February 2019 - Users - Ovirt List Archives

by SS00514758＠techmahindra.com

Hi All, I am unable to install oVirt on RHEL7.5, to install it I am taking reference of below link, https://www.ovirt.org/documentation/install-guide/chap-Installing_oVirt.html But though it is not working for me, couple of dependencies is not getting installed, and because of this I am not able to run the ovirt-engine, below are the depencies packages that unable to install, Error: Package: collectd-write_http-5.8.0-6.1.el7.x86_64 (@ovirt-4.2-centos-opstools) Requires: collectd(x86-64) = 5.8.0-6.1.el7 Removing: collectd-5.8.0-6.1.el7.x86_64 (@ovirt-4.2-centos-opstools) collectd(x86-64) = 5.8.0-6.1.el7 Updated By: collectd-5.8.1-1.el7.x86_64 (epel) collectd(x86-64) = 5.8.1-1.el7 Available: collectd-5.7.2-1.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.7.2-1.el7 Available: collectd-5.7.2-3.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.7.2-3.el7 Available: collectd-5.8.0-2.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.8.0-2.el7 Available: collectd-5.8.0-3.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.8.0-3.el7 Available: collectd-5.8.0-5.el7.x86_64 (ovirt-4.2-centos-opstools) collectd(x86-64) = 5.8.0-5.el7 Help me to install this. Looking forward to resolve this issue. Regards Sumit Sahay

1 year, 3 months

6
8
0 / 0

Re: Failed to synchronize networks of Provider ovirt-provider-ovn

by Mail SET Inc. Group

Yes, i use same manual to change WebUI SSL. ovirt-ca-file= is a same SSL file which use WebUI. Yes, i restart ovirt-provider-ovn, i restart engine, i restart all what i can restart. Nothing... > 12 сент. 2018 г., в 16:11, Dominik Holler <dholler(a)redhat.com> написал(а): > > On Wed, 12 Sep 2018 14:23:54 +0300 > "Mail SET Inc. Group" <mail(a)set-pro.net> wrote: > >> Ok! > > Not exactly, please use users(a)ovirt.org for such questions. > Other should benefit from this questions, too. > Please write the next mail to users(a)ovirt.org and keep me in CC. > >> What i did: >> >> 1) install oVirt «from box» (4.2.5.2-1.el7); >> 2) generate own ssl for my engine using my FreeIPA CA, Install it and > > What means "Install it"? You can use the doc from the following link > https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/... > > Ensure that ovirt-ca-file= in > /etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf > points to the correct file and ovirt-provider-ovn is restarted. > >> get tis issue; >> >> >> [root@engine ~]# tail -n 50 /var/log/ovirt-provider-ovn.log >> 2018-09-12 14:10:23,828 root [SSL: CERTIFICATE_VERIFY_FAILED] >> certificate verify failed (_ssl.c:579) Traceback (most recent call >> last): File "/usr/share/ovirt-provider-ovn/handlers/base_handler.py", >> line 133, in _handle_request method, path_parts, content >> File "/usr/share/ovirt-provider-ovn/handlers/selecting_handler.py", >> line 175, in handle_request return >> self.call_response_handler(handler, content, parameters) File >> "/usr/share/ovirt-provider-ovn/handlers/keystone.py", line 33, in >> call_response_handler return response_handler(content, parameters) >> File "/usr/share/ovirt-provider-ovn/handlers/keystone_responses.py", >> line 62, in post_tokens user_password=user_password) File >> "/usr/share/ovirt-provider-ovn/auth/plugin_facade.py", line 26, in >> create_token return auth.core.plugin.create_token(user_at_domain, >> user_password) File >> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/plugin.py", line >> 48, in create_token timeout=self._timeout()) File >> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 75, >> in create_token username, password, engine_url, ca_file, timeout) >> File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line >> 91, in _get_sso_token timeout=timeout File >> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 54, >> in wrapper response = func(*args, **kwargs) File >> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 47, >> in wrapper raise BadGateway(e) BadGateway: [SSL: >> CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:579) >> >> >> [root@engine ~]# tail -n 20 /var/log/ovirt-engine/engine.log >> 2018-09-12 14:10:23,773+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Lock >> Acquired to object >> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]', >> sharedLocks=''}' 2018-09-12 14:10:23,778+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] >> Running command: SyncNetworkProviderCommand internal: true. >> 2018-09-12 14:10:23,836+03 ERROR >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] >> Command >> 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' >> failed: EngineException: (Failed with error Bad Gateway and code >> 5050) 2018-09-12 14:10:23,837+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Lock >> freed to object >> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]', >> sharedLocks=''}' 2018-09-12 14:14:12,477+03 INFO >> [org.ovirt.engine.core.sso.utils.AuthenticationUtils] (default >> task-6) [] User admin@internal successfully logged in with scopes: >> ovirt-app-admin ovirt-app-api ovirt-app-portal >> ovirt-ext=auth:sequence-priority=~ ovirt-ext=revoke:revoke-all >> ovirt-ext=token-info:authz-search >> ovirt-ext=token-info:public-authz-search >> ovirt-ext=token-info:validate ovirt-ext=token:password-access >> 2018-09-12 14:14:12,587+03 INFO >> [org.ovirt.engine.core.bll.aaa.CreateUserSessionCommand] (default >> task-6) [1bf1b763] Running command: CreateUserSessionCommand >> internal: false. 2018-09-12 14:14:12,628+03 INFO >> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> (default task-6) [1bf1b763] EVENT_ID: USER_VDC_LOGIN(30), User >> admin@internal-authz connecting from '10.0.3.61' using session >> 's8jAm7BUJGlicthm6yZBA3CUM8QpRdtwFaK3M/IppfhB3fHFB9gmNf0cAlbl1xIhcJ2WX+ww7e71Ri+MxJSsIg==' >> logged in. 2018-09-12 14:14:30,972+03 INFO >> [org.ovirt.engine.core.bll.provider.ImportProviderCertificateCommand] >> (default task-6) [ee3cc8a7-4485-4fdf-a0c2-e9d67b5cfcd3] Running >> command: ImportProviderCertificateCommand internal: false. Entities >> affected : ID: aaa00000-0000-0000-0000-123456789aaa Type: >> SystemAction group CREATE_STORAGE_POOL with role type ADMIN >> 2018-09-12 14:14:30,982+03 INFO >> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> (default task-6) [ee3cc8a7-4485-4fdf-a0c2-e9d67b5cfcd3] EVENT_ID: >> PROVIDER_CERTIFICATE_IMPORTED(213), Certificate for provider >> ovirt-provider-ovn was imported. (User: admin@internal-authz) >> 2018-09-12 14:14:31,006+03 INFO >> [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] >> (default task-6) [a48d94ab-b0b2-42a2-a667-0525b4c652ea] Running >> command: TestProviderConnectivityCommand internal: false. Entities >> affected : ID: aaa00000-0000-0000-0000-123456789aaa Type: >> SystemAction group CREATE_STORAGE_POOL with role type ADMIN >> 2018-09-12 14:14:31,058+03 ERROR >> [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] >> (default task-6) [a48d94ab-b0b2-42a2-a667-0525b4c652ea] Command >> 'org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand' >> failed: EngineException: (Failed with error Bad Gateway and code >> 5050) 2018-09-12 14:15:10,954+03 INFO >> [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] >> (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread >> pool 'default' is using 0 threads out of 1, 5 threads waiting for >> tasks. 2018-09-12 14:15:10,954+03 INFO >> [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] >> (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread >> pool 'engine' is using 0 threads out of 500, 16 threads waiting for >> tasks and 0 tasks in queue. 2018-09-12 14:15:10,954+03 INFO >> [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] >> (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread >> pool 'engineScheduled' is using 0 threads out of 100, 100 threads >> waiting for tasks. 2018-09-12 14:15:10,954+03 INFO >> [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] >> (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread >> pool 'engineThreadMonitoring' is using 1 threads out of 1, 0 threads >> waiting for tasks. 2018-09-12 14:15:10,954+03 INFO >> [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] >> (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread >> pool 'hostUpdatesChecker' is using 0 threads out of 5, 2 threads >> waiting for tasks. 2018-09-12 14:15:23,843+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-61) [2455041f] Lock >> Acquired to object >> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]', >> sharedLocks=''}' 2018-09-12 14:15:23,849+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-61) [2455041f] >> Running command: SyncNetworkProviderCommand internal: true. >> 2018-09-12 14:15:23,900+03 ERROR >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-61) [2455041f] >> Command >> 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' >> failed: EngineException: (Failed with error Bad Gateway and code >> 5050) 2018-09-12 14:15:23,901+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-61) [2455041f] Lock >> freed to object >> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]', >> sharedLocks=''}' >> >> >> [root@engine ~]# >> cat /etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf # >> This file is automatically generated by engine-setup. Please do not >> edit manually [OVN REMOTE] ovn-remote=ssl:127.0.0.1:6641 >> [SSL] >> https-enabled=true >> ssl-cacert-file=/etc/pki/ovirt-engine/ca.pem >> ssl-cert-file=/etc/pki/ovirt-engine/certs/ovirt-provider-ovn.cer >> ssl-key-file=/etc/pki/ovirt-engine/keys/ovirt-provider-ovn.key.nopass >> [OVIRT] >> ovirt-sso-client-secret=Ms7Gw9qNT6IkXu7oA54tDmxaZDIukABV >> ovirt-host=https://engine.set.local:443 >> ovirt-sso-client-id=ovirt-provider-ovn >> ovirt-ca-file=/etc/pki/ovirt-engine/apache-ca.pem >> [PROVIDER] >> provider-host=engine.set.local >> >> >>> 12 сент. 2018 г., в 13:59, Dominik Holler <dholler(a)redhat.com> >>> написал(а): >>> >>> On Wed, 12 Sep 2018 13:04:53 +0300 >>> "Mail SET Inc. Group" <mail(a)set-pro.net> wrote: >>> >>>> Hello Dominik! >>>> I have a same issue with OVN provider and SSL >>>> https://www.mail-archive.com/users@ovirt.org/msg47020.html >>>> <https://www.mail-archive.com/users@ovirt.org/msg47020.html> But >>>> certificate changes not helps to resolve it. Maybe you can help me >>>> with this? >>> >>> Sure. Can you please share the relevant lines of >>> ovirt-provider-ovn.log and engine.log, and the information if you >>> are using the certificates generated by engine-setup with >>> users(a)ovirt.org ? Thanks, >>> Dominik >>> >> > >

1 year, 6 months

5
13
2 / 0

oVirt host deploy: disable multipath

by femi adegoke

https://bugzilla.redhat.com/show_bug.cgi?id=1472356 There are 2 drives in my install that oVirt is claiming as multipath. I have tried blacklisting at /etc/multipath/ but that hasn't worked. Any better solutions? I need these 2 drives to be non-multipathed.

2 years, 1 month

4
19
0 / 0

Out-of-sync networks can only be detached

by Sakhi Hadebe

Hi, I have a 3-node oVirt cluster. I have configured 2 logical networks: ovirtmgmt and public. Public logical network is attached in only 2 nodes and failing to attach on the 3rd node with the below error Invalid operation, out-of-sync network 'public' can only be detached. Please have been stuck on this for almost the whole day now. How do I fix this error? -- Regards, Sakhi Hadebe

2 years, 1 month

3
5
0 / 0

Network Address Change

by Paul.LKW

Hi All: I just has a case, I need to change the oVirt host and engine IP address due to data center decommission I checked in the hosted-engine host there are some files I could change ; in ovirt-hosted-engine/hosted-engine.conf ca_subject="O=simple.com, CN=1.2.3.4" gateway=1.2.3.254 and of course I need to change the ovirtmgmt interface IP too, I think just change the above line could do the tick, but where could I change the other host IP in the cluster ? I think I have to be lost all the host as once changed the hosted-engine host IP as it is in diff. sub net. Does there any command line tools could do that or someone has such experience could share? Best Regards, Paul.LKW

2 years, 3 months

4
6
0 / 0

looking for some ISV backup software which integrates the backup API

by Nathanaël Blanchet

Hello, We are about to change our backup provider, and I find it is a great chance to choose a full supported ovirt backup solution. I currently use this python script vm-backup-scheduler (https://github.com/wefixit-AT/oVirtBackup) but it is not the workflow officially suggested by the community (https://www.ovirt.org/develop/release-management/features/storage/backup-...). I've been looking for a long time an ISV who supports such an API, but the only one I found is this one : Acronis Backup Advanced suggested here https://access.redhat.com/ecosystem/search/#/ecosystem/Red%20Hat%20Enterp... I ran the trial version, but it doesn't seem to do better than the vm-backup-scheduler script, and it doesn't seem to use the backup API (attach a clone as a disk to an existing vm). Can you suggest me some other ISV solutions, if they ever exist... or share me your backup experience?

2 years, 10 months

5
4
0 / 0

OVS switch type for hosted-engine

by Devin A. Bougie

Is it possible to setup a hosted engine using the OVS switch type instead of Legacy? If it's not possible to start out as OVS, instructions for switching from Legacy to OVS after the fact would be greatly appreciated. Many thanks, Devin

2 years, 11 months

4
5
2 / 0

USB3 redirection

by Rik Theys

Hi, I'm trying to assign a USB3 controller to a CentOS 7.4 VM in oVirt 4.1 with USB redirection enabled. I've created the following file in /etc/ovirt-engine/osinfo.conf.d: 01-usb.properties with content os.other.devices.usb.controller.value = nec-xhci and have restarted ovirt-engine. If I disable USB-support in the web interface for the VM, the xhci controller is added to the VM (I can see it in the qemu-kvm commandline), but usb redirection is not available. If I enable USB-support in the UI, no xhci controller is added (only 4 uhci controllers). Is there a way to make the controllers for usb redirection xhci controllers? Regards, Rik -- Rik Theys System Engineer KU Leuven - Dept. Elektrotechniek (ESAT) Kasteelpark Arenberg 10 bus 2440 - B-3001 Leuven-Heverlee +32(0)16/32.11.07 ---------------------------------------------------------------- <<Any errors in spelling, tact or fact are transmission errors>>

3 years

3
5
0 / 0

OVN routing and firewalling in oVirt

by Gianluca Cecchi

Hello, how do we manage routing between different OVN networks in oVirt? And between OVN networks and physical ones? Based on architecture read here: http://openvswitch.org/support/dist-docs/ovn-architecture.7.html I see terms for logical routers and gateway routers respectively but how to apply to oVirt configuration? Do I have to choose between setting up a specialized VM or a physical one: is it applicable/advisable to put on oVirt host itself the gateway functionality? Is there any security policy (like security groups in Openstack) to implement? Thanks, Gianluca

3 years

4
6
1 / 0

Install hosted-engine - Task Get local VM IP failed

by florentl

Hi all, I try to install hosted-engine on node : ovirt-node-ng-4.2.3-0.20180518. Every times I get stuck on : [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:6c:5a:91 | awk '{ print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.108872", "end": "2018-06-01 11:17:34.421769", "rc": 0, "start": "2018-06-01 11:17:34.312897", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} I tried with static IP Address and with DHCP but both failed. To be more specific, I installed three nodes, deployed glusterfs with the wizard. I'm in a nested virtualization environment for this lab (Vmware Esxi Hypervisor). My node IP is : 192.168.176.40 / and I want the hosted-engine vm has 192.168.176.43. Thanks, Florent

3 years, 1 month

7
17
0 / 0

Lots of storage.MailBox.SpmMailMonitor

by Fabrice Bacchella

My vdsm log files are huge: -rw-r--r-- 1 vdsm kvm 1.8G Nov 22 11:32 vdsm.log And this is juste half an hour of logs: $ head -1 vdsm.log 2018-11-22 11:01:12,132+0100 ERROR (mailbox-spm) [storage.MailBox.SpmMailMonitor] mailbox 2 checksum failed, not clearing mailbox, clearing new mail (data='...lots of data', expected='\xa4\x06\x08\x00') (mailbox:612) I just upgraded vdsm: $ rpm -qi vdsm Name : vdsm Version : 4.20.43

3 years, 3 months

3
5
0 / 0

poweroff and reboot with ovirt_vm ansible module

by Nathanaël Blanchet

Hello, is there a way to poweroff or reboot (without stopped and running state) a vm with the ovirt_vm ansible module? -- Nathanaël Blanchet Supervision réseau Pôle Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

3 years, 11 months

7
11
0 / 0

OVN and change of mgmt network

by Gianluca Cecchi

Hello, I previously had OVN running on engine (as OVN provider with northd and northbound and southbound DBs) and hosts (with OVN controller). After changing mgmt ip of hosts (engine has retained instead the same ip), I executed again on them the command: vdsm-tool ovn-config <ip_of_engine> <nel_local_ip_of_host> Now I think I have to clean up some things, eg: 1) On engine where I get these lines below systemctl status ovn-northd.service -l . . . Sep 29 14:41:42 ovmgr1 ovsdb-server[940]: ovs|00005|reconnect|ERR|tcp: 10.4.167.40:37272: no response to inactivity probe after 5 seconds, disconnecting Oct 03 11:52:00 ovmgr1 ovsdb-server[940]: ovs|00006|reconnect|ERR|tcp: 10.4.167.41:52078: no response to inactivity probe after 5 seconds, disconnecting The two IPs are the old ones of two hosts It seems that a restart of the services has fixed... Can anyone confirm if I have to do anything else? 2) On hosts (there are 3 hosts with OVN on ip 10.4.192.32/33/34) where I currently have this output [root@ov301 ~]# ovs-vsctl show 3a38c5bb-0abf-493d-a2e6-345af8aedfe3 Bridge br-int fail_mode: secure Port "ovn-1dce5b-0" Interface "ovn-1dce5b-0" type: geneve options: {csum="true", key=flow, remote_ip="10.4.192.32"} Port "ovn-ddecf0-0" Interface "ovn-ddecf0-0" type: geneve options: {csum="true", key=flow, remote_ip="10.4.192.33"} Port "ovn-fd413b-0" Interface "ovn-fd413b-0" type: geneve options: {csum="true", key=flow, remote_ip="10.4.168.74"} Port br-int Interface br-int type: internal ovs_version: "2.7.2" [root@ov301 ~]# The IPs of kind 10.4.192.x are ok. But there is a left-over of an old host I initially used for tests, corresponding to 10.4.168.74, that now doesn't exist anymore How can I clean records for 1) and 2)? Thanks, Gianluca

4 years, 3 months

3
4
0 / 0

deprecating export domain?

by Charles Kozler

Hello, I recently read on this list from a redhat member that export domain is either being deprecated or looking at being deprecated To that end, can you share details? Can you share any notes/postings/bz's that document this? I would imagine something like this would be discussed in larger audience This seems like a somewhat significant change to make and I am curious where this is scheduled? Currently, a lot of my backups rely explicitly on an export domain for online snapshots, so I'd like to plan accordingly Thanks!

4 years, 7 months

11
21
3 / 0

How to connect to a guest with vGPU ?

by Josep Manel Andrés Moscardó

Hi, I got vGPU through mdev working but I am wondering how I would connect to the client and make use of the GPU. So far I try to access the console through SPICE and at some point in the boot process it switches to GPU and I cannot see anything else. Thanks. -- Josep Manel Andrés Moscardó Systems Engineer, IT Operations EMBL Heidelberg T +49 6221 387-8394

4 years, 11 months

3
4
0 / 0

Vm suddenly paused with error "vm has paused due to unknown storage error"

by Jasper Siero

Hi all, Since we upgraded our Ovirt nodes to CentOS 7 a vm (not a specific one but never more then one) will sometimes pause suddenly with the error "VM ... has paused due to unknown storage error". It happens now two times in a month. The Ovirt node uses san storage for the vm's running on it. When a specific vm is pausing with an error the other vm's keeps running without problems. The vm runs without problems after unpausing it. Versions: CentOS Linux release 7.1.1503 vdsm-4.14.17-0 libvirt-daemon-1.2.8-16 vdsm.log: VM Channels Listener::DEBUG::2015-10-25 07:43:54,382::vmChannels::95::vds::(_handle_timeouts) Timeout on fileno 78. libvirtEventLoop::INFO::2015-10-25 07:43:56,177::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother libvirtEventLoop::DEBUG::2015-10-25 07:43:56,178::vm::5204::vm.Vm::(_onLibvirtLifecycleEvent) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::event Suspended detail 2 opaque None libvirtEventLoop::INFO::2015-10-25 07:43:56,178::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother ........... libvirtEventLoop::INFO::2015-10-25 07:43:56,180::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother specific error part in libvirt vm log: block I/O error in device 'drive-virtio-disk0': Unknown error 32758 (32758) ........... block I/O error in device 'drive-virtio-disk0': Unknown error 32758 (32758) engine.log: 2015-10-25 07:44:48,945 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-40) [a43dcc8] VM diataal-prod-cas1 77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb moved from Up --> Paused 2015-10-25 07:44:49,003 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-40) [a43dcc8] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VM diataal-prod-cas1 has paused due to unknown storage error. Has anyone experienced the same problem or knows a way to solve this? Kind regards, Jasper

5 years, 2 months

3
3
0 / 0

Ovirt-engine-ha cannot to see live status of Hosted Engine

by asm＠pioner.kz

Good day for all. I have some issues with Ovirt 4.2.6. But now the main this of it: I have two Centos 7 Nodes with same config and last Ovirt 4.2.6 with Hostedengine with disk on NFS storage. Also some of virtual machines working good. But, when HostedEngine running on one node (srv02.local) everything is fine. After migrating to another node (srv00.local), i see that agent cannot to check livelinness of HostedEngine. After few minutes HostedEngine going to reboot and after some time i see some situation. After migration to another node (srv00.local) all looks OK. hosted-engine --vm-status commang when HosterEngine on srv00 node: --== Host 1 status ==-- conf_on_shared_storage : True Status up-to-date : True Hostname : srv02.local Host ID : 1 Engine status : {"reason": "vm not running on this host", "health": "bad", "vm": "down_unexpected", "detail": "unknown"} Score : 0 stopped : False Local maintenance : False crc32 : ecc7ad2d local_conf_timestamp : 78328 Host timestamp : 78328 Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=78328 (Tue Sep 18 12:44:18 2018) host-id=1 score=0 vm_conf_refresh_time=78328 (Tue Sep 18 12:44:18 2018) conf_on_shared_storage=True maintenance=False state=EngineUnexpectedlyDown stopped=False timeout=Fri Jan 2 03:49:58 1970 --== Host 2 status ==-- conf_on_shared_storage : True Status up-to-date : True Hostname : srv00.local Host ID : 2 Engine status : {"reason": "failed liveliness check", "health": "bad", "vm": "up", "detail": "Up"} Score : 3400 stopped : False Local maintenance : False crc32 : 1d62b106 local_conf_timestamp : 326288 Host timestamp : 326288 Extra metadata (valid at timestamp): metadata_parse_version=1 metadata_feature_version=1 timestamp=326288 (Tue Sep 18 12:44:21 2018) host-id=2 score=3400 vm_conf_refresh_time=326288 (Tue Sep 18 12:44:21 2018) conf_on_shared_storage=True maintenance=False state=EngineStarting stopped=False Log agent.log from srv00.local: MainThread::INFO::2018-09-18 12:40:51,749::states::779::ovirt_hosted_engine_ha.agent.hosted_engine.HostedE ngine::(consume) VM is powering up.. MainThread::INFO::2018-09-18 12:40:52,052::hosted_engine::491::ovirt_hosted_engine_ha.agent.hosted_engine. HostedEngine::(_monitoring_loop) Current state EngineStarting (score: 3400) MainThread::INFO::2018-09-18 12:41:01,066::states::779::ovirt_hosted_engine_ha.agent.hosted_engine.HostedE ngine::(consume) VM is powering up.. MainThread::INFO::2018-09-18 12:41:01,374::hosted_engine::491::ovirt_hosted_engine_ha.agent.hosted_engine. HostedEngine::(_monitoring_loop) Current state EngineStarting (score: 3400) MainThread::INFO::2018-09-18 12:41:11,393::state_machine::169::ovirt_hosted_engine_ha.agent.hosted_engine. HostedEngine::(refresh) Global metadata: {'maintenance': False} MainThread::INFO::2018-09-18 12:41:11,393::state_machine::174::ovirt_hosted_engine_ha.agent.hosted_engine. HostedEngine::(refresh) Host srv02.local.pioner.kz (id 1): {'conf_on_shared_storage': True, 'extra': 'meta data_parse_version=1\nmetadata_feature_version=1\ntimestamp=78128 (Tue Sep 18 12:40:58 2018)\nhost-id=1\ns core=0\nvm_conf_refresh_time=78128 (Tue Sep 18 12:40:58 2018)\nconf_on_shared_storage=True\nmaintenance=Fa lse\nstate=EngineUnexpectedlyDown\nstopped=False\ntimeout=Fri Jan 2 03:49:58 1970\n', 'hostname': 'srv02. local.pioner.kz', 'alive': True, 'host-id': 1, 'engine-status': {'reason': 'vm not running on this host', 'health': 'bad', 'vm': 'down_unexpected', 'detail': 'unknown'}, 'score': 0, 'stopped': False, 'maintenance ': False, 'crc32': 'e18e3f22', 'local_conf_timestamp': 78128, 'host-ts': 78128} MainThread::INFO::2018-09-18 12:41:11,393::state_machine::177::ovirt_hosted_engine_ha.agent.hosted_engine. HostedEngine::(refresh) Local (id 2): {'engine-health': {'reason': 'failed liveliness check', 'health': 'b ad', 'vm': 'up', 'detail': 'Up'}, 'bridge': True, 'mem-free': 12763.0, 'maintenance': False, 'cpu-load': 0 .0364, 'gateway': 1.0, 'storage-domain': True} MainThread::INFO::2018-09-18 12:41:11,393::states::779::ovirt_hosted_engine_ha.agent.hosted_engine.HostedE ngine::(consume) VM is powering up.. MainThread::INFO::2018-09-18 12:41:11,703::hosted_engine::491::ovirt_hosted_engine_ha.agent.hosted_engine. HostedEngine::(_monitoring_loop) Current state EngineStarting (score: 3400) MainThread::INFO::2018-09-18 12:41:21,716::states::779::ovirt_hosted_engine_ha.agent.hosted_engine.HostedE ngine::(consume) VM is powering up.. MainThread::INFO::2018-09-18 12:41:22,020::hosted_engine::491::ovirt_hosted_engine_ha.agent.hosted_engine. HostedEngine::(_monitoring_loop) Current state EngineStarting (score: 3400) MainThread::INFO::2018-09-18 12:41:31,033::states::779::ovirt_hosted_engine_ha.agent.hosted_engine.HostedE ngine::(consume) VM is powering up.. MainThread::INFO::2018-09-18 12:41:31,344::hosted_engine::491::ovirt_hosted_engine_ha.agent.hosted_engine. HostedEngine::(_monitoring_loop) Current state EngineStarting (score: 3400) As we can see, agent thinking that HostedEngine just in powering up mode. I cannot to do anythink with it. I allready reinstalled many times srv00 node without success. One time i even has to uninstall ovirt* and vdsm* software. Also here one interesting point, after installing just "yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release42.rpm" on this node i try to install this node from engine web interface with "Deploy" action. But, installation was unsuccesfull, before i didnt install ovirt-hosted-engine-ha on this node. I dont see in documentation that its need bofore installation of new hosts. But this is for information and checking. After installing ovirt-hosted-engine-ha node was installed with HostedEngine support. But the main issue not changed. Thanks in advance for help. BR, Alexandr

5 years, 2 months

3
5
0 / 0

Hyperconverged setup - storage architecture - scaling

by Leo David

Hello Everyone, Reading through the document: "Red Hat Hyperconverged Infrastructure for Virtualization 1.5 Automating RHHI for Virtualization deployment" Regarding storage scaling, i see the following statements: *2.7. SCALINGRed Hat Hyperconverged Infrastructure for Virtualization is supported for one node, and for clusters of 3, 6, 9, and 12 nodes.The initial deployment is either 1 or 3 nodes.There are two supported methods of horizontally scaling Red Hat Hyperconverged Infrastructure for Virtualization:* *1 Add new hyperconverged nodes to the cluster, in sets of three, up to the maximum of 12 hyperconverged nodes.* *2 Create new Gluster volumes using new disks on existing hyperconverged nodes.You cannot create a volume that spans more than 3 nodes, or expand an existing volume so that it spans across more than 3 nodes at a time* *2.9.1. Prerequisites for geo-replicationBe aware of the following requirements and limitations when configuring geo-replication:One geo-replicated volume onlyRed Hat Hyperconverged Infrastructure for Virtualization (RHHI for Virtualization) supports only one geo-replicated volume. Red Hat recommends backing up the volume that stores the data of your virtual machines, as this is usually contains the most valuable data.* ------ Also in oVirtEngine UI, when I add a brick to an existing volume i get the following warning: *"Expanding gluster volume in a hyper-converged setup is not recommended as it could lead to degraded performance. To expand storage for cluster, it is advised to add additional gluster volumes." * Those things are raising a couple of questions that maybe for some for you guys are easy to answer, but for me it creates a bit of confusion... I am also referring to RedHat product documentation, because I treat oVirt as production-ready as RHHI is. *1*. Is there any reason for not going to distributed-replicated volumes ( ie: spread one volume across 6,9, or 12 nodes ) ? - ie: is recomanded that in a 9 nodes scenario I should have 3 separated volumes, but how should I deal with the folowing question *2.* If only one geo-replicated volume can be configured, how should I deal with 2nd and 3rd volume replication for disaster recovery *3.* If the limit of hosts per datacenter is 250, then (in theory ) the recomended way in reaching this treshold would be to create 20 separated oVirt logical clusters with 12 nodes per each ( and datacenter managed from one ha-engine ) ? *4.* In present, I have the folowing one 9 nodes cluster , all hosts contributing with 2 disks each to a single replica 3 distributed replicated volume. They where added to the volume in the following order: node1 - disk1 node2 - disk1 ...... node9 - disk1 node1 - disk2 node2 - disk2 ...... node9 - disk2 At the moment, the volume is arbitrated, but I intend to go for full distributed replica 3. Is this a bad setup ? Why ? It oviously brakes the redhat recommended rules... Is there anyone so kind to discuss on these things ? Thank you very much ! Leo -- Best regards, Leo David -- Best regards, Leo David

5 years, 3 months

3
5
0 / 0

disk locked after export as OVA

by adam_xu＠adagene.com.cn

Hello, everyone. I tried to export a vm as OVA. I got a error in webui: VDSM ovirt1.ntbaobei.com command HSMGetAllTasksStatusesVDS failed: Volume Group not big enough: (u'Not enough free extents for extending LV d9f2378f-92f0-4bc1-96a8-20a0f2c575cb/c515a3f9-0590-4ebe-81c5-9d0993f1fec9 (free=848, needed=872)',) seems no enough space in the storage domain. I deleted the vm which i wanted to export as OVA before, but I saw a disk with id 8140d2e7-6908-438e-a646-23e58a33913e left in the storage and the status is locked. here's some log in the engine.log: 2018-09-17 14:27:03,467+08 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.CopyImageVDSCommand] (EE-ManagedThreadFactory-engine-Thread-107849) [a407f6a9-445d-4ccc-b998-f9dfc6dc67ec] START, CopyImageVDSCommand( CopyImageVDSCommandParameters:{storagePoolId='79432500-ad45-11e8-98f3-00163e188641', ignoreFailoverLimit='false', storageDomainId='d9f2378f-92f0-4bc1-96a8-20a0f2c575cb', imageGroupId='ee55bbe7-8001-4c82-b1a6-0cac7710704b', imageId='701a7472-8c00-4b9f-aa87-4837eb128695', dstImageGroupId='8140d2e7-6908-438e-a646-23e58a33913e', vmId='b3aa623e-3072-430e-87d6-b81a3b07f466', dstImageId='c515a3f9-0590-4ebe-81c5-9d0993f1fec9', imageDescription='', dstStorageDomainId='d9f2378f-92f0-4bc1-96a8-20a0f2c575cb', copyVolumeType='LeafVol', volumeFormat='COW', preallocate='Sparse', postZero='false', discard='false', force='true'}), log id: 164e3046 2018-09-17 14:27:03,467+08 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.CopyImageVDSCommand] (EE-ManagedThreadFactory-engine-Thread-107849) [a407f6a9-445d-4ccc-b998-f9dfc6dc67ec] ++ dstImageGUID=8140d2e7-6908-438e-a646-23e58a33913e I think maybe some command did not been excuted after I export the vm as OVA. I can find the similar case here: https://access.redhat.com/solutions/1298893 I have used the tool unlock_entity.sh but cannot find any disk that is locked. So what should I do to delete the disk that is been locked? yours Adam

5 years, 6 months

2
1
0 / 0

Re: Cannot Increase Hosted Engine VM Memory

by Douglas Duckworth

Yes, I do. Gold crown indeed. It's the "HostedEngine" as seen attached! Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Wed, Jan 23, 2019 at 12:02 PM Simone Tiraboschi <stirabos(a)redhat.com<mailto:stirabos@redhat.com>> wrote: On Wed, Jan 23, 2019 at 5:51 PM Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: Hi Simone Can I get help with this issue? Still cannot increase memory for Hosted Engine. From the logs it seams that the engine is trying to hotplug memory to the engine VM which is something it should not happen. The engine should simply update engine VM configuration in the OVF_STORE and require a reboot of the engine VM. Quick question, in the VM panel do you see a gold crown symbol on the Engine VM? Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Thu, Jan 17, 2019 at 8:08 AM Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: Sure, they're attached. In "first attempt" the error seems to be: 2019-01-17 07:49:24,795-05 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-29) [680f82b3-7612-4d91-afdc-43937aa298a2] EVENT_ID: FAILED_HOT_SET_MEMORY_NOT_DIVIDABLE(2,048), Failed to hot plug memory to VM HostedEngine. Amount of added memory (4000MiB) is not dividable by 256MiB. Followed by: 2019-01-17 07:49:24,814-05 WARN [org.ovirt.engine.core.bll.UpdateRngDeviceCommand] (default task-29) [26f5f3ed] Validation of action 'UpdateRngDevice' failed for user admin@internal-authz. Reasons: ACTION_TYPE_FAILED_VM_IS_RUNNING 2019-01-17 07:49:24,815-05 ERROR [org.ovirt.engine.core.bll.UpdateVmCommand] (default task-29) [26f5f3ed] Updating RNG device of VM HostedEngine (adf14389-1563-4b1a-9af6-4b40370a825b) failed. Old RNG device = VmRngDevice:{id='VmDeviceId:{deviceId='6435b2b5-163c-4f0c-934e-7994da60dc89', vmId='adf14389-1563-4b1a-9af6-4b40370a825b'}', device='virtio', type='RNG', specParams='[source=urandom]', address='', managed='true', plugged='true', readOnly='false', deviceAlias='', customProperties='null', snapshotId='null', logicalName='null', hostDevice='null'}. New RNG device = VmRngDevice:{id='VmDeviceId:{deviceId='6435b2b5-163c-4f0c-934e-7994da60dc89', vmId='adf14389-1563-4b1a-9af6-4b40370a825b'}', device='virtio', type='RNG', specParams='[source=urandom]', address='', managed='true', plugged='true', readOnly='false', deviceAlias='', customProperties='null', snapshotId='null', logicalName='null', hostDevice='null'}. In "second attempt" I used values that are dividable by 256 MiB so that's no longer present. Though same error: 2019-01-17 07:56:59,795-05 INFO [org.ovirt.engine.core.vdsbroker.SetAmountOfMemoryVDSCommand] (default task-22) [7059a48f] START, SetAmountOfMemoryVDSCommand(HostName = ovirt-hv1.med.cornell.edu<http://ovirt-hv1.med.cornell.edu>, Params:{hostId='cdd5ffda-95c7-4ffa-ae40-be66f1d15c30', vmId='adf14389-1563-4b1a-9af6-4b40370a825b', memoryDevice='VmDevice:{id='VmDeviceId:{deviceId='7f7d97cc-c273-4033-af53-bc9033ea3abe', vmId='adf14389-1563-4b1a-9af6-4b40370a825b'}', device='memory', type='MEMORY', specParams='[node=0, size=2048]', address='', managed='true', plugged='true', readOnly='false', deviceAlias='', customProperties='null', snapshotId='null', logicalName='null', hostDevice='null'}', minAllocatedMem='6144'}), log id: 50873daa 2019-01-17 07:56:59,855-05 INFO [org.ovirt.engine.core.vdsbroker.SetAmountOfMemoryVDSCommand] (default task-22) [7059a48f] FINISH, SetAmountOfMemoryVDSCommand, log id: 50873daa 2019-01-17 07:56:59,862-05 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-22) [7059a48f] EVENT_ID: HOT_SET_MEMORY(2,039), Hotset memory: changed the amount of memory on VM HostedEngine from 4096 to 4096 2019-01-17 07:56:59,881-05 WARN [org.ovirt.engine.core.bll.UpdateRngDeviceCommand] (default task-22) [28fd4c82] Validation of action 'UpdateRngDevice' failed for user admin@internal-authz. Reasons: ACTION_TYPE_FAILED_VM_IS_RUNNING 2019-01-17 07:56:59,882-05 ERROR [org.ovirt.engine.core.bll.UpdateVmCommand] (default task-22) [28fd4c82] Updating RNG device of VM HostedEngine (adf14389-1563-4b1a-9af6-4b40370a825b) failed. Old RNG device = VmRngDevice:{id='VmDeviceId:{deviceId='6435b2b5-163c-4f0c-934e-7994da60dc89', vmId='adf14389-1563-4b1a-9af6-4b40370a825b'}', device='virtio', type='RNG', specParams='[source=urandom]', address='', managed='true', plugged='true', readOnly='false', deviceAlias='', customProperties='null', snapshotId='null', logicalName='null', hostDevice='null'}. New RNG device = VmRngDevice:{id='VmDeviceId:{deviceId='6435b2b5-163c-4f0c-934e-7994da60dc89', vmId='adf14389-1563-4b1a-9af6-4b40370a825b'}', device='virtio', type='RNG', specParams='[source=urandom]', address='', managed='true', plugged='true', readOnly='false', deviceAlias='', customProperties='null', snapshotId='null', logicalName='null', hostDevice='null'}. This message repeats throughout engine.log: 2019-01-17 07:55:43,270-05 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-89) [] EVENT_ID: VM_MEMORY_UNDER_GUARANTEED_VALUE(148), VM HostedEngine on host ovirt-hv1.med.cornell.edu<http://ovirt-hv1.med.cornell.edu> was guaranteed 8192 MB but currently has 4224 MB As you can see attached the host has plenty of memory. Thank you Simone! Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Thu, Jan 17, 2019 at 5:09 AM Simone Tiraboschi <stirabos(a)redhat.com<mailto:stirabos@redhat.com>> wrote: On Wed, Jan 16, 2019 at 8:22 PM Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: Sorry for accidental send. Anyway I try to increase physical memory however it won't go above 4096MB. The hypervisor has 64GB. Do I need to modify this value with Hosted Engine offline? No, it's not required. Can you please attach your engine.log for the relevant time frame? Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Wed, Jan 16, 2019 at 1:58 PM Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: Hello I am trying to increase Hosted Engine physical memory above 4GB Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 _______________________________________________ Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave(a)ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_site_p...> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_commun...> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGSXQVVPJJ2...<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.ovirt.org_arch...>

5 years, 7 months

3
8
0 / 0

Agentless backup solutions

by femi adegoke

What backup solutions are people using? I'm only interested in host-level backups (no agents in the vm's) I am aware of the following products: https://storware.eu/en/storware-vprotect/ https://github.com/zipurman/oVIRT_Simple_Backup https://www.sepusa.com/ Any others?

5 years, 8 months

9
16
1 / 0

Use public-signed SSL certs?

by Chris Adams

I installed an SSL cert from a public CA (Let's Encrypt) on my engine, following this: https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/... That gets the regular web UI working, but I can't upload an ISO. I assume that I need to do something with the imageio-proxy service on the engine, but not sure what... I tried replacing imageio-proxy.cer and imageio-proxy.key.nopass, but that didn't work. I'm trying to avoid ever needing to install a special CA cert in browsers. -- Chris Adams <cma(a)cmadams.net>

5 years, 8 months

6
19
0 / 0

reinstallation information

by nikkognt＠gmail.com

Hi, after a blackout one host of my ovirt not working properly. I tried to Reinstall it but ends with the following error "Failed to install Host ov1. Failed to execute stage 'Closing up': Failed to start service 'vdsmd'." I tried to start manually but it not start . Now, I would like to reinstall from iso ovirt node. After I put the host is in maintenance must I remove host from the cluster (Hosts -> host1 -> Remove) or I can reinstall without remove it? If I remore it from the cluster the network configurations I lose them or not? My ovirt version is oVirt Engine Version: 4.1.9.1-1.el7.centos.

5 years, 9 months

2
6
0 / 0

Spice console very poor performance for Windows 10 vm

by Leo David

Hello Everyone, Maybe I am something wrong, but spice console seem to be very laggy and slow for windows 10 vms. I have tried both qxl and qxl-dod drivers, but no luck so far... As a notice, the Win 2012R2 vm console is running fine, the problem seems to only affect Windows 10. Any ideas, what should I do to sort this out ? Thank you very much ! Leo -- Best regards, Leo David

5 years, 9 months

6
22
0 / 0

Unable to find OVF_STORE after recovery / upgrade

by Sam Cappello

This is a multi-part message in MIME format. --------------05F3D0780062C6D37C1619A7 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Hi, so i was running a 3.4 hosted engine two node setup on centos 6, had some disk issues so i tried to upgrade to centos 7 and follow the path 3.4 > 3.5 > 3.6 > 4.0. i screwed up dig time somewhere between 3.6 and 4.0, so i wiped the drives, installed a fresh 4.0.3, then created the database and restored the 3.6 engine backup before running engine-setup as per the docs. things seemed to work, but i have the the following issues / symptoms: - ovirt-ha-agent running 100% CPU on both nodes - messages in the UI that the Hosted Engine storage Domain isn't active and Failed to import the Hosted Engine Storage Domain - hosted engine is not visible in the UI and the following repeating in the agent.log: MainThread::INFO::2016-10-03 12:38:27,718::hosted_engine::461::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Current state EngineUp (score: 3400) MainThread::INFO::2016-10-03 12:38:27,720::hosted_engine::466::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Best remote host vmhost1.oracool.net (id: 1, score: 3400) MainThread::INFO::2016-10-03 12:38:37,979::states::421::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume) Engine vm running on localhost MainThread::INFO::2016-10-03 12:38:37,985::hosted_engine::612::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Initializing VDSM MainThread::INFO::2016-10-03 12:38:45,645::hosted_engine::639::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Connecting the storage MainThread::INFO::2016-10-03 12:38:45,647::storage_server::219::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2016-10-03 12:39:00,543::storage_server::226::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2016-10-03 12:39:00,562::storage_server::233::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Refreshing the storage domain MainThread::INFO::2016-10-03 12:39:01,235::hosted_engine::666::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Preparing images MainThread::INFO::2016-10-03 12:39:01,236::image::126::ovirt_hosted_engine_ha.lib.image.Image::(prepare_images) Preparing images MainThread::INFO::2016-10-03 12:39:09,295::hosted_engine::669::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Reloading vm.conf from the shared storage domain MainThread::INFO::2016-10-03 12:39:09,296::config::206::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Trying to get a fresher copy of vm configuration from the OVF_STORE MainThread::WARNING::2016-10-03 12:39:16,928::ovf_store::107::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan) Unable to find OVF_STORE MainThread::ERROR::2016-10-03 12:39:16,934::config::235::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Unable to get vm.conf from OVF_STORE, falling back to initial vm.conf I have searched a bit and not really found a solution, and have come to the conclusion that i have made a mess of things, and am wondering if the best solution is to export the VMs, and reinstall everything then import them back? i am using remote NFS storage. if i try and add the hosted engine storage domain it says it is already registered. i have also upgraded and am now running oVirt Engine Version: 4.0.4.4-1.el7.centos hosts were installed using ovirt-node. currently at 3.10.0-327.28.3.el7.x86_64 if a fresh install is best, any advice / pointer to doc that explains best way to do this? i have not moved my most important server over to this cluster yet so i can take some downtime to reinstall. thanks! sam --------------05F3D0780062C6D37C1619A7 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hi,<br> so i was running a 3.4 hosted engine two node setup on centos 6, had some disk issues so i tried to upgrade to centos 7 and follow the path 3.4 > 3.5 > 3.6 > 4.0. i screwed up dig time somewhere between 3.6 and 4.0, so i wiped the drives, installed a fresh 4.0.3, then created the database and restored the 3.6 engine backup before running engine-setup as per the docs. things seemed to work, but i have the the following issues / symptoms:<br> - ovirt-ha-agent running 100% CPU on both nodes<br> - messages in the UI that the Hosted Engine storage Domain isn't active and Failed to import the Hosted Engine Storage Domain<br> - hosted engine is not visible in the UI<br> and the following repeating in the agent.log:<br> <br> MainThread::INFO::2016-10-03 12:38:27,718::hosted_engine::461::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Current state EngineUp (score: 3400)<br> MainThread::INFO::2016-10-03 12:38:27,720::hosted_engine::466::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Best remote host vmhost1.oracool.net (id: 1, score: 3400)<br> MainThread::INFO::2016-10-03 12:38:37,979::states::421::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume) Engine vm running on localhost<br> MainThread::INFO::2016-10-03 12:38:37,985::hosted_engine::612::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Initializing VDSM<br> MainThread::INFO::2016-10-03 12:38:45,645::hosted_engine::639::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Connecting the storage<br> MainThread::INFO::2016-10-03 12:38:45,647::storage_server::219::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server<br> MainThread::INFO::2016-10-03 12:39:00,543::storage_server::226::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server<br> MainThread::INFO::2016-10-03 12:39:00,562::storage_server::233::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Refreshing the storage domain<br> MainThread::INFO::2016-10-03 12:39:01,235::hosted_engine::666::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Preparing images<br> MainThread::INFO::2016-10-03 12:39:01,236::image::126::ovirt_hosted_engine_ha.lib.image.Image::(prepare_images) Preparing images<br> MainThread::INFO::2016-10-03 12:39:09,295::hosted_engine::669::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Reloading vm.conf from the shared storage domain<br> MainThread::INFO::2016-10-03 12:39:09,296::config::206::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Trying to get a fresher copy of vm configuration from the OVF_STORE<br> MainThread::WARNING::2016-10-03 12:39:16,928::ovf_store::107::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan) Unable to find OVF_STORE<br> MainThread::ERROR::2016-10-03 12:39:16,934::config::235::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Unable to get vm.conf from OVF_STORE, falling back to initial vm.conf<br> <br> I have searched a bit and not really found a solution, and have come to the conclusion that i have made a mess of things, and am wondering if the best solution is to export the VMs, and reinstall everything then import them back?<br> i am using remote NFS storage.<br> if i try and add the hosted engine storage domain it says it is already registered.<br> i have also upgraded and am now running <span class="gwt-InlineLabel">oVirt Engine Version: 4.0.4.4-1.el7.centos<br> hosts were installed using ovirt-node. currently at 3.10.0-327.28.3.el7.x86_64<br> if a fresh install is best, any advice / pointer to doc that explains best way to do this?<br> i have not moved my most important server over to this cluster yet so i can take some downtime to reinstall.<br> thanks!<br> sam<br> <br> </span><br> </body> </html> --------------05F3D0780062C6D37C1619A7--

5 years, 11 months

3
2
0 / 0

Supporting comments on ovirt-site Blog section

by Roy Golan

It would be very useful to have a comment section on our ovirt site. It is quite standard to have that on every blog out there, and for a reason - you get feedback and conversation around the topic, without going somewhere else (users list, irc, etc...) What do we need to do to help the middle man with that? Regards, Roy

5 years, 11 months

4
3
0 / 0

Any plans for oVirt and SBD fencing (a.k.a. poison pill)

by hunter86_bg＠yahoo.com

Hello Community, Do you have any idea if SBD fencing mechanism will be implemented in the nearest future? It will be nice to be able to resset a host just like corosync/pacemaker cluster implementation.

