervdsm.getProxy().setupNetworks(networks, bondings, options)* * File "/usr/share/vdsm/supervdsm.py", line 50, in __call__* * return callMethod()* * File "/usr/share/vdsm/supervdsm.py", line 48, in <lambda>* * **kwargs)* * File "<string>", line 2, in setupNetworks* * File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in _callmethod* * raise convert_to_error(kind, result)* * ConfigNetworkError: (10, 'connectivity check failed')* Fulls logs can be found here, https://paste.fedoraproject.org/paste/9v7DL2uCl2EcRnduliChsQ Any help is appreciated, also let me know if I need to file a bug. Thanks, Dan

2 1

private networking question
by Matthew Wimpelberg 24 Jun '18

24 Jun '18

Hi, I'm currently running oVirt with a self hosted engine configuration on an Intel NUC. All of my VMs are on my home 192.168.1.0/24 network, but I want to set up a completely isolated network like VirtualBox has (https://blogs.oracle.com/scoter/virtualbox-host-only) The NUC that I have only has one NIC so I think I'll have to set up a dummy interface of some kind. I tried that with the below example. I couldn't find a good guide or doc on this. Can someone please assist? [root@host ~]# cat /etc/sysconfig/network-scripts/ifcfg-dummy0 DEVICE=dummy0 BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no PROMISC=yes 3: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master vnet0 state UNKNOWN group default qlen 1000 link/ether 52:54:00:7e:27:af brd ff:ff:ff:ff:ff:ff inet6 fe80::5054:ff:fe7e:27af/64 scope link valid_lft forever preferred_lft forever Sent with [ProtonMail](https://protonmail.com) Secure Email.

2 2

vGPU setup guide
by Callum Smith 24 Jun '18

24 Jun '18

Dear All, IS this the most current and useful example of implenting vGPUs in oVirt? I had understood that 4.2 had NVIDIA GRID support as a flagship feature, but this appears to be 4.1.4? It seems a very reasonable and decent guide, just don't want to go down this route if there's alternatives now available in 4.2.x. https://mpolednik.github.io/2017/09/13/vgpu-in-ovirt/ Regards, Callum -- Callum Smith Research Computing Core Wellcome Trust Centre for Human Genetics University of Oxford e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk>

3 7

Fwd: vGPU VM not starting
by Ales Musil 24 Jun '18

24 Jun '18

On Thu, May 17, 2018 at 12:01 AM, Callum Smith <callum(a)well.ox.ac.uk> wrote: > Dear All, > > Our vGPU installation is progressing, though the VM is failing to start. > > 2018-05-16 22:57:34,328+0100 ERROR (vm/1bc9dae8) [virt.vm] > (vmId='1bc9dae8-a0ea-44b3-9103-5805100648d0') The vm start process failed > (vm:943) > Traceback (most recent call last): > File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 872, in > _startUnderlyingVm > self._run() > File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2872, in > _run > dom.createWithFlags(flags) > File "/usr/lib/python2.7/site-packages/vdsm/common/libvirtconnection.py", > line 130, in wrapper > ret = f(*args, **kwargs) > File "/usr/lib/python2.7/site-packages/vdsm/common/function.py", line > 92, in wrapper > return func(inst, *args, **kwargs) > File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1099, in > createWithFlags > if ret == -1: raise libvirtError ('virDomainCreateWithFlags() failed', > dom=self) > libvirtError: Cannot get interface MTU on '': No such device > > That's the specific error, some other information. It seems the GPU > 'allocation' of uuid against the nvidia-xx mdev type is proceeding > correctly, and the device is being created by the VM instantiation but the > VM does not succeed in going up with this error. Any other logs or > information relevant to help diagnose? > > Regards, > Callum > > -- > > Callum Smith > Research Computing Core > Wellcome Trust Centre for Human Genetics > University of Oxford > e. callum(a)well.ox.ac.uk > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > > Hi Callum, can you share your version of the setup? Also do you use OVS switch type in the cluster? Regards, Ales. -- ALES MUSIL INTERN - rhv network Red Hat EMEA <https://www.redhat.com/> amusil(a)redhat.com IM: amusil <https://red.ht/sig>

6 14

Missing step(s) after custom x509 certificates
by John Florian 24 Jun '18

24 Jun '18

I followed the docs at https://www.ovirt.org/documentation/admin-guide/appe-oVirt_and_SSL/ and all works well from the usual web portal. Went to test moVirt and ran into a snag. It wants to download the CA using http://fqdn/ovirt-engine/services/pki-resource?resource=ca-certificate&form…, but that's grabbing the old CA issued by the engine rather than my custom CA. What else needs to be changed? I'm sure I can finagle my way to a fix here by telling moVirt to use a custom URL or file, but this looks like a bug in the docs that would probably best be fixed. -- John Florian

4 9

disk performance findings
by william.dossett＠gmail.com 24 Jun '18

24 Jun '18

I have deployed a HCI environment several times now as I wanted to get some idea of disk performance with Gluster/ On a Dell R720 3 node cluster with H710 PERC controller and 8 x 2TB 7200 RPM SATA drives. My first test was with the 8 drives configured as H/W RAID 6 and I configured Gluster as RAID 6 - quite a lot of redundancy but that was just my first deployment Running IOMeter for 24 hours using all in one access specification I got 240 IOPs. Pretty good for SATA drives. I then broke the RAID and configured 8 virtual disks, one per physical and then deployed Gluster as JBOD - I am not sure how resilient that is, but I assume in a 3 node cluster failures to tolerate would be one. This gave me 267 IOPs. I don't know that much about the internals of Gluster, but when I first asked about this there didn't seem to be much knowledge of what configuration would be best for HCI. I plan to do more research and tests on this, but for what its worth for now, I am going down the JBOD route with no H/W RAID. Regards Bill

2 1

Restore and rename engine
by Staniforth, Paul 23 Jun '18

23 Jun '18

Hello, I have been trying to test our system by restoring from backup to a new machine and running ovirt-engine-rename, then engine-setup. I get to sent back to the main oVirt Web page from any of the portals, which has an Warning triangle saying the engine is initializing. and in the URL it has ovirt-engine/?error_description=server_error%3A+%2Fetc%2Fpki%2Fjava%2Fcacerts+(No+such+file+or+directory)&error=server_error The original machine had a certificate signed by an external authority. I tried putting back the link from apache-ca.pem to ca.pem, the original apache.key.nopass, websocket-proxy.key.nopass as well as hte key files. I upgraded from 4.1.9 to 4.2.3 and it says it is resigning the certificates but still fails. Regards, Paul S. To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html

1 1

quick way to start glusterfs managed engine over?
by william.dossett＠gmail.com 23 Jun '18

23 Jun '18

I have successfully got glusterfs playbook to finish once and then my networking was wrong on the managed engine and on the hosts, so I started over. Now I can't seem to even get that far again. I completely reloaded the hosts, but that takes a while. Last time glusterfs failed right at the end with "host is not in 'Peer in Cluster' state" Redeploying fails as partitions already exist. I am deploying to /dev/sdb Is there a quick way to get /dev/sdb back into a state to redeploy to? I think I got there once by doing pvremove and gdisk zap gpt, but not sure if that worked or caused problem on the redeploy. Its very time consuming to start over from scratch, so would appreciate if there is any shortcut instead of reloading the OS. Thans Bill

2 2

Export as OVA failed
by du_hongyu＠yeah.net 22 Jun '18

22 Jun '18

Hi I want to export my vm, I shutdown my vm, then from the three-dot dropdown select "Export as OVA" but /var/log/ovirt-engine/engine.log has Exception fail. Regards Hongyu Du

2 5

OVirt SHE deployment failed - 4.2.2 / 4.2.3
by jeanbaptiste.coupiac＠nfrance.com 22 Jun '18

22 Jun '18

Hello List 😊 I’m facing an issue regarding Self Hosted Engine appliance deployment on OVirt 4.2( tested on 4.2.2 and 4.2.3). During setup tool, I’m unable to mount a remote storage NFS / iSCSI. When I try to mount an NFS share: [ INFO ] TASK [Remove host-deploy configuration file] [ INFO ] changed: [localhost] Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs)[nfs]: nfs Please specify the nfs version you would like to use (auto, v3, v4, v4_1)[auto]: xxxxxx:/YYYYYY [ ERROR ] Invalid value Please specify the nfs version you would like to use (auto, v3, v4, v4_1)[auto]: Please specify the full shared storage connection path to use (example: host:/path): xxxxxx:/YYYYYY If needed, specify additional mount options for the connection to the hosted-engine storagedomain []: [ INFO ] Creating Storage Domain [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Check local VM dir stat] [ INFO ] ok: [localhost] [ INFO ] TASK [Enforce local VM dir existence] [ INFO ] skipping: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Obtain SSO token using username/password credentials] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch host facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch cluster ID] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch cluster facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch Datacenter facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch Datacenter ID] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch Datacenter name] [ INFO ] ok: [localhost] [ INFO ] TASK [Add NFS storage domain] [ ERROR ] Verify permission settings on the specified storage path.]". HTTP response code is 400. [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Permission settings on the specified path do not allow access to the storage.\nVerify permission settings on the specified storage path.]\". HTTP response code is 400."} When I try to mount an iSCSI LUN: Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs)[nfs]: iscsi Please specify the iSCSI portal IP address: XXXXXX Please specify the iSCSI portal port [3260]: Please specify the iSCSI discover user: Please specify the iSCSI discover password: Please specify the iSCSI portal login user: Please specify the iSCSI portal login password: [ INFO ] Discovering iSCSI targets [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Obtain SSO token using username/password credentials] [ INFO ] ok: [localhost] [ INFO ] TASK [Prepare iSCSI parameters] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch host facts] [ INFO ] ok: [localhost] [ INFO ] TASK [iSCSI discover with REST API] [ INFO ] ok: [localhost] The following targets have been found: [1] iqn.1992-04.com.emc:cx.aaaaaaaaaaaaaaaaa TPGT: 7, portals: XXXXXXX:3260 [2] iqn.1992-04.com.emc:cx. aaaaaaaaaaaaaaaab TPGT: 6, portals: XXXXXXX:3260 [3] iqn.1992-04.com.emc:cx. aaaaaaaaaaaaaaaac TPGT: 8, portals: XXXXXX:3260 [4] iqn.1992-04.com.emc:cx. aaaaaaaaaaaaaaaad TPGT: 5, portals: XXXXXXX:3260 Please select a target (1, 2, 3, 4) [1]: 4 [ INFO ] Getting iSCSI LUNs list [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Obtain SSO token using username/password credentials] [ INFO ] ok: [localhost] [ INFO ] TASK [iSCSI login] [ INFO ] TASK [Get iSCSI LUNs] [ INFO ] ok: [localhost] The following luns have been found on the requested target: [1] 36006016045004300897d2b5bdfea8478 200GiB DGC VRAID status: free, paths: 1 active Please select the destination LUN (1) [1]: 1 [ INFO ] iSCSI discard after delete is disabled [ INFO ] Creating Storage Domain [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Check local VM dir stat] [ INFO ] ok: [localhost] [ INFO ] TASK [Enforce local VM dir existence] [ INFO ] skipping: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Obtain SSO token using username/password credentials] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch host facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch cluster ID] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch cluster facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch Datacenter facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch Datacenter ID] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch Datacenter name] [ INFO ] ok: [localhost] [ INFO ] TASK [Add NFS storage domain] [ INFO ] skipping: [localhost] [ INFO ] TASK [Add glusterfs storage domain] [ INFO ] skipping: [localhost] [ INFO ] TASK [Add iSCSI storage domain] [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[Network error during communication with the Host.]". HTTP response code is 400. [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Network error during communication with the Host.]\". HTTP response code is 400."} Some unnecessary informations like IP or IQN were hidden I’m pretty disturbed since iSCSI issue seem resoled since 4.2.2 release: https://bugzilla.redhat.com/show_bug.cgi?id=1529226 Did you have same issue to deploy SHE since 4.2* ? ovirt-hosted-engine-setup seems not working has expected Regards, Jean-Baptiste,

1 0

oVirt export VM as OVA
by du_hongyu＠yeah.net 22 Jun '18

22 Jun '18

Hi I want to export my vm by "Eports as OVA", but i don't know what to write in Directory? Regards Hongyu Du

2 1

Ignore extra parameters in oVirt API
by Hari Prasanth Loganathan 22 Jun '18

22 Jun '18

Hi Team, I want to attach the disk using the oVIrt rest API, I use the version* 4.2* and completed my script. But when I downgrade my oVirt to lower version *4.1*, I get the following error. detail: 'For correct usage, see: https://X.X.99.84/ovirt-engine/api/v4/model#services/disk-attachments/metho…',\n reason: 'Request syntactically incorrect.',\n error: 'For correct usage, see: https://X.X.99.84/ovirt-engine/api/v4/model#services/disk-attachments/metho… ',\n *Reason*: I added an extra parameter called 'isSharable' which is not expected in this API. *So Is there a way to Ignore the extra parameters sent for oVirt API?* *Example :* *Expected :* *{* * "a" : "1"* *}* *I sent :* *{* * "a" : "1",* * "b" : "2"* *}* *My expectation is, Ignore the "b" and the API should work, Is there a flag in oVirt API which ignores the extra parameters? * Thanks, Hari

3 13

Failed to execute stage 'Misc configuration': Command '/sbin/service' failed to execute
by patrickstar12358＠hotmail.com 22 Jun '18

22 Jun '18

Hi man,I wanna to install ovirt 3.5 via allinone deploy,but I encoutered some issues. stage: #yum update \\ I set some enviroment parameters like as: hostname,static ip ...etc #yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm \\Skipped "yum install -y ovirt-engine" #yum install -y ovirt-engine-setup-plugin-allinone #engine-setup [ INFO ] Stage: Setup validation [WARNING] Less than 16384MB of memory is available --== CONFIGURATION PREVIEW ==-- Application mode : both Update Firewall : False Host FQDN : node.luccitech.com Engine database name : engine Engine database secured connection : False Engine database host : localhost Engine database user name : engine Engine database host name validation : False Engine database port : 5432 Engine installation : True PKI organization : luccitech.com Configure VDSM on this host : True Local storage domain directory : /var/lib/images Configure local Engine database : True Set application as default page : True Configure Apache SSL : True Reports installation : False Configure local Reports database : False Engine Host FQDN : node.luccitech.com Configure WebSocket Proxy : True Please confirm installation settings (OK, Cancel) [OK]: [ INFO ] Stage: Transaction setup [ INFO ] Stopping reports service [ INFO ] Stopping engine service [ INFO ] Stopping ovirt-fence-kdump-listener service [ INFO ] Stopping websocket-proxy service [ INFO ] Stage: Misc configuration [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Creating PostgreSQL 'engine' database [ ERROR ] Failed to execute stage 'Misc configuration': Command '/sbin/service' failed to execute [ INFO ] Yum Performing yum transaction rollback [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20180621172148-ojd6fg.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20180621172411-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed I have no idea to deal it... Best regard.

3 2

Re: Failed to update VMs/Templates OVF data, cannot change SPM
by Albl, Oliver 21 Jun '18