5 years, 11 months

4
3
0 / 0

[Users] Problem Creating "oVirtEngine" Machine

by Richie＠HIP

--Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=windows-1252 I can't agree with you more. Modifying every box's or Virtual Machine's = HOSTS file with a FQDN and IP SHOULD work, but in my case it is not. = There are several reasons I've come to believe could be the problem = during my trial-and-errors testing and learning. FIRST - MACHINE IPs. THe machine's "Names" where not appearing in the Microsoft Active = Directory DHCP along with their assigned IPs; in other words, the DHCP = just showed an "Assigned IP", equal to the Linux Machine's IP, with a = <empty> ('i.e. blank, none, silch, plan old "no-letters-or-numbers") = "Name" in the "Name" (i.e. machines "network name", or FQDN-value used = by the Windows AD DNS-service) column. =20 if your IP is is appearing with an <empty> "name", there is no "host = name" to associate the IP, it makes it difficult to define a FQDN; which = isn't that useful if we're going to use the HOSTS files in all = participating machines in an oVirt Installation. I kept banging my head for three (3) long hours trying to find the = problem. In Fedora 18, I could't find where the "network name" of the machine = could be defined. =20 I tried putting the "Additional Search Domains" and/or "DHCP Client ID" = in Fedora's 18 Desktop - under "System Settings > Hardware > Network > = Options > IPv4 Setting" The DHCP went crazy; showing an "Aberrant-MAC-Address" (i.e. a really = long-sting value where the machine's MAC address should be), and we knew = the MAC address as we obtained using "ifconfig" on the machine getting = it's IP from the DHCP. So we reverted these entries from the = aforementioned, rebooted, and got an assigned IP, with proper MAC = address, but still no "Name" Kept wondering around the "Settings" and seeing which one made sense, = but what the heck, I went for it. =20 Under "System Settings > System > Details" I found the information about = GNOME and the machine's hardware. =20 There was a field for "Device Name" that originally had = "localhost.localdomain"; I changed the value to "ovirtmanager". and = under "Graphic" changed to "Forced Fallback Mode" to "ON". =20 I also installed all Kerberos libraries and client (i.e. authconfig-gtk, = authhub, authhub-client, krb5-apple-clents, krb5-auth-dialog, = krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) and rebooted VOILA=85!!! =20 I don;t know if it was the definition of "Device Name" from = "localhost.localdomain" to "ovirtengine", of the Kerberos libraries = install, or both. But finally the MS AD DHCP was showing the = Addigned-IP, the machine "Name" and the proper MAC-address. Regardless, = setting the machine's "Network Name" under "System Settings > System > = Details > Device Name", with no explanation of what "Device Name" meant = or was used for, was the last place I would have imagined this network = setting could be defined. NOTE - Somebody has to try the two steps I did together, separately. to = see which one is the real problem-solver; for me it is working, and "if = it ain't broke, don't fix it=85" Now that I have the DHCP / IP thing sorted, I have to do the DNS stuff. To this point, I've addressed the DHCP and "Network Name" of the = IP-Lease (required for the DNS to work). This still does't completely = explain why, by modifying the HOSTS file (allowing be to set and IP and = non-DNS FQDN). allows me to install the oVirtEngine "as long as I do not = use default HTTPd service parameters as suggested by the install". By = using the HOST file to "define" FQDNs, AND NOT using the default HTTPd = suggested changes, I'm able to install the oVirtEngine (given that I use = ports 8700 and 8701) to access the "oVirtEngine Welcome Screen", BUT = NONE of the "oVirt Portals" work=85 YET=85!!! More to come during the week Richie Jos=E9 E ("Richie") Piovanetti, MD, MS=20 M: 787-615-4884 | richiepiovanetti(a)healthcareinfopartners.com On Aug 2, 2013, at 3:10 AM, Joop <jvdwege(a)xs4all.nl> wrote: > Hello Ritchie, >=20 >> In a conversation via IRC, someone suggested that I activate = "dnsmask" to overcome what appears to be a DNS problem. I'll try that = other possibility once I get home later today. >>=20 >> In the mean time, what do you mean by "fixing the hostname"=85? I = opened and fixed the HOSTNAMES and changed it from = "localhost-localdomain" to "localhost.localdomain" and that made no = difference. Albeit, after changing I didm;t restart, remove ovirtEngine = ((using "engine-cleanup") and reinstalled via "engine-setup". Is that = what you mean=85? >>=20 >>=20 >>=20 >> In the mean time, the fact that even if I resolve the issue of = oVirtEngine I will not be able to connect to the oVirt Nodes unless I = have DNS resolution, apparently means I should do something with = resolving via DNS in my home LAN (i.e implement some sort of "DNS Cache" = so I can resolve my home computers via DNS inside my LAN). >>=20 >> Any suggestions are MORE THAN WELCOME=85!!! >> =20 >=20 > Having setup ovirt more than I can count right now I share your = feeling that it isn't always clear why things are going wrong, but in = this case I suspect that there is a rather small thing missing. > In short if you setup ovirt-engine, either using virtualbox or on real = hardware, and you give your host a meaningfull name AND you add that = info also in your /etc/hosts file than things SHOULD work, no need for = dnsmasq or even bind. Would make things easier once you start adding = virt hosts to you infrastructure since you will need to duplicate these = actions on each host (add engine name/ip to each host and add each host = to the others and all hosts to engine) >=20 > Just ask if you need more assistance and I will write down a small = howto that should work out of the box else I might have some time to see = if I can get things going. >=20 > Regards, >=20 > Joop >=20 --Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=windows-1252 <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html = charset=3Dwindows-1252"></head><body style=3D"word-wrap: break-word; = -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">I = can't agree with you more.  Modifying every box's or Virtual = Machine's HOSTS file with a FQDN and IP SHOULD work, but in my case it = is not.  There are several reasons I've come to believe could be = the problem during my trial-and-errors testing and = learning.<div><div><br></div><div>FIRST - MACHINE IPs.</div><ul = class=3D"MailOutline"><li>THe machine's "Names" where not appearing in = the <b>Microsoft Active Directory DHCP</b> along with their assigned = IPs; in other words, the DHCP just showed an "Assigned IP", equal to the = Linux Machine's IP, with a <empty> ('i.e. blank, none, silch, plan = old "no-letters-or-numbers") "Name" in the "Name" (i.e. machines = "network name", or FQDN-value used by the Windows AD DNS-service) = column.  </li><li>if your IP is is appearing with an <empty> = "name", there is no "host name" to associate the IP, it makes it = difficult to define a FQDN; which isn't that useful if we're going to = use the HOSTS files in all participating machines in an oVirt = Installation.</li><li>I kept banging my head for three (3) long hours = trying to find the problem.</li><ul><li>In Fedora 18, I could't find = where the "network name" of the machine could be defined. =  </li><li>I tried putting the "Additional Search Domains" and/or = "DHCP Client ID" in Fedora's 18 Desktop - under "System Settings > = Hardware > Network > Options > IPv4 Setting"</li><ul><li>The = DHCP went crazy;  showing an "Aberrant-MAC-Address" (i.e. a really = long-sting value where the machine's MAC address should be), and we knew = the MAC address as we obtained using "ifconfig" on the machine getting = it's IP from the DHCP.  So we reverted these entries from the = aforementioned, rebooted, and got an assigned IP, with proper MAC = address, but still no "Name"</li></ul><li>Kept wondering around the = "Settings" and seeing which one made sense, but what the heck, I went = for it.  </li><ul><li>Under "System Settings > System > = Details" I found the information about GNOME and the machine's hardware. =  </li><li>There was a field for "Device Name" that originally had = "localhost.localdomain"; I changed the value to "ovirtmanager". and = under "Graphic" changed to "Forced Fallback Mode" to "ON". =  </li><li>I also installed all Kerberos libraries and client (i.e. = authconfig-gtk, authhub, authhub-client, krb5-apple-clents, = krb5-auth-dialog, krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) = and rebooted</li><li>VOILA=85!!!  </li></ul><li>I don;t know if it = was the definition of "Device Name" from "localhost.localdomain" to = "ovirtengine", of the Kerberos libraries install, or both.  But = finally the MS AD DHCP was showing the Addigned-IP, the machine "Name" = and the proper MAC-address.  Regardless, setting the machine's = "Network Name" under "System Settings > System > Details = > Device Name", with no explanation of what "Device Name" meant = or was used for, was the last place I would have imagined this = network setting could be defined.</li><li><b>NOTE</b> - Somebody has to = try the two steps I did together, separately. to see which one is the = real problem-solver; for me it is working, and "if it ain't broke, don't = fix it=85"</li></ul></ul><div><br = class=3D"webkit-block-placeholder"></div><div>Now that I have the DHCP / = IP thing sorted, I have to do the DNS stuff.</div><div><br></div><div>To = this point, I've addressed the DHCP and "Network Name" of the IP-Lease = (required for the DNS to work).  This still does't completely = explain why, by modifying the HOSTS file (allowing be to set and IP and = non-DNS FQDN). allows me to install the oVirtEngine "<b><i>as long as I = do not use default  HTTPd service parameters as suggested by the = install</i></b>".  <b>By using the HOST file to "define" FQDNs, AND = NOT using the default HTTPd suggested changes, I'm able to install the = oVirtEngine (given that I use ports 8700 and 8701) to access the = "oVirtEngine Welcome Screen", BUT NONE of the "oVirt Portals" work</b>=85 = YET=85!!!</div><div><br></div><div>More to come during the = week</div><div><br></div><div>Richie</div><div = apple-content-edited=3D"true"><br>Jos=E9 E ("Richie") Piovanetti, MD, = MS <br>M: 787-615-4884 | <a = href=3D"mailto:richiepiovanetti@healthcareinfopartners.com">richiepiovanet= ti(a)healthcareinfopartners.com</a><br><br><br><br><br><br></div><br><div><d= iv>On Aug 2, 2013, at 3:10 AM, Joop <<a = href=3D"mailto:jvdwege@xs4all.nl">jvdwege(a)xs4all.nl</a>> = wrote:</div><br class=3D"Apple-interchange-newline"><blockquote = type=3D"cite">Hello Ritchie,<br><br><blockquote type=3D"cite">In a = conversation via IRC, someone suggested that I activate "dnsmask" to = overcome what appears to be a DNS problem.  I'll try that other = possibility once I get home later today.<br><br>In the mean time, what = do you mean by "fixing the hostname"=85?  I opened and fixed the = HOSTNAMES and changed it from "localhost-localdomain" to = "localhost.localdomain" and that made no difference.  Albeit, after = changing I didm;t restart, remove ovirtEngine ((using "engine-cleanup") = and reinstalled via "engine-setup".  Is that what you = mean=85?<br><br><br><br>In the mean time, the fact that even if I = resolve the issue of oVirtEngine I will not be able to connect to the = oVirt Nodes unless I have DNS resolution, apparently means I should do = something with resolving via DNS in my home LAN (i.e implement some sort = of "DNS Cache" so I can resolve my home computers via DNS inside my = LAN).<br><br>Any suggestions are MORE THAN WELCOME=85!!!<br> =  <br></blockquote><br>Having setup ovirt more than I can count = right now I share your feeling that it isn't always clear why things are = going wrong, but in this case I suspect that there is a rather small = thing missing.<br>In short if you setup ovirt-engine, either using = virtualbox or on real hardware, and you give your host a meaningfull = name AND you add that info also in your /etc/hosts file than things = SHOULD work, no need for dnsmasq or even bind. Would make things easier = once you start adding virt hosts to you infrastructure since you will = need to duplicate these actions on each host (add engine name/ip to each = host and add each host to the others and all hosts to = engine)<br><br>Just ask if you need more assistance and I will write = down a small howto that should work out of the box else I might have = some time to see if I can get things = going.<br><br>Regards,<br><br>Joop<br><br></blockquote></div><br></div></b= ody></html>= --Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241--

5 years, 11 months

2
1
0 / 0

Re: [ovirt-users] Question about the ovirt-engine-sdk-java

by Michael Pasternak

------=_Part_1975902_834617789.1445161505459 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Hi=C2=A0Salifou, Actually java sdk is=C2=A0intentionally=C2=A0hiding transport level interna= ls so developers could stay in java domain,if your headers are static, easi= est way would be using reverse proxy in a middle to intercept requests,=C2= =A0 can you tell me why do you need this? =20 On Friday, October 16, 2015 1:14 AM, Salifou Sidi M. Malick <ssidimah@= redhat.com> wrote: =20 Hi Micheal, I have a question about the ovirt-engine-sdk-java. Is there a way to add custom request headers to each RHEVM API call? Here is an example of a request that I would like to do: $ curl -v -k \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "ID: user1(a)ad.xyz.com" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "PASSWORD: Pwssd" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "TARGET: kobe" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 https://vm0.smalick.com/api/hosts I would like to add ID, PASSWORD and TARGET as HTTP request header.=20 Thanks, Salifou ------=_Part_1975902_834617789.1445161505459 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable <html><head></head><body><div style=3D"color:#000; background-color:#fff; f= ont-family:HelveticaNeue-Light, Helvetica Neue Light, Helvetica Neue, Helve= tica, Arial, Lucida Grande, sans-serif;font-size:13px"><div id=3D"yui_3_16_= 0_1_1445160422533_3555" dir=3D"ltr"><span id=3D"yui_3_16_0_1_1445160422533_= 4552">Hi </span><span style=3D"font-family: 'Helvetica Neue', 'Segoe U= I', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"yui_3_16_0_1_1445= 160422533_3568" class=3D"">Salifou,</span></div><div id=3D"yui_3_16_0_1_144= 5160422533_3555" dir=3D"ltr"><span style=3D"font-family: 'Helvetica Neue', = 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" class=3D""><br>= </span></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span = style=3D"font-family: 'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Luci= da Grande', sans-serif;" class=3D"" id=3D"yui_3_16_0_1_1445160422533_3595">= Actually java sdk is </span><span style=3D"font-family: 'Helvetica Neu= e', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"yui_3= _16_0_1_1445160422533_4360" class=3D"">intentionally </span><span styl= e=3D"font-family: 'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Lucida G= rande', sans-serif;" id=3D"yui_3_16_0_1_1445160422533_4362" class=3D"">hidi= ng transport level internals so developers could stay in java domain,</span= ></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span class= =3D"" id=3D"yui_3_16_0_1_1445160422533_4435"><font face=3D"Helvetica Neue, = Segoe UI, Helvetica, Arial, Lucida Grande, sans-serif" id=3D"yui_3_16_0_1_1= 445160422533_4432" class=3D"">if your headers are static, easiest way would= be using reverse proxy in a middle to intercept requests, </font><br>= </span></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span = class=3D""><font face=3D"Helvetica Neue, Segoe UI, Helvetica, Arial, Lucida= Grande, sans-serif" class=3D""><br></font></span></div><div id=3D"yui_3_16= _0_1_1445160422533_3555" dir=3D"ltr"><span style=3D"font-family: 'Helvetica= Neue', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"y= ui_3_16_0_1_1445160422533_4357">can you tell me why do you need this?</span= ><br></div> <br><div class=3D"qtdSeparateBR"><br><br></div><div class=3D"y= ahoo_quoted" style=3D"display: block;"> <div style=3D"font-family: Helvetic= aNeue-Light, Helvetica Neue Light, Helvetica Neue, Helvetica, Arial, Lucida= Grande, sans-serif; font-size: 13px;"> <div style=3D"font-family: Helvetic= aNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-si= ze: 16px;"> <div dir=3D"ltr"> <font size=3D"2" face=3D"Arial"> On Friday, O= ctober 16, 2015 1:14 AM, Salifou Sidi M. Malick <ssidimah(a)redhat.com>= wrote:<br> </font> </div> <br><br> <div class=3D"y_msg_container">Hi Mich= eal,<br><br>I have a question about the ovirt-engine-sdk-java.<br><br>Is th= ere a way to add custom request headers to each RHEVM API call?<br><br>Here= is an example of a request that I would like to do:<br><br>$ curl -v -k \<= br>          -H "ID: <a ymailto=3D"mailto:user1@ad= .xyz.com" href=3D"mailto:user1@ad.xyz.com">user1(a)ad.xyz.com</a>" \<br>&nbsp= ;         -H "PASSWORD: Pwssd" \<br>    &nbsp= ;     -H "TARGET: kobe" \<br>          <= a href=3D"https://vm0.smalick.com/api/hosts" target=3D"_blank">https://vm0.= smalick.com/api/hosts</a><br><br><br>I would like to add ID, PASSWORD and T= ARGET as HTTP request header. <br><br>Thanks,<br>Salifou<br><br><br><br></d= iv> </div> </div> </div></div></body></html> ------=_Part_1975902_834617789.1445161505459--

5 years, 11 months

2
1
0 / 0

[Users] oVirt Weekly Sync Meeting Minutes -- 2012-05-23

by Mike Burns

Minutes: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.html Minutes (text): http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.txt Log: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html ========================= #ovirt: oVirt Weekly Sync ========================= Meeting started by mburns at 14:00:23 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html . Meeting summary --------------- * agenda and roll call (mburns, 14:00:41) * Status of next release (mburns, 14:05:17) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822145 (mburns, 14:05:29) * AGREED: freeze date and beta release delayed by 1 week to 2012-06-07 (mburns, 14:12:33) * post freeze, release notes flag needs to be used where required (mburns, 14:14:21) * https://bugzilla.redhat.com/show_bug.cgi?id=821867 is a VDSM blocker for 3.1 (oschreib, 14:17:27) * ACTION: dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas (oschreib, 14:21:44) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822158 (mburns, 14:23:39) * assignee not available, update to come tomorrow (mburns, 14:24:59) * ACTION: oschreib to make sure BZ#822158 is handled quickly (oschreib, 14:25:29) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824397 (mburns, 14:28:55) * 824397 expected to be merged prior next week's meeting (mburns, 14:29:45) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824420 (mburns, 14:30:15) * tracker for node based on F17 (mburns, 14:30:28) * blocked by util-linux bug currently (mburns, 14:30:40) * new build expected from util-linux maintainer in next couple days (mburns, 14:30:55) * sub-project status -- engine (mburns, 14:32:49) * nothing to report outside of blockers discussed above (mburns, 14:34:00) * sub-project status -- vdsm (mburns, 14:34:09) * nothing outside of blockers above (mburns, 14:35:36) * sub-project status -- node (mburns, 14:35:43) * working on f17 migration, but blocked by util-linux bug (mburns, 14:35:58) * should be ready for freeze deadline (mburns, 14:36:23) * Review decision on Java 7 and Fedora jboss rpms in oVirt Engine (mburns, 14:36:43) * Java7 basically working (mburns, 14:37:19) * LINK: http://gerrit.ovirt.org/#change,4416 (oschreib, 14:39:35) * engine will make ack/nack statement next week (mburns, 14:39:49) * fedora jboss rpms patch is in review, short tests passed (mburns, 14:40:04) * engine ack on fedora jboss rpms and java7 needed next week (mburns, 14:44:47) * Upcoming Workshops (mburns, 14:45:11) * NetApp workshop set for Jan 22-24 2013 (mburns, 14:47:16) * already at half capacity for Workshop at LinuxCon Japan (mburns, 14:47:37) * please continue to promote it (mburns, 14:48:19) * proposal: board meeting to be held at all major workshops (mburns, 14:48:43) * LINK: http://www.ovirt.org/wiki/OVirt_Global_Workshops (mburns, 14:49:30) * Open Discussion (mburns, 14:50:12) * oVirt/Quantum integration discussion will be held separately (mburns, 14:50:43) Meeting ended at 14:52:47 UTC. Action Items ------------ * dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas * oschreib to make sure BZ#822158 is handled quickly Action Items, by person ----------------------- * dougsland * dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas * oschreib * oschreib to make sure BZ#822158 is handled quickly * **UNASSIGNED** * (none) People Present (lines said) --------------------------- * mburns (98) * oschreib (55) * doronf (12) * lh (11) * sgordon (8) * dougsland (8) * ovirtbot (6) * ofrenkel (4) * cestila (2) * RobertMdroid (2) * ydary (2) * rickyh (1) * yzaslavs (1) * cctrieloff (1) * mestery_ (1) * dustins (1) Generated by `MeetBot`_ 0.1.4 .. _`MeetBot`: http://wiki.debian.org/MeetBot

5 years, 11 months

2
1
0 / 0

[QE][ACTION REQUIRED] oVirt 3.5.1 RC status - postponed

by Sandro Bonazzola

Hi, We have still blockers for oVirt 3.5.1 RC release so we need to postpone it until they'll be fixed. The bug tracker [1] shows 1 open blocker: Bug ID Whiteboard Status Summary 1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. - ACTION: Gilad please provide ETA on above blocker, the new proposed RC date will be decided on the given ETA. Maintainers: - Please be sure that 3.5 snapshot allow to create VMs - Please be sure that no pending patches are going to block the release - If any patch must block the RC release please raise the issue as soon as possible. There are still 57 bugs [2] targeted to 3.5.1. Excluding node and documentation bugs we still have 37 bugs [3] targeted to 3.5.1. Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed. - ACTION: Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1: it will ease gathering the blocking bugs for next releases. - ACTION: Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr [4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

5 years, 11 months

2
1
0 / 0

VM has paused due to no storage space error

by Sandvik Agustin

Hi users, I have this problem that sometimes 1 to 3 VM just automatically paused with user interaction and getting this error "VM has paused due to no storage space error". any inputs from you guys are very appreciated. TIA Sandvik

5 years, 11 months

5
5
0 / 0

VM Import from remote libvirt Server on web gui with Host key verification failed or permission denied error

by Rogério Ceni Coelho

Hi Ovirt Jedi´s !!! First of all, congratulations for this amazing product. I am an Vmware and Hyper-V Engineer but i am very excited with oVirt. Now, let´s go to work ... :-) I am trying to Import vm from remote libvirt server on web gui but i was unable to solve the problem until now. [image: pasted1] Node logs : [root@hlg-rbs-ovirt-kvm01-poa ~]# tail -f /var/log/vdsm/vdsm.log | grep -i error | grep -v Host.getStats jsonrpc.Executor/0::ERROR::2016-10-06 10:24:52,432::v2v::151::root::(get_external_vms) error connection to hypervisor: 'Cannot recv data: Permission denied, please try again.\r\nPermission denied, please try again.\r\nPermission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer' jsonrpc.Executor/0::INFO::2016-10-06 10:24:52,433::__init__::513::jsonrpc.JsonRpcServer::(_serveRequest) RPC call Host.getExternalVMs failed (error 65) in 10.05 seconds [root@hlg-rbs-ovirt-kvm02-poa ~]# grep error /var/log/vdsm/vdsm.log | grep get_external_vms jsonrpc.Executor/7::ERROR::2016-10-06 10:25:37,344::v2v::151::root::(get_external_vms) error connection to hypervisor: 'Cannot recv data: Host key verification failed.: Connection reset by peer' [root@hlg-rbs-ovirt-kvm02-poa ~]# Engine Logs : [root@hlg-rbs-ovirt01-poa ~]# tail -f /var/log/ovirt-engine/engine.log 2016-10-06 10:24:42,377 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] START, GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm01-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='5feddfba-d7b2-423e-a946-ac2bf36906fa', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'}), log id: eb750c7 *2016-10-06 10:24:53,435 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again.* *Permission denied, please try again.* *Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer]* 2016-10-06 10:24:53,435 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Failed in 'GetVmsFromExternalProviderVDS' method 2016-10-06 10:24:53,435 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer] 2016-10-06 10:24:53,454 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-97) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM hlg-rbs-ovirt-kvm01-poa.rbs.com.br command failed: Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer 2016-10-06 10:24:53,454 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@6c6f696c' 2016-10-06 10:24:53,454 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] HostName = hlg-rbs-ovirt-kvm01-poa.rbs.com.br 2016-10-06 10:24:53,454 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Command 'GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm01-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='5feddfba-d7b2-423e-a946-ac2bf36906fa', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'})' execution failed: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 2016-10-06 10:24:53,454 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id: eb750c7 2016-10-06 10:24:53,459 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-97) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: Failed to retrieve VMs information from external server qemu+ssh://root@prd-openshift-kvm03-poa.rbs.com.br/system 2016-10-06 10:24:53,459 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-97) [] Query 'GetVmsFromExternalProviderQuery' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) 2016-10-06 10:24:53,460 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-97) [] Exception: org.ovirt.engine.core.common.errors.EngineException: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103) [bll.jar:] at org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33) [dal.jar:] at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529) [bll.jar:] at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13) [bll.jar:] at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) [weld-core-impl-2.3.2.Final.jar:2.3.2.Final] at org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45) [wildfly-ee-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636) at org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195) at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73) at org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown Source) [common.jar:] at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53) at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196) at com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172) at com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233) at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129) at org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132) at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73) [branding.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84) at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62) at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36) at org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131) at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51) at io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46) at io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64) at io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56) at io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60) at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77) at io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50) at io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284) at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263) at io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81) at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174) at io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) at io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) [rt.jar:1.8.0_102] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) [rt.jar:1.8.0_102] at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102] 2016-10-06 10:25:27,202 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] START, GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm02-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='f9c9d929-b460-4102-bb29-de1e6ad6ad72', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'}), log id: 4f3174a6 *2016-10-06 10:25:38,338 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Host key verification failed.: Connection reset by peer]* 2016-10-06 10:25:38,338 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Failed in 'GetVmsFromExternalProviderVDS' method 2016-10-06 10:25:38,338 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Host key verification failed.: Connection reset by peer] 2016-10-06 10:25:38,343 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-113) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM hlg-rbs-ovirt-kvm02-poa.rbs.com.br command failed: Cannot recv data: Host key verification failed.: Connection reset by peer 2016-10-06 10:25:38,343 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@42dd60af' 2016-10-06 10:25:38,343 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] HostName = hlg-rbs-ovirt-kvm02-poa.rbs.com.br 2016-10-06 10:25:38,343 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Command 'GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm02-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='f9c9d929-b460-4102-bb29-de1e6ad6ad72', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'})' execution failed: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key verification failed.: Connection reset by peer, code = 65 2016-10-06 10:25:38,343 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id: 4f3174a6 2016-10-06 10:25:38,344 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-113) [] Query 'GetVmsFromExternalProviderQuery' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key verification failed.: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) 2016-10-06 10:25:38,345 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-113) [] Exception: org.ovirt.engine.core.common.errors.EngineException: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key verification failed.: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103) [bll.jar:] at org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33) [dal.jar:] at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529) [bll.jar:] at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13) [bll.jar:] at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) [weld-core-impl-2.3.2.Final.jar:2.3.2.Final] at org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45) [wildfly-ee-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636) at org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195) at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73) at org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown Source) [common.jar:] at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53) at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196) at com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172) at com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233) at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129) at org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132) at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73) [branding.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84) at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62) at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36) at org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131) at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51) at io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46) at io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64) at io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56) at io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60) at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77) at io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50) at io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284) at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263) at io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81) at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174) at io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) at io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) [rt.jar:1.8.0_102] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) [rt.jar:1.8.0_102] at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102] 2016-10-06 10:25:52,527 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] START, GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm03-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='02ead14e-0208-4a74-b1c2-4c19383820f9', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'}), log id: 7c8b1e2d 2016-10-06 10:26:02,695 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer] 2016-10-06 10:26:02,695 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Failed in 'GetVmsFromExternalProviderVDS' method 2016-10-06 10:26:02,696 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer] 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-118) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM hlg-rbs-ovirt-kvm03-poa.rbs.com.br command failed: Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer 2016-10-06 10:26:02,701 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@5ce9f7f2' 2016-10-06 10:26:02,701 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] HostName = hlg-rbs-ovirt-kvm03-poa.rbs.com.br 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Command 'GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm03-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='02ead14e-0208-4a74-b1c2-4c19383820f9', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'})' execution failed: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 2016-10-06 10:26:02,701 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id: 7c8b1e2d 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-118) [] Query 'GetVmsFromExternalProviderQuery' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-118) [] Exception: org.ovirt.engine.core.common.errors.EngineException: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103) [bll.jar:] at org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33) [dal.jar:] at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529) [bll.jar:] at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13) [bll.jar:] at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) [weld-core-impl-2.3.2.Final.jar:2.3.2.Final] at org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45) [wildfly-ee-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636) at org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195) at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73) at org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown Source) [common.jar:] at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53) at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196) at com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172) at com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233) at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129) at org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132) at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73) [branding.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84) at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62) at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36) at org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131) at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51) at io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46) at io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64) at io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56) at io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60) at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77) at io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50) at io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284) at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263) at io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81) at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174) at io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) at io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) [rt.jar:1.8.0_102] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) [rt.jar:1.8.0_102] at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102] ^C [root@hlg-rbs-ovirt01-poa ~]# When i try with virsh i have sucess. [root@hlg-rbs-ovirt-kvm01-poa ~]# virsh -c qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system The authenticity of host 'prd-openshift-kvm03-poa.rbs.com.br (10.1.8.32)' can't be established. ECDSA key fingerprint is af:e9:12:29:65:ad:41:ab:0a:3c:a1:f0:73:1c:62:a5. Are you sure you want to continue connecting (yes/no)? yes root(a)prd-openshift-kvm03-poa.rbs.com.br's password: Welcome to virsh, the virtualization interactive terminal. Type: 'help' for help with commands 'quit' to quit virsh # list Id Name State ---------------------------------------------------- 5 prd-openshift-etcd03-poa running 6 prd-openshift-master03-poa running 8 prd-openshift-node03-poa running virsh # list --all Id Name State ---------------------------------------------------- 5 prd-openshift-etcd03-poa running 6 prd-openshift-master03-poa running 8 prd-openshift-node03-poa running - teste shut off - teste1 shut off - tpl-centos72-64 shut off virsh # quit [root@hlg-rbs-ovirt-kvm01-poa ~]# Thanks.

5 years, 11 months

3
2
0 / 0

Libvirt ERROR cannot access backing file after importing VM from OpenStack

by Vrgotic, Marko

Dear oVirt team, When trying to start imported VM, it fails with following message: ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-2) [] EVENT_ID: VM_DOWN_ERROR(119), VM instance-00000673 is down with error. Exit message: Cannot access backing file '/var/lib/nova/instances/_base/2f4f8c5fc11bb83bcab03f4c829ddda4da8c0bce' of storage file '/rhev/data-center/mnt/glusterSD/aws-gfs-01.awesome.lan:_gv0__he/2607c265-248c-40ad-b020-f3756454839e/images/816ac00f-ba98-4827-b5c8-42a8ba496089/8ecfcd5b-db67-4c23-9869-0e20d7553aba' (as uid:107, gid:107): No such file or directory. Platform details: Ovirt SHE Version 4.2.2.6-1.el7.centos GlusterFS, unmanaged by oVirt. VM is imported & converted from OpenStack, according to log files, successfully (one WARN, related to different MAC address): 2018-05-24 12:03:31,028+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsNamesFromExternalProviderVDSCommand] (default task-29) [cc5931a2-1af5-4d65-b0b3-362588db9d3f] FINISH, GetVmsNamesFromExternalProviderVDSCommand, return: [VM [instance-0001f94c], VM [instance-00078f6a], VM [instance-00000814], VM [instance-0001f9ac], VM [instance-000001ff], VM [instance-0001f718], VM [instance-00000673], VM [instance-0001ecf2], VM [instance-00078d38]], log id: 7f178a5e 2018-05-24 12:48:33,722+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsNamesFromExternalProviderVDSCommand] (default task-8) [103d56e1-7449-4853-ae50-48ee94d43d77] FINISH, GetVmsNamesFromExternalProviderVDSCommand, return: [VM [instance-0001f94c], VM [instance-00078f6a], VM [instance-00000814], VM [instance-0001f9ac], VM [instance-000001ff], VM [instance-0001f718], VM [instance-00000673], VM [instance-0001ecf2], VM [instance-00078d38]], log id: 3aa178c5 2018-05-24 12:48:47,291+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFullInfoFromExternalProviderVDSCommand] (default task-17) [4bf555c7-9d64-4ecc-b059-8a60a4b27bdd] START, GetVmsFullInfoFromExternalProviderVDSCommand(HostName = aws-ovhv-01, GetVmsFromExternalProviderParameters:{hostId='cbabe1e8-9e7f-4c4b-be9c-49154953564d', url='qemu+tcp://root@172.19.0.12/system', username='null', originType='KVM', namesOfVms='[instance-00000673]'}), log id: 4c445109 2018-05-24 12:48:47,318+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFullInfoFromExternalProviderVDSCommand] (default task-17) [4bf555c7-9d64-4ecc-b059-8a60a4b27bdd] FINISH, GetVmsFullInfoFromExternalProviderVDSCommand, return: [VM [instance-00000673]], log id: 4c445109 2018-05-24 12:49:20,466+02 INFO [org.ovirt.engine.core.bll.exportimport.ImportVmFromExternalProviderCommand] (default task-41) [14edb003-b4a0-4355-b3de-da2b68774fe3] Lock Acquired to object 'EngineLock:{exclusiveLocks='[instance-00000673=VM_NAME, 1f0b608f-7cfc-4b27-a876-b5d8073011a1=VM]', sharedLocks=''}' 2018-05-24 12:49:20,586+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653408) [14edb003-b4a0-4355-b3de-da2b68774fe3] EVENT_ID: MAC_ADDRESS_IS_EXTERNAL(925), VM instance-00000673 has MAC address(es) fa:16:3e:74:18:50, which is/are out of its MAC pool definitions. 2018-05-24 12:49:21,021+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653408) [14edb003-b4a0-4355-b3de-da2b68774fe3] EVENT_ID: IMPORTEXPORT_STARTING_IMPORT_VM(1,165), Starting to import Vm instance-00000673 to Data Center AVEUNL, Cluster AWSEUOPS 2018-05-24 12:49:28,816+02 INFO [org.ovirt.engine.core.bll.exportimport.ImportVmFromExternalProviderCommand] (EE-ManagedThreadFactory-engine-Thread-653407) [] Lock freed to object 'EngineLock:{exclusiveLocks='[instance-00000673=VM_NAME, 1f0b608f-7cfc-4b27-a876-b5d8073011a1=VM]', sharedLocks=''}' 2018-05-24 12:49:28,911+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ConvertVmVDSCommand] (EE-ManagedThreadFactory-commandCoordinator-Thread-2) [2047673e] START, ConvertVmVDSCommand(HostName = aws-ovhv-01, ConvertVmVDSParameters:{hostId='cbabe1e8-9e7f-4c4b-be9c-49154953564d', url='qemu+tcp://root@172.19.0.12/system', username='null', vmId='1f0b608f-7cfc-4b27-a876-b5d8073011a1', vmName='instance-00000673', storageDomainId='2607c265-248c-40ad-b020-f3756454839e', storagePoolId='5a5de92c-0120-0167-03cb-00000000038a', virtioIsoPath='null', compatVersion='null', Disk0='816ac00f-ba98-4827-b5c8-42a8ba496089'}), log id: 53408517 2018-05-24 12:49:29,010+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-commandCoordinator-Thread-2) [2047673e] EVENT_ID: IMPORTEXPORT_STARTING_CONVERT_VM(1,193), Starting to convert Vm instance-00000673 2018-05-24 12:52:57,982+02 INFO [org.ovirt.engine.core.bll.UpdateVmCommand] (default task-16) [df1d5f72-eb17-46e4-9946-20ca9809b54c] Failed to Acquire Lock to object 'EngineLock:{exclusiveLocks='[instance-00000673=VM_NAME]', sharedLocks='[1f0b608f-7cfc-4b27-a876-b5d8073011a1=VM]'}' 2018-05-24 12:59:24,575+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-20) [2047673e] EVENT_ID: IMPORTEXPORT_IMPORT_VM(1,152), Vm instance-00000673 was imported successfully to Data Center AVEUNL, Cluster AWSEUOPS Than trying to start VM fails with following messages: 2018-05-24 13:00:32,085+02 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653729) [] EVENT_ID: USER_STARTED_VM(153), VM instance-00000673 was started by admin@internal-authz (Host: aws-ovhv-06). 2018-05-24 13:00:33,417+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-9) [] VM '1f0b608f-7cfc-4b27-a876-b5d8073011a1'(instance-00000673) moved from 'WaitForLaunch' --> 'Down' 2018-05-24 13:00:33,436+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-9) [] EVENT_ID: VM_DOWN_ERROR(119), VM instance-00000673 is down with error. Exit message: Cannot access backing file '/var/lib/nova/instances/_base/2f4f8c5fc11bb83bcab03f4c829ddda4da8c0bce' of storage file '/rhev/data-center/mnt/glusterSD/aws-gfs-01.awesome.lan:_gv0__he/2607c265-248c-40ad-b020-f3756454839e/images/816ac00f-ba98-4827-b5c8-42a8ba496089/8ecfcd5b-db67-4c23-9869-0e20d7553aba' (as uid:107, gid:107): No such file or directory. 2018-05-24 13:00:33,437+02 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-9) [] add VM '1f0b608f-7cfc-4b27-a876-b5d8073011a1'(instance-00000673) to rerun treatment 2018-05-24 13:00:33,455+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653732) [] EVENT_ID: USER_INITIATED_RUN_VM_FAILED(151), Failed to run VM instance-00000673 on Host aws-ovhv-06. 2018-05-24 13:00:33,460+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-653732) [] EVENT_ID: USER_FAILED_RUN_VM(54), Failed to run VM instance-00000673 (User: admin@internal-authz). Checking on the Gluster volume, directory and files exist, permissions are in order: [root@aws-ovhv-01 816ac00f-ba98-4827-b5c8-42a8ba496089] -rw-rw----. 1 vdsm kvm 14G May 24 12:59 8ecfcd5b-db67-4c23-9869-0e20d7553aba -rw-rw----. 1 vdsm kvm 1.0M May 24 12:49 8ecfcd5b-db67-4c23-9869-0e20d7553aba.lease -rw-r--r--. 1 vdsm kvm 310 May 24 12:49 8ecfcd5b-db67-4c23-9869-0e20d7553aba.meta Than I have checked image info, and noticed that backing file entry is pointing to non-existing location, which does and should not exist on oVirt hosts: [root@aws-ovhv-01 816ac00f-ba98-4827-b5c8-42a8ba496089]# qemu-img info 8ecfcd5b-db67-4c23-9869-0e20d7553aba image: 8ecfcd5b-db67-4c23-9869-0e20d7553aba file format: qcow2 virtual size: 160G (171798691840 bytes) disk size: 14G cluster_size: 65536 backing file: /var/lib/nova/instances/_base/2f4f8c5fc11bb83bcab03f4c829ddda4da8c0bce Format specific information: compat: 1.1 lazy refcounts: false refcount bits: 16 corrupt: false Can somebody advise me how to fix, address this, as I am in need of importing 200+ VMs from OpenStack to oVirt? Kindly awaiting your reply. Marko Vrgotic

5 years, 11 months

7
36
0 / 0

Change host names/IPs

by Davide Ferrari

Hello Is there a clean way and possibly without downtime to change the hostname and IP addresses of all the hosts in a running oVirt cluster? -- Davide Ferrari Senior Systems Engineer

5 years, 11 months

4
7
0 / 0

Permission Problem for admin portal

by s.gay＠ovea.com

Hello, I'm using the lastest ovirt release. I would like to add a cluster permission for a user. This user should only see this cluster and not other information or other cluster I've create a new user in internal or external When the ClusterAdmin role is added in the permission tab of a cluster, the user can access the entire infrastructure through the user portal or administrator portal. It can modify other VMs, ... I checked the other cluster and the user does not appear in the permissions When I add the UserRole role to the cluster and remove the ClusterAdmin role, it sees only the VMs in the cluster in the user portal When the user creating a VM, he can see all the cluster in the drop-down window for cluster selection It's possible to add only a cluster permission for users ? Thanks

5 years, 11 months

3
2
0 / 0

Node losing management network address?

by Juhani Rautiainen

Hi! I had weird occurence in my two node ovirt cluster today (I have HE). I noticed that one node had ovirtmgmt network unsynchronized. I tried to resynchronize it. This led the node being rebooted by HP ILO. After reboot the node came up with DHCP address. Tried to change it back by fixing ifcfg-ovirtmgmt to original static address. It reverter back to DHCP if I tried the resync the network. I decided to remove HE from the node in order to remove the node in order to be able to add it back. After I started HE removal, address popped back to static address. I did upgrade which was pending on node and after reboot it came back with DHCP address again. After this I removed the node from the cluster, added it back and now it seems to work. I'm just wondering how I prevent this from happening again? How this unsync situation happens for instance and why it decides that DHCP is the way to go? -Juhani

5 years, 11 months

5
11
0 / 0

VMs import over slow 1gig interface instead of fast 10gig interface?

by Jacob Green

Ok, so I want to try and more thoroughly explain my situation. I want to better understand what is happening, and if there is a way to force import over the faster connection. Today I have two Ovirt environments, one on 4.1 and one on 4.2, on the new environment we have migrated to new VLANs for Management and Data. The export domain is a NFS domain hosted on a Trunas device that has an ip address of X.X.12.100. Our host has multiple Ethernet connections, one Bonded 20Gigabit interface. That is where we have the ovirtmgmt profile. And a secondary 1 Gigabit interface that we call our VLAN12 profile or server VLAN. *The problem.... *When importing a VM from the export domain, the import is happening over the 1Gigabit interface on the VLAN12 profile. Instead of the 20gigabit Bonded interface on VLAN 100. *My understanding.... *So I probably just misunderstand how this works, but here is what I thought should happen, in the *Setup Host Network* screen for this host I have the ovirtmgmt on VLAN100 with the bonded 20Gigabit interface performing the following. "*Management, Display, Migration, VM and Default Route*." Then I have the secondary 1 Gigabit interface just doing "*VM*" on VLAN12. What I thought should happen is that anything Migration related "*/Includes importing from export domain?/*" should happen on the Migration interface, which in my case is the ovritmgmt interface on VLAN100. I have also confirmed that I can ping from the VLAN100 ovirtmgmt interface to the storage on VLAN12. So there is connectivity from that interface to the storage. What I am trying to figure out is there a way to force it to do imports over the 20Gigabit interface that resides on VLAN100 instead of the slower VLAN12 interface, that is just there for general VM connectivity. Thank you for any advice or guidance on this matter. -- Jacob Green Systems Admin American Alloy Steel

5 years, 11 months

7
9
0 / 0

[Users] Lifecycle / upgradepath

by Sven Kieske

Hi Community, Currently, there is no single document describing supported (which means: working ) upgrade scenarios. I think the project has matured enough, to have such an supported upgradepath, which should be considered in the development of new releases. As far as I know, currently it is supported to upgrade from x.y.z to x.y.z+1 and from x.y.z to x.y+1.z but not from x.y-1.z to x.y+1.z directly. maybe this should be put together in a wiki page at least. also it would be cool to know how long a single "release" would be supported. In this context I would define a release as a version bump from x.y.z to x.y+1.z or to x+1.y.z a bump in z would be a bugfix release. The question is, how long will we get bugfix releases for a given version? What are your thoughts? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

5 years, 11 months

2
1
0 / 0

Planned restart of production services

by Evgheni Dereveanchin

Hi everyone, I will be restarting several production systems within the following hour to apply updates. The following services may be unreachable for some period of time: - resources.ovirt.org - package repositories - jenkins.ovirt.org - CI master Package repositories will be unreachable for a short period of time. No new CI jobs will be started during this period. I will announce you once maintenance is complete. -- Regards, Evgheni Dereveanchin

5 years, 11 months

1
1
0 / 0

[Users] Nested virtualization with Opteron 2nd generation and oVirt 3.1 possible?

by Gianluca Cecchi

Hello, I have 2 physical servers with Opteron 2nd gen cpu. There is CentOS 6.3 installed and some VM already configured on them. Their /proc/cpuinfo contains ... model name : Dual-Core AMD Opteron(tm) Processor 8222 ... kvm_amd kernel module is loaded with its default enabled nested option # systool -m kvm_amd -v Module = "kvm_amd" Attributes: initstate = "live" refcnt = "15" srcversion = "43D8067144E7D8B0D53D46E" Parameters: nested = "1" npt = "1" ... I already configured a fedora 17 VM as a oVirt 3.1 Engine I'm trying to configure another VM as oVirt 3.1 node with ovirt-node-iso-2.5.5-0.1.fc17.iso It seems I'm not able to configure so that ovirt install doesn't complain. After some attempts, I tried this in my vm.xml for the cpu: <cpu mode='custom' match='exact'> <model fallback='allow'>athlon</model> <vendor>AMD</vendor> <feature policy='require' name='pni'/> <feature policy='require' name='rdtscp'/> <feature policy='force' name='svm'/> <feature policy='require' name='clflush'/> <feature policy='require' name='syscall'/> <feature policy='require' name='lm'/> <feature policy='require' name='cr8legacy'/> <feature policy='require' name='ht'/> <feature policy='require' name='lahf_lm'/> <feature policy='require' name='fxsr_opt'/> <feature policy='require' name='cx16'/> <feature policy='require' name='extapic'/> <feature policy='require' name='mca'/> <feature policy='require' name='cmp_legacy'/> </cpu> Inside node /proc/cpuinfo becomes processor : 3 vendor_id : AuthenticAMD cpu family : 6 model : 2 model name : QEMU Virtual CPU version 0.12.1 stepping : 3 microcode : 0x1000065 cpu MHz : 3013.706 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall mmxext fxsr_opt lm nopl pni cx16 hypervisor lahf_lm cmp_legacy cr8_legacy bogomips : 6027.41 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: 2 questions: 1) Is there any combination in xml file to give to my VM so that oVirt doesn't complain about missing hardware virtualization with this processor? 2) suppose 1) is not possible in my case and I still want to test the interface and try some config operations to see for example the differences with RHEV 3.0, how can I do? At the moment this complaint about hw virtualization prevents me to activate the node. I get Installing Host f17ovn01. Step: RHEV_INSTALL. Host f17ovn01 was successfully approved. Host f17ovn01 running without virtualization hardware acceleration Detected new Host f17ovn01. Host state was set to Non Operational. Host f17ovn01 moved to Non-Operational state. Host f17ovn01 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags Can I lower the requirements to be able to operate without hw virtualization in 3.1? Thanks in advance, Gianluca

5 years, 11 months

2
1
0 / 0

Need VM run once api

by Chandrahasa S

This is a multipart message in MIME format. --=_alternative 00361B2065257E90_= Content-Type: text/plain; charset="US-ASCII" Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00361B2065257E90_= Content-Type: text/html; charset="US-ASCII" <font size=2 face="sans-serif">Hi Experts,</font> <br> <br><font size=2 face="sans-serif">We are integrating ovirt with our internal cloud.</font> <br> <br><font size=2 face="sans-serif">Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS.</font> <br> <br><font size=2 face="sans-serif">but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal.</font> <br> <br><font size=2 face="sans-serif">I believe we need to power ON vm using run once API, but we are not able get this API.</font> <br> <br><font size=2 face="sans-serif">Can some one help on this.</font> <br> <br><font size=2 face="sans-serif">I got reply on this query last time but unfortunately mail got deleted.</font> <br> <br><font size=2 face="sans-serif">Thanks & Regards<br> Chandrahasa S<br> </font><p>=====-----=====-----=====<br> Notice: The information contained in this e-mail<br> message and/or attachments to it may contain <br> confidential or privileged information. If you are <br> not the intended recipient, any dissemination, use, <br> review, distribution, printing or copying of the <br> information contained in this e-mail message <br> and/or attachments to it are strictly prohibited. If <br> you have received this communication in error, <br> please notify us by reply e-mail or telephone and <br> immediately and permanently delete the message <br> and any attachments. Thank you</p> <p></p> --=_alternative 00361B2065257E90_=--

5 years, 11 months

5
4
0 / 0

Ovirt Nested in VMWare (Working approach)

by RabidCicada

I worked through this previously and posted in IRC yesterday about working around running ovirt nested under VMWare. I figured i'd post it to the mail group so that it would be available in it's entirety here for future reference: The following gists explain the 3 major adjustments that have to be made currently to get nested virt under vmware working: https://gist.github.com/RabidCicada/993349b3a7eaf35637122f0122fdedb3 https://gist.github.com/RabidCicada/bc01eb0b13195faa26520c0fb666ec34 https://gist.github.com/RabidCicada/37ff6f1ed2afd8dd4edefac735536c69 https://gist.github.com/RabidCicada/40655db1582ca5d07c9bbf2c429cdd01 Hopefully it can save others the huge amount of time it took me to figure it all out. Specifically it's a problem with the --machine type at 3 major parts of the vm creation for the hosted-engine. 1) You have to fix the virt-install to use --machine pc-i440fx-rhel7.2.0 2) You have to fix the guestfish spinup of the partially configured vm to use --machine pc-i440fx-rhel7.2.0, where they edit the nic config among other things 3) You have to tell vdsm on the node to use --machine pc-i440fx-rhel7.2.0 I don't know the underlying reason why a --machine type > pc-i440fx-rhel7.2.0 breaks the system but it ends up resulting in a bios freeze. Again, Hope this helps someone. Suggested only to use for a test/dev system.

5 years, 12 months

2
1
0 / 0

[Users] importing from kvm into ovirt

by Jonathan Horne

--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable I need to import a kvm virtual machine from a standalone kvm into my ovirt = cluster. Standalone is using local storage, and my ovirt cluster is using = iscsi. Can i please have some advice on whats the best way to get this sys= tem into ovirt? Right now i see it as copying the .img file to somewhere=85 but i have no i= dea where to start. I found this directory on one of my ovirt nodes: /rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/master/v= ms But inside is just directories that appear to have uuid-type of names, and = i can't tell what belongs to which vm. Any advice would be greatly appreciated. Thanks, jonathan ________________________________ This is a PRIVATE message. If you are not the intended recipient, please de= lete without copying and kindly advise us by e-mail of the mistake in deliv= ery. NOTE: Regardless of content, this e-mail shall not operate to bind SKO= POS to any order or other contract unless pursuant to explicit written agre= ement or government initiative expressly permitting the use of e-mail for s= uch purpose. --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/html; charset="Windows-1252" Content-ID: <41FAB2B157C43549B6577A3495BA255C(a)collaborationhost.net> Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1= 252"> </head> <body style=3D"word-wrap:break-word; color:rgb(0,0,0); font-size:14px; font= -family:Calibri,sans-serif"> <div> <div> <div>I need to import a kvm virtual machine from a standalone kvm into my o= virt cluster.  Standalone is using local storage, and my ovirt cluster= is using iscsi.  Can i please have some advice on whats the best way = to get this system into ovirt?</div> </div> </div> <div><br> </div> <div>Right now i see it as copying the .img file to somewhere=85 but i have= no idea where to start.  I found this directory on one of my ovirt no= des:</div> <div><br> </div> <div>/rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/mas= ter/vms</div> <div><br> </div> <div>But inside is just directories that appear to have uuid-type of names,= and i can't tell what belongs to which vm.</div> <div><br> </div> <div>Any advice would be greatly appreciated.</div> <div><br> </div> <div>Thanks,</div> <div>jonathan</div> <br> <hr> <font color=3D"Gray" face=3D"Arial" size=3D"1">This is a PRIVATE message. I= f you are not the intended recipient, please delete without copying and kin= dly advise us by e-mail of the mistake in delivery. NOTE: Regardless of con= tent, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit wri= tten agreement or government initiative expressly permitting the use of e-m= ail for such purpose.</font> </body> </html> --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_--

5 years, 12 months

3
2
0 / 0

oVirt nVidia vGPU driver questions

by femi adegoke

I'm on oVirt 4.2.6. 1) If I have a Tesla P4 (Pascal) GPU (non-GRID), do I use nVidia vGPU driver for RHEL KVM 6.2 or the Linux KVM vGPU 6.2 driver? 2) If I have a Grid K1 or K2, I assume the correct driver would be GRID 4.7? 3) Must the vGPU driver be installed on the host & in the vm? 4) Must the vGPU driver be installed first before I can run "yum -y install vdsm-hook-vfio-mdev”

6 years

5
6
0 / 0

oVirt Node 4.3 Master on fc28

by femi adegoke

4.3 Master is looking good!! A few questions: - In Step #2: Fqdns: for a 3 host cluster, are we to add the 2nd & 3rd hosts? - In Step #5: Bricks: What effect does the RAID setting have? Enable Dedupe & Compression is new? Configure LV Cache: what do we enter for SSD? What happens if my disks are already all SSD, do I still benefit from using this?

6 years

4
11
0 / 0

Expand existing gluster storage in ovirt 4.2/4.3

by adrianquintero＠gmail.com

Hello, I have a 3 node ovirt 4.3 cluster that I've setup and using gluster (Hyperconverged setup) I need to increase the amount of storage and compute so I added a 4th host (server4.example.com) if it is possible to expand the amount of bricks (storage) in the "data" volume? I did some research and from that research the following caught my eye: old post "https://medium.com/@tumballi/scale-your-gluster-cluster-1-node-at-a-time-..." So the question is, if taking that approach feasible? , is it even possible an oVirt point of view? --------------------------- My gluster volume: --------------------------- Volume Name: data Type: Replicate Volume ID: 003ffea0-b441-43cb-a38f-ccdf6ffb77f8 Status: Started Snapshot Count: 0 Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: server1.example1.com:/gluster_bricks/data/data Brick2: server2.example.com:/gluster_bricks/data/data Brick3: server3.example.com:/gluster_bricks/data/data (arbiter) Options Reconfigured: cluster.granular-entry-heal: enable performance.strict-o-direct: on network.ping-timeout: 30 storage.owner-gid: 36 storage.owner-uid: 36 cluster.choose-local: off user.cifs: off features.shard: on cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 8 cluster.locking-scheme: granular cluster.data-self-heal-algorithm: full cluster.server-quorum-type: server cluster.quorum-type: auto cluster.eager-lock: enable network.remote-dio: enable performance.low-prio-threads: 32 performance.io-cache: off performance.read-ahead: off performance.quick-read: off transport.address-family: inet nfs.disable: on performance.client-io-threads: off Thanks.

6 years

3
4
1 / 0

Ovirt does not support AMD EPYC CPUs?

by Erick Perez

Hi, In its current release, OVIRT only shows AMD Opteron G1,G2,G3,G4,G5 and no mention of EPYC. This thread mentioned that a respin of Ovirt will address this, but never happened. https://lists.ovirt.org/archives/list/users@ovirt.org/message/2PEAYGK5PE3... comments?