21 Jun '18

Hi all, does anybody have an idea how to address this? There is also a side effect that I cannot change SPM ("Error while executing action: Cannot force select SPM. The Storage Pool has running tasks."). All the best, Oliver Von: Albl, Oliver Gesendet: Mittwoch, 13. Juni 2018 12:32 An: users(a)ovirt.org Betreff: Failed to update VMs/Templates OVF data Hi, I have a FC storage domain reporting the following messages every hour: VDSM command SetVolumeDescriptionVDS failed: Could not acquire resource. Probably resource factory threw an exception.: () Failed to update OVF disks cb04b55c-10fb-46fe-b9de-3c133a94e6a5, OVF data isn't updated on those OVF stores (Data Center VMTEST, Storage Domain VMHOST_LUN_62). Failed to update VMs/Templates OVF data for Storage Domain VMHOST_LUN_62 in Data Center VMTEST. Trying to manually update OVF results in "Error while executing action UpdateOvfStoreForStorageDomain: Internal Engine Error" I run oVirt 4.2.3.5-1.el7.centos on CentOS 7.5 (3.10.0-862.3.2.el7.x86_64) with vdsm-4.20.27.1-1.el7.centos.x86_64 Engine log: 2018-06-13 12:15:35,649+02 WARN [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] (default task-12) [092d8f27-c0a4-4d78-a8cb-f4738aff71e6] The message key 'UpdateOvfStoreForStorageDomain' is missing from 'bundles/ExecutionMessages' 2018-06-13 12:15:35,655+02 INFO [org.ovirt.engine.core.bll.storage.domain.UpdateOvfStoreForStorageDomainCommand] (default task-12) [092d8f27-c0a4-4d78-a8cb-f4738aff71e6] Lock Acquired to object 'EngineLock:{exclusiveLocks='[3edb5295-3797-4cd0-9b43-f46ec1ee7b14=OVF_UPDATE, 373efd46-8aea-4d0e-96cc-1da0debf72d0=STORAGE]', sharedLocks=''}' 2018-06-13 12:15:35,660+02 INFO [org.ovirt.engine.core.bll.storage.domain.UpdateOvfStoreForStorageDomainCommand] (default task-12) [092d8f27-c0a4-4d78-a8cb-f4738aff71e6] Running command: UpdateOvfStoreForStorageDomainCommand internal: false. Entities affected : ID: 373efd46-8aea-4d0e-96cc-1da0debf72d0 Type: StorageAction group MANIPULATE_STORAGE_DOMAIN with role type ADMIN 2018-06-13 12:15:35,670+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStoragePoolCommand] (default task-12) [4fd5b59a] Running command: ProcessOvfUpdateForStoragePoolCommand internal: true. Entities affected : ID: 3edb5295-3797-4cd0-9b43-f46ec1ee7b14 Type: StoragePool 2018-06-13 12:15:35,674+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStoragePoolCommand] (default task-12) [4fd5b59a] Attempting to update VM OVFs in Data Center 'VMTEST' 2018-06-13 12:15:35,678+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStoragePoolCommand] (default task-12) [4fd5b59a] Successfully updated VM OVFs in Data Center 'VMTEST' 2018-06-13 12:15:35,678+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStoragePoolCommand] (default task-12) [4fd5b59a] Attempting to update template OVFs in Data Center 'VMTEST' 2018-06-13 12:15:35,678+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStoragePoolCommand] (default task-12) [4fd5b59a] Successfully updated templates OVFs in Data Center 'VMTEST' 2018-06-13 12:15:35,678+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStoragePoolCommand] (default task-12) [4fd5b59a] Attempting to remove unneeded template/vm OVFs in Data Center 'VMTEST' 2018-06-13 12:15:35,680+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStoragePoolCommand] (default task-12) [4fd5b59a] Successfully removed unneeded template/vm OVFs in Data Center 'VMTEST' 2018-06-13 12:15:35,684+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStoragePoolCommand] (default task-12) [4fd5b59a] Lock freed to object 'EngineLock:{exclusiveLocks='[3edb5295-3797-4cd0-9b43-f46ec1ee7b14=OVF_UPDATE, 373efd46-8aea-4d0e-96cc-1da0debf72d0=STORAGE]', sharedLocks=''}' 2018-06-13 12:15:35,704+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStorageDomainCommand] (default task-12) [24485c23] Lock Acquired to object 'EngineLock:{exclusiveLocks='[]', sharedLocks='[3edb5295-3797-4cd0-9b43-f46ec1ee7b14=OVF_UPDATE]'}' 2018-06-13 12:15:35,714+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStorageDomainCommand] (default task-12) [24485c23] Running command: ProcessOvfUpdateForStorageDomainCommand internal: true. Entities affected : ID: 373efd46-8aea-4d0e-96cc-1da0debf72d0 Type: StorageAction group MANIPULATE_STORAGE_DOMAIN with role type ADMIN 2018-06-13 12:15:35,724+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] START, SetVolumeDescriptionVDSCommand( SetVolumeDescriptionVDSCommandParameters:{storagePoolId='3edb5295-3797-4cd0-9b43-f46ec1ee7b14', ignoreFailoverLimit='false', storageDomainId='373efd46-8aea-4d0e-96cc-1da0debf72d0', imageGroupId='cb04b55c-10fb-46fe-b9de-3c133a94e6a5', imageId='a1e7554d-530c-4c07-a4b5-459a1c509e39'}), log id: 747d674f 2018-06-13 12:15:35,724+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] -- executeIrsBrokerCommand: calling 'setVolumeDescription', parameters: 2018-06-13 12:15:35,724+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] ++ spUUID=3edb5295-3797-4cd0-9b43-f46ec1ee7b14 2018-06-13 12:15:35,724+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] ++ sdUUID=373efd46-8aea-4d0e-96cc-1da0debf72d0 2018-06-13 12:15:35,724+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] ++ imageGroupGUID=cb04b55c-10fb-46fe-b9de-3c133a94e6a5 2018-06-13 12:15:35,724+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] ++ volUUID=a1e7554d-530c-4c07-a4b5-459a1c509e39 2018-06-13 12:15:35,724+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] ++ description={"Updated":false,"Last Updated":"Thu May 24 12:02:22 CEST 2018","Storage Domains":[{"uuid":"373efd46-8aea-4d0e-96cc-1da0debf72d0"}],"Disk Description":"OVF_STORE"} 2018-06-13 12:15:35,827+02 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] Failed in 'SetVolumeDescriptionVDS' method 2018-06-13 12:15:35,831+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-12) [24485c23] EVENT_ID: IRS_BROKER_COMMAND_FAILURE(10,803), VDSM command SetVolumeDescriptionVDS failed: Could not acquire resource. Probably resource factory threw an exception.: () 2018-06-13 12:15:35,831+02 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] Command 'SetVolumeDescriptionVDSCommand( SetVolumeDescriptionVDSCommandParameters:{storagePoolId='3edb5295-3797-4cd0-9b43-f46ec1ee7b14', ignoreFailoverLimit='false', storageDomainId='373efd46-8aea-4d0e-96cc-1da0debf72d0', imageGroupId='cb04b55c-10fb-46fe-b9de-3c133a94e6a5', imageId='a1e7554d-530c-4c07-a4b5-459a1c509e39'})' execution failed: IRSGenericException: IRSErrorException: Failed to SetVolumeDescriptionVDS, error = Could not acquire resource. Probably resource factory threw an exception.: (), code = 855 2018-06-13 12:15:35,831+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] FINISH, SetVolumeDescriptionVDSCommand, log id: 747d674f 2018-06-13 12:15:35,831+02 WARN [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStorageDomainCommand] (default task-12) [24485c23] failed to update domain '373efd46-8aea-4d0e-96cc-1da0debf72d0' ovf store disk 'cb04b55c-10fb-46fe-b9de-3c133a94e6a5' 2018-06-13 12:15:35,834+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-12) [24485c23] EVENT_ID: UPDATE_FOR_OVF_STORES_FAILED(1,016), Failed to update OVF disks cb04b55c-10fb-46fe-b9de-3c133a94e6a5, OVF data isn't updated on those OVF stores (Data Center VMTEST, Storage Domain HOST_LUN_62). 2018-06-13 12:15:35,843+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-12) [24485c23] EVENT_ID: UPDATE_OVF_FOR_STORAGE_DOMAIN_FAILED(190), Failed to update VMs/Templates OVF data for Storage Domain VMHOST_LUN_62 in Data Center VMTEST. 2018-06-13 12:15:35,846+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStorageDomainCommand] (default task-12) [24485c23] Lock freed to object 'EngineLock:{exclusiveLocks='[]', sharedLocks='[3edb5295-3797-4cd0-9b43-f46ec1ee7b14=OVF_UPDATE]'}' 2018-06-13 12:15:36,031+02 INFO [org.ovirt.engine.core.bll.SerialChildCommandsExecutionCallback] (EE-ManagedThreadFactory-engineScheduled-Thread-60) [24485c23] Command 'ProcessOvfUpdateForStorageDomain' id: 'a887910e-39a1-4120-a29b-76741ade8bf6' child commands '[]' executions were completed, status 'SUCCEEDED' 2018-06-13 12:15:37,052+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStorageDomainCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-31) [24485c23] Ending command 'org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStorageDomainCommand' successfully. 2018-06-13 12:15:37,059+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-31) [24485c23] EVENT_ID: USER_UPDATE_OVF_STORE(199), OVF_STORE for domain VMHOST_LUN_62 was updated by <user>@>domain>@<DOMAIN>-authz. vdsm.log 2018-06-13 12:15:35,727+0200 INFO (jsonrpc/7) [vdsm.api] START setVolumeDescription(sdUUID=u'373efd46-8aea-4d0e-96cc-1da0debf72d0', spUUID=u'3edb5295-3797-4cd0-9b43-f46ec1ee7b14', imgUUID=u'cb04b55c-10fb-46fe-b9de-3c133a94e6a5', volUU ID=u'a1e7554d-530c-4c07-a4b5-459a1c509e39', description=u'{"Updated":false,"Last Updated":"Thu May 24 12:02:22 CEST 2018","Storage Domains":[{"uuid":"373efd46-8aea-4d0e-96cc-1da0debf72d0"}],"Disk Description":"OVF_STORE"}', options=Non e) from=::ffff:<IP>,54686, flow_id=24485c23, task_id=70941873-0296-4ed0-94c8-b51290cd6963 (api:46) 2018-06-13 12:15:35,825+0200 WARN (jsonrpc/7) [storage.ResourceManager] Resource factory failed to create resource '01_img_373efd46-8aea-4d0e-96cc-1da0debf72d0.cb04b55c-10fb-46fe-b9de-3c133a94e6a5'. Canceling request. (resourceManager :543) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/storage/resourceManager.py", line 539, in registerResource obj = namespaceObj.factory.createResource(name, lockType) File "/usr/lib/python2.7/site-packages/vdsm/storage/resourceFactories.py", line 193, in createResource lockType) File "/usr/lib/python2.7/site-packages/vdsm/storage/resourceFactories.py", line 122, in __getResourceCandidatesList imgUUID=resourceName) File "/usr/lib/python2.7/site-packages/vdsm/storage/image.py", line 206, in getChain if len(uuidlist) == 1 and srcVol.isShared(): File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line 1434, in isShared return self._manifest.isShared() File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line 141, in isShared return self.getVolType() == sc.type2name(sc.SHARED_VOL) File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line 134, in getVolType self.voltype = self.getMetaParam(sc.VOLTYPE) File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line 118, in getMetaParam meta = self.getMetadata() File "/usr/lib/python2.7/site-packages/vdsm/storage/blockVolume.py", line 112, in getMetadata md = VolumeMetadata.from_lines(lines) File "/usr/lib/python2.7/site-packages/vdsm/storage/volumemetadata.py", line 103, in from_lines "Missing metadata key: %s: found: %s" % (e, md)) MetaDataKeyNotFoundError: Meta Data key not found error: ("Missing metadata key: 'DOMAIN': found: {}",) 2018-06-13 12:15:35,825+0200 WARN (jsonrpc/7) [storage.ResourceManager.Request] (ResName='01_img_373efd46-8aea-4d0e-96cc-1da0debf72d0.cb04b55c-10fb-46fe-b9de-3c133a94e6a5', ReqID='dc9ebbc2-5cfa-447d-b2be-40ed2cf81992') Tried to cancel a processed request (resourceManager:187) 2018-06-13 12:15:35,825+0200 INFO (jsonrpc/7) [vdsm.api] FINISH setVolumeDescription error=Could not acquire resource. Probably resource factory threw an exception.: () from=::ffff:<IP>,54686, flow_id=24485c23, task_id=70941873 -0296-4ed0-94c8-b51290cd6963 (api:50) 2018-06-13 12:15:35,825+0200 ERROR (jsonrpc/7) [storage.TaskManager.Task] (Task='70941873-0296-4ed0-94c8-b51290cd6963') Unexpected error (task:875) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 882, in _run return fn(*args, **kargs) File "<string>", line 2, in setVolumeDescription File "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 48, in method ret = func(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/storage/hsm.py", line 1294, in setVolumeDescription pool.setVolumeDescription(sdUUID, imgUUID, volUUID, description) File "/usr/lib/python2.7/site-packages/vdsm/storage/securable.py", line 79, in wrapper return method(self, *args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/storage/sp.py", line 2011, in setVolumeDescription with rm.acquireResource(img_ns, imgUUID, rm.EXCLUSIVE): File "/usr/lib/python2.7/site-packages/vdsm/storage/resourceManager.py", line 1025, in acquireResource return _manager.acquireResource(namespace, name, lockType, timeout=timeout) File "/usr/lib/python2.7/site-packages/vdsm/storage/resourceManager.py", line 475, in acquireResource raise se.ResourceAcqusitionFailed() ResourceAcqusitionFailed: Could not acquire resource. Probably resource factory threw an exception.: () 2018-06-13 12:15:35,826+0200 INFO (jsonrpc/7) [storage.TaskManager.Task] (Task='70941873-0296-4ed0-94c8-b51290cd6963') aborting: Task is aborted: u'Could not acquire resource. Probably resource factory threw an exception.: ()' - code 100 (task:1181) 2018-06-13 12:15:35,826+0200 ERROR (jsonrpc/7) [storage.Dispatcher] FINISH setVolumeDescription error=Could not acquire resource. Probably resource factory threw an exception.: () (dispatcher:82) 2018-06-13 12:15:35,826+0200 INFO (jsonrpc/7) [jsonrpc.JsonRpcServer] RPC call Volume.setDescription failed (error 855) in 0.10 seconds (__init__:573) 2018-06-13 12:15:38,953+0200 INFO (jsonrpc/5) [api.host] START getAllVmStats() from=::ffff:<IP>,54666 (api:46) 2018-06-13 12:15:38,956+0200 INFO (jsonrpc/5) [api.host] FINISH getAllVmStats return={'status': {'message': 'Done', 'code': 0}, 'statsList': (suppressed)} from=::ffff:<IP>,54666 (api:52) 2018-06-13 12:15:38,957+0200 INFO (jsonrpc/5) [jsonrpc.JsonRpcServer] RPC call Host.getAllVmStats succeeded in 0.01 seconds (__init__:573) 2018-06-13 12:15:39,406+0200 INFO (jsonrpc/4) [vdsm.api] START getSpmStatus(spUUID=u'3edb5295-3797-4cd0-9b43-f46ec1ee7b14', options=None) from=::ffff:<IP>,54666, task_id=eabfe183-dfb0-4982-b7ea-beacca74aeef (api:46) 2018-06-13 12:15:39,410+0200 INFO (jsonrpc/4) [vdsm.api] FINISH getSpmStatus return={'spm_st': {'spmId': 2, 'spmStatus': 'SPM', 'spmLver': 20L}} from=::ffff:<IP>,54666, task_id=eabfe183-dfb0-4982-b7ea-beacca74aeef (api:52) 2018-06-13 12:15:39,410+0200 INFO (jsonrpc/4) [jsonrpc.JsonRpcServer] RPC call StoragePool.getSpmStatus succeeded in 0.01 seconds (__init__:573) 2018-06-13 12:15:39,416+0200 INFO (jsonrpc/1) [vdsm.api] START getStoragePoolInfo(spUUID=u'3edb5295-3797-4cd0-9b43-f46ec1ee7b14', options=None) from=::ffff:<IP>,54686, task_id=b2003a6f-dd74-47ab-b4f0-95ffb54dc51d (api:46) 2018-06-13 12:15:39,420+0200 INFO (jsonrpc/1) [vdsm.api] FINISH getStoragePoolInfo return={'info': {'name': 'No Description', 'isoprefix': '', 'pool_status': 'connected', 'lver': 20L, 'domains': u'373efd46-8aea-4d0e-96cc-1da0debf72d0: Active,9ed4b0d2-c555-4b27-8f88-75c47a99ad98:Attached,efd78d36-c395-4e9a-a46e-6059fa53756d:Active,3675435e-851e-4236-81da-fce1cc027238:Active', 'master_uuid': 'efd78d36-c395-4e9a-a46e-6059fa53756d', 'version': '4', 'spm_id': 2, 'type': 'FCP', 'master_ver': 12}, 'dominfo': {u'373efd46-8aea-4d0e-96cc-1da0debf72d0': {'status': u'Active', 'diskfree': '8722541707264', 'isoprefix': '', 'alerts': [], 'disktotal': '8795690369024', 'version': 4}, u'9ed4b0d2-c555-4b27-8f88-75c 47a99ad98': {'status': u'Attached', 'isoprefix': '', 'alerts': []}, u'efd78d36-c395-4e9a-a46e-6059fa53756d': {'status': u'Active', 'diskfree': '8718783610880', 'isoprefix': '', 'alerts': [], 'disktotal': '8795690369024', 'version': 4}, u'3675435e-851e-4236-81da-fce1cc027238': {'status': u'Active', 'diskfree': '8713280684032', 'isoprefix': '', 'alerts': [], 'disktotal': '8795690369024', 'version': 4}}} from=::ffff:<IP>,54686, task_id=b2003a6f-dd74-47ab-b4f0-95 ffb54dc51d (api:52) 2018-06-13 12:15:39,421+0200 INFO (jsonrpc/1) [jsonrpc.JsonRpcServer] RPC call StoragePool.getInfo succeeded in 0.01 seconds (__init__:573) All the best, Oliver

4 7

Unable to backend oVirt with Cinder
by Logan Kuhn 21 Jun '18

21 Jun '18

------=_Part_51316288_608143832.1472587678781 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit I've got Cinder configured and pointed at Ceph for it's back end storage. I can run ceph commands on the cinder machine and cinder is configured for noauth and I've also tried it with Keystone for auth. I can run various cinder commands and it'll return as expected. When I configure it in oVirt it'll add the external provider fine, but when I go to create a disk it doesn't populate the volume type field, it's just empty. The corresponding command for cinder: cinder type-list and cinder type-show <name> returns fine and it is public. Ovirt and Cinder are on the same host so it isn't a firewall issue. Cinder config: [DEFAULT] rpc_backend = rabbit #auth_strategy = keystone auth_strategy = noauth enabled_backends = ceph #glance_api_servers = http://10.128.7.252:9292 #glance_api_version = 2 #[keystone_authtoken] #auth_uri = http://10.128.7.252:5000/v3 #auth_url = http://10.128.7.252:35357/v3 #auth_type = password #memcached_servers = localhost:11211 #project_domain_name = default #user_domain_name = default #project_name = services #username = user #password = pass [ceph] volume_driver = cinder.volume.drivers.rbd.RBDDriver volume_backend_name = ceph rbd_pool = ovirt-images rbd_user = cinder rbd_secret_uuid = <secret> rbd_ceph_conf = /etc/ceph/ceph.conf rbd_flatten_volume_from_snapshot = true rbd_max_clone_depth = 5 rbd_store_chunk_size = 4 rados_connect_timeout = -1 #glance_api_version = 2 [database] connection = postgresql://user:pass@10.128.2.33/cinder [oslo_concurrency] lock_path = /var/lib/cinder/tmp [oslo_messaging_rabbit] rabbit_host = localhost rabbit_port = 5672 rabbit_userid = user rabbit_password = pass Regards, Logan ------=_Part_51316288_608143832.1472587678781 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: Arial; font-size: 12pt; color: #0000= 00"><div>I've got Cinder configured and pointed at Ceph for it's back end s= torage.  I can run ceph commands on the cinder machine and cinder is c= onfigured for noauth and I've also tried it with Keystone for auth.  I= can run various cinder commands and it'll return as expected. </= div><div><br data-mce-bogus=3D"1"></div><div>When I configure it in oVirt i= t'll add the external provider fine, but when I go to create a disk it does= n't populate the volume type field, it's just empty.  The correspondin= g command for cinder: cinder type-list and cinder type-show <name> re= turns fine and it is public. </div><div><br data-mce-bogus=3D"1"></div= ><div>Ovirt and Cinder are on the same host so it isn't a firewall issue.</= div><div><br data-mce-bogus=3D"1"></div><div>Cinder config:</div><div>[DEFA= ULT]<br>rpc_backend =3D rabbit<br>#auth_strategy =3D keystone<br>auth_strat= egy =3D noauth<br>enabled_backends =3D ceph<br>#glance_api_servers =3D http= ://10.128.7.252:9292<br>#glance_api_version =3D 2<br><br>#[keystone_authtok= en]<br>#auth_uri =3D http://10.128.7.252:5000/v3<br>#auth_url =3D http://10= .128.7.252:35357/v3<br>#auth_type =3D password<br>#memcached_servers =3D lo= calhost:11211<br>#project_domain_name =3D default<br>#user_domain_name =3D = default<br>#project_name =3D services<br>#username =3D user<br>#passwo= rd =3D pass<br><br>[ceph]<br>volume_driver =3D cinder.volume.drivers.rbd.RB= DDriver<br>volume_backend_name =3D ceph<br>rbd_pool =3D ovirt-images<br>rbd= _user =3D cinder<br>rbd_secret_uuid =3D <secret><br>rbd_ceph_con= f =3D /etc/ceph/ceph.conf<br>rbd_flatten_volume_from_snapshot =3D true<br>r= bd_max_clone_depth =3D 5<br>rbd_store_chunk_size =3D 4<br>rados_connect_tim= eout =3D -1<br>#glance_api_version =3D 2<br><br>[database]<br>connection = =3D postgresql://user:pass@10.128.2.33/cinder<br><br>[oslo_concurrency]<br>= lock_path =3D /var/lib/cinder/tmp<br><br>[oslo_messaging_rabbit]<br>rabbit_= host =3D localhost<br>rabbit_port =3D 5672<br>rabbit_userid =3D <span = style=3D"color: #000000; font-family: Arial; font-size: 16px; font-style: n= ormal; font-variant-ligatures: normal; font-variant-caps: normal; font-weig= ht: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-a= lign: start; text-indent: 0px; text-transform: none; white-space: normal; w= idows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; display: inlin= e !important; float: none; background-color: #ffffff;" data-mce-style=3D"co= lor: #000000; font-family: Arial; font-size: 16px; font-style: normal; font= -variant-ligatures: normal; font-variant-caps: normal; font-weight: normal;= letter-spacing: normal; line-height: normal; orphans: 2; text-align: start= ; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; w= ord-spacing: 0px; -webkit-text-stroke-width: 0px; display: inline !importan= t; float: none; background-color: #ffffff;">user</span><br>rabbit_password = =3D <span style=3D"color: #000000; font-family: Arial; font-size: 16px= ; font-style: normal; font-variant-ligatures: normal; font-variant-caps: no= rmal; font-weight: normal; letter-spacing: normal; line-height: normal; orp= hans: 2; text-align: start; text-indent: 0px; text-transform: none; white-s= pace: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px;= display: inline !important; float: none; background-color: #ffffff;" data-= mce-style=3D"color: #000000; font-family: Arial; font-size: 16px; font-styl= e: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-= weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; te= xt-align: start; text-indent: 0px; text-transform: none; white-space: norma= l; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; display: i= nline !important; float: none; background-color: #ffffff;">pass</span></div= ><div><br></div><div data-marker=3D"__SIG_PRE__">Regards,<br>Logan</div></d= iv></body></html> ------=_Part_51316288_608143832.1472587678781--

4 4

Creating snapshot of a subset of disks
by Gianluca Cecchi 21 Jun '18

21 Jun '18

Hello, I'm trying to see how to create a snapshot of a VM, but only of a subset of its disks (actually it will be only the bootable one) Taking the examples at https://github.com/oVirt/ovirt-engine-sdk/tree/master/sdk/examples I can accomodate something like this # Get the reference to the service that manages the virtual machines: vms_service = system_service.vms_service() # Find the virtual machine and put into data_vm vm = vms_service.list( search='name=%s' % MY_VM_NAME, all_content=True, )[0] logging.info( 'Found virtual machine \'%s\', the id is \'%s\'.', vm.name, vm.id, ) # Find the services that manage the data_vm virtual machine: vm_service = vms_service.vm_service(vm.id) # Send the request to create the snapshot. Note that this will return # before the snapshot is completely created, so we will later need to # wait till the snapshot is completely created. snaps_service = vm_service.snapshots_service() snap = snaps_service.add( snapshot=types.Snapshot( description=snap_description, persist_memorystate=False, ), ) This makes a snapshot of all the dsks of the vm. I can previously filter in my case the bootable disk with something like this: # Locate the service that manages the disk attachments of the virtual # machine: disk_attachments_service = vm_service.disk_attachments_service() # Retrieve the list of disks attachments, and print the disk details. disk_attachments = disk_attachments_service.list() for disk_attachment in disk_attachments: disk = connection.follow_link(disk_attachment.disk) print("name: %s" % disk.name) print("id: %s" % disk.id) print("status: %s" % disk.status) print("bootable: %s" % disk_attachment.bootable) print("provisioned_size: %s" % disk.provisioned_size) So in case of an example VM with two disks I get this print out name: padnpro_bootdisk id: c122978a-70d7-48aa-97c5-2f17d4603b1e status: ok bootable: True provisioned_size: 59055800320 name: padnpro_imp_Disk1 id: 5454b137-fb2c-46a7-b345-e6d115802582 status: ok bootable: False provisioned_size: 10737418240 But I haven't found then the syntax to use to specify a disk list in the block where I create the sapshot of the VM snap = snaps_service.add( snapshot=types.Snapshot( description=snap_description, persist_memorystate=False, disxk x x x ? ? ? ), ) Any help in this direction? Tahnsk, Gianluca

2 4

oVirt 4.2 and I/O threads configuration
by Gianluca Cecchi 21 Jun '18

21 Jun '18

Hello, in oVirt 4.1 I could enable I/O threads for a VM and then there was a field where I could define how many I/O threads (aka virtual scsi controllers from vm point of view). In 4.2 now I see only the option to enable them but not to specify the number. Next to the setting there is a symbol and a mouseover says "the field is not attached to any instance type" See this screenshot for the Edit VM -> Resource Allocation content: https://drive.google.com/file/d/1JzCiUBnWxS9fiY64_p5TJMY0uO5ZZUID/view?usp=… Any hints for setting the number? Thanks in advance, Gianluca

2 4

Re: [spice-list] Fwd: Fwd: VM hanging at boot - [drm] Initialized qxl
by Christophe Fergeau 20 Jun '18

20 Jun '18

On Wed, Jun 20, 2018 at 12:38:00PM +0300, Yaniv Kaul wrote: > On Wed, Jun 20, 2018 at 12:26 PM, Christophe Fergeau <cfergeau(a)redhat.com> > wrote: > > > > ---------- Forwarded message ---------- > > > > From: Leo David <leoalex(a)gmail.com> > > > > Date: Wed, Jun 13, 2018 at 8:24 PM > > > > Subject: VM hanging at boot - [drm] Initialized qxl > > > > To: users(a)ovirt.org > > > > > > > > > > > > Hello everyone, > > > > I have some Centos7 vms created from template ( CentOS 7 Generic Cloud > > > > Image v1802 for x86_64 ) > > > > I have alocated planty of resources to them, but they all have this > > issue > > > > when starting, they hang with the following message in console about > > 5-7 > > > > minutes. > > > > > > > > [drm] Initialized qxl 0.1.0 20120117 for 0000:00:02:0 on mirror 0 > > > > > > > > After a while, vm eventually boots up... > > > > Running self-hosted ovirt-node 4.2 > > > > Does anyone know what could be the issue for this behavior ? > > > > Thank you ! > > > > There were recently some hangs at startup due to a kernel bug in the qxl > > driver related to atomic modesetting, no idea if centos could be > > impacted by this or not. Does the issue go away when using another > > graphics device than QXL? > > > > Can you please respond on the oVirt users mailing list? I added it to cc: Christophe

2 1

upgrade 4.1 to 4.2
by Staniforth, Paul 20 Jun '18

20 Jun '18

Hello, I am trying to test the upgrade of our system from oVirt 4.1 to oVirt 4.2. I'm trying to restore a backup onto a test system but cannot install version 4.1 as the repos are not available. yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm yum install ovirt-engine gives http://mirror.centos.org/centos/7/storage/x86_64/gluster-3.8/repodata/repom…: [Errno 14] HTTP Error 404 - Not Found and yum --disablerepo=ovirt-4.1-centos-gluster38 install ovirt-engine gives http://mirror.centos.org/centos/7/virt/x86_64/ovirt-4.1/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found are there any alternate repos to try? Thanks, Paul S. To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html

3 5

[ANN] oVirt 4.2.4 Fifth Release Candidate is now available
by Lev Veyde 20 Jun '18

20 Jun '18

The oVirt Project is pleased to announce the availability of the oVirt 4.2.4 Fifth Release Candidate, as of June 20th, 2018. This update is a release candidate of the fourth in a series of stabilization updates to the 4.2 series. This is pre-release software. This pre-release should not to be used in production. This release is available now for: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node is available [2] Additional Resources: * Read more about the oVirt 4.2.4 release highlights: http://www.ovirt.org/release/4.2.4/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.4/ [2] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/ -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

ovirt upgrade 4.1 -> 4.2: host bricks down
by Alex K 20 Jun '18

20 Jun '18

Hi all, I have a ovirt 2 node cluster for testing with self hosted engine on top gluster. The cluster was running on 4.1. After the upgrade to 4.2, which generally went smoothly, I am seeing that the bricks of one of the hosts (v1) are detected as down, while the gluster is ok when checked with command lines and all volumes mounted. Below is the error that the engine logs: 2018-06-17 00:21:26,309+03 ERROR [org.ovirt.engine.core.bll.gluster.GlusterSyncJob] (DefaultQuartzScheduler2) [98d7e79] Error while refreshing brick statuses for volume 'vms' of cluster 'test': null 2018-06-17 00:21:26,318+03 ERROR [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand] (DefaultQuartzScheduler2) [98d7e79] Command 'GetGlusterLocalLogicalVolumeListVDSCommand(HostName = v0.test-group.com, VdsIdVDSCommandParametersBase:{hostId='d5a96118-ca49-411f-86cb-280c7f9c421f'})' execution failed: null 2018-06-17 00:21:26,323+03 ERROR [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand] (DefaultQuartzScheduler2) [98d7e79] Command 'GetGlusterLocalLogicalVolumeListVDSCommand(HostName = v1.test-group.com, VdsIdVDSCommandParametersBase:{hostId='12dfea4a-8142-484e-b912-0cbd5f281aba'})' execution failed: null 2018-06-17 00:21:27,015+03 INFO [org.ovirt.engine.core.bll.lock.InMemoryLockManager] (DefaultQuartzScheduler9) [426e7c3d] Failed to acquire lock and wait lock 'EngineLock:{exclusiveLocks='[00000002-0002-0002-0002-00000000017a=GLUSTER]', sharedLocks=''}' 2018-06-17 00:21:27,926+03 ERROR [org.ovirt.engine.core.bll.gluster.GlusterSyncJob] (DefaultQuartzScheduler2) [98d7e79] Error while refreshing brick statuses for volume 'engine' of cluster 'test': null Apart from this everything else is operating normally and VMs are running on both hosts. Any idea to isolate this issue? Thanx, Alex

7 9

cloud-init reverting static network settings to DHCP on shutdown and restart
by geoff.carr＠beazley.com 20 Jun '18

20 Jun '18

Setting static network settings in the "Initial Run" section works fine when deploying a VM from template. When using "Run" to start the VM, customization works as expected. On a reboot the network settings are maintained however if the VM is shutdown and restarted the settings are reverted to DHCP. When editing the VM the cloud-init settings are still set and a visible in the "Initial Run" section. cloud-init (0.7.9-24.el7.centos) - Previously 0.7.9-20.el7.centos but upgraded to see if it would fix the issue. oVirt engine (4.2.4.1-1.el7) Guest OS (CentOS Linux release 7.4.1708) There is another thread that reports exactly the same issue and behavior here: - https://lists.ovirt.org/pipermail/users/2018-March/087860.html Grateful for any thoughts or assistance. Regards Geoff

4 4

Hardering oVirt Engine
by Punaatua PK 19 Jun '18

19 Jun '18

Hello, we are subject to PCI-DSS. I have some questions. We currently have setup oVirt in our environnement. We created 2 Datacenter. - one with a cluster with hosted engine on gluster (Hyperconverged env) which represents the "LAN" part - one with a cluster with gluster storage wich is the DMZ In PCI-DSS we have to secure communication (use HTTPs as much as possible). I did saw that ovirt-ha-agent (on hosted-engine capable host) check the status of the engine by sending GET request on the hosted-engine on port 80 (the same check that hosted-engine --vm-status did in fact). Since ovirt 4.2.2, with the introduction of gluster eventing, a new flow (HTTP post resquest) is needed from gluster nodes to the engine. (In my case, it's a flow from the DMZ to the LAN part in HTTP (non secure) Here is my question. Is it possible to "hardering" this part of the engine ? Another question out of PCI scope. Events like warning and error in the dashboard are clean each days. I tried to find which process did that (look into /etc/cron.daily, root crontab, etc) on the engine without succes. Is there any maintenance task that is run periodicaly ? Could we have the list of all the engine's task ? (regulary check the status of host, vm, storage) also the frequency ? I would appreciate the help. (Great great product ovirt !) Thank you for your jobs ! We did manage KVM hypervisor as standalone machine without all the power that libvirt provides. No need to spend lot of money into licencing product (VSphere and co)

2 3

Re: Ovirt + Gluster : How do I gain access to the file systems of the VMs
by Hanson Turner 19 Jun '18

19 Jun '18

Hi Guys, I've an answer... Here's how I did it... First, I needed kpartx ... so #apt-get install kpartx Then setup a loopback device for the raw hdd image #losetup /dev/loop4 [IMAGE FILE] #kpartx -a /dev/loop4 This allowed me to mount the various partitions included in the VM. There you can modify the configs, make backups etc. Thanks, Hanson On 06/19/2018 09:31 AM, Hanson Turner wrote: > > Hi Sahina, > > Thanks for your reply, I can copy the files off without issue. Using > either a remote mount gluster, or just use the node and scp the files > to where I want them. > > I was asking how to/do I mount the VM's disk in a way to be able to > pull/modify files that are on the HDD of the VM. > > Thanks, > > Hason > > > On 06/19/2018 05:02 AM, Sahina Bose wrote: >> >> >> On Mon, Jun 18, 2018 at 5:12 PM, Hanson Turner >> <hanson(a)andrewswireless.net <mailto:hanson@andrewswireless.net>> wrote: >> >> Hi Guys, >> >> My engine has corrupted, and while waiting for help, I'd like to >> see if I can pull some data off the VM's to re purpose back onto >> dedicated hardware. >> >> Our setup is/was a gluster based storage system for VM's. The >> gluster data storage I'm assuming is okay, I think the hosted >> engine is hosed, and needs restored, but that's another thread. >> >> I can copy the raw disk file off of the gluster data domain. >> What's the best way to mount it short of importing it into >> another gluster domain? >> >> With vmware, we can grab the disk file and move it from server to >> server without issue. You can mount and explore contents with >> workstation. >> >> >> If you want to copy the image file. you can mount the gluster volume >> and copy it. >> using mount -t glusterfs <gluster-server>:/<volumename> <path-to-mount> >> >> >> What do we have available to us for ovirt? >> >> Thanks, >> >> _______________________________________________ >> Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org> >> To unsubscribe send an email to users-leave(a)ovirt.org >> <mailto:users-leave@ovirt.org> >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> <https://www.ovirt.org/site/privacy-policy/> >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> <https://www.ovirt.org/community/about/community-guidelines/> >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/2AF5K2JERYH63… >> <https://lists.ovirt.org/archives/list/users@ovirt.org/message/2AF5K2JERYH63…> >> >> >

2 1

General failure
by nicolas＠devels.es 19 Jun '18

19 Jun '18

Hi, We're running oVirt 4.1.9 (we cannot upgrade at this time) and we're having a major problem in our infrastructure. On friday, a snapshots were automatically created on more than 200 VMs and as this was just a test task, all of them were deleted at the same time, which seems to have corrupted several VMs. When trying to delete a snapshot on some of the VMs, a "General error" is thrown with a NullPointerException in the engine log (attached). But the worst part is that when some of these machines is powered off and then powered on, the VMs are corrupt... VM myvm is down with error. Exit message: Bad volume specification {u'index': 0, u'domainID': u'110ea376-d789-40a1-b9f6-6b40c31afe01', 'reqsize': '0', u'format': u'cow', u'bootOrder': u'1', u'address': {u'function': u'0x0', u'bus': u'0x00', u'domain': u'0x0000', u'type': u'pci', u'slot': u'0x06'}, u'volumeID': u'1fd0f9aa-6505-45d2-a17e-859bd5dd4290', 'apparentsize': '23622320128', u'imageID': u'65519220-68e1-462a-99b3-f0763c78eae2', u'discard': False, u'specParams': {}, u'readonly': u'false', u'iface': u'virtio', u'optional': u'false', u'deviceId': u'65519220-68e1-462a-99b3-f0763c78eae2', 'truesize': '23622320128', u'poolID': u'75bf8f48-970f-42bc-8596-f8ab6efb2b63', u'device': u'disk', u'shared': u'false', u'propagateErrors': u'off', u'type': u'disk'}. We're really frustrated by now and don't know how to procceed... We have a DB backup (with engine-backup) from thursday which would have a "sane" DB definition without all the snapshots, as they were all created on friday. Would it be safe to restore this backup? Any help is really appreciated... Thanks.

4 15

Unable to start Ovirt engine
by Deekshith 19 Jun '18

19 Jun '18

Hi Team Please anyone help me to solve this issue.

3 4

glusterfs-fuse consuming large amounts of ram
by Edward Clay 19 Jun '18

19 Jun '18

It looks like we are experiencing a bug in the version of glusterfs included with ovirt 4.2.3. It looks like glusterfs 3.12.x has an issue where it consumes large amounts of ram which has caused our HV report storage errors and pause VMs. https://bugzilla.redhat.com/show_bug.cgi?id=1496379 Is there a safe way to get glusterfs-fuse v3.13.x installed with ovirt 4.2.3 or do we have to live with this issue until future updates to ovirt/glusterfs are released? $ ssh hv1.domain.com "sudo grep glusterfs /var/log/messages-* | grep -i kill " /var/log/messages-20180610:Jun 6 13:49:54 hv1 kernel: Out of memory: Kill process 15353 (glusterfs) score 630 or sacrifice child /var/log/messages-20180610:Jun 6 13:49:54 hv1 kernel: Killed process 15353 (glusterfs) total-vm:33800604kB, anon-rss:31896632kB, file-rss:840kB, shmem-rss:0kB /var/log/messages-20180617:Jun 17 00:24:16 hv1 kernel: Out of memory: Kill process 4072 (glusterfs) score 678 or sacrifice child /var/log/messages-20180617:Jun 17 00:24:16 hv1 kernel: Killed process 4072 (glusterfs) total-vm:36159900kB, anon-rss:34338508kB, file-rss:888kB, shmem-rss:0kB We see this same issue occur on all hv in our cluster. Edward Clay Systems Administrator The Hut Group<http://www.thehutgroup.com/> Tel: Email: edward.clay(a)uk2group.com<mailto:edward.clay@uk2group.com> For the purposes of this email, the "company" means The Hut Group Limited, a company registered in England and Wales (company number 6539496) whose registered office is at Fifth Floor, Voyager House, Chicago Avenue, Manchester Airport, M90 3DQ and/or any of its respective subsidiaries. Confidentiality Notice This e-mail is confidential and intended for the use of the named recipient only. If you are not the intended recipient please notify us by telephone immediately on +44(0)1606 811888 or return it to us by e-mail. Please then delete it from your system and note that any use, dissemination, forwarding, printing or copying is strictly prohibited. Any views or opinions are solely those of the author and do not necessarily represent those of the company. Encryptions and Viruses Please note that this e-mail and any attachments have not been encrypted. They may therefore be liable to be compromised. Please also note that it is your responsibility to scan this e-mail and any attachments for viruses. We do not, to the extent permitted by law, accept any liability (whether in contract, negligence or otherwise) for any virus infection and/or external compromise of security and/or confidentiality in relation to transmissions sent by e-mail. Monitoring Activity and use of the company's systems is monitored to secure its effective use and operation and for other lawful business purposes. Communications using these systems will also be monitored and may be recorded to secure effective use and operation and for other lawful business purposes. hgvyjuv

3 2

Slow on deleting file in VM with gluster as storage
by nha.pham 19 Jun '18

19 Jun '18

Hi all, I had an issue with delete file in VM. I used Ovirt with Gluster as Storage. I create new VM is fast, install everything is fast, also create and copy file. But when I delete large number of file in VM, it really slow. OS in VM is windows server 2012 r2. Ovirt 4.2.3 Gluster 3.12.9 Could you please help me on this case. Thanks.

2 1

Ovirt + Gluster : How do I gain access to the file systems of the VMs
by Hanson Turner 19 Jun '18

19 Jun '18

Hi Guys, My engine has corrupted, and while waiting for help, I'd like to see if I can pull some data off the VM's to re purpose back onto dedicated hardware. Our setup is/was a gluster based storage system for VM's. The gluster data storage I'm assuming is okay, I think the hosted engine is hosed, and needs restored, but that's another thread. I can copy the raw disk file off of the gluster data domain. What's the best way to mount it short of importing it into another gluster domain? With vmware, we can grab the disk file and move it from server to server without issue. You can mount and explore contents with workstation. What do we have available to us for ovirt? Thanks,

2 1

glusterfs backup-volfile-servers lost
by g.vasilopoulos＠uoc.gr 19 Jun '18

19 Jun '18

I have a 4 node setup (centos 7) with hosted engine on glusterfs (replica 3 arbiter1). Gluster fs is like this ohost01 104G brick (real data) ohost02 104g brick (real data) ohost04 104g brick (arbiter) ohost05 104g partition used as nfs-storage. hosted engine is on gluster. I also have an fc domain of 3,6 TB mount of gluster is like this storage=172.16.224.10:/engine mnt_options=backup-volfile-servers=172.16.224.11:172.16.224.13 172.16.224.10 is ohost01 storage network 172.16.224.12 is ohost02 storage network 172.16.224.13 is ohost04 storage network Today I upgraded all nodes. I did it like this: hosted-engine was running on ohost05 at the time Put ohost04 (arbiter) on maintenance and did upgrade (ok) Same with ohost02 Ohost01 was spm so I did ohost05 spm then put ohost01 on maintenance and then upgraded it. I notticed that engine VM paused during the process (which usualy does not happen) as I have backup-volfile-servers mount option. But today I notticed that this option is ignored. On the hosts I also noted that mount is like this 172.16.224.10:/engine on /rhev/data-center/mnt/glusterSD/172.16.224.10:_engine type fuse.glusterfs (rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) so reduduncy is gone from gluster and I cannot figure out why. If I restart ohost01 (after maintenance) hosted engine get paused until ohost01 comes back up. How can I solve this issue