6 years

1
0
0 / 0

Trying to reset password for ovirt wiki

by noc

This is a multi-part message in MIME format. --------------000005070002050708050606 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hoping someone can help me out. For some reason I keep getting the following error when I try to reset my password: Reset password * Error sending mail: Failed to add recipient: jvandewege(a)nieuwland.nl [SMTP: Invalid response code received from server (code: 554, response: 5.7.1 <jvandewege(a)nieuwland.nl>: Relay access denied)] Complete this form to receive an e-mail reminder of your account details. Since I receive the ML on this address it is definitely a working address. Tried my home account too and same error but then for my home provider, Relay denied ?? A puzzled user, Joop --------------000005070002050708050606 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hoping someone can help me out.<br> For some reason I keep getting the following error when I try to reset my password:<br> <br> <fieldset><legend>Reset password</legend> <div class="error"> <ul> <li>Error sending mail: Failed to add recipient: <a class="moz-txt-link-abbreviated" href="mailto:jvandewege@nieuwland.nl">jvandewege(a)nieuwland.nl</a> [SMTP: Invalid response code received from server (code: 554, response: 5.7.1 <a class="moz-txt-link-rfc2396E" href="mailto:jvandewege@nieuwland.nl"><jvandewege(a)nieuwland.nl></a>: Relay access denied)]</li> </ul> </div> <p>Complete this form to receive an e-mail reminder of your account details.<br> </p> </fieldset> <br> Since I receive the ML on this address it is definitely a working address.<br> Tried my home account too and same error but then for my home provider, Relay denied ??<br> <br> A puzzled user,<br> <br> Joop<br> <br> </body> </html> --------------000005070002050708050606--

6 years

2
1
0 / 0

ovirt-guest-agent issue on rhel5.5

by John Michael Mercado

Hi All, I need your help. Anyone who encounter the below error and have the solution? Can you help me how to fix this? MainThread::INFO::2015-01-27 10:22:53,247::ovirt-guest-agent::57::root::Starting oVirt guest agent MainThread::ERROR::2015-01-27 10:22:53,248::ovirt-guest-agent::138::root::Unhandled exception in oVirt guest agent! Traceback (most recent call last): File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 132, in ? agent.run(daemon, pidfile) File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 63, in run self.agent = LinuxVdsAgent(config) File "/usr/share/ovirt-guest-agent/GuestAgentLinux2.py", line 371, in __init__ AgentLogicBase.__init__(self, config) File "/usr/share/ovirt-guest-agent/OVirtAgentLogic.py", line 171, in __init__ self.vio = VirtIoChannel(config.get("virtio", "device")) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 150, in __init__ self._stream = VirtIoStream(vport_name) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 131, in __init__ self._vport = os.open(vport_name, os.O_RDWR) OSError: [Errno 2] No such file or directory: '/dev/virtio-ports/com.redhat.rhevm.vdsm' Thanks

6 years

2
1
0 / 0

[Users] oVirt Workshop at LinuxCon Japan 2012

by Leslie Hawthorn

Hello everyone, As part of our efforts to raise awareness of and educate more developers about the oVirt project, we will be holding an oVirt workshop at LinuxCon Japan, taking place on June 8, 2012. You can find full details of the workshop agenda on the LinuxCon Japan site. [0] Registration for the workshop is now open and is free of charge for the first 50 participants. We will also look at adding additional participant slots to the workshop based on demand. Attendees who register for LinuxCon Japan via the workshop registration link [1] will also be eligible for a discount on their LinuxCon Japan registration. Please spread the word to folks you think would find the workshop useful. If they have already registered for LinuxCon Japan, they can simply edit their existing registration to include the workshop. [0] - https://events.linuxfoundation.org/events/linuxcon-japan/ovirt-gluster-wo... [1] - http://www.regonline.com/Register/Checkin.aspx?EventID=1099949 Cheers, LH -- Leslie Hawthorn Community Action and Impact Open Source and Standards @ Red Hat identi.ca/lh twitter.com/lhawthorn

6 years

2
1
0 / 0

Re: huge page in ovirt 4.2.7

by Sharon Gratch

Hi Fabrice, The "hugepages" custom property value in oVirt should be set to *size of the pages in KiB* (i.e. 1GiB = 1048576, 2MiB = 2048). In addition, it is recommended to set the huge page size of the VM to the largest size supported by the host. In the configuration you sent, the huge page size of the VM is set to 64 KiB and since the VM's allocated memory size is at least 32,768 MiB then it requires at least (32768 * 1024/64=) 524,288 pages. Since you only have 120 pages declared in the host then it failed with an error "...there are not enough free huge pages to run the VM". So to solve the problem, please change the VM's huge page size to be the same as the host's huge page supported size which is 1GiB and therefore hugepages value should be 1048576 KiB instead of 64: <custom_property> <name>hugepages</name> <value>*1048576*</value> </custom_property> Please note that since total VM's memory size is no more than 64 GB then only 64 pages will be needed by the VM and it's < 120 pages supported by the host and therefore OK. Hope it helped. Regards, Sharon On Wed, Nov 14, 2018 at 2:11 PM, Fabrice Bacchella < fabrice.bacchella(a)orange.fr> wrote: > I'm trying to understand huge page in oVirt, I'm quite sure to understand > it well. > > I have an host with 128GiB. I have configured reserved huge page: > > cat /proc/cmdline > > ... hugepagesz=1GB hugepages=120 > > $ grep -r . /sys/kernel/mm/hugepages > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_overcommit_hugepages:0 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages:120 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages_mempolicy:120 > /sys/kernel/mm/hugepages/hugepages-1048576kB/surplus_hugepages:0 > /sys/kernel/mm/hugepages/hugepages-1048576kB/resv_hugepages:0 > /sys/kernel/mm/hugepages/hugepages-1048576kB/free_hugepages:120 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_overcommit_hugepages:0 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages:0 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages_mempolicy:0 > /sys/kernel/mm/hugepages/hugepages-2048kB/surplus_hugepages:0 > /sys/kernel/mm/hugepages/hugepages-2048kB/resv_hugepages:0 > /sys/kernel/mm/hugepages/hugepages-2048kB/free_hugepages:0 > > I have a big VM running on it: > <custom_properties> > <custom_property> > <name>hugepages</name> > <value>64</value> > </custom_property> > </custom_properties> > <memory>68719476736</memory>, aka 65536 MiB > <memory_policy> > <guaranteed>34359738368</guaranteed>, aka 32768 MiB > <max>68719476736</max> > </memory_policy> > > And it keep failing when I want to start it: > /var/log/ovirt-engine/engine.log:2018-11-14 12:56:06,937+01 ERROR > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (default task-66) [13c13a2c-f973-4ba2-b8bd-260e5b35a047] EVENT_ID: > USER_FAILED_RUN_VM(54), Failed to run VM XXX due to a failed validation: > [Cannot run VM. There is no host that satisfies current scheduling > constraints. See below for details:, The host XXX did not satisfy internal > filter HugePages because there are not enough free huge pages to run the > VM.] > > The huge page fs is mounted: > > $ findmnt > | |-/dev/hugepages1G hugetlbfs > hugetlbfs rw,relatime,pagesize=1G > | `-/dev/hugepages hugetlbfs > hugetlbfs rw,relatime > > What am I missing ? > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/communit > y/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archiv > es/list/users(a)ovirt.org/message/VTYKTSSAXQQLS5HO5KOQSBDIHPTAHTOR/ > >

6 years

2
1
0 / 0

Re: ERROR running your engine inside of the hosted-engine VM and are not in "Global Maintenance" mode

by Simone Tiraboschi

On Tue, Feb 5, 2019 at 1:46 PM Martin Humaj <mhumaj(a)gmail.com> wrote: > Hi the problem is that ovirt-engine is running on different vm like a > virtual machine under the hosts > > !! Cluster is in GLOBAL MAINTENANCE mode !! > I can set it on the host machine but not on the ovirt-engine vm > > Sorry, one thing more to mention: the check is performed against the latest information recorded in the DB. So if the engine is down, it's not going to update the DB and so it will never update the global maintenance status field. If you are sure that you are in global maintenance mode and you want to skip at all the check you can execute: engine-setup --otopi-environment=OVESETUP_CONFIG/continueSetupOnHEVM=bool:True > > > > > On Tue, Feb 5, 2019 at 1:28 PM Simone Tiraboschi <stirabos(a)redhat.com> > wrote: > >> >> >> On Tue, Feb 5, 2019 at 12:31 PM <mhumaj(a)gmail.com> wrote: >> >>> Hi, >>> >>> We run ovirt upgrade to 4.3, after upgrade we wanted to run engine-setup >>> but we do not know how to put this host which is simply another virtual >>> machine with ovirt-engine. hosted-engine is running on hosts. >>> >>> During execution engine service will be stopped (OK, Cancel) >>> [OK]: >>> [ ERROR ] It seems that you are running your engine inside of the >>> hosted-engine VM and are not in "Global Maintenance" mode. >>> In that case you should put the system into the "Global >>> Maintenance" mode before running engine-setup, or the hosted-engine HA >>> agent might kill the machine, which might corrupt your data. >>> >>> [ ERROR ] Failed to execute stage 'Setup validation': Hosted Engine >>> setup detected, but Global Maintenance is not set. >>> [ INFO ] Stage: Clean up >>> Log file is located at >>> /var/log/ovirt-engine/setup/ovirt-engine-setup-20190205121802-l7llrw.log >>> [ INFO ] Generating answer file >>> '/var/lib/ovirt-engine/setup/answers/20190205121855-setup.conf' >>> [ INFO ] Stage: Pre-termination >>> [ INFO ] Stage: Termination >>> [ ERROR ] Execution of setup failed >>> >>> from the hosted nodes >>> >>> --== Host 2 status ==-- >>> >>> Host ID : 2 >>> Engine status : {"reason": "vm not running on this >>> host", "health": "bad", "vm": "down", "detail": "unknown"} >>> Can anyone please tell me how to put the global maintenance on virtual >>> machine where the ovirt-engine is? not the hosts even if I put them on the >>> global maintenance I am unable to run engine-setup on vm with ovirt-enging. >>> >> >> Run this one one of your hosts: >> hosted-engine --set-maintenance --mode=global >> or from the webadmin UI, as you prefer. >> >> >>> >>> thanks >>> _______________________________________________ >>> Users mailing list -- users(a)ovirt.org >>> To unsubscribe send an email to users-leave(a)ovirt.org >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: >>> https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: >>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/3YJQVUDKVC2... >>> >>

6 years

1
0
0 / 0

4.3 rc2: info about shutdown of last host and networking page

by Gianluca Cecchi

Hello, env with single host HCI deployment from node ng iso After powering off VMs, put into global maintenance, shutdown hosted engine, I then run shutdown on host. This I think would simulate also a total shutdown scenario when you have the final step of shutdown of the final host. This is what I see in console about failure in several unmounts, both /var and /var/log and also gluster related filesystems Could there be any dependency problem? See here the screenshot: https://drive.google.com/file/d/1wqqXlmT66hHLJ8DMcwfPvDXJHkWm_ijE/view?us... Also I have not understood the networking page of host in Cockpit: https://drive.google.com/file/d/1isX4F8qPcFmTyhmCVnZadhp6NY0R9Sy7/view?us... in my scenario I was downloading a 1Gb image for the CentOS Atomic host from public glance repo. Questions: - how to explain the receiving box graph? What are the different color lines for? - In "receiving" column inside the "interfaces" sections I see all "0" for gluster one (eth1) and empty (no value) for ovirtmgmt (perhaps because it is unmanaged from host point of view?) Also, it seems to me that the temporary bridge for hosted engine deployment on 192.168.124.0 (virbr0) is still there even after finishing the deployment, even if with "no carrier"... is this expected? Better perhaps to undefine the network after deployment? Gianluca

6 years

3
2
0 / 0

Agentless Backup update: Trilio Vault...what a joke, pay $7500

by femi adegoke

Back in June of 2018, I posted regarding Agentless backup solutions. Greg Sheremeta replied & mentioned Trilio. The rest of the story...well just read on... These guys at Trilio have turned out to be a complete waste of time. (I could use some more colorful language) After my post & reply from Greg Sheremeta, I followed up with Trilio. A lot of promises/dates were made (by Trilio) as to when a beta would be made available for testing. Needless to say, they never came through. Finally in Dec 2018, they said we are ready for the demo, we will show you a working product. The day came, Trilio said, sorry it's too close to Xmas, we will postpone the demo's till 2019. In 2019, I continued to follow up & finally they set a date for another demo - Jan 29. On Jan. 29, we get on the Webex, they said, sorry the demo just broke 10 mins prior to our call, so no demo. They show me some screenshots & their OpenStack version & again promise to get me beta software in a few days. I continue to follow up (via email) Yesterday (Feb 6), I get an email from Thomas Lahive GM; Sales and Alliance Partners....(copied & pasted below): "We started RHV betas and decided to prioritize current Trilio customers (those that purchased Triliovault for Openstack). If you would like to be part of the beta now then We can sign you up as a certified Trilio reseller which has a $7,500 Starter Fee. The $7,500 will be credited against your first customer order that is at least $7,500 so it will eventually cost you nothing. Many of our partners can apply the fee against revenue so it's a great tax incentive, but you can confirm with your finance department. Please Lmk how you would like to proceed." Please remember, I have never seen a working demo of this product, never. Is this typical behavior of RH partners?

6 years

1
0
0 / 0

[Users] Moving iSCSI Master Data

by rni＠chef.net

--========GMXBoundary282021374122634158505 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Hi, it's me again.... I started my oVirt 'project' as a proof of concept,.. but it happend as always, it became production Now, I've to move the iSCSI Master data to the real iSCSI traget. Is there any way to do this, and to become rid of the old Master Data? Thank you for your help Hans-Joachim --========GMXBoundary282021374122634158505 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable <span style=3D'font-family:Verdana'><span style=3D'font-size:12px'>Hi,<br /= ><br />it's me again....<br /><br />I started my oVirt 'project' as a proof= of concept,.. but it happend as always, it became production <img alt= =3D" " title=3D" " src=3D"http://images.gmx.com/images/outsource/applicatio= n/mailclient/mailcom/resource/mailclient/icons/blue/emoticons/animated/S_02= -516742918.gif" /><br /><br />Now, I've to move the iSCSI Master data to th= e real iSCSI traget.<br />Is there any way to do this, and to become rid of= the old Master Data?<br /><br /><span id=3D"editor_signature">Thank you fo= r your help</span><br /><br />Hans-Joachim</span></span> --========GMXBoundary282021374122634158505--

6 years

3
2
0 / 0

Can't manually migrate VM's (4.3.0)

by Ron Jerome

I've been running 4.3.0 for a few weeks now and just discovered that I can't manually migrate VM's from the UI. I get an error message saying: "Could not fetch data needed for VM migrate operation" Sounds like https://bugzilla.redhat.com/show_bug.cgi?format=multiple&id=1670701 Ron.

6 years, 1 month

5
16
0 / 0

Changing Ovirt hosted engine memory

by Dionysis K

Hello! i am new user to ovirt and i was trying to increase the memory of the hosted engine from 5120 MB to 10240 MB and the reports on the events are those bellow, the environment the hosted engine runs is on 3 ovirt nodes with version 4.2.8 and the hosted engine is updates with the latest version, any ideas how to set up things Failed to hot set memory to VM HostedEngine. Underlying error message: unsupported configuration: Attaching memory device with size '5242880' would exceed domain's maxMemory config VDSM command SetAmountOfMemoryVDS failed: unsupported configuration: Attaching memory device with size '5242880' would exceed domain's maxMemory config

6 years, 1 month

2
2
0 / 0

Hosted Engine Storage migration

by joel+ovirt＠robisons.us

Hello listmembers! I'm in search of some steps to use to migrate my Hosted-Engine from one NFS storage domain to another different NFS storage domain. One of the possible ways to accomplish this task may already be a feature with oVirt 4.1, I'm using 4.2 https://lists.ovirt.org/pipermail/users/2017-January/078739.html (New feature in 4.1?) Will someone elaborate the steps to use this new feature and how I could use it to accomplish this task? the bug link in the email linked above has a comment (https://bugzilla.redhat.com/show_bug.cgi?id=1409112#c12) - does this mean I need to redeploy the hosted-engine? I'm not able to follow as I'm new to oVirt and still learning the ins and outs and design if I'm on the wrong path here please correct me. Thank you, -Joel

6 years, 1 month

2
3
0 / 0

Forum available

by Josep Manel Andrés Moscardó

Hi all, I am just wondering if anyone like me would like to have everything that is bump here in a forum, with all the benefits it brings (and people will still be able to subscribe and reply through email). Something like Discourse would be nice in my opinion. Best.

6 years, 1 month

10
22
0 / 0

Error creating a storage domain (On Cisco UCS Only)

by nico.kruger＠darkmatter.ae

Hi Guys, I am trying to install a new cluster... I currently have a 9 node and two 6 node oVirt Clusters... (these were installed on 4.1 and upgraded to 4.2) So i want to build a new cluster, which is working fine on this HP notebook i use for testing (using single node gluster deployment) But when i try install this on my production servers which are Cisco UCS servers i keep getting this error: [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[Error creating a storage domain]". HTTP response code is 400. [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Error creating a storage domain]\". HTTP response code is 400."} This happens during storage creation after the hosted-engine is built and after gluster has been deployed (error happens for both single and 3 replica deployments) I just cant see how an install on one type of server is successful but not on the UCS servers (which i am running my other ovirt clusters on) BTW i dont think the issue is related to Gluster Storage Create as i tried using NFS and Local storage and get the same error (on UCS server only) I am using the ovirt-node-ng-installer-4.2.0-2019011406.el7.iso install ISO Below is a tail from ovirt-hosted-engine-setup-ansible-create_storage_domain Log file 2019-01-27 11:09:49,754+0400 INFO ansible ok {'status': 'OK', 'ansible_task': u'Fetch Datacenter name', 'ansible_host': u'localhost', 'ansible_playbook': u'/usr/share/ovirt-hosted-engine-setup/ansible/create_storage_domain.yml', 'ansible_type': 'task'} 2019-01-27 11:09:49,754+0400 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9f9b7e2d50> kwargs 2019-01-27 11:09:50,478+0400 INFO ansible task start {'status': 'OK', 'ansible_task': u'Add NFS storage domain', 'ansible_playbook': u'/usr/share/ovirt-hosted-engine-setup/ansible/create_storage_domain.yml', 'ansible_type': 'task'} 2019-01-27 11:09:50,479+0400 DEBUG ansible on_any args TASK: Add NFS storage domain kwargs is_conditional:False 2019-01-27 11:09:51,151+0400 DEBUG var changed: host "localhost" var "otopi_storage_domain_details_nfs" type "<type 'dict'>" value: "{ "changed": false, "skip_reason": "Conditional result was False", "skipped": true }" 2019-01-27 11:09:51,151+0400 INFO ansible skipped {'status': 'SKIPPED', 'ansible_task': u'Add NFS storage domain', 'ansible_host': u'localhost', 'ansible_playbook': u'/usr/share/ovirt-hosted-engine-setup/ansible/create_storage_domain.yml', 'ansible_type': 'task'} 2019-01-27 11:09:51,151+0400 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9f9b7e2610> kwargs 2019-01-27 11:09:51,820+0400 INFO ansible task start {'status': 'OK', 'ansible_task': u'Add glusterfs storage domain', 'ansible_playbook': u'/usr/share/ovirt-hosted-engine-setup/ansible/create_storage_domain.yml', 'ansible_type': 'task'} 2019-01-27 11:09:51,821+0400 DEBUG ansible on_any args TASK: Add glusterfs storage domain kwargs is_conditional:False 2019-01-27 11:10:02,045+0400 DEBUG var changed: host "localhost" var "otopi_storage_domain_details_gluster" type "<type 'dict'>" value: "{ "changed": false, "exception": "Traceback (most recent call last):\n File \"/tmp/ansible_ovirt_storage_domain_payload_Xous24/__main__.py\", line 682, in main\n ret = storage_domains_module.create()\n File \"/tmp/ansible_ovirt_storage_domain_payload_Xous24/ansible_ovirt_storage_domain_payload.zip/ansible/module_utils/ovirt.py\", line 587, in create\n **kwargs\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py\", line 24225, in add\n return self._internal_add(storage_domain, headers, query, wait)\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 232, in _internal_add\n return future.wait() if wait else future\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 55, in wait\n return self._code(response)\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 229, in callback\n self._check_fault(response)\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 132, in _check_fault\n self._raise_error(response, body)\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 118, in _raise_error\n raise error\nError: Fault reason is \"Operation Failed\". Fault detail is \"[Error creating a storage domain]\". HTTP response code is 400.\n", "failed": true, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Error creating a storage domain]\". HTTP response code is 400." }" 2019-01-27 11:10:02,045+0400 DEBUG var changed: host "localhost" var "ansible_play_hosts" type "<type 'list'>" value: "[]" 2019-01-27 11:10:02,045+0400 DEBUG var changed: host "localhost" var "play_hosts" type "<type 'list'>" value: "[]" 2019-01-27 11:10:02,045+0400 DEBUG var changed: host "localhost" var "ansible_play_batch" type "<type 'list'>" value: "[]" 2019-01-27 11:10:02,046+0400 ERROR ansible failed {'status': 'FAILED', 'ansible_type': 'task', 'ansible_task': u'Add glusterfs storage domain', 'ansible_result': u'type: <type \'dict\'>\nstr: {\'_ansible_parsed\': True, u\'exception\': u\'Traceback (most recent call last):\\n File "/tmp/ansible_ovirt_storage_domain_payload_Xous24/__main__.py", line 682, in main\\n ret = storage_domains_module.create()\\n File "/tmp/ansible_ovirt_storage_domain_payload_Xous24/ansible_ovirt_storage_domain_pay', 'ansible_host': u'localhost', 'ansible_playbook': u'/usr/share/ovirt-hosted-engine-setup/ansible/create_storage_domain.yml'} 2019-01-27 11:10:02,046+0400 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f9f9b859f50> kwargs ignore_errors:None 2019-01-27 11:10:02,048+0400 INFO ansible stats {'status': 'FAILED', 'ansible_playbook_duration': 39.840701, 'ansible_result': u"type: <type 'dict'>\nstr: {u'localhost': {'unreachable': 0, 'skipped': 2, 'ok': 13, 'changed': 0, 'failures': 1}}", 'ansible_playbook': u'/usr/share/ovirt-hosted-engine-setup/ansible/create_storage_domain.yml', 'ansible_type': 'finish'} 2019-01-27 11:10:02,048+0400 DEBUG ansible on_any args <ansible.executor.stats.AggregateStats object at 0x7f9f9da59a50> kwargs This issue is driving me crazy... any assistance on what i can do would be greatly appreciated Nico

6 years, 1 month

5
8
0 / 0

qemu-img info showed iscsi/FC lun size 0

by jingjie.jiang＠oracle.com

Hi, Based on oVirt 4.3.0, I have data domain from FC lun, then I create new vm on the disk from FC data domain. After VM was created. According to qemu-img info, the disk size is 0. # qemu-img info /rhev/data-center/mnt/blockSD/eaa6f641-6b36-4c1d-bf99-6ba77df3156f/images/8d3b455b-1da4-49f3-ba57-8cda64aa9dc9/949fa315-3934-4038-85f2-08aec52c1e2b image: /rhev/data-center/mnt/blockSD/eaa6f641-6b36-4c1d-bf99-6ba77df3156f/images/8d3b455b-1da4-49f3-ba57-8cda64aa9dc9/949fa315-3934-4038-85f2-08aec52c1e2b file format: raw virtual size: 10G (10737418240 bytes) disk size: 0 I tried on iscsi and same result. Is the behaviour expected? Thanks, Jingjie

6 years, 1 month

3
6
0 / 0

oVirt Performance (Horrific)

by drew.rash＠gmail.com

Hi everybody, my coworker and I have some decent hardware that would make great single servers, and then we through in a 10gb switch with 2x10gbps cards in 4 boxes. We have 2 excellent boxes - super micro board (disabled speed step) with 14 core intel i9's 7940x's, 128 GB ram (3200), 1tb m.2 samsung 870 evo's, 1tb ssd samsung, 1 8TB WD Gold, 1 6TB WD gold. Then we have 2 boxes (1 with 8 core i7-9700k, 1 with 6 core i7-8700) 128GB ram in one, 64GB ram in the other all 3000MHz with the same 1tb ssd,6tb wd gold, 8tb wd gold drives as the other boxes and 10gbps cards. Our problem is performance. We used the slower boxes for KVM(libvirt) and FreeNAS at first which was great performance wise. Then we bought the new super micro boxes and converted to oVirt + Gluster and did some basic write test using dd writing zero's to files from 1GB up to 50GB and were happy with the numbers writing directly to the gluster. But then we stuck a windows VM on it and turned it on...I'll stop there..because turning it on stopped any performance testing. This thing blew goat cheese. It was so slow the oVirt guest agent doesn't even start along with MS SQL server engine sometimes and other errors. So naturally, we removed the gluster from the equation. We took one of the 8TB WD Gold drives, made it a linux NFS share and gave it to oVirt to put VM's on as an NFS Domain. Just a single drive. Migrated the disk with the fresh windows 10 installation to it configured as VirtIO-SCSI, and booted the vm with 16GB ram, 8:1:1 cpu's. To our surprise it still blew. Just ran a winsat disk -drive c: for example purposes and the spice viewer repeatedly freezing, had the resource monitor open watching the 10,000ms disk response times with results...results were I rebooted because the results disappeared I didn't run it as administrator. And opening a command prompt is painful, the disk is still in use The task manager has no words on it. Disk is writing like 1MBps. command prompt finally showed up and looked blank with the cursor offset with no words anywhere. So the reboot took .. Well turning off took 2 minutes. Booting took 6 minutes 30 seconds ish. Logging in: 1m+ So 9-10 minutes to reboot and log back in a fresh windows install. Then 2 minutes to open a command prompt, task manager and resource monitor. During the write test disk i/o on the vm was less than 8, from the graph looks like 6MBps. Network traffic is like 20Mbps average, cpu is near zero, a couple spikes up to 30MBps on the disk. I ran this same thing on my disk and it finished in <1m. Ran it on the vm...still running after 30 minutes. I'll wait for the results to post them here. Ok It's been 30 minutes and it's still writing. I don't see the writes in the resource monitor, windows is doing a bunch of random app updates or something with candy crush on a fresh install and, ok so I hit enter a bunch of times on the prompt and it moved down to a flush-seq...and now it shows up in the resource monitor doing something again...I just ran this on my pc and it finished in less than a minute... whatever it's doing it's almost running at 1MB/s I think something went wrong because it only shows like 2 minutes passing at any test and then a total of 37 minutes. And at no time did the windows resource graphs or any of the oVirt node system graphs show more than like 6MB/s and definitely not 50 or 1GBps... flat out lies here. C:\Windows\system32>winsat disk -drive c Windows System Assessment Tool > Running: Feature Enumeration '' > Run Time 00:00:00.00 > Running: Storage Assessment '-drive c -ran -read' > Run Time 00:00:12.95 > Running: Storage Assessment '-drive c -seq -read' > Run Time 00:00:20.59 > Running: Storage Assessment '-drive c -seq -write' > Run Time 00:02:04.56 > Run Time 00:02:04.56 > Running: Storage Assessment '-drive c -flush -seq' > Run Time 00:01:02.75 > Running: Storage Assessment '-drive c -flush -ran' > Run Time 00:01:50.20 > Dshow Video Encode Time 0.00000 s > Dshow Video Decode Time 0.00000 s > Media Foundation Decode Time 0.00000 s > Disk Random 16.0 Read 5.25 MB/s 5.1 > Disk Sequential 64.0 Read 1220.56 MB/s 8.6 > Disk Sequential 64.0 Write 53.61 MB/s 5.5 > Average Read Time with Sequential Writes 22.994 ms 1.9 > Latency: 95th Percentile 85.867 ms 1.9 > Latency: Maximum 325.666 ms 6.5 > Average Read Time with Random Writes 29.548 ms 1.9 > Total Run Time 00:37:35.55 I even ran it again and it had the exact same results. So I'll try copying a file from a 1gbps network location with an ssd to this pc. It's a 4GB CentOS7 ISO to the desktop. It said 20MB/s then up to 90MB/s...then it dropped after doing a couple gigs. 2.25 gigs to go and it's going at 2.7MB/s with some fluctuations up to 5MB. So to drive this home at the same time... I copied the file off the same server to another server with ssd disks and it ran at 100MB/s which is what I'd expect over a 1gbps network. All this said, we do have an ssd gluster 2+1 arbiter (which seemed fastest when we tested different variations) on the 1TB ssd's. I was able to do reads from the array inside a VM at 550MB/s which is expected for an ssd. We did dd writing zero's and got about 550MB/s also from the ovirt node. But inside a VM the best we get is around ~10MB/s writing. Basically done the same testing using windows server 2016, boot terrible, opening applications terrible. But with sql server running off the ssd gluster I can read at 550MB/s but writing is horrific somewhere around 2-10MB/s. Latency between the nodes with ping is 100us ish. The hardware should be able to do 200MB/s HDD's, 550MB/s SSD's but it doesn't. And it's evident in every writing scenario inside a vm. Migrating VM's is also at this speed. Gluster healing seems to run faster, we've seen it conusme 7-9 Gbps. So I feel this is an oVirt issue and not gluster. Especially since all the tests above are the same when using an NFS mount on the box running the VM in oVirt. Please guide me. I can post pictures and such if needed, logs whatever. Just ask.

6 years, 1 month

6
13
0 / 0

Suggestions on adding 1000 or more networks to an engine/hosts

by Brian Wilson

So we have a use case where our engines will will be hosting development sandbox clusters. We need to have upwards of 1000 networks on some of these. I understand there is no theoretical limit to the number of networks does any body have a good reliable way of instantiating all of these networks. We have been using ansible for POCs and doing 100 Networks have not had a problem getting them on there however when upping the number to many more it begins to take longer and longer between each one and eventually timed iout and only got to 1567 Example Task we are using for this: tasks: - name: Add More Networks ovirt_network: auth: "{{ ovirt_auth }}" data_center: "{{ pcloud_name }}" name: "{{ pcloud_name }}-{{ item }}" state: present label: uplink vlan_tag: "{{ item }}" clusters: - name: "{{ ovirt_cluster }}" assigned: yes required: no display: no migration: no gluster: no with_sequence: start=1551 end=2500 What are some better ways of bulk additions of networks? Would the API provide a better solution so as to sorta bulk cache them then initiate the save?

6 years, 1 month

5
10
0 / 0

Thank you for your reply.

by Afzzal Ahmed

Assaalamu Alaikkum my dear friend, I amMr Afzzal Ahmed, the chief operating officer with my bank and I want to informyou that an amount of US$37.3 million will be moved on your name as the ForeignBusiness Partner to our latedeceased customer Mr.Berry Bryan Floyd, I need yourhelp to receive this money as we shall share the money in the ratio of 60:40%.You will receive this amount through a bank wire transfer. Please send your full names, direct telephonenumbers, and home address, more details of how to claim the form will be givenupon your reply. You can reply me through my private e-mail ID : afzzallahmed(a)aol.com your quick response will be highly appreciated. Yours sincerely,Mr.Afzzal Ahmed

6 years, 1 month

2
1
0 / 0

[Users] Can't access RHEV-H aka ovirt-node

by Scotto Alberto

--_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: multipart/alternative; boundary="_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_" --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi all, I can't login to the hypervisor, neither as root nor as admin, neither from= another computer via ssh nor directly on the machine. I'm sure I remember the passwords. This is not the first time it happens: l= ast time I reinstalled the host. Everything worked ok for about 2 weeks, an= d then... What's going on? Is it a known behavior, somehow? Before rebooting the hypervisor, I would like to try something. RHEV Manage= r talks to RHEV-H without any problems. Can I login with RHEV-M's keys? how= ? Thank you all. Alberto Scotto [Blue] Via Cardinal Massaia, 83 10147 - Torino - ITALY phone: +39 011 29100 al.scotto(a)reply.it www.reply.it ________________________________ -- The information transmitted is intended for the person or entity to which i= t is addressed and may contain confidential and/or privileged material. Any= review, retransmission, dissemination or other use of, or taking of any ac= tion in reliance upon, this information by persons or entities other than t= he intended recipient is prohibited. If you received this in error, please = contact the sender and delete the material from any computer. --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <style>  </style> </head> <body lang=3D"IT" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> <p class=3D"MsoNormal"><span lang=3D"EN-US">Hi all,</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">I can’t login to the hype= rvisor, neither as root nor as admin, neither from another computer via ssh= nor directly on the machine.</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">I’m sure I remember the p= asswords. This is not the first time it happens: last time I reinstalled th= e host. Everything worked ok for about 2 weeks, and then...</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">What’s going on? Is it a = known behavior, somehow?</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">Before rebooting the hypervisor= , I would like to try something. RHEV Manager talks to RHEV-H without any p= roblems. Can I login with RHEV-M’s keys? how?</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US"> </span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">Thank you all.</span></p> </div> <br> <br> <div align=3D"left"> <p style=3D"font-family:Calibri,Sans-Serif; font-size:10pt"><span style=3D"= color:#000000; font-weight:bold">Alberto Scotto</span> <span style=3D"color:#808080"></span><br> <br> <span style=3D"color:#000000"><img border=3D"0" alt=3D"Blue" src=3D"cid:bde= 5ac62d10545908e269a6006dbd5ac" style=3D"margin:0px"> </span><br> <span style=3D"color:#808080">Via Cardinal Massaia, 83<br> 10147 - Torino - ITALY <br> phone: +39 011 29100 <br> <a href=3D"al.scotto(a)reply.it" target=3D"" style=3D"color:blue; text-decora= tion:underline">al.scotto(a)reply.it</a> <br> <a title=3D"" href=3D"www.reply.it" target=3D"" style=3D"color:blue; text-d= ecoration:underline">www.reply.it</a> </span><br>  </p> </div> <br> <hr> <font face=3D"Arial" color=3D"Gray" size=3D"1"><br> --<br> The information transmitted is intended for the person or entity to which i= t is addressed and may contain confidential and/or privileged material. Any= review, retransmission, dissemination or other use of, or taking of any ac= tion in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If= you received this in error, please contact the sender and delete the mater= ial from any computer.<br> </font> </body> </html> --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_-- --_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: image/png; name="blue.png" Content-Description: blue.png Content-Disposition: inline; filename="blue.png"; size=2834; creation-date="Tue, 11 Sep 2012 14:14:44 GMT"; modification-date="Tue, 11 Sep 2012 14:14:44 GMT" Content-ID: <bde5ac62d10545908e269a6006dbd5ac> Content-Transfer-Encoding: base64 iVBORw0KGgoAAAANSUhEUgAAAIwAAAAyCAYAAACOADM7AAAABmJLR0QA/gD+AP7rGNSCAAAACXBI WXMAAA3XAAAN1wFCKJt4AAAACXZwQWcAAACMAAAAMgCR0D3bAAAKaUlEQVR42u2ce5AUxRnAf313 3Al4eCAYFaIgyMNEUF6KlYoVIDBArDxqopWxQgViQlWsPHA0MUlZVoyKRsdSE4lGomjIaHS0UlHL wTIPpEgQFQUUjYIWdfIIScyBHi/Z6/zRM1xP3yzs7t3unOX8qra2H9M9vb3f9Pf19/WukFKSk1Mq dVkPIOejRS4wOWXR6wVGuP5I4foDsh5HjkL0VhtGuP5A4CFgNrAD+Lb0nKeyHtfHnd68wixGCQvA qcA9wvWPy3pQH3caan1D4fonAYeBDwEZjaFflAaok56zHRhsNG0B+gAHSrhHarn0nFp/3NLnxbKP B06I5kECO2UYZD2sLtRcYIBJwK+BoYBACU89cAjoAIRw/TuAJcClQGy//FJ6zvvH6ly4/qXAz4vU HQA2A4H0nIcz+OxH41eAHaU3AhdkPaA0MrFhhOuPB2YA5wBnA6ehni5dgKcBu4C5wLZS7Rfh+g8A 80u49HHgEuk5h2s+AeaYLbsO2AKMiIqWyzBYkPW40shihUF6zkbUUwSAcP0G4FHgS9pl10rPmQMs LbXfSBVNLPHyrwDfBO7JYg4MRqEempjnsh5QMXqL0Xsl8EUt3w5cXUE/w4AztfzzwGSUGrwoyuvM yfqDR5yLUssxL2U9oGJkssLoCNdfjLJXdBZIz9lQQXcTgSYt/4z0nHjy1wvX3wW8oNX3O8q4TgKm AGegjNB/As9JzzmYer1lTwKGoOyyV2UYtArLngLMQ9lh64EVRQxZ3V5pje4V9zsVGBRl22QYrDXu e0HUvwD+K8NgXbe/lKOQqcAI178MuM0ovk16zqMVdjnNyL9g5E2DrTVlTP1RRvM3gIFG9RvC9RdK z/lHoo2yQQJgeFR0hbDsT6FUns544Icp456qpV+RYaAL5RJgepR+FWXzxfcdA6zRrr0SqKrAZKaS hOt/DbjXKH5Geo7bjW71iT8AvGLUzzXyfzfGNBBlPyymq7AAjAWeFK5/slE+AvhklC4At6KEZb9x 3cJo+9x5T8s+ERinFa012uzU0vuMuu9r6W3AXd2Yu5LIRGCE618E/D6l6rpu9Hk8MEEr2iQ9p1Wr n4wShJgPgCeMbh6g02jeB9wILASe1q4ZBHzBaDeRThukHghRdskoQF+NmlH+JJ0JqB1ijCkw72np jiOfx7JPQrkdYm6QYXBMH1V3qYlKEq7fhNLvw1CTeztK55rcJlz/s8XshGPwaeBELd8sXP961Bd4 Bsqo1u2bm6Tn7NbGeCHKMI6ZLz3nsajuT6gtfjxfpxr31lXhThkG8470a9mrtPp2uq4652np94FN Rr0uMM1a+jI6fVTvAMsrmLOy6VGBEa5fB3wOpctHaK9TgVOAxmN0MRXlwPpWBbefYuTHAj8tcu39 0nNuMMq+qqXfjoUl4mSSq/HbRlv9S3/ZqBumpXcB/zPqz9fSm2UY/Nuo1wWmCUBYdiPwHa3ck2Hw YQVzVjbVWGFmkW7YmewDfga8CNwHnB6VXyZcf7X0nAfLvG8pntE3gSXSc5an1Olf+hDh+i+jVieJ UiOxwBSiMQMgLLsFOEtr+7xWB8rQjdkgw0BXK40o1RWTZrDu0dKx0X4xylMOynZZVuZcVUyPCoz0 nA7gR8L1N6FWmQIqZtRGpwoSwF7gRek5WwCE658P3A9Y0TV3C9ffUOrWOlrZdIfdXuBhlCqaqZU/ myYs0RZaNzybUV7oNFqBt7T8BJJ2iW6zDAPGFKkDGE1yBTLtF0gKTCF6/4FWtsTYVVWVqtgw0nNW lHn9LmCOcP2bgKuAvsAtqNWqFGLVF7NGes4i4fpjgNfpFNbzi7QfD/TX8vtQMa40VkvPKWh5fWfW DuhCfg5Ju8nc5k/RxpZYuTR0gWkTlj0D5YgEeJca2S4xvcXTC4D0nKvpdNWXc2hqEiqSHROrhR0k bYAzhesPTmmvG61tKAE6PXoNRRnTg6OX6VvRhfB1GQa7tbyu5v6D8qNQpH4bsDVlbLrADACu0fK/ qOXqAr1MYCLip7AcI+48I78WIIpuv6mVN5NUPWntN0nP2So9p016ThtwEKU6RpIMOyAsuw9JVWiu INO19AYZBma0fbKWXi/DoEBX9tBpu4wDLozS2+jqx6o6vVFgYt+JKKON/pTvJ6kWzKc6LTg5XEtv MeruAF5DqbZVgH6IayTJoOHf4oSw7LNICuKTeqfCsj9BUnhN+yamPXqZc3JrLfwuJpnHklKIBaa+ lIuF67eQ3KW8HtlEMabhPCmlG/3JnhX5ZHaifDeLtLqlxpmcySQfuvnCstdH6WXaZ9iPMsJ1xpOM ZaXZL6DsqfcB3UO8A7WzrDm9T2DqG7dTOHSIEgUGIc5GyhatZJ1Rv4HkmZ/xKb08o5UPRa0UkuQT vY6uQVJTFc5D7fQ6SNpUN8ow2GVcq7sB2ugq2DGHUYfLdG6SYbCPDMhcYIRlJwWjcGg/Z1/yATBE zJxXT0Pf4o0P7pWcO39W4nuVHS+JGfPq6dMXOjpgzNyt9En0MUF877fDee3x1iPlo2beTOPxnwGh qzahuhUAjwCLpOeYKkDfIT2BUl1XkxT2+2QYXJ8yen0H+JYMgz2kY9o126mh38UkITBRYGwp5e1Q usNjwL/Ql3VRX2D35mUI0UB90wyOZmc19i+wa+NB+vTrnMA9re00RO3q6iRbVtYxeOzt1NXHS3od e96dRkPT6CN9v/HUIRr738Dg0bMRDSdQVzeAjsJh+ra8SfMpf5S3XNzFoSYsewhJVbhKhoEnLDtE HV4vRGXPprQFFTdrRklk2u4opoVkyMOTYbCfjEgc0RSWPQhlQ/SruMfymCrD4IXud1N7In+ILgzT ZRj8tYfvcSLwOzoPer0DjKv1VlrHVEltqBhMafZD99mR1QfvAXT1tYfiNkhZCMvuD1yLCtbORsXg Yi7PUljAEJgoztFaYV8fN8yg4XsV95TkLJS32+QaGQZPl9tZT5O50ftRJLL1Pq8V9cjqEjHdyG8D rpdhkJmhq5MLTGX0QR2diLdnYQ/2vRq1wsRe6nUyDNq712XP0Wt/W53TO+mNoYGcXkwuMDll0eM2 TPRbnGnAvaaDSVj2bOA0GQY1j7Lm9AzVWGG+jIrwphlH3wXuzvpD51RONXZJ7aizLFcIyx4O3CXD IN527kUdJAJAWPbFqBXnVmHZV6FO3K+I6oahzgYPAX7T017UnMqoxgpTQAniONRJ/AeFZRc72+IA P47SPwEWAAjLbgL+jPJ1NAF/EZZd6o/sc6pINQSmARAyDL6OOm45mmSoX+cDVDiC6D0+azI0arcS FSkG9fcgORlTbcfdXtR5jqOdnpPGO3QK8nzU33KsoutvgXIyoBorjP7FN6OEsph3sE6rq9fS8RmQ RTIMTgP+QPJsbk5GVENgjgMQlv0QcDnwBp0nxgaQ/O+6dmCUsOxHUGdj459kbI/a3Sksew3qjE5L 1pOVUx2VtBJljxxAhf3v0v4TZRnKmI25ObruLdTZkvcAZBgcEpY9E3BRu6TrZBisznqycvJYUk6Z 5KGBnLLIBSanLHKBySmLXGByyiIXmJyy+D/P9uGVPOu6DAAAACh6VFh0U29mdHdhcmUAAHja801M LsrPTU3JTFRwyyxKLc8vyi5WsAAAYBUIJ4KDNosAAAAASUVORK5CYII= --_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_--

6 years, 1 month

3
2
0 / 0

Ovirt Node 4.3 Gluster Install adding bricks

by pollard＠tx.net

Sorry if this seems simple, but trial and error is how I learn. So the basics. I installed Node 4.3 on 3 hosts, and was following the setup for self-hosted engine. The setup fails when detecting peers and indicates that they are already part of a cluster. So i restart the install and choose the install engine on single node with Gluster. I now have all three nodes connected to ovirt engine, however my trouble is I am not understanding how to add the disk of the two nodes to the glusterFS. I also have some extra disks on my primary node I want to add. I believe it is as follows but I dont want to mess this up. Under Compute >> Hosts >> $HOSTNAME Select Storage Devices Select Disk in my case sde Then create brick? If this is the case Do I add it to a LV if so which one engine,data or vmstore? Do I repeat this for each hosts? I can duplicate the engine, data and vmstore on each one, but that will still leave me with two disks on each node without assignment If anyone can help that would be great. Thank you. Pollard

6 years, 1 month

2
2
0 / 0

Unable to make Single Sign on working on Windows 7 Guest

by Felipe Herrera Martinez

On the case I'll be able to create an installer, what is the name of the Application need to be there, in order to ovirt detects that Ovirt Guest agent is installed? I have created an installer adding OvirtGuestService files and the Product Name to be shown, a part of the command line post installs.. I have tried with "ovirt-guest-agent" and "Ovirt guest agent" Names for the application installed on Windows 7 guest and even both are presented on ovirt VM Applications tab, on any case LogonVDScommand appears. There is other option to make it work now? Thanks in advance, Felipe

6 years, 1 month

3
5
0 / 0

Re: [ovirt-users] Need VM run once api

by Chandrahasa S

This is a multipart message in MIME format. --=_alternative 00199D2865257E91_= Content-Type: text/plain; charset="US-ASCII" Can any one help on this. Thanks & Regards Chandrahasa S From: Chandrahasa S/MUM/TCS To: users(a)ovirt.org Date: 28-07-2015 15:20 Subject: Need VM run once api Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00199D2865257E91_= Content-Type: text/html; charset="US-ASCII" <font size=2 face="sans-serif">Can any one help on this.</font> <br> <br><font size=2 face="sans-serif">Thanks & Regards<br> Chandrahasa S<br> </font> <br> <br> <br> <br><font size=1 color=#5f5f5f face="sans-serif">From:        </font><font size=1 face="sans-serif">Chandrahasa S/MUM/TCS</font> <br><font size=1 color=#5f5f5f face="sans-serif">To:        </font><font size=1 face="sans-serif">users(a)ovirt.org</font> <br><font size=1 color=#5f5f5f face="sans-serif">Date:        </font><font size=1 face="sans-serif">28-07-2015 15:20</font> <br><font size=1 color=#5f5f5f face="sans-serif">Subject:        </font><font size=1 face="sans-serif">Need VM run once api</font> <br> <hr noshade> <br> <br><font size=2 face="sans-serif">Hi Experts,</font> <br> <br><font size=2 face="sans-serif">We are integrating ovirt with our internal cloud.</font> <br> <br><font size=2 face="sans-serif">Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS.</font> <br> <br><font size=2 face="sans-serif">but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal.</font> <br> <br><font size=2 face="sans-serif">I believe we need to power ON vm using run once API, but we are not able get this API.</font> <br> <br><font size=2 face="sans-serif">Can some one help on this.</font> <br> <br><font size=2 face="sans-serif">I got reply on this query last time but unfortunately mail got deleted.</font> <br> <br><font size=2 face="sans-serif">Thanks & Regards<br> Chandrahasa S<br> </font> <br><p>=====-----=====-----=====<br> Notice: The information contained in this e-mail<br> message and/or attachments to it may contain <br> confidential or privileged information. If you are <br> not the intended recipient, any dissemination, use, <br> review, distribution, printing or copying of the <br> information contained in this e-mail message <br> and/or attachments to it are strictly prohibited. If <br> you have received this communication in error, <br> please notify us by reply e-mail or telephone and <br> immediately and permanently delete the message <br> and any attachments. Thank you</p> <p></p> --=_alternative 00199D2865257E91_=--

6 years, 1 month

3
3
0 / 0

Re: [ovirt-users] Problem Windows guests start in pause

by Dafna Ron

Hi Lucas, Please send mails to the list next time. can you please do rpm -qa |grep qemu. also, can you try a different windows image? Thanks, Dafna On 07/14/2014 02:03 PM, lucas castro wrote: > On the host there I've tried to run the vm, I use a centOS 6.5 > and checked, no update for qemu, libvirt or related package. -- Dafna Ron

6 years, 1 month

3
3
0 / 0

Failed to deploy ovirt engine with "hosted-engine --deploy"

by Bong Shau Fui

Hi: I'm new to ovirt. I followed the guide at the page https://www.ovirt.org/documentation/self-hosted/chap-Deploying_Self-Hoste..., started to run "hosted-engine --deploy". It got stuck at the stage TASK [Get local VM IP] for about 5 minutes, and failed. Did a search but came out with nothing. From the log files these 2 lines are shown: 2018-07-25 19:59:11,269+0800 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:94 {u'_ansible_parsed': True, u'stderr_lines': [], u'cmd': u"virsh -r net-dhcp-leases default | grep -i 00:16:3e:5e:43:32 | awk '{ print $5 }' | cut -f1 -d'/'", u'end': u'2018-07-25 19:59:11.081420', u'_ansible_no_log': False, u'stdout': u'', u'changed': True, u'invocation': {u'module_args': {u'warn': True, u'executable': None, u'_uses_shell': True, u'_raw_params': u"virsh -r net-dhcp-leases default | grep -i 00:16:3e:5e:43:32 | awk '{ print $5 }' | cut -f1 -d'/'", u'removes': None, u'argv': None, u'creates': None, u'chdir': None, u'stdin': None}}, u'start': u'2018-07-25 19:59:10.949464', u'attempts': 50, u'stderr': u'', u'rc': 0, u'delta': u'0:00:00.131956', u'stdout_lines': []} 2018-07-25 19:59:11,370+0800 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:98 fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:5e:43:32 | awk '{ print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.131956", "end": "2018-07-25 19:59:11.081420", "rc": 0, "start": "2018-07-25 19:59:10.949464", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} Can someone please enlighten me on what has happened? Many thanks in advance. regards, Bong SF

6 years, 1 month

5
14
0 / 0

Re: Windows 10 - Ovirt 4.3 - EPYC

by Dominik Holler

On Fri, 1 Feb 2019 17:37:30 -0500 Darin Schmidt <darinschmidt(a)gmail.com> wrote: > [root@ovirt ~]# rpm -qa kernel > kernel-3.10.0-957.1.3.el7.x86_64 > kernel-3.10.0-862.el7.x86_64 > [root@ovirt ~]# uname -a > Linux ovirt 3.10.0-957.1.3.el7.x86_64 #1 SMP Thu Nov 29 14:49:43 UTC 2018 https://bugzilla.redhat.com/1638835 looks like there is at least kernel 3.10.0-957.3.1.el7.x86_64 required. Can you please check if upgrading to kernel solves the issue for you? I expectect at least kernel 3.10.0-957.5.1 to be availible. > x86_64 x86_64 x86_64 GNU/Linux > [root@ovirt ~]# rpm -qa qemu-kvm-ev > qemu-kvm-ev-2.12.0-18.el7_6.3.1.x86_64 > [root@ovirt ~]# rpm -qa libvirt > libvirt-4.5.0-10.el7_6.3.x86_64 > here is the vdsm > contains: Hyper-V SynIC is not supported by kernel > On Fri, Feb 1, 2019 at 3:05 PM Dominik Holler <dholler(a)redhat.com> > wrote: > > > On Fri, 1 Feb 2019 11:48:51 -0500 > > Darin Schmidt <darinschmidt(a)gmail.com> wrote: > > > > > I have successfully setup a centos vm, its up and running. Now I > > > need to setup a windows 10 VM and I cant seem to get anything to > > > work. > > > > > > Ive tried setting the OS type to other or Windows 10 64bit. With > > > Windows 64bit, it fails to startup at all.... When I select > > > OtherOS it will allow me to start to run the Windows ISO, but > > > then fails after a few seconds as well. Is there something I'm > > > not correctly configuring? > > > > Would you please share vdsm.log, and the output of > > rpm -qa kernel > > uname -a > > rpm -qa qemu-kvm-ev > > rpm -qa libvirt > > from of the host, and the relevant part of engine.log? > >

6 years, 1 month

3
9
0 / 0

Infiniband Usage / Support

by Andrey Rusakov

Hi, I got a config with IB Storage (IPoIB). I would like to extend IB usage to OVN network, but trying to do this i find some problems ... Problem #1 (IPoIB Storage Network) I configure IPoIB Before adding to oVirt cluster (I did it using Cockpit) Create [Bond], assign IP, change MTU. At this moment of time everything is fine... But - I am not able to assign IP/MTU using oVirt Cluster. And I can't perform any changes using Cockpit as IB interfaces are "Unmanaged Interfaces". Problem #1.1 It will be great to avoid users adding IPoIB networks using brctl, as it will not work... Problem #2 What is correct way to move OVN to IPoIB network?