2 6

Lost host after upgrade/reboot
by Nicolas Ecarnot 19 Jun '18

19 Jun '18

Hello, TL;DR : engine stops talking with rebooted host. [oVirt 4.2.3.5-1.el7.centos] - From the web gui, upgrading a host, allowing the reboot checkbox checked - upgrade is OK (/var/log/yum.log is showing successful updates + the Ansible host deploy log is also OK) - reboot is OK (clean, SSH OK...) - the host eventually appears as "Install failed" - the engine.log is telling : > 2018-06-19 10:02:24,896+02 ERROR > [org.ovirt.engine.core.bll.SshHostRebootCommand] > (EE-ManagedThreadFactory-commandCoordinator-Thread-7) [6e32b3ac] SSH > reboot command failed on host 'serv-hv-prds06': SSH session timeout > host 'root@ serv-hv-prds06' Stdout: Stderr: 2018-06-19 > 10:02:25,028+02 ERROR > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (EE-ManagedThreadFactory-commandCoordinator-Thread-7) [6e32b3ac] > EVENT_ID: SYSTEM_FAILED_SSH_HOST_RESTART(198), A restart usin g SSH > initiated by the engine to Host serv-hv-prds06 has failed. 2018-06-19 > 10:02:25,185+02 INFO > [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] > (EE-ManagedThreadFactory-commandCoordinator-Thread-7) [6e32b3ac] > START, SetVdsStatusVDSCommand(HostName = serv-hv-prds06, > SetVdsStatusVDSCom > mandParameters:{hostId='9c1566a4-8432-4de6-b30d-fd3b8e5fafca', > status='InstallFailed', nonOperationalReason='NONE', > stopSpmFailureLogged='false', maintenanceReason='null'}), log id: > 833f9bd 2018-06-19 10:02:25,191+02 INFO > [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] > (EE-ManagedThreadFactory-commandCoordinator-Thread-7) [6e32b3ac] > FINISH, SetVdsStatusVDSCommand, log id: 833f9bd 2018-06-19 > 10:02:25,191+02 ERROR > [org.ovirt.engine.core.bll.hostdeploy.UpgradeHostInternalCommand] > (EE-ManagedThreadFactory-commandCoordinator-Thread-7) [6e32b3ac] > Engine failed to restart via ssh host 'serv-hv-prds06' ('9c1566a4- > 8432-4de6-b30d-fd3b8e5fafca') after upgrade 2018-06-19 > 10:02:25,256+02 ERROR > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (EE-ManagedThreadFactory-commandCoordinator-Thread-7) > [8b7c6e7d-1a22-407c-818b-849e67b94051] EVENT_ID: > HOST_UPGRADE_FAILED(841 ), Failed to upgrade Host serv-hv-prds06 > (User: necarnot@sdis.isere.fr@SDIS38-authz). 2018-06-19 > 10:02:30,755+02 ERROR > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (EE-ManagedThreadFactory-engineScheduled-Thread-69) > [8b7c6e7d-1a22-407c-818b-849e67b94051] EVENT_ID: > HOST_UPGRADE_FAILED(841), Failed to upgrade Host serv-hv-prds06 > (User: necarnot@sdis.isere.fr@SDIS38-authz). - Manually activating the host puts it back on track without issue The usual SSH communications between the engine and the host are usually very sound (VM migrations, maintenance...). On this oVirt DC, I reproduced this issue twice on 2 different hosts. In this engine log above, you see that I'm using my account to manage this engine, as I 'm doing for years with no issue. I'll try the exact same path with admin@internal to see what could change, but I don't see the link. What other logs could I give you to debug this? Regards, -- Nicolas ECARNOT

1 1

oVirt Node 4.1 at www.ovirt.org/node/ is 404
by clam2718＠gmail.com 19 Jun '18

19 Jun '18

I am trying to download Node 4.1 from https://www.ovirt.org/node but am receiving a 404 error. Is there an alternative link to try for the latest stable release? Thanks, Charles

3 2

RHEL 7.5 as an oVirt host - missing packages
by jasonmicron＠gmail.com 19 Jun '18

19 Jun '18

Hello everyone, I believe there is a potential issue with the RHEL 7 yum repos and at least one missing RPM to convert a pre-existing RHEL 7.5 system into an oVirt host node. I have the following YUM repos enabled in my RHEL 7 system, according to the documentation: rhel-7-server-rpms rhel-7-server-optional-rpms rhel-7-server-extras-rpms I installed the oVirt 4.2 RPM: ovirt-release42-4.2.3.1-1.el7.noarch I then go to the engine GUI to add the new host, and during the installation process I am informed that there is a YUM transaction error with the following package being unavailable: python-qpid-proton (as a dependency install for the python-gofer-proton package) I dug around Red Hat's YUM repos and discovered that this package only exists in the rhel-7-server-satellite-tools-6.{1..3}-rpms YUM repos from the official Red Hat site. I tried enabling this repo (specifically the rhel-7-server-satellite-tools-6.3-rpms repo) to see which version of the package would be installed, and it appears to be a custom spin for Satellite in the release version: ============================================================================================================= Package Arch Version Repository Size ============================================================================================================= Installing: python-gofer-proton noarch 2.7.7-3.el7sat lab1-rhel-7-server-satellite-tools-6.3-rpms 54 k Installing for dependencies: python-gofer noarch 2.7.7-3.el7sat lab1-rhel-7-server-satellite-tools-6.3-rpms 132 k python-qpid-proton x86_64 0.16.0-7.el7 lab1-rhel-7-server-satellite-tools-6.3-rpms 216 k qpid-proton-c x86_64 0.16.0-7.el7 lab1-rhel-7-server-satellite-tools-6.3-rpms 131 k Transaction Summary ============================================================================================================== Install 1 Package (+3 Dependent packages) Since I shouldn't even require this repo according to the official oVirt install documentation for hosts, and the fact that these packages appear to be custom spins (el7sat) versions, I was curious if this is OK to use for oVirt or if I have encountered a dependency bug with RHEL 7.5 and oVirt 4.2? Any advice would be welcomed.

2 2

Gluster Deployment: Repositories, Packages
by femi adegoke 19 Jun '18

19 Jun '18

In Step 2 of the HE deployment what should be filled in here? Repositories: ?? Packages: ??

4 5

oVirt 4.2 vm-portal console
by Staniforth, Paul 19 Jun '18

19 Jun '18

Hello, I have installed a test system for oVirt 4.2 and it seems that in the vm portal I can't change the console to vnc or spice+vnc. It seems that this is only available in the admin portal. Am I missing something? Thanks, Paul S. To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html

2 1

Ovirt Node NG (4.2.3.1-0.20180530) Boot fail ISCSI using ibft after installation
by Ralf Schenk 18 Jun '18

18 Jun '18

Hello, I successfully installed Ovirt Node NG from ISO to an ISCSI target attached via first network interface by using following extensions to the grub cmdline: "rd.iscsi.ibft=1 ip=ibft ip=eno2:dhcp" I want to use the server as diskless ovirt-node-ng Server. After successful install the system reboots and starts up but it fails later in dracut even having detected correctly the disk and all the LV's. I think "iscsistart" is run multiple times even after already being logged in to the ISCSI-Target and that fails finally like that: *[ 147.644872] localhost dracut-initqueue[1075]: iscsistart: initiator reported error (15 - session exists)* [ 147.645588] localhost dracut-initqueue[1075]: iscsistart: Logging into iqn.2018-01.de.databay.office:storage01.epycdphv02-disk1 172.16.1.3:3260,1 [ 147.651027] localhost dracut-initqueue[1075]: Warning: 'iscsistart -b ' failed with return code 0 [ 147.807510] localhost systemd[1]: Starting Login iSCSI Target... [ 147.809293] localhost iscsistart[6716]: iscsistart: TargetName not set. Exiting iscsistart [ 147.813625] localhost systemd[1]: iscsistart_iscsi.service: main process exited, code=exited, status=7/NOTRUNNING [ 147.824897] localhost systemd[1]: Failed to start Login iSCSI Target. [ 147.825050] localhost systemd[1]: Unit iscsistart_iscsi.service entered failed state. [ 147.825185] localhost systemd[1]: iscsistart_iscsi.service failed. -- Mit freundlichen Grüßen Ralf Schenk

2 1

HostedEngine and affinity groups
by tehnic＠take3.ro 18 Jun '18

18 Jun '18

Hi, i operate a 3 node ovirt42 cluster (hyperconverged). Now i would like to isolate the HostedEngine from the other VMs. The reason is to minimize the impact of outage of one of the nodes. When the node with the HE is away there is no impact at all on the running VMs. If one of the other nodes goes down, then i have still a running HE which restarts the missing VMs on remaining nodes fast again. I cannot use hard affinity because in case of failure i need all resources of the 2 remaining modes, so i configured a soft negative affinity group for every VM between this VM and the HE. As a first test i migrated the HE to a node with VMs but even after a while nothing happened. I would have expected that either the HE or the VMs on this node would have been migrated to fullfill the soft negative affinity. Now my questions: Are my thoughts correct? Is there a better solution than making one (soft negative) affinity group for every VM to isolate from HE? Does the affinity group enforcement engine work at all with soft rules? Regards, Robert

2 1

Ovirt 4.2 hosted engine deploy failed
by Lakhwinder Rai 18 Jun '18

18 Jun '18

i have error while installing hosted engine.if anybody have solution for this,please help i stuck here from two days. [ INFO ] TASK [Wait for the host to be up] [ ERROR ] fatal: [localhost]: FAILED! => {"ansible_facts": {"ovirt_hosts": []}, "attempts": 120, "changed": false} [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Remove local vm dir] [ INFO ] changed: [localhost] [ INFO ] TASK [Notify the user about a failure] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} thanks

3 2

VM can't start: Unknown CPU-Model
by Tobias Scheinert 18 Jun '18

18 Jun '18

Hi, we see here a confusing problem. A college reboots/shutdown his VMs for maintenance. After that he starts the VMs (~20), but one of them throws following error: > VM <name> is down with error. Exit message: internal error: Unknown CPU-Model SandyBridge,+spec-ctrl All nodes of the clusters are reporting: > CPU Type: > Intel SandyBridge IBRS Family And the cluster is configured with: > Cluster CPU Type: > Intel SandyBridge IBRS Family My quick fix for the vm was, that I used a specific (not the cluster default) CPU-Model without the spectre/meltdown mitigation: > Guest CPU Type: > SandyBridge I've also tried to select manually "SandyBridge,+spec-ctrl". But when I do this the wizard blocks and surround the field with a red border (see picture in the attachment). Any idea? Greeting Tobias

1 0

ovirt 4.2 and hugepages
by Gianluca Cecchi 18 Jun '18

18 Jun '18

A part from configuring high performance vm, that gives me no high availability. Can I allocate huge pages using vdsm-hook-hugepages-4.19.31-1.el7.centos.noarch it seems that after updating an environment to 4.2 I'm not able to start a VM configured with the custom property I get Th ehost xxxxx did not satisfy internal filter HugePages because there are not enough free huge pages to run the VM But on host I have # cat /proc/meminfo | grep -i huge AnonHugePages: 0 kB HugePages_Total: 60000 HugePages_Free: 60000 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB # and the custom property is configured to allocate 8200 huge pages to the guest The gropu configured in sysctl.d/10-hugepages.conf is vm.hugetlb_shm_group = 36 Do I have to set anything in /etc/securily/limits.d/ for qemu user? Thanks In advance, Gainluca

2 2

Gluster not synicng changes between nodes for engine
by Hanson Turner 18 Jun '18

18 Jun '18

Hi Guys, I've got 60 some odd files for each of the nodes in the cluster, they don't seem to be syncing. Running a volume heal engine full, reports successful. Running volume heal engine info reports the same files, and doesn't seem to be syncing. Running a volume heal engine info split-brain, there's nothing listed in split-brain. Peers show as connected. Gluster volumes are started/up. Hosted-engine --vm-status reports : The hosted engine configuration has not been retrieved from shared storage. Please ensure that ovirt-ha-agent is running and the storage server is reachable. This is leaving the cluster in an engine down with all vm's down state... Thanks,

1 1

Install CiscoISE VM on oVirt
by Anantha Raghava 18 Jun '18

18 Jun '18

Hi, I am not sure whether I should write it here. However the documents referred to specifies that I have change something in BIOS of VM & there is no way to get access to BIOS. Hence I am writing here. I am trying to install Cisco ISE in a VM on oVirt. The installation process halts reporting "Unsupported Hardware Found. The Cisco UDI (Unique Device Identifier) found on this appliance does not match with supported UDI of the product being Installed. Exiting installation" However it works perfectly on VMWare ESXi, VMWare Workstation and VMWare Fusion. In fact I tested this in VMWare Workstation and VMWare Fusion. The same ISO file throws above error. Cisco ISE is based on RHEL 7 and it is hardened. Has any one attempted to install Cisco ISE in oVirt? Any one throw some light? My oVirt Version 4.2.3 and Hosts are on 4.1.9 Thanks & regards, Anantha Raghava

2 2

Moving from thin to preallocated storage domains
by Albl, Oliver 17 Jun '18

17 Jun '18

Hi all, I have to move some FC storage domains from thin to preallocated. I would set the storage domain to maintenance, convert the LUN from thin to preallocated on the array, remove "Discard After Delete" from the advanced settings of the storage domain and active it again. Is there anything else I need to take care of? All the best, Oliver

4 4

Non-responsive vm's due to crashed host and hosted vm liveliness check fails
by clam2718＠gmail.com 15 Jun '18

15 Jun '18

Dear Community: The local drive on a host running ovirt-node-ng-4.1.9 in a three node cluster failed. I have production JIRA and Postres running on it at the time, not in HA, just simple vm's. Storage is via NFS on a Synology NAS. Hosted Engine was on a different host, but JIRA and Postgres vm's showed nonresponsive. I tried different things but then stupidly thought that upgrading my Hosted Engine would reinitialize the vm's that were on the failed host. Update of HE seemed to go well (output below) but now my Hosted Engine, while up, fails the liveliness check and the web management console is unavailable. I cannot console into the HE from the host it is running on. Below are the results of my attempts to console into the Hosted Engine. Please help! I have search forums, lists and Google but have not been able to fix this. My coworkers and manager are anxious. --- When I try "hosted-engine --console" after setting the console password I get The engine VM is running on this host Connected to domain HostedEngine Escape character is ^] _ The prompt is non-responsive except for the escape character key combo. --- "virsh -r list" gives ID 3, Name: HostedEngine, State: running "virsh -r console HostedEngine" gives Connected to domain HostedEngine Escape character is ^] error: operation forbidden: read only access prevents virDomainOpenConsole "virsh -r vncdisplay HostedEngine" gives "0:0" and returns me to prompt --- I am SSHed into the host running my Hosted Engine from a CentOS7 minimal install with packages xorg-x11-server-Xorg, xorg-x11-xauth and xorg-x11-apps installed. The result of "grep -i X11Forwarding /etc/ssh/sshd_config" shows it set to "Yes". I SSH into the host using "ssh -Y root(a)xxx.xxx.xxx.xxx" I am logged into the CentOS7 minimal install as root. I know root is poor practice but was trying to minimize anything that could be causing an issue. --- Below are the results of my attempt to update Hosted Engine (slightly redacted to remove personal info): --== CONFIGURATION PREVIEW ==-- Default SAN wipe after delete : False Firewall manager : firewalld Update Firewall : True Host FQDN : ovengineint.xdomainx.tld Upgrade packages : True Engine database secured connection : False Engine database user name : engine Engine database name : engine Engine database host : localhost Engine database port : 5432 Engine database host name validation : False Engine installation : True PKI organization : xdomainx.tld Set up ovirt-provider-ovn : True Configure WebSocket Proxy : True DWH installation : True DWH database secured connection : False DWH database host : localhost DWH database user name : ovirt_engine_history DWH database name : ovirt_engine_history DWH database port : 5432 DWH database host name validation : False Configure Image I/O Proxy : True Configure VMConsole Proxy : True --== SUMMARY ==-- [ INFO ] Restarting httpd Web access is enabled at: http://ovengineint.xdomainx.tld:80/ovirt-engine https://ovengineint.xdomainx.tld:443/ovirt-engine Internal CA XX:XX:XX:XX... SSH fingerprint: SHA256:xxxxxxxxxx... --== END OF SUMMARY ==-- [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20180502165652-88pkpi.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20180502170149-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ INFO ] Execution of setup completed successfully Again, thank you so very much for any suggestions! I have found many answers on this mailing list archive to be of great insight and help. Respectfully, Charles

3 11

User agent for Ovirt 4.2
by Jim Kusznir 15 Jun '18

15 Jun '18

Hi: I haven't managed to find the new / current repo/source for the ovirt guest agent for the 4.2 upgrade. All my VMs now say that they need the agent. Googles keep referring me to old / broke / non-existent repos. Where do I find the 4.2 agent (or does the 4.2 agent even exist?) Thanks! --Jim

4 5

Error UI in engine
by Spickiy Nikita 15 Jun '18

15 Jun '18

Hi, i use engine 4.2.3.8-1.el7 version. When i try opening setting Storage > Volumes > MyVolume i get error at the top of the screen. In log UI https://paste.fedoraproject.org/paste/---B4tGrLbAVYpl1TvR0sg/raw. How to fix it?

2 1

[ANN] oVirt 4.2.4 Fourth Release Candidate is now available
by Sandro Bonazzola 15 Jun '18

15 Jun '18

The oVirt Project is pleased to announce the availability of the oVirt 4.2.4 Fourth Release Candidate, as of June 14th, 2018. This update is a release candidate of the fourth in a series of stabilization updates to the 4.2 series. This is pre-release software. This pre-release should not to be used in production. This release is available now for: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node is available [2] Additional Resources: * Read more about the oVirt 4.2.4 release highlights: http://www.ovirt.org/release/4.2.4/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.4/ [2] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/ -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0

Re: OVA export/import
by RabidCicada 15 Jun '18

15 Jun '18

Third attempt to send to list also > Yaniv, > Most of this is obe...but I'll answer the questions. It's been resolved > as in my other email to this chain. > > > On Thu, Jun 14, 2018, 4:56 PM Yaniv Kaul <ykaul(a)redhat.com> wrote: > >> >> >> On Wed, Jun 13, 2018, 4:05 PM RabidCicada <rabidcicada(a)gmail.com> wrote: >> >>> All, >>> I recently tried to used the OVA export/import functionality. It >>> seems I misunderstood the intentions. I expected OVA export/import to >>> be reciprocal functionalities. I expected what we export as OVA to be >>> importable as OVA in ovirt. >>> >>> What I have found is the following: >>> >>> * It seems OVA export does export an OVA, though the format is not >>> spec compliant >>> >> >> Which spec? >> > I believe every version of the dmtd ovf specification. > >> >> * We use 'disk/' in the HostResource xml field instead of '/disk/' >>> for example in the ovf. >>> >> >> Who's 'we'? >> > Ovirt software/group. I was including myself in a friendly manner soas to > not sound accusatory. I know it's a group effort :). > > >> * It seems OVA import is intended specifically for VMWare OVA's? >>> >> >> That's a common case, but we can look at other OVAs. The problem is that >> the spec is quite loose. >> Y. >> > > Agreed. I know that's why it's hard to be inter-compatible. >

1 0

OVA export/import
by RabidCicada 14 Jun '18

14 Jun '18

All, I recently tried to used the OVA export/import functionality. It seems I misunderstood the intentions. I expected OVA export/import to be reciprocal functionalities. I expected what we export as OVA to be importable as OVA in ovirt. What I have found is the following: * It seems OVA export does export an OVA, though the format is not spec compliant * We use 'disk/' in the HostResource xml field instead of '/disk/' for example in the ovf. * It seems OVA import is intended specifically for VMWare OVA's? * I thought I read about export domains being deprecated, and incorrectly assumed the recently added OVA export/import was to make things better for one off import/export. Can anyone clarify the following: * Is OVA import really just VMWare OVA's? * Are we really not spec compliant with the OVA/OVF format as my example above shows? OR do I misunderstand something? * After spending my time yesterday, I recall now that the deprecation of export domain is in favor of detaching and re-attaching ANY data domain. * What is the purpose of our OVA export if we ourselves indeed cannot import our own OVA? Or can you tell me how we import our own if I'm wrong. Please feel free to overshare details :), as any context will help prevent more confusion on my part. ~Kyle

3 8

Ovirt-Hosted-Engine-Install-Purge Ansible Script Snippet
by RabidCicada 14 Jun '18

14 Jun '18

All, I put together a full purge ansible script for CentOS. I figured I'd share it here. I ran into many issues with spurious failures of installs when I would try to reinstall ovirt on CentOS after having "removed" it. I was developing an automated install of our own software along with ovirt but along the way I had to reinstall on the same box numerous times. Initially I'd get spurious failures from leftover cruft that would get in the way. I eventually found this:https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-fro… and then crafted my own ansible purge script. It uses ovirts own engine cleanup script first if it exists, then fully cleans every other thing that can affect it. Tested on CentOS, probably will work on other distros without too much trouble. Hopefully someone saves themselves some grief - name: Clean Old Install #This attempts to remove all old cruft from previous install attempts #The reason we include the ovirt packages is so that they can be reinstall #At potentially newer versions along with dependency packages block: - name: Detect existing cleanup script shell: which ovirt-hosted-engine-cleanup | cat register: ohes_cleanup - name: Debug ohes_cleanup.stdout debug: var: ohes_cleanup.stdout - name: Run Ovirt's Hosted Engine Cleanup Script shell: ovirt-hosted-engine-cleanup -q when: ohes_cleanup.stdout != "" - name: Clean old packages package: name: "{{item}}" state: absent with_items: - "*vdsm*" - "*ovirt*" - "*libvirt*" - "*cockpit*" - name: Remove old configs etc shell: "rm -rf /etc/{{item}}" args: warn: False with_items: - "/etc/*ovirt*" - "/etc/*vdsm*" - "/etc/libvirt/qemu/HostedEngine*" - "/etc/*libvirt*" - "/etc/guacamole" - "/etc/pki/vdsm" - "/etc/pki/libvirt" - "/etc/pki/CA" - "/etc/pki/keystore" - "/etc/ovirt-hosted-engine" - "/var/lib/libvirt/" - "/var/lib/vdsm/" - "/var/lib/ovirt-hosted-engine-*" - "/var/log/ovirt-hosted-engine-setup/" - "/var/cache/libvirt/" - "/etc/libvirt/nwfilter/vdsm-no-mac-spoofing.xml" - "/var/cache/tomcat/temp/*" - "/var/cache/tomcat/work/Catalina/localhost/*" - "/usr/share/tomcat/webapps/guacamole" - "/usr/share/tomcat/webapps/guacamole.war" - "/etc/guacamole/extensions/guacamole*" - name: Clean old repo files shell: "rm -rf /etc/yum.repos.d/{{item}}" args: warn: False with_items: - "ovirt*" - "virt*" - name: clean interface configs shell: "rm -rf /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt" args: warn: False - name: clean network stuff shell: "{{item}}" args: warn: False with_items: - "brctl delbr ovirtmgmt | cat" - "ip link del ovirtmgmt | cat" - "ip link del dummy0 | cat" - "ip link del virbr0 | cat" - "ip link del virbr0-nic | cat" - 'ip link del \;vdsmdummy\; | cat'

1 1

LDAP logins do not work
by Michael Watters 14 Jun '18

14 Jun '18

I've ran the ovirt-engine-extension-aaa-ldap-setup command to configure LDAP authentication using Active Directory however I am unable to authenticate using valid credentials. Here is the output show while testing the login flow. [ INFO ] Executing login sequence... Login output: 2018-06-13 11:27:17,931-04 INFO ======================================================================== 2018-06-13 11:27:17,960-04 INFO ============================ Initialization ============================ 2018-06-13 11:27:17,960-04 INFO ======================================================================== 2018-06-13 11:27:17,999-04 INFO Loading extension 'example.com-authn' 2018-06-13 11:27:18,072-04 INFO Extension 'example.com-authn' loaded 2018-06-13 11:27:18,077-04 INFO Loading extension 'example.com-authz' 2018-06-13 11:27:18,089-04 INFO Extension 'example.com-authz' loaded 2018-06-13 11:27:18,090-04 INFO Initializing extension 'example.com-authn' 2018-06-13 11:27:18,091-04 INFO [ovirt-engine-extension-aaa-ldap.authn::example.com-authn] Creating LDAP pool 'authz' 2018-06-13 11:27:19,574-04 WARNING Exception: 80090308: LdapErr: DSID-0C09042A, comment: AcceptSecurityContext error, data 52e, v3839 2018-06-13 11:27:19,576-04 INFO [ovirt-engine-extension-aaa-ldap.authn::example.com-authn] Creating LDAP pool 'authn' 2018-06-13 11:27:20,668-04 INFO [ovirt-engine-extension-aaa-ldap.authn::example.com-authn] LDAP pool 'authn' information: vendor='null' version='null' 2018-06-13 11:27:20,674-04 WARNING Ignoring records from pool: 'authz' 2018-06-13 11:27:20,676-04 WARNING Ignoring records from pool: 'authz' 2018-06-13 11:27:20,676-04 INFO Extension 'example.com-authn' initialized 2018-06-13 11:27:20,677-04 INFO Initializing extension 'example.com-authz' 2018-06-13 11:27:20,679-04 INFO [ovirt-engine-extension-aaa-ldap.authz::example.com-authz] Creating LDAP pool 'authz' 2018-06-13 11:27:21,270-04 WARNING Exception: 80090308: LdapErr: DSID-0C09042A, comment: AcceptSecurityContext error, data 52e, v3839 2018-06-13 11:27:21,273-04 INFO [ovirt-engine-extension-aaa-ldap.authz::example.com-authz] Creating LDAP pool 'gc' 2018-06-13 11:27:22,065-04 WARNING Exception: 80090308: LdapErr: DSID-0C090400, comment: AcceptSecurityContext error, data 52e, v1db1 2018-06-13 11:27:22,069-04 WARNING Ignoring records from pool: 'authz' 2018-06-13 11:27:22,072-04 WARNING Ignoring records from pool: 'authz' 2018-06-13 11:27:22,085-04 WARNING Ignoring records from pool: 'authz' 2018-06-13 11:27:22,086-04 INFO [ovirt-engine-extension-aaa-ldap.authz::example.com-authz] Available Namespaces: [] 2018-06-13 11:27:22,087-04 INFO Extension 'example.com-authz' initialized 2018-06-13 11:27:22,088-04 INFO Start of enabled extensions list 2018-06-13 11:27:22,089-04 INFO Instance name: 'example.com-authz', Extension name: 'ovirt-engine-extension-aaa-ldap.authz', Version: '1.3.7', Notes: 'Display name: ovirt-engine-extension-aaa-ldap-1.3.7-1.el7.centos', License: 'ASL 2.0', Home: 'http://www.ovirt.org', Author 'The oVirt Project', Build interface Version: '0', File: '/tmp/tmpPQluAI/extensions.d/example.com-authz.properties', Initialized: 'true' 2018-06-13 11:27:22,089-04 INFO Instance name: 'example.com-authn', Extension name: 'ovirt-engine-extension-aaa-ldap.authn', Version: '1.3.7', Notes: 'Display name: ovirt-engine-extension-aaa-ldap-1.3.7-1.el7.centos', License: 'ASL 2.0', Home: 'http://www.ovirt.org', Author 'The oVirt Project', Build interface Version: '0', File: '/tmp/tmpPQluAI/extensions.d/example.com-authn.properties', Initialized: 'true' 2018-06-13 11:27:22,090-04 INFO End of enabled extensions list 2018-06-13 11:27:22,090-04 INFO ======================================================================== 2018-06-13 11:27:22,090-04 INFO ============================== Execution =============================== 2018-06-13 11:27:22,091-04 INFO ======================================================================== 2018-06-13 11:27:22,091-04 INFO Iteration: 0 2018-06-13 11:27:22,093-04 INFO Profile='example.com' authn='example.com-authn' authz='example.com-authz' mapping='null' 2018-06-13 11:27:22,094-04 INFO API: -->Authn.InvokeCommands.AUTHENTICATE_CREDENTIALS profile='example.com' user='d861703' 2018-06-13 11:27:22,251-04 INFO API: <--Authn.InvokeCommands.AUTHENTICATE_CREDENTIALS profile='example.com' result=CREDENTIALS_INCORRECT 2018-06-13 11:27:22,262-04 SEVERE Authn.Result code is: CREDENTIALS_INCORRECT [ ERROR ] Login sequence failed Does anybody know what LdapErr: DSID-0C09042A, comment: AcceptSecurityContext error, data 52e, v3839 means? Is this a TLS issue? I am quite certain the password I'm using is correct.

2 4

VM created is reachable from only oVirt node
by sweettriplek＠gmail.com 14 Jun '18

14 Jun '18

VM running with centos is not reaching to any other network other than oVirt node. I tried to apply no network filer, clean-filter while creating vNIC interfaces but no luck. Setup configurations: - oVirt Engine and Node running on different machines - OVirt running on cent OS Please help me to resolve this issue, thanks in advance.

2 2

guests crashing during live migration(NUMA config issue)
by Balg, Andreas 14 Jun '18

14 Jun '18

Hello, during updates of our physical nodes running ovirt 4.2.3 I had to live- migrate all VMs to evacuate them from the hosts. This caused roughly 10% of guests to end up crashed /shutdown after live migration. Errors in the Logs are: 2018-05-31T15:15:51.273805Z qemu-kvm: warning: All CPU(s) up to maxcpus should be described in NUMA config, ability to start up with partial NUMA mappings is obsoleted and will be removed in future 2018-05-31T15:16:54.596554Z qemu-kvm: Unknown combination of migration flags: 0 2018-05-31T15:16:54.597196Z qemu-kvm: error while loading state section id 3(ram) 2018-05-31T15:16:54.598491Z qemu-kvm: load of migration failed: Invalid argument 2018-05-31 15:16:55.010+0000: shutting down, reason=crashed is there anything I can do about this? The hardware of all nodes is 100% identical -- Andreas Balg

3 6

VM is reachable only from oVirt node
by sweettriplek＠gmail.com 14 Jun '18

14 Jun '18

VM running with centos is not reaching to any other network other than oVirt node. I tried to apply no network filer, clean-filter while creating vNIC interfaces but no luck. Setup configurations: - oVirt Engine and Node running on different machines - OVirt running on cent OS Please help me to resolve this issue, thanks in advance.

1 0

VM is reachable only from oVirt node
by sweettriplek＠gmail.com 14 Jun '18

14 Jun '18

VM running with centos is not reaching to any other network other than oVirt node. I tried to apply no network filer, clean-filter while creating vNIC interfaces but no luck. Setup configurations: - oVirt Engine and Node running on different machines - OVirt running on cent OS Please help me to resolve this issue, thanks in advance.

1 0

Hosted engine cannot migrate
by Callum Smith 14 Jun '18

14 Jun '18

Dear All, Getting an issue where the HE can't b migrated, the log is full of: "VM HostedEngine is down with error. Exit message: resource busy: Failed to acquire lock: Lease is held by another host." engine.log attached Regards, Callum -- Callum Smith Research Computing Core Wellcome Trust Centre for Human Genetics University of Oxford e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk>

2 6

VM hanging at boot - [drm] Initialized qxl
by Leo David 14 Jun '18

14 Jun '18

Hello everyone, I have some Centos7 vms created from template ( CentOS 7 Generic Cloud Image v1802 for x86_64 ) I have alocated planty of resources to them, but they all have this issue when starting, they hang with the following message in console about 5-7 minutes. [drm] Initialized qxl 0.1.0 20120117 for 0000:00:02:0 on mirror 0 After a while, vm eventually boots up... Running self-hosted ovirt-node 4.2 Does anyone know what could be the issue for this behavior ? Thank you ! -- Best regards, Leo David

1 1

Question re: MaxFreeMemoryforOverUtlized and MinFreeMemoryforUnderUtilized
by Alastair Neil 14 Jun '18

14 Jun '18

Can someone clarify these setting for me, I am having difficulty parsing what exactly they mean. They seem to me to be backwards. If I wish to set a threshold at which I want my host to be consider over utilized, not schedule any new VMs, and migrate VMs away, then surely I should specify a minimum threshold of free memory. I.E. if free memory drops below my threshold (OR memory use exceed a maximum threshold) migrate VM's off of this system. Conversely if a system is underutilized I should set a maximum threshold of free memory (Or minimum used memory). Thanks, --Alastair

2 3

Centos7.5 or Ovirt node for new hci build?
by Jayme 13 Jun '18

13 Jun '18

I'm about to build a 3 host Ovirt hyperconverged cluster and was wondering if it's recommended to use straight up Centos or would Ovirt node be a better choice? Thanks

2 1

trouble with hosted-engine vm.conf after upgrade to 4.2
by Reznikov Alexei 13 Jun '18

13 Jun '18

Hi list! I upgrade my ovirt test lab from 4.1.9 to 4.2.2, and i have trouble with the hosted-engine... I can not start the hosted engine with my vm.conf... /hosted-engine --vm-start --vm-conf=/root/vm.conf/ /Command VM.getStats with args {'vmID': 'a19b9120-4f87-4a04-8cb6-c3e192a98052'} failed:// //(code=1, message=Virtual machine does not exist: {'vmId': u'a19b9120-4f87-4a04-8cb6-c3e192a98052'})// / VM HE start is Ok, but without my parameter, i change emulated_machine to *pc-i440fx-rhel7.5.0* in my vm.conf, but i see this: /ps ax | grep Hosted/ /...../ /r-key.aes -machine //*pc-i440fx-rhel7.3.0*//,accel=kvm,usb=off,dump-guest-core=off -cpu Nehalem -m size=2097152k,slots=16,maxmem=8388608k -realtime mlock=off -smp 2,maxcpus=16,sockets=16,cores=1,/ /...../ My ovirt packages: vdsm-4.20.30-1.el7.x86_64 libvirt-3.9.0-14.el7_5.5.x86_64 qemu-kvm-ev-2.10.0-21.el7_5.3.1.x86_64 Centos 7.5.1804 This is critical for me, please help fix this! Thanks, Alex. //