6 years, 1 month

1
2
0 / 0

Please don't remove instance type

by Baptiste Agasse

Hi all, We are happy oVirt users for some years now (we started with 3.6, now on 4.2) and we manage most of our virtualization stacks with it. To provision and manage our machines, we use the foreman (for bare metal and virtual machines) on top of it. I made some little contributions to the foreman and other underlying stuff to have a deeper integration with oVirt, like to be able to select instance type directly from foreman interface/api and we rely on it. We use instance types to standardize our vms by defining system resources (memory, cpu and cpu topology) console type, boot options. On top of that we plan to use templates to apply OS (CentOS 7 and CentOS 6 actually). Having resources definitions separated from OS installation help us to keep instance types and templates lists small and don't bother users about some technical underlying stuff. As we are interested in automating oVirt maintenance tasks and configuration with ansible, I asked at FOSDEM oVirt booth if there is any ansible module to manage instance types in Ovirt as I didn't find it in ovirt ansible infra repo. The person to whom I asked the question said that you are planning to remove instance types from ovirt, and this make me sad :(. So here I am to ask why do you plan to remove instance types from oVirt. As far as I know, it's fairly common to have "instance types" / "flavors" / "sizes" on one side and then templates (bare OS, preinstalled appliances...) on other side and pick one of each to make an instance. If this first part is missing in future version of ovirt, it will be a pain point for us. So, my question is, do you really plan to remove instances type definitely ? Cheers. -- Baptiste

6 years, 1 month

3
4
0 / 0

Quota Actual Consumption

by Andrey Rusakov

Hi, Is it possible to configure oVirt to work Quota with actual vCPU Consumption. Currently i got 1 VM with 2 vCPU and 8Gb. In VM stats - 0% of CPU in use 0% of RAM in Use (it is fresh Linux instalaltion) In Quota consumption i can see 40% of CPU (vCPU quota = 5) 27% of RAM (Memory quota 30Gb) Is it possible to adjust Quata management to work with Actual workload, instead of VM Configuration? P.S. Seems like it is working for Storage, as i can see 0% Consumption in Quota (1Gb of thick disk with 20Gb Max and 200Gb in Quota)

6 years, 1 month

1
1
0 / 0

Cannot start VM: Bad volume specification

by Alan G

Hi, I performed the following: - 1. Shutdown VM. 2. Take a snapshot 3. Create a clone from snapshot. 4. Start the clone. Clone starts fine. 5. Attempt to delete snapshot from original VM, fails. 6. Attempt to start original VM, fails with "Bad volume specification". This was logged in VDSM during the snapshot deletion attempt. 2019-02-26 13:27:10,907+0000 ERROR (tasks/3) [storage.TaskManager.Task] (Task='67577e64-f29d-4c47-a38f-e54b905cae03') Unexpected error (task:872) Traceback (most recent call last): File "/usr/share/vdsm/storage/task.py", line 879, in _run return fn(*args, **kargs) File "/usr/share/vdsm/storage/task.py", line 333, in run return self.cmd(*self.argslist, **self.argsdict) File "/usr/lib/python2.7/site-packages/vdsm/storage/securable.py", line 79, in wrapper return method(self, *args, **kwargs) File "/usr/share/vdsm/storage/sp.py", line 1892, in finalizeMerge merge.finalize(subchainInfo) File "/usr/share/vdsm/storage/merge.py", line 271, in finalize optimal_size = subchain.base_vol.optimal_size() File "/usr/share/vdsm/storage/blockVolume.py", line 440, in optimal_size check = qemuimg.check(self.getVolumePath(), qemuimg.FORMAT.QCOW2) File "/usr/lib/python2.7/site-packages/vdsm/qemuimg.py", line 157, in check out = _run_cmd(cmd) File "/usr/lib/python2.7/site-packages/vdsm/qemuimg.py", line 426, in _run_cmd raise QImgError(cmd, rc, out, err) QImgError: cmd=['/usr/bin/qemu-img', 'check', '--output', 'json', '-f', 'qcow2', '/rhev/data-center/mnt/blockSD/024109d5-ea84-47ed-87e5-1c8681fdd177/images/f7dea7bd-04 6c-4923-b5a5-d0c1201607fc/ac540314-989d-42c2-9e7e-3907eedbe27f'], ecode=3, stdout={ "image-end-offset": 52210892800, "total-clusters": 1638400, "check-errors": 0, "leaks": 323, "leaks-fixed": 0, "allocated-clusters": 795890, "filename": "/rhev/data-center/mnt/blockSD/024109d5-ea84-47ed-87e5-1c8681fdd177/images/f7dea7bd-046c-4923-b5a5-d0c1201607fc/ac540314-989d-42c2-9e7e-3907eedbe27f", "format": "qcow2", "fragmented-clusters": 692941 } , stderr=Leaked cluster 81919 refcount=1 reference=0 Leaked cluster 81920 refcount=1 reference=0 Leaked cluster 81921 refcount=1 reference=0 etc.. Is there any way to fix these leaked clusters? Running oVirt 4.1.9 with FC block storage. Thanks, Alan

6 years, 1 month

4
12
0 / 0

Cannot assign Network to Mellanox Interface

by cbop.mail＠gmail.com

Hello, I want to use my Infiniband Network for Storage Access, so I created a new network and tried to assign it to a host. When I do this, I get a success message but it's actually not assigned to my Infiniband NIC. I'm running the latest CentOS with the latest Mellanox OFED drivers and multiple Subnet Managers are running on the network. The NIC is a Mellanox ConnectX-2 VPI, set to Infiniband mode. I didnt't knew which logs to send, so when you need to look into a log, just tell me which one you need. I hope you can help me out. Roman Meusch

6 years, 1 month

4
8
1 / 0

Re: Cannot Increase Hosted Engine VM Memory

by Douglas Duckworth

Ok sounds good. I will upgrade then hope this goes away. On Thu, Jan 31, 2019, 12:09 PM Simone Tiraboschi <stirabos(a)redhat.com<mailto:stirabos@redhat.com> wrote: On Thu, Jan 31, 2019 at 4:20 PM Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: Hi Simone Thanks again for your help! Do you have some ideas on what I can try to resolve this issue? Honestly I'm not able to reproduce this issue. I can only suggest to try upgrading to 4.2.8 if still not there, and if still not working open a bug on bugzilla attaching engine.log. Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Fri, Jan 25, 2019 at 3:15 PM Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: Yes, I do. Gold crown indeed. It's the "HostedEngine" as seen attached! Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Wed, Jan 23, 2019 at 12:02 PM Simone Tiraboschi <stirabos(a)redhat.com<mailto:stirabos@redhat.com>> wrote: On Wed, Jan 23, 2019 at 5:51 PM Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: Hi Simone Can I get help with this issue? Still cannot increase memory for Hosted Engine. From the logs it seams that the engine is trying to hotplug memory to the engine VM which is something it should not happen. The engine should simply update engine VM configuration in the OVF_STORE and require a reboot of the engine VM. Quick question, in the VM panel do you see a gold crown symbol on the Engine VM? Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Thu, Jan 17, 2019 at 8:08 AM Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: Sure, they're attached. In "first attempt" the error seems to be: 2019-01-17 07:49:24,795-05 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-29) [680f82b3-7612-4d91-afdc-43937aa298a2] EVENT_ID: FAILED_HOT_SET_MEMORY_NOT_DIVIDABLE(2,048), Failed to hot plug memory to VM HostedEngine. Amount of added memory (4000MiB) is not dividable by 256MiB. Followed by: 2019-01-17 07:49:24,814-05 WARN [org.ovirt.engine.core.bll.UpdateRngDeviceCommand] (default task-29) [26f5f3ed] Validation of action 'UpdateRngDevice' failed for user admin@internal-authz. Reasons: ACTION_TYPE_FAILED_VM_IS_RUNNING 2019-01-17 07:49:24,815-05 ERROR [org.ovirt.engine.core.bll.UpdateVmCommand] (default task-29) [26f5f3ed] Updating RNG device of VM HostedEngine (adf14389-1563-4b1a-9af6-4b40370a825b) failed. Old RNG device = VmRngDevice:{id='VmDeviceId:{deviceId='6435b2b5-163c-4f0c-934e-7994da60dc89', vmId='adf14389-1563-4b1a-9af6-4b40370a825b'}', device='virtio', type='RNG', specParams='[source=urandom]', address='', managed='true', plugged='true', readOnly='false', deviceAlias='', customProperties='null', snapshotId='null', logicalName='null', hostDevice='null'}. New RNG device = VmRngDevice:{id='VmDeviceId:{deviceId='6435b2b5-163c-4f0c-934e-7994da60dc89', vmId='adf14389-1563-4b1a-9af6-4b40370a825b'}', device='virtio', type='RNG', specParams='[source=urandom]', address='', managed='true', plugged='true', readOnly='false', deviceAlias='', customProperties='null', snapshotId='null', logicalName='null', hostDevice='null'}. In "second attempt" I used values that are dividable by 256 MiB so that's no longer present. Though same error: 2019-01-17 07:56:59,795-05 INFO [org.ovirt.engine.core.vdsbroker.SetAmountOfMemoryVDSCommand] (default task-22) [7059a48f] START, SetAmountOfMemoryVDSCommand(HostName = ovirt-hv1.med.cornell.edu<http://ovirt-hv1.med.cornell.edu>, Params:{hostId='cdd5ffda-95c7-4ffa-ae40-be66f1d15c30', vmId='adf14389-1563-4b1a-9af6-4b40370a825b', memoryDevice='VmDevice:{id='VmDeviceId:{deviceId='7f7d97cc-c273-4033-af53-bc9033ea3abe', vmId='adf14389-1563-4b1a-9af6-4b40370a825b'}', device='memory', type='MEMORY', specParams='[node=0, size=2048]', address='', managed='true', plugged='true', readOnly='false', deviceAlias='', customProperties='null', snapshotId='null', logicalName='null', hostDevice='null'}', minAllocatedMem='6144'}), log id: 50873daa 2019-01-17 07:56:59,855-05 INFO [org.ovirt.engine.core.vdsbroker.SetAmountOfMemoryVDSCommand] (default task-22) [7059a48f] FINISH, SetAmountOfMemoryVDSCommand, log id: 50873daa 2019-01-17 07:56:59,862-05 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-22) [7059a48f] EVENT_ID: HOT_SET_MEMORY(2,039), Hotset memory: changed the amount of memory on VM HostedEngine from 4096 to 4096 2019-01-17 07:56:59,881-05 WARN [org.ovirt.engine.core.bll.UpdateRngDeviceCommand] (default task-22) [28fd4c82] Validation of action 'UpdateRngDevice' failed for user admin@internal-authz. Reasons: ACTION_TYPE_FAILED_VM_IS_RUNNING 2019-01-17 07:56:59,882-05 ERROR [org.ovirt.engine.core.bll.UpdateVmCommand] (default task-22) [28fd4c82] Updating RNG device of VM HostedEngine (adf14389-1563-4b1a-9af6-4b40370a825b) failed. Old RNG device = VmRngDevice:{id='VmDeviceId:{deviceId='6435b2b5-163c-4f0c-934e-7994da60dc89', vmId='adf14389-1563-4b1a-9af6-4b40370a825b'}', device='virtio', type='RNG', specParams='[source=urandom]', address='', managed='true', plugged='true', readOnly='false', deviceAlias='', customProperties='null', snapshotId='null', logicalName='null', hostDevice='null'}. New RNG device = VmRngDevice:{id='VmDeviceId:{deviceId='6435b2b5-163c-4f0c-934e-7994da60dc89', vmId='adf14389-1563-4b1a-9af6-4b40370a825b'}', device='virtio', type='RNG', specParams='[source=urandom]', address='', managed='true', plugged='true', readOnly='false', deviceAlias='', customProperties='null', snapshotId='null', logicalName='null', hostDevice='null'}. This message repeats throughout engine.log: 2019-01-17 07:55:43,270-05 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-89) [] EVENT_ID: VM_MEMORY_UNDER_GUARANTEED_VALUE(148), VM HostedEngine on host ovirt-hv1.med.cornell.edu<http://ovirt-hv1.med.cornell.edu> was guaranteed 8192 MB but currently has 4224 MB As you can see attached the host has plenty of memory. Thank you Simone! Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Thu, Jan 17, 2019 at 5:09 AM Simone Tiraboschi <stirabos(a)redhat.com<mailto:stirabos@redhat.com>> wrote: On Wed, Jan 16, 2019 at 8:22 PM Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: Sorry for accidental send. Anyway I try to increase physical memory however it won't go above 4096MB. The hypervisor has 64GB. Do I need to modify this value with Hosted Engine offline? No, it's not required. Can you please attach your engine.log for the relevant time frame? Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 On Wed, Jan 16, 2019 at 1:58 PM Douglas Duckworth <dod2014(a)med.cornell.edu<mailto:dod2014@med.cornell.edu>> wrote: Hello I am trying to increase Hosted Engine physical memory above 4GB Thanks, Douglas Duckworth, MSc, LFCS HPC System Administrator Scientific Computing Unit<https://scu.med.cornell.edu> Weill Cornell Medicine 1300 York Avenue New York, NY 10065 E: doug(a)med.cornell.edu<mailto:doug@med.cornell.edu> O: 212-746-6305 F: 212-746-8690 _______________________________________________ Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave(a)ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_site_p...> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_commun...> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGSXQVVPJJ2...<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.ovirt.org_arch...>

6 years, 1 month

1
1
0 / 0

Re: oVirt Performance (Horrific)

by Strahil

Can you try setting the viodiskcache custom property to write back ? Best Regards, Strahil

6 years, 1 month

3
2
0 / 0

Ovirt 4.3 RC missing glusterfs-gnfs

by Strahil

6 years, 1 month

7
15
0 / 0

[oVirt 4.3.1-RC2 Test Day] Hyperconverged HE Deployment

by Guillaume Pavese

Hi, I tried again today to deploy HE on Gluster with oVirt 4.3.1 RC2 on a clean Nested environment (no precedent deploy attempts to clean before...). Gluster was deployed without problem from cockpit. I then snapshoted my vms before trying to deploy HE both from cockpit, then from cmdline. Both attempts failed at the same spot : [ INFO ] Creating Storage Domain [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check local VM dir stat] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Enforce local VM dir existence] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Obtain SSO token using username/password credentials] [ ERROR ] ConnectionError: Error while sending HTTP request: (7, 'Failed connect to vs-inf-int-ovt-fr-301-210.hostics.fr:443; No route to host') [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": false, "msg": "Error while sending HTTP request: (7, 'Failed connect to vs-inf-int-ovt-fr-301-210.hostics.fr:443; No route to host')"} Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs)[nfs]: [root@vs-inf-int-kvm-fr-301-210 ~]# traceroute vs-inf-int-ovt-fr-301-210.hostics.fr traceroute to vs-inf-int-ovt-fr-301-210.hostics.fr (192.168.122.147), 30 hops max, 60 byte packets 1 vs-inf-int-kvm-fr-301-210.hostics.fr (192.168.122.1) 3006.344 ms !H 3006.290 ms !H 3006.275 ms !H Guillaume Pavese Ingénieur Système et Réseau Interactiv-Group

6 years, 1 month

3
4
0 / 0

error: "cannot set lock, no free lockspace" (localized)

by Mike Lykov

Hi all. I have a HCI setup, glusterfs 3.12, ovirt 4.2.7, 4 nodes Yesterday I see 3 VMs detected by engine as "not responding" (it is marked as HA VMs) (it all located on ovirtnode1 server) Two of them are restarted by engine on other nodes successfully, but one are not. All get LOCALIZED message like 'cannot set lock: no free space on device' - what is this ? Why engine get that errors, and why some VMs can restart automatically, some not (but successfully restarted bu user via webui after some pause?) Who knows, what are you think? Full engine logs may be uploaded. from engine.log: start event --------------- 2019-02-26 17:04:05,308+04 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-59) [] VM 'd546add1-126a-4490-bc83-469bab659854'(openfire.miac) moved from 'Up' --> 'NotResponding' 2019-02-26 17:04:05,865+04 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-59) [] EVENT_ID: VM_NOT_RESPONDING(126), VM openfire.miac is not responding. 2019-02-26 17:04:05,865+04 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-59) [] VM '7a3af2e7-8296-4fe0-ac55-c52a4b1de93f'(e-l-k.miac) moved from 'Up' --> 'NotResponding' 2019-02-26 17:04:05,894+04 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-59) [] EVENT_ID: VM_NOT_RESPONDING(126), VM e-l-k.miac is not responding. 2019-02-26 17:04:05,895+04 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (EE-ManagedThreadFactory-engineScheduled-Thread-59) [] VM 'de76aa6c-a211-41de-8d85-7d2821c3980d'(tsgr-mon) moved from 'Up' --> 'NotResponding' 2019-02-26 17:04:05,926+04 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-59) [] EVENT_ID: VM_NOT_RESPONDING(126), VM tsgr-mon is not responding. --------------------------- 2019-02-26 17:04:22,237+04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-9) [] EVENT_ID: VM_DOWN_ERROR(119), VM openfire.miac is down with error. Exit message: VM has been terminated on the host. .... 2019-02-26 17:04:22,374+04 INFO [org.ovirt.engine.core.bll.VdsEventListener] (ForkJoinPool-1-worker-9) [] Highly Available VM went down. Attempting to restart. VM Name 'openfire.miac', VM Id 'd546add1-126a-4490-bc83-469bab659854' ... 2019-02-26 17:04:27,737+04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-5) [] EVENT_ID: VM_DOWN_ERROR(119), VM openfire.miac is down with error. Exit message: resource busy: Failed to acquire lock: Lease is held by another host. ... 2019-02-26 17:04:28,350+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-2886073) [] EVENT_ID: VDS_INITIATED_RUN_VM(506), Trying to restart VM openfire.miac on Host ovirtnode6.miac 2019-02-26 17:04:31,841+04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-2) [] EVENT_ID: VM_DOWN_ERROR(119), VM openfire.miac is down with error. Exit message: resource busy: Failed to acquire lock: Lease is held by another host. 2019-02-26 17:04:31,877+04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-2886082) [] EVENT_ID: VDS_INITIATED_RUN_VM_FAILED(507), Failed to restart VM openfire.miac on Host ovirtnode6.miac ... 2019-02-26 17:04:31,994+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-2886082) [] EVENT_ID: VDS_INITIATED_RUN_VM(506), Trying to restart VM openfire.miac on Host ovirtnode1.miac ..... 2019-02-26 17:04:36,054+04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-9) [] EVENT_ID: VM_DOWN_ERROR(119), VM openfire.miac is down with error. Exit message: Не удалось установить блокировку: На устройстве не осталось свободного места. 2019-02-26 17:04:36,054+04 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-9) [] add VM 'd546add1-126a-4490-bc83-469bab659854'(openfire.miac) to rerun treatment 2019-02-26 17:04:36,091+04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-2886083) [] EVENT_ID: VDS_INITIATED_RUN_VM_FAILED(507), Failed to restart VM openfire.miac on Host ovirtnode1.miac ------------------- No more attemtps for this VM were made (state now is 'Down') Engine tried restart this VM on some other nodes, get ' Lease is held by another host' (it is normal, because timeout for lock not expired?) and then got (LOCALIZED MESSAGE ?? Why it is localized while all other are not?) 'cannot set lock: no free space on device' Which 'device' it mean? How to see how many 'free space' in it? gluster volumes almost empty: ovirtstor1.miac:/engine 150G 7,5G 143G 5% /rhev/data-center/mnt/glusterSD/ovirtstor1.miac:_engine ovirtnode1.miac:/data 5,9T 42G 5,9T 1% /rhev/data-center/mnt/glusterSD/ovirtnode1.miac:_data ovirtnode1.miac:/vmstore 4,4T 194G 4,2T 5% /rhev/data-center/mnt/glusterSD/ovirtnode1.miac:_vmstore ovirtnode1.miac:/iso_storage 600G 1,3G 599G 1% /rhev/data-center/mnt/glusterSD/ovirtnode1.miac:_iso__storage ovirtnode1.miac:/export 5,1T 14G 5,1T 1% /rhev/data-center/mnt/glusterSD/ovirtnode1.miac:_export Other VMs also get this error about free space: ------------- 2019-02-26 17:05:05,142+04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-11) [] EVENT_ID: VM_DOWN_ERROR(119), VM tsgr-mon is down with error. Exit message: Не удалось установить блокир овку: На устройстве не осталось свободного места. 2019-02-26 17:05:43,526+04 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-11) [] VM 'de76aa6c-a211-41de-8d85-7d2821c3980d'(tsgr-mon) moved from 'PoweringUp' --> 'Up' 2019-02-26 17:05:43,537+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-11) [] EVENT_ID: VDS_INITIATED_RUN_VM(506), Trying to restart VM tsgr-mon on Host ovirtnode6.miac ---------------- And it is last message about this VM, state now is 'Up' Therefore all VMs are migrated from this node ovirtnode1, and later in log are records about it unresponsiveness: 2019-02-26 17:07:43,584+04 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler9) [35e05907] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), VDSM ovirtnode1.miac command GetGlusterVolumeHealIn foVDS failed: Message timeout which can be caused by communication issues 2019-02-26 17:07:43,592+04 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-2886194) [35e05907] EVENT_ID: VDS_HOST_NOT_RESPONDING_CONNECTING(9,008), Host ovirtnode1.miac i s not responding. It will stay in Connecting state for a grace period of 60 seconds and after that an attempt to fence the host will be issued. 2019-02-26 17:07:49,684+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-99) [4511cab1] EVENT_ID: FENCE_OPERATION_USING_AGENT_AND_PROXY_STARTED(9,020), Executing power management status on Host ovirtnode1.miac using Proxy Host ovirtnode5.miac and Fence Agent ipmilan:172.16.16.1. 2019-02-26 17:07:49,685+04 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-99) [4511cab1] START, FenceVdsVDSCommand(HostName = ovirtnode5.miac, ... action='STATUS', agent='FenceAgent:{id='338cbdd9-aab6-484c-a906-21e747a96a84', ... type='ipmilan', ip='172.16.16.1', port='null', user='admin', password='***', encryptOptions='false', options=''}', policy='null'}), log id: 281e6c2019-02-26 17:07:49,942+04 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-99) [4511cab1] FINISH, FenceVdsVDSCommand, return: FenceOperationResult:{status='SUCCESS', powerStatus='ON', message=''}, log id: 281e6c 2019-02-26 17:07:56,131+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-99) [317316e4] EVENT_ID: SYNC_STORAGE_DEVICES_IN_HOST(4,126), Manually synced the storage devices from host ovirtnode1.miac 2019-02-26 17:07:56,550+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-99) [3a88be4f] EVENT_ID: VDS_DETECTED(13), Status of host ovirtnode1.miac was set to Up. 2019-02-26 17:07:56,554+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-99) [3a88be4f] EVENT_ID: VDS_FENCE_STATUS(496), Host ovirtnode1.miac power managementwas verified successfully. ------------- After all, now I try to start VM that not restarted automatically: ------------- 2019-02-27 11:23:30,139+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-2921212) [8e405cb9-3a3a-42ab-ae05-5aaf40194b30] EVENT_ID: USER_STARTED_VM(153), VM openfire.miac was started by admin@internal-authz (Host: ovirtnode1.miac). ..... 2019-02-27 11:24:12,489+04 INFO [org.ovirt.engine.core.vdsbroker.monitoring.VmAnalyzer] (ForkJoinPool-1-worker-1) [] VM 'd546add1-126a-4490-bc83-469bab659854'(openfire.miac) moved from 'PoweringUp' --> 'Up' 2019-02-27 11:24:12,502+04 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-1) [] EVENT_ID: USER_RUN_VM(32), VM openfire.miac started on Host ovirtnode1.miac --------------- It started without problems on same host ovirtnode1. Strange. -- Mike

6 years, 1 month

2
3
0 / 0

VM poor iops

by Leo David

Hi Everyone, I am encountering the following issue on a single instance hyper-converged 4.2 setup. The following fio test was done: fio --randrepeat=1 --ioengine=libaio --direct=1 --gtod_reduce=1 --name=test --filename=test --bs=4k --iodepth=64 --size=4G --readwrite=randwrite The results are very poor doing the test inside of a vm with a prealocated disk on the ssd store: ~2k IOPS Same test done on the oVirt node directly on the mounted ssd_lvm: ~30k IOPS Same test done, this time on the gluster mount path: ~20K IOPS What could be the issue that the vms have this slow hdd performance ( 2k on ssd !! )? Thank you very much ! -- Best regards, Leo David

6 years, 1 month

4
11
0 / 0

oVirt - Unable to delete VM snapshots

by dean＠datacom.ca

Unable to delete VM snapshots. Error messages and log info below. Running oVirt VM 4.2.8.2-1.el7, I haven't been able to find good documentation on how to fix. Can someone point me in the right direction? Thank you, ... Dean Feb 28, 2019, 3:32:34 PM Failed to delete snapshot 'Centos7_20190120' for VM 'n2_Centos7'. Feb 28, 2019, 3:32:28 PM VDSM n1 command HSMGetAllTasksStatusesVDS failed: Volume does not exist: (u'b2391a0b-c9e5-4dfe-9551-1e1f25c5c622',) Feb 28, 2019, 3:32:22 PM VDSM n2 command MergeVDS failed: Merge failed The VM has snapshot(s) with disk(s) in illegal status. Please don't shutdown the vm before successfully retrying the snapshot delete. engine.log 2019-02-28 15:32:33,420-05 ERROR [org.ovirt.engine.core.bll.snapshots.RemoveSnapshotSingleDiskLiveCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-39) [f702317d-87cc-41dd-bcb2-12c6a2a93f10] Merging o f snapshot '3ddab9e6-a6ce-40d6-9ec6-815251471c5f' images 'fb974fb8-99d3-4a69-9f4e-096e30b85749'..'b2391a0b-c9e5-4dfe-9551-1e1f25c5c622' failed. Images have been marked illegal and can no longer be previewed or reverted to. Please retry Live Merge on the snapshot to complete the operation. 2019-02-28 15:32:33,429-05 ERROR [org.ovirt.engine.core.bll.snapshots.RemoveSnapshotSingleDiskLiveCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-39) [f702317d-87cc-41dd-bcb2-12c6a2a93f10] Ending co mmand 'org.ovirt.engine.core.bll.snapshots.RemoveSnapshotSingleDiskLiveCommand' with failure. 2019-02-28 15:32:33,578-05 INFO [org.ovirt.engine.core.bll.ConcurrentChildCommandsExecutionCallback] (EE-ManagedThreadFactory-engineScheduled-Thread-39) [f702317d-87cc-41dd-bcb2-12c6a2a93f10] Command 'Remov eSnapshot' id: '2243e15a-2569-498c-b0f8-de345321ba2f' child commands '[2e8dccfe-1c17-40ec-9f98-84f61863e450]' executions were completed, status 'FAILED' 2019-02-28 15:32:34,773-05 ERROR [org.ovirt.engine.core.bll.snapshots.RemoveSnapshotCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-10) [f702317d-87cc-41dd-bcb2-12c6a2a93f10] Ending command 'org.ovi rt.engine.core.bll.snapshots.RemoveSnapshotCommand' with failure. 2019-02-28 15:32:35,023-05 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-10) [f702317d-87cc-41dd-bcb2-12c6a2a93f10] EVENT_ID: USER_REMOVE_SNAPSHOT_FINISHED_FAILURE(357), Failed to delete snapshot 'Centos7_20190120' for VM 'n2_Centos7'. vdsm.log 2019-02-28 15:32:22,251-0500 INFO (jsonrpc/7) [jsonrpc.JsonRpcServer] RPC call Host.getStats succeeded in 0.02 seconds (__init__:573) 2019-02-28 15:32:22,326-0500 INFO (jsonrpc/0) [root] /usr/libexec/vdsm/hooks/after_get_caps/50_openstacknet: rc=0 err= (hooks:110) 2019-02-28 15:32:22,449-0500 INFO (jsonrpc/6) [api.host] START getAllVmStats() from=::ffff:192.168.1.10,48074 (api:46) 2019-02-28 15:32:22,452-0500 INFO (jsonrpc/6) [api.host] FINISH getAllVmStats return={'status': {'message': 'Done', 'code': 0}, 'statsList': (suppressed)} from=::ffff:192.168.1.10,48074 (api:52) 2019-02-28 15:32:22,453-0500 INFO (jsonrpc/6) [jsonrpc.JsonRpcServer] RPC call Host.getAllVmStats succeeded in 0.00 seconds (__init__:573) 2019-02-28 15:32:22,669-0500 INFO (jsonrpc/4) [api.virt] START merge(drive={u'imageID': u'96fbec76-c518-4010-8988-46b3c3172f09', u'volumeID': u'f7f1a3ec-d936-4482-8ec9-af2b3990b111', u'domainID': u'34af4473 -0779-42a0-8b97-e1ccc725fd60', u'poolID': u'5a3025a3-005f-03d4-0333-000000000382'}, baseVolUUID=u'fb974fb8-99d3-4a69-9f4e-096e30b85749', topVolUUID=u'b2391a0b-c9e5-4dfe-9551-1e1f25c5c622', bandwidth=u'0', jo bUUID=u'0b551b37-a6ee-4ac7-a004-2d410eaa8304') from=::ffff:192.168.1.10,48074, flow_id=f702317d-87cc-41dd-bcb2-12c6a2a93f10, vmId=a9082c6d-038e-4eb5-8436-69f93839a2ec (api:46) 2019-02-28 15:32:22,693-0500 INFO (jsonrpc/0) [root] /usr/libexec/vdsm/hooks/after_get_caps/openstacknet_utils.py: rc=0 err= (hooks:110) 2019-02-28 15:32:22,730-0500 ERROR (jsonrpc/4) [virt.vm] (vmId='a9082c6d-038e-4eb5-8436-69f93839a2ec') merge: Cannot find volume b2391a0b-c9e5-4dfe-9551-1e1f25c5c622 in drive vda's volume chain (vm:5944) 2019-02-28 15:32:22,731-0500 INFO (jsonrpc/4) [api.virt] FINISH merge return={'status': {'message': 'Merge failed', 'code': 52}} from=::ffff:192.168.1.10,48074, flow_id=f702317d-87cc-41dd-bcb2-12c6a2a93f10, vmId=a9082c6d-038e-4eb5-8436-69f93839a2ec (api:52)

6 years, 1 month

2
1
0 / 0

[ANN] oVirt 4.3.1 is now generally available

by Sandro Bonazzola

The oVirt Project is pleased to announce the general availability of oVirt 4.3.1, as of February 26th, 2019. This update is the first in a series of stabilization updates to the 4.3 series. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later * oVirt Node 4.3 (available for x86_64 only) Experimental tech preview for x86_64 and s390x architectures for Fedora 28 is also included. See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available for EL7 only - oVirt Node is available for EL7 only [2] - Fedora 28 based appliance and node couldn't be built due to a bug in Lorax (the tool used to build the images) affecting Fedora 28 and still pending a build from Fedora project. oVirt Node has been updated including: - oVirt 4.3.1: http://www.ovirt.org/release/4.3.1/ - ansible-2.7.8: https://github.com/ansible/ansible/blob/stable-2.7/changelogs/CHANGELOG-v... Relevant EPEL Errata included: - FEDORA-EPEL-2019-5f2f93029f security update in Fedora EPEL 7 for ansible ( https://bodhi.fedoraproject.org/updates/FEDORA-EPEL-2019-5f2f93029f ) Relevant CentOS Errata included: - CESA-2019:0231 Important CentOS 7 spice Security Update ( https://lists.centos.org/pipermail/centos-announce/2019-February/023192.html ) - CESA-2019:0368 Important CentOS 7 systemd Security Update ( https://lists.centos.org/pipermail/centos-announce/2019-February/023202.html ) Additional Resources: * Read more about the oVirt 4.3.1 release highlights: http://www.ovirt.org/release/4.3.1/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.1/ [2] http://resources.ovirt.org/pub/ovirt-4.3/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

6 years, 1 month

1
0
0 / 0

non-redhat version of ovirt-host-deploy

by ivan.kabaivanov＠gmail.com

Hi, I'm trying to get ovirt working on Linux From Scratch. So far so good, I can build and install it, and engine-setup also works fine. Now, I'm at the last stage, configuring it. And this is where I hit serious trouble: ovirt-host-deploy requires dnf/yum/rpm. But since I'm not running a redhat-based distro, I have none of those. Short of reading the source code, what are the steps I need to manually perform to get a working host? Thanks, IvanK.

6 years, 1 month

2
3
0 / 0

reinstall centos node (ovirt 4.2.7) fails due missing dependency on librbd1

by Mike Lykov

Hi All! I'm using ovirt-release42-4.2.7.1-1.el7.noarch centos-release-7-5.1804.5.el7.centos.x86_64 And HCI glusterfs deployment (no ceph). And yesterday I wanted an add hosted engine deploy on some node. It requires to enable maintenance mode, reinstall node with "hosted engine = deploy" config (in webui). I made it, but reinstall fails. In logs I see (not full list): ... Feb 27 16:35:39 Updated: libvirt-daemon-4.5.0-10.el7_6.4.x86_64 Feb 27 16:35:39 Updated: libvirt-daemon-driver-storage-core-4.5.0-10.el7_6.4.x86_64 Feb 27 16:36:04 Updated: libvirt-daemon-driver-storage-rbd-4.5.0-10.el7_6.4.x86_64 Feb 27 16:36:04 Updated: libvirt-daemon-driver-storage-disk-4.5.0-10.el7_6.4.x86_64 Feb 27 16:36:04 Updated: libvirt-daemon-driver-storage-4.5.0-10.el7_6.4.x86_64 After it # rpm -q librbd1 librbd1-0.94.5-2.el7.x86_64 фев 27 16:36:51 ovirtnode5.miac systemd[1]: Starting Virtualization daemon... фев 27 16:36:51 ovirtnode5.miac libvirtd[537]: 2019-02-27 12:36:51.338+0000: 537: info : libvirt version: 4.5.0, package: 10.el7_6.4 (CentOS BuildSystem <http://bugs.centos.org>, 2019-01-29-17:31:22, x86-01.bsys.centos.org) фев 27 16:36:51 ovirtnode5.miac libvirtd[537]: 2019-02-27 12:36:51.338+0000: 537: info : hostname: ovirtnode5.miac фев 27 16:36:51 ovirtnode5.miac libvirtd[537]: 2019-02-27 12:36:51.338+0000: 537: error : virModuleLoadFile:53 : внутренняя ошибка: Failed to load module '/usr/lib64/libvirt/storage-backend/libvirt_storage_backend_rbd.so': /usr/lib64/libv irt/storage-backend/libvirt_storage_backend_rbd.so: undefined symbol: rbd_diff_iterate2 фев 27 16:36:51 ovirtnode5.miac systemd[1]: libvirtd.service: main process exited, code=exited, status=3/NOTIMPLEMENTED фев 27 16:36:51 ovirtnode5.miac systemd[1]: Failed to start Virtualization daemon. There is a old bugs like https://bugzilla.redhat.com/show_bug.cgi?id=1316911 or new posts like http://dreamcloud.artark.ca/libvirtd-failure-after-latest-upgrade-in-rhel... Obviously, the libvirt* rpms are updated, but librbd* not. But why? Why libvirt packages are not strictly dependenced on all required package/lib versions? libvirt-daemon-driver-storage-rbd must require exactly that librbd version that can work with, i think. -- Mike

6 years, 1 month

1
0
0 / 0

Deploying Self-Hosted Engine Using Cockpit 4.3 not working

by kiv＠intercom.pro

Hi all. Fresh install host node 4.3. Install ok. Open web ui, and start deploying Self-Hosted Engine. When i add ISCSI storage - i get error: Retrieval of iSCSI targets failed. My iscsi target up and work.

6 years, 1 month

2
1
0 / 0

Feature: Hosted engine VM management

by Roy Golan

Hi all, Upcoming in 3.6 is enhancement for managing the hosted engine VM. In short, we want to: * Allow editing the Hosted engine VM, storage domain, disks, networks etc * Have a shared configuration for the hosted engine VM * Have a backup for the hosted engine VM configuration please review and comment on the wiki below: http://www.ovirt.org/Hosted_engine_VM_management Thanks, Roy

6 years, 1 month

2
3
0 / 0

Facing issues with settings up shared data-center

by Jinesh Ks

Host Node3 cannot access the Storage Domain(s) <UNKNOWN> attached to the Data Center Default. Setting Host state to Non-Operational. VDSM Node3 command ConnectStoragePoolVDS failed: Cannot find master domain: u'spUUID=a171b7d6-2c10-11e9-acee-10604b98fee8, msdUUID=bb73461e-02a2-45a6-85fa-5e39d860485c' The error message for connection 10.0.10.11:/exports/data returned by VDSM was: Problem while trying to mount target ----------- we have 3 Nodes, using NFS for storage domain... using shared data center. Anybody can help me?

6 years, 1 month

4
8
0 / 0

game

by shubhamrock19998＠gmail.com

I really want to spend my time with this game because https://onlinecheckers.net here so more things available.

6 years, 1 month

1
0
0 / 0

unable to put ovirt host in maintenance

by slaurencelle＠hotmail.com

Hello I'm trying to put one of my ovirt host ( whcih is also the ovirt-engine) into maintenance mode but i receive this error: Error while executing action: Cannot switch Host OvirtHome to Maintenance mode. Image transfer is in progress for the following (5) disks: b6338adf-a43b-4051-9bc0-7bb436876b5e, b8aa8ac8-e4bf-4a31-bd6f-02a33e04f8c6, f8548d7b-40c4-4d1e-9b21-8d4aa4966fff, 3626520b-ba03-452a-833f-4e4d48215047, 4b3242d0-73f6-46c5-99ac-9bac86b4ab41 Please wait for the operations to complete and try again I start does transfert from command line ans they failed, how can i delete the reference to those from the linux command line ? My ovirt version is the 4.3 (latest one) I'm running it on centos 7.6 with latest update Hope someone can help me ! Best regards stephane

6 years, 1 month

4
6
0 / 0

Host ends up non-operational after trying to add it to cluster

by Kristian Petersen

Hello all, I am building a small two-host oVirt cluster and am experiencing problems adding in the second host. The engine log shows a message saying it is marking the host as non-operational due to it not meeting minimum CPU requirements. However, both hosts are the using the same i7-4770 model CPUs. For some reason, oVirt detects them as the same model but the "CPU Type" from ost1 is listed as "Intel Haswell-noTSX IBRS SSBD Family" while host2's CPU Type is listed as "Intel Haswell-noTSX Family". The two computers are supposedly the exact same model from Dell with the same hardware in them. Anyone have any insight into this issue? -- Kristian Petersen System Administrator BYU Dept. of Chemistry and Biochemistry

6 years, 2 months

1
0
0 / 0

Problems with GlusterFS

by Endre Karlson

Hi we are seeing a high number of errors / failures within the logs and problems with our ovirt 4.3 cluster. IS there any assumption on a possible fix? The message "E [MSGID: 101191] [event-epoll.c:671:event_dispatch_epoll_worker] 0-epoll: Failed to dispatch handler" repeated 13 times between [2019-02-26 13:53:40.653905] and [2019-02-26 13:54:04.684140] [2019-02-26 13:54:08.684591] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-vmstore-client-2: changing port to 49153 (from 0) [2019-02-26 13:54:08.689021] E [MSGID: 101191] [event-epoll.c:671:event_dispatch_epoll_worker] 0-epoll: Failed to dispatch handler ==> /var/log/glusterfs/glustershd.log <== [2019-02-26 13:54:08.783380] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-vmstore-client-2: changing port to 49153 (from 0) [2019-02-26 13:54:09.427338] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-engine-client-2: changing port to 49152 (from 0) [2019-02-26 13:54:10.785533] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-engine-client-2: changing port to 49152 (from 0) [2019-02-26 13:54:12.432411] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-vmstore-client-2: changing port to 49153 (from 0) ==> /var/log/glusterfs/rhev-data-center-mnt-glusterSD-ovirt4-stor.creator.local:_engine.log <== [2019-02-26 13:54:12.579095] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-engine-client-2: changing port to 49152 (from 0) ==> /var/log/glusterfs/rhev-data-center-mnt-glusterSD-ovirt4-stor.creator.local:vmstore.log <== [2019-02-26 13:54:12.689449] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-vmstore-client-2: changing port to 49153 (from 0) ==> /var/log/glusterfs/glustershd.log <== [2019-02-26 13:54:12.790471] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-vmstore-client-2: changing port to 49153 (from 0) [2019-02-26 13:54:13.437351] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-engine-client-2: changing port to 49152 (from 0)

6 years, 2 months

2
1
0 / 0

Local Storage domain to Shared

by Matt Simonsen

Hello all, I have a few nodes with local storage, and I've considered exporting them via NFS to migrate into shared storage, more than a few times. I have thought of this post on the ovirt-users list many times: https://lists.ovirt.org/pipermail/users/2017-December/085521.html Is this procedure documented & fully supported? Or is it something that just happens to work? The instructions provided by Gianluca seem very clear. If this isn't documented better, ie: a blog for the site, what are the things that I should include to make it of value for going on the site? Thanks, Matt

6 years, 2 months

3
2
0 / 0

Re: [oVirt 4.3.1 Test Day] cmdline HE Deployment

by Guillaume Pavese

It fails too : I made sure PermitTunnel=yes in sshd config but when I try to connect to the forwarded port I get the following error on the openened host ssh session : [gpavese@sheepora-X230 ~]$ ssh -v -L 5900: vs-inf-int-kvm-fr-301-210.hostics.fr:5900 root(a)vs-inf-int-kvm-fr-301-210.hostics.fr ... [root@vs-inf-int-kvm-fr-301-210 ~]# debug1: channel 3: free: direct-tcpip: listening port 5900 for vs-inf-int-kvm-fr-301-210.hostics.fr port 5900, connect from ::1 port 42144 to ::1 port 5900, nchannels 4 debug1: Connection to port 5900 forwarding to vs-inf-int-kvm-fr-301-210.hostics.fr port 5900 requested. debug1: channel 3: new [direct-tcpip] channel 3: open failed: connect failed: Connection refused debug1: channel 3: free: direct-tcpip: listening port 5900 for vs-inf-int-kvm-fr-301-210.hostics.fr port 5900, connect from 127.0.0.1 port 32778 to 127.0.0.1 port 5900, nchannels 4 and in journalctl : févr. 25 14:55:38 vs-inf-int-kvm-fr-301-210.hostics.fr sshd[19595]: error: connect_to vs-inf-int-kvm-fr-301-210.hostics.fr port 5900: failed. Guillaume Pavese Ingénieur Système et Réseau Interactiv-Group On Mon, Feb 25, 2019 at 10:44 PM Simone Tiraboschi <stirabos(a)redhat.com> wrote: > > > > On Mon, Feb 25, 2019 at 2:35 PM Guillaume Pavese < > guillaume.pavese(a)interactiv-group.com> wrote: > >> I made sure of everything and even stopped firewalld but still can't >> connect : >> >> [root@vs-inf-int-kvm-fr-301-210 ~]# cat >> /var/run/libvirt/qemu/HostedEngineLocal.xml >> <graphics type='vnc' port='*5900*' autoport='yes' >> *listen='127.0.0.1*'> >> <listen type='address' address='*127.0.0.1*' fromConfig='1' >> autoGenerated='no'/> >> >> [root@vs-inf-int-kvm-fr-301-210 ~]# netstat -pan | grep 59 >> tcp 0 0 127.0.0.1:5900 0.0.0.0:* >> LISTEN 13376/qemu-kvm >> > > > I suggest to try ssh tunneling, run > ssh -L 5900:vs-inf-int-kvm-fr-301-210.hostics.fr:5900 > root(a)vs-inf-int-kvm-fr-301-210.hostics.fr > > and then > remote-viewer vnc://localhost:5900 > > > >> >> [root@vs-inf-int-kvm-fr-301-210 ~]# systemctl status firewalld.service >> ● firewalld.service - firewalld - dynamic firewall daemon >> Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled; >> vendor preset: enabled) >> *Active: inactive (dead)* >> *févr. 25 14:24:03 vs-inf-int-kvm-fr-301-210.hostics.fr >> <http://vs-inf-int-kvm-fr-301-210.hostics.fr> systemd[1]: Stopped firewalld >> - dynamic firewall daemon.* >> >> From my laptop : >> [gpavese@sheepora-X230 ~]$ telnet vs-inf-int-kvm-fr-301-210.hostics.fr >> *5900* >> Trying 10.199.210.11... >> [*nothing gets through...*] >> ^C >> >> For making sure : >> [gpavese@sheepora-X230 ~]$ telnet vs-inf-int-kvm-fr-301-210.hostics.fr >> *9090* >> Trying 10.199.210.11... >> *Connected* to vs-inf-int-kvm-fr-301-210.hostics.fr. >> Escape character is '^]'. >> >> >> >> >> >> Guillaume Pavese >> Ingénieur Système et Réseau >> Interactiv-Group >> >> >> On Mon, Feb 25, 2019 at 10:24 PM Parth Dhanjal <dparth(a)redhat.com> wrote: >> >>> Hey! >>> >>> You can check under /var/run/libvirt/qemu/HostedEngine.xml >>> Search for 'vnc' >>> From there you can look up the port on which the HE VM is available and >>> connect to the same. >>> >>> >>> On Mon, Feb 25, 2019 at 6:47 PM Guillaume Pavese < >>> guillaume.pavese(a)interactiv-group.com> wrote: >>> >>>> 1) I am running in a Nested env, but under libvirt/kvm on remote Centos >>>> 7.4 Hosts >>>> >>>> Please advise how to connect with VNC to the local HE vm. I see it's >>>> running, but this is on a remote host, not my local machine : >>>> qemu 13376 100 3.7 17679424 845216 ? Sl 12:46 85:08 >>>> /usr/libexec/qemu-kvm -name guest=HostedEngineLocal,debug-threads=on -S >>>> -object >>>> secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-1-HostedEngineLocal/master-key.aes >>>> -machine pc-i440fx-rhel7.6.0,accel=kvm,usb=off,dump-guest-core=off -cpu >>>> Haswell-noTSX,+kvmclock -m 16384 -realtime mlock=off -smp >>>> 4,sockets=4,cores=1,threads=1 -uuid 6fe7c1c3-ea93-4343-a385-0d9e14bb563a >>>> -no-user-config -nodefaults -chardev >>>> socket,id=charmonitor,fd=27,server,nowait -mon >>>> chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown >>>> -global PIIX4_PM.disable_s3=1 -global PIIX4_PM.disable_s4=1 -boot >>>> menu=off,strict=on -device >>>> virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4 -drive >>>> file=/var/tmp/localvmgmyYik/images/15023c8a-e3a7-4851-a97d-3b90996b423b/07fdcff3-11ce-4f7c-af05-0a878593e78e,format=qcow2,if=none,id=drive-virtio-disk0 >>>> -device >>>> virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 >>>> -drive >>>> file=/var/tmp/localvmgmyYik/seed.iso,format=raw,if=none,id=drive-ide0-0-0,readonly=on >>>> -device ide-cd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -netdev >>>> tap,fd=29,id=hostnet0,vhost=on,vhostfd=30 -device >>>> virtio-net-pci,netdev=hostnet0,id=net0,mac=00:16:3e:3e:fe:28,bus=pci.0,addr=0x3 >>>> -chardev pty,id=charserial0 -device >>>> isa-serial,chardev=charserial0,id=serial0 -chardev >>>> socket,id=charchannel0,fd=31,server,nowait -device >>>> virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 >>>> *-vnc 127.0.0.1:0 <http://127.0.0.1:0> -device VGA*,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2 >>>> -object rng-random,id=objrng0,filename=/dev/random -device >>>> virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x6 -sandbox >>>> on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny >>>> -msg timestamp=on >>>> >>>> >>>> 2) [root@vs-inf-int-kvm-fr-301-210 ~]# cat >>>> /etc/libvirt/qemu/networks/default.xml >>>>  >>>> >>>> <network> >>>> <name>default</name> >>>> <uuid>ba7bbfc8-28b8-459e-a42d-c2d6218e2cb6</uuid> >>>> <forward mode='nat'/> >>>> <bridge name='virbr0' stp='on' delay='0'/> >>>> <mac address='52:54:00:e5:fe:3b'/> >>>> <ip address='192.168.122.1' netmask='255.255.255.0'> >>>> <dhcp> >>>> <range start='192.168.122.2' end='192.168.122.254'/> >>>> </dhcp> >>>> </ip> >>>> </network> >>>> You have new mail in /var/spool/mail/root >>>> [root@vs-inf-int-kvm-fr-301-210 ~] >>>> >>>> >>>> >>>> Guillaume Pavese >>>> Ingénieur Système et Réseau >>>> Interactiv-Group >>>> >>>> >>>> On Mon, Feb 25, 2019 at 9:57 PM Simone Tiraboschi <stirabos(a)redhat.com> >>>> wrote: >>>> >>>>> >>>>> >>>>> On Mon, Feb 25, 2019 at 1:14 PM Guillaume Pavese < >>>>> guillaume.pavese(a)interactiv-group.com> wrote: >>>>> >>>>>> He deployment with "hosted-engine --deploy" fails at TASK >>>>>> [ovirt.hosted_engine_setup : Get local VM IP] >>>>>> >>>>>> See following Error : >>>>>> >>>>>> 2019-02-25 12:46:50,154+0100 INFO >>>>>> otopi.ovirt_hosted_engine_setup.ansible_utils >>>>>> ansible_utils._process_output:109 TASK [ovirt.hosted_engine_setup : Get >>>>>> local VM IP] >>>>>> 2019-02-25 12:55:26,823+0100 DEBUG >>>>>> otopi.ovirt_hosted_engine_setup.ansible_utils >>>>>> ansible_utils._process_output:103 {u'_ansible_parsed': True, >>>>>> u'stderr_lines': [], u'cmd': u"virsh -r net-dhcp-leases default | grep -i 00 >>>>>> :16:3e:3e:fe:28 | awk '{ print $5 }' | cut -f1 -d'/'", u'end': >>>>>> u'2019-02-25 12:55:26.666925', u'_ansible_no_log': False, u'stdout': u'', >>>>>> u'changed': True, u'invocation': {u'module_args': {u'warn': True, >>>>>> u'executable': >>>>>> None, u'_uses_shell': True, u'_raw_params': u"virsh -r >>>>>> net-dhcp-leases default | grep -i 00:16:3e:3e:fe:28 | awk '{ print $5 }' | >>>>>> cut -f1 -d'/'", u'removes': None, u'argv': None, u'creates': None, >>>>>> u'chdir': None, u'std >>>>>> in': None}}, u'start': u'2019-02-25 12:55:26.584686', u'attempts': >>>>>> 50, u'stderr': u'', u'rc': 0, u'delta': u'0:00:00.082239', u'stdout_lines': >>>>>> []} >>>>>> 2019-02-25 12:55:26,924+0100 ERROR >>>>>> otopi.ovirt_hosted_engine_setup.ansible_utils >>>>>> ansible_utils._process_output:107 fatal: [localhost]: FAILED! => >>>>>> {"attempts": 50, "changed": true, "cmd": "virsh -r net-dhcp-leases default >>>>>> | grep -i 00:16:3e:3e:fe:28 | awk '{ print $5 }' | cut -f1 -d'/'", "delta": >>>>>> "0:00:00.082239", "end": "2019-02-25 12:55:26.666925", "rc": 0, "start": >>>>>> "2019-02-25 12:55:26.584686", "stderr": "", "stderr_lines": [], "stdout": >>>>>> "", "stdout_lines": []} >>>>>> >>>>> >>>>> Here we are just waiting for the bootstrap engine VM to fetch an IP >>>>> address from default libvirt network over DHCP but it your case it never >>>>> happened. >>>>> Possible issues: something went wrong in the bootstrap process for the >>>>> engine VM or the default libvirt network is not correctly configured. >>>>> >>>>> 1. can you try to reach the engine VM via VNC and check what's >>>>> happening there? (another question, are you running it nested? AFAIK it >>>>> will not work if nested over ESXi) >>>>> 2. can you please share the output of >>>>> cat /etc/libvirt/qemu/networks/default.xml >>>>> >>>>> >>>>>> >>>>>> Guillaume Pavese >>>>>> Ingénieur Système et Réseau >>>>>> Interactiv-Group >>>>>> _______________________________________________ >>>>>> Users mailing list -- users(a)ovirt.org >>>>>> To unsubscribe send an email to users-leave(a)ovirt.org >>>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>>>>> oVirt Code of Conduct: >>>>>> https://www.ovirt.org/community/about/community-guidelines/ >>>>>> List Archives: >>>>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/VXRMU3SQWTM... >>>>>> >>>>> _______________________________________________ >>>> Users mailing list -- users(a)ovirt.org >>>> To unsubscribe send an email to users-leave(a)ovirt.org >>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>>> oVirt Code of Conduct: >>>> https://www.ovirt.org/community/about/community-guidelines/ >>>> List Archives: >>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/45UR44ITQTV... >>>> >>>

6 years, 2 months

2
11
0 / 0

oVirt-4.2: HE rebooting continuously and 2 hosts non-operatinal

by Parth Dhanjal

Hey! I'm facing a problem with oVirt-4.2 HE. The HE is rebooting continuously. I tried accessing the VM through the VNC console. But it is not responding. 2 hosts are also Non-Operational. I tried debugging, but couldn't resolve it Though I found a few errors. Error in the agent log for one of the non-operational hosts - http://pastebin.test.redhat.com/721991 Error in the broker log - http://pastebin.test.redhat.com/721990 Also, I couldn't see the brick mounted on the non-op hosts. Even though the volume status seems fine. Anyone knows why is this issue occurring? Regards Parth Dhanjal

6 years, 2 months

2
3
0 / 0

oVirt Node install failed

by kiv＠intercom.pro

Hi all! The following error occurs during installation oVirt Node 4.2.8: EVENT_ID: VDS_INSTALL_IN_PROGRESS_ERROR(511), An error has occurred during installation of Host hostname_ovirt_node2: Yum Cannot queue package dmidecode: Cannot retrieve metalink for repository: ovirt-4.2-epel/x86_64. Please verify its path and try again From shell ovirt node type command: yum install dmidecode Cannot retrieve metalink for repository: ovirt-4.2-epel/x86_64. Please verify its path and try again Uploading Enabled Repositories Report Loaded plugins: fastestmirror, product-id, subscription-manager This system is not registered with an entitlement server. You can use subscription-manager to register. Cannot upload enabled repos report, is this client registered? Does anyone know how to fix this?