1 0

Failed to update VMs/Templates OVF data
by Albl, Oliver 13 Jun '18

13 Jun '18

Hi, I have a FC storage domain reporting the following messages every hour: VDSM command SetVolumeDescriptionVDS failed: Could not acquire resource. Probably resource factory threw an exception.: () Failed to update OVF disks cb04b55c-10fb-46fe-b9de-3c133a94e6a5, OVF data isn't updated on those OVF stores (Data Center VMTEST, Storage Domain VMHOST_LUN_62). Failed to update VMs/Templates OVF data for Storage Domain VMHOST_LUN_62 in Data Center VMTEST. Trying to manually update OVF results in "Error while executing action UpdateOvfStoreForStorageDomain: Internal Engine Error" I run oVirt 4.2.3.5-1.el7.centos on CentOS 7.5 (3.10.0-862.3.2.el7.x86_64) with vdsm-4.20.27.1-1.el7.centos.x86_64 Engine log: 2018-06-13 12:15:35,649+02 WARN [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] (default task-12) [092d8f27-c0a4-4d78-a8cb-f4738aff71e6] The message key 'UpdateOvfStoreForStorageDomain' is missing from 'bundles/ExecutionMessages' 2018-06-13 12:15:35,655+02 INFO [org.ovirt.engine.core.bll.storage.domain.UpdateOvfStoreForStorageDomainCommand] (default task-12) [092d8f27-c0a4-4d78-a8cb-f4738aff71e6] Lock Acquired to object 'EngineLock:{exclusiveLocks='[3edb5295-3797-4cd0-9b43-f46ec1ee7b14=OVF_UPDATE, 373efd46-8aea-4d0e-96cc-1da0debf72d0=STORAGE]', sharedLocks=''}' 2018-06-13 12:15:35,660+02 INFO [org.ovirt.engine.core.bll.storage.domain.UpdateOvfStoreForStorageDomainCommand] (default task-12) [092d8f27-c0a4-4d78-a8cb-f4738aff71e6] Running command: UpdateOvfStoreForStorageDomainCommand internal: false. Entities affected : ID: 373efd46-8aea-4d0e-96cc-1da0debf72d0 Type: StorageAction group MANIPULATE_STORAGE_DOMAIN with role type ADMIN 2018-06-13 12:15:35,670+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStoragePoolCommand] (default task-12) [4fd5b59a] Running command: ProcessOvfUpdateForStoragePoolCommand internal: true. Entities affected : ID: 3edb5295-3797-4cd0-9b43-f46ec1ee7b14 Type: StoragePool 2018-06-13 12:15:35,674+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStoragePoolCommand] (default task-12) [4fd5b59a] Attempting to update VM OVFs in Data Center 'VMTEST' 2018-06-13 12:15:35,678+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStoragePoolCommand] (default task-12) [4fd5b59a] Successfully updated VM OVFs in Data Center 'VMTEST' 2018-06-13 12:15:35,678+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStoragePoolCommand] (default task-12) [4fd5b59a] Attempting to update template OVFs in Data Center 'VMTEST' 2018-06-13 12:15:35,678+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStoragePoolCommand] (default task-12) [4fd5b59a] Successfully updated templates OVFs in Data Center 'VMTEST' 2018-06-13 12:15:35,678+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStoragePoolCommand] (default task-12) [4fd5b59a] Attempting to remove unneeded template/vm OVFs in Data Center 'VMTEST' 2018-06-13 12:15:35,680+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStoragePoolCommand] (default task-12) [4fd5b59a] Successfully removed unneeded template/vm OVFs in Data Center 'VMTEST' 2018-06-13 12:15:35,684+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStoragePoolCommand] (default task-12) [4fd5b59a] Lock freed to object 'EngineLock:{exclusiveLocks='[3edb5295-3797-4cd0-9b43-f46ec1ee7b14=OVF_UPDATE, 373efd46-8aea-4d0e-96cc-1da0debf72d0=STORAGE]', sharedLocks=''}' 2018-06-13 12:15:35,704+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStorageDomainCommand] (default task-12) [24485c23] Lock Acquired to object 'EngineLock:{exclusiveLocks='[]', sharedLocks='[3edb5295-3797-4cd0-9b43-f46ec1ee7b14=OVF_UPDATE]'}' 2018-06-13 12:15:35,714+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStorageDomainCommand] (default task-12) [24485c23] Running command: ProcessOvfUpdateForStorageDomainCommand internal: true. Entities affected : ID: 373efd46-8aea-4d0e-96cc-1da0debf72d0 Type: StorageAction group MANIPULATE_STORAGE_DOMAIN with role type ADMIN 2018-06-13 12:15:35,724+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] START, SetVolumeDescriptionVDSCommand( SetVolumeDescriptionVDSCommandParameters:{storagePoolId='3edb5295-3797-4cd0-9b43-f46ec1ee7b14', ignoreFailoverLimit='false', storageDomainId='373efd46-8aea-4d0e-96cc-1da0debf72d0', imageGroupId='cb04b55c-10fb-46fe-b9de-3c133a94e6a5', imageId='a1e7554d-530c-4c07-a4b5-459a1c509e39'}), log id: 747d674f 2018-06-13 12:15:35,724+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] -- executeIrsBrokerCommand: calling 'setVolumeDescription', parameters: 2018-06-13 12:15:35,724+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] ++ spUUID=3edb5295-3797-4cd0-9b43-f46ec1ee7b14 2018-06-13 12:15:35,724+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] ++ sdUUID=373efd46-8aea-4d0e-96cc-1da0debf72d0 2018-06-13 12:15:35,724+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] ++ imageGroupGUID=cb04b55c-10fb-46fe-b9de-3c133a94e6a5 2018-06-13 12:15:35,724+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] ++ volUUID=a1e7554d-530c-4c07-a4b5-459a1c509e39 2018-06-13 12:15:35,724+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] ++ description={"Updated":false,"Last Updated":"Thu May 24 12:02:22 CEST 2018","Storage Domains":[{"uuid":"373efd46-8aea-4d0e-96cc-1da0debf72d0"}],"Disk Description":"OVF_STORE"} 2018-06-13 12:15:35,827+02 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] Failed in 'SetVolumeDescriptionVDS' method 2018-06-13 12:15:35,831+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-12) [24485c23] EVENT_ID: IRS_BROKER_COMMAND_FAILURE(10,803), VDSM command SetVolumeDescriptionVDS failed: Could not acquire resource. Probably resource factory threw an exception.: () 2018-06-13 12:15:35,831+02 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] Command 'SetVolumeDescriptionVDSCommand( SetVolumeDescriptionVDSCommandParameters:{storagePoolId='3edb5295-3797-4cd0-9b43-f46ec1ee7b14', ignoreFailoverLimit='false', storageDomainId='373efd46-8aea-4d0e-96cc-1da0debf72d0', imageGroupId='cb04b55c-10fb-46fe-b9de-3c133a94e6a5', imageId='a1e7554d-530c-4c07-a4b5-459a1c509e39'})' execution failed: IRSGenericException: IRSErrorException: Failed to SetVolumeDescriptionVDS, error = Could not acquire resource. Probably resource factory threw an exception.: (), code = 855 2018-06-13 12:15:35,831+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SetVolumeDescriptionVDSCommand] (default task-12) [24485c23] FINISH, SetVolumeDescriptionVDSCommand, log id: 747d674f 2018-06-13 12:15:35,831+02 WARN [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStorageDomainCommand] (default task-12) [24485c23] failed to update domain '373efd46-8aea-4d0e-96cc-1da0debf72d0' ovf store disk 'cb04b55c-10fb-46fe-b9de-3c133a94e6a5' 2018-06-13 12:15:35,834+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-12) [24485c23] EVENT_ID: UPDATE_FOR_OVF_STORES_FAILED(1,016), Failed to update OVF disks cb04b55c-10fb-46fe-b9de-3c133a94e6a5, OVF data isn't updated on those OVF stores (Data Center VMTEST, Storage Domain HOST_LUN_62). 2018-06-13 12:15:35,843+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-12) [24485c23] EVENT_ID: UPDATE_OVF_FOR_STORAGE_DOMAIN_FAILED(190), Failed to update VMs/Templates OVF data for Storage Domain VMHOST_LUN_62 in Data Center VMTEST. 2018-06-13 12:15:35,846+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStorageDomainCommand] (default task-12) [24485c23] Lock freed to object 'EngineLock:{exclusiveLocks='[]', sharedLocks='[3edb5295-3797-4cd0-9b43-f46ec1ee7b14=OVF_UPDATE]'}' 2018-06-13 12:15:36,031+02 INFO [org.ovirt.engine.core.bll.SerialChildCommandsExecutionCallback] (EE-ManagedThreadFactory-engineScheduled-Thread-60) [24485c23] Command 'ProcessOvfUpdateForStorageDomain' id: 'a887910e-39a1-4120-a29b-76741ade8bf6' child commands '[]' executions were completed, status 'SUCCEEDED' 2018-06-13 12:15:37,052+02 INFO [org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStorageDomainCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-31) [24485c23] Ending command 'org.ovirt.engine.core.bll.storage.ovfstore.ProcessOvfUpdateForStorageDomainCommand' successfully. 2018-06-13 12:15:37,059+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-31) [24485c23] EVENT_ID: USER_UPDATE_OVF_STORE(199), OVF_STORE for domain VMHOST_LUN_62 was updated by <user>@>domain>@<DOMAIN>-authz. vdsm.log 2018-06-13 12:15:35,727+0200 INFO (jsonrpc/7) [vdsm.api] START setVolumeDescription(sdUUID=u'373efd46-8aea-4d0e-96cc-1da0debf72d0', spUUID=u'3edb5295-3797-4cd0-9b43-f46ec1ee7b14', imgUUID=u'cb04b55c-10fb-46fe-b9de-3c133a94e6a5', volUU ID=u'a1e7554d-530c-4c07-a4b5-459a1c509e39', description=u'{"Updated":false,"Last Updated":"Thu May 24 12:02:22 CEST 2018","Storage Domains":[{"uuid":"373efd46-8aea-4d0e-96cc-1da0debf72d0"}],"Disk Description":"OVF_STORE"}', options=Non e) from=::ffff:<IP>,54686, flow_id=24485c23, task_id=70941873-0296-4ed0-94c8-b51290cd6963 (api:46) 2018-06-13 12:15:35,825+0200 WARN (jsonrpc/7) [storage.ResourceManager] Resource factory failed to create resource '01_img_373efd46-8aea-4d0e-96cc-1da0debf72d0.cb04b55c-10fb-46fe-b9de-3c133a94e6a5'. Canceling request. (resourceManager :543) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/storage/resourceManager.py", line 539, in registerResource obj = namespaceObj.factory.createResource(name, lockType) File "/usr/lib/python2.7/site-packages/vdsm/storage/resourceFactories.py", line 193, in createResource lockType) File "/usr/lib/python2.7/site-packages/vdsm/storage/resourceFactories.py", line 122, in __getResourceCandidatesList imgUUID=resourceName) File "/usr/lib/python2.7/site-packages/vdsm/storage/image.py", line 206, in getChain if len(uuidlist) == 1 and srcVol.isShared(): File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line 1434, in isShared return self._manifest.isShared() File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line 141, in isShared return self.getVolType() == sc.type2name(sc.SHARED_VOL) File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line 134, in getVolType self.voltype = self.getMetaParam(sc.VOLTYPE) File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line 118, in getMetaParam meta = self.getMetadata() File "/usr/lib/python2.7/site-packages/vdsm/storage/blockVolume.py", line 112, in getMetadata md = VolumeMetadata.from_lines(lines) File "/usr/lib/python2.7/site-packages/vdsm/storage/volumemetadata.py", line 103, in from_lines "Missing metadata key: %s: found: %s" % (e, md)) MetaDataKeyNotFoundError: Meta Data key not found error: ("Missing metadata key: 'DOMAIN': found: {}",) 2018-06-13 12:15:35,825+0200 WARN (jsonrpc/7) [storage.ResourceManager.Request] (ResName='01_img_373efd46-8aea-4d0e-96cc-1da0debf72d0.cb04b55c-10fb-46fe-b9de-3c133a94e6a5', ReqID='dc9ebbc2-5cfa-447d-b2be-40ed2cf81992') Tried to cancel a processed request (resourceManager:187) 2018-06-13 12:15:35,825+0200 INFO (jsonrpc/7) [vdsm.api] FINISH setVolumeDescription error=Could not acquire resource. Probably resource factory threw an exception.: () from=::ffff:<IP>,54686, flow_id=24485c23, task_id=70941873 -0296-4ed0-94c8-b51290cd6963 (api:50) 2018-06-13 12:15:35,825+0200 ERROR (jsonrpc/7) [storage.TaskManager.Task] (Task='70941873-0296-4ed0-94c8-b51290cd6963') Unexpected error (task:875) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 882, in _run return fn(*args, **kargs) File "<string>", line 2, in setVolumeDescription File "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 48, in method ret = func(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/storage/hsm.py", line 1294, in setVolumeDescription pool.setVolumeDescription(sdUUID, imgUUID, volUUID, description) File "/usr/lib/python2.7/site-packages/vdsm/storage/securable.py", line 79, in wrapper return method(self, *args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/storage/sp.py", line 2011, in setVolumeDescription with rm.acquireResource(img_ns, imgUUID, rm.EXCLUSIVE): File "/usr/lib/python2.7/site-packages/vdsm/storage/resourceManager.py", line 1025, in acquireResource return _manager.acquireResource(namespace, name, lockType, timeout=timeout) File "/usr/lib/python2.7/site-packages/vdsm/storage/resourceManager.py", line 475, in acquireResource raise se.ResourceAcqusitionFailed() ResourceAcqusitionFailed: Could not acquire resource. Probably resource factory threw an exception.: () 2018-06-13 12:15:35,826+0200 INFO (jsonrpc/7) [storage.TaskManager.Task] (Task='70941873-0296-4ed0-94c8-b51290cd6963') aborting: Task is aborted: u'Could not acquire resource. Probably resource factory threw an exception.: ()' - code 100 (task:1181) 2018-06-13 12:15:35,826+0200 ERROR (jsonrpc/7) [storage.Dispatcher] FINISH setVolumeDescription error=Could not acquire resource. Probably resource factory threw an exception.: () (dispatcher:82) 2018-06-13 12:15:35,826+0200 INFO (jsonrpc/7) [jsonrpc.JsonRpcServer] RPC call Volume.setDescription failed (error 855) in 0.10 seconds (__init__:573) 2018-06-13 12:15:38,953+0200 INFO (jsonrpc/5) [api.host] START getAllVmStats() from=::ffff:<IP>,54666 (api:46) 2018-06-13 12:15:38,956+0200 INFO (jsonrpc/5) [api.host] FINISH getAllVmStats return={'status': {'message': 'Done', 'code': 0}, 'statsList': (suppressed)} from=::ffff:<IP>,54666 (api:52) 2018-06-13 12:15:38,957+0200 INFO (jsonrpc/5) [jsonrpc.JsonRpcServer] RPC call Host.getAllVmStats succeeded in 0.01 seconds (__init__:573) 2018-06-13 12:15:39,406+0200 INFO (jsonrpc/4) [vdsm.api] START getSpmStatus(spUUID=u'3edb5295-3797-4cd0-9b43-f46ec1ee7b14', options=None) from=::ffff:<IP>,54666, task_id=eabfe183-dfb0-4982-b7ea-beacca74aeef (api:46) 2018-06-13 12:15:39,410+0200 INFO (jsonrpc/4) [vdsm.api] FINISH getSpmStatus return={'spm_st': {'spmId': 2, 'spmStatus': 'SPM', 'spmLver': 20L}} from=::ffff:<IP>,54666, task_id=eabfe183-dfb0-4982-b7ea-beacca74aeef (api:52) 2018-06-13 12:15:39,410+0200 INFO (jsonrpc/4) [jsonrpc.JsonRpcServer] RPC call StoragePool.getSpmStatus succeeded in 0.01 seconds (__init__:573) 2018-06-13 12:15:39,416+0200 INFO (jsonrpc/1) [vdsm.api] START getStoragePoolInfo(spUUID=u'3edb5295-3797-4cd0-9b43-f46ec1ee7b14', options=None) from=::ffff:<IP>,54686, task_id=b2003a6f-dd74-47ab-b4f0-95ffb54dc51d (api:46) 2018-06-13 12:15:39,420+0200 INFO (jsonrpc/1) [vdsm.api] FINISH getStoragePoolInfo return={'info': {'name': 'No Description', 'isoprefix': '', 'pool_status': 'connected', 'lver': 20L, 'domains': u'373efd46-8aea-4d0e-96cc-1da0debf72d0: Active,9ed4b0d2-c555-4b27-8f88-75c47a99ad98:Attached,efd78d36-c395-4e9a-a46e-6059fa53756d:Active,3675435e-851e-4236-81da-fce1cc027238:Active', 'master_uuid': 'efd78d36-c395-4e9a-a46e-6059fa53756d', 'version': '4', 'spm_id': 2, 'type': 'FCP', 'master_ver': 12}, 'dominfo': {u'373efd46-8aea-4d0e-96cc-1da0debf72d0': {'status': u'Active', 'diskfree': '8722541707264', 'isoprefix': '', 'alerts': [], 'disktotal': '8795690369024', 'version': 4}, u'9ed4b0d2-c555-4b27-8f88-75c 47a99ad98': {'status': u'Attached', 'isoprefix': '', 'alerts': []}, u'efd78d36-c395-4e9a-a46e-6059fa53756d': {'status': u'Active', 'diskfree': '8718783610880', 'isoprefix': '', 'alerts': [], 'disktotal': '8795690369024', 'version': 4}, u'3675435e-851e-4236-81da-fce1cc027238': {'status': u'Active', 'diskfree': '8713280684032', 'isoprefix': '', 'alerts': [], 'disktotal': '8795690369024', 'version': 4}}} from=::ffff:<IP>,54686, task_id=b2003a6f-dd74-47ab-b4f0-95 ffb54dc51d (api:52) 2018-06-13 12:15:39,421+0200 INFO (jsonrpc/1) [jsonrpc.JsonRpcServer] RPC call StoragePool.getInfo succeeded in 0.01 seconds (__init__:573) All the best, Oliver

1 0

Useless disk statistics API
by Hari Prasanth Loganathan 13 Jun '18

13 Jun '18

Hi Team, I use the following API to get the disk statistics as per the oVirt rest API documentation. http://ovirt.github.io/ovirt-engine-api-model/4.2/#types/disk/links/statist… https://172.30.X.X/ovirt-engine/api/disks/f78c8adf-23f9-4f52-a29b-0de3d8446… { "statistic": [ { "kind": "gauge", "type": "decimal", "unit": "bytes_per_second", "values": { "value": [ { "datum": 0 } ] }, "disk": { "href": "/ovirt-engine/api/disks/f78c8adf-23f9-4f52-a29b-0de3d844652e", "id": "f78c8adf-23f9-4f52-a29b-0de3d844652e" }, "name": "data.current.read", "description": "Read data rate", "href": "/ovirt-engine/api/disks/f78c8adf-23f9-4f52-a29b-0de3d844652e/statistics/33b9212b-f9cb-3fd0-b364-248fb61e1272", "id": "33b9212b-f9cb-3fd0-b364-248fb61e1272" }, { "kind": "gauge", "type": "decimal", "unit": "bytes_per_second", "values": { "value": [ { "datum": 0 } ] }, "disk": { "href": "/ovirt-engine/api/disks/f78c8adf-23f9-4f52-a29b-0de3d844652e", "id": "f78c8adf-23f9-4f52-a29b-0de3d844652e" }, "name": "data.current.write", "description": "Write data rate", "href": "/ovirt-engine/api/disks/f78c8adf-23f9-4f52-a29b-0de3d844652e/statistics/2f23addd-4ebd-3d82-a449-c28778bc33eb", "id": "2f23addd-4ebd-3d82-a449-c28778bc33eb" } ] } Unfortunately, the values are always coming as '0'. *Steps to reproduce :* 1) I logged into the VM console and run the following command to copy the file and I see the write rate is 300mb/sec dd if=/dev/zero of=/dev/null 2) During this time, I am trying to execute this API and receiving as 0 always. Is this API useless? Thanks, Hari

2 9

ovirt error
by Арслан 13 Jun '18

13 Jun '18

hello. when executing the command traceback: |# hosted-engine --vm-status|| ||Traceback (most recent call last):|| || File "/usr/lib64/python2.6/runpy.py", line 122, in _run_module_as_main|| || "__main__", fname, loader, pkg_name)|| || File "/usr/lib64/python2.6/runpy.py", line 34, in _run_code|| || exec code in run_globals|| || File "/usr/lib/python2.6/site-packages/ovirt_hosted_engine_setup/vm_status.py", line 116, in <module>|| || if not status_checker.print_status():|| || File "/usr/lib/python2.6/site-packages/ovirt_hosted_engine_setup/vm_status.py", line 59, in print_status|| || all_host_stats = ha_cli.get_all_host_stats()|| || File "/usr/lib/python2.6/site-packages/ovirt_hosted_engine_ha/client/client.py", line 157, in get_all_host_stats|| || return self.get_all_stats(self.StatModes.HOST)|| || File "/usr/lib/python2.6/site-packages/ovirt_hosted_engine_ha/client/client.py", line 102, in get_all_stats|| || stats = broker.get_stats_from_storage(service)|| || File "/usr/lib/python2.6/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 232, in get_stats_from_storage|| || result = self._checked_communicate(request)|| || File "/usr/lib/python2.6/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 260, in _checked_communicate|| || .format(message or response))|| ||ovirt_hosted_engine_ha.lib.exceptions.RequestError: Request failed: <type 'exceptions.OSError'> what is the reason? | -- С уважением, Кубанов Арслан Инженер Департамент сетевой интеграции ЛАНИТ 129075, г. Москва, Мурманский проезд, д. 14, корп. 1 Тел.: +7 (495) 967-6650 #18287 www.lanit.ru

2 5

FC Storage
by Carlos Cesario 12 Jun '18

12 Jun '18

Hi Folks, Could someone could suggest me what is the best way to usage FC Storage with oVirt ? Is there any wayt to create DataStorage like "VMware" with Luns? Or need I usage the LUNS as VM disks!? Sorry by compare with VMware, but cyurrently Im using VMware and planning to move to oVirt solution. Regards Carlos __

4 6

Unable to create new cluster
by Michael Watters 12 Jun '18

12 Jun '18

After upgrading my engine to the 4.2 release I'm receiving an uncaught exception error when I attempt to create a new cluster. Uncaught exception occurred. Please try reloading the page. Details: (TypeError) : Cannot read property 'b' of null Please have your administrator check the UI logs The UI logs show the following error: 2018-06-12 11:52:32,706-04 ERROR [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] (default task-23) [] Permutation name: AEA766696E550914FBFDA5936BC98453 2018-06-12 11:52:32,707-04 ERROR [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] (default task-23) [] Uncaught exception: com.google.gwt.core.client.JavaScriptException: (TypeError) : Cannot read property 'b' of null at org.ovirt.engine.ui.uicommonweb.Linq$ServerCpuPredicate.$test(Linq.java:139) at org.ovirt.engine.ui.uicommonweb.Linq$ServerCpuPredicate.test(Linq.java:139) at java.util.stream.Stream$FilterSpliterator.$lambda$0(Stream.java:632) [:1.8.0_171] at java.util.stream.Stream$FilterSpliterator$lambda$0$Type.accept(Stream.java:632) [:1.8.0_171] at java.util.Spliterators$IteratorSpliterator.$tryAdvance(Spliterators.java:459) [rt.jar:1.8.0_171] at java.util.Spliterators$IteratorSpliterator.tryAdvance(Spliterators.java:459) [rt.jar:1.8.0_171] at java.util.stream.Stream$FilterSpliterator.tryAdvance(Stream.java:628) [:1.8.0_171] at java.util.stream.Stream$StreamSource.$findFirst(Stream.java:799) [:1.8.0_171] at org.ovirt.engine.ui.uicommonweb.Linq.firstOrNull(Linq.java:75) at org.ovirt.engine.ui.uicommonweb.models.clusters.ClusterModel.$populateCPUList(ClusterModel.java:1895) at org.ovirt.engine.ui.uicommonweb.models.clusters.ClusterModel.$lambda$19(ClusterModel.java:1733) at org.ovirt.engine.ui.uicommonweb.models.clusters.ClusterModel$lambda$19$Type.onSuccess(ClusterModel.java:1733) at org.ovirt.engine.ui.frontend.Frontend$1.$onSuccess(Frontend.java:227) [frontend.jar:] at org.ovirt.engine.ui.frontend.Frontend$1.onSuccess(Frontend.java:227) [frontend.jar:] at org.ovirt.engine.ui.frontend.communication.OperationProcessor$1.$onSuccess(OperationProcessor.java:133) [frontend.jar:] at org.ovirt.engine.ui.frontend.communication.OperationProcessor$1.onSuccess(OperationProcessor.java:133) [frontend.jar:] at org.ovirt.engine.ui.frontend.communication.GWTRPCCommunicationProvider$5$1.$onSuccess(GWTRPCCommunicationProvider.java:270) [frontend.jar:] at org.ovirt.engine.ui.frontend.communication.GWTRPCCommunicationProvider$5$1.onSuccess(GWTRPCCommunicationProvider.java:270) [frontend.jar:] at com.google.gwt.user.client.rpc.impl.RequestCallbackAdapter.onResponseReceived(RequestCallbackAdapter.java:198) [gwt-servlet.jar:] at com.google.gwt.http.client.Request.$fireOnResponseReceived(Request.java:233) [gwt-servlet.jar:] at com.google.gwt.http.client.RequestBuilder$1.onReadyStateChange(RequestBuilder.java:409) [gwt-servlet.jar:] at Unknown.eval(webadmin-0.js) at com.google.gwt.core.client.impl.Impl.apply(Impl.java:236) [gwt-servlet.jar:] at com.google.gwt.core.client.impl.Impl.entry0(Impl.java:275) [gwt-servlet.jar:] at Unknown.eval(webadmin-0.js) Is there a way to resolve this or should I create a bug report?

2 2

Single node single node SelfHosted Hyperconverged
by Leo David 12 Jun '18

12 Jun '18

Hello everyone, Geetign stucked into this situation, and just wanted to know if it actually b done, or should I follow diffrent approach. I need to do this single instace deployment for a POC, with the evantual scale this setup up to 3 nodes in the future. I folowed this tuturial: https://www.ovirt.org/documentation/gluster-hyperconverged/chap-Single_node… But when i run gdeploy, i end up with this error: TASK [Run a shell script] ********************************************************************************************************************************************** failed: [10.10.8.101] (item=/usr/share/gdeploy/scripts/blacklist_all_disks.sh) => {"changed": true, "failed_when_result": true, "item": "/usr/share/gdeploy/scripts/blacklist_all_disks.sh", "msg": "non-zero return code", "rc": 1, "stderr": "Shared connection to 10.10.8.101 closed.\r\n", "stdout": "iscsiadm: No active sessions.\r\nThis script will prevent listing iscsi devices when multipath CLI is called\r\nwithout parameters, and so no LUNs will be discovered by applications like VDSM\r\n(oVirt, RHV) which shell-out to call `/usr/sbin/multipath` after target login\r\nJun 12 14:30:48 | 3614187705c01820022b002b00c52f72e2: map in use\r\nJun 12 14:30:48 | failed to remove multipath map 3614187705c01820022b002b00c52f72e\r\n", "stdout_lines": ["iscsiadm: No active sessions.", "This script will prevent listing iscsi devices when multipath CLI is called", "without parameters, and so no LUNs will be discovered by applications like VDSM", "(oVirt, RHV) which shell-out to call `/usr/sbin/multipath` after target login", "Jun 12 14:30:48 | 3614187705c01820022b002b00c52f72e2: map in use", "Jun 12 14:30:48 | failed to remove multipath map 3614187705c01820022b002b00c52f72e"]} to retry, use: --limit @/tmp/tmpbYZBC6/run-script.retry PLAY RECAP ************************************************************************************************************************************************************* 10.10.8.101 : ok=0 changed=0 unreachable=0 failed=1 This is my gdeploy.conf : [hosts] 10.10.8.101 [script1] action=execute ignore_script_errors=no file=/usr/share/gdeploy/scripts/grafton-sanity-check.sh -d sdb -h 10.10.8.111 [disktype] jbod [diskcount] 12 [stripesize] 256 [service1] action=enable service=chronyd [service2] action=restart service=chronyd [shell2] action=execute command=vdsm-tool configure --force [script3] action=execute file=/usr/share/gdeploy/scripts/blacklist_all_disks.sh ignore_script_errors=no [pv] action=create devices=sdb ignore_pv_errors=no [vg1] action=create vgname=gluster_vg_sdb pvname=sdb ignore_vg_errors=no [lv1] action=create poolname=gluster_thinpool_sdb ignore_lv_errors=no vgname=gluster_vg_sdb lvtype=thinpool size=804GB poolmetadatasize=4GB [lv2] action=create lvname=gluster_lv_engine ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/engine size=100GB lvtype=thick [lv3] action=create lvname=gluster_lv_data ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/data lvtype=thinlv poolname=gluster_thinpool_sdb virtualsize=400GB [lv4] action=create lvname=gluster_lv_vmstore ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/vmstore lvtype=thinlv poolname=gluster_thinpool_sdb virtualsize=400GB [selinux] yes [service3] action=restart service=glusterd slice_setup=yes [firewalld] action=add ports=111/tcp,2049/tcp,54321/tcp,5900/tcp,5900-6923/tcp,5666/tcp,16514/tcp,54322/tcp services=glusterfs [script2] action=execute file=/usr/share/gdeploy/scripts/disable-gluster-hooks.sh [shell3] action=execute command=usermod -a -G gluster qemu [volume1] action=create volname=engine transport=tcp key=group,storage.owner-uid,storage.owner-gid,network.ping-timeout,performance.strict-o-direct,network.remote-dio,cluster.granular-entry-heal value=virt,36,36,30,on,off,enable #brick_dirs=10.10.8.111:/gluster_bricks/engine/engine brick_dirs=/gluster_bricks/engine/engine ignore_volume_errors=no [volume2] action=create volname=data transport=tcp key=group,storage.owner-uid,storage.owner-gid,network.ping-timeout,performance.strict-o-direct,network.remote-dio,cluster.granular-entry-heal value=virt,36,36,30,on,off,enable #brick_dirs=10.10.8.111:/gluster_bricks/data/data brick_dirs=/gluster_bricks/data/data ignore_volume_errors=no [volume3] action=create volname=vmstore transport=tcp key=group,storage.owner-uid,storage.owner-gid,network.ping-timeout,performance.strict-o-direct,network.remote-dio,cluster.granular-entry-heal value=virt,36,36,30,on,off,enable #brick_dirs=10.10.8.111:/gluster_bricks/vmstore/vmstore brick_dirs=/gluster_bricks/vmstore/vmstore ignore_volume_errors=no Any thoughs on this ? Scratching my head in getting this sorted out.... Thank you very much ! Have a nice day ! -- Best regards, Leo David

2 4

UEFI
by Conrad Jones 12 Jun '18

12 Jun '18

Does ovirt support UEFI yet ? I saw some code reviews in gerrit. But I couldn't find it in my 4.23 install. I'm guessing it's not finished / released yet ?

3 3

Unable to authenticate using AD accounts
by Michael Watters 12 Jun '18

12 Jun '18

I am having an issue getting users to authenticate using the Active Directory backend. I've installed the ovirt-engine-extension-aaa-ldap-setup package and ran ovirt-engine-extension-aaa-ldap-setup to configure everything however users are unable to authenticate. Testing using my own account results in a "credentials incorrect" error as shown below. 2018-06-12 14:16:55,700-04 INFO End of enabled extensions list 2018-06-12 14:16:55,700-04 INFO ======================================================================== 2018-06-12 14:16:55,701-04 INFO ============================== Execution =============================== 2018-06-12 14:16:55,701-04 INFO ======================================================================== 2018-06-12 14:16:55,702-04 INFO Iteration: 0 2018-06-12 14:16:55,704-04 INFO Profile='dartcontainer.com' authn='dartcontainer.com-authn' authz='dartcontainer.com-authz' mapping='null' 2018-06-12 14:16:55,705-04 INFO API: -->Authn.InvokeCommands.AUTHENTICATE_CREDENTIALS profile='dartcontainer.com' user='d861703' 2018-06-12 14:16:55,869-04 INFO API: <--Authn.InvokeCommands.AUTHENTICATE_CREDENTIALS profile='dartcontainer.com' result=CREDENTIALS_INCORRECT 2018-06-12 14:16:55,879-04 SEVERE Authn.Result code is: CREDENTIALS_INCORRECT Is there a way to enable more verbose logging or is there an alternative to using LDAP such as keycloak integration?

1 0

Grubx64.efi missing from boot partition
by Hanson Turner 12 Jun '18

12 Jun '18

Hi Guys, We went to physically move a node and have found the node will not boot successfully anymore. The error coming up is :failed to open/ file not found: \EFI\BOOT\grubx64.efi This file is found in \EFI\centos\grubx64.efi. I have copied it to \EFI\BOOT\ and got the machine to boot, however, it has no working networking. Modifying /etc/sysconfig/ifcfg-xyzabz123 appropriately restored networking, however, the node is not able to be resumed/activated. This is probably because the blade reports the following interfaces: eno1, eno2, eno3, eno4 When originally deployed, they were eno1,eno2, eth0, eth1. The engine still sees the host as having the eno+eth combo. Any ideas guys? Thanks!

1 0

LDAP Authentication issues
by Callum Smith 12 Jun '18

12 Jun '18

Dear All, I'm having problems getting LDAP running, login works, but I'm getting "user is not authorised to perform login" - this is even if i specify the UserRole specifically to the LDAP group the user is in. 2018-05-25 08:56:16,212+01 INFO [org.ovirt.engine.core.sso.utils.AuthenticationUtils] (default task-23) [] User callum@Biomedical Research Computing successfully logged in with scopes: ovirt-app-admin ovirt-app-api ovirt-app-portal ovirt-ext=auth:sequence-priority=~ ovirt-ext=revoke:revoke-all ovirt-ext=token-info:authz-search ovirt-ext=token-info:public-authz-search ovirt-ext=token-info:validate ovirt-ext=token:password-access 2018-05-25 08:56:16,391+01 INFO [org.ovirt.engine.core.bll.aaa.CreateUserSessionCommand] (default task-25) [63e60fe9] Running command: CreateUserSessionCommand internal: false. 2018-05-25 08:56:16,430+01 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-25) [63e60fe9] EVENT_ID: USER_VDC_LOGIN_FAILED(114), User callum@Biomedical Research Computing connecting from '192.168.65.254' failed to log in<UNKNOWN>. 2018-05-25 08:56:16,430+01 ERROR [org.ovirt.engine.core.aaa.servlet.SsoPostLoginServlet] (default task-25) [] The user callum@Biomedical Research Computing is not authorized to perform login on a side note: is it possible to assign permissions to all members of an LDAP tree where they dont have a common group membership? Regards, Callum -- Callum Smith Research Computing Core Wellcome Trust Centre for Human Genetics University of Oxford e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk>

4 23

Unable to upgrade
by Michael Watters 12 Jun '18

12 Jun '18

I am attempting to upgrade from ovirt-engine 4.1 to 4.2 however yum updates are failing due to dependency conflicts. [root@ovirt-engine yum.repos.d]# yum update "ovirt-*-setup*" Loaded plugins: fastestmirror, versionlock Loading mirror speeds from cached hostfile * ovirt-4.2: mirrors.rit.edu * ovirt-4.2-epel: mirror.steadfast.net sac-gdeploy | 3.0 kB 00:00:00 Resolving Dependencies Error: ovirt-engine-setup-plugin-ovirt-engine conflicts with ovirt-engine-4.1.1.8-1.el7.centos.noarch Is there a way to resolve this? I'm using the instructions located at https://www.ovirt.org/release/4.2.1/#install--upgrade-from-previous-versions

2 1

Re: oVirt Metrics
by Karli Sjöberg 12 Jun '18

12 Jun '18

1 0

Re: oVirt Metrics
by Karli Sjöberg 12 Jun '18

12 Jun '18

3 3

engine-setup fails to upgrade postgresql
by Michael Watters 12 Jun '18

12 Jun '18

After installing the ovirt 4.2 repository and running engine-setup the upgrade script fails with an error as shown below. [ ERROR ] Postgresql client version is '9.5.9', whereas the version on 'localhost' is '9.2.23'. Please use a PostgreSQL server of version '9.5.9'. Please note the following required changes in postgresql.conf on 'localhost': postgresql.conf is usually in /var/lib/pgsql/data, /var/opt/rh/rh-postgresql95/lib/pgsql/data, or somewhere under /etc/postgresql* . You have to restart PostgreSQL after making these changes. Engine database host []: The setup script is supposed to take care of this automatically however it fails before even attempting to upgrade postgres. Does anybody know how to work around this?

3 3

Re: oVirt Metrics
by Karli Sjöberg 11 Jun '18

11 Jun '18

2 1

Hosted Engine w Gluster - increase number of hosts
by ovirt＠fateknollogee.com 11 Jun '18

11 Jun '18

Using this as reference: https://www.ovirt.org/blog/2018/02/up-and-running-with-ovirt-4-2-and-gluste… Assuming you want to increase the number of hosts from 3 to 5 or 9. How do you add more hosts? What is best practice & any gotcha's?

7 15

gdeploy hosted engine failed but host says it is up what now?
by william.dossett＠gmail.com 11 Jun '18

11 Jun '18

Hi, Ovirt 4.2.3 I gdeplyed deployed glusterfs which seems to have gone well and then on to the hosted engine... which seemed to be going well, but then the ovirt engine did not come online... [ INFO ] TASK [Wait for the engine to come up on the target VM] [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 120, "changed": true, "cmd": ["hosted-engine", "--vm-status", "--json"], "delta": "0:00:00.225200", "end": "2018-06-09 15:15:24.434531", "rc": 0, "start": "2018-06-09 15:15:24.209331", "stderr": "", "stderr_lines": [], "stdout": "{\"1\": {\"conf_on_shared_storage\": true, \"live-data\": true, \"extra\": \"metadata_parse_version=1\\nmetadata_feature_version=1\\ntimestamp=17346 (Sat Jun 9 15:15:19 2018)\\nhost-id=1\\nscore=3400\\nvm_conf_refresh_time=17346 (Sat Jun 9 15:15:19 2018)\\nconf_on_shared_storage=True\\nmaintenance=False\\nstate=EngineStarting\\nstopped=False\\n\", \"hostname\": \"usbou-rhev01.pbi.global.pvt\", \"host-id\": 1, \"engine-status\": {\"reason\": \"failed liveliness check\", \"health\": \"bad\", \"vm\": \"up\", \"detail\": \"Up\"}, \"score\": 3400, \"stopped\": false, \"maintenance\": false, \"crc32\": \"e3c31ac3\", \"local_conf_timestamp\": 17346, \"host-ts\": 17346}, \"global_maintenance\": false}", "stdout_lines": ["{\"1\": {\"conf_on_shared_storage\": true, \"live-data\": true, \"extra\": \"metadata_parse_version=1\\nmetadata_feature_version=1\\ntimestamp=17346 (Sat Jun 9 15:15:19 2018)\\nhost-id=1\\nscore=3400\\nvm_conf_refresh_time=17346 (Sat Jun 9 15:15:19 2018)\\nconf_on_shared_storage=True\\nmaintenance=False\\nstate=EngineStarting\\nstopped=False\\n\", \"hostname\": \"usbou-rhev01.pbi.global.pvt\", \"host-id\": 1, \"engine-status\": {\"reason\": \"failed liveliness check\", \"health\": \"bad\", \"vm\": \"up\", \"detail\": \"Up\"}, \"score\": 3400, \"stopped\": false, \"maintenance\": false, \"crc32\": \"e3c31ac3\", \"local_conf_timestamp\": 17346, \"host-ts\": 17346}, \"global_maintenance\": false}"]} When I look at the host now it says Hosted Engine is running on the host, Hosted engine is up, but I can not ping it, ssh to it or open the console on the VM. I am pretty new to this setup so would appreciate any steps I can take to move this forward. Thanks Bill

3 6

VMs hung after migration
by Kapetanakis Giannis 11 Jun '18

11 Jun '18

Hi, Please have a look at BZ https://bugzilla.redhat.com/show_bug.cgi?id=1584775 about VM hung problems I have with latest kernels. Problem appeared after upgrading to 4.2.3 but I believe it has only to do with newer kernel and not any part of ovirt/vdsm/libvirt/qemu regards, Giannis

3 2

Latency and Bandwidth for Disk level statistics
by Hari Prasanth Loganathan 11 Jun '18

11 Jun '18

Hi Team, I have created a VM using oVirt, which is in UP state now. 1) I opened the guest console using oVirt 2) I want to get the statistics for disk so I tried to create and write some content in the file (say test.txt) in loop to increase the latency and bandwidth in disk. 3) I observed that CPU in VM statistics is increased to 100 % (This is a good news since I expected this also) But when I looked into the disk level statistics using the following API, I observe the data value as '0' always. https://172.30.X.X/ovirt-engine/api/disks/3bc267c0-a797-4e98-8ae9-217671649… { "statistic": [ { "kind": "gauge", "type": "decimal", "unit": "bytes_per_second", "values": { "value": [ { "datum": 0 } ] }, "disk": { "href": "/ovirt-engine/api/disks/3bc267c0-a797-4e98-8ae9-217671649287", "id": "3bc267c0-a797-4e98-8ae9-217671649287" }, "name": "data.current.read", "description": "Read data rate", "href": "/ovirt-engine/api/disks/3bc267c0-a797-4e98-8ae9-217671649287/statistics/33b9212b-f9cb-3fd0-b364-248fb61e1272", "id": "33b9212b-f9cb-3fd0-b364-248fb61e1272" }, { "kind": "gauge", "type": "decimal", "unit": "bytes_per_second", "values": { "value": [ { "datum": 0 } ] }, "disk": { "href": "/ovirt-engine/api/disks/3bc267c0-a797-4e98-8ae9-217671649287", "id": "3bc267c0-a797-4e98-8ae9-217671649287" }, "name": "data.current.write", "description": "Write data rate", "href": "/ovirt-engine/api/disks/3bc267c0-a797-4e98-8ae9-217671649287/statistics/2f23addd-4ebd-3d82-a449-c28778bc33eb", "id": "2f23addd-4ebd-3d82-a449-c28778bc33eb" } ] } *How can I increase the disk statistics using the VM Guest console?* *Any help is much appreciated.* Thanks, Hari

1 0

Hosted Engine: brick size...is this a bug?
by femi adegoke 11 Jun '18

11 Jun '18

I have now done the oVirt 4.2.3.1 install at least 5 times, no, I don't consider myself any kind of expert. Even though the HE uses less than 10gb of space for some reason the install will fail if the brick is less than 58gb. Why is that? Look at this error: [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[Problem while trying to mount target]". HTTP response code is 400. [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Problem while trying to mount target]\". HTTP response code is 400."} The size of the brick was set at 50gb: [lv1] action=create vgname=gluster_vg1 lvname=engine_lv lvtype=thick size=50GB mount=/gluster_bricks/engine Solution: Edit size to 60gb, re-run & voila, all is good. Is this a bug or maybe it's a problem with the way I'm doing things.

3 3

oVirt Version 4.2.3.5-1.el7.centos cannot change password from user (Bad Request)
by Alejandro Cortina 11 Jun '18

11 Jun '18

Hi there, I have created a new user from hosted engine by: ovirt-aaa-jdbc-tool user add test_user --attribute=description='test user' --attribute=firstName=test_user ovirt-aaa-jdbc-tool user password-reset test_user --password=pass:changeme then I try to login and I get the message: *Unable to log in because the password has expired. Change the password to proceed. * When I click "Change the password" the browser redirects to: https://FQDN/ovirt-engine/sso/%s and I get *Bad RequestYour browser sent a request that this server could not understand.* Last time I tried with 4.2.1 and it was working with no issues. Cheers, Alex

2 2

Snapshotting Oracle 11g on oVirt
by Vinícius Ferrão 10 Jun '18

10 Jun '18

Hello, I’m planning to install Oracle 11g on a VM inside oVirt. I already knew about the licensing hell of running Oracle 11g on a virtualized environment. The question is about snapshotting Oracle 11gb when the VM is running. Is this supported? For example, on VMware and XenServer there’s the quiesce option to make the filesystem, with a little help from the guest agent, to be in an a good state for snapshots. But in oVirt, how this is handled? If supported, which operating systems are compatible with the feature? Thanks,

3 2

Ovirt 4.2 SDK - Way to add files with CloudInit()
by atripathi＠hypergrid.com 10 Jun '18

10 Jun '18

Hi. I am using Ovirt 4.2 Java SDK. Quick query, can we add additional files to ~openstack/content and modify meta_data.json to point these files. I can see we can add files to .cloudInit(cloudInit().files(files)) But API ignores it .. I checked it on /var/log/ovirt-engine/engine.log as well as the img created and attached with VM Reference - Cloudinit version support such files cat meta_data.json {"files": [{"path": "/etc/injected_files", "content_path": "/content/0000"}, {"path": "/etc/trove/conf.d/guest_info.conf", "content_path": "/content/0001"}, {"path": "/etc/trove/conf.d/trove-guestagent.conf", "content_path": "/content/0002"}], reference https://bugs.launchpad.net/cloud-init/+bug/1602373

1 0

After minor upgrade oVirt Node to 4.2.3 can't start Virtual machine
by stefan.palecek＠x112.cz 10 Jun '18

10 Jun '18

Dear all, after upgrade oVirt Node to latest 4.2.3 I can't start any virtual machine with network interface. VM machine without network interface starts normally. Exactly the same situation is on freshly installed oVirt node machine with different hardware. I use openvswitch on both machines. After some searching I found out that there are the same version of openvswitch(2.9.0-3) on old and new version of oVirt node but different versions of libvirt(3.9.0-14 vs 3.2.0-14) Error message of libvirtd when the VM machine fail to start: VM OPNsense is down with error. Exit message: Unable to add bridge ovirtmgmt port vnet0: Operation not supported. Any suggestions? Thank you. Stefan

4 4

Upgrading ovirt 4.1 -> ovirt 4.2
by Alex K 10 Jun '18

10 Jun '18

Hi all, If one cannot perform a minor upgrade of ovirt 4.1 (due to surprisingly missing repos...) is it ok to ignore this and proceed directly to major upgrade to ovirt 4.2? I don't like very much the idea as I don't know to what surprises I will have considering that this is production. What is your experience/suggestions? Alex

2 1

ovirt and gluster network config
by william.dossett＠gmail.com 09 Jun '18

09 Jun '18

Hi, I have my 5 ovirt nodes up and running and starting to move forward with actual ovirt and gluster setup. I am using gdeploy for deployment. the play book fails saying /dev/sdb is blacklisted by filter? I am following the blog up and running on the ovirt site. It mentioned adding # disable multipath [script2] action=execute file=/usr/share/ansible/gdeploy/scripts/disable-multipath.sh to get it to work, but it does not work. The script 3 section after this does have the file=/usr/share/gdeploy/scripts/blacklist_all_disks.sh in it. What can I do to get past this? Also not sure if I should be modifying the script/play as I don't really want an arbitrator host - if I have 5 real hosts all with the same storage in them? (10TB in each) and it only account for 3 hosts, can I add the other two later or should I try to modify the playbook to include these initially? I am sure I will be setting this up several times before I get it right, but at the moment I can't get past this error. Any help would really be appreciated! Thanks

1 1

Re: Fwd: FreeBSD after 10.3 could not boot (Freeze)
by Karli Sjöberg 09 Jun '18

09 Jun '18

2 1

ansible role for setting up ovirt-engine development environment
by Greg Sheremeta 09 Jun '18