6 years, 2 months

3
11
0 / 0

AIC JBOD RAID Disks automatically going offline under OVirt?

by nikhilbhalwankar＠yahoo.co.in

Hi, We are facing weird issue. We have a AIC JBOD with Ovirt Node installed. This Node is added under Ovirt engine. We faced issues related to RAID Disks going offline two times, 1) OVA Import from VMWare ESXi to OVirt 2) Delete existing OVirt VM which is in shutdown state In both these cases, suddenly Disks from RAID array (which we are using as Fiber Channel under OVirt) go offline. Can anybody please help what can be done in this case?

6 years, 2 months

1
0
0 / 0

AIC JBOD RAID Disks automatically going offline under OVirt?

by nikhilbhalwankar＠yahoo.co.in

Hi, We are facing weird issue. We have a AIC JBOD with Ovirt Node installed. This Node is added under Ovirt engine. We faced issues related to RAID Disks going offline two times, 1) OVA Import from VMWare ESXi to OVirt 2) Delete existing OVirt VM which is in shutdown state In both these cases, suddenly Disks from RAID array (which we are using as Fiber Channel under OVirt) go offline. Can anybody please help what can be done in this case?

6 years, 2 months

1
0
0 / 0

glusterevents daemon fails after upgrade from 4.2.8 to 4.3

by Edward Berger

I upgraded some nodes from 4.28 to 4.3 and now when I look at the cockpit "services" tab I see a red failure for Gluster Events Notifier and clicking through I get these messages below. 14:00 glustereventsd.service failed. systemd 14:00 Unit glustereventsd.service entered failed state. systemd 14:00 glustereventsd.service: main process exited, code=exited, status=1/FAILURE systemd 14:00 ValueError: Attempted relative import in non-package glustereventsd 14:00 from .eventsapiconf import (LOG_FILE, glustereventsd 14:00 File "/usr/libexec/glusterfs/events/utils.py", line 29, in <module> glustereventsd 14:00 import utils glustereventsd 14:00 File "/usr/libexec/glusterfs/events/handlers.py", line 12, in <module> glustereventsd 14:00 import handlers glustereventsd 14:00 File "/usr/sbin/glustereventsd", line 24, in <module> glustereventsd

6 years, 2 months

5
6
0 / 0

Re: [ovirt-users] Large DWH Database, how to empty

by Matt .

Hi, OK thanks! I saw that after upgrading to 4.0.5 from 4.0.4 the DB already dropped with around 500MB directly and is now at 2GB smaller. Does this sounds familiar to you with other settings in 4.0.5 ? Thanks, Matt 2017-01-08 10:45 GMT+01:00 Shirly Radco <sradco(a)redhat.com>: > No. That will corrupt your database. > > Are you using the full dwh or the smaller version for the dashboards? > > Please set the delete thresholds to save less data and the data older then > the time you set will be deleted. > Add a file to /ovirt-engine-dwhd.conf.d/ > update_time_to_keep_records.conf > > Add these lines with the new configurations. The numbers represent the hours > to keep the data. > > DWH_TABLES_KEEP_SAMPLES=24 > DWH_TABLES_KEEP_HOURLY=1440 > DWH_TABLES_KEEP_DAILY=43800 > > > These are the configurations for a full dwh. > > The smaller version configurations are: > DWH_TABLES_KEEP_SAMPLES=24 > DWH_TABLES_KEEP_HOURLY=720 > DWH_TABLES_KEEP_DAILY=0 > > The delete process by default at 3am every day (DWH_DELETE_JOB_HOUR=3) > > Best regards, > > Shirly Radco > > BI Software Engineer > Red Hat Israel Ltd. > 34 Jerusalem Road > Building A, 4th floor > Ra'anana, Israel 4350109 > > > On Fri, Jan 6, 2017 at 6:35 PM, Matt . <yamakasi.014(a)gmail.com> wrote: >> >> Hi, >> >> I seem to have some large database for the DWH logging and I wonder >> how I can empty it safely. >> >> Can I just simply empty the database ? >> >> Have a good weekend! >> >> Cheers, >> >> Matt >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > >

6 years, 2 months

1
0
0 / 0

engine-iso-uploader very slow

by t.marchetti＠caen.it

Hi, I'm a newbe with ovirt, I've install on my test machine ovirt with self hosted engine with nfs storage. I'm tryng to execute <engine-iso-uploader upload -i ISO /tmp/ubuntu-18.04-desktop-amd64.iso> and the execution is very slow, approx 2 hour, but I don't know why, any suggestion? Thanks in advance Bye

6 years, 2 months

4
3
0 / 0

Re: [ovirt-users] Packet loss

by Doron Fediuck

----_com.android.email_640187878761650 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: base64 SGkgS3lsZSzCoApXZSBtYXkgaGF2ZSBzZWVuIHNvbWV0aGluZyBzaW1pbGFyIGluIHRoZSBwYXN0 IGJ1dCBJIHRoaW5rIHRoZXJlIHdlcmUgdmxhbnMgaW52b2x2ZWQuwqAKSXMgaXQgdGhlIHNhbWUg Zm9yIHlvdT/CoApUb255IC8gRGFuLCBkb2VzIGl0IHJpbmcgYSBiZWxsP8Kg ----_com.android.email_640187878761650 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: base64 PGh0bWw+PGhlYWQ+PG1ldGEgaHR0cC1lcXVpdj0iQ29udGVudC1UeXBlIiBjb250ZW50PSJ0ZXh0 L2h0bWw7IGNoYXJzZXQ9VVRGLTgiPjwvaGVhZD48Ym9keSA+PGRpdj5IaSBLeWxlLCZuYnNwOzwv ZGl2PjxkaXY+V2UgbWF5IGhhdmUgc2VlbiBzb21ldGhpbmcgc2ltaWxhciBpbiB0aGUgcGFzdCBi dXQgSSB0aGluayB0aGVyZSB3ZXJlIHZsYW5zIGludm9sdmVkLiZuYnNwOzwvZGl2PjxkaXY+SXMg aXQgdGhlIHNhbWUgZm9yIHlvdT8mbmJzcDs8L2Rpdj48ZGl2PlRvbnkgLyBEYW4sIGRvZXMgaXQg cmluZyBhIGJlbGw/Jm5ic3A7PC9kaXY+PC9ib2R5PjwvaHRtbD4= ----_com.android.email_640187878761650--

6 years, 2 months

2
1
0 / 0

Re: Adding user to internalz with webadmin?

by Strahil

You need to login on the engine and use 'ovirt-aaa-jdbc-tool' to create your user and assign a password. Once you have the user, you can assign roles to it via the web UI. Best Regards, Strahil NikolovOn Feb 26, 2019 07:21, Juhani Rautiainen <juhani.rautiainen(a)gmail.com> wrote: > > Hi! > > How do you add users to internalz with webadmin? I mean there is add a > button in Administration->Users which opens 'Add Users and > Groups'-window . Windows has 'Add'- and 'Add and close'- buttons in > the bottom. Just can't figure out how they work. Pushing either of > those Add-buttons just closes the window. > > -Juhani > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/Y4GFUACEHEE...

6 years, 2 months

1
0
0 / 0

Re: oVirt Node install failed

by Strahil

I guess you can log on ovirt2 and run hosted-engine --set-maintenance --mode=local && sleep 30 && hosted-engine --vm-status Then reinstall ovirt2 from the web UI and mark the engine for deployment. Once the reinstall is over - remove maintenance via : hosted-engine --set-maintenance --mode=none Best Regards, Strahil Nikolov

6 years, 2 months

1
0
0 / 0

Move infrastructure ,how to change FQDN

by Fabrice SOLER

Hello, I need to move all the physical infrastructure oVirt to another site (for student education). The node's FQDN and the hosted engine's FQDN must change. The version is ovirt 4.2.8 for the hosted engine and nodes. Is there sommone who know how to do ? Fabrice SOLER

6 years, 2 months

2
1
0 / 0

[ANN] oVirt 4.3.1 Second Release Candidate is now available

by Sandro Bonazzola

The oVirt Project is pleased to announce the availability of the oVirt 4.3.1 Second Release Candidate, as of February 26th, 2019. This update is a release candidate of the first in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later * oVirt Node 4.3 (available for x86_64 only) Experimental tech preview for x86_64 and s390x architectures for Fedora 28 is also included. See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available for EL7 only - oVirt Node is available for EL7 only [2] - Fedora 28 based appliance and node couldn't be built due to a bug in Lorax (the tool used to build the images) affecting Fedora 28. Additional Resources: * Read more about the oVirt 4.3.1 release highlights: http://www.ovirt.org/release/4.3.1/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.1/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

6 years, 2 months

1
0
0 / 0

running engine-setup against postgresql running on non-default port

by ivan.kabaivanov＠gmail.com

Hi, I'm running Linux From Scratch and I'm compiling ovirt from source. It all builds and installs fine. However, since I may sometimes run engine-setup from within a chroot on a host that already runs ovirt-engine and postgresql on port 5432, I would like to be able to start a new instance of postgresql on port 55555 inside the chroot, run engine-setup within the same chroot, tell it to connect to postgresql on port 55555, then once set up, I would like to manually change all config files and change postgresql port from 55555 to 5432, so when I transfer this installation to a different computer postgresql will run on 5432 and ovirt-engine (and all the other components) will know to use port 5432. Trouble is, this is easier said than done. Even when I tell engine-setup to connect to 55555 something insists on connecting to 5432: [ INFO ] Installing PostgreSQL uuid-ossp extension into database [ ERROR ] Failed to execute stage 'Misc configuration': could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? I've manually changed all the ovirt-engine and ovirt-engine-dwh files that contained 5432, to no avail. Ideas? Thanks, IvanK.

6 years, 2 months

2
3
0 / 0

Gluster setup Problem

by Matthew Roth

I have 3 servers, Node 1 is 3tb /dev/sda, Node 2, 3tb /dev/sdb, node3 3tb /dev/sdb I start the process for gluster deployment. I change node 1 to sda and all the other ones to sdb. I get no errors however, when I get to Creating physical Volume all it does is spin forever . doesnt get any further. I can leave it there for 5 hours and doesn't go anywhere. #gdeploy configuration generated by cockpit-gluster plugin [hosts] cmdnode1.cmd911.com cmdnode2.cmd911.com cmdnode3.cmd911.com [script1:cmdnode1.cmd911.com] action=execute ignore_script_errors=no file=/usr/share/gdeploy/scripts/grafton-sanity-check.sh -d sda -h cmdnode1.cmd911.com, cmdnode2.cmd911.com, cmdnode3.cmd911.com [script1:cmdnode2.cmd911.com] action=execute ignore_script_errors=no file=/usr/share/gdeploy/scripts/grafton-sanity-check.sh -d sdb -h cmdnode1.cmd911.com, cmdnode2.cmd911.com, cmdnode3.cmd911.com [script1:cmdnode3.cmd911.com] action=execute ignore_script_errors=no file=/usr/share/gdeploy/scripts/grafton-sanity-check.sh -d sdb -h cmdnode1.cmd911.com, cmdnode2.cmd911.com, cmdnode3.cmd911.com [disktype] raid6 [diskcount] 12 [stripesize] 256 [service1] action=enable service=chronyd [service2] action=restart service=chronyd [shell2] action=execute command=vdsm-tool configure --force [script3] action=execute file=/usr/share/gdeploy/scripts/blacklist_all_disks.sh ignore_script_errors=no [pv1:cmdnode1.cmd911.com] action=create devices=sda ignore_pv_errors=no [pv1:cmdnode2.cmd911.com] action=create devices=sdb ignore_pv_errors=no [pv1:cmdnode3.cmd911.com] action=create devices=sdb ignore_pv_errors=no [vg1:cmdnode1.cmd911.com] action=create vgname=gluster_vg_sda pvname=sda ignore_vg_errors=no [vg1:cmdnode2.cmd911.com] action=create vgname=gluster_vg_sdb pvname=sdb ignore_vg_errors=no [vg1:cmdnode3.cmd911.com] action=create vgname=gluster_vg_sdb pvname=sdb ignore_vg_errors=no [lv1:cmdnode1.cmd911.com] action=create poolname=gluster_thinpool_sda ignore_lv_errors=no vgname=gluster_vg_sda lvtype=thinpool size=1005GB poolmetadatasize=5GB [lv2:cmdnode2.cmd911.com] action=create poolname=gluster_thinpool_sdb ignore_lv_errors=no vgname=gluster_vg_sdb lvtype=thinpool size=1005GB poolmetadatasize=5GB [lv3:cmdnode3.cmd911.com] action=create poolname=gluster_thinpool_sdb ignore_lv_errors=no vgname=gluster_vg_sdb lvtype=thinpool size=41GB poolmetadatasize=1GB [lv4:cmdnode1.cmd911.com] action=create lvname=gluster_lv_engine ignore_lv_errors=no vgname=gluster_vg_sda mount=/gluster_bricks/engine size=100GB lvtype=thick [lv5:cmdnode1.cmd911.com] action=create lvname=gluster_lv_data ignore_lv_errors=no vgname=gluster_vg_sda mount=/gluster_bricks/data lvtype=thinlv poolname=gluster_thinpool_sda virtualsize=500GB [lv6:cmdnode1.cmd911.com] action=create lvname=gluster_lv_vmstore ignore_lv_errors=no vgname=gluster_vg_sda mount=/gluster_bricks/vmstore lvtype=thinlv poolname=gluster_thinpool_sda virtualsize=500GB [lv7:cmdnode2.cmd911.com] action=create lvname=gluster_lv_engine ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/engine size=100GB lvtype=thick [lv8:cmdnode2.cmd911.com] action=create lvname=gluster_lv_data ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/data lvtype=thinlv poolname=gluster_thinpool_sdb virtualsize=500GB [lv9:cmdnode2.cmd911.com] action=create lvname=gluster_lv_vmstore ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/vmstore lvtype=thinlv poolname=gluster_thinpool_sdb virtualsize=500GB [lv10:cmdnode3.cmd911.com] action=create lvname=gluster_lv_engine ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/engine size=20GB lvtype=thick [lv11:cmdnode3.cmd911.com] action=create lvname=gluster_lv_data ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/data lvtype=thinlv poolname=gluster_thinpool_sdb virtualsize=20GB [lv12:cmdnode3.cmd911.com] action=create lvname=gluster_lv_vmstore ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/vmstore lvtype=thinlv poolname=gluster_thinpool_sdb virtualsize=20GB [selinux] yes [service3] action=restart service=glusterd slice_setup=yes [firewalld] action=add ports=111/tcp,2049/tcp,54321/tcp,5900/tcp,5900-6923/tcp,5666/tcp,16514/tcp,54322/tcp services=glusterfs [script2] action=execute file=/usr/share/gdeploy/scripts/disable-gluster-hooks.sh [shell3] action=execute command=usermod -a -G gluster qemu [volume1] action=create volname=engine transport=tcp replica=yes replica_count=3 key=group,storage.owner-uid,storage.owner-gid,network.ping-timeout,performance.strict-o-direct,network.remote-dio,cluster.granular-entry-heal value=virt,36,36,30,on,off,enable brick_dirs=cmdnode1.cmd911.com:/gluster_bricks/engine/engine,cmdnode2.cmd911.com:/gluster_bricks/engine/engine,cmdnode3.cmd911.com:/gluster_bricks/engine/engine ignore_volume_errors=no arbiter_count=1 [volume2] action=create volname=data transport=tcp replica=yes replica_count=3 key=group,storage.owner-uid,storage.owner-gid,network.ping-timeout,performance.strict-o-direct,network.remote-dio,cluster.granular-entry-heal value=virt,36,36,30,on,off,enable brick_dirs=cmdnode1.cmd911.com:/gluster_bricks/data/data,cmdnode2.cmd911.com:/gluster_bricks/data/data,cmdnode3.cmd911.com:/gluster_bricks/data/data ignore_volume_errors=no arbiter_count=1 [volume3] action=create volname=vmstore transport=tcp replica=yes replica_count=3 key=group,storage.owner-uid,storage.owner-gid,network.ping-timeout,performance.strict-o-direct,network.remote-dio,cluster.granular-entry-heal value=virt,36,36,30,on,off,enable brick_dirs=cmdnode1.cmd911.com:/gluster_bricks/vmstore/vmstore,cmdnode2.cmd911.com:/gluster_bricks/vmstore/vmstore,cmdnode3.cmd911.com:/gluster_bricks/vmstore/vmstore ignore_volume_errors=no arbiter_count=1

6 years, 2 months

3
4
0 / 0

Adding user to internalz with webadmin?

by Juhani Rautiainen

Hi! How do you add users to internalz with webadmin? I mean there is add a button in Administration->Users which opens 'Add Users and Groups'-window . Windows has 'Add'- and 'Add and close'- buttons in the bottom. Just can't figure out how they work. Pushing either of those Add-buttons just closes the window. -Juhani

6 years, 2 months

2
2
0 / 0

Tracking down high writes in GlusterFS volume

by Jayme

Running an oVirt 4.3 HCI 3-way replica cluster with SSD backed storage. I've noticed that my SSD writes (smart Total_LBAs_Written) are quite high on one particular drive. Specifically I've noticed one volume is much much higher total bytes written than others (despite using less overall space). My volume is writing over 1TB of data per day (by my manual calculation, and with glusterfs profiling) and wearing my SSDs quickly, how can I best determine which VM or process is at fault here? There are 5 low use VMs using the volume in question. I'm attempting to track iostats on each of the vm's individually but so far I'm not seeing anything obvious that would account for 1TB of writes per day that the gluster volume is reporting.

6 years, 2 months

2
1
0 / 0

Add compute nodes offline

by xilazz＠126.com

Hi, when I add compute nodes, I do not intend to add compute nodes to the engine controller without connecting to the external network: An error has occurred during installation of Host node5.test.com: Failed to execute stage 'Environment customization': Cannot retrieve metalink for repository: Please verify its path and try again. Do I need to manually download some offline packages in this case?

6 years, 2 months

2
2
0 / 0

Windows service applications migrated to the ovirt platform

by xilazz＠126.com

Hi，I now have a physical machine on which I want to migrate Windows applications to the ovirt management platform. May I ask if virt-p2v can be used for migration? Does ovirt itself have a migration tool to use?

6 years, 2 months

1
0
0 / 0

Re: oVirt Node install failed

by Strahil

What is the output of 'hosted-engine --vm-status' from the host that is hosting the HostedEngine VM? Best Regards, Strahil NikolovOn Feb 26, 2019 05:50, kiv(a)intercom.pro wrote: > > The crown icon on the left of the second host is gray. When I try to migrate the engine, I get the error: > > Migration of VM 'HostedEngine' to host 'ovirt2' failed: VM destroyed during the startup > EVENT_ID: VM_MIGRATION_NO_VDS_TO_MIGRATE_TO(166), No available host was found to migrate VM HostedEngine to. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/NHG7MBNCPYM...

6 years, 2 months

3
2
0 / 0

Python-SDK4- Issue following links

by Don Dupuis

Hi I am trying to write some code to update the names of existing vnicprofiles in ovirt-4.2. The problem I am having is trying to follow the links to the vnicprofiles. Below is web info that I am trying to get: <network href="/ovirt-engine/api/networks/740cae1f-c49f-4563-877a-5ce173e83be4" id="740cae1f-c49f-4563-877a-5ce173e83be4"><name>ovirtmgmt</name><description>LOOKING</description><comment/><link href="/ovirt-engine/api/networks/740cae1f-c49f-4563-877a-5ce173e83be4/permissions" rel="permissions"/><link href="/ovirt-engine/api/networks/740cae1f-c49f-4563-877a-5ce173e83be4/vnicprofiles" rel="vnicprofiles"/><link href="/ovirt-engine/api/networks/740cae1f-c49f-4563-877a-5ce173e83be4/networklabels" rel="networklabels"/><mtu>0</mtu><stp>false</stp><usages><usage>vm</usage></usages><vlan id="4050"/><data_center href="/ovirt-engine/api/datacenters/1d00d32b-abdc-43cd-b990-257aaf01d514" id="1d00d32b-abdc-43cd-b990-257aaf01d514"/></network> Below is the code that I am trying to do the same thing and I want to follow the vnicprofiles link to get to the actual data that I want to change: #!/usr/bin/env python import logging import time import string import sys import os import MySQLdb import ovirtsdk4 as sdk import ovirtsdk4.types as types #logging.basicConfig(level=logging.DEBUG, filename='/tmp/addhost.log') ### Variables to be used ### #NUMANODE = 3 #MEM = 20 GB = 1024 * 1024 * 1024 #MEMORY = MEM * GB GB = 1024 * 1024 * 1024 URL = 'https://host/ovirt-engine/api' CAFILE = '/etc/pki/ovirt-engine/ca.pem' USERNAME = 'admin@internal' PASSWORD = 'password' HOSTNAME = 'rvs06' connection = sdk.Connection( url=URL, username=USERNAME, password=PASSWORD, # ca_file='ca.pem', debug='True', insecure='True', # log=logging.getLogger(), ) #dcs_service = connection.system_service().data_centers_service() #dc = dcs_service.list(search='cluster=%s-local' % HOSTNAME)[0] #network = dcs_service.service(dc.id).networks_service() networks_service = connection.system_service().networks_service() network = networks_service.list( search='name=ovirtmgmt and datacenter=%s-local' % HOSTNAME) [0] print ("Network name is %s" % network.name) print ("Network id is %s" % network.id) vnic = connection.follow_link(network.vnicprofiles) connection.close() Below is the output of my code: ./update-vnic.py Network name is ovirtmgmt Network id is 740cae1f-c49f-4563-877a-5ce173e83be4 Traceback (most recent call last): File "./update-vnic.py", line 46, in <module> vnic = connection.follow_link(network.vnicprofiles) AttributeError: 'Network' object has no attribute 'vnicprofiles' The network name and network id is correct. Any help would be appreciated on what I am missing or what I am doing wrong. The actual updating of the name with code isn't written yet as I can't get past this part. Thanks Don

6 years, 2 months

2
7
0 / 0

Unrecognized message received error when ISO domain is put in Maintenance

by Wood Peter

Hi all, We are running oVirt 4.1.1 on engine and nodes. The ISO storage domain is NFS. Everything has been working great for years. Now I need to move the ISO and Export domains to a different storage server. When I put the ISO domain in maintenance the Master domain and the Export domain start flipping active-non active. The Events tab in the Web UI shows this message scrolling every 30 sec. or so: "Datacenter is being initialized. Please wait for initialization to complete" ... but it never completes. It also starts cycling the SPM assignment from one node to another. As soon as I activate back the ISO domain everything calms down and no more errors are recorded in the logs. In engine.log I see this "Unrecognized message received" error: 2019-02-25 19:45:20,467-08 ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) [] Unable to process messages Unrecognized message received 2019-02-25 19:45:20,481-08 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler6) [76363b98] EVENT_ID: IRS_BROKER_COMMAND_FAILURE(10,803), Correlation ID: null, Call Stack: null, Custom E vent ID: -1, Message: VDSM command GetStoragePoolInfoVDS failed: Unrecognized message received 2019-02-25 19:45:20,481-08 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (DefaultQuartzScheduler6) [76363b98] ERROR, org.ovirt.engine.core.vdsbroker.irsbroker.GetStoragePoolInfoVDSCommand, exception: VDSGenericExce ption: VDSNetworkException: Unrecognized message received , log id: 1635c439 2019-02-25 19:45:20,481-08 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (DefaultQuartzScheduler6) [76363b98] Exception: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: VDSGenericException: VDSNetwor kException: Unrecognized message received In vdsm.log on the nodes I see this: 2019-02-25 19:45:29,817-0800 ERROR (upgrade/b5b7a10) [storage.StoragePool] Unhandled exception (utils:371) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 368, in wrapper return f(*a, **kw) File "/usr/lib/python2.7/site-packages/vdsm/concurrent.py", line 180, in run return func(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/storage/securable.py", line 79, in wrapper return method(self, *args, **kwargs) File "/usr/share/vdsm/storage/sp.py", line 232, in _upgradePoolDomain self._finalizePoolUpgradeIfNeeded() File "/usr/lib/python2.7/site-packages/vdsm/storage/securable.py", line 77, in wrapper raise SecureError("Secured object is not in safe state") SecureError: Secured object is not in safe state And I believe that after that error it moves the SPM to another host, gets the same error and continues moving it to the next host and so on. I really need to move the ISO and Export domains to a different storage server. Any idea what is causing this or how to fix it? Appreciate any help. Thanks, -- Peter

6 years, 2 months

1
0
0 / 0

/boot partition of oVirt node missing after reboot

by andy.law＠hactlsolutions.com

I've installed oVirt Node 4.2 on one of my servers. Recently I've upgraded the kernel version to 3.10.0-957.5.1.el7.x86_64. After such update, I've rebooted the server to take effect and then the /boot partition cannot be recognized. The server then enters emergency mode and I've tried to run the command blkid but I cannot find the uuid of /boot and /boot/efi. Before reboot: # blkid /dev/mapper/onn-var_crash: UUID="2aa920d6-c2d2-4313-8df1-8be16a5718ae" TYPE="ext4" /dev/mapper/3600508b1001cede21ec59eb753184259p3: UUID="Vy9K1K-e4uI-oM73-blSV-eU29-FnZP-3FIh4Y" TYPE="LVM2_member" PARTUUID="57cfd006-60d0-4826-8f58-6d11d4e1cb94" /dev/mapper/3600508b1001cede21ec59eb753184259p1: SEC_TYPE="msdos" UUID="7408-0A3B" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="56cadb64-9099-4ec8-9c0c-94596c80b2a9" /dev/mapper/3600508b1001cede21ec59eb753184259p2: UUID="3e920048-3b2e-4c09-b507-c9debe7d98f0" TYPE="ext4" PARTUUID="9ee53bdd-3051-443b-960f-9801d7245d33" /dev/mapper/onn-ovirt--node--ng--4.2.7.1--0.20181219.0+1: UUID="111ed68a-a7e8-4b17-8add-5c8fd9035bbc" TYPE="ext4" /dev/mapper/onn-swap: UUID="0fcbdcfe-92da-43d4-a773-ef6f7dac0556" TYPE="swap" /dev/mapper/onn-var_log_audit: UUID="48531956-48cc-4faa-9dfc-e7baaab89b3b" TYPE="ext4" /dev/mapper/onn-var_log: UUID="15c57452-0333-4a9a-a8e6-220155e819b3" TYPE="ext4" /dev/mapper/onn-var: UUID="772613a5-be4f-4044-8b95-c846852f5421" TYPE="ext4" /dev/mapper/onn-tmp: UUID="1ee263bf-9dcb-46e8-92f7-f21a8c87eeb5" TYPE="ext4" /dev/mapper/onn-home: UUID="738d2e6f-d7e0-4d3a-acc0-6db1392a0222" TYPE="ext4" /dev/sdc: UUID="e2pRkW-V1Vd-XxqK-5PBK-5Vtb-8Mgr-YjgB1M" TYPE="LVM2_member" /dev/mapper/360060e80122ed80050402ed800000a00: UUID="e2pRkW-V1Vd-XxqK-5PBK-5Vtb-8Mgr-YjgB1M" TYPE="LVM2_member" /dev/sdd: UUID="WlBAsN-q2YR-vYGL-Syx4-HJ30-CbVk-v2Q7yt" TYPE="LVM2_member" /dev/mapper/360060e80122ed80050402ed800000a01: UUID="WlBAsN-q2YR-vYGL-Syx4-HJ30-CbVk-v2Q7yt" TYPE="LVM2_member" /dev/sde: UUID="e2pRkW-V1Vd-XxqK-5PBK-5Vtb-8Mgr-YjgB1M" TYPE="LVM2_member" /dev/sdf: UUID="WlBAsN-q2YR-vYGL-Syx4-HJ30-CbVk-v2Q7yt" TYPE="LVM2_member" /dev/mapper/c0d0ef19--826b--44d7--a380--658adb915964-master: UUID="a409bf9f-63b6-42ac-8759-038f1bc3337f" TYPE="ext3" /dev/mapper/e399fd7f--c884--4e3d--89cf--7d8ddae16058-master: UUID="887319bd-d3e4-4dfe-9f8c-3e4ee2498ccb" SEC_TYPE="ext2" TYPE="ext3" /dev/mapper/3600508b1001cede21ec59eb753184259: PTTYPE="gpt" /dev/sdb: PTTYPE="gpt" /dev/mapper/c0d0ef19--826b--44d7--a380--658adb915964-a72e9370--0649--4e6f--b10a--1015b6b2134f: PTTYPE="dos" #cat /etc/fstab /dev/onn/ovirt-node-ng-4.2.7.1-0.20181219.0+1 / ext4 defaults,discard 1 1 UUID=3e920048-3b2e-4c09-b507-c9debe7d98f0 /boot ext4 defaults 1 2 UUID=7408-0A3B /boot/efi vfat umask=0077,shortname=winnt 0 0 /dev/mapper/onn-home /home ext4 defaults,discard 1 2 /dev/mapper/onn-tmp /tmp ext4 defaults,discard 1 2 /dev/mapper/onn-var /var ext4 defaults,discard 1 2 /dev/mapper/onn-var_log /var/log ext4 defaults,discard 1 2 /dev/mapper/onn-var_log_audit /var/log/audit ext4 defaults,discard 1 2 /dev/mapper/onn-swap swap swap defaults 0 0 Any ideas what caused this?

6 years, 2 months

1
0
0 / 0

Stuck completing last step of 4.3 upgrade

by Jayme

Environment setup: 3 Host HCI GlusterFS setup. Identical hosts, Dell R720s w/ Intel E5-2690 CPUs 1 default data center (4.2 compat) 1 default cluster (4.2 compat) Situation: I recently upgraded my three node HCI cluster from Ovirt 4.2 to 4.3. I did so by first updating the engine to 4.3 then upgrading each ovirt-node host to 4.3 and rebooting. Currently engine and all hosts are running 4.3 and all is working fine. To complete the upgrade I need to update cluster compatibility to 4.3 and then data centre to 4.3. This is where I am stuck. The CPU type on cluster is "Intel SandyBridge IBRS Family". This option is no longer available if I select 4.3 compatibility. Any other option chosen such as SandyBridge IBRS SSBD will not allow me to switch to 4.3 as all hosts must be in maintenance mode (which is not possible w/ self hosted engine). I saw another post about this where someone else followed steps to create a second cluster on 4.3 with new CPU type then move one host to it, start engine on it then perform other steps to eventually get to 4.3 compatibility. I tried to add a 4.3 cluster with gluster service and put one of my hosts in to maintenance mode but could not move it to the new cluster, it gave me an error about the host having gluster service. If I try to import gluster config in cluster add UI it fails in engine log with "SERVER_ALREADY_EXISTS_IN_ANOTHER_CLUSTER" My question is, what is the proper procedure for me to complete upgrading my three node HCI environment to 4.3 cluster compatibility along with changing CPU type? Do I really need to create a second cluster and move host(s) to it? If so how can I move an existing host with running gluster service to a new cluster? Thanks in advance!

6 years, 2 months

7
20
0 / 0

Re: Problem deploying self-hosted engine on ovirt 4.3.0

by Strahil

Your /var/tmp is full. Clean it up a little bit and give it a try. Best Regards, Strahil Nikolov

6 years, 2 months

1
0
0 / 0

Re: Ovirt Glusterfs

by Strahil

Hi Sahina, Thanks for your reply. Let me share my test results with gluster v3 . I have a 3-node hyperconverged setup with 1 Gbit/s network and SSD (sata-based) for LVM caching. Testing the bricks showed higher than the network performance. 1. Tested ovirt 4.2.7/4.2.8 with fuse mounts. Using 'dd if=/dev/zero of=/default/gluster/Mount point/from/ovirt bs=1M count=5000'. Results: 56MB/s directly on the mount point, 20+-2 MB/s from a VM. Reads on fuse mount point -> 500+ MB/s Disabling sharing increased performance from the fuse mount point, nothing beneficial from a VM. Converting the bricks of a volume to 'tmpfs' does not bring any performance gain for FUSE mount. 2. Tested ovirt 4.2.7/4.2.8 with gfapi - performance in VM -> approx 30 MB/s 3. Gluster native NFS (now deprecated) on ovirt 4.2.7/4.2.8 -> 120MB/s on mount point, 100+ MB/s in VM My current setup: Storhaug + ctdb + nfs-ganesha (ovirt 4.2.7/4.2.8) -> 80+-2 MB/s in the VM. Reads are around the same speed. Sadly, I didn't have the time to test performance on gluster v5 (ovirt 4.3.0) , but I haven't noticed any performance gain for the engine. My suspicion with FUSE is that when a gluster node is also playing the role of a client -> it still uses network bandwidth to communicate to itself, but I could be wrong. According to some people on the gluster lists, the FUSE performance is expected ,but my tests with disabled sharing shows better performance. Most of the time 'gtop' does not show any spikes and iftop shows that network usage is not going over 500 Mbit/s As I hit some issues with the deployment on 4.2.7 , I decided to stop my tests for now. Best Regards, Strahil Nikolov On Feb 25, 2019 09:17, Sahina Bose <sabose(a)redhat.com> wrote: > > The options set on the gluster volume are tuned for data consistency and reliability. > > Some of the changes that you can try > 1. use gfapi - however this will not provide you HA if the server used to access the gluster volume is down. (the backup-volfile-servers are not used in case of gfapi). You can change this using the engine-config tool for your cluster level. > 2. Change the remote-dio:enable to turn on client side brick caching. Ensure that you have a power backup in place, so that you don't end up with data loss in case server goes down before data is flushed. > > If you're seeing issues with a particular version of glusterfs, please provide gluster profile output for us to help identify bottleneck. (check https://docs.gluster.org/en/latest/Administrator%20Guide/Monitoring%20Wor... on how to do this) > > On Fri, Feb 22, 2019 at 1:39 PM Sandro Bonazzola <sbonazzo(a)redhat.com> wrote: >> >> Adding Sahina >> >> Il giorno ven 22 feb 2019 alle ore 06:51 Strahil <hunter86_bg(a)yahoo.com> ha scritto: >>> >>> I have done some testing and it seems that storhaug + ctdb + nfs-ganesha is showing decent performance in a 3 node hyperconverged setup. >>> Fuse mounts are hitting some kind of limit when mounting gluster -3.12.15 volumes. >>> >>> Best Regards, >>> Strahil Nikolov >>> >>> _______________________________________________ >>> Users mailing list -- users(a)ovirt.org >>> To unsubscribe send an email to users-leave(a)ovirt.org >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/7U5J4KYDJJS... >> >> >> >> -- >> >> SANDRO BONAZZOLA >> >> MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV >> >> Red Hat EMEA >> >> sbonazzo(a)redhat.com

6 years, 2 months

1
0
1 / 0

HC : JBOD or RAID5/6 for NVME SSD drives?

by Guillaume Pavese

Hi, We have been evaluating oVirt HyperConverged for 9 month now with a test cluster of 3 DELL Hosts with Hardware RAID5 on PERC card. We were not impressed with the performance... No SSD for LV Cache on these hosts but I tried anyway with LV Cache on a ram device. Perf were almost unchanged. It seems that LV Cache is its own source of bugs and problems anyway, so we are thinking going for full NVME drives when buying the production cluster. What would the recommandation be in that case, JBOD or RAID? Thanks Guillaume Pavese Ingénieur Système et Réseau Interactiv-Group

6 years, 2 months

3
3
0 / 0

Re: HostedEngine Unreachable

by Simone Tiraboschi

On Mon, Feb 25, 2019 at 2:53 PM Sakhi Hadebe <sakhi(a)sanren.ac.za> wrote: > Hi Simone, > > The name resolution is working fine. > > Running: > getent ahosts engine.sanren.ac.za > > gives the same output: > > 192.168.x.x STREAM engine.sanren.ac.za > 192.168.x.x DGRAM > 192.168.x.x RAW > The IP address being the engine IP Address. > > The hosts are on the same subnet as the HostedEngine. I can ping the hosts > from each other. There is a NATting device, that NATs the private IP > addresses to public IP addresses. From the hosts I can reach the internet, > but I cant ping from outside (security measure). We also using this device > to VPN to the cluster > > *[root@gohan ~]# virsh -r list* > * Id Name State* > *----------------------------------------------------* > * 13 HostedEngine running* > > *[root@gohan ~]# virsh -r dumpxml HostedEngine | grep -i tlsPort > <graphics type='spice' port='5901' tlsPort='5902' autoport='yes' > listen='192.168.x.x' passwdValidTo='1970-01-01T00:00:01'>* > > *[root@gohan ~]# virsh -r vncdisplay HostedEngine* > *192.168.x.x:0* > > *[root@gohan ~]# hosted-engine --add-console-password* > *Enter password:* > > *You can now connect the hosted-engine VM with VNC at 192.168.x.x:5900* > > VNCing with the above gives me the blank black screen and a cursor (See > attached). I cant do anything on that screen. > OK, I can suggest to to power off the engine VM with hosted-engine --vm-poweroff and then start it again with hosted-engine --vm-start in order to follow the whole boot process over VNC > > > Please help > > > > On Mon, Feb 25, 2019 at 11:34 AM Simone Tiraboschi <stirabos(a)redhat.com> > wrote: > >> >> >> On Mon, Feb 25, 2019 at 10:27 AM Sakhi Hadebe <sakhi(a)sanren.ac.za> wrote: >> >>> Hi Simone, >>> >>> Thank you for your response. Executing the command below, gives this: >>> >>> [root@ovirt-host]# curl http://$(grep fqdn /etc/ovirt-hosted-engine/hosted-engine.conf >>> | cut -d= -f2)/ovirt-engine/services/health >>> curl: (7) Failed to connect to engine.sanren.ac.za:80; No route to host >>> >>> I tried to enable http traffic on the ovirt-host, but the error persists >>> >> >> Run, on your hosts, >> getent ahosts engine.sanren.ac.za >> >> and ensure that it got resolved as you wish. >> Fix name resolution and routing on your hosts in a coherent manner. >> >> > > -- > Regards, > Sakhi Hadebe > > Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR > > Tel: +27 12 841 2308 <+27128414213> > Fax: +27 12 841 4223 <+27128414223> > Cell: +27 71 331 9622 <+27823034657> > Email: sakhi(a)sanren.ac.za <shadebe(a)csir.co.za> > >

6 years, 2 months

1
0
0 / 0

[oVirt 4.3.1 Test Day] cmdline HE Deployment

by Guillaume Pavese

He deployment with "hosted-engine --deploy" fails at TASK [ovirt.hosted_engine_setup : Get local VM IP] See following Error : 2019-02-25 12:46:50,154+0100 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 TASK [ovirt.hosted_engine_setup : Get local VM IP] 2019-02-25 12:55:26,823+0100 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:103 {u'_ansible_parsed': True, u'stderr_lines': [], u'cmd': u"virsh -r net-dhcp-leases default | grep -i 00 :16:3e:3e:fe:28 | awk '{ print $5 }' | cut -f1 -d'/'", u'end': u'2019-02-25 12:55:26.666925', u'_ansible_no_log': False, u'stdout': u'', u'changed': True, u'invocation': {u'module_args': {u'warn': True, u'executable': None, u'_uses_shell': True, u'_raw_params': u"virsh -r net-dhcp-leases default | grep -i 00:16:3e:3e:fe:28 | awk '{ print $5 }' | cut -f1 -d'/'", u'removes': None, u'argv': None, u'creates': None, u'chdir': None, u'std in': None}}, u'start': u'2019-02-25 12:55:26.584686', u'attempts': 50, u'stderr': u'', u'rc': 0, u'delta': u'0:00:00.082239', u'stdout_lines': []} 2019-02-25 12:55:26,924+0100 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:107 fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:3e:fe:28 | awk '{ print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.082239", "end": "2019-02-25 12:55:26.666925", "rc": 0, "start": "2019-02-25 12:55:26.584686", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} Guillaume Pavese Ingénieur Système et Réseau Interactiv-Group

6 years, 2 months

3
5
0 / 0

Gluster - performance.strict-o-direct and other performance tuning in different storage backends

by Leo David

Hello Everyone, As per some previous posts, this "performance.strict-o-direct=on" setting caused trouble or poor vm iops. I've noticed that this option is still part of default setup or automatically configured with "Optimize for virt. store" button. In the end... is this setting a good or a bad practice for setting the vm storage volume ? Does it depends ( like maybe other gluster performance options ) on the storage backend: - raid type / jbod - raid controller cache size I am usually using jbod disks attached to lsi hba card ( no cache ). Any gluster recommendations regarding this setup ? Is there any documentation for best practices on configurating ovirt's gluster for different types of storage backends ? Thank you very much ! Have a great week, Leo -- Best regards, Leo David

6 years, 2 months

2
2
1 / 0

Problem deploying self-hosted engine on ovirt 4.3.0

by matteo fedeli

after several attempts I managed to install and deploying the ovel gluster but during the self-hosted engine deploy stuck on [INFO] TASK ["oVirt.engine-setup: Install oVirt Engine package"] for 30 minutes ... How to safely interrupt ? I let it go on while I look at some logs?

6 years, 2 months

2
4
0 / 0

[oVirt 4.3.1 Test Day] Cockpit HE Deployment

by Guillaume Pavese

As indicated on Trello, HE deployment though cockpit is stuck at the beginning with "Please correct errors before moving to next step", but no Error is explicitly shown or highlighted. Guillaume Pavese Ingénieur Système et Réseau Interactiv-Group

6 years, 2 months

1
0
0 / 0

Unable to change cluster and data center compatibility version

by Jonathan Mathews

Good Day I have been trying to upgrade a clients oVirt from 3.6 to 4.0 but have run into an issue where I am unable to change the cluster and data center compatibility version. I get the following error in the GUI: Ovirt: Some of the hosts still use legacy protocol which is not supported by cluster 3.6 or higher. In order to change it a host needs to be put to maintenance and edited in advanced options section. This error was received with all VM's off and all hosts in maintenance. The environment has the following currently installed: Engine - CentOS 7.4 - Ovirt Engine 3.6.7.5 Host1 - CentOS 6.9 - VDSM 4.16.30 Host2 - CentOS 6.9 - VDSM 4.16.30 Host3 - CentOS 6.9 - VDSM 4.16.30 I also have the following from engine.log [root@ovengine ~]# tail -f /var/log/ovirt-engine/engine.log 2018-09-22 07:11:33,920 INFO [org.ovirt.engine.core.vdsbroker.VmsStatisticsFetcher] (DefaultQuartzScheduler_Worker-93) [7533985f] Fetched 0 VMs from VDS 'd82a026c-31b4-4efc-8567-c4a6bdcaa826' 2018-09-22 07:11:34,685 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DisconnectStoragePoolVDSCommand] (DefaultQuartzScheduler_Worker-99) [4b7e3710] FINISH, DisconnectStoragePoolVDSCommand, log id: 1ae6f0a9 2018-09-22 07:11:34,687 INFO [org.ovirt.engine.core.bll.storage.DisconnectHostFromStoragePoolServersCommand] (DefaultQuartzScheduler_Worker-99) [2a6aa6f6] Running command: DisconnectHostFromStoragePoolServersCommand internal: true. Entities affected : ID: 5849b030-626e-47cb-ad90-3ce782d831b3 Type: StoragePool 2018-09-22 07:11:34,706 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DisconnectStorageServerVDSCommand] (DefaultQuartzScheduler_Worker-99) [2a6aa6f6] START, DisconnectStorageServerVDSCommand(HostName = ovhost3, StorageServerConnectionManagementVDSParameters:{runAsync='true', hostId='d82a026c-31b4-4efc-8567-c4a6bdcaa826', storagePoolId='5849b030-626e-47cb-ad90-3ce782d831b3', storageType='NFS', connectionList='[StorageServerConnections:{id='3fdffb4c-250b-4a4e-b914-e0da1243550e', connection='172.16.0.10:/raid0/data/_NAS_NFS_Exports_/STORAGE1', iqn='null', vfsType='null', mountOptions='null', nfsVersion='null', nfsRetrans='null', nfsTimeo='null', iface='null', netIfaceName='null'}, StorageServerConnections:{id='4d95c8ca-435a-4e44-86a5-bc7f3a0cd606', connection='172.16.0.20:/data/ov-export', iqn='null', vfsType='null', mountOptions='null', nfsVersion='null', nfsRetrans='null', nfsTimeo='null', iface='null', netIfaceName='null'}, StorageServerConnections:{id='82ecbc89-bdf3-4597-9a93-b16f3a6ac117', connection='172.16.0.11:/raid1/data/_NAS_NFS_Exports_/4TB', iqn='null', vfsType='null', mountOptions='null', nfsVersion='null', nfsRetrans='null', nfsTimeo='null', iface='null', netIfaceName='null'}, StorageServerConnections:{id='29bb3394-fb61-41c0-bb5a-1fa693ec2fe2', connection='172.16.0.11:/raid1/data/_NAS_NFS_Exports_/iso', iqn='null', vfsType='null', mountOptions='null', nfsVersion='V3', nfsRetrans='null', nfsTimeo='null', iface='null', netIfaceName='null'}]'}), log id: 48c5ffd6 2018-09-22 07:11:34,991 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DisconnectStorageServerVDSCommand] (DefaultQuartzScheduler_Worker-99) [2a6aa6f6] FINISH, DisconnectStorageServerVDSCommand, return: {3fdffb4c-250b-4a4e-b914-e0da1243550e=0, 29bb3394-fb61-41c0-bb5a-1fa693ec2fe2=0, 82ecbc89-bdf3-4597-9a93-b16f3a6ac117=0, 4d95c8ca-435a-4e44-86a5-bc7f3a0cd606=0}, log id: 48c5ffd6 2018-09-22 07:11:56,367 WARN [org.ovirt.engine.core.bll.UpdateVdsGroupCommand] (default task-29) [1a31cc53] CanDoAction of action 'UpdateVdsGroup' failed for user admin@internal. Reasons: VAR__TYPE__CLUSTER,VAR__ACTION__UPDATE,ACTION_TYPE_FAILED_WRONG_PROTOCOL_FOR_CLUSTER_VERSION 2018-09-22 07:12:41,017 WARN [org.ovirt.engine.core.bll.storage.UpdateStoragePoolCommand] (default task-29) [efd285b] CanDoAction of action 'UpdateStoragePool' failed for user admin@internal. Reasons: VAR__TYPE__STORAGE__POOL,VAR__ACTION__UPDATE,$ClustersList Default,ERROR_CANNOT_UPDATE_STORAGE_POOL_COMPATIBILITY_VERSION_BIGGER_THAN_CLUSTERS 2018-09-22 07:13:15,717 WARN [org.ovirt.engine.core.bll.UpdateVdsGroupCommand] (default task-6) [4c9f3ee8] CanDoAction of action 'UpdateVdsGroup' failed for user admin@internal. Reasons: VAR__TYPE__CLUSTER,VAR__ACTION__UPDATE,ACTION_TYPE_FAILED_WRONG_PROTOCOL_FOR_CLUSTER_VERSION 2018-09-22 07:15:21,460 WARN [org.ovirt.engine.core.bll.UpdateVdsGroupCommand] (default task-28) [649bae65] CanDoAction of action 'UpdateVdsGroup' failed for user admin@internal. Reasons: VAR__TYPE__CLUSTER,VAR__ACTION__UPDATE,ACTION_TYPE_FAILED_WRONG_PROTOCOL_FOR_CLUSTER_VERSION 2018-09-22 07:18:44,633 WARN [org.ovirt.engine.core.bll.UpdateVdsGroupCommand] (default task-8) [23167cfd] CanDoAction of action 'UpdateVdsGroup' failed for user admin@internal. Reasons: VAR__TYPE__CLUSTER,VAR__ACTION__UPDATE,ACTION_TYPE_FAILED_WRONG_PROTOCOL_FOR_CLUSTER_VERSION 2018-09-22 07:24:20,372 WARN [org.ovirt.engine.core.bll.UpdateVdsGroupCommand] (default task-15) [5d2ce633] CanDoAction of action 'UpdateVdsGroup' failed for user admin@internal. Reasons: VAR__TYPE__CLUSTER,VAR__ACTION__UPDATE,ACTION_TYPE_FAILED_WRONG_PROTOCOL_FOR_CLUSTER_VERSION I would appreciate some advice in resolving this. Thanks

6 years, 2 months

3
5
0 / 0

Problem with snapshots in illegal status

by Bruno Rodriguez

Hello, We are experiencing some problems with some snapshots in illegal status generated with the python API. I think I'm not the only one, and that is not a relief but I hope someone can help about it. I'm a bit scared because, for what I see, the creation date in the engine for every snapshot is way different from the date when it was really created. The name of the snapshot is in the format backup_snapshot_YYYYMMDD-HHMMSS, but as you can see in the following examples, the stored date is totally random... Size Creation Date Snapshot Description Status Disk Snapshot ID 33 GiB Mar 2, 2018, 5:03:57 PM backup_snapshot_20190217-011645 Illegal 5734df23-de67-41a8-88a1-423cecfe7260 33 GiB May 8, 2018, 10:02:56 AM backup_snapshot_20190216-013047 Illegal f649d9c1-563e-49d4-9fad-6bc94abc279b 10 GiB Feb 21, 2018, 11:10:17 AM backup_snapshot_20190217-010004 Illegal 2929df28-eae8-4f27-afee-a984fe0b07e7 43 GiB Feb 2, 2018, 12:55:51 PM backup_snapshot_20190216-015544 Illegal 4bd4360e-e0f4-4629-ab38-2f0d80d3ae0f 11 GiB Feb 13, 2018, 12:51:08 PM backup_snapshot_20190217-010541 Illegal fbaff53b-30ce-4b20-8f10-80e70becb48c 11 GiB Feb 13, 2018, 4:05:39 PM backup_snapshot_20190217-011207 Illegal c628386a-da6c-4a0d-ae7d-3e6ecda27d6d 11 GiB Feb 13, 2018, 4:38:25 PM backup_snapshot_20190216-012058 Illegal e9ddaa5c-007d-49e6-8384-efefebb00aa6 11 GiB Feb 13, 2018, 10:52:09 AM backup_snapshot_20190216-012550 Illegal 5b6db52a-bfe3-45f8-b7bb-d878c4e63cb4 55 GiB Jan 22, 2018, 5:02:29 PM backup_snapshot_20190217-012659 Illegal 7efe2e7e-ca24-4b27-b512-b42795c79ea4 When I'm getting the logs for the first one, to check what happened to it, I get the following 2019-02-17 01:16:45,839+01 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.CreateVolumeVDSCommand] (default task-100) [96944daa-c90a-4ad7-a556-c98e66550f87] START, CreateVolumeVDSCommand( CreateVolumeVDSCommandParameters:{storagePoolId='fa64792e-73b3-4da2-9d0b-f334422aaccf', ignoreFailoverLimit='false', storageDomainId='e655abce-c5e8-44f3-8d50-9fd76edf05cb', imageGroupId='c5cc464e-eb71-4edf-a780-60180c592a6f', imageSizeInBytes='32212254720', volumeFormat='COW', newImageId='fa154782-0dbb-45b5-ba62-d6937259f097', imageType='Sparse', newImageDescription='', imageInitialSizeInBytes='0', imageId='5734df23-de67-41a8-88a1-423cecfe7260', sourceImageGroupId='c5cc464e-eb71-4edf-a780-60180c592a6f'}), log id: 497c168a 2019-02-17 01:18:26,506+01 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVolumeInfoVDSCommand] (default task-212) [19f00d3e-5159-48aa-b3a0-615a085b62d9] START, GetVolumeInfoVDSCommand(HostName = hood13.pic.es, GetVolumeInfoVDSCommandParameters:{hostId='0a774472-5737-4ea2-b49a-6f0ea4572199', storagePoolId='fa64792e-73b3-4da2-9d0b-f334422aaccf', storageDomainId='e655abce-c5e8-44f3-8d50-9fd76edf05cb', imageGroupId='c5cc464e-eb71-4edf-a780-60180c592a6f', imageId='5734df23-de67-41a8-88a1-423cecfe7260'}), log id: 111a34cf 2019-02-17 01:18:26,764+01 INFO [org.ovirt.engine.core.bll.storage.disk.image.TransferDiskImageCommand] (default task-212) [19f00d3e-5159-48aa-b3a0-615a085b62d9] Successfully added Download disk 'vm.example.com_Disk1' (id '5734df23-de67-41a8-88a1-423cecfe7260') for image transfer command '11104d8c-2a9b-4924-96ce-42ef66725616' 2019-02-17 01:18:27,310+01 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.AddImageTicketVDSCommand] (default task-212) [19f00d3e-5159-48aa-b3a0-615a085b62d9] START, AddImageTicketVDSCommand(HostName = hood11.pic.es, AddImageTicketVDSCommandParameters:{hostId='79cbda85-35f4-44df-b309-01b57bc2477e', ticketId='0d389c3e-5ea5-4886-8ea7-60a1560e3b2d', timeout='300', operations='[read]', size='35433480192', url='file:///rhev/data-center/mnt/blockSD/e655abce-c5e8-44f3-8d50-9fd76edf05cb/images/c5cc464e-eb71-4edf-a780-60180c592a6f/5734df23-de67-41a8-88a1-423cecfe7260', filename='null'}), log id: f5de141 2019-02-17 01:22:28,898+01 INFO [org.ovirt.engine.core.bll.storage.disk.image.TransferDiskImageCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-100) [19f00d3e-5159-48aa-b3a0-615a085b62d9] Renewing transfer ticket for Download disk 'vm.example.com_Disk1' (id '5734df23-de67-41a8-88a1-423cecfe7260') 2019-02-17 01:26:33,588+01 INFO [org.ovirt.engine.core.bll.storage.disk.image.TransferDiskImageCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-100) [19f00d3e-5159-48aa-b3a0-615a085b62d9] Renewing transfer ticket for Download disk 'vm.example.com_Disk1' (id '5734df23-de67-41a8-88a1-423cecfe7260') 2019-02-17 01:26:49,319+01 INFO [org.ovirt.engine.core.bll.storage.disk.image.TransferDiskImageCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-6) [19f00d3e-5159-48aa-b3a0-615a085b62d9] Finalizing successful transfer for Download disk 'vm.example.com_Disk1' (id '5734df23-de67-41a8-88a1-423cecfe7260') 2019-02-17 01:27:17,771+01 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-6) [19f00d3e-5159-48aa-b3a0-615a085b62d9] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), VDSM hood11.pic.es command TeardownImageVDS failed: Cannot deactivate Logical Volume: ('General Storage Exception: ("5 [] [\' Logical volume e655abce-c5e8-44f3-8d50-9fd76edf05cb/5734df23-de67-41a8-88a1-423cecfe7260 in use.\', \' Logical volume e655abce-c5e8-44f3-8d50-9fd76edf05cb/fa154782-0dbb-45b5-ba62-d6937259f097 in use.\']\\ne655abce-c5e8-44f3-8d50-9fd76edf05cb/[\'5734df23-de67-41a8-88a1-423cecfe7260\', \'fa154782-0dbb-45b5-ba62-d6937259f097\']",)',) 2019-02-17 01:27:17,772+01 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.TeardownImageVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-6) [19f00d3e-5159-48aa-b3a0-615a085b62d9] Command 'TeardownImageVDSCommand(HostName = hood11.pic.es, ImageActionsVDSCommandParameters:{hostId='79cbda85-35f4-44df-b309-01b57bc2477e'})' execution failed: VDSGenericException: VDSErrorException: Failed in vdscommand to TeardownImageVDS, error = Cannot deactivate Logical Volume: ('General Storage Exception: ("5 [] [\' Logical volume e655abce-c5e8-44f3-8d50-9fd76edf05cb/5734df23-de67-41a8-88a1-423cecfe7260 in use.\', \' Logical volume e655abce-c5e8-44f3-8d50-9fd76edf05cb/fa154782-0dbb-45b5-ba62-d6937259f097 in use.\']\\ne655abce-c5e8-44f3-8d50-9fd76edf05cb/[\'5734df23-de67-41a8-88a1-423cecfe7260\', \'fa154782-0dbb-45b5-ba62-d6937259f097\']",)',) 2019-02-17 01:27:19,204+01 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MergeVDSCommand] (EE-ManagedThreadFactory-commandCoordinator-Thread-6) [e73bfbec-d6bd-40e5-8009-97e6005ad1d4] START, MergeVDSCommand(HostName = hood11.pic.es, MergeVDSCommandParameters:{hostId='79cbda85-35f4-44df-b309-01b57bc2477e', vmId='addd5eba-9078-41aa-9244-fe485aded951', storagePoolId='fa64792e-73b3-4da2-9d0b-f334422aaccf', storageDomainId='e655abce-c5e8-44f3-8d50-9fd76edf05cb', imageGroupId='c5cc464e-eb71-4edf-a780-60180c592a6f', imageId='fa154782-0dbb-45b5-ba62-d6937259f097', baseImageId='5734df23-de67-41a8-88a1-423cecfe7260', topImageId='fa154782-0dbb-45b5-ba62-d6937259f097', bandwidth='0'}), log id: 1d956d48 2019-02-17 01:27:29,923+01 INFO [org.ovirt.engine.core.bll.storage.disk.image.TransferDiskImageCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-49) [19f00d3e-5159-48aa-b3a0-615a085b62d9] Transfer was successful. Download disk 'vm.example.com_Disk1' (id '5734df23-de67-41a8-88a1-423cecfe7260') 2019-02-17 01:27:30,997+01 INFO [org.ovirt.engine.core.bll.storage.disk.image.TransferDiskImageCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-46) [19f00d3e-5159-48aa-b3a0-615a085b62d9] Successfully transferred disk '5734df23-de67-41a8-88a1-423cecfe7260' (command id '11104d8c-2a9b-4924-96ce-42ef66725616') For what I understand, there was a "Cannot deactivate logical volume" problem that I would thank very much if someone can help me about how to solve Thanks again -- Bruno Rodríguez Rodríguez "Si algo me ha enseñado el tetris, es que los errores se acumulan y los triunfos desaparecen"

6 years, 2 months

2
5
0 / 0

VM creation using python api specifying an appropriate timezone

by ckennedy288＠gmail.com

Hi, I'm looking for a way to accurately specify the timezone of a VM at VM creation time. At the moment all VMs that get created using a simple in-house python script are set with a GMT timezone e.g.: if ( "windows" in OS ): vm_tz="GMT Standard Time" else: vm_tz="Etc/GMT" Is there a better way to choose a more appropriate timezone based on the VMs global location? is there a way to get a list of ovirt supported time zones for Windows and Linux and compare that with the VMs location and OS type and then choose an appropriate timezone?

6 years, 2 months

1
0
0 / 0

Info about AD integration and Root CA

by Gianluca Cecchi

Hello, in docs for 4.2 RHV (I think it applies to oVirt 4.2 too) for attaching to AD there is the statement " To set up secure connection between the LDAP server and the Manager, ensure a PEM- encoded CA certificate has been prepared. See Section D.2, “Setting Up Encrypted Communication between the Manager and an LDAP Server” for more information. " and in Appendix " To set up encrypted communication between the Red Hat Virtualization Manager and an LDAP server, obtain the root CA certificate of the LDAP server. . . " and in readme file referred in the Appendix (/usr/share/doc/ovirt-engine-extension-aaa-ldap-1.3.8/README) there is the command: " Active Directory Windows: > certutil -ca.cert myrootca.der Linux: $ openssl -in myrootca.der -inform DER -out myrootca.pem " In my case on Windows DC (that is a Windows 2012 R2 server with "Domain functional level: Windows Server 2003") I get this error: C:\Users\Administrator.MYDOMAIN>certutil -ca.cert mydomain.der CertUtil: The system cannot find the file specified. C:\Users\Administrator.MYDOMAIN> What does it mean exactly? Thanks in advance, Gianluca

6 years, 2 months

2
2
0 / 0

HostedEngine Unreachable

by Sakhi Hadebe

Hi, Our cluster was running fine, until we moved it to the new network. Looking at the agent.log file, it stills pings the old gateway. Not sure if this is the reason it's failing the liveliness check. Please help. On Thu, Feb 21, 2019 at 4:39 PM Sakhi Hadebe <sakhi(a)sanren.ac.za> wrote: > Hi, > > I need some help. We had a working ovirt cluster in the testing > environment. We have just moved it to the production environment with the > same network settings. The only thing we changed is the public VLAN. In > production we're using a different subnet. > > The problem is we can't get the HostedEngine Up. It does come up but it > fails the LIVELINESS CHECK and its health status is bad. We can't ping even > ping it. It is on the same subnet as host machines: 192.168.x.x/24: > > *HostedEngine VM status:* > > [root@garlic qemu]# hosted-engine --vm-status > > > --== Host 1 status ==-- > > conf_on_shared_storage : True > Status up-to-date : True > Hostname : goku.sanren.ac.za > Host ID : 1 > Engine status : {"reason": "vm not running on this > host", "health": "bad", "vm": "down", "detail": "unknown"} > Score : 3400 > stopped : False > Local maintenance : False > crc32 : 57b2ece9 > local_conf_timestamp : 8463 > Host timestamp : 8463 > Extra metadata (valid at timestamp): > metadata_parse_version=1 > metadata_feature_version=1 > timestamp=8463 (Thu Feb 21 16:32:29 2019) > host-id=1 > score=3400 > vm_conf_refresh_time=8463 (Thu Feb 21 16:32:29 2019) > conf_on_shared_storage=True > maintenance=False > state=EngineDown > stopped=False > > > --== Host 2 status ==-- > > conf_on_shared_storage : True > Status up-to-date : True > Hostname : garlic.sanren.ac.za > Host ID : 2 > Engine status : {"reason": "failed liveliness check", > "health": "bad", "vm": "up", "detail": "Powering down"} > Score : 3400 > stopped : False > Local maintenance : False > crc32 : 71dc3daf > local_conf_timestamp : 8540 > Host timestamp : 8540 > Extra metadata (valid at timestamp): > metadata_parse_version=1 > metadata_feature_version=1 > timestamp=8540 (Thu Feb 21 16:32:31 2019) > host-id=2 > score=3400 > vm_conf_refresh_time=8540 (Thu Feb 21 16:32:31 2019) > conf_on_shared_storage=True > maintenance=False > state=EngineStop > stopped=False > timeout=Thu Jan 1 04:24:29 1970 > > > --== Host 3 status ==-- > > conf_on_shared_storage : True > Status up-to-date : True > Hostname : gohan.sanren.ac.za > Host ID : 3 > Engine status : {"reason": "vm not running on this > host", "health": "bad", "vm": "down", "detail": "unknown"} > Score : 3400 > stopped : False > Local maintenance : False > crc32 : 49645620 > local_conf_timestamp : 5480 > Host timestamp : 5480 > Extra metadata (valid at timestamp): > metadata_parse_version=1 > metadata_feature_version=1 > timestamp=5480 (Thu Feb 21 16:32:22 2019) > host-id=3 > score=3400 > vm_conf_refresh_time=5480 (Thu Feb 21 16:32:22 2019) > conf_on_shared_storage=True > maintenance=False > state=EngineDown > stopped=False > You have new mail in /var/spool/mail/root > > The service are running but with errors: > *vdsmd.service:* > [root@garlic qemu]# systemctl status vdsmd > ● vdsmd.service - Virtual Desktop Server Manager > Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor > preset: enabled) > Active: active (running) since Thu 2019-02-21 16:12:12 SAST; 3min 31s > ago > Process: 40117 ExecStopPost=/usr/libexec/vdsm/vdsmd_init_common.sh > --post-stop (code=exited, status=0/SUCCESS) > Process: 40121 ExecStartPre=/usr/libexec/vdsm/vdsmd_init_common.sh > --pre-start (code=exited, status=0/SUCCESS) > Main PID: 40224 (vdsmd) > Tasks: 47 > CGroup: /system.slice/vdsmd.service > ├─40224 /usr/bin/python2 /usr/share/vdsm/vdsmd > └─40346 /usr/libexec/ioprocess --read-pipe-fd 65 > --write-pipe-fd 64 --max-threads 10 --max-queued-requests 10 > > Feb 21 16:12:11 garlic.sanren.ac.za vdsmd_init_common.sh[40121]: vdsm: > Running nwfilter > Feb 21 16:12:11 garlic.sanren.ac.za vdsmd_init_common.sh[40121]: libvirt: > Network Filter Driver error : Requested operation is not valid: nwfilter is > in use > Feb 21 16:12:11 garlic.sanren.ac.za vdsmd_init_common.sh[40121]: vdsm: > Running dummybr > Feb 21 16:12:12 garlic.sanren.ac.za vdsmd_init_common.sh[40121]: vdsm: > Running tune_system > Feb 21 16:12:12 garlic.sanren.ac.za vdsmd_init_common.sh[40121]: vdsm: > Running test_space > Feb 21 16:12:12 garlic.sanren.ac.za vdsmd_init_common.sh[40121]: vdsm: > Running test_lo > Feb 21 16:12:12 garlic.sanren.ac.za systemd[1]: Started Virtual Desktop > Server Manager. > Feb 21 16:12:13 garlic.sanren.ac.za vdsm[40224]: WARN MOM not available. > Feb 21 16:12:13 garlic.sanren.ac.za vdsm[40224]: WARN MOM not available, > KSM stats will be missing. > Feb 21 16:12:13 garlic.sanren.ac.za vdsm[40224]: WARN Not ready yet, > ignoring event '|virt|VM_status|e2608f14-39fe-4ab6-b6be-9c60679e8c76' > args={'e2608f14-39fe-4ab6-b6be-9c606..., 'type': ' > Hint: Some lines were ellipsized, use -l to show in full. > > *libvirtd.service:* > [root@garlic qemu]# systemctl status libvirtd > ● libvirtd.service - Virtualization daemon > Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled; > vendor preset: enabled) > Drop-In: /etc/systemd/system/libvirtd.service.d > └─unlimited-core.conf > Active: active (running) since Thu 2019-02-21 16:06:50 SAST; 9min ago > Docs: man:libvirtd(8) > https://libvirt.org > Main PID: 38485 (libvirtd) > Tasks: 17 (limit: 32768) > CGroup: /system.slice/libvirtd.service > └─38485 /usr/sbin/libvirtd --listen > > Feb 21 16:06:50 garlic.sanren.ac.za systemd[1]: Starting Virtualization > daemon... > Feb 21 16:06:50 garlic.sanren.ac.za systemd[1]: Started Virtualization > daemon. > Feb 21 16:07:43 garlic.sanren.ac.za libvirtd[38485]: 2019-02-21 > 14:07:43.033+0000: 38485: info : libvirt version: 3.9.0, package: > 14.el7_5.8 (CentOS BuildSystem <http://bugs.c...centos.org) > Feb 21 16:07:43 garlic.sanren.ac.za libvirtd[38485]: 2019-02-21 > 14:07:43.033+0000: 38485: info : hostname: garlic.sanren.ac.za > Feb 21 16:07:43 garlic.sanren.ac.za libvirtd[38485]: 2019-02-21 > 14:07:43.033+0000: 38485: error : virNetSocketReadWire:1808 : End of file > while reading data: Input/output error > Feb 21 16:12:08 garlic.sanren.ac.za libvirtd[38485]: 2019-02-21 > 14:12:08.791+0000: 38485: error : virNetSocketReadWire:1808 : End of file > while reading data: Input/output error > Hint: Some lines were ellipsized, use -l to show in full. > > *ovirt-ha-broker & ovirt-ha-agent services:* > [root@garlic qemu]# systemctl restart ovirt-ha-broker > ^[[A[root@garlic qemu]# systemctl status ovirt-ha-broker > ● ovirt-ha-broker.service - oVirt Hosted Engine High Availability > Communications Broker > Loaded: loaded (/usr/lib/systemd/system/ovirt-ha-broker.service; > enabled; vendor preset: disabled) > Active: active (running) since Thu 2019-02-21 16:18:43 SAST; 30s ago > Main PID: 41493 (ovirt-ha-broker) > Tasks: 13 > CGroup: /system.slice/ovirt-ha-broker.service > ├─41493 /usr/bin/python > /usr/share/ovirt-hosted-engine-ha/ovirt-ha-broker > ├─41688 /bin/sh /usr/sbin/hosted-engine --check-liveliness > └─41689 python -m ovirt_hosted_engine_setup.check_liveliness > > Feb 21 16:18:43 garlic.sanren.ac.za systemd[1]: Started oVirt Hosted > Engine High Availability Communications Broker. > Feb 21 16:18:43 garlic.sanren.ac.za systemd[1]: Starting oVirt Hosted > Engine High Availability Communications Broker... > [root@garlic qemu]# systemctl status ovirt-ha-agent > ● ovirt-ha-agent.service - oVirt Hosted Engine High Availability > Monitoring Agent > Loaded: loaded (/usr/lib/systemd/system/ovirt-ha-agent.service; > enabled; vendor preset: disabled) > Active: active (running) since Thu 2019-02-21 16:18:53 SAST; 25s ago > Main PID: 41581 (ovirt-ha-agent) > Tasks: 2 > CGroup: /system.slice/ovirt-ha-agent.service > └─41581 /usr/bin/python > /usr/share/ovirt-hosted-engine-ha/ovirt-ha-agent > > Feb 21 16:18:53 garlic.sanren.ac.za systemd[1]: Started oVirt Hosted > Engine High Availability Monitoring Agent. > Feb 21 16:18:53 garlic.sanren.ac.za systemd[1]: Starting oVirt Hosted > Engine High Availability Monitoring Agent... > > Attached are logs of files that might contain some useful information to > troubleshoot. > > > Your assistance will be highly appreciated > > -- > Regards, > Sakhi Hadebe > > Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR > > Tel: +27 12 841 2308 <+27128414213> > Fax: +27 12 841 4223 <+27128414223> > Cell: +27 71 331 9622 <+27823034657> > Email: sakhi(a)sanren.ac.za <shadebe(a)csir.co.za> > > -- Regards, Sakhi Hadebe Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR Tel: +27 12 841 2308 <+27128414213> Fax: +27 12 841 4223 <+27128414223> Cell: +27 71 331 9622 <+27823034657> Email: sakhi(a)sanren.ac.za <shadebe(a)csir.co.za>

6 years, 2 months

2
3
0 / 0

Move infrastructure ,how to change FQDN

by Fabrice SOLER

Hello, I need to move all the physical infrastructure oVirt to another site (for student education). The node's FQDN and the hosted engine's FQDN must change. The version is ovirt 4.2.8 for the hosted engine and nodes. Is there sommone who know how to do ? Fabrice SOLER

6 years, 2 months

2
1
0 / 0

Ovirt 4.2.8.. Possible bug?

by matteo fedeli

Hi considering that the deploy with 4.2.7.8 failed I try to reinstall ovirt to version 4.2.8 and there are appened two strange things. During the volume step if i choose jbod mode in the deploy conf remain raid6 type... Why? To solve I have only tried to editing manually the file at line about volume type and the deploy stuck on creating physical volume... this is my conf file: (I used 3 HDDs 500GB each, node,engine + vmstore and data) #gdeploy configuration generated by cockpit-gluster plugin [hosts] kansas.planet.bn germany.planet.bn singapore.planet.bn [script1:kansas.planet.bn] action=execute ignore_script_errors=no file=/usr/share/gdeploy/scripts/grafton-sanity-check.sh -d sdb -h kansas.planet.bn, germany.planet.bn, singapore.planet.bn [script1:germany.planet.bn] action=execute ignore_script_errors=no file=/usr/share/gdeploy/scripts/grafton-sanity-check.sh -d sdb -h kansas.planet.bn, germany.planet.bn, singapore.planet.bn [script1:singapore.planet.bn] action=execute ignore_script_errors=no file=/usr/share/gdeploy/scripts/grafton-sanity-check.sh -d sdb -h kansas.planet.bn, germany.planet.bn, singapore.planet.bn [disktype] jbod [diskcount] 12 [stripesize] 256 [service1] action=enable service=chronyd [service2] action=restart service=chronyd [shell2] action=execute command=vdsm-tool configure --force [script3] action=execute file=/usr/share/gdeploy/scripts/blacklist_all_disks.sh ignore_script_errors=no [pv1:kansas.planet.bn] action=create devices=sdb ignore_pv_errors=no [pv1:germany.planet.bn] action=create devices=sdb ignore_pv_errors=no [pv1:singapore.planet.bn] action=create devices=sdb ignore_pv_errors=no [vg1:kansas.planet.bn] action=create vgname=gluster_vg_sdb pvname=sdb ignore_vg_errors=no [vg1:germany.planet.bn] action=create vgname=gluster_vg_sdb pvname=sdb ignore_vg_errors=no [vg1:singapore.planet.bn] action=create vgname=gluster_vg_sdb pvname=sdb ignore_vg_errors=no [lv1:kansas.planet.bn] action=create poolname=gluster_thinpool_sdb ignore_lv_errors=no vgname=gluster_vg_sdb lvtype=thinpool size=1005GB poolmetadatasize=5GB [lv2:germany.planet.bn] action=create poolname=gluster_thinpool_sdb ignore_lv_errors=no vgname=gluster_vg_sdb lvtype=thinpool size=1005GB poolmetadatasize=5GB [lv3:singapore.planet.bn] action=create poolname=gluster_thinpool_sdb ignore_lv_errors=no vgname=gluster_vg_sdb lvtype=thinpool size=1005GB poolmetadatasize=5GB [lv4:kansas.planet.bn] action=create lvname=gluster_lv_engine ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/engine size=100GB lvtype=thick [lv5:kansas.planet.bn] action=create lvname=gluster_lv_data ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/data lvtype=thinlv poolname=gluster_thinpool_sdb virtualsize=500GB [lv6:kansas.planet.bn] action=create lvname=gluster_lv_vmstore ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/vmstore lvtype=thinlv poolname=gluster_thinpool_sdb virtualsize=500GB [lv7:germany.planet.bn] action=create lvname=gluster_lv_engine ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/engine size=100GB lvtype=thick [lv8:germany.planet.bn] action=create lvname=gluster_lv_data ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/data lvtype=thinlv poolname=gluster_thinpool_sdb virtualsize=500GB [lv9:germany.planet.bn] action=create lvname=gluster_lv_vmstore ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/vmstore lvtype=thinlv poolname=gluster_thinpool_sdb virtualsize=500GB [lv10:singapore.planet.bn] action=create lvname=gluster_lv_engine ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/engine size=100GB lvtype=thick [lv11:singapore.planet.bn] action=create lvname=gluster_lv_data ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/data lvtype=thinlv poolname=gluster_thinpool_sdb virtualsize=500GB [lv12:singapore.planet.bn] action=create lvname=gluster_lv_vmstore ignore_lv_errors=no vgname=gluster_vg_sdb mount=/gluster_bricks/vmstore lvtype=thinlv poolname=gluster_thinpool_sdb virtualsize=500GB [selinux] yes [service3] action=restart service=glusterd slice_setup=yes [firewalld] action=add ports=111/tcp,2049/tcp,54321/tcp,5900/tcp,5900-6923/tcp,5666/tcp,16514/tcp,54322/tcp services=glusterfs [script2] action=execute file=/usr/share/gdeploy/scripts/disable-gluster-hooks.sh [shell3] action=execute command=usermod -a -G gluster qemu [volume1] action=create volname=engine transport=tcp replica=yes replica_count=3 key=group,storage.owner-uid,storage.owner-gid,network.ping-timeout,performance.strict-o-direct,network.remote-dio,cluster.granular-entry-heal value=virt,36,36,30,on,off,enable brick_dirs=kansas.planet.bn:/gluster_bricks/engine/engine,germany.planet.bn:/gluster_bricks/engine/engine,singapore.planet.bn:/gluster_bricks/engine/engine ignore_volume_errors=no [volume2] action=create volname=data transport=tcp replica=yes replica_count=3 key=group,storage.owner-uid,storage.owner-gid,network.ping-timeout,performance.strict-o-direct,network.remote-dio,cluster.granular-entry-heal value=virt,36,36,30,on,off,enable brick_dirs=kansas.planet.bn:/gluster_bricks/data/data,germany.planet.bn:/gluster_bricks/data/data,singapore.planet.bn:/gluster_bricks/data/data ignore_volume_errors=no [volume3] action=create volname=vmstore transport=tcp replica=yes replica_count=3 key=group,storage.owner-uid,storage.owner-gid,network.ping-timeout,performance.strict-o-direct,network.remote-dio,cluster.granular-entry-heal value=virt,36,36,30,on,off,enable brick_dirs=kansas.planet.bn:/gluster_bricks/vmstore/vmstore,germany.planet.bn:/gluster_bricks/vmstore/vmstore,singapore.planet.bn:/gluster_bricks/vmstore/vmstore ignore_volume_errors=no

6 years, 2 months

3
4
0 / 0

Re: Ovirt Glusterfs

by Strahil

I have done some testing and it seems that storhaug + ctdb + nfs-ganesha is showing decent performance in a 3 node hyperconverged setup. Fuse mounts are hitting some kind of limit when mounting gluster -3.12.15 volumes. Best Regards, Strahil Nikolov

6 years, 2 months

3
2
0 / 0

Creating new VM

by Yujin Boby

I installed oVirt, when i try to create a new VM, it says This host is managed by a virtualization manager, so creation of new VM from this host is not possible. https://imgur.com/a/hpqV6ML Any idea why i am getting this error ? Do i need more than 1 server to create Virtual machines ? Like adding a node ?

6 years, 2 months

2
1
0 / 0

update to 4.2.8 fails

by Vincent Royer

trying to update from 4.2.6 to 4.2.8 yum update fails with: --> Finished Dependency Resolution Error: Package: vdsm-4.20.46-1.el7.x86_64 (ovirt-4.2) Requires: libvirt-daemon-kvm >= 4.5.0-10.el7_6.3 Installed: libvirt-daemon-kvm-3.9.0-14.el7_5.8.x86_64 (installed) libvirt-daemon-kvm = 3.9.0-14.el7_5.8 Error: Package: 10:qemu-kvm-ev-2.12.0-18.el7_6.3.1.x86_64 (ovirt-4.2-centos-qemu-ev) Requires: libepoxy.so.0()(64bit) Error: Package: 10:qemu-kvm-ev-2.12.0-18.el7_6.3.1.x86_64 (ovirt-4.2-centos-qemu-ev) Requires: libibumad.so.3()(64bit) Error: Package: 10:qemu-kvm-ev-2.12.0-18.el7_6.3.1.x86_64 (ovirt-4.2-centos-qemu-ev) Requires: libgbm.so.1()(64bit) You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest Uploading Enabled Repositories Report 2019-02-13 16:42:14,190 [INFO] yum:17779:Dummy-18 @connection.py:868 - Connection built: host=subscription.rhsm.redhat.com port=443 handler=/subscription auth=identity_cert ca_dir=/etc/rhsm/ca/ insecure=False Loaded plugins: fastestmirror, product-id, subscription-manager 2019-02-13 16:42:14,199 [WARNING] yum:17779:Dummy-18 @logutil.py:141 - logging already initialized 2019-02-13 16:42:14,200 [ERROR] yum:17779:Dummy-18 @identity.py:145 - Reload of consumer identity cert /etc/pki/consumer/cert.pem raised an exception with msg: [Errno 2] No such file or directory: '/etc/pki/consumer/key.pem' 2019-02-13 16:42:14,200 [INFO] yum:17779:Dummy-18 @connection.py:868 - Connection built: host=subscription.rhsm.redhat.com port=443 handler=/subscription auth=identity_cert ca_dir=/etc/rhsm/ca/ insecure=False 2019-02-13 16:42:14,201 [INFO] yum:17779:Dummy-18 @repolib.py:471 - repos updated: Repo updates Total repo updates: 0 Updated <NONE> Added (new) <NONE> Deleted <NONE> This system is not registered with an entitlement server. You can use subscription-manager to register. Cannot upload enabled repos report, is this client registered? [root@brian yum.repos.d]# yum repolist Loaded plugins: enabled_repos_upload, fastestmirror, imgbased-persist, package_upload, product-id, search-disabled-repos, subscription-manager, vdsmupgrade 2019-02-13 16:42:36,489 [ERROR] yum:17809:MainThread @identity.py:145 - Reload of consumer identity cert /etc/pki/consumer/cert.pem raised an exception with msg: [Errno 2] No such file or directory: '/etc/pki/consumer/key.pem' 2019-02-13 16:42:36,490 [INFO] yum:17809:MainThread @connection.py:868 - Connection built: host=subscription.rhsm.redhat.com port=443 handler=/subscription auth=identity_cert ca_dir=/etc/rhsm/ca/ insecure=False 2019-02-13 16:42:36,491 [INFO] yum:17809:MainThread @repolib.py:471 - repos updated: Repo updates Total repo updates: 0 Updated <NONE> Added (new) <NONE> Deleted <NONE> This system is not registered with an entitlement server. You can use subscription-manager to register. Loading mirror speeds from cached hostfile * ovirt-4.2: mirrors.rit.edu * ovirt-4.2-epel: mirror.sjc02.svwh.net repo id repo name status centos-sclo-rh-release/x86_64 CentOS-7 - SCLo rh 8,113 ovirt-4.2/7 Latest oVirt 4.2 Release 2,558 ovirt-4.2-centos-gluster312/x86_64 CentOS-7 - Gluster 3.12 262 ovirt-4.2-centos-opstools/x86_64 CentOS-7 - OpsTools - release 853 ovirt-4.2-centos-ovirt42/x86_64 CentOS-7 - oVirt 4.2 631 ovirt-4.2-centos-qemu-ev/x86_64 CentOS-7 - QEMU EV 71 ovirt-4.2-epel/x86_64 Extra Packages for Enterprise Linux 7 - x86_64 *Help!*

6 years, 2 months

6
11
0 / 0

How to recreate Ovirt CA from scratch

by Giorgio Biacchi

Hi list, during our datacenter lifetime many things changed. We moved the engine twice on different hosts with, of course, different FQDNs, and many other changes. Now we are stuck with an error when we try to upload an image to a data domain. The error is somehow bound to a failure to validate the ovirt-imageio-proxy certificate and, since the current root CA certificate is still signed with sha1WithRSAEncryption we'd like to regenerate the whole CA. That's the steps we've done.. without success... 1) Make a tar.gz of the /etc/pki/ovirt-engine as backup 2) Create a new CA cert using the same private key: openssl req -key /etc/pki/ovirt-engine/private/ca.pem -new -x509 -days 3650 -sha256 -extensions v3_ca -out newca.cert.pem 3) Put the new CA cert in place mv ca.pem ca.pem.orig.20190219;mv newca.cert.pem ca.pem 4) Resign all the other certs names="engine apache websocket-proxy jboss imageio-proxy" for name in $names; do subject="$( openssl \ x509 \ -in /etc/pki/ovirt-engine/certs/"${name}".cer \ -noout \ -subject \ | sed \ 's;subject= $.*$;\1;' \ )" /usr/share/ovirt-engine/bin/pki-enroll-pkcs12.sh \ --name="${name}" \ --password=mypass \ --subject="${subject}" \ --keep-key done 5) Restart all the services systemctl restart httpd systemctl restart ovirt-engine systemctl restart ovirt-websocket-proxy systemctl restart ovirt-imageio-proxy The following step was to take the backup at 1) and fall back to the initial state because nothing worked as expected. There's any documented procedure about how to recreate Ovirt CA from scratch?? Thanks in advance -- gb PGP Key: http://pgp.mit.edu/ Primary key fingerprint: C510 0765 943E EBED A4F2 69D3 16CC DC90 B9CB 0F34

6 years, 2 months

2
3
0 / 0

Re: Info about AD integration and Root CA

by Strahil

You can get the root CA from any windows machine in the domain . Best Regards, Strahil Nikolov

6 years, 2 months

1
0
0 / 0

Installing oVirt on Physical machine (Solved)

by emmanualvnebu1＠gmail.com

Issue: Unable to install oVirt on physical machine with USB. Once selected the option to install oVirt 4.3 it give a screen "dracut-initqueue time out And then get into emergency mode & gives dracut cmd line. Fix:I think I fixed it. The issue was with the bootable usb. Tried with multiple software to create & one worked. https://www.balena.io/etcher/ Thanks for everyone’s help.. Appreciate it.

6 years, 2 months

1
0
0 / 0

Installing oVirt on Physical machine V4.3

by emmanualvnebu1＠gmail.com

Hi Guys, I am trying to install oVirt node on a physical machine. Once selected the option to install oVirt 4.3 it give a screen "dracut-initqueue time out And then get into emergency mode & gives dracut cmd line. if I exit the command line, it continue boot into the installation window. However it gives a message "Kickstart file /run/install/ks.config is missing" (Pane is dead). Tried the same on vmware, it boot fine & am able to install it. Can someone tell me how could I fix this?

6 years, 2 months

3
11
0 / 0

Re: Installing oVirt on Physical machine V4.3

by Emmanual Vnebu

I think I fixed it. The issue was with the bootable usb. Tried with multiple software to create & one worked. https://www.balena.io/etcher/ Thanks for everyone’s help.. Appreciate it.. 😊 Sent from Mail for Windows 10

6 years, 2 months

1
0
0 / 0

Design question: one big NFS share or several smaller ones?

by Markus Schaufler

Hi all, I've got a design question: Are there any best practices regarding NFS datastores especially datastore sizing? Should I use one big NFS datastore and expand it on demand or should the size not exceed a certain limit and start with a new NFS datastore? Are there any other configuration considerations (NFS v3 or v4(.1) and mounting options)?

6 years, 2 months

3
2
0 / 0

Fencing : SSL or not?

by Nicolas Ecarnot

Hello, As fence_idrac has never worked for us, and as fence_ipmilan has worked nicely since years, we are using fence_ipmilan with the lanplus=1 option and we're happy with it. We upgraded to 4.3.0.4 and we're witnessing that we cannot fence our hosts anymore : 2019-02-18 09:42:08,678+01 ERROR [org.ovirt.engine.core.bll.pm.FenceProxyLocator] (default task-11) [2f78ed99-6703-4d92-b7cb-948c2d24b623] Can not run fence action on host 'xxxxx', no suitable proxy host was found. and on the SPM : fence_ipmilan: Failed: Unable to obtain correct plug status or plug is not available I found the suggested workaround here : https://access.redhat.com/solutions/3349841 but no combination of - lanplus={0,1} - -z - ssl=={0,1} lead to no solution. The package version is the same as what's described in the KB : fence-agents-rhevm-4.2.1-11.el7_6.7.x86_64 What should I test now? Thank you. -- Nicolas ECARNOT

6 years, 2 months

2
7
0 / 0

Re: Host choice when migrating VMs

by Karli Sjöberg

6 years, 2 months

1
0
0 / 0

Re: Host choice when migrating VMs

by Karli Sjöberg

6 years, 2 months

3
2
0 / 0

Re: Host choice when migrating VMs

by Karli Sjöberg

6 years, 2 months

2
1
0 / 0

Re: Host choice when migrating VMs

by Karli Sjöberg

6 years, 2 months

3
2
0 / 0

Re: Host choice when migrating VMs

by Karli Sjöberg

6 years, 2 months

1
0
0 / 0

Re: [ovirt-devel] Installing oVirt on Physical machine

by Greg Sheremeta

redirecting to users list Greg On Fri, Feb 22, 2019 at 6:00 AM <emmanualvnebu1(a)gmail.com> wrote: > Hi Guys, > > I am trying to install oVirt node on a physical machine. > > Once selected the option to install oVirt 4.3 it give a screen > > "dracut-initqueue time out > And then get into emergency mode & gives dracut cmd line. > > if I exit the command line, it continue bootinto the installation window. > > However it gives a message "Kickstart file /run/install/ks.config is > missing" (Pane is dead). > > Tried the same on vmware, it boot fine & am able to install it. > > Can someone tell me how could I fix this? > _______________________________________________ > Devel mailing list -- devel(a)ovirt.org > To unsubscribe send an email to devel-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/MQQPLZ4QTFP... > -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX Red Hat NA <https://www.redhat.com/> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig>

6 years, 2 months

1
0
0 / 0

Re: Novnc issues are not available to regular users

by Strahil

There is an enhancement going on which will allow regular users to change some settings, like console type , etc. Best Regards, Strahil Nikolov

6 years, 2 months

3
2
0 / 0

Host choice when migrating VMs

by Nicolas Ecarnot

Hello, I'm almost sure the following is useless as I think I know how it's working, but as I'm preparing a major change in our infrastructure, I'd rather be sure and not mess up. And also to be sure. (Just to be sure) For some reasons, and for the first time in our infra., one of our new DC will temporary include heterogeneous hosts : some networks will be available only on parts of them. Please may someone confirm me that with every load balancing / VM startup / VM migration / host choice, oVirt will smartly choose the available host equipped with the adequate networks? -- Nicolas ECARNOT

6 years, 2 months

1
0
0 / 0

Novnc issues are not available to regular users

by xilazz＠126.com

Hi, I have a question. When I use ordinary users to log in the management platform, the VNC of the virtual machine can only be logged in through the virtviewer tool, and there is no novnc option.

6 years, 2 months

1
0
0 / 0

oVirt 4.3 Unable to configure console options in VM Portal

by dwest＠galois.com

There does not seem to be a way for users to configure "Console options" when using the VM Portal. In older versions of oVirt, users had the ability to fully control how they configured their VM's. With the new VM Portal and the streamlined approach, they are not able to customize this. This forces them to use whatever console option is setup by default, which is usually a native client. If users are unable to configure their own console settings, then I would like to set the default console to use NoVNC so that it opens the console in a browser window instead of a native client. This will allow users without a native VNC client (Such as MacOS) to be able to connect to their VM consoles. I think have half the solution figured out, but it only affects the Administration Portal and not the VM Portal. engine-config –s ClientModeVncDefault=NoVnc It also does not affect the default "Video Type" or "Graphics Protocol". Is this something that is configurable? I have not found any related settings using the following command: engine-config -l There is also a file for configuring OS defaults, but no documentation of any additional values it could support: /etc/ovirt-engine/osinfo.conf.d/00-defaults.properties Ideally, I would like to be able to configure a few more default settings, such as "Optimized for" and "Disable Single Sign-on", so I think solving the console options problem will ultimately lead to a solution for these as well. Any suggestions?

6 years, 2 months

2
1
0 / 0

Unable to upload images

by michael＠wanderingmad.com

I just updated my ovirt to the latest, and now I can't upload images that I used to be able to. I can upload and see the nagio xi virtual appliance, but I can't upload .disk files anymore, I get a red error in GUI and it say image file not supported, but I used to be able to upload same file in previous version with no issue

6 years, 2 months

3
3
0 / 0

Preserve vm state

by Leo David

Hi Everyone, I have this challange where I need to rollback a couple of vms to a certain base snapshot everytime it starts, for a school computer lab. It there a way to configure this feature somehow in the UI ? Thank you very much ! Leo

6 years, 2 months

3
4
0 / 0

Ovirt Glusterfs

by suporte＠logicworks.pt

Hi, How can I get the best performance when using Glusterfs as an oVirt Domain Storage? Thanks José -- Jose Ferradeira http://www.logicworks.pt

6 years, 2 months

1
0
0 / 0

Forcing vdsm to configure another NIC as the bridge (oVirt 4.2.8)

by zachary.winter＠vcwise.com

I installed a new 10GbE NIC after installing the oVirt engine, and upon reboot vdsm began auto-configuring one of the ports on the new NIC rather than the original 1GbE interface. The new NIC is not currently connected to anything, so I am wondering how to force vdsm to use the 1GbE NIC until I install and connect the server to a 10GbE switch. This is causing the data center and host in the Administration Portal to show as "non-operational," though I can still log in. I have been poring over any files I can find on the server relating to "ovirtmgmt" or "vdsm," and I am wondering if I simply change the "nic" parameter to the name of the 1GbE interface in the following file that reloading vdsmd or rebooting will cause it to behave the way I want: /var/lib/vdsm/persistence/netconf/nets/ovirtmgmt Any insight on this? Are there other locations that need to be edited to force vdsm to use, say, "eth0" rather than "eth3"? Are there files that I need to delete so vdsm will automatically re-create them? Any help is appreciated - thanks!

6 years, 2 months

4
10
0 / 0

When I want to use the VNC tool to connect to the virtual machine, I am prompted to enter the virtual machine VNC password

by xilazz＠126.com

Hi， When I want to use the VNC tool to connect to the virtual machine, I will be prompted for the virtual machine VNC password. The virtual machine XML file is shown below. Where can I query passwd in the VNC configuration? <graphics type='vnc' port='-1' autoport='yes' keymap='en-us' passwd='*****' passwdValidTo='1970-01-01T00:00:01'> <listen type='network' network='vdsm-ovirtmgmt'/> </graphics> Do you need to change the listen parameter in the libvirtd.conf configuration file.

6 years, 2 months

2
1
0 / 0

failed to import vm from a standalone kvm host

by adam_xu＠adagene.com.cn

Hello, everyone. I'm testing ovirt 4.3.0 now and when I try to import a vm from a standalone kvm host, it failed. My ovirt cluster's backend storage is a HPE FC device. here's my step: 1. shutdown the vm in that kvm host. 2. Enable public key authentication between the proxy host (ovirt1) and the KVM host: 3. Enter the URI of the KVM host. qemu+ssh://root@192.168.49.191/system 4. Enter the username and password 5. click "Load" and I can get the vm list. 6. select the vm and use the arrows to move them to the Virtual Machines to Import list. 7. click "next" and select os type to RHEL 6.x X64. 8. click OK. then the progress of Importing VM centos6 to Cluster Default failed. log in the proxy host ovirt1 here: [ 0.5] preparing for copy [ 0.5] Copying disk 1/1 to /rhev/data-center/mnt/blockSD/b842aa93-d374-45ef-8555-ffdb1be274fc/images/18f1ceeb-a28f-4b05-8cd6-1b614cad9445/21380c99-696d-4f62-9f48-d6959041b162 (0/100%)^M (0/100%)^M (100/100%)^MTraceback (most recent call last): File "/usr/libexec/vdsm/kvm2ovirt", line 22, in <module> kvm2ovirt.main() File "/usr/lib/python2.7/site-packages/vdsm/kvm2ovirt.py", line 255, in main handle_volume(con, diskno, src, dst, options) File "/usr/lib/python2.7/site-packages/vdsm/kvm2ovirt.py", line 196, in handle_volume options.bufsize) File "/usr/lib/python2.7/site-packages/vdsm/kvm2ovirt.py", line 159, in download_disk_sparse stream.sparseRecvAll(bytesWriteHandler, recvSkipHandler, op) File "/usr/lib64/python2.7/site-packages/libvirt.py", line 6122, in sparseRecvAll ret = holeHandler(self, length, opaque) File "/usr/lib/python2.7/site-packages/vdsm/kvm2ovirt.py", line 82, in recvSkipHandler return os.ftruncate(fd, cur) OSError: [Errno 22] Invalid argument So how could I fix that error, is there anything wrong in my step? Thanks. yours Adam

6 years, 2 months

1
0
0 / 0

left over volume after failed disk move

by Bill James

I tried moving some disks from one gluster volume to another. 8 worked, 6 failed. I can't retry the move because ovirt says: 2019-02-14 21:36:49,450-08 ERROR [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (DefaultQuartzScheduler4) [2d9789d1] BaseAsyncTask::logEndTaskFailure: Task '2a0e703b-0239-41f8-a920 -50c1ae096590' (Parent Command 'CreateImagePlaceholder', Parameters Type 'org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters') ended with failure: -- Result: 'cleanSuccess' -- Message: 'VDSGenericException: VDSErrorException: Failed in vdscommand to HSMGetAllTasksStatusesVDS, error = Volume already exists: ('d33e8048-a4b4-4b85-bf44-20be65b854f2',)', How do I clear up the gluster volume of these failed images? I'm running : ovirt-engine-4.1.8.2-1.el7.centos.noarch glusterfs-3.8.15-2.el7.x86_64 vdsm-4.19.43-1.el7.centos.x86_64 Some errors from the first failed disk move: 2019-02-14 21:23:44,114-08 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.VmReplicateDiskFinishVDSCommand] (DefaultQuartzScheduler2) [7adfa09d-d0d6-4478-9a6a-c505535e325b] Failed in 'VmReplicateDiskFinishVDS' method 2019-02-14 21:23:44,125-08 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler2) [7adfa09d-d0d6-4478-9a6a-c505535e325b] EVENT_ID: V DS_BROKER_COMMAND_FAILURE(10,802), Correlation ID: null, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: VDSM ovirt4.j2noc.com command VmReplicateDiskFinishVDS fai led: Resource unavailable attached is engine.log.

6 years, 2 months

2
3
0 / 0

understanding ovirt communication

by hlmstu＠hs-lausitz.de

Hallo, I installed ovirt-engine and ovirt-node. I try add host:new but received errormg InstallFailed. seem connection to following ports: 49076 49080 49084... Howto understanding ovirt communication? keywords: engine,dwh,ovn,libvirt,virtd,node,otopi,vdsmd,sshd,node,goferd regards Heiko

6 years, 2 months

2
3
0 / 0

process stuck while adding disk

by Dev Ops

I tried adding a 400 gig disk to a VM. I could see the disk being built out on the storage, mounted via nfs, but clearly something is stuck. A few hours later and I see nothing finishing. Nothing seems to be logging to the engine.log and I have restarted vdsmd on all the hosts and have restarted the ovirt-engine and httpd on the engine. I see this running in my Events: https://www.screencast.com/t/OnnWAdTCjQi0 I have added other 400 gig disks to other VM's while this was running and they have completed fine in less than 5 minutes. Not sure where to look to fix this after pretty much restarting everything I could think of to try and unlock the process. /usr/share/ovirt-engine/setup/dbutils/unlock_entity.sh -t all -q Locked VMs Locked templates Locked disks Locked snapshots Illegal images Thanks!