09 Jun '18

Hi all, I created an ansible role for setting up ovirt-engine development environment. If you are not familiar with ansible, it's a tool for getting a machine into a specific 'state'. A role is a 'type' of machine, like 'db server' or 'web server' or 'dev rig.' Roles are 'applied' to machines. So you can apply the ovirt-engine-devel role to setup a working development environment instantly. It works over ssh or locally. You can see it in action here: https://imgur.com/a/FwEkmy5? Known issues: - not tested on fc28 yet - not tested on EL yet - name -- in EL/Fedora -devel package names are a convention for something - idempotency needs fixing when code edited Improvements - gerrit setup - changing database name (multiple engine environments, etc.) code: https://github.com/gregsheremeta/ovirt-engine-devel-example https://github.com/gregsheremeta/ovirt-engine-devel Feedback welcome, and if you find it interesting, I'd love assistance :) Best wishes, Greg -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX Red Hat NA <https://www.redhat.com/> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig>

1 0

Unable to start VM on host with OVS networking
by Jonathan Dieter 08 Jun '18

08 Jun '18

I have a production ovirt setup that's gone through multiple updates over the years. At some point when 4.0 or 4.1 came out, I switched from legacy networking to OVS, and everything worked perfectly until I upgraded to 4.2. Since I upgraded to 4.2, I've been getting messages that the networks were all out of sync, but everything continued working properly. Today I tracked down the network sync problem, fixed it on one of my three hosts, and then attempted to start a VM on the host. It refused to start with the error message: "Unable to add bridge ovirtmgmt port vnet0: Operation not supported". From what I can tell, the xml being generated is still for the old legacy network. I completely reinstalled the node, using the latest 4.2.3 node ISO image, and it still doesn't work. In the cluster, the switch type is "OVS (Experimental)" (and this option can't be changed, apparently), the compatibility version is 4.2, the firewall type is firewalld and there's no "Default Network Provider". I suspect that my upgrades have somehow left my system in half OVS/half legacy mode, but I'm not sure how to move it all the way to OVS mode and I don't want to mess with the other two hosts until I'm sure I've got it figured out. My (compressed) vdsm.log is at https://www.lesbg.com/jdieter/vdsm.log.xz and my (compressed) supervdsm.log is at https://www.lesbg.com/jdieter/supervdsm.log.xz. If anyone could point me in the right direction to get this fixed, I'd sure appreciate it. Jonathan

5 8

Issue with console since recently
by Christophe TREFOIS 08 Jun '18

08 Jun '18

Hi, We performed no updates on our infrastructure and since today, on some guests (not all), we see the following error in the libvirtd logs 140085012483328:error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol:s23_srvr.c:640: (process:375537): Spice-WARNING **: reds-stream.c:469:reds_stream_ssl_accept: SSL_accept failed, error=1 Other guests works fine. We are trying from Mac with remote-viewer and we use OS Version: RHEL - 7 - 4.1708.el7.centos OS Description: CentOS Linux 7 (Core) Kernel Version: 3.10.0 - 693.el7.x86_64 KVM Version: 2.10.0 - 21.el7_5.3.1 LIBVIRT Version: libvirt-3.9.0-14.el7_5.5 VDSM Version: vdsm-4.19.45-1.el7.centos SPICE Version: 0.14.0 - 2.el7_5.3 CEPH Version: librbd1-0.94.5-2.el7 And latest virt-viewer. Could anybody help us to the right direction? Currently, we cannot access the console of those VMs and we have no idea why. Thanks,Trefex

1 0

restore Self-Hosted Engine
by thetas emmanuel 08 Jun '18

08 Jun '18

hi, I follow this doc https://www.ovirt.org/documentation/self-hosted/chap-Backing_up_and_Restori… But like others, i can't restore database I Have : pg_restore: [archiver (db)] Error while PROCESSING TOC: pg_restore: [archiver (db)] Error from TOC entry 7397; 0 0 COMMENT EXTENSION plpgsql pg_restore: [archiver (db)] could not execute query: ERROR: must be owner of extension plpgsql Command was: COMMENT ON EXTENSION plpgsql IS 'PL/pgSQL procedural language'; .. ... Any solution ? emmanuel

2 8

oVirt web console for VM
by Hari Prasanth Loganathan 08 Jun '18

08 Jun '18

Hi Team, I am able to 1) Create a VM 2) Create and Attach DISK and NIC 3) I powered on the VM but I am yet to provide the network configuration for it. So there is no IP assigned, It is in Green color with UP arrow. Now I need to connect to this virtual machine and login using Guest console, I saw a documentation : https://www.ovirt.org/documentation/how-to/guest-console/connect-to-guest-d… But it is not clear. *Use Case needed : * 1) oVirt is running in centOS say running in 172.1.1.1 2) I have a Ubuntu machine say 192.2.2.2, I used the Firefox browser to login to oVirt engine (172.1.1.1) 3) Since my VM is powered ON, I need to use the console to login from my browser. Please let me know the steps. If you need anymore information, please let me know. Thanks, Hari

3 7

Live snapshot using command line in ovirt 4.1
by Ranjith P 08 Jun '18

08 Jun '18

Hi, Please suggest how to take a VM snapshot using command line in ovirt 4.1. Thanks & Regards Ranjith Sent from Yahoo Mail. Get the app

1 0

Fwd: [CentOS-devel] [Cloud SIG] Rocky Milestone 2 RDO Test Days June 14-15
by Sandro Bonazzola 08 Jun '18

08 Jun '18

RDO team is going to have a test day for Rocky Milestone 2. I think it may be a good time for checking compatibility between oVirt and RDO Rocky (Glance, Neutron, Cinder) and report issues if any. ---------- Forwarded message ---------- From: Rain Leander <rleander(a)redhat.com> Date: 2018-06-07 20:23 GMT+02:00 Subject: [CentOS-devel] [Cloud SIG] Rocky Milestone 2 RDO Test Days June 14-15 To: centos-devel(a)centos.org Who’s up for a rematch? Rocky Milestone 2 is here and we’re ready to rumble! Join RDO [0] on June 14 & 15 for an awesome time of taking down bugs and fighting errors in the most recent release [1]. We certainly won’t be pulling any punches. Want to get in on the action? We’re looking for developers, users, operators, quality engineers, writers, and, yes, YOU. If you’re reading this, we think you’re a champion and we want your help! We’ll have packages for the following platforms: * RHEL 7 * CentOS 7 You’ll want a fresh install with latest updates installed so that there’s no hard-to-reproduce interactions with other things. We’ll be collecting feedback, writing up tickets, filing bugs, and answering questions. Even if you only have a few hours to spare, we’d love your help taking this new version for a spin to work out any kinks. Not only will this help identify issues early in the development process, but you can be the one of the first to cut your teeth on the latest versions of your favorite deployment methods like TripleO, PackStack, and Kolla. Interested? We’ll be gathering on #rdo (on Freenode IRC) for any associated questions / discussions, and working through the “Does it work?” tests [2]. Like Rocky said, “The world ain’t all sunshine and rainbows,” but with your help, we can keep moving forward and make the RDO world better for those around us. Hope to see you on the 14th & 15th! [0] https://www.rdoproject.org/ [1] https://www.rdoproject.org/testday/ [2] https://www.rdoproject.org/testday/tests/ -- K Rain Leander OpenStack Community Liaison Open Source and Standards Team https://www.rdoproject.org/ http://community.redhat.com _______________________________________________ CentOS-devel mailing list CentOS-devel(a)centos.org https://lists.centos.org/mailman/listinfo/centos-devel -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0

Error starting VM after update Ovirt node
by Spickiy Nikita 08 Jun '18

08 Jun '18

Hi, i upgraded oVirt node to 4.2.3.1 version. After upgrade I can not migrate VM or run VM on the node. After viewing logs file i find several errors. One of them: 2018-06-07 15:52:20,536+07 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-3) [] EVENT_ID: VM_DOWN_ERROR(119), VM ansible.example.com is down with error. Exit message: internal error: Process exited prior to exec: libvirt: Lock Driver error : Failed to ope n socket to sanlock daemon: Permission denied. I run setenforce 0 and VM can running on the node. audit2allow -a #============= setfiles_t ============== #!!!! WARNING: 'bin_t' is a base type. allow setfiles_t bin_t:file entrypoint; allow setfiles_t self:capability sys_chroot; #============= svirt_t ============== #!!!! The file '/rhev/data-center/mnt/10.10.10.100:_var_nfs-ovirt-iso-share_files/dbf9ff5d-2cd4-408e-8a9d-08d39fa9a58a/images/11111111-1111-1111-1111-111111111111/CentOS-7-x86_64-Minimal-1708.iso' is mislabeled on your system. #!!!! Fix with $ restorecon -R -v /rhev/data-center/mnt/10.10.10.100:_var_nfs-ovirt-iso-share_files/dbf9ff5d-2cd4-408e-8a9d-08d39fa9a58a/images/11111111-1111-1111-1111-111111111111/CentOS-7-x86_64-Minimal-1708.iso #!!!! This avc can be allowed using the boolean 'virt_use_nfs' allow svirt_t nfs_t:file open; #!!!! The file '/run/sanlock/sanlock.sock' is mislabeled on your system. #!!!! Fix with $ restorecon -R -v /run/sanlock/sanlock.sock #!!!! This avc can be allowed using the boolean 'virt_use_sanlock' allow svirt_t sanlock_t:unix_stream_socket connectto; I run restorecon -R -v /run/sanlock/sanlock.sock, but it did not help

1 0

Re: ovirt and gluster network config
by Bill Dossett 08 Jun '18

08 Jun '18

Sorry, I posted this under the wrong title as I had started a post about network config, then figured it out but started out this post without changing the subject ☹ Regards, Bill Bill Dossett Systems Architect Enterprise Cloud & Service Excellence Enterprise IT Services Pitney Bowes M +1 303 725 8163 bill.dossett(a)pb.com<mailto:bill.dossett@pb.com> pitneybowes.com Pitney Bowes Inc. 4750 Walnut St | Boulder, CO | 80301 Part of Engineering, Software Support or Professional Services? Raise a ticket via Remedy Anywhere [HERE<teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.…>] takes less than a minute CloudForms User Guide available [HERE<https://teamsite.inside.pb.com/sites/TCPPM/GES/SiteAssets/TC%20Knowledge%20…>]

1 0

[ANN] oVirt 4.2.4 Third Release Candidate is now available
by Lev Veyde 07 Jun '18

07 Jun '18

The oVirt Project is pleased to announce the availability of the oVirt 4.2.4 Third Release Candidate, as of June 7th, 2018. This update is a release candidate of the fourth in a series of stabilization updates to the 4.2 series. This is pre-release software. This pre-release should not to be used in production. This release is available now for: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node is available [2] Additional Resources: * Read more about the oVirt 4.2.4 release highlights: http://www.ovirt.org/release/4.2.4/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.4/ [2] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/ -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

Can't login into ovirt api
by Guilhem Berna 07 Jun '18

07 Jun '18

Hi, I'm trying to login into the ovirt api under ovirt 4.2 but the admin account user for the administration portal doesn't work. Maybe It created another api account at installation but i don't recall it. I'm unable to find any documentation regarding user management and api access. Can someone point me in the right direction ? Best regards, Guilhem Berna Sysadmin PHOSPHORE.si - [ https://www.phosphore.si/ | https://www.phosphore.si ]

2 1

The equivalence of the DiskAttachment ID and its relevant Disk ID should be intuitively documented.
by Joey Ma 07 Jun '18

07 Jun '18

Hi all, In these days, I was struggling to find the relationship among vm/disk/disk-attachment. I just found that the IDs of DiskAttachment and relevant Disk are the same, in the mapping phrase by [1]. This is a extremely helpful for connecting the disk and the disk-attachment, especially when updating a disk by its relevant disk-attachment instance. Nevertheless it's missing in the API document [2]. Adding a intuitive hint would be highly appreciated. Thanks. [1]: https://github.com/oVirt/ovirt-engine/blob/68753f46f09419ddcdbb632453501273… [2]: http://ovirt.github.io/ovirt-engine-api-model/4.3/#types/disk_attachment

1 0

Re: Hey, guys, I have a trouble with ovirt OVN.
by Petr Horacek 07 Jun '18

07 Jun '18

Hi Marcin, do you see what could be the problem here? Maybe I'm missing something. 2018-06-07 14:08 GMT+02:00 Egor Chyzhevskiy <egorkachic(a)gmail.com>: > I tried, but my vm didn't get ip address.. > > 2018-06-07 15:06 GMT+03:00 Petr Horacek <phoracek(a)redhat.com>: > >> Just skip the subnet step. Create the network, connect it to physnet and >> attach a VM. >> >> 2018-06-07 13:59 GMT+02:00 Egor Chyzhevskiy <egorkachic(a)gmail.com>: >> >>> Thank you for fast response. Ok, for example, i gave subnet to my ovn >>> network 172.20.139.108/30 and my vm get ip 172.20.139.110. After that i >>> tick connect to physical network ovirtmgmt(all vm's in this network has ip >>> 172.20.139.x). I don't have ping between vm 172.20.139.110(from ovn network >>> with subnet) and 172.20.139.x (from physical network ovirtmgmt). What shoul >>> i do to get communication between them? >>> >>> 2018-06-07 12:07 GMT+03:00 Petr Horacek <phoracek(a)redhat.com>: >>> >>>> You should not assign a subnet to external provider network connected >>>> to physical network. I think both physical and OVN DHCP servers will work, >>>> but I'm not sure which one has priority. >>>> >>>> If you have DHCP server running on your ovirtmgmt network, just create >>>> a network on external provider and connect it to the ovirtmgmt. Then VMs >>>> connected to this network should obtain IP from ovirtmgmt DHCP server and >>>> they should be able to ping one another or ovirtmgmt interface. >>>> >>>> Hope that makes it a bit more clear. >>>> >>>> 2018-06-07 9:45 GMT+02:00 Чижевский _ЕД <egorkachic(a)gmail.com>: >>>> >>>>> You are right, but one little thing, i think that ovn has his own dhcp >>>>> service.. Am i right? Could you please tell me some words, how does work >>>>> option when i tick connect to physical network? For example, can i ping >>>>> vm's from ovn network to ovirtmgmt, or how does it work? >>>>> >>>>> >>>>> >>>>> >>>> >>> >> >

2 1

write a PopupWidget for Web UI
by dhy336＠sina.com 07 Jun '18

07 Jun '18

Hi，I write a web UI in oVirt engine， write a EntityModelDateTimeBoxEditor in my PopupWidget. But my calendar not to select a day. I want to select. source is : 53 @UiField(provided = true) 54 @Path(value = "validDate.entity") 55 @WithElementId("validDate") 56 EntityModelDateTimeBoxEditor validDateEditor; 57 72 private void initEditors() { 73 ¦ log.info("====================initEditors==============="); //$NON-NLS-1$users 74 75 ¦ validDateEditor = new EntityModelDateTimeBoxEditor(); 76 ¦ validDateEditor.getContentWidget().setDateTimeFormat("yyyy-MM-dd"); //$NON-NLS-1$users 77 ¦ validDateEditor.getContentWidget().setValue(new Date()); 78 ¦ validDateEditor.getContentWidget().showDateOnly(); 79 ¦ validDateEditor.getContentWidget().setEnabled(true); 80 81 ¦} can you give me some advise?

1 0

Ovirt 4.2.1 Java SDK ~Payload above Size: [8931] throws HTTP 404
by atripathi＠hypergrid.com 07 Jun '18

07 Jun '18

Using Ovirt Java SDK for VM automation .. I have to use payload mechanism as I am trying to using same user_data for all VM customization (Centos, Ubuntu and Windows) As push user_data content of size 8931 (String length) is it throwing 400 final_message: "The system is finally up, after $UPTIME seconds"] Size: [8931] org.ovirt.engine.sdk4.Error: HTTP response code is "400". HTTP response message is "Bad Request". at org.ovirt.engine.sdk4.internal.services.ServiceImpl.throwError(ServiceImpl.java:113) at org.ovirt.engine.sdk4.internal.services.ServiceImpl.checkFault(ServiceImpl.java:40) at org.ovirt.engine.sdk4.internal.services.VmServiceImpl$UpdateRequestImpl.send(VmServiceImpl.java:1543) at org.ovirt.engine.sdk4.internal.services.VmServiceImpl$UpdateRequestImpl.send(VmServiceImpl.java:1464) Sample code -------------- List<org.ovirt.engine.sdk4.types.File> files = new ArrayList<org.ovirt.engine.sdk4.types.File>(); String metadata = cloudinit.cloudInitMetaFile(map, vmname, vm.id()); String userdata = cloudinit.cloudInitUserData( map, vmname, pkglist); logger.info("Cloud-Init Script - user data [{}] Size: [{}]", userdata, userdata.length()); files.add(file().name("openstack/latest/meta_data.json").content(metadata).build()); files.add(file().name("openstack/latest/user_data").content(userdata).build()); if (networkdatafile != null && !networkdatafile.isEmpty()) { files.add(file().name("openstack/latest/network_data.json").content(networkdatafile).build()); contentnetworkdatafile = cloudinit.cloudNetworkConfigMetaData(map, "eth0" ); files.add(file().name("openstack/content/network-config").content(contentnetworkdatafile).build()); files.add(file().name("openstack/content/network-config").content(contentnetworkdatafile).build()); } vmService.update().vm(vm().payloads(payload().type(VmDeviceType.CDROM).files(files))).send();

1 0

oVirt 4.1 ETL service sampling has encounterd an error
by Staniforth, Paul 07 Jun '18

07 Jun '18

Hello, our oVirt 4.1 system has had a DWH error since around 4am this morning, It comes up with the error ETL service sampling has encountered an error. Please consult the service log for more details in the ovirt-engine-dwh.log 2018-06-05 12:00:18|QXiOTi|gAp8Q4|Cz1F21|OVIRT_ENGINE_DWH|SampleRunJobs|Default|6|Java Exception|tRunJob_5|java.lang.RuntimeException:Child job running failed|1 Exception in component tRunJob_1 java.lang.RuntimeException: Child job running failed at ovirt_engine_dwh.sampletimekeepingjob_4_1.SampleTimeKeepingJob.tRunJob_1Process(SampleTimeKeepingJob.java:6067) at ovirt_engine_dwh.sampletimekeepingjob_4_1.SampleTimeKeepingJob.tJDBCInput_2Process(SampleTimeKeepingJob.java:5809) at ovirt_engine_dwh.sampletimekeepingjob_4_1.SampleTimeKeepingJob.tJDBCConnection_1Process(SampleTimeKeepingJob.java:4444) at ovirt_engine_dwh.sampletimekeepingjob_4_1.SampleTimeKeepingJob.tJDBCConnection_2Process(SampleTimeKeepingJob.java:4319) at ovirt_engine_dwh.sampletimekeepingjob_4_1.SampleTimeKeepingJob.tRowGenerator_2Process(SampleTimeKeepingJob.java:4188) at ovirt_engine_dwh.sampletimekeepingjob_4_1.SampleTimeKeepingJob.tJDBCInput_3Process(SampleTimeKeepingJob.java:3593) at ovirt_engine_dwh.sampletimekeepingjob_4_1.SampleTimeKeepingJob.tJDBCInput_5Process(SampleTimeKeepingJob.java:2977) at ovirt_engine_dwh.sampletimekeepingjob_4_1.SampleTimeKeepingJob.tJDBCInput_4Process(SampleTimeKeepingJob.java:2295) at ovirt_engine_dwh.sampletimekeepingjob_4_1.SampleTimeKeepingJob.tJDBCConnection_3Process(SampleTimeKeepingJob.java:1649) at ovirt_engine_dwh.sampletimekeepingjob_4_1.SampleTimeKeepingJob$2.run(SampleTimeKeepingJob.java:11363) and in the postgres log there is ERROR: integer out of range STATEMENT: INSERT INTO vm_interface_samples_history (history_datetime,vm_interface_id,receive_rate_percent,transmit_rate_percent,vm_interface_configuration_version,received_total_byte,transmitted_total_byte) VALUES ($1,$2,$3,$4,$5,$6,$7) ERROR: current transaction is aborted, commands ignored until end of transaction block Thanks, Paul S. To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html

2 5