6 years, 2 months

1
1
0 / 0

oVirt 4.3.1 test day

by Sandro Bonazzola

Hi, We are planning to release the first candidate of 4.3.1 on February 20th[1] and the final release on February 26th. Please join us testing this release candidate right after it will be announced! We are going to coordinate the testing effort with a public Trello board at https://trello.com/b/5ZNJgPC3 You'll find instructions on how to use the board there. If you have an environment dedicated to testing, remember you can setup a few VMs and test the deployment with nested virtualization. To ease the setup of such environment you can use Lago ( https://github.com/lago-project) The oVirt team will monitor the Trello board, the #ovirt IRC channel on irc.oftc.net server and the users(a)ovirt.org mailing list to assist with the testing. [1] https://www.ovirt.org/develop/release-management/releases/4.3.z/release-m... -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

6 years, 2 months

4
5
0 / 0

cannot start vm after upgrade to ovirt-4.3

by Moritz Baumann

After upgrading from 4.2 -> 4.3 I cannot start a vm anymore. I try to start the vm with run once on a specific node (ovirt-node04) and this is the output of /var/log/vdsm/vdsm.log 2019-02-19 12:08:33,626+0100 INFO (jsonrpc/6) [api.host] START getAllVmStats() from=::ffff:129.132.17.194,33924 (api:48) 2019-02-19 12:08:33,631+0100 INFO (jsonrpc/6) [api.host] FINISH getAllVmStats return={'status': {'message': 'Done', 'code': 0}, 'statsList': (suppressed)} from=::ffff:129.132.17.194,33924 (api:54) 2019-02-19 12:08:33,633+0100 INFO (jsonrpc/6) [jsonrpc.JsonRpcServer] RPC call Host.getAllVmStats succeeded in 0.00 seconds (__init__:312) 2019-02-19 12:08:34,218+0100 INFO (jsonrpc/4) [api.virt] START create(vmParams={u'xml': u'<?xml version="1.0" encoding="UTF-8"?><domain type="kvm" xmlns:ovirt-tune="http://ovirt.org/vm/tune/1.0" xmlns:ovirt-vm="http://ovirt.org/vm/1.0"><name>mortalkombat</name><uuid>abee17b9-079e-452c-a97d-99eff951dc39</uuid><memory>2097152</memory><currentMemory>2097152</currentMemory><maxMemory slots="16">8388608</maxMemory><vcpu current="1">16</vcpu><sysinfo type="smbios"><system><entry name="manufacturer">oVirt</entry><entry name="product">OS-NAME:</entry><entry name="version">OS-VERSION:</entry><entry name="serial">HOST-SERIAL:</entry><entry name="uuid">abee17b9-079e-452c-a97d-99eff951dc39</entry></system></sysinfo><clock offset="variable" adjustment="0"><timer name="rtc" tickpolicy="catchup"></timer><timer name="pit" tickpolicy="delay"></timer><timer name="hpet" present="no"></timer></clock><features><acpi></acpi></features><cpu match="exact"><model>SandyBridge</model><feature name="pcid" policy="require"></feature><feature name="spec-ctrl" policy="require"></feature><feature name="ssbd" policy="require"></feature><topology cores="1" threads="1" sockets="16"></topology><numa><cell id="0" cpus="0" memory="2097152"></cell></numa></cpu><cputune></cputune><devices><input type="mouse" bus="ps2"></input><channel type="unix"><target type="virtio" name="ovirt-guest-agent.0"></target><source mode="bind" path="/var/lib/libvirt/qemu/channels/abee17b9-079e-452c-a97d-99eff951dc39.ovirt-guest-agent.0"></source></channel><channel type="unix"><target type="virtio" name="org.qemu.guest_agent.0"></target><source mode="bind" path="/var/lib/libvirt/qemu/channels/abee17b9-079e-452c-a97d-99eff951dc39.org.qemu.guest_agent.0"></source></channel><rng model="virtio"><backend model="random">/dev/urandom</backend><alias name="ua-39b1e011-518c-4ca6-91c8-6ae63cea0824"></alias></rng><video><model type="qxl" vram="32768" heads="1" ram="65536" vgamem="16384"></model><alias name="ua-5de2d61a-2e0e-4194-b023-c1bfcb8f9f4e"></alias><address bus="0x00" domain="0x0000" function="0x0" slot="0x02" type="pci"></address></video><controller type="virtio-serial" index="0" ports="16"><alias name="ua-78c78899-4f5b-4217-95eb-d11ebf3b882e"></alias><address bus="0x00" domain="0x0000" function="0x0" slot="0x04" type="pci"></address></controller><controller type="usb" model="piix3-uhci" index="0"><address bus="0x00" domain="0x0000" function="0x2" slot="0x01" type="pci"></address></controller><memballoon model="virtio"><stats period="5"></stats><alias name="ua-94e7e4cb-9b07-4560-bb25-b02ef2b0cdbe"></alias><address bus="0x00" domain="0x0000" function="0x0" slot="0x06" type="pci"></address></memballoon><graphics type="spice" port="-1" autoport="yes" passwd="*****" passwdValidTo="1970-01-01T00:00:01" tlsPort="-1"><filetransfer enable="no"></filetransfer><channel name="main" mode="secure"></channel><channel name="inputs" mode="secure"></channel><channel name="cursor" mode="secure"></channel><channel name="playback" mode="secure"></channel><channel name="record" mode="secure"></channel><channel name="display" mode="secure"></channel><channel name="smartcard" mode="secure"></channel><channel name="usbredir" mode="secure"></channel><listen type="network" network="vdsm-ovirtmgmt"></listen></graphics><channel type="spicevmc"><target type="virtio" name="com.redhat.spice.0"></target></channel><interface type="bridge"><model type="virtio"></model><link state="up"></link><source bridge="external"></source><alias name="ua-b5ce5e56-0a45-4917-b60b-a83edae1c649"></alias><address bus="0x00" domain="0x0000" function="0x0" slot="0x03" type="pci"></address><boot order="2"></boot><mac address="00:1a:4a:1b:a4:01"></mac><mtu size="1500"></mtu><filterref filter="vdsm-no-mac-spoofing"></filterref><bandwidth></bandwidth></interface><disk type="file" device="cdrom" snapshot="no"><driver name="qemu" type="raw" error_policy="report"></driver><source file="" startupPolicy="optional"></source><target dev="hdc" bus="ide"></target><readonly></readonly><alias name="ua-70717d83-9339-426b-b954-0ed01f8d60db"></alias><address bus="1" controller="0" unit="0" type="drive" target="0"></address></disk><disk snapshot="no" type="file" device="disk"><target dev="vda" bus="virtio"></target><source file="/rhev/data-center/00000002-0002-0002-0002-0000000003c4/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8/21f73e32-2bd1-46db-a4cd-b0e01416954c"></source><driver name="qemu" io="threads" type="raw" error_policy="stop" cache="none"></driver><alias name="ua-ef5893bc-cbe0-4971-8884-a4547a65fcc8"></alias><boot order="1"></boot><serial>ef5893bc-cbe0-4971-8884-a4547a65fcc8</serial></disk><disk snapshot="no" type="file" device="disk"><target dev="vdb" bus="virtio"></target><source file="/rhev/data-center/00000002-0002-0002-0002-0000000003c4/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/9b913d5d-5103-44c8-9053-6a02f5dd3562/482698c2-b1bd-4715-9bc5-e222405260df"></source><driver name="qemu" io="threads" type="raw" error_policy="stop" cache="none"></driver><alias name="ua-9b913d5d-5103-44c8-9053-6a02f5dd3562"></alias><serial>9b913d5d-5103-44c8-9053-6a02f5dd3562</serial></disk></devices><pm><suspend-to-disk enabled="no"></suspend-to-disk><suspend-to-mem enabled="no"></suspend-to-mem></pm><os><type arch="x86_64" machine="pc-i440fx-rhel7.6.0">hvm</type><smbios mode="sysinfo"></smbios><bootmenu enable="yes" timeout="30000"></bootmenu></os><metadata><ovirt-tune:qos></ovirt-tune:qos><ovirt-vm:vm><ovirt-vm:minGuaranteedMemoryMb type="int">2048</ovirt-vm:minGuaranteedMemoryMb><ovirt-vm:clusterVersion>4.3</ovirt-vm:clusterVersion><ovirt-vm:custom></ovirt-vm:custom><ovirt-vm:device mac_address="00:1a:4a:1b:a4:01"><ovirt-vm:custom></ovirt-vm:custom></ovirt-vm:device><ovirt-vm:device devtype="disk" name="vda"><ovirt-vm:poolID>00000002-0002-0002-0002-0000000003c4</ovirt-vm:poolID><ovirt-vm:volumeID>21f73e32-2bd1-46db-a4cd-b0e01416954c</ovirt-vm:volumeID><ovirt-vm:imageID>ef5893bc-cbe0-4971-8884-a4547a65fcc8</ovirt-vm:imageID><ovirt-vm:domainID>c17d9d7f-e578-4626-a5d9-94ea555d7115</ovirt-vm:domainID></ovirt-vm:device><ovirt-vm:device devtype="disk" name="vdb"><ovirt-vm:poolID>00000002-0002-0002-0002-0000000003c4</ovirt-vm:poolID><ovirt-vm:volumeID>482698c2-b1bd-4715-9bc5-e222405260df</ovirt-vm:volumeID><ovirt-vm:imageID>9b913d5d-5103-44c8-9053-6a02f5dd3562</ovirt-vm:imageID><ovirt-vm:domainID>c17d9d7f-e578-4626-a5d9-94ea555d7115</ovirt-vm:domainID></ovirt-vm:device><ovirt-vm:launchPaused>false</ovirt-vm:launchPaused><ovirt-vm:resumeBehavior>auto_resume</ovirt-vm:resumeBehavior></ovirt-vm:vm></metadata></domain>'}) from=::ffff:129.132.17.194,33924, flow_id=978c7200-b51e-42f8-962d-e8e11383ee53, vmId= (api:48) 2019-02-19 12:08:34,255+0100 INFO (jsonrpc/4) [api.virt] FINISH create return={'status': {'message': 'Done', 'code': 0}, 'vmList': {'status': 'WaitForLaunch', 'maxMemSize': 8192, 'acpiEnable': 'true', 'emulatedMachine': 'pc-i440fx-rhel7.6.0', 'vmId': 'abee17b9-079e-452c-a97d-99eff951dc39', 'memGuaranteedSize': 2048, 'timeOffset': '0', 'smpThreadsPerCore': '1', 'cpuType': 'SandyBridge', 'guestDiskMapping': {}, 'arch': 'x86_64', 'smp': '1', 'guestNumaNodes': [{'nodeIndex': 0, 'cpus': '0', 'memory': '2048'}], u'xml': u'<?xml version="1.0" encoding="UTF-8"?><domain type="kvm" xmlns:ovirt-tune="http://ovirt.org/vm/tune/1.0" xmlns:ovirt-vm="http://ovirt.org/vm/1.0"><name>mortalkombat</name><uuid>abee17b9-079e-452c-a97d-99eff951dc39</uuid><memory>2097152</memory><currentMemory>2097152</currentMemory><maxMemory slots="16">8388608</maxMemory><vcpu current="1">16</vcpu><sysinfo type="smbios"><system><entry name="manufacturer">oVirt</entry><entry name="product">OS-NAME:</entry><entry name="version">OS-VERSION:</entry><entry name="serial">HOST-SERIAL:</entry><entry name="uuid">abee17b9-079e-452c-a97d-99eff951dc39</entry></system></sysinfo><clock offset="variable" adjustment="0"><timer name="rtc" tickpolicy="catchup"></timer><timer name="pit" tickpolicy="delay"></timer><timer name="hpet" present="no"></timer></clock><features><acpi></acpi></features><cpu match="exact"><model>SandyBridge</model><feature name="pcid" policy="require"></feature><feature name="spec-ctrl" policy="require"></feature><feature name="ssbd" policy="require"></feature><topology cores="1" threads="1" sockets="16"></topology><numa><cell id="0" cpus="0" memory="2097152"></cell></numa></cpu><cputune></cputune><devices><input type="mouse" bus="ps2"></input><channel type="unix"><target type="virtio" name="ovirt-guest-agent.0"></target><source mode="bind" path="/var/lib/libvirt/qemu/channels/abee17b9-079e-452c-a97d-99eff951dc39.ovirt-guest-agent.0"></source></channel><channel type="unix"><target type="virtio" name="org.qemu.guest_agent.0"></target><source mode="bind" path="/var/lib/libvirt/qemu/channels/abee17b9-079e-452c-a97d-99eff951dc39.org.qemu.guest_agent.0"></source></channel><rng model="virtio"><backend model="random">/dev/urandom</backend><alias name="ua-39b1e011-518c-4ca6-91c8-6ae63cea0824"></alias></rng><video><model type="qxl" vram="32768" heads="1" ram="65536" vgamem="16384"></model><alias name="ua-5de2d61a-2e0e-4194-b023-c1bfcb8f9f4e"></alias><address bus="0x00" domain="0x0000" function="0x0" slot="0x02" type="pci"></address></video><controller type="virtio-serial" index="0" ports="16"><alias name="ua-78c78899-4f5b-4217-95eb-d11ebf3b882e"></alias><address bus="0x00" domain="0x0000" function="0x0" slot="0x04" type="pci"></address></controller><controller type="usb" model="piix3-uhci" index="0"><address bus="0x00" domain="0x0000" function="0x2" slot="0x01" type="pci"></address></controller><memballoon model="virtio"><stats period="5"></stats><alias name="ua-94e7e4cb-9b07-4560-bb25-b02ef2b0cdbe"></alias><address bus="0x00" domain="0x0000" function="0x0" slot="0x06" type="pci"></address></memballoon><graphics type="spice" port="-1" autoport="yes" passwd="*****" passwdValidTo="1970-01-01T00:00:01" tlsPort="-1"><filetransfer enable="no"></filetransfer><channel name="main" mode="secure"></channel><channel name="inputs" mode="secure"></channel><channel name="cursor" mode="secure"></channel><channel name="playback" mode="secure"></channel><channel name="record" mode="secure"></channel><channel name="display" mode="secure"></channel><channel name="smartcard" mode="secure"></channel><channel name="usbredir" mode="secure"></channel><listen type="network" network="vdsm-ovirtmgmt"></listen></graphics><channel type="spicevmc"><target type="virtio" name="com.redhat.spice.0"></target></channel><interface type="bridge"><model type="virtio"></model><link state="up"></link><source bridge="external"></source><alias name="ua-b5ce5e56-0a45-4917-b60b-a83edae1c649"></alias><address bus="0x00" domain="0x0000" function="0x0" slot="0x03" type="pci"></address><boot order="2"></boot><mac address="00:1a:4a:1b:a4:01"></mac><mtu size="1500"></mtu><filterref filter="vdsm-no-mac-spoofing"></filterref><bandwidth></bandwidth></interface><disk type="file" device="cdrom" snapshot="no"><driver name="qemu" type="raw" error_policy="report"></driver><source file="" startupPolicy="optional"></source><target dev="hdc" bus="ide"></target><readonly></readonly><alias name="ua-70717d83-9339-426b-b954-0ed01f8d60db"></alias><address bus="1" controller="0" unit="0" type="drive" target="0"></address></disk><disk snapshot="no" type="file" device="disk"><target dev="vda" bus="virtio"></target><source file="/rhev/data-center/00000002-0002-0002-0002-0000000003c4/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8/21f73e32-2bd1-46db-a4cd-b0e01416954c"></source><driver name="qemu" io="threads" type="raw" error_policy="stop" cache="none"></driver><alias name="ua-ef5893bc-cbe0-4971-8884-a4547a65fcc8"></alias><boot order="1"></boot><serial>ef5893bc-cbe0-4971-8884-a4547a65fcc8</serial></disk><disk snapshot="no" type="file" device="disk"><target dev="vdb" bus="virtio"></target><source file="/rhev/data-center/00000002-0002-0002-0002-0000000003c4/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/9b913d5d-5103-44c8-9053-6a02f5dd3562/482698c2-b1bd-4715-9bc5-e222405260df"></source><driver name="qemu" io="threads" type="raw" error_policy="stop" cache="none"></driver><alias name="ua-9b913d5d-5103-44c8-9053-6a02f5dd3562"></alias><serial>9b913d5d-5103-44c8-9053-6a02f5dd3562</serial></disk></devices><pm><suspend-to-disk enabled="no"></suspend-to-disk><suspend-to-mem enabled="no"></suspend-to-mem></pm><os><type arch="x86_64" machine="pc-i440fx-rhel7.6.0">hvm</type><smbios mode="sysinfo"></smbios><bootmenu enable="yes" timeout="30000"></bootmenu></os><metadata><ovirt-tune:qos></ovirt-tune:qos><ovirt-vm:vm><ovirt-vm:minGuaranteedMemoryMb type="int">2048</ovirt-vm:minGuaranteedMemoryMb><ovirt-vm:clusterVersion>4.3</ovirt-vm:clusterVersion><ovirt-vm:custom></ovirt-vm:custom><ovirt-vm:device mac_address="00:1a:4a:1b:a4:01"><ovirt-vm:custom></ovirt-vm:custom></ovirt-vm:device><ovirt-vm:device devtype="disk" name="vda"><ovirt-vm:poolID>00000002-0002-0002-0002-0000000003c4</ovirt-vm:poolID><ovirt-vm:volumeID>21f73e32-2bd1-46db-a4cd-b0e01416954c</ovirt-vm:volumeID><ovirt-vm:imageID>ef5893bc-cbe0-4971-8884-a4547a65fcc8</ovirt-vm:imageID><ovirt-vm:domainID>c17d9d7f-e578-4626-a5d9-94ea555d7115</ovirt-vm:domainID></ovirt-vm:device><ovirt-vm:device devtype="disk" name="vdb"><ovirt-vm:poolID>00000002-0002-0002-0002-0000000003c4</ovirt-vm:poolID><ovirt-vm:volumeID>482698c2-b1bd-4715-9bc5-e222405260df</ovirt-vm:volumeID><ovirt-vm:imageID>9b913d5d-5103-44c8-9053-6a02f5dd3562</ovirt-vm:imageID><ovirt-vm:domainID>c17d9d7f-e578-4626-a5d9-94ea555d7115</ovirt-vm:domainID></ovirt-vm:device><ovirt-vm:launchPaused>false</ovirt-vm:launchPaused><ovirt-vm:resumeBehavior>auto_resume</ovirt-vm:resumeBehavior></ovirt-vm:vm></metadata></domain>', 'smpCoresPerSocket': '1', 'kvmEnable': 'true', 'bootMenuEnable': 'true', 'devices': [], 'custom': {}, 'maxVCpus': '16', 'statusTime': '4357298760', 'vmName': 'mortalkombat', 'maxMemSlots': 16}} from=::ffff:129.132.17.194,33924, flow_id=978c7200-b51e-42f8-962d-e8e11383ee53, vmId= (api:54) 2019-02-19 12:08:34,256+0100 INFO (jsonrpc/4) [jsonrpc.JsonRpcServer] RPC call VM.create succeeded in 0.04 seconds (__init__:312) 2019-02-19 12:08:34,257+0100 INFO (vm/abee17b9) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') VM wrapper has started (vm:2736) 2019-02-19 12:08:34,273+0100 INFO (vm/abee17b9) [vdsm.api] START getVolumeSize(sdUUID='c17d9d7f-e578-4626-a5d9-94ea555d7115', spUUID='00000002-0002-0002-0002-0000000003c4', imgUUID='ef5893bc-cbe0-4971-8884-a4547a65fcc8', volUUID='21f73e32-2bd1-46db-a4cd-b0e01416954c', options=None) from=internal, task_id=e0a3dd79-a36a-4ce2-97ac-d9b3f32cc81f (api:48) 2019-02-19 12:08:34,275+0100 INFO (vm/abee17b9) [vdsm.api] FINISH getVolumeSize return={'truesize': '10631581696', 'apparentsize': '21474836480'} from=internal, task_id=e0a3dd79-a36a-4ce2-97ac-d9b3f32cc81f (api:54) 2019-02-19 12:08:34,275+0100 INFO (vm/abee17b9) [vdsm.api] START getVolumeSize(sdUUID='c17d9d7f-e578-4626-a5d9-94ea555d7115', spUUID='00000002-0002-0002-0002-0000000003c4', imgUUID='9b913d5d-5103-44c8-9053-6a02f5dd3562', volUUID='482698c2-b1bd-4715-9bc5-e222405260df', options=None) from=internal, task_id=7337d2b1-0c2e-48c6-8e12-82d3d7313652 (api:48) 2019-02-19 12:08:34,277+0100 INFO (vm/abee17b9) [vdsm.api] FINISH getVolumeSize return={'truesize': '102303330304', 'apparentsize': '107374182400'} from=internal, task_id=7337d2b1-0c2e-48c6-8e12-82d3d7313652 (api:54) 2019-02-19 12:08:34,277+0100 INFO (vm/abee17b9) [vds] prepared volume path: (clientIF:499) 2019-02-19 12:08:34,277+0100 INFO (vm/abee17b9) [vdsm.api] START prepareImage(sdUUID='c17d9d7f-e578-4626-a5d9-94ea555d7115', spUUID='00000002-0002-0002-0002-0000000003c4', imgUUID='ef5893bc-cbe0-4971-8884-a4547a65fcc8', leafUUID='21f73e32-2bd1-46db-a4cd-b0e01416954c', allowIllegal=False) from=internal, task_id=e8780fff-1def-439c-854c-62478ccf6176 (api:48) 2019-02-19 12:08:34,302+0100 INFO (vm/abee17b9) [storage.StorageDomain] Fixing permissions on /rhev/data-center/mnt/scratch-inf.inf.ethz.ch:_export_scratch_ovirt_data/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8/21f73e32-2bd1-46db-a4cd-b0e01416954c (fileSD:622) 2019-02-19 12:08:34,302+0100 INFO (vm/abee17b9) [storage.StorageDomain] Creating domain run directory u'/var/run/vdsm/storage/c17d9d7f-e578-4626-a5d9-94ea555d7115' (fileSD:576) 2019-02-19 12:08:34,302+0100 INFO (vm/abee17b9) [storage.fileUtils] Creating directory: /var/run/vdsm/storage/c17d9d7f-e578-4626-a5d9-94ea555d7115 mode: None (fileUtils:199) 2019-02-19 12:08:34,303+0100 INFO (vm/abee17b9) [storage.StorageDomain] Creating symlink from /rhev/data-center/mnt/scratch-inf.inf.ethz.ch:_export_scratch_ovirt_data/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8 to /var/run/vdsm/storage/c17d9d7f-e578-4626-a5d9-94ea555d7115/ef5893bc-cbe0-4971-8884-a4547a65fcc8 (fileSD:579) 2019-02-19 12:08:34,306+0100 INFO (vm/abee17b9) [vdsm.api] FINISH prepareImage return={'info': {'path': u'/rhev/data-center/mnt/scratch-inf.inf.ethz.ch:_export_scratch_ovirt_data/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8/21f73e32-2bd1-46db-a4cd-b0e01416954c', 'type': 'file'}, 'path': u'/rhev/data-center/mnt/scratch-inf.inf.ethz.ch:_export_scratch_ovirt_data/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8/21f73e32-2bd1-46db-a4cd-b0e01416954c', 'imgVolumesInfo': [{'domainID': 'c17d9d7f-e578-4626-a5d9-94ea555d7115', 'leaseOffset': 0, 'path': u'/rhev/data-center/mnt/scratch-inf.inf.ethz.ch:_export_scratch_ovirt_data/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8/21f73e32-2bd1-46db-a4cd-b0e01416954c', 'volumeID': u'21f73e32-2bd1-46db-a4cd-b0e01416954c', 'leasePath': u'/rhev/data-center/mnt/scratch-inf.inf.ethz.ch:_export_scratch_ovirt_data/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8/21f73e32-2bd1-46db-a4cd-b0e01416954c.lease', 'imageID': 'ef5893bc-cbe0-4971-8884-a4547a65fcc8'}]} from=internal, task_id=e8780fff-1def-439c-854c-62478ccf6176 (api:54) 2019-02-19 12:08:34,306+0100 INFO (vm/abee17b9) [vds] prepared volume path: /rhev/data-center/mnt/scratch-inf.inf.ethz.ch:_export_scratch_ovirt_data/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/ef5893bc-cbe0-4971-8884-a4547a65fcc8/21f73e32-2bd1-46db-a4cd-b0e01416954c (clientIF:499) 2019-02-19 12:08:34,307+0100 INFO (vm/abee17b9) [vdsm.api] START prepareImage(sdUUID='c17d9d7f-e578-4626-a5d9-94ea555d7115', spUUID='00000002-0002-0002-0002-0000000003c4', imgUUID='9b913d5d-5103-44c8-9053-6a02f5dd3562', leafUUID='482698c2-b1bd-4715-9bc5-e222405260df', allowIllegal=False) from=internal, task_id=d04f3abb-f3d3-4e2f-902f-d3c5e4fabc36 (api:48) 2019-02-19 12:08:34,322+0100 INFO (vm/abee17b9) [vdsm.api] FINISH prepareImage error=Volume does not exist: (u'482698c2-b1bd-4715-9bc5-e222405260df',) from=internal, task_id=d04f3abb-f3d3-4e2f-902f-d3c5e4fabc36 (api:52) 2019-02-19 12:08:34,322+0100 ERROR (vm/abee17b9) [storage.TaskManager.Task] (Task='d04f3abb-f3d3-4e2f-902f-d3c5e4fabc36') Unexpected error (task:875) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 882, in _run return fn(*args, **kargs) File "<string>", line 2, in prepareImage File "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 50, in method ret = func(*args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/storage/hsm.py", line 3198, in prepareImage legality = dom.produceVolume(imgUUID, volUUID).getLegality() File "/usr/lib/python2.7/site-packages/vdsm/storage/sd.py", line 818, in produceVolume volUUID) File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line 800, in __init__ self._manifest = self.manifestClass(repoPath, sdUUID, imgUUID, volUUID) File "/usr/lib/python2.7/site-packages/vdsm/storage/fileVolume.py", line 71, in __init__ volUUID) File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line 86, in __init__ self.validate() File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line 112, in validate self.validateVolumePath() File "/usr/lib/python2.7/site-packages/vdsm/storage/fileVolume.py", line 131, in validateVolumePath raise se.VolumeDoesNotExist(self.volUUID) VolumeDoesNotExist: Volume does not exist: (u'482698c2-b1bd-4715-9bc5-e222405260df',) 2019-02-19 12:08:34,322+0100 INFO (vm/abee17b9) [storage.TaskManager.Task] (Task='d04f3abb-f3d3-4e2f-902f-d3c5e4fabc36') aborting: Task is aborted: "Volume does not exist: (u'482698c2-b1bd-4715-9bc5-e222405260df',)" - code 201 (task:1181) 2019-02-19 12:08:34,322+0100 ERROR (vm/abee17b9) [storage.Dispatcher] FINISH prepareImage error=Volume does not exist: (u'482698c2-b1bd-4715-9bc5-e222405260df',) (dispatcher:81) 2019-02-19 12:08:34,322+0100 ERROR (vm/abee17b9) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') The vm start process failed (vm:937) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 866, in _startUnderlyingVm self._run() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2749, in _run self._devices = self._make_devices() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2589, in _make_devices disk_objs = self._perform_host_local_adjustment() File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 2662, in _perform_host_local_adjustment self._preparePathsForDrives(disk_params) File "/usr/lib/python2.7/site-packages/vdsm/virt/vm.py", line 1011, in _preparePathsForDrives drive['path'] = self.cif.prepareVolumePath(drive, self.id) File "/usr/lib/python2.7/site-packages/vdsm/clientIF.py", line 415, in prepareVolumePath raise vm.VolumeError(drive) VolumeError: Bad volume specification {'index': 1, 'domainID': 'c17d9d7f-e578-4626-a5d9-94ea555d7115', 'reqsize': '0', 'name': 'vdb', 'truesize': '102303330304', 'alias': 'ua-9b913d5d-5103-44c8-9053-6a02f5dd3562', 'format': 'raw', 'discard': False, 'volumeID': '482698c2-b1bd-4715-9bc5-e222405260df', 'apparentsize': '107374182400', 'diskType': 'file', 'specParams': {}, 'iface': 'virtio', 'cache': 'none', 'propagateErrors': 'off', 'poolID': '00000002-0002-0002-0002-0000000003c4', 'device': 'disk', 'path': '/rhev/data-center/00000002-0002-0002-0002-0000000003c4/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/9b913d5d-5103-44c8-9053-6a02f5dd3562/482698c2-b1bd-4715-9bc5-e222405260df', 'serial': '9b913d5d-5103-44c8-9053-6a02f5dd3562', 'imageID': '9b913d5d-5103-44c8-9053-6a02f5dd3562', 'type': 'disk'} 2019-02-19 12:08:34,322+0100 INFO (vm/abee17b9) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') Changed state to Down: Bad volume specification {'index': 1, 'domainID': 'c17d9d7f-e578-4626-a5d9-94ea555d7115', 'reqsize': '0', 'name': 'vdb', 'truesize': '102303330304', 'alias': 'ua-9b913d5d-5103-44c8-9053-6a02f5dd3562', 'format': 'raw', 'discard': False, 'volumeID': '482698c2-b1bd-4715-9bc5-e222405260df', 'apparentsize': '107374182400', 'diskType': 'file', 'specParams': {}, 'iface': 'virtio', 'cache': 'none', 'propagateErrors': 'off', 'poolID': '00000002-0002-0002-0002-0000000003c4', 'device': 'disk', 'path': '/rhev/data-center/00000002-0002-0002-0002-0000000003c4/c17d9d7f-e578-4626-a5d9-94ea555d7115/images/9b913d5d-5103-44c8-9053-6a02f5dd3562/482698c2-b1bd-4715-9bc5-e222405260df', 'serial': '9b913d5d-5103-44c8-9053-6a02f5dd3562', 'imageID': '9b913d5d-5103-44c8-9053-6a02f5dd3562', 'type': 'disk'} (code=1) (vm:1675) 2019-02-19 12:08:34,326+0100 INFO (vm/abee17b9) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') Stopping connection (guestagent:455) 2019-02-19 12:08:34,330+0100 INFO (jsonrpc/5) [api.virt] START destroy(gracefulAttempts=1) from=::ffff:129.132.17.194,33924, vmId=abee17b9-079e-452c-a97d-99eff951dc39 (api:48) 2019-02-19 12:08:34,331+0100 INFO (jsonrpc/5) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') Release VM resources (vm:5127) 2019-02-19 12:08:34,331+0100 WARN (jsonrpc/5) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') trying to set state to Powering down when already Down (vm:624) 2019-02-19 12:08:34,331+0100 INFO (jsonrpc/5) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') Stopping connection (guestagent:455) 2019-02-19 12:08:34,331+0100 INFO (jsonrpc/5) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') Stopping connection (guestagent:455) 2019-02-19 12:08:34,331+0100 WARN (jsonrpc/5) [root] File: /var/lib/libvirt/qemu/channels/abee17b9-079e-452c-a97d-99eff951dc39.ovirt-guest-agent.0 already removed (fileutils:54) 2019-02-19 12:08:34,332+0100 WARN (jsonrpc/5) [root] File: /var/lib/libvirt/qemu/channels/abee17b9-079e-452c-a97d-99eff951dc39.org.qemu.guest_agent.0 already removed (fileutils:54) 2019-02-19 12:08:34,332+0100 WARN (jsonrpc/5) [virt.vm] (vmId='abee17b9-079e-452c-a97d-99eff951dc39') timestamp already removed from stats cache (vm:2395) 2019-02-19 12:08:34,332+0100 INFO (jsonrpc/5) [vdsm.api] START inappropriateDevices(thiefId='abee17b9-079e-452c-a97d-99eff951dc39') from=::ffff:129.132.17.194,33924, task_id=9474f7a3-9938-464e-ad08-ba61c6c528c9 (api:48) 2019-02-19 12:08:34,333+0100 INFO (jsonrpc/5) [vdsm.api] FINISH inappropriateDevices return=None from=::ffff:129.132.17.194,33924, task_id=9474f7a3-9938-464e-ad08-ba61c6c528c9 (api:54) 2019-02-19 12:08:34,522+0100 INFO (jsonrpc/5) [root] /usr/libexec/vdsm/hooks/after_vm_destroy/50_vhostmd: rc=0 err= (hooks:114) 2019-02-19 12:08:34,656+0100 INFO (jsonrpc/5) [root] /usr/libexec/vdsm/hooks/after_vm_destroy/delete_vhostuserclient_hook: rc=0 err= (hooks:114) 2019-02-19 12:08:34,657+0100 INFO (jsonrpc/5) [api.virt] FINISH destroy return={'status': {'message': 'Machine destroyed', 'code': 0}} from=::ffff:129.132.17.194,33924, vmId=abee17b9-079e-452c-a97d-99eff951dc39 (api:54) 2019-02-19 12:08:34,657+0100 INFO (jsonrpc/5) [jsonrpc.JsonRpcServer] RPC call VM.destroy succeeded in 0.33 seconds (__init__:312)

6 years, 2 months

3
3
0 / 0

[ANN] oVirt 4.3.1 First Release Candidate is now available

by Sandro Bonazzola

The oVirt Project is pleased to announce the availability of the oVirt 4.3.1 First Release Candidate, as of February 20th, 2019. This update is a release candidate of the first in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later * oVirt Node 4.3 (available for x86_64 only) Experimental tech preview for x86_64 and s390x architectures for Fedora 28 is also included. See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available for EL7 only - oVirt Node is available for EL7 only [2] - Fedora 28 based appliance and node couldn't be built due to a bug in Lorax (the tool used to build the images) affecting Fedora 28. Additional Resources: * Read more about the oVirt 4.3.1 release highlights: http://www.ovirt.org/release/4.3.1/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.1/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

6 years, 2 months

1
0
0 / 0

Re: Unable to upload images

by Nir Soffer

On Tue, Feb 19, 2019 at 11:29 PM Michael Blanchard <michael(a)wanderingmad.com> wrote: > I don't even get the that point. I try to upload to he Kemp Roadmaster > vm in .disk format and it says not in proper format and errors out. No log > entries anuwhere > What is "Kemp Roadmaster vm in .disk format"? Can you run this on the machine with this file? ls -l /path/to/disk Also this can help to understand the issue: qemu-img info /path/to/disk Nir > > Get Outlook for Android <https://aka.ms/ghei36> > > ------------------------------ > *From:* Shani Leviim <sleviim(a)redhat.com> > *Sent:* Tuesday, February 19, 2019 10:50:20 AM > *To:* Michael Blanchard > *Cc:* users; Nir Soffer; Daniel Erez > *Subject:* Re: [ovirt-users] Unable to upload images > > Also, can you please share the output of 'ls -l' executed on the image > you're trying to upload? > > > *Regards, * > > *Shani Leviim * > > > On Tue, Feb 19, 2019 at 3:52 PM Shani Leviim <sleviim(a)redhat.com> wrote: > >> Hi, >> Can you please share engine and UI logs? >> Also, can you please attach a screenshot? >> >> >> *Regards, * >> >> *Shani Leviim * >> >> >> On Tue, Feb 19, 2019 at 1:54 AM <michael(a)wanderingmad.com> wrote: >> >>> I just updated my ovirt to the latest, and now I can't upload images >>> that I used to be able to. I can upload and see the nagio xi virtual >>> appliance, but I can't upload .disk files anymore, I get a red error in GUI >>> and it say image file not supported, but I used to be able to upload same >>> file in previous version with no issue >>> _______________________________________________ >>> Users mailing list -- users(a)ovirt.org >>> To unsubscribe send an email to users-leave(a)ovirt.org >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: >>> https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: >>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/EM3RUQQ6NJ5... >>> >> This email and any files transmitted with it are confidential and > intended solely for the use of the individual or entity to whom they are > addressed. If you have received this email in error please notify the > system manager. This message contains confidential information and is > intended only for the individual named. If you are not the named addressee > you should not disseminate, distribute or copy this e-mail. Please notify > the sender immediately by e-mail if you have received this e-mail by > mistake and delete this e-mail from your system. If you are not the > intended recipient you are notified that disclosing, copying, distributing > or taking any action in reliance on the contents of this information is > strictly prohibited. >

6 years, 2 months

3
3
0 / 0

Re: Creating a static route

by Lev Veyde

Hi Doug, Thanks for the update, I'm glad that we could help and everything worked out just fine! I also opened a BZ, asking to add a note in the documentation regarding this issue. Thanks in advance, On Mon, Feb 18, 2019 at 7:15 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> wrote: > Lev, > > Just wanted to update you on the progress. We created the persistent > static routes and rules and the data is routing correctly over the required > gateway. > > > > Thank you for all of your help!!! > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Thursday, February 14, 2019 9:14 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > Just one more thing that I forgot to mention, even though it may be > obvious - you can use subnets in both rules and routes. > > So if all the IPs you want to route sit in the same subnet then you can > contain them with a single command e.g. "to 172.22.20.0/24 priority 32764" > > Thanks in advance, > > > > On Thu, Feb 14, 2019 at 4:59 PM Lev Veyde <lveyde(a)redhat.com> wrote: > > Hi Doug, > > Sure, np. > > > > >> 1. - yes it is the priority setting of the specific rule. Basically you > put in the file the post "ip rule add" part of the command e.g. for "ip > rule add to 172.22.20.31 priority 32764" you need to put a line of "to > 172.22.20.31 priority 32764" > > >> 2. - yes, the same priority can be used for all of them. E.g. if you > want to route 172.22.20.31, 172.22.34.56 and 172.22.67.89 you will need to > add: > > to 172.22.20.31 priority 32764 > to 172.22.34.56 priority 32764 > to 172.22.67.89 priority 32764 > > into the rule-<interface name> file e.g. rule-ovirtmgmt or rule-eno3. > > > > Please note that you will also need to add the static route for each one > of these as well w/ "ip route add ... " command e.g. "ip route add > 172.22.20.31 via 172.21.12.61". > > You can also use the route-<interface name> putting just the route info > part, similar to the "ip rule" e.g. for equivalent of "ip route add > 172.22.20.31 via 172.21.12.61" you need put in the file a line with the > content "172.22.20.31 via 172.21.12.61". > > For routes it's important to use specifically the route-ovirtmgmt file > since the script automatically adds the device to the route command i.e. > you can put the following lines into your route-ovirtmgmt file: > > 172.22.20.31 via 172.21.12.61 > 172.22.34.56 via 172.21.12.61 > 172.22.67.89 via 172.21.12.68 > > (In case the first 2 of the mentioned IPs should be routed through the > 172.21.12.61 gateway, and the last one should be routed through the > 172.21.12.68 gateway). > > > > For the reference you can take a look at the > /etc/sysconfig/network-scripts/ifup-routes script. > It does the actual processing of both "route" and "rule" files for all > network interfaces on a system. > > > > Please feel free to contact if you have further questions. > > > > Thanks in advance, > > > > On Thu, Feb 14, 2019 at 3:39 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Thanks for the response. I was just getting ready to contact you about > this. I do have 2 follow-up questions, if you don’t mind. > > > > 1. When we were talking about creating the route that would be enabled > again after a reboot, you said to modify “the > /etc/sysconfig/network-scripts/rule-<interface name> e.g. rule-ovirtmgmt or > rule-eno3 (just put in the file "to 172.22.20.31 priority 32764”. Is > priority 32764 for the ip rule command? > 2. If I have multiple IPs that I would need to create a static route, > would the priority be 32764 for all of them? > > > > Once again, thank you for all of your help with this!! > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Thursday, February 14, 2019 3:19 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > Sorry that it took a bit of time to get back to you. > Managed to catch today somebody from the oVirt/RHV network team to discuss > the issue. > > It seems that we don't currently support custom static routes on the > hosts, so the workaround that I suggested is the way to do it. > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 11:12 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Will do. Thanks again for all your help!! Looking forward to a > confirmation of the fix or a different solution. Either way, I know I have > a working fix. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 3:09 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > Just a small note - the commands in the rc.local should be placed *before* > the very last line (the touch ... command). > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 10:56 PM Lev Veyde <lveyde(a)redhat.com> wrote: > > Hi Doug, > > Thanks, you're welcome! > > It's generally possible to add persistent rules by either using the legacy > /etc/rc.d/rc.local boot script (chmod +x /etc/rc.d/rc.local and put the > relevant commands at the end of the file, that way you can actually run any > commands) or by using the /etc/sysconfig/network-scripts/rule-<interface > name> e.g. rule-ovirtmgmt or rule-eno3 (just put in the file "to > 172.22.20.31 priority 32764" - without quotes), however of course this > needs to be tested to verify that it works. > > I forwarded the issue to the network team and hopefully they will update > soon. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 10:17 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > You have no idea how helpful you have been!!!!!! I’ve been having this > issue for over 2 months and starting to cause major problems. > > > > Please let me know if you find a better solution. I’m going to wait to > hear back from you before implementing. > > > > If we go with this workaround, is there a way to add the ip rule so it’s > persistent? I know how to make the ip route add persistent. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 2:14 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > Yes, it looks like it did. > > I'll try to catch somebody from my local oVirt/RHV networking team to take > a look at this issue, maybe there is a better solution for that issue than > my workaround. > > > > But meanwhile you can use this workaround (ip route add + ip rule add), > just please be aware that these should be run after each host reboot, since > these commands are not persistent. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 10:07 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Here’s the results. It appears to fix the issue!! > > > > From non-working system: > > > > -bash-4.2# ip rule add to 172.22.20.31 priority 32764 > > > > -bash-4.2# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 CenteraAmesAN1.emcins.com (172.21.12.61) 0.487 ms 1.082 ms 1.313 ms > > 2 192.168.90.9 (192.168.90.9) 1.507 ms 2.090 ms 2.294 ms > > 3 pdputopcomm01.emcins.com (172.22.20.31) 1.403 ms 1.401 ms 1.348 ms > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 2:01 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > OK, I think that I have a guess of what may have happened here... > > Can you please run the following command on the (non-working) host: > > ip rule add to 172.22.20.31 priority 32764 > > > > This needs to be run in addition to the ip route add ... command. > > > > And then please run the traceroute command and let me know if that fixed > the issue. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 9:30 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Here you go. > > > > From non-working system > > > > -bash-4.2# ip rule > > 0: from all lookup local > > 32764: from all to 172.21.0.0/16 iif ovirtmgmt lookup 2887058719 > > 32765: from 172.21.0.0/16 lookup 2887058719 > > 32766: from all lookup main > > 32767: from all lookup default > > > > > > From working system > > > > [root@paputopcomm04 ~]# ip rule > > 0: from all lookup local > > 32766: from all lookup main > > 32767: from all lookup default > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 12:35 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > That shouldn't really matter, since ovirtmgmt is just a bridged interface, > and unless I'm missing something it shouldn't really affect routing. > > Can you please also provide the output of "ip rule" from both working and > non-working hosts ? > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 8:01 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Here’s the ip route from the server that worked and didn’t work > > > > IP Route from server that worked > > > > [root@paputopcomm04 ~]# ip route > > default via 172.21.0.250 dev eno3 > > 169.254.0.0/16 dev eno3 scope link metric 1002 > > 169.254.0.0/16 dev eno4 scope link metric 1005 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18 > > 172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34 > > *172.22.20.31 via 172.21.12.61 dev eno3* > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34 > > > > > > > > IP Route from server that didn't work > > > > -bash-4.2# ip route > > default via 172.21.0.250 dev ovirtmgmt > > 169.254.0.0/16 dev eno4 scope link metric 1004 > > 169.254.0.0/16 dev ovirtmgmt scope link metric 1021 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.15 > > 172.21.0.0/16 dev ovirtmgmt proto kernel scope link src 172.21.5.31 > > *172.22.20.31 via 172.21.12.61 dev ovirtmgmt* > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.31 > > > > We have had our network team look and they don’t know. As I said, the was > setup by Commvault. It’s almost like the ovirtmgmt interface will not > allow a route add due to the way it’s configured? They, Commvault, are > trying different things within their software to get this working, but it’s > causing us more problems. I figured I would take a shot and see if > someone, who works with the oVirt software, would have any ideas. > > > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 11:51 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > This is indeed quite weird... > > It looks like the OS for some reason disregards the static route that you > have added. > > BTW, have you verified that it's indeed was added by running "ip route" > following the "ip route add ..." command ? > > Maybe somebody from the network team has an idea of what may be the cause > of this issue... > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 7:36 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > I’m showing you the same outputs (ip a, ip route, traceroute, ip route > add, and traceroute) from another server in this group that doesn’t use the > ovirtmgmt for it’s default interface. > > > > [root@paputopcomm04 ~]# ip a > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > inet 127.0.0.1/8 scope host lo > > valid_lft forever preferred_lft forever > > inet6 ::1/128 scope host > > valid_lft forever preferred_lft forever > > 2: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:db:bc:c0 brd ff:ff:ff:ff:ff:ff > > inet 172.21.5.34/16 brd 172.21.255.255 scope global eno3 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fedb:bcc0/64 scope link > > valid_lft forever preferred_lft forever > > 3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:e8:da:03 brd ff:ff:ff:ff:ff:ff > > inet 172.26.5.34/16 brd 172.26.255.255 scope global eno1 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fee8:da03/64 scope link > > valid_lft forever preferred_lft forever > > 4: eno2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN > qlen 1000 > > link/ether 90:1b:0e:e8:da:04 brd ff:ff:ff:ff:ff:ff > > 5: eno4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:db:bc:c1 brd ff:ff:ff:ff:ff:ff > > inet 172.17.53.18/16 brd 172.17.255.255 scope global eno4 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fedb:bcc1/64 scope link > > valid_lft forever preferred_lft forever > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# ip route > > default via 172.21.0.250 dev eno3 > > 169.254.0.0/16 dev eno3 scope link metric 1002 > > 169.254.0.0/16 dev eno4 scope link metric 1005 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18 > > 172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34 > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34 > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 ames-acc1-agg-1.emcins.com (172.21.0.246) 1.081 ms 1.816 ms 1.832 ms > > 2 192.168.200.30 (192.168.200.30) 0.639 ms 192.168.200.14 > (192.168.200.14) 1.063 ms 1.577 ms > > 3 192.168.200.101 (192.168.200.101) 3.110 ms ames-sw-wanrtr.emcins.com > (192.168.200.97) 3.191 ms 3.277 ms > > 4 192.168.100.26 (192.168.100.26) 4.146 ms 4.273 ms 4.394 ms > > 5 192.168.100.98 (192.168.100.98) 1.893 ms 2.364 ms 2.397 ms > > 6 192.168.100.50 (192.168.100.50) 5.707 ms 192.168.100.33 > (192.168.100.33) 5.134 ms 192.168.100.50 (192.168.100.50) 4.105 ms > > 7 pdputopcomm01.emcins.com (172.22.20.31) 1.359 ms 1.374 ms 1.351 ms > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# ip route add 172.22.20.31 via 172.21.12.61 > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 CenteraAmesAN1.emcins.com (172.21.12.61) 6.184 ms 6.475 ms 6.686 ms > > 2 192.168.90.9 (192.168.90.9) 1.770 ms 1.979 ms 2.189 ms > > 3 pdputopcomm01.emcins.com (172.22.20.31) 1.405 ms * 1.354 ms > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 11:07 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > In most cases it should not be required, especially as my guess (again it > would be easier if you could post the output of the "ip a" and "ip route") > is that the eno1 is part of the ovirtmgmt bridge. > > What is the output of the "traceroute 172.22.20.31" that you get on the > host after you have added the static route? > > Thanks in advance, > > > > > > On Tue, Feb 12, 2019 at 6:58 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > One other question, since there are multiple enabled interfaces (ovirtmgmt > and eno1), do I need to specify an interface for the route add. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:50 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What do you mean by "static route is refused"? > > What is the error message(s) you see? > > > > Can you please try to add the route with the following command: > > ip route add 172.22.20.31 via 172.21.12.61 > > > > If that doesn't work, then please provide more details, i.e. what is the > exact error message(s) you see, the version of your OS and oVirt, output of > "ip a" and "ip route" on your host(s), so that it will be easier to help > you. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 6:43 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Thanks for your response. > > > > If I attempt to manually add the route using route add: > > > > route add -net 172.22.20.31 netmask 255.255.255.255 gw 172.21.12.61 dev > ovirtmgmt > > > > This static route is refused and all traffic is routed over the default > gateway. > > > > But if I use a server that doesn’t use the ovirtmgmt interface and set the > same static route, the required data is routed correctly over that static > route. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:34 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What is the exact problem you are having while attempting to add a static > route on the hosts? > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 5:23 PM <doug.l.maxfield(a)emcins.com> wrote: > > Good Morning, > New to oVirt. We are using this with a backup solution from Commvault. > The issue that we are having is that we need to setup a static route for > specific data between 2 remote sites. The ovirtmgmt is configured with the > correct IP and gateway for the server. We need to route data over a > different gateway so that we don't "max out" the default network connection > between the 2 sites. Example below > > Ovirtmgmt IP - 172.21.5.31 > Gateway IP - 172.21.0.250 > > We need any traffic with a destination of 172.22.20.31(Remote site) to > route over this gateway, 172.21.12.61 > > There are multiple servers in this configuration. Servers that are not > using the ovirtmgmt interface for their default, we are able to route the > data. The only problem is with attempting to setup a different static > route on the ovirtmgmt interfaces. > > Thanks in advance for any help!!! > > Doug > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGXSLHAP3X5... > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > NOTICE: This message (including any attachments) is intended for a > specific individual and may contain information that is either confidential > or legally protected. If you believe that it has been sent to you in > error, please reply to the sender that you have received the message in > error, then delete it. If you are not the intended recipient, you are > hereby notified that any retention, dissemination, distribution, or copying > of this communication is strictly prohibited. Thank you. EMC071856 > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

6 years, 2 months

3
4
0 / 0

Ovirt project source code download problem

by xilazz＠126.com

Hi,The dear. May I ask where I can find the source code of ovirt project? I want to test the environment through compilation and installation. At present, most of the methods are online installation, so I cannot modify some contents. Thank you very much for your help. Thank you very much.

6 years, 2 months

3
3
0 / 0

How to upgrade ovirt node host?

by adam_xu＠adagene.com.cn

How, everyone. I have upgraded my engine from 4.2.8 to 4.3.0. but when I check upgrade for the node host, there's no updates available for upgrade. I checked the repo file in the host, two files available: /etc/yum.repos.d/ovirt-4.2.repo /etc/yum.repos.d/ovirt-4.2-dependencies.repo The documentation seems to be out of date. https://www.ovirt.org/documentation/upgrade-guide/chap-Updates_between_Mi... so How could I upgrade my node hosts to ovirt 4.3 ? yours Adam

6 years, 2 months

5
6
0 / 0

VM stats are not shown in HE-web interface and MOM is not available

by v.voroncov＠scanru.ru

So the problem is that virtual machine statistics are not shown in Ovirt Virualization Manager and something is wrong with MOM service. [root@ovirt-04 ~]# service vdsmd status Redirecting to /bin/systemctl status vdsmd.service ● vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor preset: enabled) Active: active (running) since Tue 2019-02-19 17:13:31 MSK; 16h ago Main PID: 17676 (vdsmd) Tasks: 63 CGroup: /system.slice/vdsmd.service ├─17676 /usr/bin/python2 /usr/share/vdsm/vdsmd ├─26249 /usr/libexec/ioprocess --read-pipe-fd 77 --write-pipe-fd 76 --max-threads 10 --max-queued-requests 10 └─26269 /usr/libexec/ioprocess --read-pipe-fd 82 --write-pipe-fd 81 --max-threads 10 --max-queued-requests 10 Feb 20 09:11:14 ovirt-04.scanru.local vdsm[17676]: WARN MOM not available. Feb 20 09:11:14 ovirt-04.scanru.local vdsm[17676]: WARN MOM not available, KSM stats will be missing. Feb 20 09:23:47 ovirt-04.scanru.local vdsm[17676]: WARN MOM not available. Feb 20 09:23:47 ovirt-04.scanru.local vdsm[17676]: WARN MOM not available, KSM stats will be missing. Feb 20 09:36:20 ovirt-04.scanru.local vdsm[17676]: WARN MOM not available. Feb 20 09:36:20 ovirt-04.scanru.local vdsm[17676]: WARN MOM not available, KSM stats will be missing. Feb 20 09:48:53 ovirt-04.scanru.local vdsm[17676]: WARN MOM not available. Feb 20 09:48:53 ovirt-04.scanru.local vdsm[17676]: WARN MOM not available, KSM stats will be missing. Feb 20 10:01:25 ovirt-04.scanru.local vdsm[17676]: WARN MOM not available. Feb 20 10:01:25 ovirt-04.scanru.local vdsm[17676]: WARN MOM not available, KSM stats will be missing.

6 years, 2 months

2
1
0 / 0

ovirt 4.2.7.1 fails to deploy hosted engine on GlusterFS

by hunter86_bg＠yahoo.com

Hello Community, I'm trying to deploy a hosted engine on GlusterFS which fails with the following error: [ INFO ] TASK [Add glusterfs storage domain] [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[Failed to fetch Gluster Volume List]". HTTP response code is 400. [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "deprecations": [{"msg": "The 'ovirt_storage_domains' module is being renamed 'ovirt_storage_domain'", "version": 2.8}], "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Failed to fetch Gluster Volume List]\". HTTP response code is 400."} I have deployed GlusterFS via the HyperConverged Option in Cockpit and the volumes are up and running. [root@ovirt1 ~]# gluster volume status engine Status of volume: engine Gluster process TCP Port RDMA Port Online Pid ------------------------------------------------------------------------------ Brick ovirt1:/gluster_bricks/engine/engine 49152 0 Y 26268 Brick ovirt2:/gluster_bricks/engine/engine 49152 0 Y 24116 Brick glarbiter:/gluster_bricks/engine/engi ne 49152 0 Y 23526 Self-heal Daemon on localhost N/A N/A Y 31229 Self-heal Daemon on ovirt2 N/A N/A Y 27097 Self-heal Daemon on glarbiter N/A N/A Y 25888 Task Status of Volume engine ------------------------------------------------------------------------------ There are no active volume tasks I'm using the following guide : https://ovirt.org/blog/2018/02/up-and-running-with-ovirt-4-2-and-gluster-... And on step 4 - Storage - I have defined it as follows: Storage Type: Gluster Storage Connection: ovirt1.localdomain:/gluster_bricks/engine/ Mount Options: backup-volfile-servers=ovirt2.localdomain:glarbiter.localdomain Can someone hint me where is the problem ?

6 years, 2 months

3
15
0 / 0

stucked snapshot, locked disk

by Jiří Sléžka

Hello, we are using ovirt 4.2.8.2-1.el7. One our user probably tried to preview taken snapshot but the task is stucked and never finished. Also disk is locked. Here is engine.log https://pastebin.com/izBJ1BUg I am not sure what went wrong except one java.lang.NullPointerException error... Could it be some bug? Also I would like to unlock disk and clean this task. I can see locked snapshot and disk [root@ovirt dbutils]# ./unlock_entity.sh -q -t snapshot -c Locked snapshots vm_id | snapshot_id --------------------------------------+-------------------------------------- df27ee13-9961-41d5-a4eb-bbb0aadf9086 | 58998020-08cb-4c84-8847-0cb6790724ba [root@ovirt dbutils]# ./unlock_entity.sh -q -t disk -c Locked disks vm_id | disk_id --------------------------------------+-------------------------------------- df27ee13-9961-41d5-a4eb-bbb0aadf9086 | f6405448-baf8-4cc2-8ee7-798ca11cad10 but no runnig tasks [root@ovirt dbutils]# ./taskcleaner.sh -o t but in ovirt-manager I see this stucked task... Preview VM Snapshot predsysprep of VM install_10_64bit_LTSB_UK_ucebny - Started: Feb 12, 2019, 11:28:04 AM Validating - Completed: Feb 12, 2019, 11:28:04 AM Executing - Completed: Feb 12, 2019, 11:28:15 AM Creating Volume - Completed: Feb 12, 2019, 11:28:15 AM Finalizing - Started: Feb 12, 2019, 11:28:15 AM what is best approach to unlock and clean this? Thanks in advance, Cheers, Jiri

6 years, 2 months

6
7
0 / 0

ovirt node installation and deploy...

by matteo fedeli

Hi at all, during the deployment the system fail... http://oi63.tinypic.com/et9kd4.jpg During installation it's corretct select all disks? All disk must be without any partition table? My target is on the first disk ovirt node, second vmstore/engine volume and third for data. By watching this image, https://access.redhat.com/webassets/avalon/d/Red_Hat_Hyperconverged_Infra... How can I set the LV size correctly?

6 years, 2 months

2
6
0 / 0

Re: Migration of VMs across two Ovirt setups

by Luca 'remix_tj' Lorenzetto

Hello Dipak, i didn't used export domains, but directly data domain, which avoided me the long time of copying and importing back before powering on. Luca On Tue, Feb 19, 2019 at 8:59 AM Dipak D. Chaudhari <ddc.comp(a)gmail.com> wrote: > > > Thanks > > Migrated in same way. > > 1] Created new nfs export domain on Local data center > 2] Added export domain to local data center > 3] Powered off all VMs and exported all VM and related templates to export domain > 4] Enabled maintenance for domain and detached from Local Data Center Setup > 5] Added nfs domain created in step 1 to another Data Center > 6] Imported VMs with templates > 7] Enabled maintenance for domain and detached from Data Center > 8] Dismantled local data center > > Done :) > > > > > > On Mon, Feb 18, 2019 at 3:21 PM Luca 'remix_tj' Lorenzetto <lorenzetto.luca(a)gmail.com> wrote: >> >> Hello Dipak, >> >> we shut down all the vms in a storage domain, detached and then >> imported on the new environment. Once imported we moved the vms to a >> newer storage and the old one removed. >> >> I don't know what can happen with local storage, but i think works >> like shared storage. >> >> Luca >> >> On Sat, Feb 16, 2019 at 6:39 AM <ddc.comp(a)gmail.com> wrote: >> > >> > Hi, >> > >> > I have two ovirt setups having multiple hosts and cluster and around 100+ vms in one and around 32 in one setup. >> > >> > I want to dismantle one setup and before before doing so all vms are need to be migrated to one setup >> > >> > I tried with import vms from another setup using Libvert -- https://ovirt.org/develop/release-management/features/virt/KvmToOvirt.html but no luck connection not getting established. >> > >> > What if I simply remove one host from one setup having local storage(all vms are located on local storage) and simply add it to another setup? and then migrate VMs from local to shared storage and then dismantle host ! >> > >> > >> > Regards >> > Dipak Chaudhari >> > _______________________________________________ >> > Users mailing list -- users(a)ovirt.org >> > To unsubscribe send an email to users-leave(a)ovirt.org >> > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ >> > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/NWV54RQGZWP... >> >> >> >> -- >> "E' assurdo impiegare gli uomini di intelligenza eccellente per fare >> calcoli che potrebbero essere affidati a chiunque se si usassero delle >> macchine" >> Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716) >> >> "Internet è la più grande biblioteca del mondo. >> Ma il problema è che i libri sono tutti sparsi sul pavimento" >> John Allen Paulos, Matematico (1945-vivente) >> >> Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , <lorenzetto.luca(a)gmail.com> > > > > -- > > Thanks & Regards, > Dipak D. Chaudhari > > -- "E' assurdo impiegare gli uomini di intelligenza eccellente per fare calcoli che potrebbero essere affidati a chiunque se si usassero delle macchine" Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716) "Internet è la più grande biblioteca del mondo. Ma il problema è che i libri sono tutti sparsi sul pavimento" John Allen Paulos, Matematico (1945-vivente) Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , <lorenzetto.luca(a)gmail.com>

6 years, 2 months

1
0
0 / 0

Cho thue xe 35 cho di cua khau Mong Cai - Quang Ninh

by anddyn810＠gmail.com

<div data-redactor="1">Vào những dịp nghỉ lễ hay đơn giản là dịp cuối tuần, nếu quý khách chưa tìm được một địa điểm nào thú vị để du lịch cùng gia đình và bạn bè thì tại sao không thử một lần khám phá những cửa khẩu quốc tế - nơi cửa ngõ quốc gia để trải nghiệm những cảm giác thú vị? Ngọc Minh đưa ra dịch vụ <b><i><a href="http://thuexeotongocminh.com/dia-chi-cho-thue-xe-35-cho-gia-re-uy-tin-tai...">Cho thuê xe 35 chỗ</a></i></b> đi cửa khẩu Móng Cái – Quảng Ninh nhằm phục vụ nhu cầu đó của khách hàng.</div> <br> <div data-redactor="1"><b><span style="color: #ff0000;" data-redactor="1">Liên hệ cho thuê xe 35 chỗ tham quan Cửa khẩu Móng Cái: 0983.22.9996 – 0967.27.9998</span></b></div> <br> <div data-redactor="1"><b>Ngọc Minh cho thuê xe 35 chỗ tham quan Cửa khẩu Móng Cái</b></div> <br> <div data-redactor="1"><i>Thông tin về lịch trình cho thuê xe 7 chỗ tham quan Cửa khẩu Móng Cái</i></div> <br> <div data-redactor="1">- Lịch trình: Đón tại Hà Nội – Cửa khẩu Móng Cái – Trả về Hà Nội</div> <br> <div data-redactor="1">- Số km dự kiến: 314km/ chiều</div> <br> <div data-redactor="1">- Cung đường đi: Qua QL5B – QL18</div> <br> <div data-redactor="1">- Thời gian di chuyển: 5 giờ 22 phút</div> <br> <div data-redactor="1"><i>Dòng xe cho thuê xe 35 chỗ tham quan Cửa khẩu Móng Cái</i></div> <br> <div data-redactor="1">Với nhiều năm hoạt động trong lĩnh vực du lịch vận tải, Ngọc Minh luôn gây được lòng tin với khách hàng bởi sự đảm bảo chất lượng xe và độ an toàn trong các chuyến đi. Quý khách hoàn toàn có thể lựa chọn dòng xe 35 chỗ tại công ty chúng tôi cho chuyến đi gia đình hay nhóm bạn của mình. Bởi dòng xe 35 chỗ tại Ngọc Minh đều là xe đời mới, nội thất đầy đủ, sang trọng, mang lại cảm giác thoải mái nhất cho khách hàng. Hiện tại chúng tôi đang có các loại xe 35 chỗ như sau:</div> <br> <div data-redactor="1">- Dòng xe 35 chỗ Isuzu Samco</div> <br> <div data-redactor="1">- Dòng xe 35 chỗ Thaco Town</div> <br> <div data-redactor="1"><img src="https://lh3.googleusercontent.com/-Qbi8Q4-NCME/XGuvaoeP5mI/AAAAAAAAFRs/YA..." alt="[IMG]" /></div> <div data-redactor="1">Ngọc Minh cho thuê xe 35 chỗ đi Móng Cái</div> <br> <div data-redactor="1"><i>Giá các dòng xe 35 chỗ cho thuê tham quan Cửa khẩu Móng Cái</i></div> <br> <div data-redactor="1">Đa số khách hàng đều cho rằng, xe đời mới thì mức giá cho thuê chắc cũng sẽ rất đắt. Nhưng nếu quý khách sử dụng dịch vụ thuê xe tại Ngọc Minh, chúng tôi cam kết sẽ mang tới mức giá hợp lý so với thị trường chung. Hiện tại giá của dòng xe 35 chỗ của công ty là 11.000đ/km.</div> <br> <div data-redactor="1">Tham khảo thêm: <b><i><a href="http://thuexeotongocminh.com/thue-xe-du-lich/thue-xe-45-cho/">Cho thuê xe 45 chỗ giá rẻ tại Hà Nội</a></i></b></div> <br> <div data-redactor="1"><b>Vài nét về Cửa khẩu Móng Cái – Quảng Ninh</b></div> <br> <div data-redactor="1">Cửa khẩu Móng Cái là một trong những cửa khẩu đầu tiên của Việt Nam. Nằm tại phường Hòa Lạc, thành phố Móng Cái, tỉnh Quảng Ninh, cửa khẩu này là nơi thông thương với cửa khẩu Đông Hưng, tỉnh Quảng Tây, Trung Quốc.</div> <br> <div data-redactor="1">Đây là một trong những điểm tham quan rất được ưa chuộng đối với du khách. Ghé thăm cửa khẩu Móng Cái, du khách chỉ cần đăng ký với bên biên phòng là có thể vào khu vực cửa khẩu để chụp ảnh cùng mốc 1369 cũng như vạch biên giới nằm trên cầu Hữu Nghị Bắc Luân.</div> <br> <div data-redactor="1">Ngoài ra, nếu muốn khám phá thành phố Đông Hưng, Trung Quốc, du khách hãy chuẩn bị sẵn 2 ảnh 4x6, CMND và giấy khai sinh nếu có trẻ em dưới 15 tuổi để làm sổ thông hành. Thủ tục khá nhanh gọn chỉ mất khoảng 1 tiếng đồng hồ là bạn có thể xuất cảnh qua cửa khẩu rồi.</div> <br> <div data-redactor="1">Và nếu đã đặt chân tới Móng Cái thì đừng quên ghé qua chợ Móng Cái để có thể mua được những món đồ vừa ý về làm quà cho gia đình và bạn bè nhé!</div> <br> <div data-redactor="1">Còn chần chừ gì nữa mà không liên hệ ngay với <a href="https://www.facebook.com/chothuexedulichngocminh/"><b><i>Cho thuê xe 35 chỗ Hà Nội</i></b> </a>để có một chuyến đi hoàn hảo, đảm bảo an toàn và chất lượng tuyệt đối? Hãy gọi vào hotline <b><i><span style="color: #ff0000;" data-redactor="1">0983.22.9996 – 0967.27.9998</span></i></b> để được tư vấn cụ thể về lịch trình cũng như cách thức thuê xe.</div> <br> <div data-redactor="1">Sự tin tưởng của quý khách là niềm vinh dự của Ngọc Minh!</div>

6 years, 2 months

1
0
0 / 0

Cho thue xe 35 cho di cua khau Mong Cai - Quang Ninh

by anddyn810＠gmail.com

<div data-redactor="1">Vào những dịp nghỉ lễ hay đơn giản là dịp cuối tuần, nếu quý khách chưa tìm được một địa điểm nào thú vị để du lịch cùng gia đình và bạn bè thì tại sao không thử một lần khám phá những cửa khẩu quốc tế - nơi cửa ngõ quốc gia để trải nghiệm những cảm giác thú vị? Ngọc Minh đưa ra dịch vụ <b><i><a href="http://thuexeotongocminh.com/dia-chi-cho-thue-xe-35-cho-gia-re-uy-tin-tai...">Cho thuê xe 35 chỗ</a></i></b> đi cửa khẩu Móng Cái – Quảng Ninh nhằm phục vụ nhu cầu đó của khách hàng.</div> <br> <div data-redactor="1"><b><span style="color: #ff0000;" data-redactor="1">Liên hệ cho thuê xe 35 chỗ tham quan Cửa khẩu Móng Cái: 0983.22.9996 – 0967.27.9998</span></b></div> <br> <div data-redactor="1"><b>Ngọc Minh cho thuê xe 35 chỗ tham quan Cửa khẩu Móng Cái</b></div> <br> <div data-redactor="1"><i>Thông tin về lịch trình cho thuê xe 7 chỗ tham quan Cửa khẩu Móng Cái</i></div> <br> <div data-redactor="1">- Lịch trình: Đón tại Hà Nội – Cửa khẩu Móng Cái – Trả về Hà Nội</div> <br> <div data-redactor="1">- Số km dự kiến: 314km/ chiều</div> <br> <div data-redactor="1">- Cung đường đi: Qua QL5B – QL18</div> <br> <div data-redactor="1">- Thời gian di chuyển: 5 giờ 22 phút</div> <br> <div data-redactor="1"><i>Dòng xe cho thuê xe 35 chỗ tham quan Cửa khẩu Móng Cái</i></div> <br> <div data-redactor="1">Với nhiều năm hoạt động trong lĩnh vực du lịch vận tải, Ngọc Minh luôn gây được lòng tin với khách hàng bởi sự đảm bảo chất lượng xe và độ an toàn trong các chuyến đi. Quý khách hoàn toàn có thể lựa chọn dòng xe 35 chỗ tại công ty chúng tôi cho chuyến đi gia đình hay nhóm bạn của mình. Bởi dòng xe 35 chỗ tại Ngọc Minh đều là xe đời mới, nội thất đầy đủ, sang trọng, mang lại cảm giác thoải mái nhất cho khách hàng. Hiện tại chúng tôi đang có các loại xe 35 chỗ như sau:</div> <br> <div data-redactor="1">- Dòng xe 35 chỗ Isuzu Samco</div> <br> <div data-redactor="1">- Dòng xe 35 chỗ Thaco Town</div> <br> <div data-redactor="1"><img src="https://lh3.googleusercontent.com/-Qbi8Q4-NCME/XGuvaoeP5mI/AAAAAAAAFRs/YA..." alt="[IMG]" /></div> <div data-redactor="1">Ngọc Minh cho thuê xe 35 chỗ đi Móng Cái</div> <br> <div data-redactor="1"><i>Giá các dòng xe 35 chỗ cho thuê tham quan Cửa khẩu Móng Cái</i></div> <br> <div data-redactor="1">Đa số khách hàng đều cho rằng, xe đời mới thì mức giá cho thuê chắc cũng sẽ rất đắt. Nhưng nếu quý khách sử dụng dịch vụ thuê xe tại Ngọc Minh, chúng tôi cam kết sẽ mang tới mức giá hợp lý so với thị trường chung. Hiện tại giá của dòng xe 35 chỗ của công ty là 11.000đ/km.</div> <br> <div data-redactor="1">Tham khảo thêm: <b><i><a href="http://thuexeotongocminh.com/thue-xe-du-lich/thue-xe-45-cho/">Cho thuê xe 45 chỗ giá rẻ tại Hà Nội</a></i></b></div> <br> <div data-redactor="1"><b>Vài nét về Cửa khẩu Móng Cái – Quảng Ninh</b></div> <br> <div data-redactor="1">Cửa khẩu Móng Cái là một trong những cửa khẩu đầu tiên của Việt Nam. Nằm tại phường Hòa Lạc, thành phố Móng Cái, tỉnh Quảng Ninh, cửa khẩu này là nơi thông thương với cửa khẩu Đông Hưng, tỉnh Quảng Tây, Trung Quốc.</div> <br> <div data-redactor="1">Đây là một trong những điểm tham quan rất được ưa chuộng đối với du khách. Ghé thăm cửa khẩu Móng Cái, du khách chỉ cần đăng ký với bên biên phòng là có thể vào khu vực cửa khẩu để chụp ảnh cùng mốc 1369 cũng như vạch biên giới nằm trên cầu Hữu Nghị Bắc Luân.</div> <br> <div data-redactor="1">Ngoài ra, nếu muốn khám phá thành phố Đông Hưng, Trung Quốc, du khách hãy chuẩn bị sẵn 2 ảnh 4x6, CMND và giấy khai sinh nếu có trẻ em dưới 15 tuổi để làm sổ thông hành. Thủ tục khá nhanh gọn chỉ mất khoảng 1 tiếng đồng hồ là bạn có thể xuất cảnh qua cửa khẩu rồi.</div> <br> <div data-redactor="1">Và nếu đã đặt chân tới Móng Cái thì đừng quên ghé qua chợ Móng Cái để có thể mua được những món đồ vừa ý về làm quà cho gia đình và bạn bè nhé!</div> <br> <div data-redactor="1">Còn chần chừ gì nữa mà không liên hệ ngay với <a href="https://www.facebook.com/chothuexedulichngocminh/"><b><i>Cho thuê xe 35 chỗ Hà Nội</i></b> </a>để có một chuyến đi hoàn hảo, đảm bảo an toàn và chất lượng tuyệt đối? Hãy gọi vào hotline <b><i><span style="color: #ff0000;" data-redactor="1">0983.22.9996 – 0967.27.9998</span></i></b> để được tư vấn cụ thể về lịch trình cũng như cách thức thuê xe.</div> <br> <div data-redactor="1">Sự tin tưởng của quý khách là niềm vinh dự của Ngọc Minh!</div>

6 years, 2 months

1
0
0 / 0

Status of Snaphots and LVCache for VDO volumes in oVirt 4.3.x

by Guillaume Pavese

Hi, Currently choosing VDO at volume setup forces creation of a thick LV due to a RHEL bug, cf : https://bugzilla.redhat.com/show_bug.cgi?id=1634551 https://bugzilla.redhat.com/show_bug.cgi?id=1600156 The latter was closed while pointing to the following workaround : https://access.redhat.com/solutions/3562021 It is also said there that full fix will be available in RHEL-8 Thin LV are necessary to enable volume snapshots and LVCache, and are currently not possible on VDO volumes Does the above comments in BZs mean that it will still not be possible to configure Thin LV for VDO volumes with ovirt-4.3.x/Centos-7.X either? We have been postponing rolling out oVirt-4.2 in production because of these two major cons. Please advise if you think RHEL-8 will be necessary in order to have VDO volumes on par with normal volumes (snapshots and LVCache). In that case we will deploy production asap without VDO. Should we instead force the creation of VDO volmume on ThinLV by tweaking the gdeploy configuration and applying the mentionned workaround? Thanks Guillaume Pavese Ingénieur Système et Réseau Interactiv-Group

6 years, 2 months

1
0
0 / 0

Status of Snaphots and LVCache for VDO volume in oVirt 4.3

by Guillaume Pavese

Hi, Currently choosing VDO at volume setup forces creation of a thick LV due to a RHEL bug, cf : https://bugzilla.redhat.com/show_bug.cgi?id=1634551 https://bugzilla.redhat.com/show_bug.cgi?id=1600156 The latter was closed while pointing to the following workaround : https://access.redhat.com/solutions/3562021 It is also said there that full fix will be available in RHEL-8 Thin LV are necessary to enable volume snapshots and LVCache, and are currently not possible on VDO volumes Does the above comments in BZs mean that it will still not be possible to configure Thin LV for VDO volumes with ovirt-4.3.x/Centos-7.X either? We have been postponing rolling out oVirt-4.2 in production because of these two major cons. Please advise if you think RHEL-8 will be necessary in order to have VDO volumes on par with normal volumes (snapshots and LVCache). In that case we will deploy production asap without VDO. Should we instead force the creation of VDO volmume on ThinLV by tweaking the gdeploy configuration and applying the mentionned workaround? Thanks Guillaume Pavese Ingénieur Système et Réseau Interactiv-Group

6 years, 2 months

1
0
0 / 0

Re: Creating a static route

by Lev Veyde

Hi Doug, Sure, np. >> 1. - yes it is the priority setting of the specific rule. Basically you put in the file the post "ip rule add" part of the command e.g. for "ip rule add to 172.22.20.31 priority 32764" you need to put a line of "to 172.22.20.31 priority 32764" >> 2. - yes, the same priority can be used for all of them. E.g. if you want to route 172.22.20.31, 172.22.34.56 and 172.22.67.89 you will need to add: to 172.22.20.31 priority 32764 to 172.22.34.56 priority 32764 to 172.22.67.89 priority 32764 into the rule-<interface name> file e.g. rule-ovirtmgmt or rule-eno3. Please note that you will also need to add the static route for each one of these as well w/ "ip route add ... " command e.g. "ip route add 172.22.20.31 via 172.21.12.61". You can also use the route-<interface name> putting just the route info part, similar to the "ip rule" e.g. for equivalent of "ip route add 172.22.20.31 via 172.21.12.61" you need put in the file a line with the content "172.22.20.31 via 172.21.12.61". For routes it's important to use specifically the route-ovirtmgmt file since the script automatically adds the device to the route command i.e. you can put the following lines into your route-ovirtmgmt file: 172.22.20.31 via 172.21.12.61 172.22.34.56 via 172.21.12.61 172.22.67.89 via 172.21.12.68 (In case the first 2 of the mentioned IPs should be routed through the 172.21.12.61 gateway, and the last one should be routed through the 172.21.12.68 gateway). For the reference you can take a look at the /etc/sysconfig/network-scripts/ifup-routes script. It does the actual processing of both "route" and "rule" files for all network interfaces on a system. Please feel free to contact if you have further questions. Thanks in advance, On Thu, Feb 14, 2019 at 3:39 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> wrote: > Lev, > > Thanks for the response. I was just getting ready to contact you about > this. I do have 2 follow-up questions, if you don’t mind. > > > > 1. When we were talking about creating the route that would be enabled > again after a reboot, you said to modify “the > /etc/sysconfig/network-scripts/rule-<interface name> e.g. rule-ovirtmgmt or > rule-eno3 (just put in the file "to 172.22.20.31 priority 32764”. Is > priority 32764 for the ip rule command? > 2. If I have multiple IPs that I would need to create a static route, > would the priority be 32764 for all of them? > > > > Once again, thank you for all of your help with this!! > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Thursday, February 14, 2019 3:19 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > Sorry that it took a bit of time to get back to you. > Managed to catch today somebody from the oVirt/RHV network team to discuss > the issue. > > It seems that we don't currently support custom static routes on the > hosts, so the workaround that I suggested is the way to do it. > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 11:12 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Will do. Thanks again for all your help!! Looking forward to a > confirmation of the fix or a different solution. Either way, I know I have > a working fix. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 3:09 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > Just a small note - the commands in the rc.local should be placed *before* > the very last line (the touch ... command). > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 10:56 PM Lev Veyde <lveyde(a)redhat.com> wrote: > > Hi Doug, > > Thanks, you're welcome! > > It's generally possible to add persistent rules by either using the legacy > /etc/rc.d/rc.local boot script (chmod +x /etc/rc.d/rc.local and put the > relevant commands at the end of the file, that way you can actually run any > commands) or by using the /etc/sysconfig/network-scripts/rule-<interface > name> e.g. rule-ovirtmgmt or rule-eno3 (just put in the file "to > 172.22.20.31 priority 32764" - without quotes), however of course this > needs to be tested to verify that it works. > > I forwarded the issue to the network team and hopefully they will update > soon. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 10:17 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > You have no idea how helpful you have been!!!!!! I’ve been having this > issue for over 2 months and starting to cause major problems. > > > > Please let me know if you find a better solution. I’m going to wait to > hear back from you before implementing. > > > > If we go with this workaround, is there a way to add the ip rule so it’s > persistent? I know how to make the ip route add persistent. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 2:14 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > Yes, it looks like it did. > > I'll try to catch somebody from my local oVirt/RHV networking team to take > a look at this issue, maybe there is a better solution for that issue than > my workaround. > > > > But meanwhile you can use this workaround (ip route add + ip rule add), > just please be aware that these should be run after each host reboot, since > these commands are not persistent. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 10:07 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Here’s the results. It appears to fix the issue!! > > > > From non-working system: > > > > -bash-4.2# ip rule add to 172.22.20.31 priority 32764 > > > > -bash-4.2# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 CenteraAmesAN1.emcins.com (172.21.12.61) 0.487 ms 1.082 ms 1.313 ms > > 2 192.168.90.9 (192.168.90.9) 1.507 ms 2.090 ms 2.294 ms > > 3 pdputopcomm01.emcins.com (172.22.20.31) 1.403 ms 1.401 ms 1.348 ms > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 2:01 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > OK, I think that I have a guess of what may have happened here... > > Can you please run the following command on the (non-working) host: > > ip rule add to 172.22.20.31 priority 32764 > > > > This needs to be run in addition to the ip route add ... command. > > > > And then please run the traceroute command and let me know if that fixed > the issue. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 9:30 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Here you go. > > > > From non-working system > > > > -bash-4.2# ip rule > > 0: from all lookup local > > 32764: from all to 172.21.0.0/16 iif ovirtmgmt lookup 2887058719 > > 32765: from 172.21.0.0/16 lookup 2887058719 > > 32766: from all lookup main > > 32767: from all lookup default > > > > > > From working system > > > > [root@paputopcomm04 ~]# ip rule > > 0: from all lookup local > > 32766: from all lookup main > > 32767: from all lookup default > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 12:35 PM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > That shouldn't really matter, since ovirtmgmt is just a bridged interface, > and unless I'm missing something it shouldn't really affect routing. > > Can you please also provide the output of "ip rule" from both working and > non-working hosts ? > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 8:01 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Here’s the ip route from the server that worked and didn’t work > > > > IP Route from server that worked > > > > [root@paputopcomm04 ~]# ip route > > default via 172.21.0.250 dev eno3 > > 169.254.0.0/16 dev eno3 scope link metric 1002 > > 169.254.0.0/16 dev eno4 scope link metric 1005 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18 > > 172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34 > > *172.22.20.31 via 172.21.12.61 dev eno3* > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34 > > > > > > > > IP Route from server that didn't work > > > > -bash-4.2# ip route > > default via 172.21.0.250 dev ovirtmgmt > > 169.254.0.0/16 dev eno4 scope link metric 1004 > > 169.254.0.0/16 dev ovirtmgmt scope link metric 1021 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.15 > > 172.21.0.0/16 dev ovirtmgmt proto kernel scope link src 172.21.5.31 > > *172.22.20.31 via 172.21.12.61 dev ovirtmgmt* > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.31 > > > > We have had our network team look and they don’t know. As I said, the was > setup by Commvault. It’s almost like the ovirtmgmt interface will not > allow a route add due to the way it’s configured? They, Commvault, are > trying different things within their software to get this working, but it’s > causing us more problems. I figured I would take a shot and see if > someone, who works with the oVirt software, would have any ideas. > > > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 11:51 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > This is indeed quite weird... > > It looks like the OS for some reason disregards the static route that you > have added. > > BTW, have you verified that it's indeed was added by running "ip route" > following the "ip route add ..." command ? > > Maybe somebody from the network team has an idea of what may be the cause > of this issue... > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 7:36 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > I’m showing you the same outputs (ip a, ip route, traceroute, ip route > add, and traceroute) from another server in this group that doesn’t use the > ovirtmgmt for it’s default interface. > > > > [root@paputopcomm04 ~]# ip a > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > inet 127.0.0.1/8 scope host lo > > valid_lft forever preferred_lft forever > > inet6 ::1/128 scope host > > valid_lft forever preferred_lft forever > > 2: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:db:bc:c0 brd ff:ff:ff:ff:ff:ff > > inet 172.21.5.34/16 brd 172.21.255.255 scope global eno3 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fedb:bcc0/64 scope link > > valid_lft forever preferred_lft forever > > 3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:e8:da:03 brd ff:ff:ff:ff:ff:ff > > inet 172.26.5.34/16 brd 172.26.255.255 scope global eno1 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fee8:da03/64 scope link > > valid_lft forever preferred_lft forever > > 4: eno2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN > qlen 1000 > > link/ether 90:1b:0e:e8:da:04 brd ff:ff:ff:ff:ff:ff > > 5: eno4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > > link/ether 90:1b:0e:db:bc:c1 brd ff:ff:ff:ff:ff:ff > > inet 172.17.53.18/16 brd 172.17.255.255 scope global eno4 > > valid_lft forever preferred_lft forever > > inet6 fe80::921b:eff:fedb:bcc1/64 scope link > > valid_lft forever preferred_lft forever > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# ip route > > default via 172.21.0.250 dev eno3 > > 169.254.0.0/16 dev eno3 scope link metric 1002 > > 169.254.0.0/16 dev eno4 scope link metric 1005 > > 172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18 > > 172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34 > > 172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34 > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 ames-acc1-agg-1.emcins.com (172.21.0.246) 1.081 ms 1.816 ms 1.832 ms > > 2 192.168.200.30 (192.168.200.30) 0.639 ms 192.168.200.14 > (192.168.200.14) 1.063 ms 1.577 ms > > 3 192.168.200.101 (192.168.200.101) 3.110 ms ames-sw-wanrtr.emcins.com > (192.168.200.97) 3.191 ms 3.277 ms > > 4 192.168.100.26 (192.168.100.26) 4.146 ms 4.273 ms 4.394 ms > > 5 192.168.100.98 (192.168.100.98) 1.893 ms 2.364 ms 2.397 ms > > 6 192.168.100.50 (192.168.100.50) 5.707 ms 192.168.100.33 > (192.168.100.33) 5.134 ms 192.168.100.50 (192.168.100.50) 4.105 ms > > 7 pdputopcomm01.emcins.com (172.22.20.31) 1.359 ms 1.374 ms 1.351 ms > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# ip route add 172.22.20.31 via 172.21.12.61 > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# > > [root@paputopcomm04 ~]# traceroute 172.22.20.31 > > traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets > > 1 CenteraAmesAN1.emcins.com (172.21.12.61) 6.184 ms 6.475 ms 6.686 ms > > 2 192.168.90.9 (192.168.90.9) 1.770 ms 1.979 ms 2.189 ms > > 3 pdputopcomm01.emcins.com (172.22.20.31) 1.405 ms * 1.354 ms > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 11:07 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > In most cases it should not be required, especially as my guess (again it > would be easier if you could post the output of the "ip a" and "ip route") > is that the eno1 is part of the ovirtmgmt bridge. > > What is the output of the "traceroute 172.22.20.31" that you get on the > host after you have added the static route? > > Thanks in advance, > > > > > > On Tue, Feb 12, 2019 at 6:58 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > One other question, since there are multiple enabled interfaces (ovirtmgmt > and eno1), do I need to specify an interface for the route add. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:50 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What do you mean by "static route is refused"? > > What is the error message(s) you see? > > > > Can you please try to add the route with the following command: > > ip route add 172.22.20.31 via 172.21.12.61 > > > > If that doesn't work, then please provide more details, i.e. what is the > exact error message(s) you see, the version of your OS and oVirt, output of > "ip a" and "ip route" on your host(s), so that it will be easier to help > you. > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 6:43 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com> > wrote: > > Lev, > > Thanks for your response. > > > > If I attempt to manually add the route using route add: > > > > route add -net 172.22.20.31 netmask 255.255.255.255 gw 172.21.12.61 dev > ovirtmgmt > > > > This static route is refused and all traffic is routed over the default > gateway. > > > > But if I use a server that doesn’t use the ovirtmgmt interface and set the > same static route, the required data is routed correctly over that static > route. > > > > [image: Count On EMC] <http://www.emcins.com/> > > *Doug Maxfield *| Senior Operating Systems Analyst > > *EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265 > Tel: 515.345.4507 | Fax: 866.331.1522 > Doug.L.Maxfield(a)EMCIns.com | www.emcins.com > > > > > > *From:* Lev Veyde <lveyde(a)redhat.com> > *Sent:* Tuesday, February 12, 2019 10:34 AM > *To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com> > *Cc:* users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Creating a static route > > > > Hi Doug, > > What is the exact problem you are having while attempting to add a static > route on the hosts? > > > > Thanks in advance, > > > > On Tue, Feb 12, 2019 at 5:23 PM <doug.l.maxfield(a)emcins.com> wrote: > > Good Morning, > New to oVirt. We are using this with a backup solution from Commvault. > The issue that we are having is that we need to setup a static route for > specific data between 2 remote sites. The ovirtmgmt is configured with the > correct IP and gateway for the server. We need to route data over a > different gateway so that we don't "max out" the default network connection > between the 2 sites. Example below > > Ovirtmgmt IP - 172.21.5.31 > Gateway IP - 172.21.0.250 > > We need any traffic with a destination of 172.22.20.31(Remote site) to > route over this gateway, 172.21.12.61 > > There are multiple servers in this configuration. Servers that are not > using the ovirtmgmt interface for their default, we are able to route the > data. The only problem is with attempting to setup a different static > route on the ovirtmgmt interfaces. > > Thanks in advance for any help!!! > > Doug > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGXSLHAP3X5... > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > NOTICE: This message (including any attachments) is intended for a > specific individual and may contain information that is either confidential > or legally protected. If you believe that it has been sent to you in > error, please reply to the sender that you have received the message in > error, then delete it. If you are not the intended recipient, you are > hereby notified that any retention, dissemination, distribution, or copying > of this communication is strictly prohibited. Thank you. EMC071856 > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > > > > -- > > > > *Lev Veyde* > > Software Engineer, RHCE | RHCVA | MCITP > > Red Hat Israel > > <https://www.redhat.com> > > lev(a)redhat.com | lveyde(a)redhat.com > > <https://red.ht/sig> > > *TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted> > -- Lev Veyde Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

6 years, 2 months

2
2
0 / 0

Re: After import storage many of my vm's disks not appear

by Eyal Edri

On Mon, Feb 18, 2019 at 5:41 PM Kalil de A. Carvalho <kalilac(a)gmail.com> wrote: > Hello all. > It is been a while that I used the oVirt and on the same time, the company > where I started to work, has a big problem with the engine, we lose it. We > did not have any backup. > To try recovery the enverioment I installed a knew oVirt, this time Hosted > Engine, and import the Storage. I could import and start some vm's but the > most part not appear for me, dosen't show on "Disk Import", "VM Import" and > any place. > I know that is there, because show me that size. > May I see, like list, this disks? I can't do this throught oVirt web. > Is there any way to bring dist disks back? > I already search this tasks but with no luck. > > oVirt ver: 4.2.8.2-1.el7 > > Any one can help, please? > Best regards. > > -- > Atenciosamente, > Kalil de A. Carvalho > > _______________________________________________ > Infra mailing list -- infra(a)ovirt.org > To unsubscribe send an email to infra-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/infra@ovirt.org/message/64GREELIVLI... > -- Eyal edri MANAGER RHV/CNV DevOps EMEA VIRTUALIZATION R&D Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted> phone: +972-9-7692018 irc: eedri (on #tlv #rhev-dev #rhev-integ)

6 years, 2 months

1
0
0 / 0

After import storage many of my vm's disks not appear

by Kalil de A. Carvalho

Hello all. It is been a while that I used the oVirt and on the same time, the company where I started to work, has a big problem with the engine, we lose it. We did not have any backup. To try recovery the enverioment I installed a knew oVirt, this time Hosted Engine, and import the Storage. I could import and start some vm's but the most part not appear for me, dosen't show on "Disk Import", "VM Import" and any place. I know that is there, because show me that size. May I see, like list, this disks? I can't do this throught oVirt web. Is there any way to bring dist disks back? I already search this tasks but with no luck. oVirt ver: 4.2.8.2-1.el7 Any one can help, please? Best regards. -- Atenciosamente, Kalil de A. Carvalho

6 years, 2 months

1
0
0 / 0

SURVEY: your NFS configuration (Bug 1666795 - SHE doesn't start after power-off, 4.1 to 4.3 upgrade - VolumeDoesNotExist: Volume does not exist )

by Nir Soffer

Looking at https://bugzilla.redhat.com/1666795 It seems that a change in vdsm/libvirt exposed NFS configuration issue, that may was needed in the past and probably not needed now. If you use NFS, I would like to see your /etc/exports (after sanitizing it if needed). For extra bonus, output of "exportfs -v" would be useful. In particular, I want to know if you use root_squash, all_squash, or no_root_squash. Thanks, Nir

6 years, 2 months

6
5
0 / 0

How to set hot plugged memory online_movable

by zodaoko＠gmail.com

Hi, I'd like to try the memory hot unplug, refer to: https://www.ovirt.org/documentation/vmm-guide/chap-Editing_Virtual_Machin...: "All blocks of the hot-plugged memory must be set to **online_movable** in the virtual machine’s device management rules. In virtual machines running up-to-date versions of Enterprise Linux or CoreOS, this rule is set by default." I created a VM running CentOS7.6: # more /etc/redhat-release CentOS Linux release 7.6.1810 (Core) # more /usr/lib/udev/rules.d/40-redhat.rules ... # Memory hotadd request SUBSYSTEM!="memory", ACTION!="add", GOTO="memory_hotplug_end" PROGRAM="/bin/uname -p", RESULT=="s390*", GOTO="memory_hotplug_end" ENV{.state}="online" PROGRAM="/bin/systemd-detect-virt", RESULT=="none", ENV{.state}="online_movable" ATTR{state}=="offline", ATTR{state}="$env{.state}" LABEL="memory_hotplug_end" It looks like the online_movable will be set only when systemd-detect-virt returns none, i.e. hot plugging memory for a bare-metal machine, so how to make the hot plugged memory "online_movable" in the virtual machines? Thank you. Regards, -Zhen

6 years, 2 months

2
1
0 / 0

changes in oVirt 4.3 and vGPU?

by Hetz Ben Hamo

Hi, I just installed a Tesla T4 card, installed the nvidia's RPM, I see the mdev_type stuff etc. Following their instructions, I'm trying to set a Windows 10 VM to use the vGPU (the VM works without any vGPU), I get this error in the event... VM Win-10-test is down with error. Exit message: internal error: qemu unexpectedly closed the monitor: 2019-02-08T14:01:11.287955Z qemu-kvm: warning: All CPU(s) up to maxcpus should be described in NUMA config, ability to start up with partial NUMA mappings is obsoleted and will be removed in future 2019-02-08T14:01:11.313878Z qemu-kvm: -device vfio-pci,id=hostdev0,sysfsdev=/sys/bus/mdev/devices/486b48a3-01c7-4a67-9727-279813bae0e8,display=off,bus=pci.0,addr=0x8: vfio error: 486b48a3-01c7-4a67-9727-279813bae0e8: error getting device from group 0: Input/output error Verify all devices in group 0 are bound to vfio-<bus> or pci-stub and not already in use. Could someone explain to me what am I missing and what to do? I don't see any docs about it. Thanks

6 years, 2 months

4
4
0 / 0

Migration of VMs across two Ovirt setups

by ddc.comp＠gmail.com

Hi, I have two ovirt setups having multiple hosts and cluster and around 100+ vms in one and around 32 in one setup. I want to dismantle one setup and before before doing so all vms are need to be migrated to one setup I tried with import vms from another setup using Libvert -- https://ovirt.org/develop/release-management/features/virt/KvmToOvirt.html but no luck connection not getting established. What if I simply remove one host from one setup having local storage(all vms are located on local storage) and simply add it to another setup? and then migrate VMs from local to shared storage and then dismantle host ! Regards Dipak Chaudhari

6 years, 2 months

2
1
0 / 0

AMD EPYC 4.3 upgrade 'CPU type is not supported in this cluster compatibility version or is not supported at all'

by Ryan Bullock

We just updated our engine to 4.3, but when I tried to update one of our AMD EPYC hosts it could not activate with the error: Host vmc2h2 moved to Non-Operational state as host CPU type is not supported in this cluster compatibility version or is not supported at all. Relevant (I think) parts from the the engine log: (EE-ManagedThreadFactory-engineScheduled-Thread-82) [ee51a70] Could not find server cpu for server 'vmc2h2' (745a14c6-9d31-48a4-9566-914647d83f53), flags: 'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,constant_tsc,art,rep_good,nopl,nonstop_tsc,extd_apicid,amd_dcm,aperfmperf,eagerfpu,pni,pclmulqdq,monitor,ssse3,fma,cx16,sse4_1,sse4_2,movbe,popcnt,aes,xsave,avx,f16c,rdrand,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,skinit,wdt,tce,topoext,perfctr_core,perfctr_nb,bpext,perfctr_l2,cpb,hw_pstate,sme,retpoline_amd,ssbd,ibpb,vmmcall,fsgsbase,bmi1,avx2,smep,bmi2,rdseed,adx,smap,clflushopt,sha_ni,xsaveopt,xsavec,xgetbv1,clzero,irperf,xsaveerptr,arat,npt,lbrv,svm_lock,nrip_save,tsc_scale,vmcb_clean,flushbyasid,decodeassists,pausefilter,pfthreshold,avic,v_vmsave_vmload,vgif,overflow_recov,succor,smca' 2019-02-06 17:23:58,527-08 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-82) [7f6d4f0d] START, SetVdsStatusVDSCommand(HostName = vmc2h2, SetVdsStatusVDSCommandParameters:{hostId='745a14c6-9d31-48a4-9566-914647d83f53', status='NonOperational', nonOperationalReason='CPU_TYPE_INCOMPATIBLE_WITH_CLUSTER' From virsh -r capabilities: <cpu> <arch>x86_64</arch> <model>EPYC-IBPB</model> <vendor>AMD</vendor> <microcode version='134222375'/> <topology sockets='1' cores='32' threads='2'/> <feature name='ht'/> <feature name='osxsave'/> <feature name='xsaves'/> <feature name='cmp_legacy'/> <feature name='extapic'/> <feature name='skinit'/> <feature name='wdt'/> <feature name='tce'/> <feature name='topoext'/> <feature name='perfctr_core'/> <feature name='perfctr_nb'/> <feature name='invtsc'/> <pages unit='KiB' size='4'/> <pages unit='KiB' size='2048'/> <pages unit='KiB' size='1048576'/> </cpu> I also tried creating a new 4.3 cluster, set to the AMD EPYC IPBDB SSBD and moving the host into it, but it failed to move it into that cluster with a similar error about an unsupported CPU (for some reason it also made me clear the additional kernel options as well, we use 1gb hugepages). I have not yet tried removing the host entirely and adding it as part of creating the new cluster. We have been/are using a database change to update the 4.2 cluster level to include EPYC support with the following entries (can post the whole query if needed): 7:AMD EPYC:svm,nx,model_EPYC:EPYC:x86_64; 8:AMD EPYC IBPB:svm,nx,ibpb,model_EPYC:EPYC-IBPB:x86_64 We have been running 4.2 with this for awhile. We did apply the same changes after the 4.3 update, but only for the 4.2 cluster level. We only used the AMD EPYC IBPB model. Reverting the host back to 4.2 allows it to activate and run normally. Anyone have any ideas as to why it can't seem to find the cpu type? Thanks, Ryan Bullock

6 years, 2 months

5
16
0 / 0

Re: Best Practice to Deploy HostedEngine oVirt Environment

by Eyal Edri

adding users list, infra is for infrastructure and CI. On Mon, Feb 18, 2019, 05:40 Mohd Hanief Harun <hanief(a)abyres.net wrote: > Hi all, > > Im new in rhv and oVirt, hope there some space for the noob question :) > > Let say I have 2 hypervisors and 1 storage server. Where is the best > practice to install self-hosted engine? In hypervisors or storage? I have > experienced installing self-hosted engine in 2 storages. If something > happened to the storage 1, ovirt-engine (ovirt-manager) will automatically > migrate to storage 2. > > But this time is difference. We only have 1 storage. my concern is, if > something happened to the storage, I cannot access my ovirt-manager. I'm > thinking to deploy self-hosted engine in hypervisors since we have 2 > hypervisors. any advise? what is the best practice? If you have any > tutorial installing hosted engine in 2 hypervisors would be very appreciate. > > thanks. > _______________________________________________ > Infra mailing list -- infra(a)ovirt.org > To unsubscribe send an email to infra-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/infra@ovirt.org/message/JRYHBXIWMCO... >

6 years, 2 months

1
0
0 / 0

new easy way to open issues for ovirt.org and documentation

by Greg Sheremeta

Hi, I created some footer links on ovirt.org to make it super easy to open GitHub issues. We often get questions about where to report documentation issues and things like that -- hopefully this eases the pain. When you are visiting any page on ovirt.org and you see a problem or have an idea for enhancement, simply scroll down and click 'Report an issue on GitHub'. [image: Selection_393.png] Full demo (2 minutes): https://www.youtube.com/watch?v=TbORKknLVL4 (and, of course, if you're so inclined, the Edit link starts a PR for you ...) Best wishes, Greg -- GREG SHEREMETA SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX Red Hat NA <https://www.redhat.com/> gshereme(a)redhat.com IRC: gshereme <https://red.ht/sig>

6 years, 2 months

2
2
0 / 0

Huge Pages

by Vincent Royer

How do I know how many huge pages my hosts can support? cat /proc/meminfo | grep Huge AnonHugePages: 17684480 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB [image: image.png] And once I know, I set the kernel parameters here, and reboot the host, correct? [image: image.png] And then I assume I assign them to the VM here? How do I decide how many huge pages and what size a particular VM can benefit from? [image: image.png] Is there a part of the docs I am not finding that covers this?

6 years, 2 months

3
4
0 / 0

Re: Ovirt Cluster completely unstable

by Leo David

Just thinking.... Maybe different options where configured to the volumes during update, that could make them unstable ? ie: sharding or something else On Sat, Feb 16, 2019, 13:26 Darryl Scott <dscott(a)umbctraining.com wrote: > Sandro > > > I don't have ovirt-log-collector on my ovirt engine. How can obtain? I > see a github repo to make file, I do not want to be making files on my > ovirt-engine, just not yet, I could possible on weekend. > > > Where can I obtain the ovirt-log-collector? > > > > ------------------------------ > *From:* Sandro Bonazzola <sbonazzo(a)redhat.com> > *Sent:* Thursday, February 14, 2019 9:16:05 AM > *To:* Jayme > *Cc:* Darryl Scott; users > *Subject:* Re: [ovirt-users] Re: Ovirt Cluster completely unstable > > > > Il giorno gio 14 feb 2019 alle ore 07:54 Jayme <jaymef(a)gmail.com> ha > scritto: > > I have a three node HCI gluster which was previously running 4.2 with zero > problems. I just upgraded it yesterday. I ran in to a few bugs right away > with the upgrade process, but aside from that I also discovered other users > with severe GlusterFS problems since the upgrade to new GlusterFS version. > It is less than 24 hours since I upgrade my cluster and I just got a notice > that one of my GlusterFS bricks is offline. There does appear to be a very > real and serious issue here with the latest updates. > > > tracking the issue on Gluster side on this bug: > https://bugzilla.redhat.com/show_bug.cgi?id=1677160 > If you can help Gluster community providing requested logs it would be > great. > > > > > > > On Wed, Feb 13, 2019 at 7:26 PM <dscott(a)umbctraining.com> wrote: > > I'm abandoning my production ovirt cluster due to instability. I have a > 7 host cluster running about 300 vms and have been for over a year. It has > become unstable over the past three days. I have random hosts both, > compute and storage disconnecting. AND many vms disconnecting and becoming > unusable. > > 7 host are 4 compute hosts running Ovirt 4.2.8 and three glusterfs hosts > running 3.12.5. I submitted a bugzilla bug and they immediately assigned > it to the storage people but have not responded with any meaningful > information. I have submitted several logs. > > I have found some discussion on problems with instability with gluster > 3.12.5. I would be willing to upgrade my gluster to a more stable version > if that's the culprit. I installed gluster using the ovirt gui and this is > the version the ovirt gui installed. > > Is there an ovirt health monitor available? Where should I be looking to > get a resolution the problems I'm facing. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/BL4M3JQA3IE... > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/QULCBXHTKSC... > > > > -- > > SANDRO BONAZZOLA > > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > > Red Hat EMEA <https://www.redhat.com/> > > sbonazzo(a)redhat.com > <https://red.ht/sig> > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/ECPLXX5JIG5... >

6 years, 2 months

1
0
0 / 0

oVirt upgrade to specific version

by Leo David

Hi, I have a running 4.2.7 hci cluster which I would upgrade to 4.2.8. If I do this in the standard manner (yum update in engine vm and then the nodes from engine UI) I assume it will go to 4.3, which I would rather avoid for now. Is there a way for getting it updated strictelly to 4.2.8 ? Thanks, Leo

6 years, 2 months

2
2
0 / 0

Centos 7.6 and kernel upgrading

by Erick Perez

Good day, What is the Ovirt position on upgrading Centos 7.6 kernel from 3.10 to latext/stable 4.x series? I cannot find a document related to the support.

6 years, 2 months

3
2
0 / 0

Ovirt Cluster completely unstable

by dscott＠umbctraining.com

I'm abandoning my production ovirt cluster due to instability. I have a 7 host cluster running about 300 vms and have been for over a year. It has become unstable over the past three days. I have random hosts both, compute and storage disconnecting. AND many vms disconnecting and becoming unusable. 7 host are 4 compute hosts running Ovirt 4.2.8 and three glusterfs hosts running 3.12.5. I submitted a bugzilla bug and they immediately assigned it to the storage people but have not responded with any meaningful information. I have submitted several logs. I have found some discussion on problems with instability with gluster 3.12.5. I would be willing to upgrade my gluster to a more stable version if that's the culprit. I installed gluster using the ovirt gui and this is the version the ovirt gui installed. Is there an ovirt health monitor available? Where should I be looking to get a resolution the problems I'm facing.

6 years, 2 months

9
13
0 / 0

access engine by http

by du_hongyu＠yeah.net

I want to access engine by http， after engine-setup success， I fix /etc/ovirt-engine/engine.conf.d/10-setup-protocols.conf ENGINE_FQDN=localhost.localdomain ENGINE_PROXY_ENABLED=false ENGINE_PROXY_HTTP_PORT=None ENGINE_PROXY_HTTPS_PORT=None ENGINE_AJP_ENABLED=false ENGINE_AJP_PORT=None ENGINE_HTTP_ENABLED=true ENGINE_HTTPS_ENABLED=false ENGINE_HTTP_PORT=8080 ENGINE_HTTPS_PORT=443 but I access http://ip:8080/ovirt-engine , still browser is redirect to https, I should how to disable redirect? Regards Hongyu Du

6 years, 2 months

3
11
0 / 0

ovirt-4.3 hyperconverged deployment - no option for "disc count" for JBOD

by feral

Vanilla install of ovirt-node-4.3 (iso). During hyperconverged wizard, there is no option for disc count for JBOD. This results in error during deployment. Disc Count option is available for all other raid levels. -- _____ Fact: 1. Ninjas are mammals. 2. Ninjas fight ALL the time. 3. The purpose of the ninja is to flip out and kill people.

6 years, 2 months

5
12
0 / 0

Upgrade from 4.2.7 to 4.3.0 troubles

by mariani.alberto＠libero.it

Hello All, I'm trying to upgrade a Self Hosted Engine installation from 4.2.7 to 4.3.0. I was able to update the Engine itself, but when I try the general update for both the Engine VM and the Self Hosted Nodes the update fails because the openvswitch-ovn-* packages want a long series of libraries as dependencies, all with the name librte_* Unfortunately, I don't think these exist in CentOs 7, so I'm having no luck in finding them. Am I doing something wrong? Best Regards, Alberto M.

6 years, 2 months

3
4
0 / 0

Error packages update after upgrade to ovirt 4.3

by Нон локалес

Hello. Anyone please help, cannot upgrade host, yum update going in error. https://pastebin.com/MWnsxVAa What i have done and didnt work: yum install dpdk yum clean all package-cleanup --cleandupes Its clean centos 7 with installed host role throught ovirt engine/

6 years, 2 months

3
2
1 / 0

Vnic-Port mirroring

by ada per

Hello everyone, I am trying to allow port mirroring through the Vnic profile but no matter what i do it stays grayed out. How can i enable this option? When i am creating a new VNIC profile the options ,port mirroring and passthrough are disabled. the version i am using is 4.2.8. Thanks!:)

6 years, 2 months

4
11
0 / 0

Re: Ovirt Cluster completely unstable

by Ryan Bullock

Just to add, after we updated to 4.3 our gluster just went south. Thankfully gluster is only secondary storage for us, and our primary storage is an ISCSI SAN. We migrated everything over to the SAN that we could, but a few VM's got corrupted by gluster (data was gone). Right now we just have gluster off and set to maintenance because the connectivity issues were causing our main cluster to continuously migrate VMs. Looking at the gluster hosts themselves I noticed that heal info would often report one brick down, even if ovirt didn't. Checking the status of glusterd would also show health checks failed. Feb 6 15:36:37 vmc3h1 glusterfs-virtstore[17036]: [2019-02-06 23:36:37.937041] M [MSGID: 113075] [posix-helpers.c:1957:posix_health_check_thread_proc] 0-VirstStore-posix: health-check failed, going down Feb 6 15:36:37 vmc3h1 glusterfs-virtstore[17036]: [2019-02-06 23:36:37.937561] M [MSGID: 113075] [posix-helpers.c:1975:posix_health_check_thread_proc] 0-VirstStore-posix: still alive! -> SIGTERM I think the health-check is failing (maybe erroneously) which is then killing the brick. When this happens it just causing a continuous cycle of brick up-down and healing, and in turn connectivity issues. This is our second time running into issues with gluster, so I think we are going to sideline it for awhile. -Ryan On Thu, Feb 14, 2019 at 12:47 PM Darryl Scott <dscott(a)umbctraining.com> wrote: > I do believe something went wrong after fully updating everything last > Friday. I updated all the ovirt compute nodes on Friday and gluster/engine > on Saturday. I have been experiencing these issues every since. I have > pour over engine.log and seems to be connection to storage issue. > > > ------------------------------ > *From:* Jayme <jaymef(a)gmail.com> > *Sent:* Thursday, February 14, 2019 1:52:59 AM > *To:* Darryl Scott > *Cc:* users > *Subject:* Re: [ovirt-users] Ovirt Cluster completely unstable > > I have a three node HCI gluster which was previously running 4.2 with zero > problems. I just upgraded it yesterday. I ran in to a few bugs right away > with the upgrade process, but aside from that I also discovered other users > with severe GlusterFS problems since the upgrade to new GlusterFS version. > It is less than 24 hours since I upgrade my cluster and I just got a notice > that one of my GlusterFS bricks is offline. There does appear to be a very > real and serious issue here with the latest updates. > > > On Wed, Feb 13, 2019 at 7:26 PM <dscott(a)umbctraining.com> wrote: > > I'm abandoning my production ovirt cluster due to instability. I have a > 7 host cluster running about 300 vms and have been for over a year. It has > become unstable over the past three days. I have random hosts both, > compute and storage disconnecting. AND many vms disconnecting and becoming > unusable. > > 7 host are 4 compute hosts running Ovirt 4.2.8 and three glusterfs hosts > running 3.12.5. I submitted a bugzilla bug and they immediately assigned > it to the storage people but have not responded with any meaningful > information. I have submitted several logs. > > I have found some discussion on problems with instability with gluster > 3.12.5. I would be willing to upgrade my gluster to a more stable version > if that's the culprit. I installed gluster using the ovirt gui and this is > the version the ovirt gui installed. > > Is there an ovirt health monitor available? Where should I be looking to > get a resolution the problems I'm facing. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/BL4M3JQA3IE... > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/IMUKFFANNJX... >

6 years, 2 months

1
0
0 / 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Users February 2019